Linux 2.6.31.8

[linux/fpc-iii.git] / arch / arm / mach-sa1100 / generic.c

/*
 * linux/arch/arm/mach-sa1100/generic.c
 *
 * Author: Nicolas Pitre
 *
 * Code common to all SA11x0 machines.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/cpufreq.h>
#include <linux/ioport.h>
#include <linux/sched.h>        /* just for sched_clock() - funny that */
#include <linux/platform_device.h>
#include <linux/cnt32_to_63.h>

#include <asm/div64.h>
#include <mach/hardware.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
#include <asm/irq.h>
#include <asm/gpio.h>

#include "generic.h"

unsigned int reset_status;
EXPORT_SYMBOL(reset_status);

#define NR_FREQS        16

/*
 * This table is setup for a 3.6864MHz Crystal.
 */
static const unsigned short cclk_frequency_100khz[NR_FREQS] = {
         590,   /*  59.0 MHz */
         737,   /*  73.7 MHz */
         885,   /*  88.5 MHz */
        1032,   /* 103.2 MHz */
        1180,   /* 118.0 MHz */
        1327,   /* 132.7 MHz */
        1475,   /* 147.5 MHz */
        1622,   /* 162.2 MHz */
        1769,   /* 176.9 MHz */
        1917,   /* 191.7 MHz */
        2064,   /* 206.4 MHz */
        2212,   /* 221.2 MHz */
        2359,   /* 235.9 MHz */
        2507,   /* 250.7 MHz */
        2654,   /* 265.4 MHz */
        2802    /* 280.2 MHz */
};

#if defined(CONFIG_CPU_FREQ_SA1100) || defined(CONFIG_CPU_FREQ_SA1110)
/* rounds up(!)  */
unsigned int sa11x0_freq_to_ppcr(unsigned int khz)
{
        int i;

        khz /= 100;

        for (i = 0; i < NR_FREQS; i++)
                if (cclk_frequency_100khz[i] >= khz)
                        break;

        return i;
}

unsigned int sa11x0_ppcr_to_freq(unsigned int idx)
{
        unsigned int freq = 0;
        if (idx < NR_FREQS)
                freq = cclk_frequency_100khz[idx] * 100;
        return freq;
}


/* make sure that only the "userspace" governor is run -- anything else wouldn't make sense on
 * this platform, anyway.
 */
int sa11x0_verify_speed(struct cpufreq_policy *policy)
{
        unsigned int tmp;
        if (policy->cpu)
                return -EINVAL;

        cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);

        /* make sure that at least one frequency is within the policy */
        tmp = cclk_frequency_100khz[sa11x0_freq_to_ppcr(policy->min)] * 100;
        if (tmp > policy->max)
                policy->max = tmp;

        cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);

        return 0;
}

unsigned int sa11x0_getspeed(unsigned int cpu)
{
        if (cpu)
                return 0;
        return cclk_frequency_100khz[PPCR & 0xf] * 100;
}

#else
/*
 * We still need to provide this so building without cpufreq works.
 */
unsigned int cpufreq_get(unsigned int cpu)
{
        return cclk_frequency_100khz[PPCR & 0xf] * 100;
}
EXPORT_SYMBOL(cpufreq_get);
#endif

/*
 * This is the SA11x0 sched_clock implementation.  This has
 * a resolution of 271ns, and a maximum value of 32025597s (370 days).
 *
 * The return value is guaranteed to be monotonic in that range as
 * long as there is always less than 582 seconds between successive
 * calls to this function.
 *
 *  ( * 1E9 / 3686400 => * 78125 / 288)
 */
unsigned long long sched_clock(void)
{
        unsigned long long v = cnt32_to_63(OSCR);

        /* the <<1 gets rid of the cnt_32_to_63 top bit saving on a bic insn */
        v *= 78125<<1;
        do_div(v, 288<<1);

        return v;
}

/*
 * Default power-off for SA1100
 */
static void sa1100_power_off(void)
{
        mdelay(100);
        local_irq_disable();
        /* disable internal oscillator, float CS lines */
        PCFR = (PCFR_OPDE | PCFR_FP | PCFR_FS);
        /* enable wake-up on GPIO0 (Assabet...) */
        PWER = GFER = GRER = 1;
        /*
         * set scratchpad to zero, just in case it is used as a
         * restart address by the bootloader.
         */
        PSPR = 0;
        /* enter sleep mode */
        PMCR = PMCR_SF;
}

static struct resource sa11x0udc_resources[] = {
        [0] = {
                .start  = 0x80000000,
                .end    = 0x8000ffff,
                .flags  = IORESOURCE_MEM,
        },
};

static u64 sa11x0udc_dma_mask = 0xffffffffUL;

static struct platform_device sa11x0udc_device = {
        .name           = "sa11x0-udc",
        .id             = -1,
        .dev            = {
                .dma_mask = &sa11x0udc_dma_mask,
                .coherent_dma_mask = 0xffffffff,
        },
        .num_resources  = ARRAY_SIZE(sa11x0udc_resources),
        .resource       = sa11x0udc_resources,
};

static struct resource sa11x0uart1_resources[] = {
        [0] = {
                .start  = 0x80010000,
                .end    = 0x8001ffff,
                .flags  = IORESOURCE_MEM,
        },
};

static struct platform_device sa11x0uart1_device = {
        .name           = "sa11x0-uart",
        .id             = 1,
        .num_resources  = ARRAY_SIZE(sa11x0uart1_resources),
        .resource       = sa11x0uart1_resources,
};

static struct resource sa11x0uart3_resources[] = {
        [0] = {
                .start  = 0x80050000,
                .end    = 0x8005ffff,
                .flags  = IORESOURCE_MEM,
        },
};

static struct platform_device sa11x0uart3_device = {
        .name           = "sa11x0-uart",
        .id             = 3,
        .num_resources  = ARRAY_SIZE(sa11x0uart3_resources),
        .resource       = sa11x0uart3_resources,
};

static struct resource sa11x0mcp_resources[] = {
        [0] = {
                .start  = 0x80060000,
                .end    = 0x8006ffff,
                .flags  = IORESOURCE_MEM,
        },
};

static u64 sa11x0mcp_dma_mask = 0xffffffffUL;

static struct platform_device sa11x0mcp_device = {
        .name           = "sa11x0-mcp",
        .id             = -1,
        .dev = {
                .dma_mask = &sa11x0mcp_dma_mask,
                .coherent_dma_mask = 0xffffffff,
        },
        .num_resources  = ARRAY_SIZE(sa11x0mcp_resources),
        .resource       = sa11x0mcp_resources,
};

void sa11x0_set_mcp_data(struct mcp_plat_data *data)
{
        sa11x0mcp_device.dev.platform_data = data;
}

static struct resource sa11x0ssp_resources[] = {
        [0] = {
                .start  = 0x80070000,
                .end    = 0x8007ffff,
                .flags  = IORESOURCE_MEM,
        },
};

static u64 sa11x0ssp_dma_mask = 0xffffffffUL;

static struct platform_device sa11x0ssp_device = {
        .name           = "sa11x0-ssp",
        .id             = -1,
        .dev = {
                .dma_mask = &sa11x0ssp_dma_mask,
                .coherent_dma_mask = 0xffffffff,
        },
        .num_resources  = ARRAY_SIZE(sa11x0ssp_resources),
        .resource       = sa11x0ssp_resources,
};

static struct resource sa11x0fb_resources[] = {
        [0] = {
                .start  = 0xb0100000,
                .end    = 0xb010ffff,
                .flags  = IORESOURCE_MEM,
        },
        [1] = {
                .start  = IRQ_LCD,
                .end    = IRQ_LCD,
                .flags  = IORESOURCE_IRQ,
        },
};

static struct platform_device sa11x0fb_device = {
        .name           = "sa11x0-fb",
        .id             = -1,
        .dev = {
                .coherent_dma_mask = 0xffffffff,
        },
        .num_resources  = ARRAY_SIZE(sa11x0fb_resources),
        .resource       = sa11x0fb_resources,
};

static struct platform_device sa11x0pcmcia_device = {
        .name           = "sa11x0-pcmcia",
        .id             = -1,
};

static struct platform_device sa11x0mtd_device = {
        .name           = "sa1100-mtd",
        .id             = -1,
};

void sa11x0_set_flash_data(struct flash_platform_data *flash,
                           struct resource *res, int nr)
{
        flash->name = "sa1100";
        sa11x0mtd_device.dev.platform_data = flash;
        sa11x0mtd_device.resource = res;
        sa11x0mtd_device.num_resources = nr;
}

static struct resource sa11x0ir_resources[] = {
        {
                .start  = __PREG(Ser2UTCR0),
                .end    = __PREG(Ser2UTCR0) + 0x24 - 1,
                .flags  = IORESOURCE_MEM,
        }, {
                .start  = __PREG(Ser2HSCR0),
                .end    = __PREG(Ser2HSCR0) + 0x1c - 1,
                .flags  = IORESOURCE_MEM,
        }, {
                .start  = __PREG(Ser2HSCR2),
                .end    = __PREG(Ser2HSCR2) + 0x04 - 1,
                .flags  = IORESOURCE_MEM,
        }, {
                .start  = IRQ_Ser2ICP,
                .end    = IRQ_Ser2ICP,
                .flags  = IORESOURCE_IRQ,
        }
};

static struct platform_device sa11x0ir_device = {
        .name           = "sa11x0-ir",
        .id             = -1,
        .num_resources  = ARRAY_SIZE(sa11x0ir_resources),
        .resource       = sa11x0ir_resources,
};

void sa11x0_set_irda_data(struct irda_platform_data *irda)
{
        sa11x0ir_device.dev.platform_data = irda;
}

static struct platform_device sa11x0rtc_device = {
        .name           = "sa1100-rtc",
        .id             = -1,
};

static struct platform_device *sa11x0_devices[] __initdata = {
        &sa11x0udc_device,
        &sa11x0uart1_device,
        &sa11x0uart3_device,
        &sa11x0mcp_device,
        &sa11x0ssp_device,
        &sa11x0pcmcia_device,
        &sa11x0fb_device,
        &sa11x0mtd_device,
        &sa11x0rtc_device,
};

static int __init sa1100_init(void)
{
        pm_power_off = sa1100_power_off;

        if (sa11x0ir_device.dev.platform_data)
                platform_device_register(&sa11x0ir_device);

        return platform_add_devices(sa11x0_devices, ARRAY_SIZE(sa11x0_devices));
}

arch_initcall(sa1100_init);

void (*sa1100fb_backlight_power)(int on);
void (*sa1100fb_lcd_power)(int on);

EXPORT_SYMBOL(sa1100fb_backlight_power);
EXPORT_SYMBOL(sa1100fb_lcd_power);


/*
 * Common I/O mapping:
 *
 * Typically, static virtual address mappings are as follow:
 *
 * 0xf0000000-0xf3ffffff:       miscellaneous stuff (CPLDs, etc.)
 * 0xf4000000-0xf4ffffff:       SA-1111
 * 0xf5000000-0xf5ffffff:       reserved (used by cache flushing area)
 * 0xf6000000-0xfffeffff:       reserved (internal SA1100 IO defined above)
 * 0xffff0000-0xffff0fff:       SA1100 exception vectors
 * 0xffff2000-0xffff2fff:       Minicache copy_user_page area
 *
 * Below 0xe8000000 is reserved for vm allocation.
 *
 * The machine specific code must provide the extra mapping beside the
 * default mapping provided here.
 */

static struct map_desc standard_io_desc[] __initdata = {
        {       /* PCM */
                .virtual        =  0xf8000000,
                .pfn            = __phys_to_pfn(0x80000000),
                .length         = 0x00100000,
                .type           = MT_DEVICE
        }, {    /* SCM */
                .virtual        =  0xfa000000,
                .pfn            = __phys_to_pfn(0x90000000),
                .length         = 0x00100000,
                .type           = MT_DEVICE
        }, {    /* MER */
                .virtual        =  0xfc000000,
                .pfn            = __phys_to_pfn(0xa0000000),
                .length         = 0x00100000,
                .type           = MT_DEVICE
        }, {    /* LCD + DMA */
                .virtual        =  0xfe000000,
                .pfn            = __phys_to_pfn(0xb0000000),
                .length         = 0x00200000,
                .type           = MT_DEVICE
        },
};

void __init sa1100_map_io(void)
{
        iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
}

/*
 * Disable the memory bus request/grant signals on the SA1110 to
 * ensure that we don't receive spurious memory requests.  We set
 * the MBGNT signal false to ensure the SA1111 doesn't own the
 * SDRAM bus.
 */
void __init sa1110_mb_disable(void)
{
        unsigned long flags;

        local_irq_save(flags);
        
        PGSR &= ~GPIO_MBGNT;
        GPCR = GPIO_MBGNT;
        GPDR = (GPDR & ~GPIO_MBREQ) | GPIO_MBGNT;

        GAFR &= ~(GPIO_MBGNT | GPIO_MBREQ);

        local_irq_restore(flags);
}

/*
 * If the system is going to use the SA-1111 DMA engines, set up
 * the memory bus request/grant pins.
 */
void __devinit sa1110_mb_enable(void)
{
        unsigned long flags;

        local_irq_save(flags);

        PGSR &= ~GPIO_MBGNT;
        GPCR = GPIO_MBGNT;
        GPDR = (GPDR & ~GPIO_MBREQ) | GPIO_MBGNT;

        GAFR |= (GPIO_MBGNT | GPIO_MBREQ);
        TUCR |= TUCR_MR;

        local_irq_restore(flags);
}