arch/arm/mach-omap2/board-3430sdp.c

   1 /*
   2  * linux/arch/arm/mach-omap2/board-3430sdp.c
   3  *
   4  * Copyright (C) 2007 Texas Instruments
   5  *
   6  * Modified from mach-omap2/board-generic.c
   7  *
   8  * Initial code: Syed Mohammed Khasim
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License version 2 as
  12  * published by the Free Software Foundation.
  13  */
  14
  15 #include <linux/kernel.h>
  16 #include <linux/init.h>
  17 #include <linux/platform_device.h>
  18 #include <linux/delay.h>
  19 #include <linux/input.h>
  20 #include <linux/spi/spi.h>
  21 #include <linux/spi/ads7846.h>
  22 #include <linux/i2c/twl4030.h>
  23 #include <linux/regulator/machine.h>
  24 #include <linux/io.h>
  25 #include <linux/gpio.h>
  26
  27 #include <mach/hardware.h>
  28 #include <asm/mach-types.h>
  29 #include <asm/mach/arch.h>
  30 #include <asm/mach/map.h>
  31
  32 #include <mach/mcspi.h>
  33 #include <mach/mux.h>
  34 #include <mach/board.h>
  35 #include <mach/usb.h>
  36 #include <mach/common.h>
  37 #include <mach/dma.h>
  38 #include <mach/gpmc.h>
  39
  40 #include <mach/control.h>
  41 #include <mach/keypad.h>
  42 #include <mach/gpmc-smc91x.h>
  43
  44 #include "sdram-qimonda-hyb18m512160af-6.h"
  45 #include "mmc-twl4030.h"
  46
  47 #define CONFIG_DISABLE_HFCLK 1
  48
  49 #define SDP3430_TS_GPIO_IRQ_SDPV1       3
  50 #define SDP3430_TS_GPIO_IRQ_SDPV2       2
  51
  52 #define ENABLE_VAUX3_DEDICATED  0x03
  53 #define ENABLE_VAUX3_DEV_GRP    0x20
  54
  55 #define TWL4030_MSECURE_GPIO 22
  56
  57 static int sdp3430_keymap[] = {
  58         KEY(0, 0, KEY_LEFT),
  59         KEY(0, 1, KEY_RIGHT),
  60         KEY(0, 2, KEY_A),
  61         KEY(0, 3, KEY_B),
  62         KEY(0, 4, KEY_C),
  63         KEY(1, 0, KEY_DOWN),
  64         KEY(1, 1, KEY_UP),
  65         KEY(1, 2, KEY_E),
  66         KEY(1, 3, KEY_F),
  67         KEY(1, 4, KEY_G),
  68         KEY(2, 0, KEY_ENTER),
  69         KEY(2, 1, KEY_I),
  70         KEY(2, 2, KEY_J),
  71         KEY(2, 3, KEY_K),
  72         KEY(2, 4, KEY_3),
  73         KEY(3, 0, KEY_M),
  74         KEY(3, 1, KEY_N),
  75         KEY(3, 2, KEY_O),
  76         KEY(3, 3, KEY_P),
  77         KEY(3, 4, KEY_Q),
  78         KEY(4, 0, KEY_R),
  79         KEY(4, 1, KEY_4),
  80         KEY(4, 2, KEY_T),
  81         KEY(4, 3, KEY_U),
  82         KEY(4, 4, KEY_D),
  83         KEY(5, 0, KEY_V),
  84         KEY(5, 1, KEY_W),
  85         KEY(5, 2, KEY_L),
  86         KEY(5, 3, KEY_S),
  87         KEY(5, 4, KEY_H),
  88         0
  89 };
  90
  91 static struct twl4030_keypad_data sdp3430_kp_data = {
  92         .rows           = 5,
  93         .cols           = 6,
  94         .keymap         = sdp3430_keymap,
  95         .keymapsize     = ARRAY_SIZE(sdp3430_keymap),
  96         .rep            = 1,
  97 };
  98
  99 static int ts_gpio;     /* Needed for ads7846_get_pendown_state */
 100
 101 /**
 102  * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq
 103  *
 104  * @return - void. If request gpio fails then Flag KERN_ERR.
 105  */
 106 static void ads7846_dev_init(void)
 107 {
 108         if (gpio_request(ts_gpio, "ADS7846 pendown") < 0) {
 109                 printk(KERN_ERR "can't get ads746 pen down GPIO\n");
 110                 return;
 111         }
 112
 113         gpio_direction_input(ts_gpio);
 114
 115         omap_set_gpio_debounce(ts_gpio, 1);
 116         omap_set_gpio_debounce_time(ts_gpio, 0xa);
 117 }
 118
 119 static int ads7846_get_pendown_state(void)
 120 {
 121         return !gpio_get_value(ts_gpio);
 122 }
 123
 124 static struct ads7846_platform_data tsc2046_config __initdata = {
 125         .get_pendown_state      = ads7846_get_pendown_state,
 126         .keep_vref_on           = 1,
 127 };
 128
 129
 130 static struct omap2_mcspi_device_config tsc2046_mcspi_config = {
 131         .turbo_mode     = 0,
 132         .single_channel = 1,    /* 0: slave, 1: master */
 133 };
 134
 135 static struct spi_board_info sdp3430_spi_board_info[] __initdata = {
 136         [0] = {
 137                 /*
 138                  * TSC2046 operates at a max freqency of 2MHz, so
 139                  * operate slightly below at 1.5MHz
 140                  */
 141                 .modalias               = "ads7846",
 142                 .bus_num                = 1,
 143                 .chip_select            = 0,
 144                 .max_speed_hz           = 1500000,
 145                 .controller_data        = &tsc2046_mcspi_config,
 146                 .irq                    = 0,
 147                 .platform_data          = &tsc2046_config,
 148         },
 149 };
 150
 151 static struct platform_device sdp3430_lcd_device = {
 152         .name           = "sdp2430_lcd",
 153         .id             = -1,
 154 };
 155
 156 static struct regulator_consumer_supply sdp3430_vdac_supply = {
 157         .supply         = "vdac",
 158         .dev            = &sdp3430_lcd_device.dev,
 159 };
 160
 161 static struct regulator_consumer_supply sdp3430_vdvi_supply = {
 162         .supply         = "vdvi",
 163         .dev            = &sdp3430_lcd_device.dev,
 164 };
 165
 166 static struct platform_device *sdp3430_devices[] __initdata = {
 167         &sdp3430_lcd_device,
 168 };
 169
 170 static void __init omap_3430sdp_init_irq(void)
 171 {
 172         omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL);
 173         omap_init_irq();
 174         omap_gpio_init();
 175 }
 176
 177 static struct omap_uart_config sdp3430_uart_config __initdata = {
 178         .enabled_uarts  = ((1 << 0) | (1 << 1) | (1 << 2)),
 179 };
 180
 181 static struct omap_lcd_config sdp3430_lcd_config __initdata = {
 182         .ctrl_name      = "internal",
 183 };
 184
 185 static struct omap_board_config_kernel sdp3430_config[] __initdata = {
 186         { OMAP_TAG_UART,        &sdp3430_uart_config },
 187         { OMAP_TAG_LCD,         &sdp3430_lcd_config },
 188 };
 189
 190 static int sdp3430_batt_table[] = {
 191 /* 0 C*/
 192 30800, 29500, 28300, 27100,
 193 26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
 194 17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
 195 11600, 11200, 10800, 10400, 10000, 9630,   9280,   8950,   8620,   8310,
 196 8020,   7730,   7460,   7200,   6950,   6710,   6470,   6250,   6040,   5830,
 197 5640,   5450,   5260,   5090,   4920,   4760,   4600,   4450,   4310,   4170,
 198 4040,   3910,   3790,   3670,   3550
 199 };
 200
 201 static struct twl4030_bci_platform_data sdp3430_bci_data = {
 202         .battery_tmp_tbl        = sdp3430_batt_table,
 203         .tblsize                = ARRAY_SIZE(sdp3430_batt_table),
 204 };
 205
 206 static struct twl4030_hsmmc_info mmc[] = {
 207         {
 208                 .mmc            = 1,
 209                 /* 8 bits (default) requires S6.3 == ON,
 210                  * so the SIM card isn't used; else 4 bits.
 211                  */
 212                 .wires          = 8,
 213                 .gpio_wp        = 4,
 214         },
 215         {
 216                 .mmc            = 2,
 217                 .wires          = 8,
 218                 .gpio_wp        = 7,
 219         },
 220         {}      /* Terminator */
 221 };
 222
 223 static struct regulator_consumer_supply sdp3430_vmmc1_supply = {
 224         .supply                 = "vmmc",
 225 };
 226
 227 static struct regulator_consumer_supply sdp3430_vsim_supply = {
 228         .supply                 = "vmmc_aux",
 229 };
 230
 231 static struct regulator_consumer_supply sdp3430_vmmc2_supply = {
 232         .supply                 = "vmmc",
 233 };
 234
 235 static int sdp3430_twl_gpio_setup(struct device *dev,
 236                 unsigned gpio, unsigned ngpio)
 237 {
 238         /* gpio + 0 is "mmc0_cd" (input/IRQ),
 239          * gpio + 1 is "mmc1_cd" (input/IRQ)
 240          */
 241         mmc[0].gpio_cd = gpio + 0;
 242         mmc[1].gpio_cd = gpio + 1;
 243         twl4030_mmc_init(mmc);
 244
 245         /* link regulators to MMC adapters ... we "know" the
 246          * regulators will be set up only *after* we return.
 247          */
 248         sdp3430_vmmc1_supply.dev = mmc[0].dev;
 249         sdp3430_vsim_supply.dev = mmc[0].dev;
 250         sdp3430_vmmc2_supply.dev = mmc[1].dev;
 251
 252         /* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */
 253         gpio_request(gpio + 7, "sub_lcd_en_bkl");
 254         gpio_direction_output(gpio + 7, 0);
 255
 256         /* gpio + 15 is "sub_lcd_nRST" (output) */
 257         gpio_request(gpio + 15, "sub_lcd_nRST");
 258         gpio_direction_output(gpio + 15, 0);
 259
 260         return 0;
 261 }
 262
 263 static struct twl4030_gpio_platform_data sdp3430_gpio_data = {
 264         .gpio_base      = OMAP_MAX_GPIO_LINES,
 265         .irq_base       = TWL4030_GPIO_IRQ_BASE,
 266         .irq_end        = TWL4030_GPIO_IRQ_END,
 267         .pulldowns      = BIT(2) | BIT(6) | BIT(8) | BIT(13)
 268                                 | BIT(16) | BIT(17),
 269         .setup          = sdp3430_twl_gpio_setup,
 270 };
 271
 272 static struct twl4030_usb_data sdp3430_usb_data = {
 273         .usb_mode       = T2_USB_MODE_ULPI,
 274 };
 275
 276 static struct twl4030_madc_platform_data sdp3430_madc_data = {
 277         .irq_line       = 1,
 278 };
 279
 280 /*
 281  * Apply all the fixed voltages since most versions of U-Boot
 282  * don't bother with that initialization.
 283  */
 284
 285 /* VAUX1 for mainboard (irda and sub-lcd) */
 286 static struct regulator_init_data sdp3430_vaux1 = {
 287         .constraints = {
 288                 .min_uV                 = 2800000,
 289                 .max_uV                 = 2800000,
 290                 .apply_uV               = true,
 291                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 292                                         | REGULATOR_MODE_STANDBY,
 293                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
 294                                         | REGULATOR_CHANGE_STATUS,
 295         },
 296 };
 297
 298 /* VAUX2 for camera module */
 299 static struct regulator_init_data sdp3430_vaux2 = {
 300         .constraints = {
 301                 .min_uV                 = 2800000,
 302                 .max_uV                 = 2800000,
 303                 .apply_uV               = true,
 304                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 305                                         | REGULATOR_MODE_STANDBY,
 306                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
 307                                         | REGULATOR_CHANGE_STATUS,
 308         },
 309 };
 310
 311 /* VAUX3 for LCD board */
 312 static struct regulator_init_data sdp3430_vaux3 = {
 313         .constraints = {
 314                 .min_uV                 = 2800000,
 315                 .max_uV                 = 2800000,
 316                 .apply_uV               = true,
 317                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 318                                         | REGULATOR_MODE_STANDBY,
 319                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
 320                                         | REGULATOR_CHANGE_STATUS,
 321         },
 322 };
 323
 324 /* VAUX4 for OMAP VDD_CSI2 (camera) */
 325 static struct regulator_init_data sdp3430_vaux4 = {
 326         .constraints = {
 327                 .min_uV                 = 1800000,
 328                 .max_uV                 = 1800000,
 329                 .apply_uV               = true,
 330                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 331                                         | REGULATOR_MODE_STANDBY,
 332                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
 333                                         | REGULATOR_CHANGE_STATUS,
 334         },
 335 };
 336
 337 /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
 338 static struct regulator_init_data sdp3430_vmmc1 = {
 339         .constraints = {
 340                 .min_uV                 = 1850000,
 341                 .max_uV                 = 3150000,
 342                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 343                                         | REGULATOR_MODE_STANDBY,
 344                 .valid_ops_mask         = REGULATOR_CHANGE_VOLTAGE
 345                                         | REGULATOR_CHANGE_MODE
 346                                         | REGULATOR_CHANGE_STATUS,
 347         },
 348         .num_consumer_supplies  = 1,
 349         .consumer_supplies      = &sdp3430_vmmc1_supply,
 350 };
 351
 352 /* VMMC2 for MMC2 card */
 353 static struct regulator_init_data sdp3430_vmmc2 = {
 354         .constraints = {
 355                 .min_uV                 = 1850000,
 356                 .max_uV                 = 1850000,
 357                 .apply_uV               = true,
 358                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 359                                         | REGULATOR_MODE_STANDBY,
 360                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
 361                                         | REGULATOR_CHANGE_STATUS,
 362         },
 363         .num_consumer_supplies  = 1,
 364         .consumer_supplies      = &sdp3430_vmmc2_supply,
 365 };
 366
 367 /* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
 368 static struct regulator_init_data sdp3430_vsim = {
 369         .constraints = {
 370                 .min_uV                 = 1800000,
 371                 .max_uV                 = 3000000,
 372                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 373                                         | REGULATOR_MODE_STANDBY,
 374                 .valid_ops_mask         = REGULATOR_CHANGE_VOLTAGE
 375                                         | REGULATOR_CHANGE_MODE
 376                                         | REGULATOR_CHANGE_STATUS,
 377         },
 378         .num_consumer_supplies  = 1,
 379         .consumer_supplies      = &sdp3430_vsim_supply,
 380 };
 381
 382 /* VDAC for DSS driving S-Video */
 383 static struct regulator_init_data sdp3430_vdac = {
 384         .constraints = {
 385                 .min_uV                 = 1800000,
 386                 .max_uV                 = 1800000,
 387                 .apply_uV               = true,
 388                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 389                                         | REGULATOR_MODE_STANDBY,
 390                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
 391                                         | REGULATOR_CHANGE_STATUS,
 392         },
 393         .num_consumer_supplies  = 1,
 394         .consumer_supplies      = &sdp3430_vdac_supply,
 395 };
 396
 397 /* VPLL2 for digital video outputs */
 398 static struct regulator_init_data sdp3430_vpll2 = {
 399         .constraints = {
 400                 .name                   = "VDVI",
 401                 .min_uV                 = 1800000,
 402                 .max_uV                 = 1800000,
 403                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 404                                         | REGULATOR_MODE_STANDBY,
 405                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
 406                                         | REGULATOR_CHANGE_STATUS,
 407         },
 408         .num_consumer_supplies  = 1,
 409         .consumer_supplies      = &sdp3430_vdvi_supply,
 410 };
 411
 412 static struct twl4030_platform_data sdp3430_twldata = {
 413         .irq_base       = TWL4030_IRQ_BASE,
 414         .irq_end        = TWL4030_IRQ_END,
 415
 416         /* platform_data for children goes here */
 417         .bci            = &sdp3430_bci_data,
 418         .gpio           = &sdp3430_gpio_data,
 419         .madc           = &sdp3430_madc_data,
 420         .keypad         = &sdp3430_kp_data,
 421         .usb            = &sdp3430_usb_data,
 422
 423         .vaux1          = &sdp3430_vaux1,
 424         .vaux2          = &sdp3430_vaux2,
 425         .vaux3          = &sdp3430_vaux3,
 426         .vaux4          = &sdp3430_vaux4,
 427         .vmmc1          = &sdp3430_vmmc1,
 428         .vmmc2          = &sdp3430_vmmc2,
 429         .vsim           = &sdp3430_vsim,
 430         .vdac           = &sdp3430_vdac,
 431         .vpll2          = &sdp3430_vpll2,
 432 };
 433
 434 static struct i2c_board_info __initdata sdp3430_i2c_boardinfo[] = {
 435         {
 436                 I2C_BOARD_INFO("twl4030", 0x48),
 437                 .flags = I2C_CLIENT_WAKE,
 438                 .irq = INT_34XX_SYS_NIRQ,
 439                 .platform_data = &sdp3430_twldata,
 440         },
 441 };
 442
 443 static int __init omap3430_i2c_init(void)
 444 {
 445         /* i2c1 for PMIC only */
 446         omap_register_i2c_bus(1, 2600, sdp3430_i2c_boardinfo,
 447                         ARRAY_SIZE(sdp3430_i2c_boardinfo));
 448         /* i2c2 on camera connector (for sensor control) and optional isp1301 */
 449         omap_register_i2c_bus(2, 400, NULL, 0);
 450         /* i2c3 on display connector (for DVI, tfp410) */
 451         omap_register_i2c_bus(3, 400, NULL, 0);
 452         return 0;
 453 }
 454
 455 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
 456
 457 static struct omap_smc91x_platform_data board_smc91x_data = {
 458         .cs             = 3,
 459         .flags          = GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |
 460                                 IORESOURCE_IRQ_LOWLEVEL,
 461 };
 462
 463 static void __init board_smc91x_init(void)
 464 {
 465         if (omap_rev() > OMAP3430_REV_ES1_0)
 466                 board_smc91x_data.gpio_irq = 6;
 467         else
 468                 board_smc91x_data.gpio_irq = 29;
 469
 470         gpmc_smc91x_init(&board_smc91x_data);
 471 }
 472
 473 #else
 474
 475 static inline void board_smc91x_init(void)
 476 {
 477 }
 478
 479 #endif
 480
 481 static void __init omap_3430sdp_init(void)
 482 {
 483         omap3430_i2c_init();
 484         platform_add_devices(sdp3430_devices, ARRAY_SIZE(sdp3430_devices));
 485         omap_board_config = sdp3430_config;
 486         omap_board_config_size = ARRAY_SIZE(sdp3430_config);
 487         if (omap_rev() > OMAP3430_REV_ES1_0)
 488                 ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV2;
 489         else
 490                 ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV1;
 491         sdp3430_spi_board_info[0].irq = gpio_to_irq(ts_gpio);
 492         spi_register_board_info(sdp3430_spi_board_info,
 493                                 ARRAY_SIZE(sdp3430_spi_board_info));
 494         ads7846_dev_init();
 495         omap_serial_init();
 496         usb_musb_init();
 497         board_smc91x_init();
 498 }
 499
 500 static void __init omap_3430sdp_map_io(void)
 501 {
 502         omap2_set_globals_343x();
 503         omap2_map_common_io();
 504 }
 505
 506 MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
 507         /* Maintainer: Syed Khasim - Texas Instruments Inc */
 508         .phys_io        = 0x48000000,
 509         .io_pg_offst    = ((0xd8000000) >> 18) & 0xfffc,
 510         .boot_params    = 0x80000100,
 511         .map_io         = omap_3430sdp_map_io,
 512         .init_irq       = omap_3430sdp_init_irq,
 513         .init_machine   = omap_3430sdp_init,
 514         .timer          = &omap_timer,
 515 MACHINE_END