scsi: use per-cpu buffer for formatting scsi_print_result()
[linux/fpc-iii.git] / drivers / regulator / max8649.c
blobc8bddcc8f911d11d90e32d18e0d191234bae1656
1 /*
2 * Regulators driver for Maxim max8649
4 * Copyright (C) 2009-2010 Marvell International Ltd.
5 * Haojian Zhuang <haojian.zhuang@marvell.com>
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
11 #include <linux/kernel.h>
12 #include <linux/module.h>
13 #include <linux/err.h>
14 #include <linux/i2c.h>
15 #include <linux/platform_device.h>
16 #include <linux/regulator/driver.h>
17 #include <linux/slab.h>
18 #include <linux/regulator/max8649.h>
19 #include <linux/regmap.h>
21 #define MAX8649_DCDC_VMIN 750000 /* uV */
22 #define MAX8649_DCDC_VMAX 1380000 /* uV */
23 #define MAX8649_DCDC_STEP 10000 /* uV */
24 #define MAX8649_VOL_MASK 0x3f
26 /* Registers */
27 #define MAX8649_MODE0 0x00
28 #define MAX8649_MODE1 0x01
29 #define MAX8649_MODE2 0x02
30 #define MAX8649_MODE3 0x03
31 #define MAX8649_CONTROL 0x04
32 #define MAX8649_SYNC 0x05
33 #define MAX8649_RAMP 0x06
34 #define MAX8649_CHIP_ID1 0x08
35 #define MAX8649_CHIP_ID2 0x09
37 /* Bits */
38 #define MAX8649_EN_PD (1 << 7)
39 #define MAX8649_VID0_PD (1 << 6)
40 #define MAX8649_VID1_PD (1 << 5)
41 #define MAX8649_VID_MASK (3 << 5)
43 #define MAX8649_FORCE_PWM (1 << 7)
44 #define MAX8649_SYNC_EXTCLK (1 << 6)
46 #define MAX8649_EXT_MASK (3 << 6)
48 #define MAX8649_RAMP_MASK (7 << 5)
49 #define MAX8649_RAMP_DOWN (1 << 1)
51 struct max8649_regulator_info {
52 struct device *dev;
53 struct regmap *regmap;
55 unsigned mode:2; /* bit[1:0] = VID1, VID0 */
56 unsigned extclk_freq:2;
57 unsigned extclk:1;
58 unsigned ramp_timing:3;
59 unsigned ramp_down:1;
62 static int max8649_enable_time(struct regulator_dev *rdev)
64 struct max8649_regulator_info *info = rdev_get_drvdata(rdev);
65 int voltage, rate, ret;
66 unsigned int val;
68 /* get voltage */
69 ret = regmap_read(info->regmap, rdev->desc->vsel_reg, &val);
70 if (ret != 0)
71 return ret;
72 val &= MAX8649_VOL_MASK;
73 voltage = regulator_list_voltage_linear(rdev, (unsigned char)val);
75 /* get rate */
76 ret = regmap_read(info->regmap, MAX8649_RAMP, &val);
77 if (ret != 0)
78 return ret;
79 ret = (val & MAX8649_RAMP_MASK) >> 5;
80 rate = (32 * 1000) >> ret; /* uV/uS */
82 return DIV_ROUND_UP(voltage, rate);
85 static int max8649_set_mode(struct regulator_dev *rdev, unsigned int mode)
87 struct max8649_regulator_info *info = rdev_get_drvdata(rdev);
89 switch (mode) {
90 case REGULATOR_MODE_FAST:
91 regmap_update_bits(info->regmap, rdev->desc->vsel_reg,
92 MAX8649_FORCE_PWM, MAX8649_FORCE_PWM);
93 break;
94 case REGULATOR_MODE_NORMAL:
95 regmap_update_bits(info->regmap, rdev->desc->vsel_reg,
96 MAX8649_FORCE_PWM, 0);
97 break;
98 default:
99 return -EINVAL;
101 return 0;
104 static unsigned int max8649_get_mode(struct regulator_dev *rdev)
106 struct max8649_regulator_info *info = rdev_get_drvdata(rdev);
107 unsigned int val;
108 int ret;
110 ret = regmap_read(info->regmap, rdev->desc->vsel_reg, &val);
111 if (ret != 0)
112 return ret;
113 if (val & MAX8649_FORCE_PWM)
114 return REGULATOR_MODE_FAST;
115 return REGULATOR_MODE_NORMAL;
118 static struct regulator_ops max8649_dcdc_ops = {
119 .set_voltage_sel = regulator_set_voltage_sel_regmap,
120 .get_voltage_sel = regulator_get_voltage_sel_regmap,
121 .list_voltage = regulator_list_voltage_linear,
122 .map_voltage = regulator_map_voltage_linear,
123 .enable = regulator_enable_regmap,
124 .disable = regulator_disable_regmap,
125 .is_enabled = regulator_is_enabled_regmap,
126 .enable_time = max8649_enable_time,
127 .set_mode = max8649_set_mode,
128 .get_mode = max8649_get_mode,
132 static struct regulator_desc dcdc_desc = {
133 .name = "max8649",
134 .ops = &max8649_dcdc_ops,
135 .type = REGULATOR_VOLTAGE,
136 .n_voltages = 1 << 6,
137 .owner = THIS_MODULE,
138 .vsel_mask = MAX8649_VOL_MASK,
139 .min_uV = MAX8649_DCDC_VMIN,
140 .uV_step = MAX8649_DCDC_STEP,
141 .enable_reg = MAX8649_CONTROL,
142 .enable_mask = MAX8649_EN_PD,
143 .enable_is_inverted = true,
146 static struct regmap_config max8649_regmap_config = {
147 .reg_bits = 8,
148 .val_bits = 8,
151 static int max8649_regulator_probe(struct i2c_client *client,
152 const struct i2c_device_id *id)
154 struct max8649_platform_data *pdata = dev_get_platdata(&client->dev);
155 struct max8649_regulator_info *info = NULL;
156 struct regulator_dev *regulator;
157 struct regulator_config config = { };
158 unsigned int val;
159 unsigned char data;
160 int ret;
162 info = devm_kzalloc(&client->dev, sizeof(struct max8649_regulator_info),
163 GFP_KERNEL);
164 if (!info)
165 return -ENOMEM;
167 info->regmap = devm_regmap_init_i2c(client, &max8649_regmap_config);
168 if (IS_ERR(info->regmap)) {
169 ret = PTR_ERR(info->regmap);
170 dev_err(&client->dev, "Failed to allocate register map: %d\n", ret);
171 return ret;
174 info->dev = &client->dev;
175 i2c_set_clientdata(client, info);
177 info->mode = pdata->mode;
178 switch (info->mode) {
179 case 0:
180 dcdc_desc.vsel_reg = MAX8649_MODE0;
181 break;
182 case 1:
183 dcdc_desc.vsel_reg = MAX8649_MODE1;
184 break;
185 case 2:
186 dcdc_desc.vsel_reg = MAX8649_MODE2;
187 break;
188 case 3:
189 dcdc_desc.vsel_reg = MAX8649_MODE3;
190 break;
191 default:
192 break;
195 ret = regmap_read(info->regmap, MAX8649_CHIP_ID1, &val);
196 if (ret != 0) {
197 dev_err(info->dev, "Failed to detect ID of MAX8649:%d\n",
198 ret);
199 return ret;
201 dev_info(info->dev, "Detected MAX8649 (ID:%x)\n", val);
203 /* enable VID0 & VID1 */
204 regmap_update_bits(info->regmap, MAX8649_CONTROL, MAX8649_VID_MASK, 0);
206 /* enable/disable external clock synchronization */
207 info->extclk = pdata->extclk;
208 data = (info->extclk) ? MAX8649_SYNC_EXTCLK : 0;
209 regmap_update_bits(info->regmap, dcdc_desc.vsel_reg,
210 MAX8649_SYNC_EXTCLK, data);
211 if (info->extclk) {
212 /* set external clock frequency */
213 info->extclk_freq = pdata->extclk_freq;
214 regmap_update_bits(info->regmap, MAX8649_SYNC, MAX8649_EXT_MASK,
215 info->extclk_freq << 6);
218 if (pdata->ramp_timing) {
219 info->ramp_timing = pdata->ramp_timing;
220 regmap_update_bits(info->regmap, MAX8649_RAMP, MAX8649_RAMP_MASK,
221 info->ramp_timing << 5);
224 info->ramp_down = pdata->ramp_down;
225 if (info->ramp_down) {
226 regmap_update_bits(info->regmap, MAX8649_RAMP, MAX8649_RAMP_DOWN,
227 MAX8649_RAMP_DOWN);
230 config.dev = &client->dev;
231 config.init_data = pdata->regulator;
232 config.driver_data = info;
233 config.regmap = info->regmap;
235 regulator = devm_regulator_register(&client->dev, &dcdc_desc,
236 &config);
237 if (IS_ERR(regulator)) {
238 dev_err(info->dev, "failed to register regulator %s\n",
239 dcdc_desc.name);
240 return PTR_ERR(regulator);
243 return 0;
246 static const struct i2c_device_id max8649_id[] = {
247 { "max8649", 0 },
250 MODULE_DEVICE_TABLE(i2c, max8649_id);
252 static struct i2c_driver max8649_driver = {
253 .probe = max8649_regulator_probe,
254 .driver = {
255 .name = "max8649",
257 .id_table = max8649_id,
260 static int __init max8649_init(void)
262 return i2c_add_driver(&max8649_driver);
264 subsys_initcall(max8649_init);
266 static void __exit max8649_exit(void)
268 i2c_del_driver(&max8649_driver);
270 module_exit(max8649_exit);
272 /* Module information */
273 MODULE_DESCRIPTION("MAXIM 8649 voltage regulator driver");
274 MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>");
275 MODULE_LICENSE("GPL");