arch/powerpc/sysdev/tsi108_pci.c

   1 /*
   2  * Common routines for Tundra Semiconductor TSI108 host bridge.
   3  *
   4  * 2004-2005 (c) Tundra Semiconductor Corp.
   5  * Author: Alex Bounine (alexandreb@tundra.com)
   6  * Author: Roy Zang (tie-fei.zang@freescale.com)
   7  *         Add pci interrupt router host
   8  *
   9  * This program is free software; you can redistribute it and/or modify it
  10  * under the terms of the GNU General Public License as published by the Free
  11  * Software Foundation; either version 2 of the License, or (at your option)
  12  * any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful, but WITHOUT
  15  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  16  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  17  * more details.
  18  *
  19  * You should have received a copy of the GNU General Public License along with
  20  * this program; if not, write to the Free Software Foundation, Inc., 59
  21  * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  22  */
  23
  24 #include <linux/kernel.h>
  25 #include <linux/init.h>
  26 #include <linux/pci.h>
  27 #include <linux/irq.h>
  28 #include <linux/interrupt.h>
  29
  30 #include <asm/byteorder.h>
  31 #include <asm/io.h>
  32 #include <asm/irq.h>
  33 #include <asm/uaccess.h>
  34 #include <asm/machdep.h>
  35 #include <asm/pci-bridge.h>
  36 #include <asm/tsi108.h>
  37 #include <asm/tsi108_pci.h>
  38 #include <asm/tsi108_irq.h>
  39 #include <asm/prom.h>
  40
  41 #undef DEBUG
  42 #ifdef DEBUG
  43 #define DBG(x...) printk(x)
  44 #else
  45 #define DBG(x...)
  46 #endif
  47
  48 #define tsi_mk_config_addr(bus, devfunc, offset) \
  49         ((((bus)<<16) | ((devfunc)<<8) | (offset & 0xfc)) + tsi108_pci_cfg_base)
  50
  51 u32 tsi108_pci_cfg_base;
  52 static u32 tsi108_pci_cfg_phys;
  53 u32 tsi108_csr_vir_base;
  54 static struct irq_domain *pci_irq_host;
  55
  56 extern u32 get_vir_csrbase(void);
  57 extern u32 tsi108_read_reg(u32 reg_offset);
  58 extern void tsi108_write_reg(u32 reg_offset, u32 val);
  59
  60 int
  61 tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfunc,
  62                            int offset, int len, u32 val)
  63 {
  64         volatile unsigned char *cfg_addr;
  65         struct pci_controller *hose = pci_bus_to_host(bus);
  66
  67         if (ppc_md.pci_exclude_device)
  68                 if (ppc_md.pci_exclude_device(hose, bus->number, devfunc))
  69                         return PCIBIOS_DEVICE_NOT_FOUND;
  70
  71         cfg_addr = (unsigned char *)(tsi_mk_config_addr(bus->number,
  72                                                         devfunc, offset) |
  73                                                         (offset & 0x03));
  74
  75 #ifdef DEBUG
  76         printk("PCI CFG write : ");
  77         printk("%d:0x%x:0x%x ", bus->number, devfunc, offset);
  78         printk("%d ADDR=0x%08x ", len, (uint) cfg_addr);
  79         printk("data = 0x%08x\n", val);
  80 #endif
  81
  82         switch (len) {
  83         case 1:
  84                 out_8((u8 *) cfg_addr, val);
  85                 break;
  86         case 2:
  87                 out_le16((u16 *) cfg_addr, val);
  88                 break;
  89         default:
  90                 out_le32((u32 *) cfg_addr, val);
  91                 break;
  92         }
  93
  94         return PCIBIOS_SUCCESSFUL;
  95 }
  96
  97 void tsi108_clear_pci_error(u32 pci_cfg_base)
  98 {
  99         u32 err_stat, err_addr, pci_stat;
 100
 101         /*
 102          * Quietly clear PB and PCI error flags set as result
 103          * of PCI/X configuration read requests.
 104          */
 105
 106         /* Read PB Error Log Registers */
 107
 108         err_stat = tsi108_read_reg(TSI108_PB_OFFSET + TSI108_PB_ERRCS);
 109         err_addr = tsi108_read_reg(TSI108_PB_OFFSET + TSI108_PB_AERR);
 110
 111         if (err_stat & TSI108_PB_ERRCS_ES) {
 112                 /* Clear error flag */
 113                 tsi108_write_reg(TSI108_PB_OFFSET + TSI108_PB_ERRCS,
 114                                  TSI108_PB_ERRCS_ES);
 115
 116                 /* Clear read error reported in PB_ISR */
 117                 tsi108_write_reg(TSI108_PB_OFFSET + TSI108_PB_ISR,
 118                                  TSI108_PB_ISR_PBS_RD_ERR);
 119
 120                 /* Clear PCI/X bus cfg errors if applicable */
 121                 if ((err_addr & 0xFF000000) == pci_cfg_base) {
 122                         pci_stat =
 123                             tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_CSR);
 124                         tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_CSR,
 125                                          pci_stat);
 126                 }
 127         }
 128
 129         return;
 130 }
 131
 132 #define __tsi108_read_pci_config(x, addr, op)           \
 133         __asm__ __volatile__(                           \
 134                 "       "op" %0,0,%1\n"         \
 135                 "1:     eieio\n"                        \
 136                 "2:\n"                                  \
 137                 ".section .fixup,\"ax\"\n"              \
 138                 "3:     li %0,-1\n"                     \
 139                 "       b 2b\n"                         \
 140                 ".section __ex_table,\"a\"\n"           \
 141                 "       .align 2\n"                     \
 142                 "       .long 1b,3b\n"                  \
 143                 ".text"                                 \
 144                 : "=r"(x) : "r"(addr))
 145
 146 int
 147 tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
 148                           int len, u32 * val)
 149 {
 150         volatile unsigned char *cfg_addr;
 151         struct pci_controller *hose = pci_bus_to_host(bus);
 152         u32 temp;
 153
 154         if (ppc_md.pci_exclude_device)
 155                 if (ppc_md.pci_exclude_device(hose, bus->number, devfn))
 156                         return PCIBIOS_DEVICE_NOT_FOUND;
 157
 158         cfg_addr = (unsigned char *)(tsi_mk_config_addr(bus->number,
 159                                                         devfn,
 160                                                         offset) | (offset &
 161                                                                    0x03));
 162
 163         switch (len) {
 164         case 1:
 165                 __tsi108_read_pci_config(temp, cfg_addr, "lbzx");
 166                 break;
 167         case 2:
 168                 __tsi108_read_pci_config(temp, cfg_addr, "lhbrx");
 169                 break;
 170         default:
 171                 __tsi108_read_pci_config(temp, cfg_addr, "lwbrx");
 172                 break;
 173         }
 174
 175         *val = temp;
 176
 177 #ifdef DEBUG
 178         if ((0xFFFFFFFF != temp) && (0xFFFF != temp) && (0xFF != temp)) {
 179                 printk("PCI CFG read : ");
 180                 printk("%d:0x%x:0x%x ", bus->number, devfn, offset);
 181                 printk("%d ADDR=0x%08x ", len, (uint) cfg_addr);
 182                 printk("data = 0x%x\n", *val);
 183         }
 184 #endif
 185         return PCIBIOS_SUCCESSFUL;
 186 }
 187
 188 void tsi108_clear_pci_cfg_error(void)
 189 {
 190         tsi108_clear_pci_error(tsi108_pci_cfg_phys);
 191 }
 192
 193 static struct pci_ops tsi108_direct_pci_ops = {
 194         .read = tsi108_direct_read_config,
 195         .write = tsi108_direct_write_config,
 196 };
 197
 198 int __init tsi108_setup_pci(struct device_node *dev, u32 cfg_phys, int primary)
 199 {
 200         int len;
 201         struct pci_controller *hose;
 202         struct resource rsrc;
 203         const int *bus_range;
 204         int has_address = 0;
 205
 206         /* PCI Config mapping */
 207         tsi108_pci_cfg_base = (u32)ioremap(cfg_phys, TSI108_PCI_CFG_SIZE);
 208         tsi108_pci_cfg_phys = cfg_phys;
 209         DBG("TSI_PCI: %s tsi108_pci_cfg_base=0x%x\n", __func__,
 210             tsi108_pci_cfg_base);
 211
 212         /* Fetch host bridge registers address */
 213         has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
 214
 215         /* Get bus range if any */
 216         bus_range = of_get_property(dev, "bus-range", &len);
 217         if (bus_range == NULL || len < 2 * sizeof(int)) {
 218                 printk(KERN_WARNING "Can't get bus-range for %s, assume"
 219                        " bus 0\n", dev->full_name);
 220         }
 221
 222         hose = pcibios_alloc_controller(dev);
 223
 224         if (!hose) {
 225                 printk("PCI Host bridge init failed\n");
 226                 return -ENOMEM;
 227         }
 228
 229         hose->first_busno = bus_range ? bus_range[0] : 0;
 230         hose->last_busno = bus_range ? bus_range[1] : 0xff;
 231
 232         (hose)->ops = &tsi108_direct_pci_ops;
 233
 234         printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08x. "
 235                "Firmware bus number: %d->%d\n",
 236                rsrc.start, hose->first_busno, hose->last_busno);
 237
 238         /* Interpret the "ranges" property */
 239         /* This also maps the I/O region and sets isa_io/mem_base */
 240         pci_process_bridge_OF_ranges(hose, dev, primary);
 241         return 0;
 242 }
 243
 244 /*
 245  * Low level utility functions
 246  */
 247
 248 static void tsi108_pci_int_mask(u_int irq)
 249 {
 250         u_int irp_cfg;
 251         int int_line = (irq - IRQ_PCI_INTAD_BASE);
 252
 253         irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
 254         mb();
 255         irp_cfg |= (1 << int_line);     /* INTx_DIR = output */
 256         irp_cfg &= ~(3 << (8 + (int_line * 2)));        /* INTx_TYPE = unused */
 257         tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL, irp_cfg);
 258         mb();
 259         irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
 260 }
 261
 262 static void tsi108_pci_int_unmask(u_int irq)
 263 {
 264         u_int irp_cfg;
 265         int int_line = (irq - IRQ_PCI_INTAD_BASE);
 266
 267         irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
 268         mb();
 269         irp_cfg &= ~(1 << int_line);
 270         irp_cfg |= (3 << (8 + (int_line * 2)));
 271         tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL, irp_cfg);
 272         mb();
 273 }
 274
 275 static void init_pci_source(void)
 276 {
 277         tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL,
 278                         0x0000ff00);
 279         tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE,
 280                         TSI108_PCI_IRP_ENABLE_P_INT);
 281         mb();
 282 }
 283
 284 static inline unsigned int get_pci_source(void)
 285 {
 286         u_int temp = 0;
 287         int irq = -1;
 288         int i;
 289         u_int pci_irp_stat;
 290         static int mask = 0;
 291
 292         /* Read PCI/X block interrupt status register */
 293         pci_irp_stat = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_STAT);
 294         mb();
 295
 296         if (pci_irp_stat & TSI108_PCI_IRP_STAT_P_INT) {
 297                 /* Process Interrupt from PCI bus INTA# - INTD# lines */
 298                 temp =
 299                     tsi108_read_reg(TSI108_PCI_OFFSET +
 300                                     TSI108_PCI_IRP_INTAD) & 0xf;
 301                 mb();
 302                 for (i = 0; i < 4; i++, mask++) {
 303                         if (temp & (1 << mask % 4)) {
 304                                 irq = IRQ_PCI_INTA + mask % 4;
 305                                 mask++;
 306                                 break;
 307                         }
 308                 }
 309
 310                 /* Disable interrupts from PCI block */
 311                 temp = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE);
 312                 tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE,
 313                                 temp & ~TSI108_PCI_IRP_ENABLE_P_INT);
 314                 mb();
 315                 (void)tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE);
 316                 mb();
 317         }
 318 #ifdef DEBUG
 319         else {
 320                 printk("TSI108_PIC: error in TSI108_PCI_IRP_STAT\n");
 321                 pci_irp_stat =
 322                     tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_STAT);
 323                 temp =
 324                     tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_INTAD);
 325                 mb();
 326                 printk(">> stat=0x%08x intad=0x%08x ", pci_irp_stat, temp);
 327                 temp =
 328                     tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
 329                 mb();
 330                 printk("cfg_ctl=0x%08x ", temp);
 331                 temp =
 332                     tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE);
 333                 mb();
 334                 printk("irp_enable=0x%08x\n", temp);
 335         }
 336 #endif  /* end of DEBUG */
 337
 338         return irq;
 339 }
 340
 341
 342 /*
 343  * Linux descriptor level callbacks
 344  */
 345
 346 static void tsi108_pci_irq_unmask(struct irq_data *d)
 347 {
 348         tsi108_pci_int_unmask(d->irq);
 349
 350         /* Enable interrupts from PCI block */
 351         tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE,
 352                          tsi108_read_reg(TSI108_PCI_OFFSET +
 353                                          TSI108_PCI_IRP_ENABLE) |
 354                          TSI108_PCI_IRP_ENABLE_P_INT);
 355         mb();
 356 }
 357
 358 static void tsi108_pci_irq_mask(struct irq_data *d)
 359 {
 360         tsi108_pci_int_mask(d->irq);
 361 }
 362
 363 static void tsi108_pci_irq_ack(struct irq_data *d)
 364 {
 365         tsi108_pci_int_mask(d->irq);
 366 }
 367
 368 /*
 369  * Interrupt controller descriptor for cascaded PCI interrupt controller.
 370  */
 371
 372 static struct irq_chip tsi108_pci_irq = {
 373         .name = "tsi108_PCI_int",
 374         .irq_mask = tsi108_pci_irq_mask,
 375         .irq_ack = tsi108_pci_irq_ack,
 376         .irq_unmask = tsi108_pci_irq_unmask,
 377 };
 378
 379 static int pci_irq_host_xlate(struct irq_domain *h, struct device_node *ct,
 380                             const u32 *intspec, unsigned int intsize,
 381                             irq_hw_number_t *out_hwirq, unsigned int *out_flags)
 382 {
 383         *out_hwirq = intspec[0];
 384         *out_flags = IRQ_TYPE_LEVEL_HIGH;
 385         return 0;
 386 }
 387
 388 static int pci_irq_host_map(struct irq_domain *h, unsigned int virq,
 389                           irq_hw_number_t hw)
 390 {       unsigned int irq;
 391         DBG("%s(%d, 0x%lx)\n", __func__, virq, hw);
 392         if ((virq >= 1) && (virq <= 4)){
 393                 irq = virq + IRQ_PCI_INTAD_BASE - 1;
 394                 irq_set_status_flags(irq, IRQ_LEVEL);
 395                 irq_set_chip(irq, &tsi108_pci_irq);
 396         }
 397         return 0;
 398 }
 399
 400 static const struct irq_domain_ops pci_irq_domain_ops = {
 401         .map = pci_irq_host_map,
 402         .xlate = pci_irq_host_xlate,
 403 };
 404
 405 /*
 406  * Exported functions
 407  */
 408
 409 /*
 410  * The Tsi108 PCI interrupts initialization routine.
 411  *
 412  * The INTA# - INTD# interrupts on the PCI bus are reported by the PCI block
 413  * to the MPIC using single interrupt source (IRQ_TSI108_PCI). Therefore the
 414  * PCI block has to be treated as a cascaded interrupt controller connected
 415  * to the MPIC.
 416  */
 417
 418 void __init tsi108_pci_int_init(struct device_node *node)
 419 {
 420         DBG("Tsi108_pci_int_init: initializing PCI interrupts\n");
 421
 422         pci_irq_host = irq_domain_add_legacy_isa(node, &pci_irq_domain_ops, NULL);
 423         if (pci_irq_host == NULL) {
 424                 printk(KERN_ERR "pci_irq_host: failed to allocate irq domain!\n");
 425                 return;
 426         }
 427
 428         init_pci_source();
 429 }
 430
 431 void tsi108_irq_cascade(struct irq_desc *desc)
 432 {
 433         struct irq_chip *chip = irq_desc_get_chip(desc);
 434         unsigned int cascade_irq = get_pci_source();
 435
 436         if (cascade_irq != NO_IRQ)
 437                 generic_handle_irq(cascade_irq);
 438
 439         chip->irq_eoi(&desc->irq_data);
 440 }