Linux 6.14-rc1

[linux.git] / drivers / net / phy / adin.c

// SPDX-License-Identifier: GPL-2.0+
/*
 *  Driver for Analog Devices Industrial Ethernet PHYs
 *
 * Copyright 2019 Analog Devices Inc.
 */
#include <linux/kernel.h>
#include <linux/bitfield.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/ethtool_netlink.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/mii.h>
#include <linux/phy.h>
#include <linux/property.h>

#define PHY_ID_ADIN1200                         0x0283bc20
#define PHY_ID_ADIN1300                         0x0283bc30

#define ADIN1300_MII_EXT_REG_PTR                0x0010
#define ADIN1300_MII_EXT_REG_DATA               0x0011

#define ADIN1300_PHY_CTRL1                      0x0012
#define   ADIN1300_AUTO_MDI_EN                  BIT(10)
#define   ADIN1300_MAN_MDIX_EN                  BIT(9)
#define   ADIN1300_DIAG_CLK_EN                  BIT(2)

#define ADIN1300_RX_ERR_CNT                     0x0014

#define ADIN1300_PHY_CTRL_STATUS2               0x0015
#define   ADIN1300_NRG_PD_EN                    BIT(3)
#define   ADIN1300_NRG_PD_TX_EN                 BIT(2)
#define   ADIN1300_NRG_PD_STATUS                BIT(1)

#define ADIN1300_PHY_CTRL2                      0x0016
#define   ADIN1300_DOWNSPEED_AN_100_EN          BIT(11)
#define   ADIN1300_DOWNSPEED_AN_10_EN           BIT(10)
#define   ADIN1300_GROUP_MDIO_EN                BIT(6)
#define   ADIN1300_DOWNSPEEDS_EN        \
        (ADIN1300_DOWNSPEED_AN_100_EN | ADIN1300_DOWNSPEED_AN_10_EN)

#define ADIN1300_PHY_CTRL3                      0x0017
#define   ADIN1300_LINKING_EN                   BIT(13)
#define   ADIN1300_DOWNSPEED_RETRIES_MSK        GENMASK(12, 10)

#define ADIN1300_INT_MASK_REG                   0x0018
#define   ADIN1300_INT_MDIO_SYNC_EN             BIT(9)
#define   ADIN1300_INT_ANEG_STAT_CHNG_EN        BIT(8)
#define   ADIN1300_INT_ANEG_PAGE_RX_EN          BIT(6)
#define   ADIN1300_INT_IDLE_ERR_CNT_EN          BIT(5)
#define   ADIN1300_INT_MAC_FIFO_OU_EN           BIT(4)
#define   ADIN1300_INT_RX_STAT_CHNG_EN          BIT(3)
#define   ADIN1300_INT_LINK_STAT_CHNG_EN        BIT(2)
#define   ADIN1300_INT_SPEED_CHNG_EN            BIT(1)
#define   ADIN1300_INT_HW_IRQ_EN                BIT(0)
#define ADIN1300_INT_MASK_EN    \
        (ADIN1300_INT_LINK_STAT_CHNG_EN | ADIN1300_INT_HW_IRQ_EN)
#define ADIN1300_INT_STATUS_REG                 0x0019

#define ADIN1300_PHY_STATUS1                    0x001a
#define   ADIN1300_PAIR_01_SWAP                 BIT(11)

/* EEE register addresses, accessible via Clause 22 access using
 * ADIN1300_MII_EXT_REG_PTR & ADIN1300_MII_EXT_REG_DATA.
 * The bit-fields are the same as specified by IEEE for EEE.
 */
#define ADIN1300_EEE_CAP_REG                    0x8000
#define ADIN1300_EEE_ADV_REG                    0x8001
#define ADIN1300_EEE_LPABLE_REG                 0x8002

#define ADIN1300_FLD_EN_REG                     0x8E27
#define   ADIN1300_FLD_PCS_ERR_100_EN           BIT(7)
#define   ADIN1300_FLD_PCS_ERR_1000_EN          BIT(6)
#define   ADIN1300_FLD_SLCR_OUT_STUCK_100_EN    BIT(5)
#define   ADIN1300_FLD_SLCR_OUT_STUCK_1000_EN   BIT(4)
#define   ADIN1300_FLD_SLCR_IN_ZDET_100_EN      BIT(3)
#define   ADIN1300_FLD_SLCR_IN_ZDET_1000_EN     BIT(2)
#define   ADIN1300_FLD_SLCR_IN_INVLD_100_EN     BIT(1)
#define   ADIN1300_FLD_SLCR_IN_INVLD_1000_EN    BIT(0)
/* These bits are the ones which are enabled by default. */
#define ADIN1300_FLD_EN_ON      \
        (ADIN1300_FLD_SLCR_OUT_STUCK_100_EN | \
         ADIN1300_FLD_SLCR_OUT_STUCK_1000_EN | \
         ADIN1300_FLD_SLCR_IN_ZDET_100_EN | \
         ADIN1300_FLD_SLCR_IN_ZDET_1000_EN | \
         ADIN1300_FLD_SLCR_IN_INVLD_1000_EN)

#define ADIN1300_CLOCK_STOP_REG                 0x9400
#define ADIN1300_LPI_WAKE_ERR_CNT_REG           0xa000

#define ADIN1300_CDIAG_RUN                      0xba1b
#define   ADIN1300_CDIAG_RUN_EN                 BIT(0)

/*
 * The XSIM3/2/1 and XSHRT3/2/1 are actually relative.
 * For CDIAG_DTLD_RSLTS(0) it's ADIN1300_CDIAG_RSLT_XSIM3/2/1
 * For CDIAG_DTLD_RSLTS(1) it's ADIN1300_CDIAG_RSLT_XSIM3/2/0
 * For CDIAG_DTLD_RSLTS(2) it's ADIN1300_CDIAG_RSLT_XSIM3/1/0
 * For CDIAG_DTLD_RSLTS(3) it's ADIN1300_CDIAG_RSLT_XSIM2/1/0
 */
#define ADIN1300_CDIAG_DTLD_RSLTS(x)            (0xba1d + (x))
#define   ADIN1300_CDIAG_RSLT_BUSY              BIT(10)
#define   ADIN1300_CDIAG_RSLT_XSIM3             BIT(9)
#define   ADIN1300_CDIAG_RSLT_XSIM2             BIT(8)
#define   ADIN1300_CDIAG_RSLT_XSIM1             BIT(7)
#define   ADIN1300_CDIAG_RSLT_SIM               BIT(6)
#define   ADIN1300_CDIAG_RSLT_XSHRT3            BIT(5)
#define   ADIN1300_CDIAG_RSLT_XSHRT2            BIT(4)
#define   ADIN1300_CDIAG_RSLT_XSHRT1            BIT(3)
#define   ADIN1300_CDIAG_RSLT_SHRT              BIT(2)
#define   ADIN1300_CDIAG_RSLT_OPEN              BIT(1)
#define   ADIN1300_CDIAG_RSLT_GOOD              BIT(0)

#define ADIN1300_CDIAG_FLT_DIST(x)              (0xba21 + (x))

#define ADIN1300_GE_SOFT_RESET_REG              0xff0c
#define   ADIN1300_GE_SOFT_RESET                BIT(0)

#define ADIN1300_GE_CLK_CFG_REG                 0xff1f
#define   ADIN1300_GE_CLK_CFG_MASK              GENMASK(5, 0)
#define   ADIN1300_GE_CLK_CFG_RCVR_125          BIT(5)
#define   ADIN1300_GE_CLK_CFG_FREE_125          BIT(4)
#define   ADIN1300_GE_CLK_CFG_REF_EN            BIT(3)
#define   ADIN1300_GE_CLK_CFG_HRT_RCVR          BIT(2)
#define   ADIN1300_GE_CLK_CFG_HRT_FREE          BIT(1)
#define   ADIN1300_GE_CLK_CFG_25                BIT(0)

#define ADIN1300_GE_RGMII_CFG_REG               0xff23
#define   ADIN1300_GE_RGMII_RX_MSK              GENMASK(8, 6)
#define   ADIN1300_GE_RGMII_RX_SEL(x)           \
                FIELD_PREP(ADIN1300_GE_RGMII_RX_MSK, x)
#define   ADIN1300_GE_RGMII_GTX_MSK             GENMASK(5, 3)
#define   ADIN1300_GE_RGMII_GTX_SEL(x)          \
                FIELD_PREP(ADIN1300_GE_RGMII_GTX_MSK, x)
#define   ADIN1300_GE_RGMII_RXID_EN             BIT(2)
#define   ADIN1300_GE_RGMII_TXID_EN             BIT(1)
#define   ADIN1300_GE_RGMII_EN                  BIT(0)

/* RGMII internal delay settings for rx and tx for ADIN1300 */
#define ADIN1300_RGMII_1_60_NS                  0x0001
#define ADIN1300_RGMII_1_80_NS                  0x0002
#define ADIN1300_RGMII_2_00_NS                  0x0000
#define ADIN1300_RGMII_2_20_NS                  0x0006
#define ADIN1300_RGMII_2_40_NS                  0x0007

#define ADIN1300_GE_RMII_CFG_REG                0xff24
#define   ADIN1300_GE_RMII_FIFO_DEPTH_MSK       GENMASK(6, 4)
#define   ADIN1300_GE_RMII_FIFO_DEPTH_SEL(x)    \
                FIELD_PREP(ADIN1300_GE_RMII_FIFO_DEPTH_MSK, x)
#define   ADIN1300_GE_RMII_EN                   BIT(0)

/* RMII fifo depth values */
#define ADIN1300_RMII_4_BITS                    0x0000
#define ADIN1300_RMII_8_BITS                    0x0001
#define ADIN1300_RMII_12_BITS                   0x0002
#define ADIN1300_RMII_16_BITS                   0x0003
#define ADIN1300_RMII_20_BITS                   0x0004
#define ADIN1300_RMII_24_BITS                   0x0005

/**
 * struct adin_cfg_reg_map - map a config value to aregister value
 * @cfg:        value in device configuration
 * @reg:        value in the register
 */
struct adin_cfg_reg_map {
        int cfg;
        int reg;
};

static const struct adin_cfg_reg_map adin_rgmii_delays[] = {
        { 1600, ADIN1300_RGMII_1_60_NS },
        { 1800, ADIN1300_RGMII_1_80_NS },
        { 2000, ADIN1300_RGMII_2_00_NS },
        { 2200, ADIN1300_RGMII_2_20_NS },
        { 2400, ADIN1300_RGMII_2_40_NS },
        { },
};

static const struct adin_cfg_reg_map adin_rmii_fifo_depths[] = {
        { 4,  ADIN1300_RMII_4_BITS },
        { 8,  ADIN1300_RMII_8_BITS },
        { 12, ADIN1300_RMII_12_BITS },
        { 16, ADIN1300_RMII_16_BITS },
        { 20, ADIN1300_RMII_20_BITS },
        { 24, ADIN1300_RMII_24_BITS },
        { },
};

/**
 * struct adin_clause45_mmd_map - map to convert Clause 45 regs to Clause 22
 * @devad:              device address used in Clause 45 access
 * @cl45_regnum:        register address defined by Clause 45
 * @adin_regnum:        equivalent register address accessible via Clause 22
 */
struct adin_clause45_mmd_map {
        int devad;
        u16 cl45_regnum;
        u16 adin_regnum;
};

static const struct adin_clause45_mmd_map adin_clause45_mmd_map[] = {
        { MDIO_MMD_PCS, MDIO_PCS_EEE_ABLE,      ADIN1300_EEE_CAP_REG },
        { MDIO_MMD_AN,  MDIO_AN_EEE_LPABLE,     ADIN1300_EEE_LPABLE_REG },
        { MDIO_MMD_AN,  MDIO_AN_EEE_ADV,        ADIN1300_EEE_ADV_REG },
        { MDIO_MMD_PCS, MDIO_CTRL1,             ADIN1300_CLOCK_STOP_REG },
        { MDIO_MMD_PCS, MDIO_PCS_EEE_WK_ERR,    ADIN1300_LPI_WAKE_ERR_CNT_REG },
};

struct adin_hw_stat {
        const char *string;
        u16 reg1;
        u16 reg2;
};

static const struct adin_hw_stat adin_hw_stats[] = {
        { "total_frames_checked_count",         0x940A, 0x940B }, /* hi + lo */
        { "length_error_frames_count",          0x940C },
        { "alignment_error_frames_count",       0x940D },
        { "symbol_error_count",                 0x940E },
        { "oversized_frames_count",             0x940F },
        { "undersized_frames_count",            0x9410 },
        { "odd_nibble_frames_count",            0x9411 },
        { "odd_preamble_packet_count",          0x9412 },
        { "dribble_bits_frames_count",          0x9413 },
        { "false_carrier_events_count",         0x9414 },
};

/**
 * struct adin_priv - ADIN PHY driver private data
 * @stats:              statistic counters for the PHY
 */
struct adin_priv {
        u64                     stats[ARRAY_SIZE(adin_hw_stats)];
};

static int adin_lookup_reg_value(const struct adin_cfg_reg_map *tbl, int cfg)
{
        size_t i;

        for (i = 0; tbl[i].cfg; i++) {
                if (tbl[i].cfg == cfg)
                        return tbl[i].reg;
        }

        return -EINVAL;
}

static u32 adin_get_reg_value(struct phy_device *phydev,
                              const char *prop_name,
                              const struct adin_cfg_reg_map *tbl,
                              u32 dflt)
{
        struct device *dev = &phydev->mdio.dev;
        u32 val;
        int rc;

        if (device_property_read_u32(dev, prop_name, &val))
                return dflt;

        rc = adin_lookup_reg_value(tbl, val);
        if (rc < 0) {
                phydev_warn(phydev,
                            "Unsupported value %u for %s using default (%u)\n",
                            val, prop_name, dflt);
                return dflt;
        }

        return rc;
}

static int adin_config_rgmii_mode(struct phy_device *phydev)
{
        u32 val;
        int reg;

        if (!phy_interface_is_rgmii(phydev))
                return phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
                                          ADIN1300_GE_RGMII_CFG_REG,
                                          ADIN1300_GE_RGMII_EN);

        reg = phy_read_mmd(phydev, MDIO_MMD_VEND1, ADIN1300_GE_RGMII_CFG_REG);
        if (reg < 0)
                return reg;

        reg |= ADIN1300_GE_RGMII_EN;

        if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
            phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
                reg |= ADIN1300_GE_RGMII_RXID_EN;

                val = adin_get_reg_value(phydev, "adi,rx-internal-delay-ps",
                                         adin_rgmii_delays,
                                         ADIN1300_RGMII_2_00_NS);
                reg &= ~ADIN1300_GE_RGMII_RX_MSK;
                reg |= ADIN1300_GE_RGMII_RX_SEL(val);
        } else {
                reg &= ~ADIN1300_GE_RGMII_RXID_EN;
        }

        if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
            phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
                reg |= ADIN1300_GE_RGMII_TXID_EN;

                val = adin_get_reg_value(phydev, "adi,tx-internal-delay-ps",
                                         adin_rgmii_delays,
                                         ADIN1300_RGMII_2_00_NS);
                reg &= ~ADIN1300_GE_RGMII_GTX_MSK;
                reg |= ADIN1300_GE_RGMII_GTX_SEL(val);
        } else {
                reg &= ~ADIN1300_GE_RGMII_TXID_EN;
        }

        return phy_write_mmd(phydev, MDIO_MMD_VEND1,
                             ADIN1300_GE_RGMII_CFG_REG, reg);
}

static int adin_config_rmii_mode(struct phy_device *phydev)
{
        u32 val;
        int reg;

        if (phydev->interface != PHY_INTERFACE_MODE_RMII)
                return phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
                                          ADIN1300_GE_RMII_CFG_REG,
                                          ADIN1300_GE_RMII_EN);

        reg = phy_read_mmd(phydev, MDIO_MMD_VEND1, ADIN1300_GE_RMII_CFG_REG);
        if (reg < 0)
                return reg;

        reg |= ADIN1300_GE_RMII_EN;

        val = adin_get_reg_value(phydev, "adi,fifo-depth-bits",
                                 adin_rmii_fifo_depths,
                                 ADIN1300_RMII_8_BITS);

        reg &= ~ADIN1300_GE_RMII_FIFO_DEPTH_MSK;
        reg |= ADIN1300_GE_RMII_FIFO_DEPTH_SEL(val);

        return phy_write_mmd(phydev, MDIO_MMD_VEND1,
                             ADIN1300_GE_RMII_CFG_REG, reg);
}

static int adin_get_downshift(struct phy_device *phydev, u8 *data)
{
        int val, cnt, enable;

        val = phy_read(phydev, ADIN1300_PHY_CTRL2);
        if (val < 0)
                return val;

        cnt = phy_read(phydev, ADIN1300_PHY_CTRL3);
        if (cnt < 0)
                return cnt;

        enable = FIELD_GET(ADIN1300_DOWNSPEEDS_EN, val);
        cnt = FIELD_GET(ADIN1300_DOWNSPEED_RETRIES_MSK, cnt);

        *data = (enable && cnt) ? cnt : DOWNSHIFT_DEV_DISABLE;

        return 0;
}

static int adin_set_downshift(struct phy_device *phydev, u8 cnt)
{
        u16 val;
        int rc;

        if (cnt == DOWNSHIFT_DEV_DISABLE)
                return phy_clear_bits(phydev, ADIN1300_PHY_CTRL2,
                                      ADIN1300_DOWNSPEEDS_EN);

        if (cnt > 7)
                return -E2BIG;

        val = FIELD_PREP(ADIN1300_DOWNSPEED_RETRIES_MSK, cnt);

        rc = phy_modify(phydev, ADIN1300_PHY_CTRL3,
                        ADIN1300_DOWNSPEED_RETRIES_MSK,
                        val);
        if (rc < 0)
                return rc;

        return phy_set_bits(phydev, ADIN1300_PHY_CTRL2,
                            ADIN1300_DOWNSPEEDS_EN);
}

static int adin_get_edpd(struct phy_device *phydev, u16 *tx_interval)
{
        int val;

        val = phy_read(phydev, ADIN1300_PHY_CTRL_STATUS2);
        if (val < 0)
                return val;

        if (ADIN1300_NRG_PD_EN & val) {
                if (val & ADIN1300_NRG_PD_TX_EN)
                        /* default is 1 second */
                        *tx_interval = ETHTOOL_PHY_EDPD_DFLT_TX_MSECS;
                else
                        *tx_interval = ETHTOOL_PHY_EDPD_NO_TX;
        } else {
                *tx_interval = ETHTOOL_PHY_EDPD_DISABLE;
        }

        return 0;
}

static int adin_set_edpd(struct phy_device *phydev, u16 tx_interval)
{
        u16 val;

        if (tx_interval == ETHTOOL_PHY_EDPD_DISABLE)
                return phy_clear_bits(phydev, ADIN1300_PHY_CTRL_STATUS2,
                                (ADIN1300_NRG_PD_EN | ADIN1300_NRG_PD_TX_EN));

        val = ADIN1300_NRG_PD_EN;

        switch (tx_interval) {
        case 1000: /* 1 second */
                fallthrough;
        case ETHTOOL_PHY_EDPD_DFLT_TX_MSECS:
                val |= ADIN1300_NRG_PD_TX_EN;
                fallthrough;
        case ETHTOOL_PHY_EDPD_NO_TX:
                break;
        default:
                return -EINVAL;
        }

        return phy_modify(phydev, ADIN1300_PHY_CTRL_STATUS2,
                          (ADIN1300_NRG_PD_EN | ADIN1300_NRG_PD_TX_EN),
                          val);
}

static int adin_get_fast_down(struct phy_device *phydev, u8 *msecs)
{
        int reg;

        reg = phy_read_mmd(phydev, MDIO_MMD_VEND1, ADIN1300_FLD_EN_REG);
        if (reg < 0)
                return reg;

        if (reg & ADIN1300_FLD_EN_ON)
                *msecs = ETHTOOL_PHY_FAST_LINK_DOWN_ON;
        else
                *msecs = ETHTOOL_PHY_FAST_LINK_DOWN_OFF;

        return 0;
}

static int adin_set_fast_down(struct phy_device *phydev, const u8 *msecs)
{
        if (*msecs == ETHTOOL_PHY_FAST_LINK_DOWN_ON)
                return phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
                                        ADIN1300_FLD_EN_REG,
                                        ADIN1300_FLD_EN_ON);

        if (*msecs == ETHTOOL_PHY_FAST_LINK_DOWN_OFF)
                return phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
                                          ADIN1300_FLD_EN_REG,
                                          ADIN1300_FLD_EN_ON);

        return -EINVAL;
}

static int adin_get_tunable(struct phy_device *phydev,
                            struct ethtool_tunable *tuna, void *data)
{
        switch (tuna->id) {
        case ETHTOOL_PHY_DOWNSHIFT:
                return adin_get_downshift(phydev, data);
        case ETHTOOL_PHY_EDPD:
                return adin_get_edpd(phydev, data);
        case ETHTOOL_PHY_FAST_LINK_DOWN:
                return adin_get_fast_down(phydev, data);
        default:
                return -EOPNOTSUPP;
        }
}

static int adin_set_tunable(struct phy_device *phydev,
                            struct ethtool_tunable *tuna, const void *data)
{
        switch (tuna->id) {
        case ETHTOOL_PHY_DOWNSHIFT:
                return adin_set_downshift(phydev, *(const u8 *)data);
        case ETHTOOL_PHY_EDPD:
                return adin_set_edpd(phydev, *(const u16 *)data);
        case ETHTOOL_PHY_FAST_LINK_DOWN:
                return adin_set_fast_down(phydev, data);
        default:
                return -EOPNOTSUPP;
        }
}

static int adin_config_clk_out(struct phy_device *phydev)
{
        struct device *dev = &phydev->mdio.dev;
        const char *val = NULL;
        u8 sel = 0;

        device_property_read_string(dev, "adi,phy-output-clock", &val);
        if (!val) {
                /* property not present, do not enable GP_CLK pin */
        } else if (strcmp(val, "25mhz-reference") == 0) {
                sel |= ADIN1300_GE_CLK_CFG_25;
        } else if (strcmp(val, "125mhz-free-running") == 0) {
                sel |= ADIN1300_GE_CLK_CFG_FREE_125;
        } else if (strcmp(val, "adaptive-free-running") == 0) {
                sel |= ADIN1300_GE_CLK_CFG_HRT_FREE;
        } else {
                phydev_err(phydev, "invalid adi,phy-output-clock\n");
                return -EINVAL;
        }

        if (device_property_read_bool(dev, "adi,phy-output-reference-clock"))
                sel |= ADIN1300_GE_CLK_CFG_REF_EN;

        return phy_modify_mmd(phydev, MDIO_MMD_VEND1, ADIN1300_GE_CLK_CFG_REG,
                              ADIN1300_GE_CLK_CFG_MASK, sel);
}

static int adin_config_init(struct phy_device *phydev)
{
        int rc;

        phydev->mdix_ctrl = ETH_TP_MDI_AUTO;

        rc = adin_config_rgmii_mode(phydev);
        if (rc < 0)
                return rc;

        rc = adin_config_rmii_mode(phydev);
        if (rc < 0)
                return rc;

        rc = adin_set_downshift(phydev, 4);
        if (rc < 0)
                return rc;

        rc = adin_set_edpd(phydev, ETHTOOL_PHY_EDPD_DFLT_TX_MSECS);
        if (rc < 0)
                return rc;

        rc = adin_config_clk_out(phydev);
        if (rc < 0)
                return rc;

        phydev_dbg(phydev, "PHY is using mode '%s'\n",
                   phy_modes(phydev->interface));

        return 0;
}

static int adin_phy_ack_intr(struct phy_device *phydev)
{
        /* Clear pending interrupts */
        int rc = phy_read(phydev, ADIN1300_INT_STATUS_REG);

        return rc < 0 ? rc : 0;
}

static int adin_phy_config_intr(struct phy_device *phydev)
{
        int err;

        if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
                err = adin_phy_ack_intr(phydev);
                if (err)
                        return err;

                err = phy_set_bits(phydev, ADIN1300_INT_MASK_REG,
                                   ADIN1300_INT_MASK_EN);
        } else {
                err = phy_clear_bits(phydev, ADIN1300_INT_MASK_REG,
                                     ADIN1300_INT_MASK_EN);
                if (err)
                        return err;

                err = adin_phy_ack_intr(phydev);
        }

        return err;
}

static irqreturn_t adin_phy_handle_interrupt(struct phy_device *phydev)
{
        int irq_status;

        irq_status = phy_read(phydev, ADIN1300_INT_STATUS_REG);
        if (irq_status < 0) {
                phy_error(phydev);
                return IRQ_NONE;
        }

        if (!(irq_status & ADIN1300_INT_LINK_STAT_CHNG_EN))
                return IRQ_NONE;

        phy_trigger_machine(phydev);

        return IRQ_HANDLED;
}

static int adin_cl45_to_adin_reg(struct phy_device *phydev, int devad,
                                 u16 cl45_regnum)
{
        const struct adin_clause45_mmd_map *m;
        int i;

        if (devad == MDIO_MMD_VEND1)
                return cl45_regnum;

        for (i = 0; i < ARRAY_SIZE(adin_clause45_mmd_map); i++) {
                m = &adin_clause45_mmd_map[i];
                if (m->devad == devad && m->cl45_regnum == cl45_regnum)
                        return m->adin_regnum;
        }

        phydev_err(phydev,
                   "No translation available for devad: %d reg: %04x\n",
                   devad, cl45_regnum);

        return -EINVAL;
}

static int adin_read_mmd(struct phy_device *phydev, int devad, u16 regnum)
{
        struct mii_bus *bus = phydev->mdio.bus;
        int phy_addr = phydev->mdio.addr;
        int adin_regnum;
        int err;

        adin_regnum = adin_cl45_to_adin_reg(phydev, devad, regnum);
        if (adin_regnum < 0)
                return adin_regnum;

        err = __mdiobus_write(bus, phy_addr, ADIN1300_MII_EXT_REG_PTR,
                              adin_regnum);
        if (err)
                return err;

        return __mdiobus_read(bus, phy_addr, ADIN1300_MII_EXT_REG_DATA);
}

static int adin_write_mmd(struct phy_device *phydev, int devad, u16 regnum,
                          u16 val)
{
        struct mii_bus *bus = phydev->mdio.bus;
        int phy_addr = phydev->mdio.addr;
        int adin_regnum;
        int err;

        adin_regnum = adin_cl45_to_adin_reg(phydev, devad, regnum);
        if (adin_regnum < 0)
                return adin_regnum;

        err = __mdiobus_write(bus, phy_addr, ADIN1300_MII_EXT_REG_PTR,
                              adin_regnum);
        if (err)
                return err;

        return __mdiobus_write(bus, phy_addr, ADIN1300_MII_EXT_REG_DATA, val);
}

static int adin_config_mdix(struct phy_device *phydev)
{
        bool auto_en, mdix_en;
        int reg;

        mdix_en = false;
        auto_en = false;
        switch (phydev->mdix_ctrl) {
        case ETH_TP_MDI:
                break;
        case ETH_TP_MDI_X:
                mdix_en = true;
                break;
        case ETH_TP_MDI_AUTO:
                auto_en = true;
                break;
        default:
                return -EINVAL;
        }

        reg = phy_read(phydev, ADIN1300_PHY_CTRL1);
        if (reg < 0)
                return reg;

        if (mdix_en)
                reg |= ADIN1300_MAN_MDIX_EN;
        else
                reg &= ~ADIN1300_MAN_MDIX_EN;

        if (auto_en)
                reg |= ADIN1300_AUTO_MDI_EN;
        else
                reg &= ~ADIN1300_AUTO_MDI_EN;

        return phy_write(phydev, ADIN1300_PHY_CTRL1, reg);
}

static int adin_config_aneg(struct phy_device *phydev)
{
        int ret;

        ret = phy_clear_bits(phydev, ADIN1300_PHY_CTRL1, ADIN1300_DIAG_CLK_EN);
        if (ret < 0)
                return ret;

        ret = phy_set_bits(phydev, ADIN1300_PHY_CTRL3, ADIN1300_LINKING_EN);
        if (ret < 0)
                return ret;

        ret = adin_config_mdix(phydev);
        if (ret)
                return ret;

        return genphy_config_aneg(phydev);
}

static int adin_mdix_update(struct phy_device *phydev)
{
        bool auto_en, mdix_en;
        bool swapped;
        int reg;

        reg = phy_read(phydev, ADIN1300_PHY_CTRL1);
        if (reg < 0)
                return reg;

        auto_en = !!(reg & ADIN1300_AUTO_MDI_EN);
        mdix_en = !!(reg & ADIN1300_MAN_MDIX_EN);

        /* If MDI/MDIX is forced, just read it from the control reg */
        if (!auto_en) {
                if (mdix_en)
                        phydev->mdix = ETH_TP_MDI_X;
                else
                        phydev->mdix = ETH_TP_MDI;
                return 0;
        }

        /**
         * Otherwise, we need to deduce it from the PHY status2 reg.
         * When Auto-MDI is enabled, the ADIN1300_MAN_MDIX_EN bit implies
         * a preference for MDIX when it is set.
         */
        reg = phy_read(phydev, ADIN1300_PHY_STATUS1);
        if (reg < 0)
                return reg;

        swapped = !!(reg & ADIN1300_PAIR_01_SWAP);

        if (mdix_en != swapped)
                phydev->mdix = ETH_TP_MDI_X;
        else
                phydev->mdix = ETH_TP_MDI;

        return 0;
}

static int adin_read_status(struct phy_device *phydev)
{
        int ret;

        ret = adin_mdix_update(phydev);
        if (ret < 0)
                return ret;

        return genphy_read_status(phydev);
}

static int adin_soft_reset(struct phy_device *phydev)
{
        int rc;

        /* The reset bit is self-clearing, set it and wait */
        rc = phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
                              ADIN1300_GE_SOFT_RESET_REG,
                              ADIN1300_GE_SOFT_RESET);
        if (rc < 0)
                return rc;

        msleep(20);

        /* If we get a read error something may be wrong */
        rc = phy_read_mmd(phydev, MDIO_MMD_VEND1,
                          ADIN1300_GE_SOFT_RESET_REG);

        return rc < 0 ? rc : 0;
}

static int adin_get_sset_count(struct phy_device *phydev)
{
        return ARRAY_SIZE(adin_hw_stats);
}

static void adin_get_strings(struct phy_device *phydev, u8 *data)
{
        int i;

        for (i = 0; i < ARRAY_SIZE(adin_hw_stats); i++)
                ethtool_puts(&data, adin_hw_stats[i].string);
}

static int adin_read_mmd_stat_regs(struct phy_device *phydev,
                                   const struct adin_hw_stat *stat,
                                   u32 *val)
{
        int ret;

        ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, stat->reg1);
        if (ret < 0)
                return ret;

        *val = (ret & 0xffff);

        if (stat->reg2 == 0)
                return 0;

        ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, stat->reg2);
        if (ret < 0)
                return ret;

        *val <<= 16;
        *val |= (ret & 0xffff);

        return 0;
}

static u64 adin_get_stat(struct phy_device *phydev, int i)
{
        const struct adin_hw_stat *stat = &adin_hw_stats[i];
        struct adin_priv *priv = phydev->priv;
        u32 val;
        int ret;

        if (stat->reg1 > 0x1f) {
                ret = adin_read_mmd_stat_regs(phydev, stat, &val);
                if (ret < 0)
                        return (u64)(~0);
        } else {
                ret = phy_read(phydev, stat->reg1);
                if (ret < 0)
                        return (u64)(~0);
                val = (ret & 0xffff);
        }

        priv->stats[i] += val;

        return priv->stats[i];
}

static void adin_get_stats(struct phy_device *phydev,
                           struct ethtool_stats *stats, u64 *data)
{
        int i, rc;

        /* latch copies of all the frame-checker counters */
        rc = phy_read(phydev, ADIN1300_RX_ERR_CNT);
        if (rc < 0)
                return;

        for (i = 0; i < ARRAY_SIZE(adin_hw_stats); i++)
                data[i] = adin_get_stat(phydev, i);
}

static int adin_probe(struct phy_device *phydev)
{
        struct device *dev = &phydev->mdio.dev;
        struct adin_priv *priv;

        priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
        if (!priv)
                return -ENOMEM;

        phydev->priv = priv;

        return 0;
}

static int adin_cable_test_start(struct phy_device *phydev)
{
        int ret;

        ret = phy_clear_bits(phydev, ADIN1300_PHY_CTRL3, ADIN1300_LINKING_EN);
        if (ret < 0)
                return ret;

        ret = phy_clear_bits(phydev, ADIN1300_PHY_CTRL1, ADIN1300_DIAG_CLK_EN);
        if (ret < 0)
                return ret;

        /* wait a bit for the clock to stabilize */
        msleep(50);

        return phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, ADIN1300_CDIAG_RUN,
                                ADIN1300_CDIAG_RUN_EN);
}

static int adin_cable_test_report_trans(int result)
{
        int mask;

        if (result & ADIN1300_CDIAG_RSLT_GOOD)
                return ETHTOOL_A_CABLE_RESULT_CODE_OK;
        if (result & ADIN1300_CDIAG_RSLT_OPEN)
                return ETHTOOL_A_CABLE_RESULT_CODE_OPEN;

        /* short with other pairs */
        mask = ADIN1300_CDIAG_RSLT_XSHRT3 |
               ADIN1300_CDIAG_RSLT_XSHRT2 |
               ADIN1300_CDIAG_RSLT_XSHRT1;
        if (result & mask)
                return ETHTOOL_A_CABLE_RESULT_CODE_CROSS_SHORT;

        if (result & ADIN1300_CDIAG_RSLT_SHRT)
                return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT;

        return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC;
}

static int adin_cable_test_report_pair(struct phy_device *phydev,
                                       unsigned int pair)
{
        int fault_rslt;
        int ret;

        ret = phy_read_mmd(phydev, MDIO_MMD_VEND1,
                           ADIN1300_CDIAG_DTLD_RSLTS(pair));
        if (ret < 0)
                return ret;

        fault_rslt = adin_cable_test_report_trans(ret);

        ret = ethnl_cable_test_result(phydev, pair, fault_rslt);
        if (ret < 0)
                return ret;

        ret = phy_read_mmd(phydev, MDIO_MMD_VEND1,
                           ADIN1300_CDIAG_FLT_DIST(pair));
        if (ret < 0)
                return ret;

        switch (fault_rslt) {
        case ETHTOOL_A_CABLE_RESULT_CODE_OPEN:
        case ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT:
        case ETHTOOL_A_CABLE_RESULT_CODE_CROSS_SHORT:
                return ethnl_cable_test_fault_length(phydev, pair, ret * 100);
        default:
                return  0;
        }
}

static int adin_cable_test_report(struct phy_device *phydev)
{
        unsigned int pair;
        int ret;

        for (pair = ETHTOOL_A_CABLE_PAIR_A; pair <= ETHTOOL_A_CABLE_PAIR_D; pair++) {
                ret = adin_cable_test_report_pair(phydev, pair);
                if (ret < 0)
                        return ret;
        }

        return 0;
}

static int adin_cable_test_get_status(struct phy_device *phydev,
                                      bool *finished)
{
        int ret;

        *finished = false;

        ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, ADIN1300_CDIAG_RUN);
        if (ret < 0)
                return ret;

        if (ret & ADIN1300_CDIAG_RUN_EN)
                return 0;

        *finished = true;

        return adin_cable_test_report(phydev);
}

static struct phy_driver adin_driver[] = {
        {
                PHY_ID_MATCH_MODEL(PHY_ID_ADIN1200),
                .name           = "ADIN1200",
                .flags          = PHY_POLL_CABLE_TEST,
                .probe          = adin_probe,
                .config_init    = adin_config_init,
                .soft_reset     = adin_soft_reset,
                .config_aneg    = adin_config_aneg,
                .read_status    = adin_read_status,
                .get_tunable    = adin_get_tunable,
                .set_tunable    = adin_set_tunable,
                .config_intr    = adin_phy_config_intr,
                .handle_interrupt = adin_phy_handle_interrupt,
                .get_sset_count = adin_get_sset_count,
                .get_strings    = adin_get_strings,
                .get_stats      = adin_get_stats,
                .resume         = genphy_resume,
                .suspend        = genphy_suspend,
                .read_mmd       = adin_read_mmd,
                .write_mmd      = adin_write_mmd,
                .cable_test_start       = adin_cable_test_start,
                .cable_test_get_status  = adin_cable_test_get_status,
        },
        {
                PHY_ID_MATCH_MODEL(PHY_ID_ADIN1300),
                .name           = "ADIN1300",
                .flags          = PHY_POLL_CABLE_TEST,
                .probe          = adin_probe,
                .config_init    = adin_config_init,
                .soft_reset     = adin_soft_reset,
                .config_aneg    = adin_config_aneg,
                .read_status    = adin_read_status,
                .get_tunable    = adin_get_tunable,
                .set_tunable    = adin_set_tunable,
                .config_intr    = adin_phy_config_intr,
                .handle_interrupt = adin_phy_handle_interrupt,
                .get_sset_count = adin_get_sset_count,
                .get_strings    = adin_get_strings,
                .get_stats      = adin_get_stats,
                .resume         = genphy_resume,
                .suspend        = genphy_suspend,
                .read_mmd       = adin_read_mmd,
                .write_mmd      = adin_write_mmd,
                .cable_test_start       = adin_cable_test_start,
                .cable_test_get_status  = adin_cable_test_get_status,
        },
};

module_phy_driver(adin_driver);

static const struct mdio_device_id __maybe_unused adin_tbl[] = {
        { PHY_ID_MATCH_MODEL(PHY_ID_ADIN1200) },
        { PHY_ID_MATCH_MODEL(PHY_ID_ADIN1300) },
        { }
};

MODULE_DEVICE_TABLE(mdio, adin_tbl);
MODULE_DESCRIPTION("Analog Devices Industrial Ethernet PHY driver");
MODULE_LICENSE("GPL");