Get rid of 'remove_new' relic from platform driver struct
[linux.git] / arch / arm / common / sa1111.c
blob9846f30990f71122b20e04314ed522bb45069b35
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * linux/arch/arm/common/sa1111.c
5 * SA1111 support
7 * Original code by John Dorsey
9 * This file contains all generic SA1111 support.
11 * All initialization functions provided here are intended to be called
12 * from machine specific code with proper arguments when required.
14 #include <linux/module.h>
15 #include <linux/gpio/driver.h>
16 #include <linux/init.h>
17 #include <linux/irq.h>
18 #include <linux/kernel.h>
19 #include <linux/delay.h>
20 #include <linux/errno.h>
21 #include <linux/ioport.h>
22 #include <linux/platform_device.h>
23 #include <linux/slab.h>
24 #include <linux/spinlock.h>
25 #include <linux/dma-map-ops.h>
26 #include <linux/clk.h>
27 #include <linux/io.h>
29 #include <asm/mach/irq.h>
30 #include <asm/mach-types.h>
31 #include <linux/sizes.h>
33 #include <asm/hardware/sa1111.h>
35 #ifdef CONFIG_ARCH_SA1100
36 #include <mach/hardware.h>
37 #endif
39 /* SA1111 IRQs */
40 #define IRQ_GPAIN0 (0)
41 #define IRQ_GPAIN1 (1)
42 #define IRQ_GPAIN2 (2)
43 #define IRQ_GPAIN3 (3)
44 #define IRQ_GPBIN0 (4)
45 #define IRQ_GPBIN1 (5)
46 #define IRQ_GPBIN2 (6)
47 #define IRQ_GPBIN3 (7)
48 #define IRQ_GPBIN4 (8)
49 #define IRQ_GPBIN5 (9)
50 #define IRQ_GPCIN0 (10)
51 #define IRQ_GPCIN1 (11)
52 #define IRQ_GPCIN2 (12)
53 #define IRQ_GPCIN3 (13)
54 #define IRQ_GPCIN4 (14)
55 #define IRQ_GPCIN5 (15)
56 #define IRQ_GPCIN6 (16)
57 #define IRQ_GPCIN7 (17)
58 #define IRQ_MSTXINT (18)
59 #define IRQ_MSRXINT (19)
60 #define IRQ_MSSTOPERRINT (20)
61 #define IRQ_TPTXINT (21)
62 #define IRQ_TPRXINT (22)
63 #define IRQ_TPSTOPERRINT (23)
64 #define SSPXMTINT (24)
65 #define SSPRCVINT (25)
66 #define SSPROR (26)
67 #define AUDXMTDMADONEA (32)
68 #define AUDRCVDMADONEA (33)
69 #define AUDXMTDMADONEB (34)
70 #define AUDRCVDMADONEB (35)
71 #define AUDTFSR (36)
72 #define AUDRFSR (37)
73 #define AUDTUR (38)
74 #define AUDROR (39)
75 #define AUDDTS (40)
76 #define AUDRDD (41)
77 #define AUDSTO (42)
78 #define IRQ_USBPWR (43)
79 #define IRQ_HCIM (44)
80 #define IRQ_HCIBUFFACC (45)
81 #define IRQ_HCIRMTWKP (46)
82 #define IRQ_NHCIMFCIR (47)
83 #define IRQ_USB_PORT_RESUME (48)
84 #define IRQ_S0_READY_NINT (49)
85 #define IRQ_S1_READY_NINT (50)
86 #define IRQ_S0_CD_VALID (51)
87 #define IRQ_S1_CD_VALID (52)
88 #define IRQ_S0_BVD1_STSCHG (53)
89 #define IRQ_S1_BVD1_STSCHG (54)
90 #define SA1111_IRQ_NR (55)
92 extern void sa1110_mb_enable(void);
93 extern void sa1110_mb_disable(void);
96 * We keep the following data for the overall SA1111. Note that the
97 * struct device and struct resource are "fake"; they should be supplied
98 * by the bus above us. However, in the interests of getting all SA1111
99 * drivers converted over to the device model, we provide this as an
100 * anchor point for all the other drivers.
102 struct sa1111 {
103 struct device *dev;
104 struct clk *clk;
105 unsigned long phys;
106 int irq;
107 int irq_base; /* base for cascaded on-chip IRQs */
108 spinlock_t lock;
109 void __iomem *base;
110 struct sa1111_platform_data *pdata;
111 struct irq_domain *irqdomain;
112 struct gpio_chip gc;
113 #ifdef CONFIG_PM
114 void *saved_state;
115 #endif
119 * We _really_ need to eliminate this. Its only users
120 * are the PWM and DMA checking code.
122 static struct sa1111 *g_sa1111;
124 struct sa1111_dev_info {
125 unsigned long offset;
126 unsigned long skpcr_mask;
127 bool dma;
128 unsigned int devid;
129 unsigned int hwirq[6];
132 static struct sa1111_dev_info sa1111_devices[] = {
134 .offset = SA1111_USB,
135 .skpcr_mask = SKPCR_UCLKEN,
136 .dma = true,
137 .devid = SA1111_DEVID_USB,
138 .hwirq = {
139 IRQ_USBPWR,
140 IRQ_HCIM,
141 IRQ_HCIBUFFACC,
142 IRQ_HCIRMTWKP,
143 IRQ_NHCIMFCIR,
144 IRQ_USB_PORT_RESUME
148 .offset = 0x0600,
149 .skpcr_mask = SKPCR_I2SCLKEN | SKPCR_L3CLKEN,
150 .dma = true,
151 .devid = SA1111_DEVID_SAC,
152 .hwirq = {
153 AUDXMTDMADONEA,
154 AUDXMTDMADONEB,
155 AUDRCVDMADONEA,
156 AUDRCVDMADONEB
160 .offset = 0x0800,
161 .skpcr_mask = SKPCR_SCLKEN,
162 .devid = SA1111_DEVID_SSP,
165 .offset = SA1111_KBD,
166 .skpcr_mask = SKPCR_PTCLKEN,
167 .devid = SA1111_DEVID_PS2_KBD,
168 .hwirq = {
169 IRQ_TPRXINT,
170 IRQ_TPTXINT
174 .offset = SA1111_MSE,
175 .skpcr_mask = SKPCR_PMCLKEN,
176 .devid = SA1111_DEVID_PS2_MSE,
177 .hwirq = {
178 IRQ_MSRXINT,
179 IRQ_MSTXINT
183 .offset = 0x1800,
184 .skpcr_mask = 0,
185 .devid = SA1111_DEVID_PCMCIA,
186 .hwirq = {
187 IRQ_S0_READY_NINT,
188 IRQ_S0_CD_VALID,
189 IRQ_S0_BVD1_STSCHG,
190 IRQ_S1_READY_NINT,
191 IRQ_S1_CD_VALID,
192 IRQ_S1_BVD1_STSCHG,
197 static int sa1111_map_irq(struct sa1111 *sachip, irq_hw_number_t hwirq)
199 return irq_create_mapping(sachip->irqdomain, hwirq);
203 * SA1111 interrupt support. Since clearing an IRQ while there are
204 * active IRQs causes the interrupt output to pulse, the upper levels
205 * will call us again if there are more interrupts to process.
207 static void sa1111_irq_handler(struct irq_desc *desc)
209 unsigned int stat0, stat1, i;
210 struct sa1111 *sachip = irq_desc_get_handler_data(desc);
211 struct irq_domain *irqdomain;
212 void __iomem *mapbase = sachip->base + SA1111_INTC;
214 stat0 = readl_relaxed(mapbase + SA1111_INTSTATCLR0);
215 stat1 = readl_relaxed(mapbase + SA1111_INTSTATCLR1);
217 writel_relaxed(stat0, mapbase + SA1111_INTSTATCLR0);
219 desc->irq_data.chip->irq_ack(&desc->irq_data);
221 writel_relaxed(stat1, mapbase + SA1111_INTSTATCLR1);
223 if (stat0 == 0 && stat1 == 0) {
224 do_bad_IRQ(desc);
225 return;
228 irqdomain = sachip->irqdomain;
230 for (i = 0; stat0; i++, stat0 >>= 1)
231 if (stat0 & 1)
232 generic_handle_domain_irq(irqdomain, i);
234 for (i = 32; stat1; i++, stat1 >>= 1)
235 if (stat1 & 1)
236 generic_handle_domain_irq(irqdomain, i);
238 /* For level-based interrupts */
239 desc->irq_data.chip->irq_unmask(&desc->irq_data);
242 static u32 sa1111_irqmask(struct irq_data *d)
244 return BIT(irqd_to_hwirq(d) & 31);
247 static int sa1111_irqbank(struct irq_data *d)
249 return (irqd_to_hwirq(d) / 32) * 4;
252 static void sa1111_ack_irq(struct irq_data *d)
256 static void sa1111_mask_irq(struct irq_data *d)
258 struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
259 void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
260 u32 ie;
262 ie = readl_relaxed(mapbase + SA1111_INTEN0);
263 ie &= ~sa1111_irqmask(d);
264 writel(ie, mapbase + SA1111_INTEN0);
267 static void sa1111_unmask_irq(struct irq_data *d)
269 struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
270 void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
271 u32 ie;
273 ie = readl_relaxed(mapbase + SA1111_INTEN0);
274 ie |= sa1111_irqmask(d);
275 writel_relaxed(ie, mapbase + SA1111_INTEN0);
279 * Attempt to re-trigger the interrupt. The SA1111 contains a register
280 * (INTSET) which claims to do this. However, in practice no amount of
281 * manipulation of INTEN and INTSET guarantees that the interrupt will
282 * be triggered. In fact, its very difficult, if not impossible to get
283 * INTSET to re-trigger the interrupt.
285 static int sa1111_retrigger_irq(struct irq_data *d)
287 struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
288 void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
289 u32 ip, mask = sa1111_irqmask(d);
290 int i;
292 ip = readl_relaxed(mapbase + SA1111_INTPOL0);
293 for (i = 0; i < 8; i++) {
294 writel_relaxed(ip ^ mask, mapbase + SA1111_INTPOL0);
295 writel_relaxed(ip, mapbase + SA1111_INTPOL0);
296 if (readl_relaxed(mapbase + SA1111_INTSTATCLR0) & mask)
297 break;
300 if (i == 8) {
301 pr_err("Danger Will Robinson: failed to re-trigger IRQ%d\n",
302 d->irq);
303 return 0;
306 return 1;
309 static int sa1111_type_irq(struct irq_data *d, unsigned int flags)
311 struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
312 void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
313 u32 ip, mask = sa1111_irqmask(d);
315 if (flags == IRQ_TYPE_PROBE)
316 return 0;
318 if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0)
319 return -EINVAL;
321 ip = readl_relaxed(mapbase + SA1111_INTPOL0);
322 if (flags & IRQ_TYPE_EDGE_RISING)
323 ip &= ~mask;
324 else
325 ip |= mask;
326 writel_relaxed(ip, mapbase + SA1111_INTPOL0);
327 writel_relaxed(ip, mapbase + SA1111_WAKEPOL0);
329 return 0;
332 static int sa1111_wake_irq(struct irq_data *d, unsigned int on)
334 struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
335 void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
336 u32 we, mask = sa1111_irqmask(d);
338 we = readl_relaxed(mapbase + SA1111_WAKEEN0);
339 if (on)
340 we |= mask;
341 else
342 we &= ~mask;
343 writel_relaxed(we, mapbase + SA1111_WAKEEN0);
345 return 0;
348 static struct irq_chip sa1111_irq_chip = {
349 .name = "SA1111",
350 .irq_ack = sa1111_ack_irq,
351 .irq_mask = sa1111_mask_irq,
352 .irq_unmask = sa1111_unmask_irq,
353 .irq_retrigger = sa1111_retrigger_irq,
354 .irq_set_type = sa1111_type_irq,
355 .irq_set_wake = sa1111_wake_irq,
358 static int sa1111_irqdomain_map(struct irq_domain *d, unsigned int irq,
359 irq_hw_number_t hwirq)
361 struct sa1111 *sachip = d->host_data;
363 /* Disallow unavailable interrupts */
364 if (hwirq > SSPROR && hwirq < AUDXMTDMADONEA)
365 return -EINVAL;
367 irq_set_chip_data(irq, sachip);
368 irq_set_chip_and_handler(irq, &sa1111_irq_chip, handle_edge_irq);
369 irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
371 return 0;
374 static const struct irq_domain_ops sa1111_irqdomain_ops = {
375 .map = sa1111_irqdomain_map,
376 .xlate = irq_domain_xlate_twocell,
379 static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base)
381 void __iomem *irqbase = sachip->base + SA1111_INTC;
382 int ret;
385 * We're guaranteed that this region hasn't been taken.
387 request_mem_region(sachip->phys + SA1111_INTC, 512, "irq");
389 ret = irq_alloc_descs(-1, irq_base, SA1111_IRQ_NR, -1);
390 if (ret <= 0) {
391 dev_err(sachip->dev, "unable to allocate %u irqs: %d\n",
392 SA1111_IRQ_NR, ret);
393 if (ret == 0)
394 ret = -EINVAL;
395 return ret;
398 sachip->irq_base = ret;
400 /* disable all IRQs */
401 writel_relaxed(0, irqbase + SA1111_INTEN0);
402 writel_relaxed(0, irqbase + SA1111_INTEN1);
403 writel_relaxed(0, irqbase + SA1111_WAKEEN0);
404 writel_relaxed(0, irqbase + SA1111_WAKEEN1);
407 * detect on rising edge. Note: Feb 2001 Errata for SA1111
408 * specifies that S0ReadyInt and S1ReadyInt should be '1'.
410 writel_relaxed(0, irqbase + SA1111_INTPOL0);
411 writel_relaxed(BIT(IRQ_S0_READY_NINT & 31) |
412 BIT(IRQ_S1_READY_NINT & 31),
413 irqbase + SA1111_INTPOL1);
415 /* clear all IRQs */
416 writel_relaxed(~0, irqbase + SA1111_INTSTATCLR0);
417 writel_relaxed(~0, irqbase + SA1111_INTSTATCLR1);
419 sachip->irqdomain = irq_domain_add_linear(NULL, SA1111_IRQ_NR,
420 &sa1111_irqdomain_ops,
421 sachip);
422 if (!sachip->irqdomain) {
423 irq_free_descs(sachip->irq_base, SA1111_IRQ_NR);
424 return -ENOMEM;
427 irq_domain_associate_many(sachip->irqdomain,
428 sachip->irq_base + IRQ_GPAIN0,
429 IRQ_GPAIN0, SSPROR + 1 - IRQ_GPAIN0);
430 irq_domain_associate_many(sachip->irqdomain,
431 sachip->irq_base + AUDXMTDMADONEA,
432 AUDXMTDMADONEA,
433 IRQ_S1_BVD1_STSCHG + 1 - AUDXMTDMADONEA);
436 * Register SA1111 interrupt
438 irq_set_irq_type(sachip->irq, IRQ_TYPE_EDGE_RISING);
439 irq_set_chained_handler_and_data(sachip->irq, sa1111_irq_handler,
440 sachip);
442 dev_info(sachip->dev, "Providing IRQ%u-%u\n",
443 sachip->irq_base, sachip->irq_base + SA1111_IRQ_NR - 1);
445 return 0;
448 static void sa1111_remove_irq(struct sa1111 *sachip)
450 struct irq_domain *domain = sachip->irqdomain;
451 void __iomem *irqbase = sachip->base + SA1111_INTC;
452 int i;
454 /* disable all IRQs */
455 writel_relaxed(0, irqbase + SA1111_INTEN0);
456 writel_relaxed(0, irqbase + SA1111_INTEN1);
457 writel_relaxed(0, irqbase + SA1111_WAKEEN0);
458 writel_relaxed(0, irqbase + SA1111_WAKEEN1);
460 irq_set_chained_handler_and_data(sachip->irq, NULL, NULL);
461 for (i = 0; i < SA1111_IRQ_NR; i++)
462 irq_dispose_mapping(irq_find_mapping(domain, i));
463 irq_domain_remove(domain);
465 release_mem_region(sachip->phys + SA1111_INTC, 512);
468 enum {
469 SA1111_GPIO_PXDDR = (SA1111_GPIO_PADDR - SA1111_GPIO_PADDR),
470 SA1111_GPIO_PXDRR = (SA1111_GPIO_PADRR - SA1111_GPIO_PADDR),
471 SA1111_GPIO_PXDWR = (SA1111_GPIO_PADWR - SA1111_GPIO_PADDR),
472 SA1111_GPIO_PXSDR = (SA1111_GPIO_PASDR - SA1111_GPIO_PADDR),
473 SA1111_GPIO_PXSSR = (SA1111_GPIO_PASSR - SA1111_GPIO_PADDR),
476 static struct sa1111 *gc_to_sa1111(struct gpio_chip *gc)
478 return container_of(gc, struct sa1111, gc);
481 static void __iomem *sa1111_gpio_map_reg(struct sa1111 *sachip, unsigned offset)
483 void __iomem *reg = sachip->base + SA1111_GPIO;
485 if (offset < 4)
486 return reg + SA1111_GPIO_PADDR;
487 if (offset < 10)
488 return reg + SA1111_GPIO_PBDDR;
489 if (offset < 18)
490 return reg + SA1111_GPIO_PCDDR;
491 return NULL;
494 static u32 sa1111_gpio_map_bit(unsigned offset)
496 if (offset < 4)
497 return BIT(offset);
498 if (offset < 10)
499 return BIT(offset - 4);
500 if (offset < 18)
501 return BIT(offset - 10);
502 return 0;
505 static void sa1111_gpio_modify(void __iomem *reg, u32 mask, u32 set)
507 u32 val;
509 val = readl_relaxed(reg);
510 val &= ~mask;
511 val |= mask & set;
512 writel_relaxed(val, reg);
515 static int sa1111_gpio_get_direction(struct gpio_chip *gc, unsigned offset)
517 struct sa1111 *sachip = gc_to_sa1111(gc);
518 void __iomem *reg = sa1111_gpio_map_reg(sachip, offset);
519 u32 mask = sa1111_gpio_map_bit(offset);
521 return !!(readl_relaxed(reg + SA1111_GPIO_PXDDR) & mask);
524 static int sa1111_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
526 struct sa1111 *sachip = gc_to_sa1111(gc);
527 unsigned long flags;
528 void __iomem *reg = sa1111_gpio_map_reg(sachip, offset);
529 u32 mask = sa1111_gpio_map_bit(offset);
531 spin_lock_irqsave(&sachip->lock, flags);
532 sa1111_gpio_modify(reg + SA1111_GPIO_PXDDR, mask, mask);
533 sa1111_gpio_modify(reg + SA1111_GPIO_PXSDR, mask, mask);
534 spin_unlock_irqrestore(&sachip->lock, flags);
536 return 0;
539 static int sa1111_gpio_direction_output(struct gpio_chip *gc, unsigned offset,
540 int value)
542 struct sa1111 *sachip = gc_to_sa1111(gc);
543 unsigned long flags;
544 void __iomem *reg = sa1111_gpio_map_reg(sachip, offset);
545 u32 mask = sa1111_gpio_map_bit(offset);
547 spin_lock_irqsave(&sachip->lock, flags);
548 sa1111_gpio_modify(reg + SA1111_GPIO_PXDWR, mask, value ? mask : 0);
549 sa1111_gpio_modify(reg + SA1111_GPIO_PXSSR, mask, value ? mask : 0);
550 sa1111_gpio_modify(reg + SA1111_GPIO_PXDDR, mask, 0);
551 sa1111_gpio_modify(reg + SA1111_GPIO_PXSDR, mask, 0);
552 spin_unlock_irqrestore(&sachip->lock, flags);
554 return 0;
557 static int sa1111_gpio_get(struct gpio_chip *gc, unsigned offset)
559 struct sa1111 *sachip = gc_to_sa1111(gc);
560 void __iomem *reg = sa1111_gpio_map_reg(sachip, offset);
561 u32 mask = sa1111_gpio_map_bit(offset);
563 return !!(readl_relaxed(reg + SA1111_GPIO_PXDRR) & mask);
566 static void sa1111_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
568 struct sa1111 *sachip = gc_to_sa1111(gc);
569 unsigned long flags;
570 void __iomem *reg = sa1111_gpio_map_reg(sachip, offset);
571 u32 mask = sa1111_gpio_map_bit(offset);
573 spin_lock_irqsave(&sachip->lock, flags);
574 sa1111_gpio_modify(reg + SA1111_GPIO_PXDWR, mask, value ? mask : 0);
575 sa1111_gpio_modify(reg + SA1111_GPIO_PXSSR, mask, value ? mask : 0);
576 spin_unlock_irqrestore(&sachip->lock, flags);
579 static void sa1111_gpio_set_multiple(struct gpio_chip *gc, unsigned long *mask,
580 unsigned long *bits)
582 struct sa1111 *sachip = gc_to_sa1111(gc);
583 unsigned long flags;
584 void __iomem *reg = sachip->base + SA1111_GPIO;
585 u32 msk, val;
587 msk = *mask;
588 val = *bits;
590 spin_lock_irqsave(&sachip->lock, flags);
591 sa1111_gpio_modify(reg + SA1111_GPIO_PADWR, msk & 15, val);
592 sa1111_gpio_modify(reg + SA1111_GPIO_PASSR, msk & 15, val);
593 sa1111_gpio_modify(reg + SA1111_GPIO_PBDWR, (msk >> 4) & 255, val >> 4);
594 sa1111_gpio_modify(reg + SA1111_GPIO_PBSSR, (msk >> 4) & 255, val >> 4);
595 sa1111_gpio_modify(reg + SA1111_GPIO_PCDWR, (msk >> 12) & 255, val >> 12);
596 sa1111_gpio_modify(reg + SA1111_GPIO_PCSSR, (msk >> 12) & 255, val >> 12);
597 spin_unlock_irqrestore(&sachip->lock, flags);
600 static int sa1111_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
602 struct sa1111 *sachip = gc_to_sa1111(gc);
604 return sa1111_map_irq(sachip, offset);
607 static int sa1111_setup_gpios(struct sa1111 *sachip)
609 sachip->gc.label = "sa1111";
610 sachip->gc.parent = sachip->dev;
611 sachip->gc.owner = THIS_MODULE;
612 sachip->gc.get_direction = sa1111_gpio_get_direction;
613 sachip->gc.direction_input = sa1111_gpio_direction_input;
614 sachip->gc.direction_output = sa1111_gpio_direction_output;
615 sachip->gc.get = sa1111_gpio_get;
616 sachip->gc.set = sa1111_gpio_set;
617 sachip->gc.set_multiple = sa1111_gpio_set_multiple;
618 sachip->gc.to_irq = sa1111_gpio_to_irq;
619 sachip->gc.base = -1;
620 sachip->gc.ngpio = 18;
622 return devm_gpiochip_add_data(sachip->dev, &sachip->gc, sachip);
626 * Bring the SA1111 out of reset. This requires a set procedure:
627 * 1. nRESET asserted (by hardware)
628 * 2. CLK turned on from SA1110
629 * 3. nRESET deasserted
630 * 4. VCO turned on, PLL_BYPASS turned off
631 * 5. Wait lock time, then assert RCLKEn
632 * 7. PCR set to allow clocking of individual functions
634 * Until we've done this, the only registers we can access are:
635 * SBI_SKCR
636 * SBI_SMCR
637 * SBI_SKID
639 static void sa1111_wake(struct sa1111 *sachip)
641 unsigned long flags, r;
643 spin_lock_irqsave(&sachip->lock, flags);
645 clk_enable(sachip->clk);
648 * Turn VCO on, and disable PLL Bypass.
650 r = readl_relaxed(sachip->base + SA1111_SKCR);
651 r &= ~SKCR_VCO_OFF;
652 writel_relaxed(r, sachip->base + SA1111_SKCR);
653 r |= SKCR_PLL_BYPASS | SKCR_OE_EN;
654 writel_relaxed(r, sachip->base + SA1111_SKCR);
657 * Wait lock time. SA1111 manual _doesn't_
658 * specify a figure for this! We choose 100us.
660 udelay(100);
663 * Enable RCLK. We also ensure that RDYEN is set.
665 r |= SKCR_RCLKEN | SKCR_RDYEN;
666 writel_relaxed(r, sachip->base + SA1111_SKCR);
669 * Wait 14 RCLK cycles for the chip to finish coming out
670 * of reset. (RCLK=24MHz). This is 590ns.
672 udelay(1);
675 * Ensure all clocks are initially off.
677 writel_relaxed(0, sachip->base + SA1111_SKPCR);
679 spin_unlock_irqrestore(&sachip->lock, flags);
682 #ifdef CONFIG_ARCH_SA1100
684 static u32 sa1111_dma_mask[] = {
686 ~(1 << 20),
687 ~(1 << 23),
688 ~(1 << 24),
689 ~(1 << 25),
690 ~(1 << 20),
691 ~(1 << 20),
696 * Configure the SA1111 shared memory controller.
698 static void
699 sa1111_configure_smc(struct sa1111 *sachip, int sdram, unsigned int drac,
700 unsigned int cas_latency)
702 unsigned int smcr = SMCR_DTIM | SMCR_MBGE | FInsrt(drac, SMCR_DRAC);
704 if (cas_latency == 3)
705 smcr |= SMCR_CLAT;
707 writel_relaxed(smcr, sachip->base + SA1111_SMCR);
710 * Now clear the bits in the DMA mask to work around the SA1111
711 * DMA erratum (Intel StrongARM SA-1111 Microprocessor Companion
712 * Chip Specification Update, June 2000, Erratum #7).
714 if (sachip->dev->dma_mask)
715 *sachip->dev->dma_mask &= sa1111_dma_mask[drac >> 2];
717 sachip->dev->coherent_dma_mask &= sa1111_dma_mask[drac >> 2];
719 #endif
721 static void sa1111_dev_release(struct device *_dev)
723 struct sa1111_dev *dev = to_sa1111_device(_dev);
725 kfree(dev);
728 static int
729 sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
730 struct sa1111_dev_info *info)
732 struct sa1111_dev *dev;
733 unsigned i;
734 int ret;
736 dev = kzalloc(sizeof(struct sa1111_dev), GFP_KERNEL);
737 if (!dev) {
738 ret = -ENOMEM;
739 goto err_alloc;
742 device_initialize(&dev->dev);
743 dev_set_name(&dev->dev, "%4.4lx", info->offset);
744 dev->devid = info->devid;
745 dev->dev.parent = sachip->dev;
746 dev->dev.bus = &sa1111_bus_type;
747 dev->dev.release = sa1111_dev_release;
748 dev->res.start = sachip->phys + info->offset;
749 dev->res.end = dev->res.start + 511;
750 dev->res.name = dev_name(&dev->dev);
751 dev->res.flags = IORESOURCE_MEM;
752 dev->mapbase = sachip->base + info->offset;
753 dev->skpcr_mask = info->skpcr_mask;
755 for (i = 0; i < ARRAY_SIZE(info->hwirq); i++)
756 dev->hwirq[i] = info->hwirq[i];
759 * If the parent device has a DMA mask associated with it, and
760 * this child supports DMA, propagate it down to the children.
762 if (info->dma && sachip->dev->dma_mask) {
763 dev->dma_mask = *sachip->dev->dma_mask;
764 dev->dev.dma_mask = &dev->dma_mask;
765 dev->dev.coherent_dma_mask = sachip->dev->coherent_dma_mask;
768 ret = request_resource(parent, &dev->res);
769 if (ret) {
770 dev_err(sachip->dev, "failed to allocate resource for %s\n",
771 dev->res.name);
772 goto err_resource;
775 ret = device_add(&dev->dev);
776 if (ret)
777 goto err_add;
778 return 0;
780 err_add:
781 release_resource(&dev->res);
782 err_resource:
783 put_device(&dev->dev);
784 err_alloc:
785 return ret;
788 static int __sa1111_probe(struct device *me, struct resource *mem, int irq)
790 struct sa1111_platform_data *pd = me->platform_data;
791 struct sa1111 *sachip;
792 unsigned long id;
793 unsigned int has_devs;
794 int i, ret = -ENODEV;
796 if (!pd)
797 return -EINVAL;
799 sachip = devm_kzalloc(me, sizeof(struct sa1111), GFP_KERNEL);
800 if (!sachip)
801 return -ENOMEM;
803 sachip->clk = devm_clk_get(me, "SA1111_CLK");
804 if (IS_ERR(sachip->clk))
805 return PTR_ERR(sachip->clk);
807 ret = clk_prepare(sachip->clk);
808 if (ret)
809 return ret;
811 spin_lock_init(&sachip->lock);
813 sachip->dev = me;
814 dev_set_drvdata(sachip->dev, sachip);
816 sachip->pdata = pd;
817 sachip->phys = mem->start;
818 sachip->irq = irq;
821 * Map the whole region. This also maps the
822 * registers for our children.
824 sachip->base = ioremap(mem->start, PAGE_SIZE * 2);
825 if (!sachip->base) {
826 ret = -ENOMEM;
827 goto err_clk_unprep;
831 * Probe for the chip. Only touch the SBI registers.
833 id = readl_relaxed(sachip->base + SA1111_SKID);
834 if ((id & SKID_ID_MASK) != SKID_SA1111_ID) {
835 printk(KERN_DEBUG "SA1111 not detected: ID = %08lx\n", id);
836 ret = -ENODEV;
837 goto err_unmap;
840 pr_info("SA1111 Microprocessor Companion Chip: silicon revision %lx, metal revision %lx\n",
841 (id & SKID_SIREV_MASK) >> 4, id & SKID_MTREV_MASK);
844 * We found it. Wake the chip up, and initialise.
846 sa1111_wake(sachip);
849 * The interrupt controller must be initialised before any
850 * other device to ensure that the interrupts are available.
852 ret = sa1111_setup_irq(sachip, pd->irq_base);
853 if (ret)
854 goto err_clk;
856 /* Setup the GPIOs - should really be done after the IRQ setup */
857 ret = sa1111_setup_gpios(sachip);
858 if (ret)
859 goto err_irq;
861 #ifdef CONFIG_ARCH_SA1100
863 unsigned int val;
866 * The SDRAM configuration of the SA1110 and the SA1111 must
867 * match. This is very important to ensure that SA1111 accesses
868 * don't corrupt the SDRAM. Note that this ungates the SA1111's
869 * MBGNT signal, so we must have called sa1110_mb_disable()
870 * beforehand.
872 sa1111_configure_smc(sachip, 1,
873 FExtr(MDCNFG, MDCNFG_SA1110_DRAC0),
874 FExtr(MDCNFG, MDCNFG_SA1110_TDL0));
877 * We only need to turn on DCLK whenever we want to use the
878 * DMA. It can otherwise be held firmly in the off position.
879 * (currently, we always enable it.)
881 val = readl_relaxed(sachip->base + SA1111_SKPCR);
882 writel_relaxed(val | SKPCR_DCLKEN, sachip->base + SA1111_SKPCR);
885 * Enable the SA1110 memory bus request and grant signals.
887 sa1110_mb_enable();
889 #endif
891 g_sa1111 = sachip;
893 has_devs = ~0;
894 if (pd)
895 has_devs &= ~pd->disable_devs;
897 for (i = 0; i < ARRAY_SIZE(sa1111_devices); i++)
898 if (sa1111_devices[i].devid & has_devs)
899 sa1111_init_one_child(sachip, mem, &sa1111_devices[i]);
901 return 0;
903 err_irq:
904 sa1111_remove_irq(sachip);
905 err_clk:
906 clk_disable(sachip->clk);
907 err_unmap:
908 iounmap(sachip->base);
909 err_clk_unprep:
910 clk_unprepare(sachip->clk);
911 return ret;
914 static int sa1111_remove_one(struct device *dev, void *data)
916 struct sa1111_dev *sadev = to_sa1111_device(dev);
917 if (dev->bus != &sa1111_bus_type)
918 return 0;
919 device_del(&sadev->dev);
920 release_resource(&sadev->res);
921 put_device(&sadev->dev);
922 return 0;
925 static void __sa1111_remove(struct sa1111 *sachip)
927 device_for_each_child(sachip->dev, NULL, sa1111_remove_one);
929 sa1111_remove_irq(sachip);
931 clk_disable(sachip->clk);
932 clk_unprepare(sachip->clk);
934 iounmap(sachip->base);
937 struct sa1111_save_data {
938 unsigned int skcr;
939 unsigned int skpcr;
940 unsigned int skcdr;
941 unsigned char skaud;
942 unsigned char skpwm0;
943 unsigned char skpwm1;
946 * Interrupt controller
948 unsigned int intpol0;
949 unsigned int intpol1;
950 unsigned int inten0;
951 unsigned int inten1;
952 unsigned int wakepol0;
953 unsigned int wakepol1;
954 unsigned int wakeen0;
955 unsigned int wakeen1;
958 #ifdef CONFIG_PM
960 static int sa1111_suspend_noirq(struct device *dev)
962 struct sa1111 *sachip = dev_get_drvdata(dev);
963 struct sa1111_save_data *save;
964 unsigned long flags;
965 unsigned int val;
966 void __iomem *base;
968 save = kmalloc(sizeof(struct sa1111_save_data), GFP_KERNEL);
969 if (!save)
970 return -ENOMEM;
971 sachip->saved_state = save;
973 spin_lock_irqsave(&sachip->lock, flags);
976 * Save state.
978 base = sachip->base;
979 save->skcr = readl_relaxed(base + SA1111_SKCR);
980 save->skpcr = readl_relaxed(base + SA1111_SKPCR);
981 save->skcdr = readl_relaxed(base + SA1111_SKCDR);
982 save->skaud = readl_relaxed(base + SA1111_SKAUD);
983 save->skpwm0 = readl_relaxed(base + SA1111_SKPWM0);
984 save->skpwm1 = readl_relaxed(base + SA1111_SKPWM1);
986 writel_relaxed(0, sachip->base + SA1111_SKPWM0);
987 writel_relaxed(0, sachip->base + SA1111_SKPWM1);
989 base = sachip->base + SA1111_INTC;
990 save->intpol0 = readl_relaxed(base + SA1111_INTPOL0);
991 save->intpol1 = readl_relaxed(base + SA1111_INTPOL1);
992 save->inten0 = readl_relaxed(base + SA1111_INTEN0);
993 save->inten1 = readl_relaxed(base + SA1111_INTEN1);
994 save->wakepol0 = readl_relaxed(base + SA1111_WAKEPOL0);
995 save->wakepol1 = readl_relaxed(base + SA1111_WAKEPOL1);
996 save->wakeen0 = readl_relaxed(base + SA1111_WAKEEN0);
997 save->wakeen1 = readl_relaxed(base + SA1111_WAKEEN1);
1000 * Disable.
1002 val = readl_relaxed(sachip->base + SA1111_SKCR);
1003 writel_relaxed(val | SKCR_SLEEP, sachip->base + SA1111_SKCR);
1005 clk_disable(sachip->clk);
1007 spin_unlock_irqrestore(&sachip->lock, flags);
1009 #ifdef CONFIG_ARCH_SA1100
1010 sa1110_mb_disable();
1011 #endif
1013 return 0;
1017 * sa1111_resume - Restore the SA1111 device state.
1018 * @dev: device to restore
1020 * Restore the general state of the SA1111; clock control and
1021 * interrupt controller. Other parts of the SA1111 must be
1022 * restored by their respective drivers, and must be called
1023 * via LDM after this function.
1025 static int sa1111_resume_noirq(struct device *dev)
1027 struct sa1111 *sachip = dev_get_drvdata(dev);
1028 struct sa1111_save_data *save;
1029 unsigned long flags, id;
1030 void __iomem *base;
1032 save = sachip->saved_state;
1033 if (!save)
1034 return 0;
1037 * Ensure that the SA1111 is still here.
1038 * FIXME: shouldn't do this here.
1040 id = readl_relaxed(sachip->base + SA1111_SKID);
1041 if ((id & SKID_ID_MASK) != SKID_SA1111_ID) {
1042 __sa1111_remove(sachip);
1043 dev_set_drvdata(dev, NULL);
1044 kfree(save);
1045 return 0;
1049 * First of all, wake up the chip.
1051 sa1111_wake(sachip);
1053 #ifdef CONFIG_ARCH_SA1100
1054 /* Enable the memory bus request/grant signals */
1055 sa1110_mb_enable();
1056 #endif
1059 * Only lock for write ops. Also, sa1111_wake must be called with
1060 * released spinlock!
1062 spin_lock_irqsave(&sachip->lock, flags);
1064 writel_relaxed(0, sachip->base + SA1111_INTC + SA1111_INTEN0);
1065 writel_relaxed(0, sachip->base + SA1111_INTC + SA1111_INTEN1);
1067 base = sachip->base;
1068 writel_relaxed(save->skcr, base + SA1111_SKCR);
1069 writel_relaxed(save->skpcr, base + SA1111_SKPCR);
1070 writel_relaxed(save->skcdr, base + SA1111_SKCDR);
1071 writel_relaxed(save->skaud, base + SA1111_SKAUD);
1072 writel_relaxed(save->skpwm0, base + SA1111_SKPWM0);
1073 writel_relaxed(save->skpwm1, base + SA1111_SKPWM1);
1075 base = sachip->base + SA1111_INTC;
1076 writel_relaxed(save->intpol0, base + SA1111_INTPOL0);
1077 writel_relaxed(save->intpol1, base + SA1111_INTPOL1);
1078 writel_relaxed(save->inten0, base + SA1111_INTEN0);
1079 writel_relaxed(save->inten1, base + SA1111_INTEN1);
1080 writel_relaxed(save->wakepol0, base + SA1111_WAKEPOL0);
1081 writel_relaxed(save->wakepol1, base + SA1111_WAKEPOL1);
1082 writel_relaxed(save->wakeen0, base + SA1111_WAKEEN0);
1083 writel_relaxed(save->wakeen1, base + SA1111_WAKEEN1);
1085 spin_unlock_irqrestore(&sachip->lock, flags);
1087 sachip->saved_state = NULL;
1088 kfree(save);
1090 return 0;
1093 #else
1094 #define sa1111_suspend_noirq NULL
1095 #define sa1111_resume_noirq NULL
1096 #endif
1099 * sa1111_probe - probe for a single SA1111 chip.
1100 * @pdev: platform device.
1102 * Probe for a SA1111 chip. This must be called
1103 * before any other SA1111-specific code.
1105 * Returns:
1106 * * %-ENODEV - device not found.
1107 * * %-ENOMEM - memory allocation failure.
1108 * * %-EBUSY - physical address already marked in-use.
1109 * * %-EINVAL - no platform data passed
1110 * * %0 - successful.
1112 static int sa1111_probe(struct platform_device *pdev)
1114 struct resource *mem;
1115 int irq;
1117 mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1118 if (!mem)
1119 return -EINVAL;
1120 irq = platform_get_irq(pdev, 0);
1121 if (irq < 0)
1122 return irq;
1124 return __sa1111_probe(&pdev->dev, mem, irq);
1127 static void sa1111_remove(struct platform_device *pdev)
1129 struct sa1111 *sachip = platform_get_drvdata(pdev);
1131 if (sachip) {
1132 #ifdef CONFIG_PM
1133 kfree(sachip->saved_state);
1134 sachip->saved_state = NULL;
1135 #endif
1136 __sa1111_remove(sachip);
1137 platform_set_drvdata(pdev, NULL);
1141 static struct dev_pm_ops sa1111_pm_ops = {
1142 .suspend_noirq = sa1111_suspend_noirq,
1143 .resume_noirq = sa1111_resume_noirq,
1147 * Not sure if this should be on the system bus or not yet.
1148 * We really want some way to register a system device at
1149 * the per-machine level, and then have this driver pick
1150 * up the registered devices.
1152 * We also need to handle the SDRAM configuration for
1153 * PXA250/SA1110 machine classes.
1155 static struct platform_driver sa1111_device_driver = {
1156 .probe = sa1111_probe,
1157 .remove = sa1111_remove,
1158 .driver = {
1159 .name = "sa1111",
1160 .pm = &sa1111_pm_ops,
1165 * Get the parent device driver (us) structure
1166 * from a child function device
1168 static inline struct sa1111 *sa1111_chip_driver(struct sa1111_dev *sadev)
1170 return (struct sa1111 *)dev_get_drvdata(sadev->dev.parent);
1174 * The bits in the opdiv field are non-linear.
1176 static unsigned char opdiv_table[] = { 1, 4, 2, 8 };
1178 static unsigned int __sa1111_pll_clock(struct sa1111 *sachip)
1180 unsigned int skcdr, fbdiv, ipdiv, opdiv;
1182 skcdr = readl_relaxed(sachip->base + SA1111_SKCDR);
1184 fbdiv = (skcdr & 0x007f) + 2;
1185 ipdiv = ((skcdr & 0x0f80) >> 7) + 2;
1186 opdiv = opdiv_table[(skcdr & 0x3000) >> 12];
1188 return 3686400 * fbdiv / (ipdiv * opdiv);
1192 * sa1111_pll_clock - return the current PLL clock frequency.
1193 * @sadev: SA1111 function block
1195 * BUG: we should look at SKCR. We also blindly believe that
1196 * the chip is being fed with the 3.6864MHz clock.
1198 * Returns the PLL clock in Hz.
1200 unsigned int sa1111_pll_clock(struct sa1111_dev *sadev)
1202 struct sa1111 *sachip = sa1111_chip_driver(sadev);
1204 return __sa1111_pll_clock(sachip);
1206 EXPORT_SYMBOL(sa1111_pll_clock);
1209 * sa1111_select_audio_mode - select I2S or AC link mode
1210 * @sadev: SA1111 function block
1211 * @mode: One of %SA1111_AUDIO_ACLINK or %SA1111_AUDIO_I2S
1213 * Frob the SKCR to select AC Link mode or I2S mode for
1214 * the audio block.
1216 void sa1111_select_audio_mode(struct sa1111_dev *sadev, int mode)
1218 struct sa1111 *sachip = sa1111_chip_driver(sadev);
1219 unsigned long flags;
1220 unsigned int val;
1222 spin_lock_irqsave(&sachip->lock, flags);
1224 val = readl_relaxed(sachip->base + SA1111_SKCR);
1225 if (mode == SA1111_AUDIO_I2S) {
1226 val &= ~SKCR_SELAC;
1227 } else {
1228 val |= SKCR_SELAC;
1230 writel_relaxed(val, sachip->base + SA1111_SKCR);
1232 spin_unlock_irqrestore(&sachip->lock, flags);
1234 EXPORT_SYMBOL(sa1111_select_audio_mode);
1237 * sa1111_set_audio_rate - set the audio sample rate
1238 * @sadev: SA1111 SAC function block
1239 * @rate: sample rate to select
1241 int sa1111_set_audio_rate(struct sa1111_dev *sadev, int rate)
1243 struct sa1111 *sachip = sa1111_chip_driver(sadev);
1244 unsigned int div;
1246 if (sadev->devid != SA1111_DEVID_SAC)
1247 return -EINVAL;
1249 div = (__sa1111_pll_clock(sachip) / 256 + rate / 2) / rate;
1250 if (div == 0)
1251 div = 1;
1252 if (div > 128)
1253 div = 128;
1255 writel_relaxed(div - 1, sachip->base + SA1111_SKAUD);
1257 return 0;
1259 EXPORT_SYMBOL(sa1111_set_audio_rate);
1262 * sa1111_get_audio_rate - get the audio sample rate
1263 * @sadev: SA1111 SAC function block device
1265 int sa1111_get_audio_rate(struct sa1111_dev *sadev)
1267 struct sa1111 *sachip = sa1111_chip_driver(sadev);
1268 unsigned long div;
1270 if (sadev->devid != SA1111_DEVID_SAC)
1271 return -EINVAL;
1273 div = readl_relaxed(sachip->base + SA1111_SKAUD) + 1;
1275 return __sa1111_pll_clock(sachip) / (256 * div);
1277 EXPORT_SYMBOL(sa1111_get_audio_rate);
1280 * Individual device operations.
1284 * sa1111_enable_device - enable an on-chip SA1111 function block
1285 * @sadev: SA1111 function block device to enable
1287 int sa1111_enable_device(struct sa1111_dev *sadev)
1289 struct sa1111 *sachip = sa1111_chip_driver(sadev);
1290 unsigned long flags;
1291 unsigned int val;
1292 int ret = 0;
1294 if (sachip->pdata && sachip->pdata->enable)
1295 ret = sachip->pdata->enable(sachip->pdata->data, sadev->devid);
1297 if (ret == 0) {
1298 spin_lock_irqsave(&sachip->lock, flags);
1299 val = readl_relaxed(sachip->base + SA1111_SKPCR);
1300 writel_relaxed(val | sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
1301 spin_unlock_irqrestore(&sachip->lock, flags);
1303 return ret;
1305 EXPORT_SYMBOL(sa1111_enable_device);
1308 * sa1111_disable_device - disable an on-chip SA1111 function block
1309 * @sadev: SA1111 function block device to disable
1311 void sa1111_disable_device(struct sa1111_dev *sadev)
1313 struct sa1111 *sachip = sa1111_chip_driver(sadev);
1314 unsigned long flags;
1315 unsigned int val;
1317 spin_lock_irqsave(&sachip->lock, flags);
1318 val = readl_relaxed(sachip->base + SA1111_SKPCR);
1319 writel_relaxed(val & ~sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
1320 spin_unlock_irqrestore(&sachip->lock, flags);
1322 if (sachip->pdata && sachip->pdata->disable)
1323 sachip->pdata->disable(sachip->pdata->data, sadev->devid);
1325 EXPORT_SYMBOL(sa1111_disable_device);
1327 int sa1111_get_irq(struct sa1111_dev *sadev, unsigned num)
1329 struct sa1111 *sachip = sa1111_chip_driver(sadev);
1330 if (num >= ARRAY_SIZE(sadev->hwirq))
1331 return -EINVAL;
1332 return sa1111_map_irq(sachip, sadev->hwirq[num]);
1334 EXPORT_SYMBOL_GPL(sa1111_get_irq);
1337 * SA1111 "Register Access Bus."
1339 * We model this as a regular bus type, and hang devices directly
1340 * off this.
1342 static int sa1111_match(struct device *_dev, const struct device_driver *_drv)
1344 struct sa1111_dev *dev = to_sa1111_device(_dev);
1345 const struct sa1111_driver *drv = SA1111_DRV(_drv);
1347 return !!(dev->devid & drv->devid);
1350 static int sa1111_bus_probe(struct device *dev)
1352 struct sa1111_dev *sadev = to_sa1111_device(dev);
1353 struct sa1111_driver *drv = SA1111_DRV(dev->driver);
1354 int ret = -ENODEV;
1356 if (drv->probe)
1357 ret = drv->probe(sadev);
1358 return ret;
1361 static void sa1111_bus_remove(struct device *dev)
1363 struct sa1111_dev *sadev = to_sa1111_device(dev);
1364 struct sa1111_driver *drv = SA1111_DRV(dev->driver);
1366 if (drv->remove)
1367 drv->remove(sadev);
1370 struct bus_type sa1111_bus_type = {
1371 .name = "sa1111-rab",
1372 .match = sa1111_match,
1373 .probe = sa1111_bus_probe,
1374 .remove = sa1111_bus_remove,
1376 EXPORT_SYMBOL(sa1111_bus_type);
1378 int sa1111_driver_register(struct sa1111_driver *driver)
1380 driver->drv.bus = &sa1111_bus_type;
1381 return driver_register(&driver->drv);
1383 EXPORT_SYMBOL(sa1111_driver_register);
1385 void sa1111_driver_unregister(struct sa1111_driver *driver)
1387 driver_unregister(&driver->drv);
1389 EXPORT_SYMBOL(sa1111_driver_unregister);
1391 static int __init sa1111_init(void)
1393 int ret = bus_register(&sa1111_bus_type);
1394 if (ret == 0)
1395 platform_driver_register(&sa1111_device_driver);
1396 return ret;
1399 static void __exit sa1111_exit(void)
1401 platform_driver_unregister(&sa1111_device_driver);
1402 bus_unregister(&sa1111_bus_type);
1405 subsys_initcall(sa1111_init);
1406 module_exit(sa1111_exit);
1408 MODULE_DESCRIPTION("Intel Corporation SA1111 core driver");
1409 MODULE_LICENSE("GPL");