Linux 2.6.31.8
[linux/fpc-iii.git] / arch / arm / mach-pxa / eseries.c
blobc60dadf847a624da6cc34da40bb61c61654e947e
1 /*
2 * Hardware definitions for the Toshiba eseries PDAs
4 * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
6 * This file is licensed under
7 * the terms of the GNU General Public License version 2. This program
8 * is licensed "as is" without any warranty of any kind, whether express
9 * or implied.
13 #include <linux/kernel.h>
14 #include <linux/init.h>
15 #include <linux/gpio.h>
16 #include <linux/delay.h>
17 #include <linux/platform_device.h>
19 #include <asm/setup.h>
20 #include <asm/mach/arch.h>
21 #include <asm/mach-types.h>
23 #include <mach/pxa25x.h>
24 #include <mach/eseries-gpio.h>
25 #include <mach/udc.h>
26 #include <mach/irda.h>
28 #include "generic.h"
29 #include "clock.h"
31 /* Only e800 has 128MB RAM */
32 void __init eseries_fixup(struct machine_desc *desc,
33 struct tag *tags, char **cmdline, struct meminfo *mi)
35 mi->nr_banks=1;
36 mi->bank[0].start = 0xa0000000;
37 mi->bank[0].node = 0;
38 if (machine_is_e800())
39 mi->bank[0].size = (128*1024*1024);
40 else
41 mi->bank[0].size = (64*1024*1024);
44 struct pxa2xx_udc_mach_info e7xx_udc_mach_info = {
45 .gpio_vbus = GPIO_E7XX_USB_DISC,
46 .gpio_pullup = GPIO_E7XX_USB_PULLUP,
47 .gpio_pullup_inverted = 1
50 static void e7xx_irda_transceiver_mode(struct device *dev, int mode)
52 if (mode & IR_OFF) {
53 gpio_set_value(GPIO_E7XX_IR_OFF, 1);
54 pxa2xx_transceiver_mode(dev, mode);
55 } else {
56 pxa2xx_transceiver_mode(dev, mode);
57 gpio_set_value(GPIO_E7XX_IR_OFF, 0);
61 int e7xx_irda_init(void)
63 int ret;
65 ret = gpio_request(GPIO_E7XX_IR_OFF, "IrDA power");
66 if (ret)
67 goto out;
69 ret = gpio_direction_output(GPIO_E7XX_IR_OFF, 0);
70 if (ret)
71 goto out;
73 e7xx_irda_transceiver_mode(NULL, IR_SIRMODE | IR_OFF);
74 out:
75 return ret;
78 static void e7xx_irda_shutdown(struct device *dev)
80 e7xx_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
81 gpio_free(GPIO_E7XX_IR_OFF);
84 struct pxaficp_platform_data e7xx_ficp_platform_data = {
85 .transceiver_cap = IR_SIRMODE | IR_OFF,
86 .transceiver_mode = e7xx_irda_transceiver_mode,
87 .shutdown = e7xx_irda_shutdown,
90 int eseries_tmio_enable(struct platform_device *dev)
92 /* Reset - bring SUSPEND high before PCLR */
93 gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
94 gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 0);
95 msleep(1);
96 gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 1);
97 msleep(1);
98 gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 1);
99 msleep(1);
100 return 0;
103 int eseries_tmio_disable(struct platform_device *dev)
105 gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
106 gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 0);
107 return 0;
110 int eseries_tmio_suspend(struct platform_device *dev)
112 gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
113 return 0;
116 int eseries_tmio_resume(struct platform_device *dev)
118 gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 1);
119 msleep(1);
120 return 0;
123 void eseries_get_tmio_gpios(void)
125 gpio_request(GPIO_ESERIES_TMIO_SUSPEND, NULL);
126 gpio_request(GPIO_ESERIES_TMIO_PCLR, NULL);
127 gpio_direction_output(GPIO_ESERIES_TMIO_SUSPEND, 0);
128 gpio_direction_output(GPIO_ESERIES_TMIO_PCLR, 0);
131 /* TMIO controller uses the same resources on all e-series machines. */
132 struct resource eseries_tmio_resources[] = {
133 [0] = {
134 .start = PXA_CS4_PHYS,
135 .end = PXA_CS4_PHYS + 0x1fffff,
136 .flags = IORESOURCE_MEM,
138 [1] = {
139 .start = IRQ_GPIO(GPIO_ESERIES_TMIO_IRQ),
140 .end = IRQ_GPIO(GPIO_ESERIES_TMIO_IRQ),
141 .flags = IORESOURCE_IRQ,
145 /* Some e-series hardware cannot control the 32K clock */
146 static void clk_32k_dummy(struct clk *clk)
150 static const struct clkops clk_32k_dummy_ops = {
151 .enable = clk_32k_dummy,
152 .disable = clk_32k_dummy,
155 static struct clk tmio_dummy_clk = {
156 .ops = &clk_32k_dummy_ops,
157 .rate = 32768,
160 static struct clk_lookup eseries_clkregs[] = {
161 INIT_CLKREG(&tmio_dummy_clk, NULL, "CLK_CK32K"),
164 void eseries_register_clks(void)
166 clks_register(eseries_clkregs, ARRAY_SIZE(eseries_clkregs));