5 * SoftDog 0.05: A Software Watchdog Device
7 * (c) Copyright 2007 Hewlett-Packard Development Company, L.P.
8 * Thomas Mingarelli <thomas.mingarelli@hp.com>
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License
12 * version 2 as published by the Free Software Foundation
16 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
18 #include <linux/device.h>
21 #include <linux/bitops.h>
22 #include <linux/kernel.h>
23 #include <linux/miscdevice.h>
24 #include <linux/module.h>
25 #include <linux/moduleparam.h>
26 #include <linux/pci.h>
27 #include <linux/pci_ids.h>
28 #include <linux/types.h>
29 #include <linux/uaccess.h>
30 #include <linux/watchdog.h>
31 #ifdef CONFIG_HPWDT_NMI_DECODING
32 #include <linux/dmi.h>
33 #include <linux/spinlock.h>
34 #include <linux/nmi.h>
35 #include <linux/kdebug.h>
36 #include <linux/notifier.h>
37 #include <asm/cacheflush.h>
38 #endif /* CONFIG_HPWDT_NMI_DECODING */
41 #define HPWDT_VERSION "1.3.3"
42 #define SECS_TO_TICKS(secs) ((secs) * 1000 / 128)
43 #define TICKS_TO_SECS(ticks) ((ticks) * 128 / 1000)
44 #define HPWDT_MAX_TIMER TICKS_TO_SECS(65535)
45 #define DEFAULT_MARGIN 30
47 static unsigned int soft_margin
= DEFAULT_MARGIN
; /* in seconds */
48 static unsigned int reload
; /* the computed soft_margin */
49 static bool nowayout
= WATCHDOG_NOWAYOUT
;
50 static char expect_release
;
51 static unsigned long hpwdt_is_open
;
53 static void __iomem
*pci_mem_addr
; /* the PCI-memory address */
54 static unsigned long __iomem
*hpwdt_timer_reg
;
55 static unsigned long __iomem
*hpwdt_timer_con
;
57 static const struct pci_device_id hpwdt_devices
[] = {
58 { PCI_DEVICE(PCI_VENDOR_ID_COMPAQ
, 0xB203) }, /* iLO2 */
59 { PCI_DEVICE(PCI_VENDOR_ID_HP
, 0x3306) }, /* iLO3 */
60 {0}, /* terminate list */
62 MODULE_DEVICE_TABLE(pci
, hpwdt_devices
);
64 #ifdef CONFIG_HPWDT_NMI_DECODING
65 #define PCI_BIOS32_SD_VALUE 0x5F32335F /* "_32_" */
66 #define CRU_BIOS_SIGNATURE_VALUE 0x55524324
67 #define PCI_BIOS32_PARAGRAPH_LEN 16
68 #define PCI_ROM_BASE1 0x000F0000
69 #define ROM_SIZE 0x10000
71 struct bios32_service_dir
{
81 struct smbios_cru64_info
{
90 #define SMBIOS_CRU64_INFORMATION 212
93 struct smbios_proliant_info
{
102 #define SMBIOS_ICRU_INFORMATION 219
105 struct cmn_registers
{
145 } __attribute__((packed
));
147 static unsigned int hpwdt_nmi_decoding
;
148 static unsigned int allow_kdump
= 1;
149 static unsigned int is_icru
;
150 static unsigned int is_uefi
;
151 static DEFINE_SPINLOCK(rom_lock
);
152 static void *cru_rom_addr
;
153 static struct cmn_registers cmn_regs
;
155 extern asmlinkage
void asminline_call(struct cmn_registers
*pi86Regs
,
156 unsigned long *pRomEntry
);
159 /* --32 Bit Bios------------------------------------------------------------ */
161 #define HPWDT_ARCH 32
165 ".globl asminline_call \n"
166 "asminline_call: \n\t"
168 "movl %esp, %ebp \n\t"
174 "movl 8(%ebp),%eax \n\t"
175 "movl 4(%eax),%ebx \n\t"
176 "movl 8(%eax),%ecx \n\t"
177 "movl 12(%eax),%edx \n\t"
178 "movl 16(%eax),%esi \n\t"
179 "movl 20(%eax),%edi \n\t"
180 "movl (%eax),%eax \n\t"
182 "call *12(%ebp) \n\t"
185 "movl 8(%ebp),%eax \n\t"
186 "movl %ebx,4(%eax) \n\t"
187 "movl %ecx,8(%eax) \n\t"
188 "movl %edx,12(%eax) \n\t"
189 "movl %esi,16(%eax) \n\t"
190 "movl %edi,20(%eax) \n\t"
191 "movw %ds,24(%eax) \n\t"
192 "movw %es,26(%eax) \n\t"
194 "movl %ebx,(%eax) \n\t"
196 "movl %ebx,28(%eax) \n\t"
208 * Routine Description:
209 * This function uses the 32-bit BIOS Service Directory record to
210 * search for a $CRU record.
216 static int cru_detect(unsigned long map_entry
,
217 unsigned long map_offset
)
220 unsigned long *bios32_entrypoint
;
221 unsigned long cru_physical_address
;
222 unsigned long cru_length
;
223 unsigned long physical_bios_base
= 0;
224 unsigned long physical_bios_offset
= 0;
225 int retval
= -ENODEV
;
227 bios32_map
= ioremap(map_entry
, (2 * PAGE_SIZE
));
229 if (bios32_map
== NULL
)
232 bios32_entrypoint
= bios32_map
+ map_offset
;
234 cmn_regs
.u1
.reax
= CRU_BIOS_SIGNATURE_VALUE
;
236 set_memory_x((unsigned long)bios32_map
, 2);
237 asminline_call(&cmn_regs
, bios32_entrypoint
);
239 if (cmn_regs
.u1
.ral
!= 0) {
240 pr_warn("Call succeeded but with an error: 0x%x\n",
243 physical_bios_base
= cmn_regs
.u2
.rebx
;
244 physical_bios_offset
= cmn_regs
.u4
.redx
;
245 cru_length
= cmn_regs
.u3
.recx
;
246 cru_physical_address
=
247 physical_bios_base
+ physical_bios_offset
;
249 /* If the values look OK, then map it in. */
250 if ((physical_bios_base
+ physical_bios_offset
)) {
252 ioremap(cru_physical_address
, cru_length
);
254 set_memory_x((unsigned long)cru_rom_addr
& PAGE_MASK
,
255 (cru_length
+ PAGE_SIZE
- 1) >> PAGE_SHIFT
);
260 pr_debug("CRU Base Address: 0x%lx\n", physical_bios_base
);
261 pr_debug("CRU Offset Address: 0x%lx\n", physical_bios_offset
);
262 pr_debug("CRU Length: 0x%lx\n", cru_length
);
263 pr_debug("CRU Mapped Address: %p\n", &cru_rom_addr
);
272 static int bios_checksum(const char __iomem
*ptr
, int len
)
278 * calculate checksum of size bytes. This should add up
279 * to zero if we have a valid header.
281 for (i
= 0; i
< len
; i
++)
284 return ((sum
== 0) && (len
> 0));
290 * Routine Description:
291 * This function finds the 32-bit BIOS Service Directory
297 static int bios32_present(const char __iomem
*p
)
299 struct bios32_service_dir
*bios_32_ptr
;
301 unsigned long map_entry
, map_offset
;
303 bios_32_ptr
= (struct bios32_service_dir
*) p
;
306 * Search for signature by checking equal to the swizzled value
307 * instead of calling another routine to perform a strcmp.
309 if (bios_32_ptr
->signature
== PCI_BIOS32_SD_VALUE
) {
310 length
= bios_32_ptr
->length
* PCI_BIOS32_PARAGRAPH_LEN
;
311 if (bios_checksum(p
, length
)) {
313 * According to the spec, we're looking for the
314 * first 4KB-aligned address below the entrypoint
315 * listed in the header. The Service Directory code
316 * is guaranteed to occupy no more than 2 4KB pages.
318 map_entry
= bios_32_ptr
->entry_point
& ~(PAGE_SIZE
- 1);
319 map_offset
= bios_32_ptr
->entry_point
- map_entry
;
321 return cru_detect(map_entry
, map_offset
);
327 static int detect_cru_service(void)
333 * Search from 0x0f0000 through 0x0fffff, inclusive.
335 p
= ioremap(PCI_ROM_BASE1
, ROM_SIZE
);
339 for (q
= p
; q
< p
+ ROM_SIZE
; q
+= 16) {
340 rc
= bios32_present(q
);
347 /* ------------------------------------------------------------------------- */
348 #endif /* CONFIG_X86_32 */
350 /* --64 Bit Bios------------------------------------------------------------ */
352 #define HPWDT_ARCH 64
356 ".globl asminline_call \n"
357 "asminline_call: \n\t"
359 "movq %rsp, %rbp \n\t"
365 "movq %rsi, %r12 \n\t"
366 "movq %rdi, %r9 \n\t"
367 "movl 4(%r9),%ebx \n\t"
368 "movl 8(%r9),%ecx \n\t"
369 "movl 12(%r9),%edx \n\t"
370 "movl 16(%r9),%esi \n\t"
371 "movl 20(%r9),%edi \n\t"
372 "movl (%r9),%eax \n\t"
376 "movl %eax, (%r9) \n\t"
377 "movl %ebx, 4(%r9) \n\t"
378 "movl %ecx, 8(%r9) \n\t"
379 "movl %edx, 12(%r9) \n\t"
380 "movl %esi, 16(%r9) \n\t"
381 "movl %edi, 20(%r9) \n\t"
382 "movq %r12, %rax \n\t"
383 "movl %eax, 28(%r9) \n\t"
396 * Routine Description:
397 * This function checks whether or not a SMBIOS/DMI record is
398 * the 64bit CRU info or not
400 static void dmi_find_cru(const struct dmi_header
*dm
, void *dummy
)
402 struct smbios_cru64_info
*smbios_cru64_ptr
;
403 unsigned long cru_physical_address
;
405 if (dm
->type
== SMBIOS_CRU64_INFORMATION
) {
406 smbios_cru64_ptr
= (struct smbios_cru64_info
*) dm
;
407 if (smbios_cru64_ptr
->signature
== CRU_BIOS_SIGNATURE_VALUE
) {
408 cru_physical_address
=
409 smbios_cru64_ptr
->physical_address
+
410 smbios_cru64_ptr
->double_offset
;
411 cru_rom_addr
= ioremap(cru_physical_address
,
412 smbios_cru64_ptr
->double_length
);
413 set_memory_x((unsigned long)cru_rom_addr
& PAGE_MASK
,
414 smbios_cru64_ptr
->double_length
>> PAGE_SHIFT
);
419 static int detect_cru_service(void)
423 dmi_walk(dmi_find_cru
, NULL
);
425 /* if cru_rom_addr has been set then we found a CRU service */
426 return ((cru_rom_addr
!= NULL
) ? 0 : -ENODEV
);
428 /* ------------------------------------------------------------------------- */
429 #endif /* CONFIG_X86_64 */
430 #endif /* CONFIG_HPWDT_NMI_DECODING */
433 * Watchdog operations
435 static void hpwdt_start(void)
437 reload
= SECS_TO_TICKS(soft_margin
);
438 iowrite16(reload
, hpwdt_timer_reg
);
439 iowrite8(0x85, hpwdt_timer_con
);
442 static void hpwdt_stop(void)
446 data
= ioread8(hpwdt_timer_con
);
448 iowrite8(data
, hpwdt_timer_con
);
451 static void hpwdt_ping(void)
453 iowrite16(reload
, hpwdt_timer_reg
);
456 static int hpwdt_change_timer(int new_margin
)
458 if (new_margin
< 1 || new_margin
> HPWDT_MAX_TIMER
) {
459 pr_warn("New value passed in is invalid: %d seconds\n",
464 soft_margin
= new_margin
;
465 pr_debug("New timer passed in is %d seconds\n", new_margin
);
466 reload
= SECS_TO_TICKS(soft_margin
);
471 static int hpwdt_time_left(void)
473 return TICKS_TO_SECS(ioread16(hpwdt_timer_reg
));
476 #ifdef CONFIG_HPWDT_NMI_DECODING
480 static int hpwdt_pretimeout(unsigned int ulReason
, struct pt_regs
*regs
)
482 unsigned long rom_pl
;
483 static int die_nmi_called
;
485 if (!hpwdt_nmi_decoding
)
488 spin_lock_irqsave(&rom_lock
, rom_pl
);
489 if (!die_nmi_called
&& !is_icru
&& !is_uefi
)
490 asminline_call(&cmn_regs
, cru_rom_addr
);
492 spin_unlock_irqrestore(&rom_lock
, rom_pl
);
497 if (!is_icru
&& !is_uefi
) {
498 if (cmn_regs
.u1
.ral
== 0) {
499 panic("An NMI occurred, "
500 "but unable to determine source.\n");
503 panic("An NMI occurred. Depending on your system the reason "
504 "for the NMI is logged in any one of the following "
506 "1. Integrated Management Log (IML)\n"
508 "3. OA Forward Progress Log\n"
514 #endif /* CONFIG_HPWDT_NMI_DECODING */
517 * /dev/watchdog handling
519 static int hpwdt_open(struct inode
*inode
, struct file
*file
)
521 /* /dev/watchdog can only be opened once */
522 if (test_and_set_bit(0, &hpwdt_is_open
))
525 /* Start the watchdog */
529 return nonseekable_open(inode
, file
);
532 static int hpwdt_release(struct inode
*inode
, struct file
*file
)
534 /* Stop the watchdog */
535 if (expect_release
== 42) {
538 pr_crit("Unexpected close, not stopping watchdog!\n");
544 /* /dev/watchdog is being closed, make sure it can be re-opened */
545 clear_bit(0, &hpwdt_is_open
);
550 static ssize_t
hpwdt_write(struct file
*file
, const char __user
*data
,
551 size_t len
, loff_t
*ppos
)
553 /* See if we got the magic character 'V' and reload the timer */
558 /* note: just in case someone wrote the magic character
559 * five months ago... */
562 /* scan to see whether or not we got the magic char. */
563 for (i
= 0; i
!= len
; i
++) {
565 if (get_user(c
, data
+ i
))
572 /* someone wrote to us, we should reload the timer */
579 static const struct watchdog_info ident
= {
580 .options
= WDIOF_SETTIMEOUT
|
581 WDIOF_KEEPALIVEPING
|
583 .identity
= "HP iLO2+ HW Watchdog Timer",
586 static long hpwdt_ioctl(struct file
*file
, unsigned int cmd
,
589 void __user
*argp
= (void __user
*)arg
;
590 int __user
*p
= argp
;
595 case WDIOC_GETSUPPORT
:
597 if (copy_to_user(argp
, &ident
, sizeof(ident
)))
601 case WDIOC_GETSTATUS
:
602 case WDIOC_GETBOOTSTATUS
:
603 ret
= put_user(0, p
);
606 case WDIOC_KEEPALIVE
:
611 case WDIOC_SETTIMEOUT
:
612 ret
= get_user(new_margin
, p
);
616 ret
= hpwdt_change_timer(new_margin
);
622 case WDIOC_GETTIMEOUT
:
623 ret
= put_user(soft_margin
, p
);
626 case WDIOC_GETTIMELEFT
:
627 ret
= put_user(hpwdt_time_left(), p
);
636 static const struct file_operations hpwdt_fops
= {
637 .owner
= THIS_MODULE
,
639 .write
= hpwdt_write
,
640 .unlocked_ioctl
= hpwdt_ioctl
,
642 .release
= hpwdt_release
,
645 static struct miscdevice hpwdt_miscdev
= {
646 .minor
= WATCHDOG_MINOR
,
655 #ifdef CONFIG_HPWDT_NMI_DECODING
656 #ifdef CONFIG_X86_LOCAL_APIC
657 static void hpwdt_check_nmi_decoding(struct pci_dev
*dev
)
660 * If nmi_watchdog is turned off then we can turn on
661 * our nmi decoding capability.
663 hpwdt_nmi_decoding
= 1;
666 static void hpwdt_check_nmi_decoding(struct pci_dev
*dev
)
668 dev_warn(&dev
->dev
, "NMI decoding is disabled. "
669 "Your kernel does not support a NMI Watchdog.\n");
671 #endif /* CONFIG_X86_LOCAL_APIC */
676 * Routine Description:
677 * This function checks whether or not we are on an iCRU-based server.
678 * This check is independent of architecture and needs to be made for
679 * any ProLiant system.
681 static void dmi_find_icru(const struct dmi_header
*dm
, void *dummy
)
683 struct smbios_proliant_info
*smbios_proliant_ptr
;
685 if (dm
->type
== SMBIOS_ICRU_INFORMATION
) {
686 smbios_proliant_ptr
= (struct smbios_proliant_info
*) dm
;
687 if (smbios_proliant_ptr
->misc_features
& 0x01)
689 if (smbios_proliant_ptr
->misc_features
& 0x408)
694 static int hpwdt_init_nmi_decoding(struct pci_dev
*dev
)
699 * On typical CRU-based systems we need to map that service in
700 * the BIOS. For 32 bit Operating Systems we need to go through
701 * the 32 Bit BIOS Service Directory. For 64 bit Operating
702 * Systems we get that service through SMBIOS.
704 * On systems that support the new iCRU service all we need to
705 * do is call dmi_walk to get the supported flag value and skip
706 * the old cru detect code.
708 dmi_walk(dmi_find_icru
, NULL
);
709 if (!is_icru
&& !is_uefi
) {
712 * We need to map the ROM to get the CRU service.
713 * For 32 bit Operating Systems we need to go through the 32 Bit
714 * BIOS Service Directory
715 * For 64 bit Operating Systems we get that service through SMBIOS.
717 retval
= detect_cru_service();
720 "Unable to detect the %d Bit CRU Service.\n",
726 * We know this is the only CRU call we need to make so lets keep as
727 * few instructions as possible once the NMI comes in.
729 cmn_regs
.u1
.rah
= 0x0D;
730 cmn_regs
.u1
.ral
= 0x02;
734 * Only one function can register for NMI_UNKNOWN
736 retval
= register_nmi_handler(NMI_UNKNOWN
, hpwdt_pretimeout
, 0, "hpwdt");
739 retval
= register_nmi_handler(NMI_SERR
, hpwdt_pretimeout
, 0, "hpwdt");
742 retval
= register_nmi_handler(NMI_IO_CHECK
, hpwdt_pretimeout
, 0, "hpwdt");
747 "HP Watchdog Timer Driver: NMI decoding initialized"
748 ", allow kernel dump: %s (default = 0/OFF)\n",
749 (allow_kdump
== 0) ? "OFF" : "ON");
753 unregister_nmi_handler(NMI_SERR
, "hpwdt");
755 unregister_nmi_handler(NMI_UNKNOWN
, "hpwdt");
758 "Unable to register a die notifier (err=%d).\n",
761 iounmap(cru_rom_addr
);
765 static void hpwdt_exit_nmi_decoding(void)
767 unregister_nmi_handler(NMI_UNKNOWN
, "hpwdt");
768 unregister_nmi_handler(NMI_SERR
, "hpwdt");
769 unregister_nmi_handler(NMI_IO_CHECK
, "hpwdt");
771 iounmap(cru_rom_addr
);
773 #else /* !CONFIG_HPWDT_NMI_DECODING */
774 static void hpwdt_check_nmi_decoding(struct pci_dev
*dev
)
778 static int hpwdt_init_nmi_decoding(struct pci_dev
*dev
)
783 static void hpwdt_exit_nmi_decoding(void)
786 #endif /* CONFIG_HPWDT_NMI_DECODING */
788 static int hpwdt_init_one(struct pci_dev
*dev
,
789 const struct pci_device_id
*ent
)
794 * Check if we can do NMI decoding or not
796 hpwdt_check_nmi_decoding(dev
);
799 * First let's find out if we are on an iLO2+ server. We will
800 * not run on a legacy ASM box.
801 * So we only support the G5 ProLiant servers and higher.
803 if (dev
->subsystem_vendor
!= PCI_VENDOR_ID_HP
) {
805 "This server does not have an iLO2+ ASIC.\n");
810 * Ignore all auxilary iLO devices with the following PCI ID
812 if (dev
->subsystem_device
== 0x1979)
815 if (pci_enable_device(dev
)) {
817 "Not possible to enable PCI Device: 0x%x:0x%x.\n",
818 ent
->vendor
, ent
->device
);
822 pci_mem_addr
= pci_iomap(dev
, 1, 0x80);
825 "Unable to detect the iLO2+ server memory.\n");
827 goto error_pci_iomap
;
829 hpwdt_timer_reg
= pci_mem_addr
+ 0x70;
830 hpwdt_timer_con
= pci_mem_addr
+ 0x72;
832 /* Make sure that timer is disabled until /dev/watchdog is opened */
835 /* Make sure that we have a valid soft_margin */
836 if (hpwdt_change_timer(soft_margin
))
837 hpwdt_change_timer(DEFAULT_MARGIN
);
839 /* Initialize NMI Decoding functionality */
840 retval
= hpwdt_init_nmi_decoding(dev
);
842 goto error_init_nmi_decoding
;
844 retval
= misc_register(&hpwdt_miscdev
);
847 "Unable to register miscdev on minor=%d (err=%d).\n",
848 WATCHDOG_MINOR
, retval
);
849 goto error_misc_register
;
852 dev_info(&dev
->dev
, "HP Watchdog Timer Driver: %s"
853 ", timer margin: %d seconds (nowayout=%d).\n",
854 HPWDT_VERSION
, soft_margin
, nowayout
);
858 hpwdt_exit_nmi_decoding();
859 error_init_nmi_decoding
:
860 pci_iounmap(dev
, pci_mem_addr
);
862 pci_disable_device(dev
);
866 static void hpwdt_exit(struct pci_dev
*dev
)
871 misc_deregister(&hpwdt_miscdev
);
872 hpwdt_exit_nmi_decoding();
873 pci_iounmap(dev
, pci_mem_addr
);
874 pci_disable_device(dev
);
877 static struct pci_driver hpwdt_driver
= {
879 .id_table
= hpwdt_devices
,
880 .probe
= hpwdt_init_one
,
881 .remove
= hpwdt_exit
,
884 MODULE_AUTHOR("Tom Mingarelli");
885 MODULE_DESCRIPTION("hp watchdog driver");
886 MODULE_LICENSE("GPL");
887 MODULE_VERSION(HPWDT_VERSION
);
889 module_param(soft_margin
, int, 0);
890 MODULE_PARM_DESC(soft_margin
, "Watchdog timeout in seconds");
892 module_param(nowayout
, bool, 0);
893 MODULE_PARM_DESC(nowayout
, "Watchdog cannot be stopped once started (default="
894 __MODULE_STRING(WATCHDOG_NOWAYOUT
) ")");
896 #ifdef CONFIG_HPWDT_NMI_DECODING
897 module_param(allow_kdump
, int, 0);
898 MODULE_PARM_DESC(allow_kdump
, "Start a kernel dump after NMI occurs");
899 #endif /* !CONFIG_HPWDT_NMI_DECODING */
901 module_pci_driver(hpwdt_driver
);