1 // SPDX-License-Identifier: GPL-2.0
5 * Copyright (C) 2013 Red Hat, Inc., Johannes Weiner
8 #include <linux/memcontrol.h>
9 #include <linux/writeback.h>
10 #include <linux/shmem_fs.h>
11 #include <linux/pagemap.h>
12 #include <linux/atomic.h>
13 #include <linux/module.h>
14 #include <linux/swap.h>
15 #include <linux/dax.h>
22 * Per node, two clock lists are maintained for file pages: the
23 * inactive and the active list. Freshly faulted pages start out at
24 * the head of the inactive list and page reclaim scans pages from the
25 * tail. Pages that are accessed multiple times on the inactive list
26 * are promoted to the active list, to protect them from reclaim,
27 * whereas active pages are demoted to the inactive list when the
28 * active list grows too big.
30 * fault ------------------------+
32 * +--------------+ | +-------------+
33 * reclaim <- | inactive | <-+-- demotion | active | <--+
34 * +--------------+ +-------------+ |
36 * +-------------- promotion ------------------+
39 * Access frequency and refault distance
41 * A workload is thrashing when its pages are frequently used but they
42 * are evicted from the inactive list every time before another access
43 * would have promoted them to the active list.
45 * In cases where the average access distance between thrashing pages
46 * is bigger than the size of memory there is nothing that can be
47 * done - the thrashing set could never fit into memory under any
50 * However, the average access distance could be bigger than the
51 * inactive list, yet smaller than the size of memory. In this case,
52 * the set could fit into memory if it weren't for the currently
53 * active pages - which may be used more, hopefully less frequently:
55 * +-memory available to cache-+
57 * +-inactive------+-active----+
58 * a b | c d e f g h i | J K L M N |
59 * +---------------+-----------+
61 * It is prohibitively expensive to accurately track access frequency
62 * of pages. But a reasonable approximation can be made to measure
63 * thrashing on the inactive list, after which refaulting pages can be
64 * activated optimistically to compete with the existing active pages.
66 * Approximating inactive page access frequency - Observations:
68 * 1. When a page is accessed for the first time, it is added to the
69 * head of the inactive list, slides every existing inactive page
70 * towards the tail by one slot, and pushes the current tail page
73 * 2. When a page is accessed for the second time, it is promoted to
74 * the active list, shrinking the inactive list by one slot. This
75 * also slides all inactive pages that were faulted into the cache
76 * more recently than the activated page towards the tail of the
81 * 1. The sum of evictions and activations between any two points in
82 * time indicate the minimum number of inactive pages accessed in
85 * 2. Moving one inactive page N page slots towards the tail of the
86 * list requires at least N inactive page accesses.
90 * 1. When a page is finally evicted from memory, the number of
91 * inactive pages accessed while the page was in cache is at least
92 * the number of page slots on the inactive list.
94 * 2. In addition, measuring the sum of evictions and activations (E)
95 * at the time of a page's eviction, and comparing it to another
96 * reading (R) at the time the page faults back into memory tells
97 * the minimum number of accesses while the page was not cached.
98 * This is called the refault distance.
100 * Because the first access of the page was the fault and the second
101 * access the refault, we combine the in-cache distance with the
102 * out-of-cache distance to get the complete minimum access distance
105 * NR_inactive + (R - E)
107 * And knowing the minimum access distance of a page, we can easily
108 * tell if the page would be able to stay in cache assuming all page
109 * slots in the cache were available:
111 * NR_inactive + (R - E) <= NR_inactive + NR_active
113 * which can be further simplified to
115 * (R - E) <= NR_active
117 * Put into words, the refault distance (out-of-cache) can be seen as
118 * a deficit in inactive list space (in-cache). If the inactive list
119 * had (R - E) more page slots, the page would not have been evicted
120 * in between accesses, but activated instead. And on a full system,
121 * the only thing eating into inactive list space is active pages.
124 * Refaulting inactive pages
126 * All that is known about the active list is that the pages have been
127 * accessed more than once in the past. This means that at any given
128 * time there is actually a good chance that pages on the active list
129 * are no longer in active use.
131 * So when a refault distance of (R - E) is observed and there are at
132 * least (R - E) active pages, the refaulting page is activated
133 * optimistically in the hope that (R - E) active pages are actually
134 * used less frequently than the refaulting page - or even not used at
137 * That means if inactive cache is refaulting with a suitable refault
138 * distance, we assume the cache workingset is transitioning and put
139 * pressure on the current active list.
141 * If this is wrong and demotion kicks in, the pages which are truly
142 * used more frequently will be reactivated while the less frequently
143 * used once will be evicted from memory.
145 * But if this is right, the stale pages will be pushed out of memory
146 * and the used pages get to stay in cache.
148 * Refaulting active pages
150 * If on the other hand the refaulting pages have recently been
151 * deactivated, it means that the active list is no longer protecting
152 * actively used cache from reclaim. The cache is NOT transitioning to
153 * a different workingset; the existing workingset is thrashing in the
154 * space allocated to the page cache.
159 * For each node's file LRU lists, a counter for inactive evictions
160 * and activations is maintained (node->inactive_age).
162 * On eviction, a snapshot of this counter (along with some bits to
163 * identify the node) is stored in the now empty page cache
164 * slot of the evicted page. This is called a shadow entry.
166 * On cache misses for which there are shadow entries, an eligible
167 * refault distance will immediately activate the refaulting page.
170 #define EVICTION_SHIFT ((BITS_PER_LONG - BITS_PER_XA_VALUE) + \
171 1 + NODES_SHIFT + MEM_CGROUP_ID_SHIFT)
172 #define EVICTION_MASK (~0UL >> EVICTION_SHIFT)
175 * Eviction timestamps need to be able to cover the full range of
176 * actionable refaults. However, bits are tight in the xarray
177 * entry, and after storing the identifier for the lruvec there might
178 * not be enough left to represent every single actionable refault. In
179 * that case, we have to sacrifice granularity for distance, and group
180 * evictions into coarser buckets by shaving off lower timestamp bits.
182 static unsigned int bucket_order __read_mostly
;
184 static void *pack_shadow(int memcgid
, pg_data_t
*pgdat
, unsigned long eviction
,
187 eviction
>>= bucket_order
;
188 eviction
&= EVICTION_MASK
;
189 eviction
= (eviction
<< MEM_CGROUP_ID_SHIFT
) | memcgid
;
190 eviction
= (eviction
<< NODES_SHIFT
) | pgdat
->node_id
;
191 eviction
= (eviction
<< 1) | workingset
;
193 return xa_mk_value(eviction
);
196 static void unpack_shadow(void *shadow
, int *memcgidp
, pg_data_t
**pgdat
,
197 unsigned long *evictionp
, bool *workingsetp
)
199 unsigned long entry
= xa_to_value(shadow
);
203 workingset
= entry
& 1;
205 nid
= entry
& ((1UL << NODES_SHIFT
) - 1);
206 entry
>>= NODES_SHIFT
;
207 memcgid
= entry
& ((1UL << MEM_CGROUP_ID_SHIFT
) - 1);
208 entry
>>= MEM_CGROUP_ID_SHIFT
;
211 *pgdat
= NODE_DATA(nid
);
212 *evictionp
= entry
<< bucket_order
;
213 *workingsetp
= workingset
;
217 * workingset_eviction - note the eviction of a page from memory
218 * @page: the page being evicted
220 * Returns a shadow entry to be stored in @page->mapping->i_pages in place
221 * of the evicted @page so that a later refault can be detected.
223 void *workingset_eviction(struct page
*page
)
225 struct pglist_data
*pgdat
= page_pgdat(page
);
226 struct mem_cgroup
*memcg
= page_memcg(page
);
227 int memcgid
= mem_cgroup_id(memcg
);
228 unsigned long eviction
;
229 struct lruvec
*lruvec
;
231 /* Page is fully exclusive and pins page->mem_cgroup */
232 VM_BUG_ON_PAGE(PageLRU(page
), page
);
233 VM_BUG_ON_PAGE(page_count(page
), page
);
234 VM_BUG_ON_PAGE(!PageLocked(page
), page
);
236 lruvec
= mem_cgroup_lruvec(pgdat
, memcg
);
237 eviction
= atomic_long_inc_return(&lruvec
->inactive_age
);
238 return pack_shadow(memcgid
, pgdat
, eviction
, PageWorkingset(page
));
242 * workingset_refault - evaluate the refault of a previously evicted page
243 * @page: the freshly allocated replacement page
244 * @shadow: shadow entry of the evicted page
246 * Calculates and evaluates the refault distance of the previously
247 * evicted page in the context of the node it was allocated in.
249 void workingset_refault(struct page
*page
, void *shadow
)
251 unsigned long refault_distance
;
252 struct pglist_data
*pgdat
;
253 unsigned long active_file
;
254 struct mem_cgroup
*memcg
;
255 unsigned long eviction
;
256 struct lruvec
*lruvec
;
257 unsigned long refault
;
261 unpack_shadow(shadow
, &memcgid
, &pgdat
, &eviction
, &workingset
);
265 * Look up the memcg associated with the stored ID. It might
266 * have been deleted since the page's eviction.
268 * Note that in rare events the ID could have been recycled
269 * for a new cgroup that refaults a shared page. This is
270 * impossible to tell from the available data. However, this
271 * should be a rare and limited disturbance, and activations
272 * are always speculative anyway. Ultimately, it's the aging
273 * algorithm's job to shake out the minimum access frequency
274 * for the active cache.
276 * XXX: On !CONFIG_MEMCG, this will always return NULL; it
277 * would be better if the root_mem_cgroup existed in all
278 * configurations instead.
280 memcg
= mem_cgroup_from_id(memcgid
);
281 if (!mem_cgroup_disabled() && !memcg
)
283 lruvec
= mem_cgroup_lruvec(pgdat
, memcg
);
284 refault
= atomic_long_read(&lruvec
->inactive_age
);
285 active_file
= lruvec_lru_size(lruvec
, LRU_ACTIVE_FILE
, MAX_NR_ZONES
);
288 * Calculate the refault distance
290 * The unsigned subtraction here gives an accurate distance
291 * across inactive_age overflows in most cases. There is a
292 * special case: usually, shadow entries have a short lifetime
293 * and are either refaulted or reclaimed along with the inode
294 * before they get too old. But it is not impossible for the
295 * inactive_age to lap a shadow entry in the field, which can
296 * then result in a false small refault distance, leading to a
297 * false activation should this old entry actually refault
298 * again. However, earlier kernels used to deactivate
299 * unconditionally with *every* reclaim invocation for the
300 * longest time, so the occasional inappropriate activation
301 * leading to pressure on the active list is not a problem.
303 refault_distance
= (refault
- eviction
) & EVICTION_MASK
;
305 inc_lruvec_state(lruvec
, WORKINGSET_REFAULT
);
308 * Compare the distance to the existing workingset size. We
309 * don't act on pages that couldn't stay resident even if all
310 * the memory was available to the page cache.
312 if (refault_distance
> active_file
)
316 atomic_long_inc(&lruvec
->inactive_age
);
317 inc_lruvec_state(lruvec
, WORKINGSET_ACTIVATE
);
319 /* Page was active prior to eviction */
321 SetPageWorkingset(page
);
322 inc_lruvec_state(lruvec
, WORKINGSET_RESTORE
);
329 * workingset_activation - note a page activation
330 * @page: page that is being activated
332 void workingset_activation(struct page
*page
)
334 struct mem_cgroup
*memcg
;
335 struct lruvec
*lruvec
;
339 * Filter non-memcg pages here, e.g. unmap can call
340 * mark_page_accessed() on VDSO pages.
342 * XXX: See workingset_refault() - this should return
343 * root_mem_cgroup even for !CONFIG_MEMCG.
345 memcg
= page_memcg_rcu(page
);
346 if (!mem_cgroup_disabled() && !memcg
)
348 lruvec
= mem_cgroup_lruvec(page_pgdat(page
), memcg
);
349 atomic_long_inc(&lruvec
->inactive_age
);
355 * Shadow entries reflect the share of the working set that does not
356 * fit into memory, so their number depends on the access pattern of
357 * the workload. In most cases, they will refault or get reclaimed
358 * along with the inode, but a (malicious) workload that streams
359 * through files with a total size several times that of available
360 * memory, while preventing the inodes from being reclaimed, can
361 * create excessive amounts of shadow nodes. To keep a lid on this,
362 * track shadow nodes and reclaim them when they grow way past the
363 * point where they would still be useful.
366 static struct list_lru shadow_nodes
;
368 void workingset_update_node(struct xa_node
*node
)
371 * Track non-empty nodes that contain only shadow entries;
372 * unlink those that contain pages or are being freed.
374 * Avoid acquiring the list_lru lock when the nodes are
375 * already where they should be. The list_empty() test is safe
376 * as node->private_list is protected by the i_pages lock.
378 VM_WARN_ON_ONCE(!irqs_disabled()); /* For __inc_lruvec_page_state */
380 if (node
->count
&& node
->count
== node
->nr_values
) {
381 if (list_empty(&node
->private_list
)) {
382 list_lru_add(&shadow_nodes
, &node
->private_list
);
383 __inc_lruvec_slab_state(node
, WORKINGSET_NODES
);
386 if (!list_empty(&node
->private_list
)) {
387 list_lru_del(&shadow_nodes
, &node
->private_list
);
388 __dec_lruvec_slab_state(node
, WORKINGSET_NODES
);
393 static unsigned long count_shadow_nodes(struct shrinker
*shrinker
,
394 struct shrink_control
*sc
)
396 unsigned long max_nodes
;
400 nodes
= list_lru_shrink_count(&shadow_nodes
, sc
);
403 * Approximate a reasonable limit for the nodes
404 * containing shadow entries. We don't need to keep more
405 * shadow entries than possible pages on the active list,
406 * since refault distances bigger than that are dismissed.
408 * The size of the active list converges toward 100% of
409 * overall page cache as memory grows, with only a tiny
410 * inactive list. Assume the total cache size for that.
412 * Nodes might be sparsely populated, with only one shadow
413 * entry in the extreme case. Obviously, we cannot keep one
414 * node for every eligible shadow entry, so compromise on a
415 * worst-case density of 1/8th. Below that, not all eligible
416 * refaults can be detected anymore.
418 * On 64-bit with 7 xa_nodes per page and 64 slots
419 * each, this will reclaim shadow entries when they consume
420 * ~1.8% of available memory:
422 * PAGE_SIZE / xa_nodes / node_entries * 8 / PAGE_SIZE
426 struct lruvec
*lruvec
;
429 lruvec
= mem_cgroup_lruvec(NODE_DATA(sc
->nid
), sc
->memcg
);
430 for (pages
= 0, i
= 0; i
< NR_LRU_LISTS
; i
++)
431 pages
+= lruvec_page_state_local(lruvec
,
433 pages
+= lruvec_page_state_local(lruvec
, NR_SLAB_RECLAIMABLE
);
434 pages
+= lruvec_page_state_local(lruvec
, NR_SLAB_UNRECLAIMABLE
);
437 pages
= node_present_pages(sc
->nid
);
439 max_nodes
= pages
>> (XA_CHUNK_SHIFT
- 3);
444 if (nodes
<= max_nodes
)
446 return nodes
- max_nodes
;
449 static enum lru_status
shadow_lru_isolate(struct list_head
*item
,
450 struct list_lru_one
*lru
,
451 spinlock_t
*lru_lock
,
452 void *arg
) __must_hold(lru_lock
)
454 struct xa_node
*node
= container_of(item
, struct xa_node
, private_list
);
455 XA_STATE(xas
, node
->array
, 0);
456 struct address_space
*mapping
;
460 * Page cache insertions and deletions synchroneously maintain
461 * the shadow node LRU under the i_pages lock and the
462 * lru_lock. Because the page cache tree is emptied before
463 * the inode can be destroyed, holding the lru_lock pins any
464 * address_space that has nodes on the LRU.
466 * We can then safely transition to the i_pages lock to
467 * pin only the address_space of the particular node we want
468 * to reclaim, take the node off-LRU, and drop the lru_lock.
471 mapping
= container_of(node
->array
, struct address_space
, i_pages
);
473 /* Coming from the list, invert the lock order */
474 if (!xa_trylock(&mapping
->i_pages
)) {
475 spin_unlock_irq(lru_lock
);
480 list_lru_isolate(lru
, item
);
481 __dec_lruvec_slab_state(node
, WORKINGSET_NODES
);
483 spin_unlock(lru_lock
);
486 * The nodes should only contain one or more shadow entries,
487 * no pages, so we expect to be able to remove them all and
488 * delete and free the empty node afterwards.
490 if (WARN_ON_ONCE(!node
->nr_values
))
492 if (WARN_ON_ONCE(node
->count
!= node
->nr_values
))
494 mapping
->nrexceptional
-= node
->nr_values
;
495 xas
.xa_node
= xa_parent_locked(&mapping
->i_pages
, node
);
496 xas
.xa_offset
= node
->offset
;
497 xas
.xa_shift
= node
->shift
+ XA_CHUNK_SHIFT
;
498 xas_set_update(&xas
, workingset_update_node
);
500 * We could store a shadow entry here which was the minimum of the
501 * shadow entries we were tracking ...
503 xas_store(&xas
, NULL
);
504 __inc_lruvec_slab_state(node
, WORKINGSET_NODERECLAIM
);
507 xa_unlock_irq(&mapping
->i_pages
);
508 ret
= LRU_REMOVED_RETRY
;
511 spin_lock_irq(lru_lock
);
515 static unsigned long scan_shadow_nodes(struct shrinker
*shrinker
,
516 struct shrink_control
*sc
)
518 /* list_lru lock nests inside the IRQ-safe i_pages lock */
519 return list_lru_shrink_walk_irq(&shadow_nodes
, sc
, shadow_lru_isolate
,
523 static struct shrinker workingset_shadow_shrinker
= {
524 .count_objects
= count_shadow_nodes
,
525 .scan_objects
= scan_shadow_nodes
,
526 .seeks
= 0, /* ->count reports only fully expendable nodes */
527 .flags
= SHRINKER_NUMA_AWARE
| SHRINKER_MEMCG_AWARE
,
531 * Our list_lru->lock is IRQ-safe as it nests inside the IRQ-safe
534 static struct lock_class_key shadow_nodes_key
;
536 static int __init
workingset_init(void)
538 unsigned int timestamp_bits
;
539 unsigned int max_order
;
542 BUILD_BUG_ON(BITS_PER_LONG
< EVICTION_SHIFT
);
544 * Calculate the eviction bucket size to cover the longest
545 * actionable refault distance, which is currently half of
546 * memory (totalram_pages/2). However, memory hotplug may add
547 * some more pages at runtime, so keep working with up to
548 * double the initial memory by using totalram_pages as-is.
550 timestamp_bits
= BITS_PER_LONG
- EVICTION_SHIFT
;
551 max_order
= fls_long(totalram_pages() - 1);
552 if (max_order
> timestamp_bits
)
553 bucket_order
= max_order
- timestamp_bits
;
554 pr_info("workingset: timestamp_bits=%d max_order=%d bucket_order=%u\n",
555 timestamp_bits
, max_order
, bucket_order
);
557 ret
= prealloc_shrinker(&workingset_shadow_shrinker
);
560 ret
= __list_lru_init(&shadow_nodes
, true, &shadow_nodes_key
,
561 &workingset_shadow_shrinker
);
564 register_shrinker_prepared(&workingset_shadow_shrinker
);
567 free_prealloced_shrinker(&workingset_shadow_shrinker
);
571 module_init(workingset_init
);