1 // SPDX-License-Identifier: GPL-2.0-only
2 /******************************************************************************
4 * Copyright(c) 2003 - 2014 Intel Corporation. All rights reserved.
5 * Copyright(c) 2015 Intel Deutschland GmbH
6 *****************************************************************************/
8 #include <linux/etherdevice.h>
10 #include "iwl-modparams.h"
16 * initialize rxon structure with default values from eeprom
18 void iwl_connection_init_rx_config(struct iwl_priv
*priv
,
19 struct iwl_rxon_context
*ctx
)
21 memset(&ctx
->staging
, 0, sizeof(ctx
->staging
));
24 ctx
->staging
.dev_type
= ctx
->unused_devtype
;
26 switch (ctx
->vif
->type
) {
27 case NL80211_IFTYPE_AP
:
28 ctx
->staging
.dev_type
= ctx
->ap_devtype
;
31 case NL80211_IFTYPE_STATION
:
32 ctx
->staging
.dev_type
= ctx
->station_devtype
;
33 ctx
->staging
.filter_flags
= RXON_FILTER_ACCEPT_GRP_MSK
;
36 case NL80211_IFTYPE_ADHOC
:
37 ctx
->staging
.dev_type
= ctx
->ibss_devtype
;
38 ctx
->staging
.flags
= RXON_FLG_SHORT_PREAMBLE_MSK
;
39 ctx
->staging
.filter_flags
= RXON_FILTER_BCON_AWARE_MSK
|
40 RXON_FILTER_ACCEPT_GRP_MSK
;
43 case NL80211_IFTYPE_MONITOR
:
44 ctx
->staging
.dev_type
= RXON_DEV_TYPE_SNIFFER
;
48 IWL_ERR(priv
, "Unsupported interface type %d\n",
54 /* TODO: Figure out when short_preamble would be set and cache from
56 if (!hw_to_local(priv
->hw
)->short_preamble
)
57 ctx
->staging
.flags
&= ~RXON_FLG_SHORT_PREAMBLE_MSK
;
59 ctx
->staging
.flags
|= RXON_FLG_SHORT_PREAMBLE_MSK
;
62 ctx
->staging
.channel
=
63 cpu_to_le16(priv
->hw
->conf
.chandef
.chan
->hw_value
);
64 priv
->band
= priv
->hw
->conf
.chandef
.chan
->band
;
66 iwl_set_flags_for_band(priv
, ctx
, priv
->band
, ctx
->vif
);
68 /* clear both MIX and PURE40 mode flag */
69 ctx
->staging
.flags
&= ~(RXON_FLG_CHANNEL_MODE_MIXED
|
70 RXON_FLG_CHANNEL_MODE_PURE_40
);
72 memcpy(ctx
->staging
.node_addr
, ctx
->vif
->addr
, ETH_ALEN
);
74 ctx
->staging
.ofdm_ht_single_stream_basic_rates
= 0xff;
75 ctx
->staging
.ofdm_ht_dual_stream_basic_rates
= 0xff;
76 ctx
->staging
.ofdm_ht_triple_stream_basic_rates
= 0xff;
79 static int iwlagn_disable_bss(struct iwl_priv
*priv
,
80 struct iwl_rxon_context
*ctx
,
81 struct iwl_rxon_cmd
*send
)
83 __le32 old_filter
= send
->filter_flags
;
86 send
->filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
87 ret
= iwl_dvm_send_cmd_pdu(priv
, ctx
->rxon_cmd
,
88 0, sizeof(*send
), send
);
90 send
->filter_flags
= old_filter
;
93 IWL_DEBUG_QUIET_RFKILL(priv
,
94 "Error clearing ASSOC_MSK on BSS (%d)\n", ret
);
99 static int iwlagn_disable_pan(struct iwl_priv
*priv
,
100 struct iwl_rxon_context
*ctx
,
101 struct iwl_rxon_cmd
*send
)
103 struct iwl_notification_wait disable_wait
;
104 __le32 old_filter
= send
->filter_flags
;
105 u8 old_dev_type
= send
->dev_type
;
107 static const u16 deactivate_cmd
[] = {
108 REPLY_WIPAN_DEACTIVATION_COMPLETE
111 iwl_init_notification_wait(&priv
->notif_wait
, &disable_wait
,
112 deactivate_cmd
, ARRAY_SIZE(deactivate_cmd
),
115 send
->filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
116 send
->dev_type
= RXON_DEV_TYPE_P2P
;
117 ret
= iwl_dvm_send_cmd_pdu(priv
, ctx
->rxon_cmd
,
118 0, sizeof(*send
), send
);
120 send
->filter_flags
= old_filter
;
121 send
->dev_type
= old_dev_type
;
124 IWL_ERR(priv
, "Error disabling PAN (%d)\n", ret
);
125 iwl_remove_notification(&priv
->notif_wait
, &disable_wait
);
127 ret
= iwl_wait_notification(&priv
->notif_wait
,
130 IWL_ERR(priv
, "Timed out waiting for PAN disable\n");
136 static int iwlagn_disconn_pan(struct iwl_priv
*priv
,
137 struct iwl_rxon_context
*ctx
,
138 struct iwl_rxon_cmd
*send
)
140 __le32 old_filter
= send
->filter_flags
;
143 send
->filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
144 ret
= iwl_dvm_send_cmd_pdu(priv
, ctx
->rxon_cmd
, 0,
145 sizeof(*send
), send
);
147 send
->filter_flags
= old_filter
;
152 static void iwlagn_update_qos(struct iwl_priv
*priv
,
153 struct iwl_rxon_context
*ctx
)
160 ctx
->qos_data
.def_qos_parm
.qos_flags
= 0;
162 if (ctx
->qos_data
.qos_active
)
163 ctx
->qos_data
.def_qos_parm
.qos_flags
|=
164 QOS_PARAM_FLG_UPDATE_EDCA_MSK
;
167 ctx
->qos_data
.def_qos_parm
.qos_flags
|= QOS_PARAM_FLG_TGN_MSK
;
169 IWL_DEBUG_INFO(priv
, "send QoS cmd with Qos active=%d FLAGS=0x%X\n",
170 ctx
->qos_data
.qos_active
,
171 ctx
->qos_data
.def_qos_parm
.qos_flags
);
173 ret
= iwl_dvm_send_cmd_pdu(priv
, ctx
->qos_cmd
, 0,
174 sizeof(struct iwl_qosparam_cmd
),
175 &ctx
->qos_data
.def_qos_parm
);
177 IWL_DEBUG_QUIET_RFKILL(priv
, "Failed to update QoS\n");
180 static int iwlagn_update_beacon(struct iwl_priv
*priv
,
181 struct ieee80211_vif
*vif
)
183 lockdep_assert_held(&priv
->mutex
);
185 dev_kfree_skb(priv
->beacon_skb
);
186 priv
->beacon_skb
= ieee80211_beacon_get(priv
->hw
, vif
, 0);
187 if (!priv
->beacon_skb
)
189 return iwlagn_send_beacon_cmd(priv
);
192 static int iwlagn_send_rxon_assoc(struct iwl_priv
*priv
,
193 struct iwl_rxon_context
*ctx
)
196 struct iwl_rxon_assoc_cmd rxon_assoc
;
197 const struct iwl_rxon_cmd
*rxon1
= &ctx
->staging
;
198 const struct iwl_rxon_cmd
*rxon2
= &ctx
->active
;
200 if ((rxon1
->flags
== rxon2
->flags
) &&
201 (rxon1
->filter_flags
== rxon2
->filter_flags
) &&
202 (rxon1
->cck_basic_rates
== rxon2
->cck_basic_rates
) &&
203 (rxon1
->ofdm_ht_single_stream_basic_rates
==
204 rxon2
->ofdm_ht_single_stream_basic_rates
) &&
205 (rxon1
->ofdm_ht_dual_stream_basic_rates
==
206 rxon2
->ofdm_ht_dual_stream_basic_rates
) &&
207 (rxon1
->ofdm_ht_triple_stream_basic_rates
==
208 rxon2
->ofdm_ht_triple_stream_basic_rates
) &&
209 (rxon1
->acquisition_data
== rxon2
->acquisition_data
) &&
210 (rxon1
->rx_chain
== rxon2
->rx_chain
) &&
211 (rxon1
->ofdm_basic_rates
== rxon2
->ofdm_basic_rates
)) {
212 IWL_DEBUG_INFO(priv
, "Using current RXON_ASSOC. Not resending.\n");
216 rxon_assoc
.flags
= ctx
->staging
.flags
;
217 rxon_assoc
.filter_flags
= ctx
->staging
.filter_flags
;
218 rxon_assoc
.ofdm_basic_rates
= ctx
->staging
.ofdm_basic_rates
;
219 rxon_assoc
.cck_basic_rates
= ctx
->staging
.cck_basic_rates
;
220 rxon_assoc
.reserved1
= 0;
221 rxon_assoc
.reserved2
= 0;
222 rxon_assoc
.reserved3
= 0;
223 rxon_assoc
.ofdm_ht_single_stream_basic_rates
=
224 ctx
->staging
.ofdm_ht_single_stream_basic_rates
;
225 rxon_assoc
.ofdm_ht_dual_stream_basic_rates
=
226 ctx
->staging
.ofdm_ht_dual_stream_basic_rates
;
227 rxon_assoc
.rx_chain_select_flags
= ctx
->staging
.rx_chain
;
228 rxon_assoc
.ofdm_ht_triple_stream_basic_rates
=
229 ctx
->staging
.ofdm_ht_triple_stream_basic_rates
;
230 rxon_assoc
.acquisition_data
= ctx
->staging
.acquisition_data
;
232 ret
= iwl_dvm_send_cmd_pdu(priv
, ctx
->rxon_assoc_cmd
,
233 CMD_ASYNC
, sizeof(rxon_assoc
), &rxon_assoc
);
237 static u16
iwl_adjust_beacon_interval(u16 beacon_val
, u16 max_beacon_val
)
243 * If mac80211 hasn't given us a beacon interval, program
244 * the default into the device (not checking this here
245 * would cause the adjustment below to return the maximum
246 * value, which may break PAN.)
249 return DEFAULT_BEACON_INTERVAL
;
252 * If the beacon interval we obtained from the peer
253 * is too large, we'll have to wake up more often
254 * (and in IBSS case, we'll beacon too much)
256 * For example, if max_beacon_val is 4096, and the
257 * requested beacon interval is 7000, we'll have to
258 * use 3500 to be able to wake up on the beacons.
260 * This could badly influence beacon detection stats.
263 beacon_factor
= (beacon_val
+ max_beacon_val
) / max_beacon_val
;
264 new_val
= beacon_val
/ beacon_factor
;
267 new_val
= max_beacon_val
;
272 static int iwl_send_rxon_timing(struct iwl_priv
*priv
,
273 struct iwl_rxon_context
*ctx
)
276 s32 interval_tm
, rem
;
277 struct ieee80211_conf
*conf
= NULL
;
279 struct ieee80211_vif
*vif
= ctx
->vif
;
281 conf
= &priv
->hw
->conf
;
283 lockdep_assert_held(&priv
->mutex
);
285 memset(&ctx
->timing
, 0, sizeof(struct iwl_rxon_time_cmd
));
287 ctx
->timing
.timestamp
= cpu_to_le64(priv
->timestamp
);
288 ctx
->timing
.listen_interval
= cpu_to_le16(conf
->listen_interval
);
290 beacon_int
= vif
? vif
->bss_conf
.beacon_int
: 0;
293 * TODO: For IBSS we need to get atim_window from mac80211,
294 * for now just always use 0
296 ctx
->timing
.atim_window
= 0;
298 if (ctx
->ctxid
== IWL_RXON_CTX_PAN
&&
299 (!ctx
->vif
|| ctx
->vif
->type
!= NL80211_IFTYPE_STATION
) &&
300 iwl_is_associated(priv
, IWL_RXON_CTX_BSS
) &&
301 priv
->contexts
[IWL_RXON_CTX_BSS
].vif
&&
302 priv
->contexts
[IWL_RXON_CTX_BSS
].vif
->bss_conf
.beacon_int
) {
303 ctx
->timing
.beacon_interval
=
304 priv
->contexts
[IWL_RXON_CTX_BSS
].timing
.beacon_interval
;
305 beacon_int
= le16_to_cpu(ctx
->timing
.beacon_interval
);
306 } else if (ctx
->ctxid
== IWL_RXON_CTX_BSS
&&
307 iwl_is_associated(priv
, IWL_RXON_CTX_PAN
) &&
308 priv
->contexts
[IWL_RXON_CTX_PAN
].vif
&&
309 priv
->contexts
[IWL_RXON_CTX_PAN
].vif
->bss_conf
.beacon_int
&&
310 (!iwl_is_associated_ctx(ctx
) || !ctx
->vif
||
311 !ctx
->vif
->bss_conf
.beacon_int
)) {
312 ctx
->timing
.beacon_interval
=
313 priv
->contexts
[IWL_RXON_CTX_PAN
].timing
.beacon_interval
;
314 beacon_int
= le16_to_cpu(ctx
->timing
.beacon_interval
);
316 beacon_int
= iwl_adjust_beacon_interval(beacon_int
,
317 IWL_MAX_UCODE_BEACON_INTERVAL
* TIME_UNIT
);
318 ctx
->timing
.beacon_interval
= cpu_to_le16(beacon_int
);
321 ctx
->beacon_int
= beacon_int
;
323 tsf
= priv
->timestamp
; /* tsf is modifed by do_div: copy it */
324 interval_tm
= beacon_int
* TIME_UNIT
;
325 rem
= do_div(tsf
, interval_tm
);
326 ctx
->timing
.beacon_init_val
= cpu_to_le32(interval_tm
- rem
);
328 ctx
->timing
.dtim_period
= vif
? (vif
->bss_conf
.dtim_period
?: 1) : 1;
330 IWL_DEBUG_ASSOC(priv
,
331 "beacon interval %d beacon timer %d beacon tim %d\n",
332 le16_to_cpu(ctx
->timing
.beacon_interval
),
333 le32_to_cpu(ctx
->timing
.beacon_init_val
),
334 le16_to_cpu(ctx
->timing
.atim_window
));
336 return iwl_dvm_send_cmd_pdu(priv
, ctx
->rxon_timing_cmd
,
337 0, sizeof(ctx
->timing
), &ctx
->timing
);
340 static int iwlagn_rxon_disconn(struct iwl_priv
*priv
,
341 struct iwl_rxon_context
*ctx
)
344 struct iwl_rxon_cmd
*active
= (void *)&ctx
->active
;
346 if (ctx
->ctxid
== IWL_RXON_CTX_BSS
) {
347 ret
= iwlagn_disable_bss(priv
, ctx
, &ctx
->staging
);
349 ret
= iwlagn_disable_pan(priv
, ctx
, &ctx
->staging
);
353 ret
= iwl_send_rxon_timing(priv
, ctx
);
355 IWL_ERR(priv
, "Failed to send timing (%d)!\n", ret
);
358 ret
= iwlagn_disconn_pan(priv
, ctx
, &ctx
->staging
);
365 * Un-assoc RXON clears the station table and WEP
366 * keys, so we have to restore those afterwards.
368 iwl_clear_ucode_stations(priv
, ctx
);
369 /* update -- might need P2P now */
370 iwl_update_bcast_station(priv
, ctx
);
371 iwl_restore_stations(priv
, ctx
);
372 ret
= iwl_restore_default_wep_keys(priv
, ctx
);
374 IWL_ERR(priv
, "Failed to restore WEP keys (%d)\n", ret
);
378 memcpy(active
, &ctx
->staging
, sizeof(*active
));
382 static int iwl_set_tx_power(struct iwl_priv
*priv
, s8 tx_power
, bool force
)
387 struct iwl_rxon_context
*ctx
= &priv
->contexts
[IWL_RXON_CTX_BSS
];
389 if (priv
->calib_disabled
& IWL_TX_POWER_CALIB_DISABLED
)
392 lockdep_assert_held(&priv
->mutex
);
394 if (priv
->tx_power_user_lmt
== tx_power
&& !force
)
397 if (tx_power
< IWLAGN_TX_POWER_TARGET_POWER_MIN
) {
399 "Requested user TXPOWER %d below lower limit %d.\n",
401 IWLAGN_TX_POWER_TARGET_POWER_MIN
);
405 if (tx_power
> DIV_ROUND_UP(priv
->nvm_data
->max_tx_pwr_half_dbm
, 2)) {
407 "Requested user TXPOWER %d above upper limit %d.\n",
408 tx_power
, priv
->nvm_data
->max_tx_pwr_half_dbm
);
412 if (!iwl_is_ready_rf(priv
))
415 /* scan complete and commit_rxon use tx_power_next value,
416 * it always need to be updated for newest request */
417 priv
->tx_power_next
= tx_power
;
419 /* do not set tx power when scanning or channel changing */
420 defer
= test_bit(STATUS_SCANNING
, &priv
->status
) ||
421 memcmp(&ctx
->active
, &ctx
->staging
, sizeof(ctx
->staging
));
422 if (defer
&& !force
) {
423 IWL_DEBUG_INFO(priv
, "Deferring tx power set\n");
427 prev_tx_power
= priv
->tx_power_user_lmt
;
428 priv
->tx_power_user_lmt
= tx_power
;
430 ret
= iwlagn_send_tx_power(priv
);
432 /* if fail to set tx_power, restore the orig. tx power */
434 priv
->tx_power_user_lmt
= prev_tx_power
;
435 priv
->tx_power_next
= prev_tx_power
;
440 static int iwlagn_rxon_connect(struct iwl_priv
*priv
,
441 struct iwl_rxon_context
*ctx
)
444 struct iwl_rxon_cmd
*active
= (void *)&ctx
->active
;
446 /* RXON timing must be before associated RXON */
447 if (ctx
->ctxid
== IWL_RXON_CTX_BSS
) {
448 ret
= iwl_send_rxon_timing(priv
, ctx
);
450 IWL_ERR(priv
, "Failed to send timing (%d)!\n", ret
);
454 /* QoS info may be cleared by previous un-assoc RXON */
455 iwlagn_update_qos(priv
, ctx
);
458 * We'll run into this code path when beaconing is
459 * enabled, but then we also need to send the beacon
462 if (ctx
->vif
&& (ctx
->vif
->type
== NL80211_IFTYPE_AP
)) {
463 ret
= iwlagn_update_beacon(priv
, ctx
->vif
);
466 "Error sending required beacon (%d)!\n",
472 priv
->start_calib
= 0;
474 * Apply the new configuration.
476 * Associated RXON doesn't clear the station table in uCode,
477 * so we don't need to restore stations etc. after this.
479 ret
= iwl_dvm_send_cmd_pdu(priv
, ctx
->rxon_cmd
, 0,
480 sizeof(struct iwl_rxon_cmd
), &ctx
->staging
);
482 IWL_ERR(priv
, "Error setting new RXON (%d)\n", ret
);
485 memcpy(active
, &ctx
->staging
, sizeof(*active
));
487 /* IBSS beacon needs to be sent after setting assoc */
488 if (ctx
->vif
&& (ctx
->vif
->type
== NL80211_IFTYPE_ADHOC
))
489 if (iwlagn_update_beacon(priv
, ctx
->vif
))
490 IWL_ERR(priv
, "Error sending IBSS beacon\n");
491 iwl_init_sensitivity(priv
);
494 * If we issue a new RXON command which required a tune then
495 * we must send a new TXPOWER command or we won't be able to
498 * It's expected we set power here if channel is changing.
500 ret
= iwl_set_tx_power(priv
, priv
->tx_power_next
, true);
502 IWL_ERR(priv
, "Error sending TX power (%d)\n", ret
);
509 int iwlagn_set_pan_params(struct iwl_priv
*priv
)
511 struct iwl_wipan_params_cmd cmd
;
512 struct iwl_rxon_context
*ctx_bss
, *ctx_pan
;
513 int slot0
= 300, slot1
= 0;
516 if (priv
->valid_contexts
== BIT(IWL_RXON_CTX_BSS
))
519 BUILD_BUG_ON(NUM_IWL_RXON_CTX
!= 2);
521 lockdep_assert_held(&priv
->mutex
);
523 ctx_bss
= &priv
->contexts
[IWL_RXON_CTX_BSS
];
524 ctx_pan
= &priv
->contexts
[IWL_RXON_CTX_PAN
];
527 * If the PAN context is inactive, then we don't need
528 * to update the PAN parameters, the last thing we'll
529 * have done before it goes inactive is making the PAN
530 * parameters be WLAN-only.
532 if (!ctx_pan
->is_active
)
535 memset(&cmd
, 0, sizeof(cmd
));
537 /* only 2 slots are currently allowed */
540 cmd
.slots
[0].type
= 0; /* BSS */
541 cmd
.slots
[1].type
= 1; /* PAN */
543 if (ctx_bss
->vif
&& ctx_pan
->vif
) {
544 int bcnint
= ctx_pan
->beacon_int
;
545 int dtim
= ctx_pan
->vif
->bss_conf
.dtim_period
?: 1;
547 /* should be set, but seems unused?? */
548 cmd
.flags
|= cpu_to_le16(IWL_WIPAN_PARAMS_FLG_SLOTTED_MODE
);
550 if (ctx_pan
->vif
->type
== NL80211_IFTYPE_AP
&&
552 bcnint
!= ctx_bss
->beacon_int
) {
554 "beacon intervals don't match (%d, %d)\n",
555 ctx_bss
->beacon_int
, ctx_pan
->beacon_int
);
557 bcnint
= max_t(int, bcnint
,
558 ctx_bss
->beacon_int
);
560 bcnint
= DEFAULT_BEACON_INTERVAL
;
562 slot1
= bcnint
- slot0
;
564 if (test_bit(STATUS_SCAN_HW
, &priv
->status
) ||
565 (!ctx_bss
->vif
->cfg
.idle
&&
566 !ctx_bss
->vif
->cfg
.assoc
)) {
567 slot0
= dtim
* bcnint
* 3 - IWL_MIN_SLOT_TIME
;
568 slot1
= IWL_MIN_SLOT_TIME
;
569 } else if (!ctx_pan
->vif
->cfg
.idle
&&
570 !ctx_pan
->vif
->cfg
.assoc
) {
571 slot1
= dtim
* bcnint
* 3 - IWL_MIN_SLOT_TIME
;
572 slot0
= IWL_MIN_SLOT_TIME
;
574 } else if (ctx_pan
->vif
) {
576 slot1
= max_t(int, 1, ctx_pan
->vif
->bss_conf
.dtim_period
) *
578 slot1
= max_t(int, DEFAULT_BEACON_INTERVAL
, slot1
);
580 if (test_bit(STATUS_SCAN_HW
, &priv
->status
)) {
581 slot0
= slot1
* 3 - IWL_MIN_SLOT_TIME
;
582 slot1
= IWL_MIN_SLOT_TIME
;
586 cmd
.slots
[0].width
= cpu_to_le16(slot0
);
587 cmd
.slots
[1].width
= cpu_to_le16(slot1
);
589 ret
= iwl_dvm_send_cmd_pdu(priv
, REPLY_WIPAN_PARAMS
, 0,
592 IWL_ERR(priv
, "Error setting PAN parameters (%d)\n", ret
);
597 static void _iwl_set_rxon_ht(struct iwl_priv
*priv
,
598 struct iwl_ht_config
*ht_conf
,
599 struct iwl_rxon_context
*ctx
)
601 struct iwl_rxon_cmd
*rxon
= &ctx
->staging
;
603 if (!ctx
->ht
.enabled
) {
604 rxon
->flags
&= ~(RXON_FLG_CHANNEL_MODE_MSK
|
605 RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK
|
606 RXON_FLG_HT40_PROT_MSK
|
607 RXON_FLG_HT_PROT_MSK
);
611 /* FIXME: if the definition of ht.protection changed, the "translation"
612 * will be needed for rxon->flags
614 rxon
->flags
|= cpu_to_le32(ctx
->ht
.protection
<<
615 RXON_FLG_HT_OPERATING_MODE_POS
);
617 /* Set up channel bandwidth:
618 * 20 MHz only, 20/40 mixed or pure 40 if ht40 ok */
619 /* clear the HT channel mode before set the mode */
620 rxon
->flags
&= ~(RXON_FLG_CHANNEL_MODE_MSK
|
621 RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK
);
622 if (iwl_is_ht40_tx_allowed(priv
, ctx
, NULL
)) {
624 if (ctx
->ht
.protection
==
625 IEEE80211_HT_OP_MODE_PROTECTION_20MHZ
) {
626 rxon
->flags
|= RXON_FLG_CHANNEL_MODE_PURE_40
;
628 * Note: control channel is opposite of extension
631 switch (ctx
->ht
.extension_chan_offset
) {
632 case IEEE80211_HT_PARAM_CHA_SEC_ABOVE
:
634 ~RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK
;
636 case IEEE80211_HT_PARAM_CHA_SEC_BELOW
:
638 RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK
;
643 * Note: control channel is opposite of extension
646 switch (ctx
->ht
.extension_chan_offset
) {
647 case IEEE80211_HT_PARAM_CHA_SEC_ABOVE
:
649 ~(RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK
);
650 rxon
->flags
|= RXON_FLG_CHANNEL_MODE_MIXED
;
652 case IEEE80211_HT_PARAM_CHA_SEC_BELOW
:
653 rxon
->flags
|= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK
;
654 rxon
->flags
|= RXON_FLG_CHANNEL_MODE_MIXED
;
656 case IEEE80211_HT_PARAM_CHA_SEC_NONE
:
659 * channel location only valid if in Mixed
663 "invalid extension channel offset\n");
668 rxon
->flags
|= RXON_FLG_CHANNEL_MODE_LEGACY
;
671 iwlagn_set_rxon_chain(priv
, ctx
);
673 IWL_DEBUG_ASSOC(priv
, "rxon flags 0x%X operation mode :0x%X "
674 "extension channel offset 0x%x\n",
675 le32_to_cpu(rxon
->flags
), ctx
->ht
.protection
,
676 ctx
->ht
.extension_chan_offset
);
679 void iwl_set_rxon_ht(struct iwl_priv
*priv
, struct iwl_ht_config
*ht_conf
)
681 struct iwl_rxon_context
*ctx
;
683 for_each_context(priv
, ctx
)
684 _iwl_set_rxon_ht(priv
, ht_conf
, ctx
);
688 * iwl_set_rxon_channel - Set the band and channel values in staging RXON
689 * @ch: requested channel as a pointer to struct ieee80211_channel
691 * NOTE: Does not commit to the hardware; it sets appropriate bit fields
692 * in the staging RXON flag structure based on the ch->band
694 void iwl_set_rxon_channel(struct iwl_priv
*priv
, struct ieee80211_channel
*ch
,
695 struct iwl_rxon_context
*ctx
)
697 enum nl80211_band band
= ch
->band
;
698 u16 channel
= ch
->hw_value
;
700 if ((le16_to_cpu(ctx
->staging
.channel
) == channel
) &&
701 (priv
->band
== band
))
704 ctx
->staging
.channel
= cpu_to_le16(channel
);
705 if (band
== NL80211_BAND_5GHZ
)
706 ctx
->staging
.flags
&= ~RXON_FLG_BAND_24G_MSK
;
708 ctx
->staging
.flags
|= RXON_FLG_BAND_24G_MSK
;
712 IWL_DEBUG_INFO(priv
, "Staging channel set to %d [%d]\n", channel
, band
);
716 void iwl_set_flags_for_band(struct iwl_priv
*priv
,
717 struct iwl_rxon_context
*ctx
,
718 enum nl80211_band band
,
719 struct ieee80211_vif
*vif
)
721 if (band
== NL80211_BAND_5GHZ
) {
722 ctx
->staging
.flags
&=
723 ~(RXON_FLG_BAND_24G_MSK
| RXON_FLG_AUTO_DETECT_MSK
725 ctx
->staging
.flags
|= RXON_FLG_SHORT_SLOT_MSK
;
727 /* Copied from iwl_post_associate() */
728 if (vif
&& vif
->bss_conf
.use_short_slot
)
729 ctx
->staging
.flags
|= RXON_FLG_SHORT_SLOT_MSK
;
731 ctx
->staging
.flags
&= ~RXON_FLG_SHORT_SLOT_MSK
;
733 ctx
->staging
.flags
|= RXON_FLG_BAND_24G_MSK
;
734 ctx
->staging
.flags
|= RXON_FLG_AUTO_DETECT_MSK
;
735 ctx
->staging
.flags
&= ~RXON_FLG_CCK_MSK
;
739 static void iwl_set_rxon_hwcrypto(struct iwl_priv
*priv
,
740 struct iwl_rxon_context
*ctx
, int hw_decrypt
)
742 struct iwl_rxon_cmd
*rxon
= &ctx
->staging
;
745 rxon
->filter_flags
&= ~RXON_FILTER_DIS_DECRYPT_MSK
;
747 rxon
->filter_flags
|= RXON_FILTER_DIS_DECRYPT_MSK
;
751 /* validate RXON structure is valid */
752 static int iwl_check_rxon_cmd(struct iwl_priv
*priv
,
753 struct iwl_rxon_context
*ctx
)
755 struct iwl_rxon_cmd
*rxon
= &ctx
->staging
;
758 if (rxon
->flags
& RXON_FLG_BAND_24G_MSK
) {
759 if (rxon
->flags
& RXON_FLG_TGJ_NARROW_BAND_MSK
) {
760 IWL_WARN(priv
, "check 2.4G: wrong narrow\n");
763 if (rxon
->flags
& RXON_FLG_RADAR_DETECT_MSK
) {
764 IWL_WARN(priv
, "check 2.4G: wrong radar\n");
768 if (!(rxon
->flags
& RXON_FLG_SHORT_SLOT_MSK
)) {
769 IWL_WARN(priv
, "check 5.2G: not short slot!\n");
772 if (rxon
->flags
& RXON_FLG_CCK_MSK
) {
773 IWL_WARN(priv
, "check 5.2G: CCK!\n");
777 if ((rxon
->node_addr
[0] | rxon
->bssid_addr
[0]) & 0x1) {
778 IWL_WARN(priv
, "mac/bssid mcast!\n");
782 /* make sure basic rates 6Mbps and 1Mbps are supported */
783 if ((rxon
->ofdm_basic_rates
& IWL_RATE_6M_MASK
) == 0 &&
784 (rxon
->cck_basic_rates
& IWL_RATE_1M_MASK
) == 0) {
785 IWL_WARN(priv
, "neither 1 nor 6 are basic\n");
789 if (le16_to_cpu(rxon
->assoc_id
) > 2007) {
790 IWL_WARN(priv
, "aid > 2007\n");
794 if ((rxon
->flags
& (RXON_FLG_CCK_MSK
| RXON_FLG_SHORT_SLOT_MSK
))
795 == (RXON_FLG_CCK_MSK
| RXON_FLG_SHORT_SLOT_MSK
)) {
796 IWL_WARN(priv
, "CCK and short slot\n");
800 if ((rxon
->flags
& (RXON_FLG_CCK_MSK
| RXON_FLG_AUTO_DETECT_MSK
))
801 == (RXON_FLG_CCK_MSK
| RXON_FLG_AUTO_DETECT_MSK
)) {
802 IWL_WARN(priv
, "CCK and auto detect\n");
806 if ((rxon
->flags
& (RXON_FLG_AUTO_DETECT_MSK
|
807 RXON_FLG_TGG_PROTECT_MSK
)) ==
808 RXON_FLG_TGG_PROTECT_MSK
) {
809 IWL_WARN(priv
, "TGg but no auto-detect\n");
813 if (rxon
->channel
== 0) {
814 IWL_WARN(priv
, "zero channel is invalid\n");
818 WARN(errors
, "Invalid RXON (%#x), channel %d",
819 errors
, le16_to_cpu(rxon
->channel
));
821 return errors
? -EINVAL
: 0;
825 * iwl_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed
826 * @priv: staging_rxon is compared to active_rxon
828 * If the RXON structure is changing enough to require a new tune,
829 * or is clearing the RXON_FILTER_ASSOC_MSK, then return 1 to indicate that
830 * a new tune (full RXON command, rather than RXON_ASSOC cmd) is required.
832 static int iwl_full_rxon_required(struct iwl_priv
*priv
,
833 struct iwl_rxon_context
*ctx
)
835 const struct iwl_rxon_cmd
*staging
= &ctx
->staging
;
836 const struct iwl_rxon_cmd
*active
= &ctx
->active
;
840 IWL_DEBUG_INFO(priv, "need full RXON - " #cond "\n"); \
844 #define CHK_NEQ(c1, c2) \
845 if ((c1) != (c2)) { \
846 IWL_DEBUG_INFO(priv, "need full RXON - " \
847 #c1 " != " #c2 " - %d != %d\n", \
852 /* These items are only settable from the full RXON command */
853 CHK(!iwl_is_associated_ctx(ctx
));
854 CHK(!ether_addr_equal(staging
->bssid_addr
, active
->bssid_addr
));
855 CHK(!ether_addr_equal(staging
->node_addr
, active
->node_addr
));
856 CHK(!ether_addr_equal(staging
->wlap_bssid_addr
,
857 active
->wlap_bssid_addr
));
858 CHK_NEQ(staging
->dev_type
, active
->dev_type
);
859 CHK_NEQ(staging
->channel
, active
->channel
);
860 CHK_NEQ(staging
->air_propagation
, active
->air_propagation
);
861 CHK_NEQ(staging
->ofdm_ht_single_stream_basic_rates
,
862 active
->ofdm_ht_single_stream_basic_rates
);
863 CHK_NEQ(staging
->ofdm_ht_dual_stream_basic_rates
,
864 active
->ofdm_ht_dual_stream_basic_rates
);
865 CHK_NEQ(staging
->ofdm_ht_triple_stream_basic_rates
,
866 active
->ofdm_ht_triple_stream_basic_rates
);
867 CHK_NEQ(staging
->assoc_id
, active
->assoc_id
);
869 /* flags, filter_flags, ofdm_basic_rates, and cck_basic_rates can
870 * be updated with the RXON_ASSOC command -- however only some
871 * flag transitions are allowed using RXON_ASSOC */
873 /* Check if we are not switching bands */
874 CHK_NEQ(staging
->flags
& RXON_FLG_BAND_24G_MSK
,
875 active
->flags
& RXON_FLG_BAND_24G_MSK
);
877 /* Check if we are switching association toggle */
878 CHK_NEQ(staging
->filter_flags
& RXON_FILTER_ASSOC_MSK
,
879 active
->filter_flags
& RXON_FILTER_ASSOC_MSK
);
887 #ifdef CONFIG_IWLWIFI_DEBUG
888 void iwl_print_rx_config_cmd(struct iwl_priv
*priv
,
889 enum iwl_rxon_context_id ctxid
)
891 struct iwl_rxon_context
*ctx
= &priv
->contexts
[ctxid
];
892 struct iwl_rxon_cmd
*rxon
= &ctx
->staging
;
894 IWL_DEBUG_RADIO(priv
, "RX CONFIG:\n");
895 iwl_print_hex_dump(priv
, IWL_DL_RADIO
, (u8
*) rxon
, sizeof(*rxon
));
896 IWL_DEBUG_RADIO(priv
, "u16 channel: 0x%x\n",
897 le16_to_cpu(rxon
->channel
));
898 IWL_DEBUG_RADIO(priv
, "u32 flags: 0x%08X\n",
899 le32_to_cpu(rxon
->flags
));
900 IWL_DEBUG_RADIO(priv
, "u32 filter_flags: 0x%08x\n",
901 le32_to_cpu(rxon
->filter_flags
));
902 IWL_DEBUG_RADIO(priv
, "u8 dev_type: 0x%x\n", rxon
->dev_type
);
903 IWL_DEBUG_RADIO(priv
, "u8 ofdm_basic_rates: 0x%02x\n",
904 rxon
->ofdm_basic_rates
);
905 IWL_DEBUG_RADIO(priv
, "u8 cck_basic_rates: 0x%02x\n",
906 rxon
->cck_basic_rates
);
907 IWL_DEBUG_RADIO(priv
, "u8[6] node_addr: %pM\n", rxon
->node_addr
);
908 IWL_DEBUG_RADIO(priv
, "u8[6] bssid_addr: %pM\n", rxon
->bssid_addr
);
909 IWL_DEBUG_RADIO(priv
, "u16 assoc_id: 0x%x\n",
910 le16_to_cpu(rxon
->assoc_id
));
914 static void iwl_calc_basic_rates(struct iwl_priv
*priv
,
915 struct iwl_rxon_context
*ctx
)
917 int lowest_present_ofdm
= 100;
918 int lowest_present_cck
= 100;
923 struct ieee80211_supported_band
*sband
;
924 unsigned long basic
= ctx
->vif
->bss_conf
.basic_rates
;
927 sband
= priv
->hw
->wiphy
->bands
[priv
->hw
->conf
.chandef
.chan
->band
];
929 for_each_set_bit(i
, &basic
, BITS_PER_LONG
) {
930 int hw
= sband
->bitrates
[i
].hw_value
;
931 if (hw
>= IWL_FIRST_OFDM_RATE
) {
932 ofdm
|= BIT(hw
- IWL_FIRST_OFDM_RATE
);
933 if (lowest_present_ofdm
> hw
)
934 lowest_present_ofdm
= hw
;
936 BUILD_BUG_ON(IWL_FIRST_CCK_RATE
!= 0);
939 if (lowest_present_cck
> hw
)
940 lowest_present_cck
= hw
;
946 * Now we've got the basic rates as bitmaps in the ofdm and cck
947 * variables. This isn't sufficient though, as there might not
948 * be all the right rates in the bitmap. E.g. if the only basic
949 * rates are 5.5 Mbps and 11 Mbps, we still need to add 1 Mbps
950 * and 6 Mbps because the 802.11-2007 standard says in 9.6:
952 * [...] a STA responding to a received frame shall transmit
953 * its Control Response frame [...] at the highest rate in the
954 * BSSBasicRateSet parameter that is less than or equal to the
955 * rate of the immediately previous frame in the frame exchange
956 * sequence ([...]) and that is of the same modulation class
957 * ([...]) as the received frame. If no rate contained in the
958 * BSSBasicRateSet parameter meets these conditions, then the
959 * control frame sent in response to a received frame shall be
960 * transmitted at the highest mandatory rate of the PHY that is
961 * less than or equal to the rate of the received frame, and
962 * that is of the same modulation class as the received frame.
964 * As a consequence, we need to add all mandatory rates that are
965 * lower than all of the basic rates to these bitmaps.
968 if (IWL_RATE_24M_INDEX
< lowest_present_ofdm
)
969 ofdm
|= IWL_RATE_24M_MASK
>> IWL_FIRST_OFDM_RATE
;
970 if (IWL_RATE_12M_INDEX
< lowest_present_ofdm
)
971 ofdm
|= IWL_RATE_12M_MASK
>> IWL_FIRST_OFDM_RATE
;
972 /* 6M already there or needed so always add */
973 ofdm
|= IWL_RATE_6M_MASK
>> IWL_FIRST_OFDM_RATE
;
976 * CCK is a bit more complex with DSSS vs. HR/DSSS vs. ERP.
978 * - if no CCK rates are basic, it must be ERP since there must
979 * be some basic rates at all, so they're OFDM => ERP PHY
980 * (or we're in 5 GHz, and the cck bitmap will never be used)
981 * - if 11M is a basic rate, it must be ERP as well, so add 5.5M
982 * - if 5.5M is basic, 1M and 2M are mandatory
983 * - if 2M is basic, 1M is mandatory
984 * - if 1M is basic, that's the only valid ACK rate.
985 * As a consequence, it's not as complicated as it sounds, just add
986 * any lower rates to the ACK rate bitmap.
988 if (IWL_RATE_11M_INDEX
< lowest_present_cck
)
989 cck
|= IWL_RATE_11M_MASK
>> IWL_FIRST_CCK_RATE
;
990 if (IWL_RATE_5M_INDEX
< lowest_present_cck
)
991 cck
|= IWL_RATE_5M_MASK
>> IWL_FIRST_CCK_RATE
;
992 if (IWL_RATE_2M_INDEX
< lowest_present_cck
)
993 cck
|= IWL_RATE_2M_MASK
>> IWL_FIRST_CCK_RATE
;
994 /* 1M already there or needed so always add */
995 cck
|= IWL_RATE_1M_MASK
>> IWL_FIRST_CCK_RATE
;
997 IWL_DEBUG_RATE(priv
, "Set basic rates cck:0x%.2x ofdm:0x%.2x\n",
1000 /* "basic_rates" is a misnomer here -- should be called ACK rates */
1001 ctx
->staging
.cck_basic_rates
= cck
;
1002 ctx
->staging
.ofdm_basic_rates
= ofdm
;
1006 * iwlagn_commit_rxon - commit staging_rxon to hardware
1008 * The RXON command in staging_rxon is committed to the hardware and
1009 * the active_rxon structure is updated with the new data. This
1010 * function correctly transitions out of the RXON_ASSOC_MSK state if
1011 * a HW tune is required based on the RXON structure changes.
1013 * The connect/disconnect flow should be as the following:
1015 * 1. make sure send RXON command with association bit unset if not connect
1016 * this should include the channel and the band for the candidate
1017 * to be connected to
1018 * 2. Add Station before RXON association with the AP
1019 * 3. RXON_timing has to send before RXON for connection
1020 * 4. full RXON command - associated bit set
1021 * 5. use RXON_ASSOC command to update any flags changes
1023 int iwlagn_commit_rxon(struct iwl_priv
*priv
, struct iwl_rxon_context
*ctx
)
1025 /* cast away the const for active_rxon in this function */
1026 struct iwl_rxon_cmd
*active
= (void *)&ctx
->active
;
1027 bool new_assoc
= !!(ctx
->staging
.filter_flags
& RXON_FILTER_ASSOC_MSK
);
1030 lockdep_assert_held(&priv
->mutex
);
1032 if (!iwl_is_alive(priv
))
1035 /* This function hardcodes a bunch of dual-mode assumptions */
1036 BUILD_BUG_ON(NUM_IWL_RXON_CTX
!= 2);
1038 if (!ctx
->is_active
)
1041 /* always get timestamp with Rx frame */
1042 ctx
->staging
.flags
|= RXON_FLG_TSF2HOST_MSK
;
1044 /* recalculate basic rates */
1045 iwl_calc_basic_rates(priv
, ctx
);
1048 * force CTS-to-self frames protection if RTS-CTS is not preferred
1049 * one aggregation protection method
1051 if (!priv
->hw_params
.use_rts_for_aggregation
)
1052 ctx
->staging
.flags
|= RXON_FLG_SELF_CTS_EN
;
1054 if ((ctx
->vif
&& ctx
->vif
->bss_conf
.use_short_slot
) ||
1055 !(ctx
->staging
.flags
& RXON_FLG_BAND_24G_MSK
))
1056 ctx
->staging
.flags
|= RXON_FLG_SHORT_SLOT_MSK
;
1058 ctx
->staging
.flags
&= ~RXON_FLG_SHORT_SLOT_MSK
;
1060 iwl_print_rx_config_cmd(priv
, ctx
->ctxid
);
1061 ret
= iwl_check_rxon_cmd(priv
, ctx
);
1063 IWL_ERR(priv
, "Invalid RXON configuration. Not committing.\n");
1068 * receive commit_rxon request
1069 * abort any previous channel switch if still in process
1071 if (test_bit(STATUS_CHANNEL_SWITCH_PENDING
, &priv
->status
) &&
1072 (priv
->switch_channel
!= ctx
->staging
.channel
)) {
1073 IWL_DEBUG_11H(priv
, "abort channel switch on %d\n",
1074 le16_to_cpu(priv
->switch_channel
));
1075 iwl_chswitch_done(priv
, false);
1079 * If we don't need to send a full RXON, we can use
1080 * iwl_rxon_assoc_cmd which is used to reconfigure filter
1081 * and other flags for the current radio configuration.
1083 if (!iwl_full_rxon_required(priv
, ctx
)) {
1084 ret
= iwlagn_send_rxon_assoc(priv
, ctx
);
1086 IWL_ERR(priv
, "Error setting RXON_ASSOC (%d)\n", ret
);
1090 memcpy(active
, &ctx
->staging
, sizeof(*active
));
1092 * We do not commit tx power settings while channel changing,
1093 * do it now if after settings changed.
1095 iwl_set_tx_power(priv
, priv
->tx_power_next
, false);
1097 /* make sure we are in the right PS state */
1098 iwl_power_update_mode(priv
, true);
1103 iwl_set_rxon_hwcrypto(priv
, ctx
, !iwlwifi_mod_params
.swcrypto
);
1105 IWL_DEBUG_INFO(priv
,
1106 "Going to commit RXON\n"
1107 " * with%s RXON_FILTER_ASSOC_MSK\n"
1110 (new_assoc
? "" : "out"),
1111 le16_to_cpu(ctx
->staging
.channel
),
1112 ctx
->staging
.bssid_addr
);
1115 * Always clear associated first, but with the correct config.
1116 * This is required as for example station addition for the
1117 * AP station must be done after the BSSID is set to correctly
1118 * set up filters in the device.
1120 ret
= iwlagn_rxon_disconn(priv
, ctx
);
1124 ret
= iwlagn_set_pan_params(priv
);
1129 return iwlagn_rxon_connect(priv
, ctx
);
1134 void iwlagn_config_ht40(struct ieee80211_conf
*conf
,
1135 struct iwl_rxon_context
*ctx
)
1137 if (conf_is_ht40_minus(conf
)) {
1138 ctx
->ht
.extension_chan_offset
=
1139 IEEE80211_HT_PARAM_CHA_SEC_BELOW
;
1140 ctx
->ht
.is_40mhz
= true;
1141 } else if (conf_is_ht40_plus(conf
)) {
1142 ctx
->ht
.extension_chan_offset
=
1143 IEEE80211_HT_PARAM_CHA_SEC_ABOVE
;
1144 ctx
->ht
.is_40mhz
= true;
1146 ctx
->ht
.extension_chan_offset
=
1147 IEEE80211_HT_PARAM_CHA_SEC_NONE
;
1148 ctx
->ht
.is_40mhz
= false;
1152 int iwlagn_mac_config(struct ieee80211_hw
*hw
, u32 changed
)
1154 struct iwl_priv
*priv
= IWL_MAC80211_GET_DVM(hw
);
1155 struct iwl_rxon_context
*ctx
;
1156 struct ieee80211_conf
*conf
= &hw
->conf
;
1157 struct ieee80211_channel
*channel
= conf
->chandef
.chan
;
1160 IWL_DEBUG_MAC80211(priv
, "enter: changed %#x\n", changed
);
1162 mutex_lock(&priv
->mutex
);
1164 if (unlikely(test_bit(STATUS_SCANNING
, &priv
->status
))) {
1165 IWL_DEBUG_MAC80211(priv
, "leave - scanning\n");
1169 if (!iwl_is_ready(priv
)) {
1170 IWL_DEBUG_MAC80211(priv
, "leave - not ready\n");
1174 if (changed
& (IEEE80211_CONF_CHANGE_SMPS
|
1175 IEEE80211_CONF_CHANGE_CHANNEL
)) {
1176 /* mac80211 uses static for non-HT which is what we want */
1177 priv
->current_ht_config
.smps
= conf
->smps_mode
;
1180 * Recalculate chain counts.
1182 * If monitor mode is enabled then mac80211 will
1183 * set up the SM PS mode to OFF if an HT channel is
1186 for_each_context(priv
, ctx
)
1187 iwlagn_set_rxon_chain(priv
, ctx
);
1190 if (changed
& IEEE80211_CONF_CHANGE_CHANNEL
) {
1191 for_each_context(priv
, ctx
) {
1192 /* Configure HT40 channels */
1193 if (ctx
->ht
.enabled
!= conf_is_ht(conf
))
1194 ctx
->ht
.enabled
= conf_is_ht(conf
);
1196 if (ctx
->ht
.enabled
) {
1197 /* if HT40 is used, it should not change
1198 * after associated except channel switch */
1199 if (!ctx
->ht
.is_40mhz
||
1200 !iwl_is_associated_ctx(ctx
))
1201 iwlagn_config_ht40(conf
, ctx
);
1203 ctx
->ht
.is_40mhz
= false;
1206 * Default to no protection. Protection mode will
1207 * later be set from BSS config in iwl_ht_conf
1209 ctx
->ht
.protection
= IEEE80211_HT_OP_MODE_PROTECTION_NONE
;
1211 /* if we are switching from ht to 2.4 clear flags
1212 * from any ht related info since 2.4 does not
1214 if (le16_to_cpu(ctx
->staging
.channel
) !=
1216 ctx
->staging
.flags
= 0;
1218 iwl_set_rxon_channel(priv
, channel
, ctx
);
1219 iwl_set_rxon_ht(priv
, &priv
->current_ht_config
);
1221 iwl_set_flags_for_band(priv
, ctx
, channel
->band
,
1225 iwl_update_bcast_stations(priv
);
1228 if (changed
& (IEEE80211_CONF_CHANGE_PS
|
1229 IEEE80211_CONF_CHANGE_IDLE
)) {
1230 ret
= iwl_power_update_mode(priv
, false);
1232 IWL_DEBUG_MAC80211(priv
, "Error setting sleep level\n");
1235 if (changed
& IEEE80211_CONF_CHANGE_POWER
) {
1236 IWL_DEBUG_MAC80211(priv
, "TX Power old=%d new=%d\n",
1237 priv
->tx_power_user_lmt
, conf
->power_level
);
1239 iwl_set_tx_power(priv
, conf
->power_level
, false);
1242 for_each_context(priv
, ctx
) {
1243 if (!memcmp(&ctx
->staging
, &ctx
->active
, sizeof(ctx
->staging
)))
1245 iwlagn_commit_rxon(priv
, ctx
);
1248 mutex_unlock(&priv
->mutex
);
1249 IWL_DEBUG_MAC80211(priv
, "leave\n");
1254 static void iwlagn_check_needed_chains(struct iwl_priv
*priv
,
1255 struct iwl_rxon_context
*ctx
,
1256 struct ieee80211_bss_conf
*bss_conf
)
1258 struct ieee80211_vif
*vif
= ctx
->vif
;
1259 struct iwl_rxon_context
*tmp
;
1260 struct ieee80211_sta
*sta
;
1261 struct iwl_ht_config
*ht_conf
= &priv
->current_ht_config
;
1262 struct ieee80211_sta_ht_cap
*ht_cap
;
1265 lockdep_assert_held(&priv
->mutex
);
1267 switch (vif
->type
) {
1268 case NL80211_IFTYPE_STATION
:
1270 sta
= ieee80211_find_sta(vif
, bss_conf
->bssid
);
1273 * If at all, this can only happen through a race
1274 * when the AP disconnects us while we're still
1275 * setting up the connection, in that case mac80211
1276 * will soon tell us about that.
1278 need_multiple
= false;
1283 ht_cap
= &sta
->deflink
.ht_cap
;
1285 need_multiple
= true;
1288 * If the peer advertises no support for receiving 2 and 3
1289 * stream MCS rates, it can't be transmitting them either.
1291 if (ht_cap
->mcs
.rx_mask
[1] == 0 &&
1292 ht_cap
->mcs
.rx_mask
[2] == 0) {
1293 need_multiple
= false;
1294 } else if (!(ht_cap
->mcs
.tx_params
&
1295 IEEE80211_HT_MCS_TX_DEFINED
)) {
1296 /* If it can't TX MCS at all ... */
1297 need_multiple
= false;
1298 } else if (ht_cap
->mcs
.tx_params
&
1299 IEEE80211_HT_MCS_TX_RX_DIFF
) {
1303 * But if it can receive them, it might still not
1304 * be able to transmit them, which is what we need
1305 * to check here -- so check the number of streams
1306 * it advertises for TX (if different from RX).
1309 maxstreams
= (ht_cap
->mcs
.tx_params
&
1310 IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK
);
1312 IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT
;
1315 if (maxstreams
<= 1)
1316 need_multiple
= false;
1321 case NL80211_IFTYPE_ADHOC
:
1323 need_multiple
= false;
1326 /* only AP really */
1327 need_multiple
= true;
1331 ctx
->ht_need_multiple_chains
= need_multiple
;
1333 if (!need_multiple
) {
1334 /* check all contexts */
1335 for_each_context(priv
, tmp
) {
1338 if (tmp
->ht_need_multiple_chains
) {
1339 need_multiple
= true;
1345 ht_conf
->single_chain_sufficient
= !need_multiple
;
1348 static void iwlagn_chain_noise_reset(struct iwl_priv
*priv
)
1350 struct iwl_chain_noise_data
*data
= &priv
->chain_noise_data
;
1353 if (priv
->calib_disabled
& IWL_CHAIN_NOISE_CALIB_DISABLED
)
1356 if ((data
->state
== IWL_CHAIN_NOISE_ALIVE
) &&
1357 iwl_is_any_associated(priv
)) {
1358 struct iwl_calib_chain_noise_reset_cmd cmd
;
1360 /* clear data for chain noise calibration algorithm */
1361 data
->chain_noise_a
= 0;
1362 data
->chain_noise_b
= 0;
1363 data
->chain_noise_c
= 0;
1364 data
->chain_signal_a
= 0;
1365 data
->chain_signal_b
= 0;
1366 data
->chain_signal_c
= 0;
1367 data
->beacon_count
= 0;
1369 memset(&cmd
, 0, sizeof(cmd
));
1370 iwl_set_calib_hdr(&cmd
.hdr
,
1371 priv
->phy_calib_chain_noise_reset_cmd
);
1372 ret
= iwl_dvm_send_cmd_pdu(priv
,
1373 REPLY_PHY_CALIBRATION_CMD
,
1374 0, sizeof(cmd
), &cmd
);
1377 "Could not send REPLY_PHY_CALIBRATION_CMD\n");
1378 data
->state
= IWL_CHAIN_NOISE_ACCUMULATE
;
1379 IWL_DEBUG_CALIB(priv
, "Run chain_noise_calibrate\n");
1383 void iwlagn_bss_info_changed(struct ieee80211_hw
*hw
,
1384 struct ieee80211_vif
*vif
,
1385 struct ieee80211_bss_conf
*bss_conf
,
1388 struct iwl_priv
*priv
= IWL_MAC80211_GET_DVM(hw
);
1389 struct iwl_rxon_context
*ctx
= iwl_rxon_ctx_from_vif(vif
);
1393 mutex_lock(&priv
->mutex
);
1395 if (changes
& BSS_CHANGED_IDLE
&& vif
->cfg
.idle
) {
1397 * If we go idle, then clearly no "passive-no-rx"
1398 * workaround is needed any more, this is a reset.
1400 iwlagn_lift_passive_no_rx(priv
);
1403 if (unlikely(!iwl_is_ready(priv
))) {
1404 IWL_DEBUG_MAC80211(priv
, "leave - not ready\n");
1405 mutex_unlock(&priv
->mutex
);
1409 if (unlikely(!ctx
->vif
)) {
1410 IWL_DEBUG_MAC80211(priv
, "leave - vif is NULL\n");
1411 mutex_unlock(&priv
->mutex
);
1415 if (changes
& BSS_CHANGED_BEACON_INT
)
1418 if (changes
& BSS_CHANGED_QOS
) {
1419 ctx
->qos_data
.qos_active
= bss_conf
->qos
;
1420 iwlagn_update_qos(priv
, ctx
);
1423 ctx
->staging
.assoc_id
= cpu_to_le16(vif
->cfg
.aid
);
1424 if (vif
->bss_conf
.use_short_preamble
)
1425 ctx
->staging
.flags
|= RXON_FLG_SHORT_PREAMBLE_MSK
;
1427 ctx
->staging
.flags
&= ~RXON_FLG_SHORT_PREAMBLE_MSK
;
1429 if (changes
& BSS_CHANGED_ASSOC
) {
1430 if (vif
->cfg
.assoc
) {
1431 priv
->timestamp
= bss_conf
->sync_tsf
;
1432 ctx
->staging
.filter_flags
|= RXON_FILTER_ASSOC_MSK
;
1434 ctx
->staging
.filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
1436 if (ctx
->ctxid
== IWL_RXON_CTX_BSS
)
1437 priv
->have_rekey_data
= false;
1440 iwlagn_bt_coex_rssi_monitor(priv
);
1443 if (ctx
->ht
.enabled
) {
1444 ctx
->ht
.protection
= bss_conf
->ht_operation_mode
&
1445 IEEE80211_HT_OP_MODE_PROTECTION
;
1446 ctx
->ht
.non_gf_sta_present
= !!(bss_conf
->ht_operation_mode
&
1447 IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT
);
1448 iwlagn_check_needed_chains(priv
, ctx
, bss_conf
);
1449 iwl_set_rxon_ht(priv
, &priv
->current_ht_config
);
1452 iwlagn_set_rxon_chain(priv
, ctx
);
1454 if (bss_conf
->use_cts_prot
&& (priv
->band
!= NL80211_BAND_5GHZ
))
1455 ctx
->staging
.flags
|= RXON_FLG_TGG_PROTECT_MSK
;
1457 ctx
->staging
.flags
&= ~RXON_FLG_TGG_PROTECT_MSK
;
1459 if (bss_conf
->use_cts_prot
)
1460 ctx
->staging
.flags
|= RXON_FLG_SELF_CTS_EN
;
1462 ctx
->staging
.flags
&= ~RXON_FLG_SELF_CTS_EN
;
1464 memcpy(ctx
->staging
.bssid_addr
, bss_conf
->bssid
, ETH_ALEN
);
1466 if (vif
->type
== NL80211_IFTYPE_AP
||
1467 vif
->type
== NL80211_IFTYPE_ADHOC
) {
1468 if (vif
->bss_conf
.enable_beacon
) {
1469 ctx
->staging
.filter_flags
|= RXON_FILTER_ASSOC_MSK
;
1470 priv
->beacon_ctx
= ctx
;
1472 ctx
->staging
.filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
1473 priv
->beacon_ctx
= NULL
;
1478 * If the ucode decides to do beacon filtering before
1479 * association, it will lose beacons that are needed
1480 * before sending frames out on passive channels. This
1481 * causes association failures on those channels. Enable
1482 * receiving beacons in such cases.
1485 if (vif
->type
== NL80211_IFTYPE_STATION
) {
1486 if (!vif
->cfg
.assoc
)
1487 ctx
->staging
.filter_flags
|= RXON_FILTER_BCON_AWARE_MSK
;
1489 ctx
->staging
.filter_flags
&=
1490 ~RXON_FILTER_BCON_AWARE_MSK
;
1493 if (force
|| memcmp(&ctx
->staging
, &ctx
->active
, sizeof(ctx
->staging
)))
1494 iwlagn_commit_rxon(priv
, ctx
);
1496 if (changes
& BSS_CHANGED_ASSOC
&& vif
->cfg
.assoc
) {
1498 * The chain noise calibration will enable PM upon
1499 * completion. If calibration has already been run
1500 * then we need to enable power management here.
1502 if (priv
->chain_noise_data
.state
== IWL_CHAIN_NOISE_DONE
)
1503 iwl_power_update_mode(priv
, false);
1505 /* Enable RX differential gain and sensitivity calibrations */
1506 iwlagn_chain_noise_reset(priv
);
1507 priv
->start_calib
= 1;
1510 if (changes
& BSS_CHANGED_IBSS
) {
1511 ret
= iwlagn_manage_ibss_station(priv
, vif
,
1512 vif
->cfg
.ibss_joined
);
1514 IWL_ERR(priv
, "failed to %s IBSS station %pM\n",
1515 vif
->cfg
.ibss_joined
? "add" : "remove",
1519 if (changes
& BSS_CHANGED_BEACON
&& priv
->beacon_ctx
== ctx
) {
1520 if (iwlagn_update_beacon(priv
, vif
))
1521 IWL_ERR(priv
, "Error updating beacon\n");
1524 mutex_unlock(&priv
->mutex
);
1527 void iwlagn_post_scan(struct iwl_priv
*priv
)
1529 struct iwl_rxon_context
*ctx
;
1532 * We do not commit power settings while scan is pending,
1533 * do it now if the settings changed.
1535 iwl_power_set_mode(priv
, &priv
->power_data
.sleep_cmd_next
, false);
1536 iwl_set_tx_power(priv
, priv
->tx_power_next
, false);
1539 * Since setting the RXON may have been deferred while
1540 * performing the scan, fire one off if needed
1542 for_each_context(priv
, ctx
)
1543 if (memcmp(&ctx
->staging
, &ctx
->active
, sizeof(ctx
->staging
)))
1544 iwlagn_commit_rxon(priv
, ctx
);
1546 iwlagn_set_pan_params(priv
);