Linux 2.6.25.20
[linux/fpc-iii.git] / include / asm-v850 / anna.h
blobcd5eaee103b0f8069bf3de282cbb4ac9d34ba5ef
1 /*
2 * include/asm-v850/anna.h -- Anna V850E2 evaluation cpu chip/board
4 * Copyright (C) 2001,02,03 NEC Electronics Corporation
5 * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
7 * This file is subject to the terms and conditions of the GNU General
8 * Public License. See the file COPYING in the main directory of this
9 * archive for more details.
11 * Written by Miles Bader <miles@gnu.org>
14 #ifndef __V850_ANNA_H__
15 #define __V850_ANNA_H__
17 #include <asm/v850e2.h> /* Based on V850E2 core. */
20 #define CPU_MODEL "v850e2/anna"
21 #define CPU_MODEL_LONG "NEC V850E2/Anna"
22 #define PLATFORM "anna"
23 #define PLATFORM_LONG "NEC/Midas lab V850E2/Anna evaluation board"
25 #define CPU_CLOCK_FREQ 200000000 /* 200MHz */
26 #define SYS_CLOCK_FREQ 33300000 /* 33.3MHz */
29 /* 1MB of static RAM. This memory is mirrored 64 times. */
30 #define SRAM_ADDR 0x04000000
31 #define SRAM_SIZE 0x00100000 /* 1MB */
32 /* 64MB of DRAM. */
33 #define SDRAM_ADDR 0x08000000
34 #define SDRAM_SIZE 0x04000000 /* 64MB */
37 /* For <asm/page.h> */
38 #define PAGE_OFFSET SRAM_ADDR
40 /* We use on-chip RAM, for a few miscellaneous variables that must be
41 accessible using a load instruction relative to R0. The Anna chip has
42 128K of `dLB' ram nominally located at 0xFFF00000, but it's mirrored
43 every 128K, so we can use the `last mirror' (except for the portion at
44 the top which is overridden by I/O space). In addition, the early
45 sample chip we're using has lots of memory errors in the dLB ram, so we
46 use a specially chosen location that has at least 20 bytes of contiguous
47 valid memory (xxxF0020 - xxxF003F). */
48 #define R0_RAM_ADDR 0xFFFF8020
51 /* Anna specific control registers. */
52 #define ANNA_ILBEN_ADDR 0xFFFFF7F2
53 #define ANNA_ILBEN (*(volatile u16 *)ANNA_ILBEN_ADDR)
56 /* I/O port P0-P3. */
57 /* Direct I/O. Bits 0-7 are pins Pn0-Pn7. */
58 #define ANNA_PORT_IO_ADDR(n) (0xFFFFF400 + (n) * 2)
59 #define ANNA_PORT_IO(n) (*(volatile u8 *)ANNA_PORT_IO_ADDR(n))
60 /* Port mode (for direct I/O, 0 = output, 1 = input). */
61 #define ANNA_PORT_PM_ADDR(n) (0xFFFFF410 + (n) * 2)
62 #define ANNA_PORT_PM(n) (*(volatile u8 *)ANNA_PORT_PM_ADDR(n))
65 /* Hardware-specific interrupt numbers (in the kernel IRQ namespace). */
66 #define IRQ_INTP(n) (n) /* Pnnn (pin) interrupts 0-15 */
67 #define IRQ_INTP_NUM 16
68 #define IRQ_INTOV(n) (0x10 + (n)) /* 0-2 */
69 #define IRQ_INTOV_NUM 2
70 #define IRQ_INTCCC(n) (0x12 + (n))
71 #define IRQ_INTCCC_NUM 4
72 #define IRQ_INTCMD(n) (0x16 + (n)) /* interval timer interrupts 0-5 */
73 #define IRQ_INTCMD_NUM 6
74 #define IRQ_INTDMA(n) (0x1C + (n)) /* DMA interrupts 0-3 */
75 #define IRQ_INTDMA_NUM 4
76 #define IRQ_INTDMXER 0x20
77 #define IRQ_INTSRE(n) (0x21 + (n)*3) /* UART 0-1 reception error */
78 #define IRQ_INTSRE_NUM 2
79 #define IRQ_INTSR(n) (0x22 + (n)*3) /* UART 0-1 reception completion */
80 #define IRQ_INTSR_NUM 2
81 #define IRQ_INTST(n) (0x23 + (n)*3) /* UART 0-1 transmission completion */
82 #define IRQ_INTST_NUM 2
84 #define NUM_CPU_IRQS 64
86 #ifndef __ASSEMBLY__
87 /* Initialize chip interrupts. */
88 extern void anna_init_irqs (void);
89 #endif
92 /* Anna UART details (basically the same as the V850E/MA1, but 2 channels). */
93 #define V850E_UART_NUM_CHANNELS 2
94 #define V850E_UART_BASE_FREQ (SYS_CLOCK_FREQ / 2)
95 #define V850E_UART_CHIP_NAME "V850E2/NA85E2A"
97 /* This is the UART channel that's actually connected on the board. */
98 #define V850E_UART_CONSOLE_CHANNEL 1
100 /* This is a function that gets called before configuring the UART. */
101 #define V850E_UART_PRE_CONFIGURE anna_uart_pre_configure
102 #ifndef __ASSEMBLY__
103 extern void anna_uart_pre_configure (unsigned chan,
104 unsigned cflags, unsigned baud);
105 #endif
107 /* This board supports RTS/CTS for the on-chip UART, but only for channel 1. */
109 /* CTS for UART channel 1 is pin P37 (bit 7 of port 3). */
110 #define V850E_UART_CTS(chan) ((chan) == 1 ? !(ANNA_PORT_IO(3) & 0x80) : 1)
111 /* RTS for UART channel 1 is pin P07 (bit 7 of port 0). */
112 #define V850E_UART_SET_RTS(chan, val) \
113 do { \
114 if (chan == 1) { \
115 unsigned old = ANNA_PORT_IO(0); \
116 if (val) \
117 ANNA_PORT_IO(0) = old & ~0x80; \
118 else \
119 ANNA_PORT_IO(0) = old | 0x80; \
121 } while (0)
124 /* Timer C details. */
125 #define V850E_TIMER_C_BASE_ADDR 0xFFFFF600
127 /* Timer D details (the Anna actually has 5 of these; should change later). */
128 #define V850E_TIMER_D_BASE_ADDR 0xFFFFF540
129 #define V850E_TIMER_D_TMD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x0)
130 #define V850E_TIMER_D_CMD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x2)
131 #define V850E_TIMER_D_TMCD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x4)
133 #define V850E_TIMER_D_BASE_FREQ SYS_CLOCK_FREQ
134 #define V850E_TIMER_D_TMCD_CS_MIN 1 /* min 2^1 divider */
137 #endif /* __V850_ANNA_H__ */