2 * Virtio SCSI HBA driver
4 * Copyright IBM Corp. 2010
5 * Copyright Red Hat, Inc. 2011
8 * Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
9 * Paolo Bonzini <pbonzini@redhat.com>
11 * This work is licensed under the terms of the GNU GPL, version 2 or later.
12 * See the COPYING file in the top-level directory.
16 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
18 #include <linux/module.h>
19 #include <linux/slab.h>
20 #include <linux/mempool.h>
21 #include <linux/virtio.h>
22 #include <linux/virtio_ids.h>
23 #include <linux/virtio_config.h>
24 #include <linux/virtio_scsi.h>
25 #include <linux/cpu.h>
26 #include <scsi/scsi_host.h>
27 #include <scsi/scsi_device.h>
28 #include <scsi/scsi_cmnd.h>
30 #define VIRTIO_SCSI_MEMPOOL_SZ 64
31 #define VIRTIO_SCSI_EVENT_LEN 8
32 #define VIRTIO_SCSI_VQ_BASE 2
34 /* Command queue element */
35 struct virtio_scsi_cmd
{
37 struct completion
*comp
;
39 struct virtio_scsi_cmd_req cmd
;
40 struct virtio_scsi_ctrl_tmf_req tmf
;
41 struct virtio_scsi_ctrl_an_req an
;
44 struct virtio_scsi_cmd_resp cmd
;
45 struct virtio_scsi_ctrl_tmf_resp tmf
;
46 struct virtio_scsi_ctrl_an_resp an
;
47 struct virtio_scsi_event evt
;
49 } ____cacheline_aligned_in_smp
;
51 struct virtio_scsi_event_node
{
52 struct virtio_scsi
*vscsi
;
53 struct virtio_scsi_event event
;
54 struct work_struct work
;
57 struct virtio_scsi_vq
{
65 * Per-target queue state.
67 * This struct holds the data needed by the queue steering policy. When a
68 * target is sent multiple requests, we need to drive them to the same queue so
69 * that FIFO processing order is kept. However, if a target was idle, we can
70 * choose a queue arbitrarily. In this case the queue is chosen according to
71 * the current VCPU, so the driver expects the number of request queues to be
72 * equal to the number of VCPUs. This makes it easy and fast to select the
73 * queue, and also lets the driver optimize the IRQ affinity for the virtqueues
74 * (each virtqueue's affinity is set to the CPU that "owns" the queue).
76 * An interesting effect of this policy is that only writes to req_vq need to
77 * take the tgt_lock. Read can be done outside the lock because:
79 * - writes of req_vq only occur when atomic_inc_return(&tgt->reqs) returns 1.
80 * In that case, no other CPU is reading req_vq: even if they were in
81 * virtscsi_queuecommand_multi, they would be spinning on tgt_lock.
83 * - reads of req_vq only occur when the target is not idle (reqs != 0).
84 * A CPU that enters virtscsi_queuecommand_multi will not modify req_vq.
86 * Similarly, decrements of reqs are never concurrent with writes of req_vq.
87 * Thus they can happen outside the tgt_lock, provided of course we make reqs
90 struct virtio_scsi_target_state
{
91 /* This spinlock never held at the same time as vq_lock. */
94 /* Count of outstanding requests. */
97 /* Currently active virtqueue for requests sent to this target. */
98 struct virtio_scsi_vq
*req_vq
;
101 /* Driver instance state */
103 struct virtio_device
*vdev
;
105 /* Get some buffers ready for event vq */
106 struct virtio_scsi_event_node event_list
[VIRTIO_SCSI_EVENT_LEN
];
110 /* If the affinity hint is set for virtqueues */
111 bool affinity_hint_set
;
113 /* CPU hotplug notifier */
114 struct notifier_block nb
;
116 struct virtio_scsi_vq ctrl_vq
;
117 struct virtio_scsi_vq event_vq
;
118 struct virtio_scsi_vq req_vqs
[];
121 static struct kmem_cache
*virtscsi_cmd_cache
;
122 static mempool_t
*virtscsi_cmd_pool
;
124 static inline struct Scsi_Host
*virtio_scsi_host(struct virtio_device
*vdev
)
129 static void virtscsi_compute_resid(struct scsi_cmnd
*sc
, u32 resid
)
134 if (!scsi_bidi_cmnd(sc
)) {
135 scsi_set_resid(sc
, resid
);
139 scsi_in(sc
)->resid
= min(resid
, scsi_in(sc
)->length
);
140 scsi_out(sc
)->resid
= resid
- scsi_in(sc
)->resid
;
144 * virtscsi_complete_cmd - finish a scsi_cmd and invoke scsi_done
146 * Called with vq_lock held.
148 static void virtscsi_complete_cmd(struct virtio_scsi
*vscsi
, void *buf
)
150 struct virtio_scsi_cmd
*cmd
= buf
;
151 struct scsi_cmnd
*sc
= cmd
->sc
;
152 struct virtio_scsi_cmd_resp
*resp
= &cmd
->resp
.cmd
;
153 struct virtio_scsi_target_state
*tgt
=
154 scsi_target(sc
->device
)->hostdata
;
156 dev_dbg(&sc
->device
->sdev_gendev
,
157 "cmd %p response %u status %#02x sense_len %u\n",
158 sc
, resp
->response
, resp
->status
, resp
->sense_len
);
160 sc
->result
= resp
->status
;
161 virtscsi_compute_resid(sc
, resp
->resid
);
162 switch (resp
->response
) {
163 case VIRTIO_SCSI_S_OK
:
164 set_host_byte(sc
, DID_OK
);
166 case VIRTIO_SCSI_S_OVERRUN
:
167 set_host_byte(sc
, DID_ERROR
);
169 case VIRTIO_SCSI_S_ABORTED
:
170 set_host_byte(sc
, DID_ABORT
);
172 case VIRTIO_SCSI_S_BAD_TARGET
:
173 set_host_byte(sc
, DID_BAD_TARGET
);
175 case VIRTIO_SCSI_S_RESET
:
176 set_host_byte(sc
, DID_RESET
);
178 case VIRTIO_SCSI_S_BUSY
:
179 set_host_byte(sc
, DID_BUS_BUSY
);
181 case VIRTIO_SCSI_S_TRANSPORT_FAILURE
:
182 set_host_byte(sc
, DID_TRANSPORT_DISRUPTED
);
184 case VIRTIO_SCSI_S_TARGET_FAILURE
:
185 set_host_byte(sc
, DID_TARGET_FAILURE
);
187 case VIRTIO_SCSI_S_NEXUS_FAILURE
:
188 set_host_byte(sc
, DID_NEXUS_FAILURE
);
191 scmd_printk(KERN_WARNING
, sc
, "Unknown response %d",
194 case VIRTIO_SCSI_S_FAILURE
:
195 set_host_byte(sc
, DID_ERROR
);
199 WARN_ON(resp
->sense_len
> VIRTIO_SCSI_SENSE_SIZE
);
200 if (sc
->sense_buffer
) {
201 memcpy(sc
->sense_buffer
, resp
->sense
,
202 min_t(u32
, resp
->sense_len
, VIRTIO_SCSI_SENSE_SIZE
));
204 set_driver_byte(sc
, DRIVER_SENSE
);
207 mempool_free(cmd
, virtscsi_cmd_pool
);
210 atomic_dec(&tgt
->reqs
);
213 static void virtscsi_vq_done(struct virtio_scsi
*vscsi
,
214 struct virtio_scsi_vq
*virtscsi_vq
,
215 void (*fn
)(struct virtio_scsi
*vscsi
, void *buf
))
220 struct virtqueue
*vq
= virtscsi_vq
->vq
;
222 spin_lock_irqsave(&virtscsi_vq
->vq_lock
, flags
);
224 virtqueue_disable_cb(vq
);
225 while ((buf
= virtqueue_get_buf(vq
, &len
)) != NULL
)
228 if (unlikely(virtqueue_is_broken(vq
)))
230 } while (!virtqueue_enable_cb(vq
));
231 spin_unlock_irqrestore(&virtscsi_vq
->vq_lock
, flags
);
234 static void virtscsi_req_done(struct virtqueue
*vq
)
236 struct Scsi_Host
*sh
= virtio_scsi_host(vq
->vdev
);
237 struct virtio_scsi
*vscsi
= shost_priv(sh
);
238 int index
= vq
->index
- VIRTIO_SCSI_VQ_BASE
;
239 struct virtio_scsi_vq
*req_vq
= &vscsi
->req_vqs
[index
];
242 * Read req_vq before decrementing the reqs field in
243 * virtscsi_complete_cmd.
247 * CPU #0 virtscsi_queuecommand_multi (CPU #1)
248 * ------------------------------------------------------------
251 * read reqs (reqs = 1)
252 * write reqs (reqs = 0)
253 * increment reqs (reqs = 1)
256 * Possible reordering without barriers:
258 * CPU #0 virtscsi_queuecommand_multi (CPU #1)
259 * ------------------------------------------------------------
261 * read reqs (reqs = 1)
262 * write reqs (reqs = 0)
263 * increment reqs (reqs = 1)
265 * read (wrong) req_vq
267 * We do not need a full smp_rmb, because req_vq is required to get
268 * to tgt->reqs: tgt is &vscsi->tgt[sc->device->id], where sc is stored
269 * in the virtqueue as the user token.
271 smp_read_barrier_depends();
273 virtscsi_vq_done(vscsi
, req_vq
, virtscsi_complete_cmd
);
276 static void virtscsi_poll_requests(struct virtio_scsi
*vscsi
)
280 num_vqs
= vscsi
->num_queues
;
281 for (i
= 0; i
< num_vqs
; i
++)
282 virtscsi_vq_done(vscsi
, &vscsi
->req_vqs
[i
],
283 virtscsi_complete_cmd
);
286 static void virtscsi_complete_free(struct virtio_scsi
*vscsi
, void *buf
)
288 struct virtio_scsi_cmd
*cmd
= buf
;
291 complete_all(cmd
->comp
);
293 mempool_free(cmd
, virtscsi_cmd_pool
);
296 static void virtscsi_ctrl_done(struct virtqueue
*vq
)
298 struct Scsi_Host
*sh
= virtio_scsi_host(vq
->vdev
);
299 struct virtio_scsi
*vscsi
= shost_priv(sh
);
301 virtscsi_vq_done(vscsi
, &vscsi
->ctrl_vq
, virtscsi_complete_free
);
304 static void virtscsi_handle_event(struct work_struct
*work
);
306 static int virtscsi_kick_event(struct virtio_scsi
*vscsi
,
307 struct virtio_scsi_event_node
*event_node
)
310 struct scatterlist sg
;
313 INIT_WORK(&event_node
->work
, virtscsi_handle_event
);
314 sg_init_one(&sg
, &event_node
->event
, sizeof(struct virtio_scsi_event
));
316 spin_lock_irqsave(&vscsi
->event_vq
.vq_lock
, flags
);
318 err
= virtqueue_add_inbuf(vscsi
->event_vq
.vq
, &sg
, 1, event_node
,
321 virtqueue_kick(vscsi
->event_vq
.vq
);
323 spin_unlock_irqrestore(&vscsi
->event_vq
.vq_lock
, flags
);
328 static int virtscsi_kick_event_all(struct virtio_scsi
*vscsi
)
332 for (i
= 0; i
< VIRTIO_SCSI_EVENT_LEN
; i
++) {
333 vscsi
->event_list
[i
].vscsi
= vscsi
;
334 virtscsi_kick_event(vscsi
, &vscsi
->event_list
[i
]);
340 static void virtscsi_cancel_event_work(struct virtio_scsi
*vscsi
)
344 for (i
= 0; i
< VIRTIO_SCSI_EVENT_LEN
; i
++)
345 cancel_work_sync(&vscsi
->event_list
[i
].work
);
348 static void virtscsi_handle_transport_reset(struct virtio_scsi
*vscsi
,
349 struct virtio_scsi_event
*event
)
351 struct scsi_device
*sdev
;
352 struct Scsi_Host
*shost
= virtio_scsi_host(vscsi
->vdev
);
353 unsigned int target
= event
->lun
[1];
354 unsigned int lun
= (event
->lun
[2] << 8) | event
->lun
[3];
356 switch (event
->reason
) {
357 case VIRTIO_SCSI_EVT_RESET_RESCAN
:
358 scsi_add_device(shost
, 0, target
, lun
);
360 case VIRTIO_SCSI_EVT_RESET_REMOVED
:
361 sdev
= scsi_device_lookup(shost
, 0, target
, lun
);
363 scsi_remove_device(sdev
);
364 scsi_device_put(sdev
);
366 pr_err("SCSI device %d 0 %d %d not found\n",
367 shost
->host_no
, target
, lun
);
371 pr_info("Unsupport virtio scsi event reason %x\n", event
->reason
);
375 static void virtscsi_handle_param_change(struct virtio_scsi
*vscsi
,
376 struct virtio_scsi_event
*event
)
378 struct scsi_device
*sdev
;
379 struct Scsi_Host
*shost
= virtio_scsi_host(vscsi
->vdev
);
380 unsigned int target
= event
->lun
[1];
381 unsigned int lun
= (event
->lun
[2] << 8) | event
->lun
[3];
382 u8 asc
= event
->reason
& 255;
383 u8 ascq
= event
->reason
>> 8;
385 sdev
= scsi_device_lookup(shost
, 0, target
, lun
);
387 pr_err("SCSI device %d 0 %d %d not found\n",
388 shost
->host_no
, target
, lun
);
392 /* Handle "Parameters changed", "Mode parameters changed", and
393 "Capacity data has changed". */
394 if (asc
== 0x2a && (ascq
== 0x00 || ascq
== 0x01 || ascq
== 0x09))
395 scsi_rescan_device(&sdev
->sdev_gendev
);
397 scsi_device_put(sdev
);
400 static void virtscsi_handle_event(struct work_struct
*work
)
402 struct virtio_scsi_event_node
*event_node
=
403 container_of(work
, struct virtio_scsi_event_node
, work
);
404 struct virtio_scsi
*vscsi
= event_node
->vscsi
;
405 struct virtio_scsi_event
*event
= &event_node
->event
;
407 if (event
->event
& VIRTIO_SCSI_T_EVENTS_MISSED
) {
408 event
->event
&= ~VIRTIO_SCSI_T_EVENTS_MISSED
;
409 scsi_scan_host(virtio_scsi_host(vscsi
->vdev
));
412 switch (event
->event
) {
413 case VIRTIO_SCSI_T_NO_EVENT
:
415 case VIRTIO_SCSI_T_TRANSPORT_RESET
:
416 virtscsi_handle_transport_reset(vscsi
, event
);
418 case VIRTIO_SCSI_T_PARAM_CHANGE
:
419 virtscsi_handle_param_change(vscsi
, event
);
422 pr_err("Unsupport virtio scsi event %x\n", event
->event
);
424 virtscsi_kick_event(vscsi
, event_node
);
427 static void virtscsi_complete_event(struct virtio_scsi
*vscsi
, void *buf
)
429 struct virtio_scsi_event_node
*event_node
= buf
;
431 schedule_work(&event_node
->work
);
434 static void virtscsi_event_done(struct virtqueue
*vq
)
436 struct Scsi_Host
*sh
= virtio_scsi_host(vq
->vdev
);
437 struct virtio_scsi
*vscsi
= shost_priv(sh
);
439 virtscsi_vq_done(vscsi
, &vscsi
->event_vq
, virtscsi_complete_event
);
443 * virtscsi_add_cmd - add a virtio_scsi_cmd to a virtqueue
444 * @vq : the struct virtqueue we're talking about
445 * @cmd : command structure
446 * @req_size : size of the request buffer
447 * @resp_size : size of the response buffer
448 * @gfp : flags to use for memory allocations
450 static int virtscsi_add_cmd(struct virtqueue
*vq
,
451 struct virtio_scsi_cmd
*cmd
,
452 size_t req_size
, size_t resp_size
, gfp_t gfp
)
454 struct scsi_cmnd
*sc
= cmd
->sc
;
455 struct scatterlist
*sgs
[4], req
, resp
;
456 struct sg_table
*out
, *in
;
457 unsigned out_num
= 0, in_num
= 0;
461 if (sc
&& sc
->sc_data_direction
!= DMA_NONE
) {
462 if (sc
->sc_data_direction
!= DMA_FROM_DEVICE
)
463 out
= &scsi_out(sc
)->table
;
464 if (sc
->sc_data_direction
!= DMA_TO_DEVICE
)
465 in
= &scsi_in(sc
)->table
;
468 /* Request header. */
469 sg_init_one(&req
, &cmd
->req
, req_size
);
470 sgs
[out_num
++] = &req
;
472 /* Data-out buffer. */
474 sgs
[out_num
++] = out
->sgl
;
476 /* Response header. */
477 sg_init_one(&resp
, &cmd
->resp
, resp_size
);
478 sgs
[out_num
+ in_num
++] = &resp
;
482 sgs
[out_num
+ in_num
++] = in
->sgl
;
484 return virtqueue_add_sgs(vq
, sgs
, out_num
, in_num
, cmd
, gfp
);
487 static int virtscsi_kick_cmd(struct virtio_scsi_vq
*vq
,
488 struct virtio_scsi_cmd
*cmd
,
489 size_t req_size
, size_t resp_size
, gfp_t gfp
)
493 bool needs_kick
= false;
495 spin_lock_irqsave(&vq
->vq_lock
, flags
);
496 err
= virtscsi_add_cmd(vq
->vq
, cmd
, req_size
, resp_size
, gfp
);
498 needs_kick
= virtqueue_kick_prepare(vq
->vq
);
500 spin_unlock_irqrestore(&vq
->vq_lock
, flags
);
503 virtqueue_notify(vq
->vq
);
507 static int virtscsi_queuecommand(struct virtio_scsi
*vscsi
,
508 struct virtio_scsi_vq
*req_vq
,
509 struct scsi_cmnd
*sc
)
511 struct virtio_scsi_cmd
*cmd
;
514 struct Scsi_Host
*shost
= virtio_scsi_host(vscsi
->vdev
);
515 BUG_ON(scsi_sg_count(sc
) > shost
->sg_tablesize
);
517 /* TODO: check feature bit and fail if unsupported? */
518 BUG_ON(sc
->sc_data_direction
== DMA_BIDIRECTIONAL
);
520 dev_dbg(&sc
->device
->sdev_gendev
,
521 "cmd %p CDB: %#02x\n", sc
, sc
->cmnd
[0]);
523 ret
= SCSI_MLQUEUE_HOST_BUSY
;
524 cmd
= mempool_alloc(virtscsi_cmd_pool
, GFP_ATOMIC
);
528 memset(cmd
, 0, sizeof(*cmd
));
530 cmd
->req
.cmd
= (struct virtio_scsi_cmd_req
){
532 .lun
[1] = sc
->device
->id
,
533 .lun
[2] = (sc
->device
->lun
>> 8) | 0x40,
534 .lun
[3] = sc
->device
->lun
& 0xff,
535 .tag
= (unsigned long)sc
,
536 .task_attr
= VIRTIO_SCSI_S_SIMPLE
,
541 BUG_ON(sc
->cmd_len
> VIRTIO_SCSI_CDB_SIZE
);
542 memcpy(cmd
->req
.cmd
.cdb
, sc
->cmnd
, sc
->cmd_len
);
544 if (virtscsi_kick_cmd(req_vq
, cmd
,
545 sizeof cmd
->req
.cmd
, sizeof cmd
->resp
.cmd
,
549 mempool_free(cmd
, virtscsi_cmd_pool
);
555 static int virtscsi_queuecommand_single(struct Scsi_Host
*sh
,
556 struct scsi_cmnd
*sc
)
558 struct virtio_scsi
*vscsi
= shost_priv(sh
);
559 struct virtio_scsi_target_state
*tgt
=
560 scsi_target(sc
->device
)->hostdata
;
562 atomic_inc(&tgt
->reqs
);
563 return virtscsi_queuecommand(vscsi
, &vscsi
->req_vqs
[0], sc
);
566 static struct virtio_scsi_vq
*virtscsi_pick_vq(struct virtio_scsi
*vscsi
,
567 struct virtio_scsi_target_state
*tgt
)
569 struct virtio_scsi_vq
*vq
;
573 spin_lock_irqsave(&tgt
->tgt_lock
, flags
);
576 * The memory barrier after atomic_inc_return matches
577 * the smp_read_barrier_depends() in virtscsi_req_done.
579 if (atomic_inc_return(&tgt
->reqs
) > 1)
580 vq
= ACCESS_ONCE(tgt
->req_vq
);
582 queue_num
= smp_processor_id();
583 while (unlikely(queue_num
>= vscsi
->num_queues
))
584 queue_num
-= vscsi
->num_queues
;
586 tgt
->req_vq
= vq
= &vscsi
->req_vqs
[queue_num
];
589 spin_unlock_irqrestore(&tgt
->tgt_lock
, flags
);
593 static int virtscsi_queuecommand_multi(struct Scsi_Host
*sh
,
594 struct scsi_cmnd
*sc
)
596 struct virtio_scsi
*vscsi
= shost_priv(sh
);
597 struct virtio_scsi_target_state
*tgt
=
598 scsi_target(sc
->device
)->hostdata
;
599 struct virtio_scsi_vq
*req_vq
= virtscsi_pick_vq(vscsi
, tgt
);
601 return virtscsi_queuecommand(vscsi
, req_vq
, sc
);
604 static int virtscsi_tmf(struct virtio_scsi
*vscsi
, struct virtio_scsi_cmd
*cmd
)
606 DECLARE_COMPLETION_ONSTACK(comp
);
610 if (virtscsi_kick_cmd(&vscsi
->ctrl_vq
, cmd
,
611 sizeof cmd
->req
.tmf
, sizeof cmd
->resp
.tmf
,
615 wait_for_completion(&comp
);
616 if (cmd
->resp
.tmf
.response
== VIRTIO_SCSI_S_OK
||
617 cmd
->resp
.tmf
.response
== VIRTIO_SCSI_S_FUNCTION_SUCCEEDED
)
621 * The spec guarantees that all requests related to the TMF have
622 * been completed, but the callback might not have run yet if
623 * we're using independent interrupts (e.g. MSI). Poll the
626 * In the abort case, sc->scsi_done will do nothing, because
627 * the block layer must have detected a timeout and as a result
628 * REQ_ATOM_COMPLETE has been set.
630 virtscsi_poll_requests(vscsi
);
633 mempool_free(cmd
, virtscsi_cmd_pool
);
637 static int virtscsi_device_reset(struct scsi_cmnd
*sc
)
639 struct virtio_scsi
*vscsi
= shost_priv(sc
->device
->host
);
640 struct virtio_scsi_cmd
*cmd
;
642 sdev_printk(KERN_INFO
, sc
->device
, "device reset\n");
643 cmd
= mempool_alloc(virtscsi_cmd_pool
, GFP_NOIO
);
647 memset(cmd
, 0, sizeof(*cmd
));
649 cmd
->req
.tmf
= (struct virtio_scsi_ctrl_tmf_req
){
650 .type
= VIRTIO_SCSI_T_TMF
,
651 .subtype
= VIRTIO_SCSI_T_TMF_LOGICAL_UNIT_RESET
,
653 .lun
[1] = sc
->device
->id
,
654 .lun
[2] = (sc
->device
->lun
>> 8) | 0x40,
655 .lun
[3] = sc
->device
->lun
& 0xff,
657 return virtscsi_tmf(vscsi
, cmd
);
660 static int virtscsi_abort(struct scsi_cmnd
*sc
)
662 struct virtio_scsi
*vscsi
= shost_priv(sc
->device
->host
);
663 struct virtio_scsi_cmd
*cmd
;
665 scmd_printk(KERN_INFO
, sc
, "abort\n");
666 cmd
= mempool_alloc(virtscsi_cmd_pool
, GFP_NOIO
);
670 memset(cmd
, 0, sizeof(*cmd
));
672 cmd
->req
.tmf
= (struct virtio_scsi_ctrl_tmf_req
){
673 .type
= VIRTIO_SCSI_T_TMF
,
674 .subtype
= VIRTIO_SCSI_T_TMF_ABORT_TASK
,
676 .lun
[1] = sc
->device
->id
,
677 .lun
[2] = (sc
->device
->lun
>> 8) | 0x40,
678 .lun
[3] = sc
->device
->lun
& 0xff,
679 .tag
= (unsigned long)sc
,
681 return virtscsi_tmf(vscsi
, cmd
);
684 static int virtscsi_target_alloc(struct scsi_target
*starget
)
686 struct virtio_scsi_target_state
*tgt
=
687 kmalloc(sizeof(*tgt
), GFP_KERNEL
);
691 spin_lock_init(&tgt
->tgt_lock
);
692 atomic_set(&tgt
->reqs
, 0);
695 starget
->hostdata
= tgt
;
699 static void virtscsi_target_destroy(struct scsi_target
*starget
)
701 struct virtio_scsi_target_state
*tgt
= starget
->hostdata
;
705 static struct scsi_host_template virtscsi_host_template_single
= {
706 .module
= THIS_MODULE
,
707 .name
= "Virtio SCSI HBA",
708 .proc_name
= "virtio_scsi",
710 .queuecommand
= virtscsi_queuecommand_single
,
711 .eh_abort_handler
= virtscsi_abort
,
712 .eh_device_reset_handler
= virtscsi_device_reset
,
715 .dma_boundary
= UINT_MAX
,
716 .use_clustering
= ENABLE_CLUSTERING
,
717 .target_alloc
= virtscsi_target_alloc
,
718 .target_destroy
= virtscsi_target_destroy
,
721 static struct scsi_host_template virtscsi_host_template_multi
= {
722 .module
= THIS_MODULE
,
723 .name
= "Virtio SCSI HBA",
724 .proc_name
= "virtio_scsi",
726 .queuecommand
= virtscsi_queuecommand_multi
,
727 .eh_abort_handler
= virtscsi_abort
,
728 .eh_device_reset_handler
= virtscsi_device_reset
,
731 .dma_boundary
= UINT_MAX
,
732 .use_clustering
= ENABLE_CLUSTERING
,
733 .target_alloc
= virtscsi_target_alloc
,
734 .target_destroy
= virtscsi_target_destroy
,
737 #define virtscsi_config_get(vdev, fld) \
739 typeof(((struct virtio_scsi_config *)0)->fld) __val; \
740 virtio_cread(vdev, struct virtio_scsi_config, fld, &__val); \
744 #define virtscsi_config_set(vdev, fld, val) \
746 typeof(((struct virtio_scsi_config *)0)->fld) __val = (val); \
747 virtio_cwrite(vdev, struct virtio_scsi_config, fld, &__val); \
750 static void __virtscsi_set_affinity(struct virtio_scsi
*vscsi
, bool affinity
)
755 /* In multiqueue mode, when the number of cpu is equal
756 * to the number of request queues, we let the qeueues
757 * to be private to one cpu by setting the affinity hint
758 * to eliminate the contention.
760 if ((vscsi
->num_queues
== 1 ||
761 vscsi
->num_queues
!= num_online_cpus()) && affinity
) {
762 if (vscsi
->affinity_hint_set
)
770 for_each_online_cpu(cpu
) {
771 virtqueue_set_affinity(vscsi
->req_vqs
[i
].vq
, cpu
);
775 vscsi
->affinity_hint_set
= true;
777 for (i
= 0; i
< vscsi
->num_queues
; i
++) {
778 if (!vscsi
->req_vqs
[i
].vq
)
781 virtqueue_set_affinity(vscsi
->req_vqs
[i
].vq
, -1);
784 vscsi
->affinity_hint_set
= false;
788 static void virtscsi_set_affinity(struct virtio_scsi
*vscsi
, bool affinity
)
791 __virtscsi_set_affinity(vscsi
, affinity
);
795 static int virtscsi_cpu_callback(struct notifier_block
*nfb
,
796 unsigned long action
, void *hcpu
)
798 struct virtio_scsi
*vscsi
= container_of(nfb
, struct virtio_scsi
, nb
);
801 case CPU_ONLINE_FROZEN
:
803 case CPU_DEAD_FROZEN
:
804 __virtscsi_set_affinity(vscsi
, true);
812 static void virtscsi_init_vq(struct virtio_scsi_vq
*virtscsi_vq
,
813 struct virtqueue
*vq
)
815 spin_lock_init(&virtscsi_vq
->vq_lock
);
816 virtscsi_vq
->vq
= vq
;
819 static void virtscsi_scan(struct virtio_device
*vdev
)
821 struct Scsi_Host
*shost
= (struct Scsi_Host
*)vdev
->priv
;
823 scsi_scan_host(shost
);
826 static void virtscsi_remove_vqs(struct virtio_device
*vdev
)
828 struct Scsi_Host
*sh
= virtio_scsi_host(vdev
);
829 struct virtio_scsi
*vscsi
= shost_priv(sh
);
831 virtscsi_set_affinity(vscsi
, false);
833 /* Stop all the virtqueues. */
834 vdev
->config
->reset(vdev
);
836 vdev
->config
->del_vqs(vdev
);
839 static int virtscsi_init(struct virtio_device
*vdev
,
840 struct virtio_scsi
*vscsi
)
845 vq_callback_t
**callbacks
;
847 struct virtqueue
**vqs
;
849 num_vqs
= vscsi
->num_queues
+ VIRTIO_SCSI_VQ_BASE
;
850 vqs
= kmalloc(num_vqs
* sizeof(struct virtqueue
*), GFP_KERNEL
);
851 callbacks
= kmalloc(num_vqs
* sizeof(vq_callback_t
*), GFP_KERNEL
);
852 names
= kmalloc(num_vqs
* sizeof(char *), GFP_KERNEL
);
854 if (!callbacks
|| !vqs
|| !names
) {
859 callbacks
[0] = virtscsi_ctrl_done
;
860 callbacks
[1] = virtscsi_event_done
;
861 names
[0] = "control";
863 for (i
= VIRTIO_SCSI_VQ_BASE
; i
< num_vqs
; i
++) {
864 callbacks
[i
] = virtscsi_req_done
;
865 names
[i
] = "request";
868 /* Discover virtqueues and write information to configuration. */
869 err
= vdev
->config
->find_vqs(vdev
, num_vqs
, vqs
, callbacks
, names
);
873 virtscsi_init_vq(&vscsi
->ctrl_vq
, vqs
[0]);
874 virtscsi_init_vq(&vscsi
->event_vq
, vqs
[1]);
875 for (i
= VIRTIO_SCSI_VQ_BASE
; i
< num_vqs
; i
++)
876 virtscsi_init_vq(&vscsi
->req_vqs
[i
- VIRTIO_SCSI_VQ_BASE
],
879 virtscsi_set_affinity(vscsi
, true);
881 virtscsi_config_set(vdev
, cdb_size
, VIRTIO_SCSI_CDB_SIZE
);
882 virtscsi_config_set(vdev
, sense_size
, VIRTIO_SCSI_SENSE_SIZE
);
884 if (virtio_has_feature(vdev
, VIRTIO_SCSI_F_HOTPLUG
))
885 virtscsi_kick_event_all(vscsi
);
894 virtscsi_remove_vqs(vdev
);
898 static int virtscsi_probe(struct virtio_device
*vdev
)
900 struct Scsi_Host
*shost
;
901 struct virtio_scsi
*vscsi
;
903 u32 sg_elems
, num_targets
;
906 struct scsi_host_template
*hostt
;
908 /* We need to know how many queues before we allocate. */
909 num_queues
= virtscsi_config_get(vdev
, num_queues
) ? : 1;
911 num_targets
= virtscsi_config_get(vdev
, max_target
) + 1;
914 hostt
= &virtscsi_host_template_single
;
916 hostt
= &virtscsi_host_template_multi
;
918 shost
= scsi_host_alloc(hostt
,
919 sizeof(*vscsi
) + sizeof(vscsi
->req_vqs
[0]) * num_queues
);
923 sg_elems
= virtscsi_config_get(vdev
, seg_max
) ?: 1;
924 shost
->sg_tablesize
= sg_elems
;
925 vscsi
= shost_priv(shost
);
927 vscsi
->num_queues
= num_queues
;
930 err
= virtscsi_init(vdev
, vscsi
);
932 goto virtscsi_init_failed
;
934 vscsi
->nb
.notifier_call
= &virtscsi_cpu_callback
;
935 err
= register_hotcpu_notifier(&vscsi
->nb
);
937 pr_err("registering cpu notifier failed\n");
938 goto scsi_add_host_failed
;
941 cmd_per_lun
= virtscsi_config_get(vdev
, cmd_per_lun
) ?: 1;
942 shost
->cmd_per_lun
= min_t(u32
, cmd_per_lun
, shost
->can_queue
);
943 shost
->max_sectors
= virtscsi_config_get(vdev
, max_sectors
) ?: 0xFFFF;
945 /* LUNs > 256 are reported with format 1, so they go in the range
948 shost
->max_lun
= virtscsi_config_get(vdev
, max_lun
) + 1 + 0x4000;
949 shost
->max_id
= num_targets
;
950 shost
->max_channel
= 0;
951 shost
->max_cmd_len
= VIRTIO_SCSI_CDB_SIZE
;
952 err
= scsi_add_host(shost
, &vdev
->dev
);
954 goto scsi_add_host_failed
;
956 * scsi_scan_host() happens in virtscsi_scan() via virtio_driver->scan()
957 * after VIRTIO_CONFIG_S_DRIVER_OK has been set..
961 scsi_add_host_failed
:
962 vdev
->config
->del_vqs(vdev
);
963 virtscsi_init_failed
:
964 scsi_host_put(shost
);
968 static void virtscsi_remove(struct virtio_device
*vdev
)
970 struct Scsi_Host
*shost
= virtio_scsi_host(vdev
);
971 struct virtio_scsi
*vscsi
= shost_priv(shost
);
973 if (virtio_has_feature(vdev
, VIRTIO_SCSI_F_HOTPLUG
))
974 virtscsi_cancel_event_work(vscsi
);
976 scsi_remove_host(shost
);
978 unregister_hotcpu_notifier(&vscsi
->nb
);
980 virtscsi_remove_vqs(vdev
);
981 scsi_host_put(shost
);
984 #ifdef CONFIG_PM_SLEEP
985 static int virtscsi_freeze(struct virtio_device
*vdev
)
987 struct Scsi_Host
*sh
= virtio_scsi_host(vdev
);
988 struct virtio_scsi
*vscsi
= shost_priv(sh
);
990 unregister_hotcpu_notifier(&vscsi
->nb
);
991 virtscsi_remove_vqs(vdev
);
995 static int virtscsi_restore(struct virtio_device
*vdev
)
997 struct Scsi_Host
*sh
= virtio_scsi_host(vdev
);
998 struct virtio_scsi
*vscsi
= shost_priv(sh
);
1001 err
= virtscsi_init(vdev
, vscsi
);
1005 err
= register_hotcpu_notifier(&vscsi
->nb
);
1007 vdev
->config
->del_vqs(vdev
);
1013 static struct virtio_device_id id_table
[] = {
1014 { VIRTIO_ID_SCSI
, VIRTIO_DEV_ANY_ID
},
1018 static unsigned int features
[] = {
1019 VIRTIO_SCSI_F_HOTPLUG
,
1020 VIRTIO_SCSI_F_CHANGE
,
1023 static struct virtio_driver virtio_scsi_driver
= {
1024 .feature_table
= features
,
1025 .feature_table_size
= ARRAY_SIZE(features
),
1026 .driver
.name
= KBUILD_MODNAME
,
1027 .driver
.owner
= THIS_MODULE
,
1028 .id_table
= id_table
,
1029 .probe
= virtscsi_probe
,
1030 .scan
= virtscsi_scan
,
1031 #ifdef CONFIG_PM_SLEEP
1032 .freeze
= virtscsi_freeze
,
1033 .restore
= virtscsi_restore
,
1035 .remove
= virtscsi_remove
,
1038 static int __init
init(void)
1042 virtscsi_cmd_cache
= KMEM_CACHE(virtio_scsi_cmd
, 0);
1043 if (!virtscsi_cmd_cache
) {
1044 pr_err("kmem_cache_create() for virtscsi_cmd_cache failed\n");
1050 mempool_create_slab_pool(VIRTIO_SCSI_MEMPOOL_SZ
,
1051 virtscsi_cmd_cache
);
1052 if (!virtscsi_cmd_pool
) {
1053 pr_err("mempool_create() for virtscsi_cmd_pool failed\n");
1056 ret
= register_virtio_driver(&virtio_scsi_driver
);
1063 if (virtscsi_cmd_pool
) {
1064 mempool_destroy(virtscsi_cmd_pool
);
1065 virtscsi_cmd_pool
= NULL
;
1067 if (virtscsi_cmd_cache
) {
1068 kmem_cache_destroy(virtscsi_cmd_cache
);
1069 virtscsi_cmd_cache
= NULL
;
1074 static void __exit
fini(void)
1076 unregister_virtio_driver(&virtio_scsi_driver
);
1077 mempool_destroy(virtscsi_cmd_pool
);
1078 kmem_cache_destroy(virtscsi_cmd_cache
);
1083 MODULE_DEVICE_TABLE(virtio
, id_table
);
1084 MODULE_DESCRIPTION("Virtio SCSI HBA driver");
1085 MODULE_LICENSE("GPL");