Documentation/devicetree/bindings/mfd/tps65912.txt

   1 * TPS65912 Power Management Integrated Circuit bindings
   2
   3 Required properties:
   4  - compatible           : Should be "ti,tps65912".
   5  - reg                  : Slave address or chip select number (I2C / SPI).
   6  - interrupts           : The interrupt line the device is connected to.
   7  - interrupt-controller : Marks the device node as an interrupt controller.
   8  - #interrupt-cells     : The number of cells to describe an IRQ, should be 2.
   9                             The first cell is the IRQ number.
  10                             The second cell is the flags, encoded as trigger
  11                             masks from ../interrupt-controller/interrupts.txt.
  12  - gpio-controller      : Marks the device node as a GPIO Controller.
  13  - #gpio-cells          : Should be two.  The first cell is the pin number and
  14                             the second cell is used to specify flags.
  15                             See ../gpio/gpio.txt for more information.
  16  - regulators:          : List of child nodes that specify the regulator
  17                             initialization data. Child nodes must be named
  18                             after their hardware counterparts: dcdc[1-4] and
  19                             ldo[1-10]. Each child nodes is defined using the
  20                             standard binding for regulators.
  21
  22 Example:
  23
  24         pmic: tps65912@2d {
  25                 compatible = "ti,tps65912";
  26                 reg = <0x2d>;
  27                 interrupt-parent = <&gpio1>;
  28                 interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
  29                 interrupt-controller;
  30                 #interrupt-cells = <2>;
  31                 gpio-controller;
  32                 #gpio-cells = <2>;
  33
  34                 regulators {
  35                         dcdc1 {
  36                                 regulator-name = "vdd_core";
  37                                 regulator-min-microvolt = <912000>;
  38                                 regulator-max-microvolt = <1144000>;
  39                                 regulator-boot-on;
  40                                 regulator-always-on;
  41                         };
  42
  43                         ldo1 {
  44                                 regulator-name = "ldo1";
  45                                 regulator-min-microvolt = <1900000>;
  46                                 regulator-max-microvolt = <1900000>;
  47                         };
  48                 };
  49         };