?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
drivers: avoid format string in dev_set_name
[linux/fpc-iii.git] / drivers / video / mxsfb.c
blob21223d475b39bb54aff2f58e95a73282f37754dd
1 /*
2 * Copyright (C) 2010 Juergen Beisert, Pengutronix
3 *
4 * This code is based on:
5 * Author: Vitaly Wool <vital@embeddedalley.com>
6 *
7 * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
8 * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
9 *
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License
12 * as published by the Free Software Foundation; either version 2
13 * of the License, or (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 */
19
20 #define DRIVER_NAME "mxsfb"
21
22 /**
23 * @file
24 * @brief LCDIF driver for i.MX23 and i.MX28
25 *
26 * The LCDIF support four modes of operation
27 * - MPU interface (to drive smart displays) -> not supported yet
28 * - VSYNC interface (like MPU interface plus Vsync) -> not supported yet
29 * - Dotclock interface (to drive LC displays with RGB data and sync signals)
30 * - DVI (to drive ITU-R BT656) -> not supported yet
31 *
32 * This driver depends on a correct setup of the pins used for this purpose
33 * (platform specific).
34 *
35 * For the developer: Don't forget to set the data bus width to the display
36 * in the imx_fb_videomode structure. You will else end up with ugly colours.
37 * If you fight against jitter you can vary the clock delay. This is a feature
38 * of the i.MX28 and you can vary it between 2 ns ... 8 ns in 2 ns steps. Give
39 * the required value in the imx_fb_videomode structure.
40 */
41
42 #include <linux/module.h>
43 #include <linux/kernel.h>
44 #include <linux/of_device.h>
45 #include <linux/platform_device.h>
46 #include <linux/clk.h>
47 #include <linux/dma-mapping.h>
48 #include <linux/io.h>
49 #include <linux/pinctrl/consumer.h>
50 #include <linux/fb.h>
51 #include <linux/regulator/consumer.h>
52 #include <video/of_display_timing.h>
53 #include <video/videomode.h>
54
55 #define REG_SET 4
56 #define REG_CLR 8
57
58 #define LCDC_CTRL 0x00
59 #define LCDC_CTRL1 0x10
60 #define LCDC_V4_CTRL2 0x20
61 #define LCDC_V3_TRANSFER_COUNT 0x20
62 #define LCDC_V4_TRANSFER_COUNT 0x30
63 #define LCDC_V4_CUR_BUF 0x40
64 #define LCDC_V4_NEXT_BUF 0x50
65 #define LCDC_V3_CUR_BUF 0x30
66 #define LCDC_V3_NEXT_BUF 0x40
67 #define LCDC_TIMING 0x60
68 #define LCDC_VDCTRL0 0x70
69 #define LCDC_VDCTRL1 0x80
70 #define LCDC_VDCTRL2 0x90
71 #define LCDC_VDCTRL3 0xa0
72 #define LCDC_VDCTRL4 0xb0
73 #define LCDC_DVICTRL0 0xc0
74 #define LCDC_DVICTRL1 0xd0
75 #define LCDC_DVICTRL2 0xe0
76 #define LCDC_DVICTRL3 0xf0
77 #define LCDC_DVICTRL4 0x100
78 #define LCDC_V4_DATA 0x180
79 #define LCDC_V3_DATA 0x1b0
80 #define LCDC_V4_DEBUG0 0x1d0
81 #define LCDC_V3_DEBUG0 0x1f0
82
83 #define CTRL_SFTRST (1 << 31)
84 #define CTRL_CLKGATE (1 << 30)
85 #define CTRL_BYPASS_COUNT (1 << 19)
86 #define CTRL_VSYNC_MODE (1 << 18)
87 #define CTRL_DOTCLK_MODE (1 << 17)
88 #define CTRL_DATA_SELECT (1 << 16)
89 #define CTRL_SET_BUS_WIDTH(x) (((x) & 0x3) << 10)
90 #define CTRL_GET_BUS_WIDTH(x) (((x) >> 10) & 0x3)
91 #define CTRL_SET_WORD_LENGTH(x) (((x) & 0x3) << 8)
92 #define CTRL_GET_WORD_LENGTH(x) (((x) >> 8) & 0x3)
93 #define CTRL_MASTER (1 << 5)
94 #define CTRL_DF16 (1 << 3)
95 #define CTRL_DF18 (1 << 2)
96 #define CTRL_DF24 (1 << 1)
97 #define CTRL_RUN (1 << 0)
98
99 #define CTRL1_FIFO_CLEAR (1 << 21)
100 #define CTRL1_SET_BYTE_PACKAGING(x) (((x) & 0xf) << 16)
101 #define CTRL1_GET_BYTE_PACKAGING(x) (((x) >> 16) & 0xf)
102
103 #define TRANSFER_COUNT_SET_VCOUNT(x) (((x) & 0xffff) << 16)
104 #define TRANSFER_COUNT_GET_VCOUNT(x) (((x) >> 16) & 0xffff)
105 #define TRANSFER_COUNT_SET_HCOUNT(x) ((x) & 0xffff)
106 #define TRANSFER_COUNT_GET_HCOUNT(x) ((x) & 0xffff)
107
108
109 #define VDCTRL0_ENABLE_PRESENT (1 << 28)
110 #define VDCTRL0_VSYNC_ACT_HIGH (1 << 27)
111 #define VDCTRL0_HSYNC_ACT_HIGH (1 << 26)
112 #define VDCTRL0_DOTCLK_ACT_FALLING (1 << 25)
113 #define VDCTRL0_ENABLE_ACT_HIGH (1 << 24)
114 #define VDCTRL0_VSYNC_PERIOD_UNIT (1 << 21)
115 #define VDCTRL0_VSYNC_PULSE_WIDTH_UNIT (1 << 20)
116 #define VDCTRL0_HALF_LINE (1 << 19)
117 #define VDCTRL0_HALF_LINE_MODE (1 << 18)
118 #define VDCTRL0_SET_VSYNC_PULSE_WIDTH(x) ((x) & 0x3ffff)
119 #define VDCTRL0_GET_VSYNC_PULSE_WIDTH(x) ((x) & 0x3ffff)
120
121 #define VDCTRL2_SET_HSYNC_PERIOD(x) ((x) & 0x3ffff)
122 #define VDCTRL2_GET_HSYNC_PERIOD(x) ((x) & 0x3ffff)
123
124 #define VDCTRL3_MUX_SYNC_SIGNALS (1 << 29)
125 #define VDCTRL3_VSYNC_ONLY (1 << 28)
126 #define SET_HOR_WAIT_CNT(x) (((x) & 0xfff) << 16)
127 #define GET_HOR_WAIT_CNT(x) (((x) >> 16) & 0xfff)
128 #define SET_VERT_WAIT_CNT(x) ((x) & 0xffff)
129 #define GET_VERT_WAIT_CNT(x) ((x) & 0xffff)
130
131 #define VDCTRL4_SET_DOTCLK_DLY(x) (((x) & 0x7) << 29) /* v4 only */
132 #define VDCTRL4_GET_DOTCLK_DLY(x) (((x) >> 29) & 0x7) /* v4 only */
133 #define VDCTRL4_SYNC_SIGNALS_ON (1 << 18)
134 #define SET_DOTCLK_H_VALID_DATA_CNT(x) ((x) & 0x3ffff)
135
136 #define DEBUG0_HSYNC (1 < 26)
137 #define DEBUG0_VSYNC (1 < 25)
138
139 #define MIN_XRES 120
140 #define MIN_YRES 120
141
142 #define RED 0
143 #define GREEN 1
144 #define BLUE 2
145 #define TRANSP 3
146
147 #define STMLCDIF_8BIT 1 /** pixel data bus to the display is of 8 bit width */
148 #define STMLCDIF_16BIT 0 /** pixel data bus to the display is of 16 bit width */
149 #define STMLCDIF_18BIT 2 /** pixel data bus to the display is of 18 bit width */
150 #define STMLCDIF_24BIT 3 /** pixel data bus to the display is of 24 bit width */
151
152 #define MXSFB_SYNC_DATA_ENABLE_HIGH_ACT (1 << 6)
153 #define MXSFB_SYNC_DOTCLK_FALLING_ACT (1 << 7) /* negtive edge sampling */
154
155 enum mxsfb_devtype {
156 MXSFB_V3,
157 MXSFB_V4,
158 };
159
160 /* CPU dependent register offsets */
161 struct mxsfb_devdata {
162 unsigned transfer_count;
163 unsigned cur_buf;
164 unsigned next_buf;
165 unsigned debug0;
166 unsigned hs_wdth_mask;
167 unsigned hs_wdth_shift;
168 unsigned ipversion;
169 };
170
171 struct mxsfb_info {
172 struct fb_info fb_info;
173 struct platform_device *pdev;
174 struct clk *clk;
175 void __iomem *base; /* registers */
176 unsigned allocated_size;
177 int enabled;
178 unsigned ld_intf_width;
179 unsigned dotclk_delay;
180 const struct mxsfb_devdata *devdata;
181 u32 sync;
182 struct regulator *reg_lcd;
183 };
184
185 #define mxsfb_is_v3(host) (host->devdata->ipversion == 3)
186 #define mxsfb_is_v4(host) (host->devdata->ipversion == 4)
187
188 static const struct mxsfb_devdata mxsfb_devdata[] = {
189 [MXSFB_V3] = {
190 .transfer_count = LCDC_V3_TRANSFER_COUNT,
191 .cur_buf = LCDC_V3_CUR_BUF,
192 .next_buf = LCDC_V3_NEXT_BUF,
193 .debug0 = LCDC_V3_DEBUG0,
194 .hs_wdth_mask = 0xff,
195 .hs_wdth_shift = 24,
196 .ipversion = 3,
197 },
198 [MXSFB_V4] = {
199 .transfer_count = LCDC_V4_TRANSFER_COUNT,
200 .cur_buf = LCDC_V4_CUR_BUF,
201 .next_buf = LCDC_V4_NEXT_BUF,
202 .debug0 = LCDC_V4_DEBUG0,
203 .hs_wdth_mask = 0x3fff,
204 .hs_wdth_shift = 18,
205 .ipversion = 4,
206 },
207 };
208
209 #define to_imxfb_host(x) (container_of(x, struct mxsfb_info, fb_info))
210
211 /* mask and shift depends on architecture */
212 static inline u32 set_hsync_pulse_width(struct mxsfb_info *host, unsigned val)
213 {
214 return (val & host->devdata->hs_wdth_mask) <<
215 host->devdata->hs_wdth_shift;
216 }
217
218 static inline u32 get_hsync_pulse_width(struct mxsfb_info *host, unsigned val)
219 {
220 return (val >> host->devdata->hs_wdth_shift) &
221 host->devdata->hs_wdth_mask;
222 }
223
224 static const struct fb_bitfield def_rgb565[] = {
225 [RED] = {
226 .offset = 11,
227 .length = 5,
228 },
229 [GREEN] = {
230 .offset = 5,
231 .length = 6,
232 },
233 [BLUE] = {
234 .offset = 0,
235 .length = 5,
236 },
237 [TRANSP] = { /* no support for transparency */
238 .length = 0,
239 }
240 };
241
242 static const struct fb_bitfield def_rgb666[] = {
243 [RED] = {
244 .offset = 16,
245 .length = 6,
246 },
247 [GREEN] = {
248 .offset = 8,
249 .length = 6,
250 },
251 [BLUE] = {
252 .offset = 0,
253 .length = 6,
254 },
255 [TRANSP] = { /* no support for transparency */
256 .length = 0,
257 }
258 };
259
260 static const struct fb_bitfield def_rgb888[] = {
261 [RED] = {
262 .offset = 16,
263 .length = 8,
264 },
265 [GREEN] = {
266 .offset = 8,
267 .length = 8,
268 },
269 [BLUE] = {
270 .offset = 0,
271 .length = 8,
272 },
273 [TRANSP] = { /* no support for transparency */
274 .length = 0,
275 }
276 };
277
278 static inline unsigned chan_to_field(unsigned chan, struct fb_bitfield *bf)
279 {
280 chan &= 0xffff;
281 chan >>= 16 - bf->length;
282 return chan << bf->offset;
283 }
284
285 static int mxsfb_check_var(struct fb_var_screeninfo *var,
286 struct fb_info *fb_info)
287 {
288 struct mxsfb_info *host = to_imxfb_host(fb_info);
289 const struct fb_bitfield *rgb = NULL;
290
291 if (var->xres < MIN_XRES)
292 var->xres = MIN_XRES;
293 if (var->yres < MIN_YRES)
294 var->yres = MIN_YRES;
295
296 var->xres_virtual = var->xres;
297
298 var->yres_virtual = var->yres;
299
300 switch (var->bits_per_pixel) {
301 case 16:
302 /* always expect RGB 565 */
303 rgb = def_rgb565;
304 break;
305 case 32:
306 switch (host->ld_intf_width) {
307 case STMLCDIF_8BIT:
308 pr_debug("Unsupported LCD bus width mapping\n");
309 break;
310 case STMLCDIF_16BIT:
311 case STMLCDIF_18BIT:
312 /* 24 bit to 18 bit mapping */
313 rgb = def_rgb666;
314 break;
315 case STMLCDIF_24BIT:
316 /* real 24 bit */
317 rgb = def_rgb888;
318 break;
319 }
320 break;
321 default:
322 pr_debug("Unsupported colour depth: %u\n", var->bits_per_pixel);
323 return -EINVAL;
324 }
325
326 /*
327 * Copy the RGB parameters for this display
328 * from the machine specific parameters.
329 */
330 var->red = rgb[RED];
331 var->green = rgb[GREEN];
332 var->blue = rgb[BLUE];
333 var->transp = rgb[TRANSP];
334
335 return 0;
336 }
337
338 static void mxsfb_enable_controller(struct fb_info *fb_info)
339 {
340 struct mxsfb_info *host = to_imxfb_host(fb_info);
341 u32 reg;
342 int ret;
343
344 dev_dbg(&host->pdev->dev, "%s\n", __func__);
345
346 if (host->reg_lcd) {
347 ret = regulator_enable(host->reg_lcd);
348 if (ret) {
349 dev_err(&host->pdev->dev,
350 "lcd regulator enable failed: %d\n", ret);
351 return;
352 }
353 }
354
355 clk_prepare_enable(host->clk);
356 clk_set_rate(host->clk, PICOS2KHZ(fb_info->var.pixclock) * 1000U);
357
358 /* if it was disabled, re-enable the mode again */
359 writel(CTRL_DOTCLK_MODE, host->base + LCDC_CTRL + REG_SET);
360
361 /* enable the SYNC signals first, then the DMA engine */
362 reg = readl(host->base + LCDC_VDCTRL4);
363 reg |= VDCTRL4_SYNC_SIGNALS_ON;
364 writel(reg, host->base + LCDC_VDCTRL4);
365
366 writel(CTRL_RUN, host->base + LCDC_CTRL + REG_SET);
367
368 host->enabled = 1;
369 }
370
371 static void mxsfb_disable_controller(struct fb_info *fb_info)
372 {
373 struct mxsfb_info *host = to_imxfb_host(fb_info);
374 unsigned loop;
375 u32 reg;
376 int ret;
377
378 dev_dbg(&host->pdev->dev, "%s\n", __func__);
379
380 /*
381 * Even if we disable the controller here, it will still continue
382 * until its FIFOs are running out of data
383 */
384 writel(CTRL_DOTCLK_MODE, host->base + LCDC_CTRL + REG_CLR);
385
386 loop = 1000;
387 while (loop) {
388 reg = readl(host->base + LCDC_CTRL);
389 if (!(reg & CTRL_RUN))
390 break;
391 loop--;
392 }
393
394 reg = readl(host->base + LCDC_VDCTRL4);
395 writel(reg & ~VDCTRL4_SYNC_SIGNALS_ON, host->base + LCDC_VDCTRL4);
396
397 clk_disable_unprepare(host->clk);
398
399 host->enabled = 0;
400
401 if (host->reg_lcd) {
402 ret = regulator_disable(host->reg_lcd);
403 if (ret)
404 dev_err(&host->pdev->dev,
405 "lcd regulator disable failed: %d\n", ret);
406 }
407 }
408
409 static int mxsfb_set_par(struct fb_info *fb_info)
410 {
411 struct mxsfb_info *host = to_imxfb_host(fb_info);
412 u32 ctrl, vdctrl0, vdctrl4;
413 int line_size, fb_size;
414 int reenable = 0;
415
416 line_size = fb_info->var.xres * (fb_info->var.bits_per_pixel >> 3);
417 fb_size = fb_info->var.yres_virtual * line_size;
418
419 if (fb_size > fb_info->fix.smem_len)
420 return -ENOMEM;
421
422 fb_info->fix.line_length = line_size;
423
424 /*
425 * It seems, you can't re-program the controller if it is still running.
426 * This may lead into shifted pictures (FIFO issue?).
427 * So, first stop the controller and drain its FIFOs
428 */
429 if (host->enabled) {
430 reenable = 1;
431 mxsfb_disable_controller(fb_info);
432 }
433
434 /* clear the FIFOs */
435 writel(CTRL1_FIFO_CLEAR, host->base + LCDC_CTRL1 + REG_SET);
436
437 ctrl = CTRL_BYPASS_COUNT | CTRL_MASTER |
438 CTRL_SET_BUS_WIDTH(host->ld_intf_width);
439
440 switch (fb_info->var.bits_per_pixel) {
441 case 16:
442 dev_dbg(&host->pdev->dev, "Setting up RGB565 mode\n");
443 ctrl |= CTRL_SET_WORD_LENGTH(0);
444 writel(CTRL1_SET_BYTE_PACKAGING(0xf), host->base + LCDC_CTRL1);
445 break;
446 case 32:
447 dev_dbg(&host->pdev->dev, "Setting up RGB888/666 mode\n");
448 ctrl |= CTRL_SET_WORD_LENGTH(3);
449 switch (host->ld_intf_width) {
450 case STMLCDIF_8BIT:
451 dev_dbg(&host->pdev->dev,
452 "Unsupported LCD bus width mapping\n");
453 return -EINVAL;
454 case STMLCDIF_16BIT:
455 case STMLCDIF_18BIT:
456 /* 24 bit to 18 bit mapping */
457 ctrl |= CTRL_DF24; /* ignore the upper 2 bits in
458 * each colour component
459 */
460 break;
461 case STMLCDIF_24BIT:
462 /* real 24 bit */
463 break;
464 }
465 /* do not use packed pixels = one pixel per word instead */
466 writel(CTRL1_SET_BYTE_PACKAGING(0x7), host->base + LCDC_CTRL1);
467 break;
468 default:
469 dev_dbg(&host->pdev->dev, "Unhandled color depth of %u\n",
470 fb_info->var.bits_per_pixel);
471 return -EINVAL;
472 }
473
474 writel(ctrl, host->base + LCDC_CTRL);
475
476 writel(TRANSFER_COUNT_SET_VCOUNT(fb_info->var.yres) |
477 TRANSFER_COUNT_SET_HCOUNT(fb_info->var.xres),
478 host->base + host->devdata->transfer_count);
479
480 vdctrl0 = VDCTRL0_ENABLE_PRESENT | /* always in DOTCLOCK mode */
481 VDCTRL0_VSYNC_PERIOD_UNIT |
482 VDCTRL0_VSYNC_PULSE_WIDTH_UNIT |
483 VDCTRL0_SET_VSYNC_PULSE_WIDTH(fb_info->var.vsync_len);
484 if (fb_info->var.sync & FB_SYNC_HOR_HIGH_ACT)
485 vdctrl0 |= VDCTRL0_HSYNC_ACT_HIGH;
486 if (fb_info->var.sync & FB_SYNC_VERT_HIGH_ACT)
487 vdctrl0 |= VDCTRL0_VSYNC_ACT_HIGH;
488 if (host->sync & MXSFB_SYNC_DATA_ENABLE_HIGH_ACT)
489 vdctrl0 |= VDCTRL0_ENABLE_ACT_HIGH;
490 if (host->sync & MXSFB_SYNC_DOTCLK_FALLING_ACT)
491 vdctrl0 |= VDCTRL0_DOTCLK_ACT_FALLING;
492
493 writel(vdctrl0, host->base + LCDC_VDCTRL0);
494
495 /* frame length in lines */
496 writel(fb_info->var.upper_margin + fb_info->var.vsync_len +
497 fb_info->var.lower_margin + fb_info->var.yres,
498 host->base + LCDC_VDCTRL1);
499
500 /* line length in units of clocks or pixels */
501 writel(set_hsync_pulse_width(host, fb_info->var.hsync_len) |
502 VDCTRL2_SET_HSYNC_PERIOD(fb_info->var.left_margin +
503 fb_info->var.hsync_len + fb_info->var.right_margin +
504 fb_info->var.xres),
505 host->base + LCDC_VDCTRL2);
506
507 writel(SET_HOR_WAIT_CNT(fb_info->var.left_margin +
508 fb_info->var.hsync_len) |
509 SET_VERT_WAIT_CNT(fb_info->var.upper_margin +
510 fb_info->var.vsync_len),
511 host->base + LCDC_VDCTRL3);
512
513 vdctrl4 = SET_DOTCLK_H_VALID_DATA_CNT(fb_info->var.xres);
514 if (mxsfb_is_v4(host))
515 vdctrl4 |= VDCTRL4_SET_DOTCLK_DLY(host->dotclk_delay);
516 writel(vdctrl4, host->base + LCDC_VDCTRL4);
517
518 writel(fb_info->fix.smem_start +
519 fb_info->fix.line_length * fb_info->var.yoffset,
520 host->base + host->devdata->next_buf);
521
522 if (reenable)
523 mxsfb_enable_controller(fb_info);
524
525 return 0;
526 }
527
528 static int mxsfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
529 u_int transp, struct fb_info *fb_info)
530 {
531 unsigned int val;
532 int ret = -EINVAL;
533
534 /*
535 * If greyscale is true, then we convert the RGB value
536 * to greyscale no matter what visual we are using.
537 */
538 if (fb_info->var.grayscale)
539 red = green = blue = (19595 * red + 38470 * green +
540 7471 * blue) >> 16;
541
542 switch (fb_info->fix.visual) {
543 case FB_VISUAL_TRUECOLOR:
544 /*
545 * 12 or 16-bit True Colour. We encode the RGB value
546 * according to the RGB bitfield information.
547 */
548 if (regno < 16) {
549 u32 *pal = fb_info->pseudo_palette;
550
551 val = chan_to_field(red, &fb_info->var.red);
552 val |= chan_to_field(green, &fb_info->var.green);
553 val |= chan_to_field(blue, &fb_info->var.blue);
554
555 pal[regno] = val;
556 ret = 0;
557 }
558 break;
559
560 case FB_VISUAL_STATIC_PSEUDOCOLOR:
561 case FB_VISUAL_PSEUDOCOLOR:
562 break;
563 }
564
565 return ret;
566 }
567
568 static int mxsfb_blank(int blank, struct fb_info *fb_info)
569 {
570 struct mxsfb_info *host = to_imxfb_host(fb_info);
571
572 switch (blank) {
573 case FB_BLANK_POWERDOWN:
574 case FB_BLANK_VSYNC_SUSPEND:
575 case FB_BLANK_HSYNC_SUSPEND:
576 case FB_BLANK_NORMAL:
577 if (host->enabled)
578 mxsfb_disable_controller(fb_info);
579 break;
580
581 case FB_BLANK_UNBLANK:
582 if (!host->enabled)
583 mxsfb_enable_controller(fb_info);
584 break;
585 }
586 return 0;
587 }
588
589 static int mxsfb_pan_display(struct fb_var_screeninfo *var,
590 struct fb_info *fb_info)
591 {
592 struct mxsfb_info *host = to_imxfb_host(fb_info);
593 unsigned offset;
594
595 if (var->xoffset != 0)
596 return -EINVAL;
597
598 offset = fb_info->fix.line_length * var->yoffset;
599
600 /* update on next VSYNC */
601 writel(fb_info->fix.smem_start + offset,
602 host->base + host->devdata->next_buf);
603
604 return 0;
605 }
606
607 static struct fb_ops mxsfb_ops = {
608 .owner = THIS_MODULE,
609 .fb_check_var = mxsfb_check_var,
610 .fb_set_par = mxsfb_set_par,
611 .fb_setcolreg = mxsfb_setcolreg,
612 .fb_blank = mxsfb_blank,
613 .fb_pan_display = mxsfb_pan_display,
614 .fb_fillrect = cfb_fillrect,
615 .fb_copyarea = cfb_copyarea,
616 .fb_imageblit = cfb_imageblit,
617 };
618
619 static int mxsfb_restore_mode(struct mxsfb_info *host)
620 {
621 struct fb_info *fb_info = &host->fb_info;
622 unsigned line_count;
623 unsigned period;
624 unsigned long pa, fbsize;
625 int bits_per_pixel, ofs;
626 u32 transfer_count, vdctrl0, vdctrl2, vdctrl3, vdctrl4, ctrl;
627 struct fb_videomode vmode;
628
629 /* Only restore the mode when the controller is running */
630 ctrl = readl(host->base + LCDC_CTRL);
631 if (!(ctrl & CTRL_RUN))
632 return -EINVAL;
633
634 vdctrl0 = readl(host->base + LCDC_VDCTRL0);
635 vdctrl2 = readl(host->base + LCDC_VDCTRL2);
636 vdctrl3 = readl(host->base + LCDC_VDCTRL3);
637 vdctrl4 = readl(host->base + LCDC_VDCTRL4);
638
639 transfer_count = readl(host->base + host->devdata->transfer_count);
640
641 vmode.xres = TRANSFER_COUNT_GET_HCOUNT(transfer_count);
642 vmode.yres = TRANSFER_COUNT_GET_VCOUNT(transfer_count);
643
644 switch (CTRL_GET_WORD_LENGTH(ctrl)) {
645 case 0:
646 bits_per_pixel = 16;
647 break;
648 case 3:
649 bits_per_pixel = 32;
650 case 1:
651 default:
652 return -EINVAL;
653 }
654
655 fb_info->var.bits_per_pixel = bits_per_pixel;
656
657 vmode.pixclock = KHZ2PICOS(clk_get_rate(host->clk) / 1000U);
658 vmode.hsync_len = get_hsync_pulse_width(host, vdctrl2);
659 vmode.left_margin = GET_HOR_WAIT_CNT(vdctrl3) - vmode.hsync_len;
660 vmode.right_margin = VDCTRL2_GET_HSYNC_PERIOD(vdctrl2) - vmode.hsync_len -
661 vmode.left_margin - vmode.xres;
662 vmode.vsync_len = VDCTRL0_GET_VSYNC_PULSE_WIDTH(vdctrl0);
663 period = readl(host->base + LCDC_VDCTRL1);
664 vmode.upper_margin = GET_VERT_WAIT_CNT(vdctrl3) - vmode.vsync_len;
665 vmode.lower_margin = period - vmode.vsync_len - vmode.upper_margin - vmode.yres;
666
667 vmode.vmode = FB_VMODE_NONINTERLACED;
668
669 vmode.sync = 0;
670 if (vdctrl0 & VDCTRL0_HSYNC_ACT_HIGH)
671 vmode.sync |= FB_SYNC_HOR_HIGH_ACT;
672 if (vdctrl0 & VDCTRL0_VSYNC_ACT_HIGH)
673 vmode.sync |= FB_SYNC_VERT_HIGH_ACT;
674
675 pr_debug("Reconstructed video mode:\n");
676 pr_debug("%dx%d, hsync: %u left: %u, right: %u, vsync: %u, upper: %u, lower: %u\n",
677 vmode.xres, vmode.yres,
678 vmode.hsync_len, vmode.left_margin, vmode.right_margin,
679 vmode.vsync_len, vmode.upper_margin, vmode.lower_margin);
680 pr_debug("pixclk: %ldkHz\n", PICOS2KHZ(vmode.pixclock));
681
682 fb_add_videomode(&vmode, &fb_info->modelist);
683
684 host->ld_intf_width = CTRL_GET_BUS_WIDTH(ctrl);
685 host->dotclk_delay = VDCTRL4_GET_DOTCLK_DLY(vdctrl4);
686
687 fb_info->fix.line_length = vmode.xres * (bits_per_pixel >> 3);
688
689 pa = readl(host->base + host->devdata->cur_buf);
690 fbsize = fb_info->fix.line_length * vmode.yres;
691 if (pa < fb_info->fix.smem_start)
692 return -EINVAL;
693 if (pa + fbsize > fb_info->fix.smem_start + fb_info->fix.smem_len)
694 return -EINVAL;
695 ofs = pa - fb_info->fix.smem_start;
696 if (ofs) {
697 memmove(fb_info->screen_base, fb_info->screen_base + ofs, fbsize);
698 writel(fb_info->fix.smem_start, host->base + host->devdata->next_buf);
699 }
700
701 line_count = fb_info->fix.smem_len / fb_info->fix.line_length;
702 fb_info->fix.ypanstep = 1;
703
704 clk_prepare_enable(host->clk);
705 host->enabled = 1;
706
707 return 0;
708 }
709
710 static int mxsfb_init_fbinfo_dt(struct mxsfb_info *host)
711 {
712 struct fb_info *fb_info = &host->fb_info;
713 struct fb_var_screeninfo *var = &fb_info->var;
714 struct device *dev = &host->pdev->dev;
715 struct device_node *np = host->pdev->dev.of_node;
716 struct device_node *display_np;
717 struct device_node *timings_np;
718 struct display_timings *timings;
719 u32 width;
720 int i;
721 int ret = 0;
722
723 display_np = of_parse_phandle(np, "display", 0);
724 if (!display_np) {
725 dev_err(dev, "failed to find display phandle\n");
726 return -ENOENT;
727 }
728
729 ret = of_property_read_u32(display_np, "bus-width", &width);
730 if (ret < 0) {
731 dev_err(dev, "failed to get property bus-width\n");
732 goto put_display_node;
733 }
734
735 switch (width) {
736 case 8:
737 host->ld_intf_width = STMLCDIF_8BIT;
738 break;
739 case 16:
740 host->ld_intf_width = STMLCDIF_16BIT;
741 break;
742 case 18:
743 host->ld_intf_width = STMLCDIF_18BIT;
744 break;
745 case 24:
746 host->ld_intf_width = STMLCDIF_24BIT;
747 break;
748 default:
749 dev_err(dev, "invalid bus-width value\n");
750 ret = -EINVAL;
751 goto put_display_node;
752 }
753
754 ret = of_property_read_u32(display_np, "bits-per-pixel",
755 &var->bits_per_pixel);
756 if (ret < 0) {
757 dev_err(dev, "failed to get property bits-per-pixel\n");
758 goto put_display_node;
759 }
760
761 timings = of_get_display_timings(display_np);
762 if (!timings) {
763 dev_err(dev, "failed to get display timings\n");
764 ret = -ENOENT;
765 goto put_display_node;
766 }
767
768 timings_np = of_find_node_by_name(display_np,
769 "display-timings");
770 if (!timings_np) {
771 dev_err(dev, "failed to find display-timings node\n");
772 ret = -ENOENT;
773 goto put_display_node;
774 }
775
776 for (i = 0; i < of_get_child_count(timings_np); i++) {
777 struct videomode vm;
778 struct fb_videomode fb_vm;
779
780 ret = videomode_from_timings(timings, &vm, i);
781 if (ret < 0)
782 goto put_timings_node;
783 ret = fb_videomode_from_videomode(&vm, &fb_vm);
784 if (ret < 0)
785 goto put_timings_node;
786
787 if (vm.flags & DISPLAY_FLAGS_DE_HIGH)
788 host->sync |= MXSFB_SYNC_DATA_ENABLE_HIGH_ACT;
789 if (vm.flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE)
790 host->sync |= MXSFB_SYNC_DOTCLK_FALLING_ACT;
791 fb_add_videomode(&fb_vm, &fb_info->modelist);
792 }
793
794 put_timings_node:
795 of_node_put(timings_np);
796 put_display_node:
797 of_node_put(display_np);
798 return ret;
799 }
800
801 static int mxsfb_init_fbinfo(struct mxsfb_info *host)
802 {
803 struct fb_info *fb_info = &host->fb_info;
804 struct fb_var_screeninfo *var = &fb_info->var;
805 dma_addr_t fb_phys;
806 void *fb_virt;
807 unsigned fb_size;
808 int ret;
809
810 fb_info->fbops = &mxsfb_ops;
811 fb_info->flags = FBINFO_FLAG_DEFAULT | FBINFO_READS_FAST;
812 strlcpy(fb_info->fix.id, "mxs", sizeof(fb_info->fix.id));
813 fb_info->fix.type = FB_TYPE_PACKED_PIXELS;
814 fb_info->fix.ypanstep = 1;
815 fb_info->fix.visual = FB_VISUAL_TRUECOLOR,
816 fb_info->fix.accel = FB_ACCEL_NONE;
817
818 ret = mxsfb_init_fbinfo_dt(host);
819 if (ret)
820 return ret;
821
822 var->nonstd = 0;
823 var->activate = FB_ACTIVATE_NOW;
824 var->accel_flags = 0;
825 var->vmode = FB_VMODE_NONINTERLACED;
826
827 /* Memory allocation for framebuffer */
828 fb_size = SZ_2M;
829 fb_virt = alloc_pages_exact(fb_size, GFP_DMA);
830 if (!fb_virt)
831 return -ENOMEM;
832
833 fb_phys = virt_to_phys(fb_virt);
834
835 fb_info->fix.smem_start = fb_phys;
836 fb_info->screen_base = fb_virt;
837 fb_info->screen_size = fb_info->fix.smem_len = fb_size;
838
839 if (mxsfb_restore_mode(host))
840 memset(fb_virt, 0, fb_size);
841
842 return 0;
843 }
844
845 static void mxsfb_free_videomem(struct mxsfb_info *host)
846 {
847 struct fb_info *fb_info = &host->fb_info;
848
849 free_pages_exact(fb_info->screen_base, fb_info->fix.smem_len);
850 }
851
852 static struct platform_device_id mxsfb_devtype[] = {
853 {
854 .name = "imx23-fb",
855 .driver_data = MXSFB_V3,
856 }, {
857 .name = "imx28-fb",
858 .driver_data = MXSFB_V4,
859 }, {
860 /* sentinel */
861 }
862 };
863 MODULE_DEVICE_TABLE(platform, mxsfb_devtype);
864
865 static const struct of_device_id mxsfb_dt_ids[] = {
866 { .compatible = "fsl,imx23-lcdif", .data = &mxsfb_devtype[0], },
867 { .compatible = "fsl,imx28-lcdif", .data = &mxsfb_devtype[1], },
868 { /* sentinel */ }
869 };
870 MODULE_DEVICE_TABLE(of, mxsfb_dt_ids);
871
872 static int mxsfb_probe(struct platform_device *pdev)
873 {
874 const struct of_device_id *of_id =
875 of_match_device(mxsfb_dt_ids, &pdev->dev);
876 struct resource *res;
877 struct mxsfb_info *host;
878 struct fb_info *fb_info;
879 struct fb_modelist *modelist;
880 struct pinctrl *pinctrl;
881 int ret;
882
883 if (of_id)
884 pdev->id_entry = of_id->data;
885
886 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
887 if (!res) {
888 dev_err(&pdev->dev, "Cannot get memory IO resource\n");
889 return -ENODEV;
890 }
891
892 fb_info = framebuffer_alloc(sizeof(struct mxsfb_info), &pdev->dev);
893 if (!fb_info) {
894 dev_err(&pdev->dev, "Failed to allocate fbdev\n");
895 return -ENOMEM;
896 }
897
898 host = to_imxfb_host(fb_info);
899
900 host->base = devm_ioremap_resource(&pdev->dev, res);
901 if (IS_ERR(host->base)) {
902 dev_err(&pdev->dev, "ioremap failed\n");
903 ret = PTR_ERR(host->base);
904 goto fb_release;
905 }
906
907 host->pdev = pdev;
908 platform_set_drvdata(pdev, host);
909
910 host->devdata = &mxsfb_devdata[pdev->id_entry->driver_data];
911
912 pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
913 if (IS_ERR(pinctrl)) {
914 ret = PTR_ERR(pinctrl);
915 goto fb_release;
916 }
917
918 host->clk = devm_clk_get(&host->pdev->dev, NULL);
919 if (IS_ERR(host->clk)) {
920 ret = PTR_ERR(host->clk);
921 goto fb_release;
922 }
923
924 host->reg_lcd = devm_regulator_get(&pdev->dev, "lcd");
925 if (IS_ERR(host->reg_lcd))
926 host->reg_lcd = NULL;
927
928 fb_info->pseudo_palette = devm_kzalloc(&pdev->dev, sizeof(u32) * 16,
929 GFP_KERNEL);
930 if (!fb_info->pseudo_palette) {
931 ret = -ENOMEM;
932 goto fb_release;
933 }
934
935 INIT_LIST_HEAD(&fb_info->modelist);
936
937 ret = mxsfb_init_fbinfo(host);
938 if (ret != 0)
939 goto fb_release;
940
941 modelist = list_first_entry(&fb_info->modelist,
942 struct fb_modelist, list);
943 fb_videomode_to_var(&fb_info->var, &modelist->mode);
944
945 /* init the color fields */
946 mxsfb_check_var(&fb_info->var, fb_info);
947
948 platform_set_drvdata(pdev, fb_info);
949
950 ret = register_framebuffer(fb_info);
951 if (ret != 0) {
952 dev_err(&pdev->dev,"Failed to register framebuffer\n");
953 goto fb_destroy;
954 }
955
956 if (!host->enabled) {
957 writel(0, host->base + LCDC_CTRL);
958 mxsfb_set_par(fb_info);
959 mxsfb_enable_controller(fb_info);
960 }
961
962 dev_info(&pdev->dev, "initialized\n");
963
964 return 0;
965
966 fb_destroy:
967 if (host->enabled)
968 clk_disable_unprepare(host->clk);
969 fb_destroy_modelist(&fb_info->modelist);
970 fb_release:
971 framebuffer_release(fb_info);
972
973 return ret;
974 }
975
976 static int mxsfb_remove(struct platform_device *pdev)
977 {
978 struct fb_info *fb_info = platform_get_drvdata(pdev);
979 struct mxsfb_info *host = to_imxfb_host(fb_info);
980
981 if (host->enabled)
982 mxsfb_disable_controller(fb_info);
983
984 unregister_framebuffer(fb_info);
985 mxsfb_free_videomem(host);
986
987 framebuffer_release(fb_info);
988
989 platform_set_drvdata(pdev, NULL);
990
991 return 0;
992 }
993
994 static void mxsfb_shutdown(struct platform_device *pdev)
995 {
996 struct fb_info *fb_info = platform_get_drvdata(pdev);
997 struct mxsfb_info *host = to_imxfb_host(fb_info);
998
999 /*
1000 * Force stop the LCD controller as keeping it running during reboot
1001 * might interfere with the BootROM's boot mode pads sampling.
1002 */
1003 writel(CTRL_RUN, host->base + LCDC_CTRL + REG_CLR);
1004 }
1005
1006 static struct platform_driver mxsfb_driver = {
1007 .probe = mxsfb_probe,
1008 .remove = mxsfb_remove,
1009 .shutdown = mxsfb_shutdown,
1010 .id_table = mxsfb_devtype,
1011 .driver = {
1012 .name = DRIVER_NAME,
1013 .of_match_table = mxsfb_dt_ids,
1014 },
1015 };
1016
1017 module_platform_driver(mxsfb_driver);
1018
1019 MODULE_DESCRIPTION("Freescale mxs framebuffer driver");
1020 MODULE_AUTHOR("Sascha Hauer, Pengutronix");
1021 MODULE_LICENSE("GPL");
Linux with added FPC-III support