arch/powerpc/sysdev/qe_lib/ucc.c

   1 /*
   2  * arch/powerpc/sysdev/qe_lib/ucc.c
   3  *
   4  * QE UCC API Set - UCC specific routines implementations.
   5  *
   6  * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
   7  *
   8  * Authors:     Shlomi Gridish <gridish@freescale.com>
   9  *              Li Yang <leoli@freescale.com>
  10  *
  11  * This program is free software; you can redistribute  it and/or modify it
  12  * under  the terms of  the GNU General  Public License as published by the
  13  * Free Software Foundation;  either version 2 of the  License, or (at your
  14  * option) any later version.
  15  */
  16 #include <linux/kernel.h>
  17 #include <linux/errno.h>
  18 #include <linux/stddef.h>
  19 #include <linux/spinlock.h>
  20 #include <linux/export.h>
  21
  22 #include <asm/irq.h>
  23 #include <asm/io.h>
  24 #include <asm/immap_qe.h>
  25 #include <asm/qe.h>
  26 #include <asm/ucc.h>
  27
  28 int ucc_set_qe_mux_mii_mng(unsigned int ucc_num)
  29 {
  30         unsigned long flags;
  31
  32         if (ucc_num > UCC_MAX_NUM - 1)
  33                 return -EINVAL;
  34
  35         spin_lock_irqsave(&cmxgcr_lock, flags);
  36         clrsetbits_be32(&qe_immr->qmx.cmxgcr, QE_CMXGCR_MII_ENET_MNG,
  37                 ucc_num << QE_CMXGCR_MII_ENET_MNG_SHIFT);
  38         spin_unlock_irqrestore(&cmxgcr_lock, flags);
  39
  40         return 0;
  41 }
  42 EXPORT_SYMBOL(ucc_set_qe_mux_mii_mng);
  43
  44 /* Configure the UCC to either Slow or Fast.
  45  *
  46  * A given UCC can be figured to support either "slow" devices (e.g. UART)
  47  * or "fast" devices (e.g. Ethernet).
  48  *
  49  * 'ucc_num' is the UCC number, from 0 - 7.
  50  *
  51  * This function also sets the UCC_GUEMR_SET_RESERVED3 bit because that bit
  52  * must always be set to 1.
  53  */
  54 int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed)
  55 {
  56         u8 __iomem *guemr;
  57
  58         /* The GUEMR register is at the same location for both slow and fast
  59            devices, so we just use uccX.slow.guemr. */
  60         switch (ucc_num) {
  61         case 0: guemr = &qe_immr->ucc1.slow.guemr;
  62                 break;
  63         case 1: guemr = &qe_immr->ucc2.slow.guemr;
  64                 break;
  65         case 2: guemr = &qe_immr->ucc3.slow.guemr;
  66                 break;
  67         case 3: guemr = &qe_immr->ucc4.slow.guemr;
  68                 break;
  69         case 4: guemr = &qe_immr->ucc5.slow.guemr;
  70                 break;
  71         case 5: guemr = &qe_immr->ucc6.slow.guemr;
  72                 break;
  73         case 6: guemr = &qe_immr->ucc7.slow.guemr;
  74                 break;
  75         case 7: guemr = &qe_immr->ucc8.slow.guemr;
  76                 break;
  77         default:
  78                 return -EINVAL;
  79         }
  80
  81         clrsetbits_8(guemr, UCC_GUEMR_MODE_MASK,
  82                 UCC_GUEMR_SET_RESERVED3 | speed);
  83
  84         return 0;
  85 }
  86
  87 static void get_cmxucr_reg(unsigned int ucc_num, __be32 __iomem **cmxucr,
  88         unsigned int *reg_num, unsigned int *shift)
  89 {
  90         unsigned int cmx = ((ucc_num & 1) << 1) + (ucc_num > 3);
  91
  92         *reg_num = cmx + 1;
  93         *cmxucr = &qe_immr->qmx.cmxucr[cmx];
  94         *shift = 16 - 8 * (ucc_num & 2);
  95 }
  96
  97 int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask)
  98 {
  99         __be32 __iomem *cmxucr;
 100         unsigned int reg_num;
 101         unsigned int shift;
 102
 103         /* check if the UCC number is in range. */
 104         if (ucc_num > UCC_MAX_NUM - 1)
 105                 return -EINVAL;
 106
 107         get_cmxucr_reg(ucc_num, &cmxucr, &reg_num, &shift);
 108
 109         if (set)
 110                 setbits32(cmxucr, mask << shift);
 111         else
 112                 clrbits32(cmxucr, mask << shift);
 113
 114         return 0;
 115 }
 116
 117 int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock,
 118         enum comm_dir mode)
 119 {
 120         __be32 __iomem *cmxucr;
 121         unsigned int reg_num;
 122         unsigned int shift;
 123         u32 clock_bits = 0;
 124
 125         /* check if the UCC number is in range. */
 126         if (ucc_num > UCC_MAX_NUM - 1)
 127                 return -EINVAL;
 128
 129         /* The communications direction must be RX or TX */
 130         if (!((mode == COMM_DIR_RX) || (mode == COMM_DIR_TX)))
 131                 return -EINVAL;
 132
 133         get_cmxucr_reg(ucc_num, &cmxucr, &reg_num, &shift);
 134
 135         switch (reg_num) {
 136         case 1:
 137                 switch (clock) {
 138                 case QE_BRG1:   clock_bits = 1; break;
 139                 case QE_BRG2:   clock_bits = 2; break;
 140                 case QE_BRG7:   clock_bits = 3; break;
 141                 case QE_BRG8:   clock_bits = 4; break;
 142                 case QE_CLK9:   clock_bits = 5; break;
 143                 case QE_CLK10:  clock_bits = 6; break;
 144                 case QE_CLK11:  clock_bits = 7; break;
 145                 case QE_CLK12:  clock_bits = 8; break;
 146                 case QE_CLK15:  clock_bits = 9; break;
 147                 case QE_CLK16:  clock_bits = 10; break;
 148                 default: break;
 149                 }
 150                 break;
 151         case 2:
 152                 switch (clock) {
 153                 case QE_BRG5:   clock_bits = 1; break;
 154                 case QE_BRG6:   clock_bits = 2; break;
 155                 case QE_BRG7:   clock_bits = 3; break;
 156                 case QE_BRG8:   clock_bits = 4; break;
 157                 case QE_CLK13:  clock_bits = 5; break;
 158                 case QE_CLK14:  clock_bits = 6; break;
 159                 case QE_CLK19:  clock_bits = 7; break;
 160                 case QE_CLK20:  clock_bits = 8; break;
 161                 case QE_CLK15:  clock_bits = 9; break;
 162                 case QE_CLK16:  clock_bits = 10; break;
 163                 default: break;
 164                 }
 165                 break;
 166         case 3:
 167                 switch (clock) {
 168                 case QE_BRG9:   clock_bits = 1; break;
 169                 case QE_BRG10:  clock_bits = 2; break;
 170                 case QE_BRG15:  clock_bits = 3; break;
 171                 case QE_BRG16:  clock_bits = 4; break;
 172                 case QE_CLK3:   clock_bits = 5; break;
 173                 case QE_CLK4:   clock_bits = 6; break;
 174                 case QE_CLK17:  clock_bits = 7; break;
 175                 case QE_CLK18:  clock_bits = 8; break;
 176                 case QE_CLK7:   clock_bits = 9; break;
 177                 case QE_CLK8:   clock_bits = 10; break;
 178                 case QE_CLK16:  clock_bits = 11; break;
 179                 default: break;
 180                 }
 181                 break;
 182         case 4:
 183                 switch (clock) {
 184                 case QE_BRG13:  clock_bits = 1; break;
 185                 case QE_BRG14:  clock_bits = 2; break;
 186                 case QE_BRG15:  clock_bits = 3; break;
 187                 case QE_BRG16:  clock_bits = 4; break;
 188                 case QE_CLK5:   clock_bits = 5; break;
 189                 case QE_CLK6:   clock_bits = 6; break;
 190                 case QE_CLK21:  clock_bits = 7; break;
 191                 case QE_CLK22:  clock_bits = 8; break;
 192                 case QE_CLK7:   clock_bits = 9; break;
 193                 case QE_CLK8:   clock_bits = 10; break;
 194                 case QE_CLK16:  clock_bits = 11; break;
 195                 default: break;
 196                 }
 197                 break;
 198         default: break;
 199         }
 200
 201         /* Check for invalid combination of clock and UCC number */
 202         if (!clock_bits)
 203                 return -ENOENT;
 204
 205         if (mode == COMM_DIR_RX)
 206                 shift += 4;
 207
 208         clrsetbits_be32(cmxucr, QE_CMXUCR_TX_CLK_SRC_MASK << shift,
 209                 clock_bits << shift);
 210
 211         return 0;
 212 }