1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * Microsemi/Microchip SoCs serial gpio driver
5 * Author: Lars Povlsen <lars.povlsen@microchip.com>
7 * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
10 #include <linux/bitfield.h>
11 #include <linux/bits.h>
12 #include <linux/clk.h>
13 #include <linux/gpio/driver.h>
15 #include <linux/mfd/ocelot.h>
16 #include <linux/mod_devicetable.h>
17 #include <linux/module.h>
18 #include <linux/platform_device.h>
19 #include <linux/property.h>
20 #include <linux/regmap.h>
21 #include <linux/reset.h>
22 #include <linux/spinlock.h>
24 #include <linux/pinctrl/pinconf.h>
25 #include <linux/pinctrl/pinmux.h>
30 #define SGPIO_BITS_PER_WORD 32
31 #define SGPIO_MAX_BITS 4
32 #define SGPIO_SRC_BITS 3 /* 3 bit wide field per pin */
55 SGPIO_FLAGS_HAS_IRQ
= BIT(0),
58 struct sgpio_properties
{
64 #define SGPIO_LUTON_AUTO_REPEAT BIT(5)
65 #define SGPIO_LUTON_PORT_WIDTH GENMASK(3, 2)
66 #define SGPIO_LUTON_CLK_FREQ GENMASK(11, 0)
67 #define SGPIO_LUTON_BIT_SOURCE GENMASK(11, 0)
69 #define SGPIO_OCELOT_AUTO_REPEAT BIT(10)
70 #define SGPIO_OCELOT_SINGLE_SHOT BIT(11)
71 #define SGPIO_OCELOT_PORT_WIDTH GENMASK(8, 7)
72 #define SGPIO_OCELOT_CLK_FREQ GENMASK(19, 8)
73 #define SGPIO_OCELOT_BIT_SOURCE GENMASK(23, 12)
75 #define SGPIO_SPARX5_AUTO_REPEAT BIT(6)
76 #define SGPIO_SPARX5_SINGLE_SHOT BIT(7)
77 #define SGPIO_SPARX5_PORT_WIDTH GENMASK(4, 3)
78 #define SGPIO_SPARX5_CLK_FREQ GENMASK(19, 8)
79 #define SGPIO_SPARX5_BIT_SOURCE GENMASK(23, 12)
81 #define SGPIO_MASTER_INTR_ENA BIT(0)
83 #define SGPIO_INT_TRG_LEVEL 0
84 #define SGPIO_INT_TRG_EDGE 1
85 #define SGPIO_INT_TRG_EDGE_FALL 2
86 #define SGPIO_INT_TRG_EDGE_RISE 3
88 #define SGPIO_TRG_LEVEL_HIGH 0
89 #define SGPIO_TRG_LEVEL_LOW 1
91 static const struct sgpio_properties properties_luton
= {
92 .arch
= SGPIO_ARCH_LUTON
,
93 .regoff
= { 0x00, 0x09, 0x29, 0x2a, 0x2b },
96 static const struct sgpio_properties properties_ocelot
= {
97 .arch
= SGPIO_ARCH_OCELOT
,
98 .regoff
= { 0x00, 0x06, 0x26, 0x04, 0x05 },
101 static const struct sgpio_properties properties_sparx5
= {
102 .arch
= SGPIO_ARCH_SPARX5
,
103 .flags
= SGPIO_FLAGS_HAS_IRQ
,
104 .regoff
= { 0x00, 0x06, 0x26, 0x04, 0x05, 0x2a, 0x32, 0x3a, 0x3e, 0x42 },
107 static const char * const functions
[] = { "gpio" };
110 struct sgpio_priv
*priv
;
112 struct gpio_chip gpio
;
113 struct pinctrl_desc pctl_desc
;
118 struct sgpio_bank in
;
119 struct sgpio_bank out
;
124 const struct sgpio_properties
*properties
;
126 /* protects the config register and single shot mode */
127 struct mutex poll_lock
;
130 struct sgpio_port_addr
{
135 static inline void sgpio_pin_to_addr(struct sgpio_priv
*priv
, int pin
,
136 struct sgpio_port_addr
*addr
)
138 addr
->port
= pin
/ priv
->bitcount
;
139 addr
->bit
= pin
% priv
->bitcount
;
142 static inline int sgpio_addr_to_pin(struct sgpio_priv
*priv
, int port
, int bit
)
144 return bit
+ port
* priv
->bitcount
;
147 static inline u32
sgpio_get_addr(struct sgpio_priv
*priv
, u32 rno
, u32 off
)
149 return (priv
->properties
->regoff
[rno
] + off
) *
150 regmap_get_reg_stride(priv
->regs
);
153 static u32
sgpio_readl(struct sgpio_priv
*priv
, u32 rno
, u32 off
)
155 u32 addr
= sgpio_get_addr(priv
, rno
, off
);
159 ret
= regmap_read(priv
->regs
, addr
, &val
);
160 WARN_ONCE(ret
, "error reading sgpio reg %d\n", ret
);
165 static void sgpio_writel(struct sgpio_priv
*priv
,
166 u32 val
, u32 rno
, u32 off
)
168 u32 addr
= sgpio_get_addr(priv
, rno
, off
);
171 ret
= regmap_write(priv
->regs
, addr
, val
);
172 WARN_ONCE(ret
, "error writing sgpio reg %d\n", ret
);
175 static inline void sgpio_clrsetbits(struct sgpio_priv
*priv
,
176 u32 rno
, u32 off
, u32 clear
, u32 set
)
178 u32 addr
= sgpio_get_addr(priv
, rno
, off
);
181 ret
= regmap_update_bits(priv
->regs
, addr
, clear
| set
, set
);
182 WARN_ONCE(ret
, "error updating sgpio reg %d\n", ret
);
185 static inline void sgpio_configure_bitstream(struct sgpio_priv
*priv
)
187 int width
= priv
->bitcount
- 1;
190 switch (priv
->properties
->arch
) {
191 case SGPIO_ARCH_LUTON
:
192 clr
= SGPIO_LUTON_PORT_WIDTH
;
193 set
= SGPIO_LUTON_AUTO_REPEAT
|
194 FIELD_PREP(SGPIO_LUTON_PORT_WIDTH
, width
);
196 case SGPIO_ARCH_OCELOT
:
197 clr
= SGPIO_OCELOT_PORT_WIDTH
;
198 set
= SGPIO_OCELOT_AUTO_REPEAT
|
199 FIELD_PREP(SGPIO_OCELOT_PORT_WIDTH
, width
);
201 case SGPIO_ARCH_SPARX5
:
202 clr
= SGPIO_SPARX5_PORT_WIDTH
;
203 set
= SGPIO_SPARX5_AUTO_REPEAT
|
204 FIELD_PREP(SGPIO_SPARX5_PORT_WIDTH
, width
);
209 sgpio_clrsetbits(priv
, REG_SIO_CONFIG
, 0, clr
, set
);
212 static inline void sgpio_configure_clock(struct sgpio_priv
*priv
, u32 clkfrq
)
216 switch (priv
->properties
->arch
) {
217 case SGPIO_ARCH_LUTON
:
218 clr
= SGPIO_LUTON_CLK_FREQ
;
219 set
= FIELD_PREP(SGPIO_LUTON_CLK_FREQ
, clkfrq
);
221 case SGPIO_ARCH_OCELOT
:
222 clr
= SGPIO_OCELOT_CLK_FREQ
;
223 set
= FIELD_PREP(SGPIO_OCELOT_CLK_FREQ
, clkfrq
);
225 case SGPIO_ARCH_SPARX5
:
226 clr
= SGPIO_SPARX5_CLK_FREQ
;
227 set
= FIELD_PREP(SGPIO_SPARX5_CLK_FREQ
, clkfrq
);
232 sgpio_clrsetbits(priv
, REG_SIO_CLOCK
, 0, clr
, set
);
235 static int sgpio_single_shot(struct sgpio_priv
*priv
)
237 u32 addr
= sgpio_get_addr(priv
, REG_SIO_CONFIG
, 0);
240 unsigned int single_shot
;
241 unsigned int auto_repeat
;
243 switch (priv
->properties
->arch
) {
244 case SGPIO_ARCH_LUTON
:
245 /* not supported for now */
247 case SGPIO_ARCH_OCELOT
:
248 single_shot
= SGPIO_OCELOT_SINGLE_SHOT
;
249 auto_repeat
= SGPIO_OCELOT_AUTO_REPEAT
;
251 case SGPIO_ARCH_SPARX5
:
252 single_shot
= SGPIO_SPARX5_SINGLE_SHOT
;
253 auto_repeat
= SGPIO_SPARX5_AUTO_REPEAT
;
260 * Trigger immediate burst. This only works when auto repeat is turned
261 * off. Otherwise, the single shot bit will never be cleared by the
262 * hardware. Measurements showed that an update might take as long as
263 * the burst gap. On a LAN9668 this is about 50ms for the largest
265 * After the manual burst, reenable the auto repeat mode again.
267 mutex_lock(&priv
->poll_lock
);
268 ret
= regmap_update_bits(priv
->regs
, addr
, single_shot
| auto_repeat
,
273 ret
= regmap_read_poll_timeout(priv
->regs
, addr
, ctrl
,
274 !(ctrl
& single_shot
), 100, 60000);
276 /* reenable auto repeat mode even if there was an error */
277 ret2
= regmap_update_bits(priv
->regs
, addr
, auto_repeat
, auto_repeat
);
279 mutex_unlock(&priv
->poll_lock
);
284 static int sgpio_output_set(struct sgpio_priv
*priv
,
285 struct sgpio_port_addr
*addr
,
288 unsigned int bit
= SGPIO_SRC_BITS
* addr
->bit
;
289 u32 reg
= sgpio_get_addr(priv
, REG_PORT_CONFIG
, addr
->port
);
294 switch (priv
->properties
->arch
) {
295 case SGPIO_ARCH_LUTON
:
296 clr
= FIELD_PREP(SGPIO_LUTON_BIT_SOURCE
, BIT(bit
));
297 set
= FIELD_PREP(SGPIO_LUTON_BIT_SOURCE
, value
<< bit
);
299 case SGPIO_ARCH_OCELOT
:
300 clr
= FIELD_PREP(SGPIO_OCELOT_BIT_SOURCE
, BIT(bit
));
301 set
= FIELD_PREP(SGPIO_OCELOT_BIT_SOURCE
, value
<< bit
);
303 case SGPIO_ARCH_SPARX5
:
304 clr
= FIELD_PREP(SGPIO_SPARX5_BIT_SOURCE
, BIT(bit
));
305 set
= FIELD_PREP(SGPIO_SPARX5_BIT_SOURCE
, value
<< bit
);
311 ret
= regmap_update_bits_check(priv
->regs
, reg
, clr
| set
, set
,
317 ret
= sgpio_single_shot(priv
);
325 static int sgpio_output_get(struct sgpio_priv
*priv
,
326 struct sgpio_port_addr
*addr
)
328 u32 val
, portval
= sgpio_readl(priv
, REG_PORT_CONFIG
, addr
->port
);
329 unsigned int bit
= SGPIO_SRC_BITS
* addr
->bit
;
331 switch (priv
->properties
->arch
) {
332 case SGPIO_ARCH_LUTON
:
333 val
= FIELD_GET(SGPIO_LUTON_BIT_SOURCE
, portval
);
335 case SGPIO_ARCH_OCELOT
:
336 val
= FIELD_GET(SGPIO_OCELOT_BIT_SOURCE
, portval
);
338 case SGPIO_ARCH_SPARX5
:
339 val
= FIELD_GET(SGPIO_SPARX5_BIT_SOURCE
, portval
);
345 return !!(val
& BIT(bit
));
348 static int sgpio_input_get(struct sgpio_priv
*priv
,
349 struct sgpio_port_addr
*addr
)
351 return !!(sgpio_readl(priv
, REG_INPUT_DATA
, addr
->bit
) & BIT(addr
->port
));
354 static int sgpio_pinconf_get(struct pinctrl_dev
*pctldev
,
355 unsigned int pin
, unsigned long *config
)
357 struct sgpio_bank
*bank
= pinctrl_dev_get_drvdata(pctldev
);
358 u32 param
= pinconf_to_config_param(*config
);
359 struct sgpio_priv
*priv
= bank
->priv
;
360 struct sgpio_port_addr addr
;
363 sgpio_pin_to_addr(priv
, pin
, &addr
);
366 case PIN_CONFIG_INPUT_ENABLE
:
367 val
= bank
->is_input
;
370 case PIN_CONFIG_OUTPUT_ENABLE
:
371 val
= !bank
->is_input
;
374 case PIN_CONFIG_OUTPUT
:
377 val
= sgpio_output_get(priv
, &addr
);
384 *config
= pinconf_to_config_packed(param
, val
);
389 static int sgpio_pinconf_set(struct pinctrl_dev
*pctldev
, unsigned int pin
,
390 unsigned long *configs
, unsigned int num_configs
)
392 struct sgpio_bank
*bank
= pinctrl_dev_get_drvdata(pctldev
);
393 struct sgpio_priv
*priv
= bank
->priv
;
394 struct sgpio_port_addr addr
;
398 sgpio_pin_to_addr(priv
, pin
, &addr
);
400 for (cfg
= 0; cfg
< num_configs
; cfg
++) {
401 param
= pinconf_to_config_param(configs
[cfg
]);
402 arg
= pinconf_to_config_argument(configs
[cfg
]);
405 case PIN_CONFIG_OUTPUT
:
408 err
= sgpio_output_set(priv
, &addr
, arg
);
419 static const struct pinconf_ops sgpio_confops
= {
421 .pin_config_get
= sgpio_pinconf_get
,
422 .pin_config_set
= sgpio_pinconf_set
,
423 .pin_config_config_dbg_show
= pinconf_generic_dump_config
,
426 static int sgpio_get_functions_count(struct pinctrl_dev
*pctldev
)
431 static const char *sgpio_get_function_name(struct pinctrl_dev
*pctldev
,
432 unsigned int function
)
437 static int sgpio_get_function_groups(struct pinctrl_dev
*pctldev
,
438 unsigned int function
,
439 const char *const **groups
,
440 unsigned *const num_groups
)
443 *num_groups
= ARRAY_SIZE(functions
);
448 static int sgpio_pinmux_set_mux(struct pinctrl_dev
*pctldev
,
449 unsigned int selector
, unsigned int group
)
454 static int sgpio_gpio_set_direction(struct pinctrl_dev
*pctldev
,
455 struct pinctrl_gpio_range
*range
,
456 unsigned int pin
, bool input
)
458 struct sgpio_bank
*bank
= pinctrl_dev_get_drvdata(pctldev
);
460 return (input
== bank
->is_input
) ? 0 : -EINVAL
;
463 static int sgpio_gpio_request_enable(struct pinctrl_dev
*pctldev
,
464 struct pinctrl_gpio_range
*range
,
467 struct sgpio_bank
*bank
= pinctrl_dev_get_drvdata(pctldev
);
468 struct sgpio_priv
*priv
= bank
->priv
;
469 struct sgpio_port_addr addr
;
471 sgpio_pin_to_addr(priv
, offset
, &addr
);
473 if ((priv
->ports
& BIT(addr
.port
)) == 0) {
474 dev_warn(priv
->dev
, "Request port %d.%d: Port is not enabled\n",
475 addr
.port
, addr
.bit
);
482 static const struct pinmux_ops sgpio_pmx_ops
= {
483 .get_functions_count
= sgpio_get_functions_count
,
484 .get_function_name
= sgpio_get_function_name
,
485 .get_function_groups
= sgpio_get_function_groups
,
486 .set_mux
= sgpio_pinmux_set_mux
,
487 .gpio_set_direction
= sgpio_gpio_set_direction
,
488 .gpio_request_enable
= sgpio_gpio_request_enable
,
491 static int sgpio_pctl_get_groups_count(struct pinctrl_dev
*pctldev
)
493 struct sgpio_bank
*bank
= pinctrl_dev_get_drvdata(pctldev
);
495 return bank
->pctl_desc
.npins
;
498 static const char *sgpio_pctl_get_group_name(struct pinctrl_dev
*pctldev
,
501 struct sgpio_bank
*bank
= pinctrl_dev_get_drvdata(pctldev
);
503 return bank
->pctl_desc
.pins
[group
].name
;
506 static int sgpio_pctl_get_group_pins(struct pinctrl_dev
*pctldev
,
508 const unsigned int **pins
,
509 unsigned int *num_pins
)
511 struct sgpio_bank
*bank
= pinctrl_dev_get_drvdata(pctldev
);
513 *pins
= &bank
->pctl_desc
.pins
[group
].number
;
519 static const struct pinctrl_ops sgpio_pctl_ops
= {
520 .get_groups_count
= sgpio_pctl_get_groups_count
,
521 .get_group_name
= sgpio_pctl_get_group_name
,
522 .get_group_pins
= sgpio_pctl_get_group_pins
,
523 .dt_node_to_map
= pinconf_generic_dt_node_to_map_pin
,
524 .dt_free_map
= pinconf_generic_dt_free_map
,
527 static int microchip_sgpio_direction_input(struct gpio_chip
*gc
, unsigned int gpio
)
529 struct sgpio_bank
*bank
= gpiochip_get_data(gc
);
531 /* Fixed-position function */
532 return bank
->is_input
? 0 : -EINVAL
;
535 static int microchip_sgpio_direction_output(struct gpio_chip
*gc
,
536 unsigned int gpio
, int value
)
538 struct sgpio_bank
*bank
= gpiochip_get_data(gc
);
539 struct sgpio_priv
*priv
= bank
->priv
;
540 struct sgpio_port_addr addr
;
542 /* Fixed-position function */
546 sgpio_pin_to_addr(priv
, gpio
, &addr
);
548 return sgpio_output_set(priv
, &addr
, value
);
551 static int microchip_sgpio_get_direction(struct gpio_chip
*gc
, unsigned int gpio
)
553 struct sgpio_bank
*bank
= gpiochip_get_data(gc
);
555 return bank
->is_input
? GPIO_LINE_DIRECTION_IN
: GPIO_LINE_DIRECTION_OUT
;
558 static void microchip_sgpio_set_value(struct gpio_chip
*gc
,
559 unsigned int gpio
, int value
)
561 microchip_sgpio_direction_output(gc
, gpio
, value
);
564 static int microchip_sgpio_get_value(struct gpio_chip
*gc
, unsigned int gpio
)
566 struct sgpio_bank
*bank
= gpiochip_get_data(gc
);
567 struct sgpio_priv
*priv
= bank
->priv
;
568 struct sgpio_port_addr addr
;
570 sgpio_pin_to_addr(priv
, gpio
, &addr
);
572 return bank
->is_input
? sgpio_input_get(priv
, &addr
) : sgpio_output_get(priv
, &addr
);
575 static int microchip_sgpio_of_xlate(struct gpio_chip
*gc
,
576 const struct of_phandle_args
*gpiospec
,
579 struct sgpio_bank
*bank
= gpiochip_get_data(gc
);
580 struct sgpio_priv
*priv
= bank
->priv
;
584 * Note that the SGIO pin is defined by *2* numbers, a port
585 * number between 0 and 31, and a bit index, 0 to 3.
587 if (gpiospec
->args
[0] > SGPIO_BITS_PER_WORD
||
588 gpiospec
->args
[1] > priv
->bitcount
)
591 pin
= sgpio_addr_to_pin(priv
, gpiospec
->args
[0], gpiospec
->args
[1]);
597 *flags
= gpiospec
->args
[2];
602 static int microchip_sgpio_get_ports(struct sgpio_priv
*priv
)
604 const char *range_property_name
= "microchip,sgpio-port-ranges";
605 struct device
*dev
= priv
->dev
;
606 u32 range_params
[64];
609 /* Calculate port mask */
610 nranges
= device_property_count_u32(dev
, range_property_name
);
611 if (nranges
< 2 || nranges
% 2 || nranges
> ARRAY_SIZE(range_params
)) {
612 dev_err(dev
, "%s port range: '%s' property\n",
613 nranges
== -EINVAL
? "Missing" : "Invalid",
614 range_property_name
);
618 ret
= device_property_read_u32_array(dev
, range_property_name
,
619 range_params
, nranges
);
621 dev_err(dev
, "failed to parse '%s' property: %d\n",
622 range_property_name
, ret
);
625 for (i
= 0; i
< nranges
; i
+= 2) {
628 start
= range_params
[i
];
629 end
= range_params
[i
+ 1];
630 if (start
> end
|| end
>= SGPIO_BITS_PER_WORD
) {
631 dev_err(dev
, "Ill-formed port-range [%d:%d]\n",
634 priv
->ports
|= GENMASK(end
, start
);
640 static void microchip_sgpio_irq_settype(struct irq_data
*data
,
644 struct gpio_chip
*chip
= irq_data_get_irq_chip_data(data
);
645 struct sgpio_bank
*bank
= gpiochip_get_data(chip
);
646 unsigned int gpio
= irqd_to_hwirq(data
);
647 struct sgpio_port_addr addr
;
651 sgpio_pin_to_addr(bank
->priv
, gpio
, &addr
);
653 spin_lock_irqsave(&bank
->priv
->lock
, flags
);
655 /* Disable interrupt while changing type */
656 ena
= sgpio_readl(bank
->priv
, REG_INT_ENABLE
, addr
.bit
);
657 sgpio_writel(bank
->priv
, ena
& ~BIT(addr
.port
), REG_INT_ENABLE
, addr
.bit
);
659 /* Type value spread over 2 registers sets: low, high bit */
660 sgpio_clrsetbits(bank
->priv
, REG_INT_TRIGGER
, addr
.bit
,
661 BIT(addr
.port
), (!!(type
& 0x1)) << addr
.port
);
662 sgpio_clrsetbits(bank
->priv
, REG_INT_TRIGGER
, SGPIO_MAX_BITS
+ addr
.bit
,
663 BIT(addr
.port
), (!!(type
& 0x2)) << addr
.port
);
665 if (type
== SGPIO_INT_TRG_LEVEL
)
666 sgpio_clrsetbits(bank
->priv
, REG_INT_POLARITY
, addr
.bit
,
667 BIT(addr
.port
), polarity
<< addr
.port
);
669 /* Possibly re-enable interrupts */
670 sgpio_writel(bank
->priv
, ena
, REG_INT_ENABLE
, addr
.bit
);
672 spin_unlock_irqrestore(&bank
->priv
->lock
, flags
);
675 static void microchip_sgpio_irq_setreg(struct irq_data
*data
,
679 struct gpio_chip
*chip
= irq_data_get_irq_chip_data(data
);
680 struct sgpio_bank
*bank
= gpiochip_get_data(chip
);
681 unsigned int gpio
= irqd_to_hwirq(data
);
682 struct sgpio_port_addr addr
;
684 sgpio_pin_to_addr(bank
->priv
, gpio
, &addr
);
687 sgpio_clrsetbits(bank
->priv
, reg
, addr
.bit
, BIT(addr
.port
), 0);
689 sgpio_clrsetbits(bank
->priv
, reg
, addr
.bit
, 0, BIT(addr
.port
));
692 static void microchip_sgpio_irq_mask(struct irq_data
*data
)
694 struct gpio_chip
*chip
= irq_data_get_irq_chip_data(data
);
696 microchip_sgpio_irq_setreg(data
, REG_INT_ENABLE
, true);
697 gpiochip_disable_irq(chip
, data
->hwirq
);
700 static void microchip_sgpio_irq_unmask(struct irq_data
*data
)
702 struct gpio_chip
*chip
= irq_data_get_irq_chip_data(data
);
704 gpiochip_enable_irq(chip
, data
->hwirq
);
705 microchip_sgpio_irq_setreg(data
, REG_INT_ENABLE
, false);
708 static void microchip_sgpio_irq_ack(struct irq_data
*data
)
710 struct gpio_chip
*chip
= irq_data_get_irq_chip_data(data
);
711 struct sgpio_bank
*bank
= gpiochip_get_data(chip
);
712 unsigned int gpio
= irqd_to_hwirq(data
);
713 struct sgpio_port_addr addr
;
715 sgpio_pin_to_addr(bank
->priv
, gpio
, &addr
);
717 sgpio_writel(bank
->priv
, BIT(addr
.port
), REG_INT_ACK
, addr
.bit
);
720 static int microchip_sgpio_irq_set_type(struct irq_data
*data
, unsigned int type
)
723 case IRQ_TYPE_EDGE_BOTH
:
724 irq_set_handler_locked(data
, handle_edge_irq
);
725 microchip_sgpio_irq_settype(data
, SGPIO_INT_TRG_EDGE
, 0);
727 case IRQ_TYPE_EDGE_RISING
:
728 irq_set_handler_locked(data
, handle_edge_irq
);
729 microchip_sgpio_irq_settype(data
, SGPIO_INT_TRG_EDGE_RISE
, 0);
731 case IRQ_TYPE_EDGE_FALLING
:
732 irq_set_handler_locked(data
, handle_edge_irq
);
733 microchip_sgpio_irq_settype(data
, SGPIO_INT_TRG_EDGE_FALL
, 0);
735 case IRQ_TYPE_LEVEL_HIGH
:
736 irq_set_handler_locked(data
, handle_level_irq
);
737 microchip_sgpio_irq_settype(data
, SGPIO_INT_TRG_LEVEL
, SGPIO_TRG_LEVEL_HIGH
);
739 case IRQ_TYPE_LEVEL_LOW
:
740 irq_set_handler_locked(data
, handle_level_irq
);
741 microchip_sgpio_irq_settype(data
, SGPIO_INT_TRG_LEVEL
, SGPIO_TRG_LEVEL_LOW
);
750 static const struct irq_chip microchip_sgpio_irqchip
= {
752 .irq_mask
= microchip_sgpio_irq_mask
,
753 .irq_ack
= microchip_sgpio_irq_ack
,
754 .irq_unmask
= microchip_sgpio_irq_unmask
,
755 .irq_set_type
= microchip_sgpio_irq_set_type
,
756 .flags
= IRQCHIP_IMMUTABLE
,
757 GPIOCHIP_IRQ_RESOURCE_HELPERS
,
760 static void sgpio_irq_handler(struct irq_desc
*desc
)
762 struct irq_chip
*parent_chip
= irq_desc_get_chip(desc
);
763 struct gpio_chip
*chip
= irq_desc_get_handler_data(desc
);
764 struct sgpio_bank
*bank
= gpiochip_get_data(chip
);
765 struct sgpio_priv
*priv
= bank
->priv
;
769 for (bit
= 0; bit
< priv
->bitcount
; bit
++) {
770 val
= sgpio_readl(priv
, REG_INT_IDENT
, bit
);
774 chained_irq_enter(parent_chip
, desc
);
776 for_each_set_bit(port
, &val
, SGPIO_BITS_PER_WORD
) {
777 gpio
= sgpio_addr_to_pin(priv
, port
, bit
);
778 generic_handle_domain_irq(chip
->irq
.domain
, gpio
);
781 chained_irq_exit(parent_chip
, desc
);
785 static int microchip_sgpio_register_bank(struct device
*dev
,
786 struct sgpio_priv
*priv
,
787 struct fwnode_handle
*fwnode
,
790 struct pinctrl_pin_desc
*pins
;
791 struct pinctrl_desc
*pctl_desc
;
792 struct pinctrl_dev
*pctldev
;
793 struct sgpio_bank
*bank
;
794 struct gpio_chip
*gc
;
798 /* Get overall bank struct */
799 bank
= (bankno
== 0) ? &priv
->in
: &priv
->out
;
802 if (fwnode_property_read_u32(fwnode
, "ngpios", &ngpios
)) {
803 dev_info(dev
, "failed to get number of gpios for bank%d\n",
808 priv
->bitcount
= ngpios
/ SGPIO_BITS_PER_WORD
;
809 if (priv
->bitcount
> SGPIO_MAX_BITS
) {
810 dev_err(dev
, "Bit width exceeds maximum (%d)\n",
815 pctl_desc
= &bank
->pctl_desc
;
816 pctl_desc
->name
= devm_kasprintf(dev
, GFP_KERNEL
, "%s-%sput",
818 bank
->is_input
? "in" : "out");
819 if (!pctl_desc
->name
)
822 pctl_desc
->pctlops
= &sgpio_pctl_ops
;
823 pctl_desc
->pmxops
= &sgpio_pmx_ops
;
824 pctl_desc
->confops
= &sgpio_confops
;
825 pctl_desc
->owner
= THIS_MODULE
;
827 pins
= devm_kzalloc(dev
, sizeof(*pins
)*ngpios
, GFP_KERNEL
);
831 pctl_desc
->npins
= ngpios
;
832 pctl_desc
->pins
= pins
;
834 for (i
= 0; i
< ngpios
; i
++) {
835 struct sgpio_port_addr addr
;
837 sgpio_pin_to_addr(priv
, i
, &addr
);
840 pins
[i
].name
= devm_kasprintf(dev
, GFP_KERNEL
,
842 bank
->is_input
? 'I' : 'O',
843 addr
.port
, addr
.bit
);
848 pctldev
= devm_pinctrl_register(dev
, pctl_desc
, bank
);
850 return dev_err_probe(dev
, PTR_ERR(pctldev
), "Failed to register pinctrl\n");
853 gc
->label
= pctl_desc
->name
;
856 gc
->owner
= THIS_MODULE
;
857 gc
->get_direction
= microchip_sgpio_get_direction
;
858 gc
->direction_input
= microchip_sgpio_direction_input
;
859 gc
->direction_output
= microchip_sgpio_direction_output
;
860 gc
->get
= microchip_sgpio_get_value
;
861 gc
->set
= microchip_sgpio_set_value
;
862 gc
->request
= gpiochip_generic_request
;
863 gc
->free
= gpiochip_generic_free
;
864 gc
->of_xlate
= microchip_sgpio_of_xlate
;
865 gc
->of_gpio_n_cells
= 3;
868 gc
->can_sleep
= !bank
->is_input
;
870 if (bank
->is_input
&& priv
->properties
->flags
& SGPIO_FLAGS_HAS_IRQ
) {
873 irq
= fwnode_irq_get(fwnode
, 0);
875 struct gpio_irq_chip
*girq
= &gc
->irq
;
877 gpio_irq_chip_set_chip(girq
, µchip_sgpio_irqchip
);
878 girq
->parent_handler
= sgpio_irq_handler
;
879 girq
->num_parents
= 1;
880 girq
->parents
= devm_kcalloc(dev
, 1,
881 sizeof(*girq
->parents
),
885 girq
->parents
[0] = irq
;
886 girq
->default_type
= IRQ_TYPE_NONE
;
887 girq
->handler
= handle_bad_irq
;
889 /* Disable all individual pins */
890 for (i
= 0; i
< SGPIO_MAX_BITS
; i
++)
891 sgpio_writel(priv
, 0, REG_INT_ENABLE
, i
);
893 sgpio_clrsetbits(priv
, REG_SIO_CONFIG
, 0, 0, SGPIO_MASTER_INTR_ENA
);
897 ret
= devm_gpiochip_add_data(dev
, gc
, bank
);
899 dev_err(dev
, "Failed to register: ret %d\n", ret
);
904 static int microchip_sgpio_probe(struct platform_device
*pdev
)
906 int div_clock
= 0, ret
, port
, i
, nbanks
;
907 struct device
*dev
= &pdev
->dev
;
908 struct fwnode_handle
*fwnode
;
909 struct reset_control
*reset
;
910 struct sgpio_priv
*priv
;
913 struct regmap_config regmap_config
= {
919 priv
= devm_kzalloc(dev
, sizeof(*priv
), GFP_KERNEL
);
924 spin_lock_init(&priv
->lock
);
925 mutex_init(&priv
->poll_lock
);
927 reset
= devm_reset_control_get_optional_shared(&pdev
->dev
, "switch");
929 return dev_err_probe(dev
, PTR_ERR(reset
), "Failed to get reset\n");
930 reset_control_reset(reset
);
932 clk
= devm_clk_get(dev
, NULL
);
934 return dev_err_probe(dev
, PTR_ERR(clk
), "Failed to get clock\n");
936 div_clock
= clk_get_rate(clk
);
937 if (device_property_read_u32(dev
, "bus-frequency", &priv
->clock
))
938 priv
->clock
= 12500000;
939 if (priv
->clock
== 0 || priv
->clock
> (div_clock
/ 2)) {
940 dev_err(dev
, "Invalid frequency %d\n", priv
->clock
);
944 priv
->regs
= ocelot_regmap_from_resource(pdev
, 0, ®map_config
);
945 if (IS_ERR(priv
->regs
))
946 return PTR_ERR(priv
->regs
);
948 priv
->properties
= device_get_match_data(dev
);
949 priv
->in
.is_input
= true;
951 /* Get rest of device properties */
952 ret
= microchip_sgpio_get_ports(priv
);
956 nbanks
= device_get_child_node_count(dev
);
958 dev_err(dev
, "Must have 2 banks (have %d)\n", nbanks
);
963 device_for_each_child_node(dev
, fwnode
) {
964 ret
= microchip_sgpio_register_bank(dev
, priv
, fwnode
, i
++);
966 fwnode_handle_put(fwnode
);
971 if (priv
->in
.gpio
.ngpio
!= priv
->out
.gpio
.ngpio
) {
972 dev_err(dev
, "Banks must have same GPIO count\n");
976 sgpio_configure_bitstream(priv
);
978 val
= max(2U, div_clock
/ priv
->clock
);
979 sgpio_configure_clock(priv
, val
);
981 for (port
= 0; port
< SGPIO_BITS_PER_WORD
; port
++)
982 sgpio_writel(priv
, 0, REG_PORT_CONFIG
, port
);
983 sgpio_writel(priv
, priv
->ports
, REG_PORT_ENABLE
, 0);
988 static const struct of_device_id microchip_sgpio_gpio_of_match
[] = {
990 .compatible
= "microchip,sparx5-sgpio",
991 .data
= &properties_sparx5
,
993 .compatible
= "mscc,luton-sgpio",
994 .data
= &properties_luton
,
996 .compatible
= "mscc,ocelot-sgpio",
997 .data
= &properties_ocelot
,
1002 MODULE_DEVICE_TABLE(of
, microchip_sgpio_gpio_of_match
);
1004 static struct platform_driver microchip_sgpio_pinctrl_driver
= {
1006 .name
= "pinctrl-microchip-sgpio",
1007 .of_match_table
= microchip_sgpio_gpio_of_match
,
1008 .suppress_bind_attrs
= true,
1010 .probe
= microchip_sgpio_probe
,
1012 module_platform_driver(microchip_sgpio_pinctrl_driver
);
1014 MODULE_DESCRIPTION("Microchip SGPIO Pinctrl Driver");
1015 MODULE_LICENSE("GPL");