powercap: restrict energy meter to root access
[linux/fpc-iii.git] / drivers / edac / amd64_edac.h
blobdcb5f9481735afbd1b8074ff110e2496bd454658
1 /*
2 * AMD64 class Memory Controller kernel module
4 * Copyright (c) 2009 SoftwareBitMaker.
5 * Copyright (c) 2009-15 Advanced Micro Devices, Inc.
7 * This file may be distributed under the terms of the
8 * GNU General Public License.
9 */
11 #include <linux/module.h>
12 #include <linux/ctype.h>
13 #include <linux/init.h>
14 #include <linux/pci.h>
15 #include <linux/pci_ids.h>
16 #include <linux/slab.h>
17 #include <linux/mmzone.h>
18 #include <linux/edac.h>
19 #include <asm/cpu_device_id.h>
20 #include <asm/msr.h>
21 #include "edac_core.h"
22 #include "mce_amd.h"
24 #define amd64_debug(fmt, arg...) \
25 edac_printk(KERN_DEBUG, "amd64", fmt, ##arg)
27 #define amd64_info(fmt, arg...) \
28 edac_printk(KERN_INFO, "amd64", fmt, ##arg)
30 #define amd64_notice(fmt, arg...) \
31 edac_printk(KERN_NOTICE, "amd64", fmt, ##arg)
33 #define amd64_warn(fmt, arg...) \
34 edac_printk(KERN_WARNING, "amd64", fmt, ##arg)
36 #define amd64_err(fmt, arg...) \
37 edac_printk(KERN_ERR, "amd64", fmt, ##arg)
39 #define amd64_mc_warn(mci, fmt, arg...) \
40 edac_mc_chipset_printk(mci, KERN_WARNING, "amd64", fmt, ##arg)
42 #define amd64_mc_err(mci, fmt, arg...) \
43 edac_mc_chipset_printk(mci, KERN_ERR, "amd64", fmt, ##arg)
46 * Throughout the comments in this code, the following terms are used:
48 * SysAddr, DramAddr, and InputAddr
50 * These terms come directly from the amd64 documentation
51 * (AMD publication #26094). They are defined as follows:
53 * SysAddr:
54 * This is a physical address generated by a CPU core or a device
55 * doing DMA. If generated by a CPU core, a SysAddr is the result of
56 * a virtual to physical address translation by the CPU core's address
57 * translation mechanism (MMU).
59 * DramAddr:
60 * A DramAddr is derived from a SysAddr by subtracting an offset that
61 * depends on which node the SysAddr maps to and whether the SysAddr
62 * is within a range affected by memory hoisting. The DRAM Base
63 * (section 3.4.4.1) and DRAM Limit (section 3.4.4.2) registers
64 * determine which node a SysAddr maps to.
66 * If the DRAM Hole Address Register (DHAR) is enabled and the SysAddr
67 * is within the range of addresses specified by this register, then
68 * a value x from the DHAR is subtracted from the SysAddr to produce a
69 * DramAddr. Here, x represents the base address for the node that
70 * the SysAddr maps to plus an offset due to memory hoisting. See
71 * section 3.4.8 and the comments in amd64_get_dram_hole_info() and
72 * sys_addr_to_dram_addr() below for more information.
74 * If the SysAddr is not affected by the DHAR then a value y is
75 * subtracted from the SysAddr to produce a DramAddr. Here, y is the
76 * base address for the node that the SysAddr maps to. See section
77 * 3.4.4 and the comments in sys_addr_to_dram_addr() below for more
78 * information.
80 * InputAddr:
81 * A DramAddr is translated to an InputAddr before being passed to the
82 * memory controller for the node that the DramAddr is associated
83 * with. The memory controller then maps the InputAddr to a csrow.
84 * If node interleaving is not in use, then the InputAddr has the same
85 * value as the DramAddr. Otherwise, the InputAddr is produced by
86 * discarding the bits used for node interleaving from the DramAddr.
87 * See section 3.4.4 for more information.
89 * The memory controller for a given node uses its DRAM CS Base and
90 * DRAM CS Mask registers to map an InputAddr to a csrow. See
91 * sections 3.5.4 and 3.5.5 for more information.
94 #define EDAC_AMD64_VERSION "3.4.0"
95 #define EDAC_MOD_STR "amd64_edac"
97 /* Extended Model from CPUID, for CPU Revision numbers */
98 #define K8_REV_D 1
99 #define K8_REV_E 2
100 #define K8_REV_F 4
102 /* Hardware limit on ChipSelect rows per MC and processors per system */
103 #define NUM_CHIPSELECTS 8
104 #define DRAM_RANGES 8
106 #define ON true
107 #define OFF false
110 * PCI-defined configuration space registers
112 #define PCI_DEVICE_ID_AMD_15H_NB_F1 0x1601
113 #define PCI_DEVICE_ID_AMD_15H_NB_F2 0x1602
114 #define PCI_DEVICE_ID_AMD_15H_M30H_NB_F1 0x141b
115 #define PCI_DEVICE_ID_AMD_15H_M30H_NB_F2 0x141c
116 #define PCI_DEVICE_ID_AMD_15H_M60H_NB_F1 0x1571
117 #define PCI_DEVICE_ID_AMD_15H_M60H_NB_F2 0x1572
118 #define PCI_DEVICE_ID_AMD_16H_NB_F1 0x1531
119 #define PCI_DEVICE_ID_AMD_16H_NB_F2 0x1532
120 #define PCI_DEVICE_ID_AMD_16H_M30H_NB_F1 0x1581
121 #define PCI_DEVICE_ID_AMD_16H_M30H_NB_F2 0x1582
124 * Function 1 - Address Map
126 #define DRAM_BASE_LO 0x40
127 #define DRAM_LIMIT_LO 0x44
130 * F15 M30h D18F1x2[1C:00]
132 #define DRAM_CONT_BASE 0x200
133 #define DRAM_CONT_LIMIT 0x204
136 * F15 M30h D18F1x2[4C:40]
138 #define DRAM_CONT_HIGH_OFF 0x240
140 #define dram_rw(pvt, i) ((u8)(pvt->ranges[i].base.lo & 0x3))
141 #define dram_intlv_sel(pvt, i) ((u8)((pvt->ranges[i].lim.lo >> 8) & 0x7))
142 #define dram_dst_node(pvt, i) ((u8)(pvt->ranges[i].lim.lo & 0x7))
144 #define DHAR 0xf0
145 #define dhar_mem_hoist_valid(pvt) ((pvt)->dhar & BIT(1))
146 #define dhar_base(pvt) ((pvt)->dhar & 0xff000000)
147 #define k8_dhar_offset(pvt) (((pvt)->dhar & 0x0000ff00) << 16)
149 /* NOTE: Extra mask bit vs K8 */
150 #define f10_dhar_offset(pvt) (((pvt)->dhar & 0x0000ff80) << 16)
152 #define DCT_CFG_SEL 0x10C
154 #define DRAM_LOCAL_NODE_BASE 0x120
155 #define DRAM_LOCAL_NODE_LIM 0x124
157 #define DRAM_BASE_HI 0x140
158 #define DRAM_LIMIT_HI 0x144
162 * Function 2 - DRAM controller
164 #define DCSB0 0x40
165 #define DCSB1 0x140
166 #define DCSB_CS_ENABLE BIT(0)
168 #define DCSM0 0x60
169 #define DCSM1 0x160
171 #define csrow_enabled(i, dct, pvt) ((pvt)->csels[(dct)].csbases[(i)] & DCSB_CS_ENABLE)
173 #define DRAM_CONTROL 0x78
175 #define DBAM0 0x80
176 #define DBAM1 0x180
178 /* Extract the DIMM 'type' on the i'th DIMM from the DBAM reg value passed */
179 #define DBAM_DIMM(i, reg) ((((reg) >> (4*(i)))) & 0xF)
181 #define DBAM_MAX_VALUE 11
183 #define DCLR0 0x90
184 #define DCLR1 0x190
185 #define REVE_WIDTH_128 BIT(16)
186 #define WIDTH_128 BIT(11)
188 #define DCHR0 0x94
189 #define DCHR1 0x194
190 #define DDR3_MODE BIT(8)
192 #define DCT_SEL_LO 0x110
193 #define dct_high_range_enabled(pvt) ((pvt)->dct_sel_lo & BIT(0))
194 #define dct_interleave_enabled(pvt) ((pvt)->dct_sel_lo & BIT(2))
196 #define dct_ganging_enabled(pvt) ((boot_cpu_data.x86 == 0x10) && ((pvt)->dct_sel_lo & BIT(4)))
198 #define dct_data_intlv_enabled(pvt) ((pvt)->dct_sel_lo & BIT(5))
199 #define dct_memory_cleared(pvt) ((pvt)->dct_sel_lo & BIT(10))
201 #define SWAP_INTLV_REG 0x10c
203 #define DCT_SEL_HI 0x114
205 #define F15H_M60H_SCRCTRL 0x1C8
208 * Function 3 - Misc Control
210 #define NBCTL 0x40
212 #define NBCFG 0x44
213 #define NBCFG_CHIPKILL BIT(23)
214 #define NBCFG_ECC_ENABLE BIT(22)
216 /* F3x48: NBSL */
217 #define F10_NBSL_EXT_ERR_ECC 0x8
218 #define NBSL_PP_OBS 0x2
220 #define SCRCTRL 0x58
222 #define F10_ONLINE_SPARE 0xB0
223 #define online_spare_swap_done(pvt, c) (((pvt)->online_spare >> (1 + 2 * (c))) & 0x1)
224 #define online_spare_bad_dramcs(pvt, c) (((pvt)->online_spare >> (4 + 4 * (c))) & 0x7)
226 #define F10_NB_ARRAY_ADDR 0xB8
227 #define F10_NB_ARRAY_DRAM BIT(31)
229 /* Bits [2:1] are used to select 16-byte section within a 64-byte cacheline */
230 #define SET_NB_ARRAY_ADDR(section) (((section) & 0x3) << 1)
232 #define F10_NB_ARRAY_DATA 0xBC
233 #define F10_NB_ARR_ECC_WR_REQ BIT(17)
234 #define SET_NB_DRAM_INJECTION_WRITE(inj) \
235 (BIT(((inj.word) & 0xF) + 20) | \
236 F10_NB_ARR_ECC_WR_REQ | inj.bit_map)
237 #define SET_NB_DRAM_INJECTION_READ(inj) \
238 (BIT(((inj.word) & 0xF) + 20) | \
239 BIT(16) | inj.bit_map)
242 #define NBCAP 0xE8
243 #define NBCAP_CHIPKILL BIT(4)
244 #define NBCAP_SECDED BIT(3)
245 #define NBCAP_DCT_DUAL BIT(0)
247 #define EXT_NB_MCA_CFG 0x180
249 /* MSRs */
250 #define MSR_MCGCTL_NBE BIT(4)
252 enum amd_families {
253 K8_CPUS = 0,
254 F10_CPUS,
255 F15_CPUS,
256 F15_M30H_CPUS,
257 F15_M60H_CPUS,
258 F16_CPUS,
259 F16_M30H_CPUS,
260 NUM_FAMILIES,
263 /* Error injection control structure */
264 struct error_injection {
265 u32 section;
266 u32 word;
267 u32 bit_map;
270 /* low and high part of PCI config space regs */
271 struct reg_pair {
272 u32 lo, hi;
276 * See F1x[1, 0][7C:40] DRAM Base/Limit Registers
278 struct dram_range {
279 struct reg_pair base;
280 struct reg_pair lim;
283 /* A DCT chip selects collection */
284 struct chip_select {
285 u32 csbases[NUM_CHIPSELECTS];
286 u8 b_cnt;
288 u32 csmasks[NUM_CHIPSELECTS];
289 u8 m_cnt;
292 struct amd64_pvt {
293 struct low_ops *ops;
295 /* pci_device handles which we utilize */
296 struct pci_dev *F1, *F2, *F3;
298 u16 mc_node_id; /* MC index of this MC node */
299 u8 fam; /* CPU family */
300 u8 model; /* ... model */
301 u8 stepping; /* ... stepping */
303 int ext_model; /* extended model value of this node */
304 int channel_count;
306 /* Raw registers */
307 u32 dclr0; /* DRAM Configuration Low DCT0 reg */
308 u32 dclr1; /* DRAM Configuration Low DCT1 reg */
309 u32 dchr0; /* DRAM Configuration High DCT0 reg */
310 u32 dchr1; /* DRAM Configuration High DCT1 reg */
311 u32 nbcap; /* North Bridge Capabilities */
312 u32 nbcfg; /* F10 North Bridge Configuration */
313 u32 ext_nbcfg; /* Extended F10 North Bridge Configuration */
314 u32 dhar; /* DRAM Hoist reg */
315 u32 dbam0; /* DRAM Base Address Mapping reg for DCT0 */
316 u32 dbam1; /* DRAM Base Address Mapping reg for DCT1 */
318 /* one for each DCT */
319 struct chip_select csels[2];
321 /* DRAM base and limit pairs F1x[78,70,68,60,58,50,48,40] */
322 struct dram_range ranges[DRAM_RANGES];
324 u64 top_mem; /* top of memory below 4GB */
325 u64 top_mem2; /* top of memory above 4GB */
327 u32 dct_sel_lo; /* DRAM Controller Select Low */
328 u32 dct_sel_hi; /* DRAM Controller Select High */
329 u32 online_spare; /* On-Line spare Reg */
331 /* x4 or x8 syndromes in use */
332 u8 ecc_sym_sz;
334 /* place to store error injection parameters prior to issue */
335 struct error_injection injection;
337 /* cache the dram_type */
338 enum mem_type dram_type;
341 enum err_codes {
342 DECODE_OK = 0,
343 ERR_NODE = -1,
344 ERR_CSROW = -2,
345 ERR_CHANNEL = -3,
348 struct err_info {
349 int err_code;
350 struct mem_ctl_info *src_mci;
351 int csrow;
352 int channel;
353 u16 syndrome;
354 u32 page;
355 u32 offset;
358 static inline u64 get_dram_base(struct amd64_pvt *pvt, u8 i)
360 u64 addr = ((u64)pvt->ranges[i].base.lo & 0xffff0000) << 8;
362 if (boot_cpu_data.x86 == 0xf)
363 return addr;
365 return (((u64)pvt->ranges[i].base.hi & 0x000000ff) << 40) | addr;
368 static inline u64 get_dram_limit(struct amd64_pvt *pvt, u8 i)
370 u64 lim = (((u64)pvt->ranges[i].lim.lo & 0xffff0000) << 8) | 0x00ffffff;
372 if (boot_cpu_data.x86 == 0xf)
373 return lim;
375 return (((u64)pvt->ranges[i].lim.hi & 0x000000ff) << 40) | lim;
378 static inline u16 extract_syndrome(u64 status)
380 return ((status >> 47) & 0xff) | ((status >> 16) & 0xff00);
383 static inline u8 dct_sel_interleave_addr(struct amd64_pvt *pvt)
385 if (pvt->fam == 0x15 && pvt->model >= 0x30)
386 return (((pvt->dct_sel_hi >> 9) & 0x1) << 2) |
387 ((pvt->dct_sel_lo >> 6) & 0x3);
389 return ((pvt)->dct_sel_lo >> 6) & 0x3;
392 * per-node ECC settings descriptor
394 struct ecc_settings {
395 u32 old_nbctl;
396 bool nbctl_valid;
398 struct flags {
399 unsigned long nb_mce_enable:1;
400 unsigned long nb_ecc_prev:1;
401 } flags;
404 #ifdef CONFIG_EDAC_DEBUG
405 extern const struct attribute_group amd64_edac_dbg_group;
406 #endif
408 #ifdef CONFIG_EDAC_AMD64_ERROR_INJECTION
409 extern const struct attribute_group amd64_edac_inj_group;
410 #endif
413 * Each of the PCI Device IDs types have their own set of hardware accessor
414 * functions and per device encoding/decoding logic.
416 struct low_ops {
417 int (*early_channel_count) (struct amd64_pvt *pvt);
418 void (*map_sysaddr_to_csrow) (struct mem_ctl_info *mci, u64 sys_addr,
419 struct err_info *);
420 int (*dbam_to_cs) (struct amd64_pvt *pvt, u8 dct,
421 unsigned cs_mode, int cs_mask_nr);
424 struct amd64_family_type {
425 const char *ctl_name;
426 u16 f1_id, f2_id;
427 struct low_ops ops;
430 int __amd64_read_pci_cfg_dword(struct pci_dev *pdev, int offset,
431 u32 *val, const char *func);
432 int __amd64_write_pci_cfg_dword(struct pci_dev *pdev, int offset,
433 u32 val, const char *func);
435 #define amd64_read_pci_cfg(pdev, offset, val) \
436 __amd64_read_pci_cfg_dword(pdev, offset, val, __func__)
438 #define amd64_write_pci_cfg(pdev, offset, val) \
439 __amd64_write_pci_cfg_dword(pdev, offset, val, __func__)
441 int amd64_get_dram_hole_info(struct mem_ctl_info *mci, u64 *hole_base,
442 u64 *hole_offset, u64 *hole_size);
444 #define to_mci(k) container_of(k, struct mem_ctl_info, dev)
446 /* Injection helpers */
447 static inline void disable_caches(void *dummy)
449 write_cr0(read_cr0() | X86_CR0_CD);
450 wbinvd();
453 static inline void enable_caches(void *dummy)
455 write_cr0(read_cr0() & ~X86_CR0_CD);
458 static inline u8 dram_intlv_en(struct amd64_pvt *pvt, unsigned int i)
460 if (pvt->fam == 0x15 && pvt->model >= 0x30) {
461 u32 tmp;
462 amd64_read_pci_cfg(pvt->F1, DRAM_CONT_LIMIT, &tmp);
463 return (u8) tmp & 0xF;
465 return (u8) (pvt->ranges[i].base.lo >> 8) & 0x7;
468 static inline u8 dhar_valid(struct amd64_pvt *pvt)
470 if (pvt->fam == 0x15 && pvt->model >= 0x30) {
471 u32 tmp;
472 amd64_read_pci_cfg(pvt->F1, DRAM_CONT_BASE, &tmp);
473 return (tmp >> 1) & BIT(0);
475 return (pvt)->dhar & BIT(0);
478 static inline u32 dct_sel_baseaddr(struct amd64_pvt *pvt)
480 if (pvt->fam == 0x15 && pvt->model >= 0x30) {
481 u32 tmp;
482 amd64_read_pci_cfg(pvt->F1, DRAM_CONT_BASE, &tmp);
483 return (tmp >> 11) & 0x1FFF;
485 return (pvt)->dct_sel_lo & 0xFFFFF800;