1 * Rockchip General Register Files (GRF)
3 The general register file will be used to do static set by software, which
4 is composed of many registers for system control.
6 From RK3368 SoCs, the GRF is divided into two sections,
7 - GRF, used for general non-secure system,
8 - SGRF, used for general secure system,
9 - PMUGRF, used for always on system
11 On RK3328 SoCs, the GRF adds a section for USB2PHYGRF,
15 - compatible: GRF should be one of the following:
16 - "rockchip,px30-grf", "syscon": for px30
17 - "rockchip,rk3036-grf", "syscon": for rk3036
18 - "rockchip,rk3066-grf", "syscon": for rk3066
19 - "rockchip,rk3188-grf", "syscon": for rk3188
20 - "rockchip,rk3228-grf", "syscon": for rk3228
21 - "rockchip,rk3288-grf", "syscon": for rk3288
22 - "rockchip,rk3328-grf", "syscon": for rk3328
23 - "rockchip,rk3368-grf", "syscon": for rk3368
24 - "rockchip,rk3399-grf", "syscon": for rk3399
25 - "rockchip,rv1108-grf", "syscon": for rv1108
26 - compatible: PMUGRF should be one of the following:
27 - "rockchip,px30-pmugrf", "syscon": for px30
28 - "rockchip,rk3368-pmugrf", "syscon": for rk3368
29 - "rockchip,rk3399-pmugrf", "syscon": for rk3399
30 - compatible: SGRF should be one of the following
31 - "rockchip,rk3288-sgrf", "syscon": for rk3288
32 - compatible: USB2PHYGRF should be one of the followings
33 - "rockchip,rk3328-usb2phy-grf", "syscon": for rk3328
34 - compatible: USBGRF should be one of the following
35 - "rockchip,rv1108-usbgrf", "syscon": for rv1108
36 - reg: physical base address of the controller and length of memory mapped
39 Example: GRF and PMUGRF of RK3399 SoCs
41 pmugrf: syscon@ff320000 {
42 compatible = "rockchip,rk3399-pmugrf", "syscon";
43 reg = <0x0 0xff320000 0x0 0x1000>;
46 grf: syscon@ff770000 {
47 compatible = "rockchip,rk3399-grf", "syscon";
48 reg = <0x0 0xff770000 0x0 0x10000>;