Linux 4.6-rc6
[linux/fpc-iii.git] / arch / unicore32 / kernel / puv3-core.c
blob438dd2edba4feabe4c6bfad18f17c4d174c0655c
1 /*
2 * linux/arch/unicore32/kernel/puv3-core.c
4 * Code specific to PKUnity SoC and UniCore ISA
6 * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
7 * Copyright (C) 2001-2010 Guan Xuetao
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
14 #include <linux/init.h>
15 #include <linux/device.h>
16 #include <linux/amba/bus.h>
17 #include <linux/platform_device.h>
18 #include <linux/io.h>
19 #include <linux/cnt32_to_63.h>
20 #include <linux/usb/musb.h>
22 #include <asm/irq.h>
23 #include <mach/hardware.h>
24 #include <mach/pm.h>
27 * This is the PKUnity sched_clock implementation. This has
28 * a resolution of 271ns, and a maximum value of 32025597s (370 days).
30 * The return value is guaranteed to be monotonic in that range as
31 * long as there is always less than 582 seconds between successive
32 * calls to this function.
34 * ( * 1E9 / CLOCK_TICK_RATE ) -> about 2235/32
36 unsigned long long sched_clock(void)
38 unsigned long long v = cnt32_to_63(readl(OST_OSCR));
40 /* original conservative method, but overflow frequently
41 * v *= NSEC_PER_SEC >> 12;
42 * do_div(v, CLOCK_TICK_RATE >> 12);
44 v = ((v & 0x7fffffffffffffffULL) * 2235) >> 5;
46 return v;
49 static struct resource puv3_usb_resources[] = {
50 /* order is significant! */
52 .start = io_v2p(PKUNITY_USB_BASE),
53 .end = io_v2p(PKUNITY_USB_BASE) + 0x3ff,
54 .flags = IORESOURCE_MEM,
55 }, {
56 .start = IRQ_USB,
57 .flags = IORESOURCE_IRQ,
58 }, {
59 .start = IRQ_USB,
60 .flags = IORESOURCE_IRQ,
64 static struct musb_hdrc_config puv3_usb_config[] = {
66 .num_eps = 16,
67 .multipoint = 1,
68 #ifdef CONFIG_USB_INVENTRA_DMA
69 .dma = 1,
70 .dma_channels = 8,
71 #endif
75 static struct musb_hdrc_platform_data puv3_usb_plat = {
76 .mode = MUSB_HOST,
77 .min_power = 100,
78 .clock = 0,
79 .config = puv3_usb_config,
82 static struct resource puv3_mmc_resources[] = {
83 [0] = {
84 .start = io_v2p(PKUNITY_SDC_BASE),
85 .end = io_v2p(PKUNITY_SDC_BASE) + 0xfff,
86 .flags = IORESOURCE_MEM,
88 [1] = {
89 .start = IRQ_SDC,
90 .end = IRQ_SDC,
91 .flags = IORESOURCE_IRQ,
95 static struct resource puv3_unigfx_resources[] = {
96 [0] = {
97 .start = io_v2p(PKUNITY_UNIGFX_BASE),
98 .end = io_v2p(PKUNITY_UNIGFX_BASE) + 0xfff,
99 .flags = IORESOURCE_MEM,
103 static struct resource puv3_rtc_resources[] = {
104 [0] = {
105 .start = io_v2p(PKUNITY_RTC_BASE),
106 .end = io_v2p(PKUNITY_RTC_BASE) + 0xff,
107 .flags = IORESOURCE_MEM,
109 [1] = {
110 .start = IRQ_RTCAlarm,
111 .end = IRQ_RTCAlarm,
112 .flags = IORESOURCE_IRQ,
114 [2] = {
115 .start = IRQ_RTC,
116 .end = IRQ_RTC,
117 .flags = IORESOURCE_IRQ
121 static struct resource puv3_pwm_resources[] = {
122 [0] = {
123 .start = io_v2p(PKUNITY_OST_BASE) + 0x80,
124 .end = io_v2p(PKUNITY_OST_BASE) + 0xff,
125 .flags = IORESOURCE_MEM,
129 static struct resource puv3_uart0_resources[] = {
130 [0] = {
131 .start = io_v2p(PKUNITY_UART0_BASE),
132 .end = io_v2p(PKUNITY_UART0_BASE) + 0xff,
133 .flags = IORESOURCE_MEM,
135 [1] = {
136 .start = IRQ_UART0,
137 .end = IRQ_UART0,
138 .flags = IORESOURCE_IRQ
142 static struct resource puv3_uart1_resources[] = {
143 [0] = {
144 .start = io_v2p(PKUNITY_UART1_BASE),
145 .end = io_v2p(PKUNITY_UART1_BASE) + 0xff,
146 .flags = IORESOURCE_MEM,
148 [1] = {
149 .start = IRQ_UART1,
150 .end = IRQ_UART1,
151 .flags = IORESOURCE_IRQ
155 static struct resource puv3_umal_resources[] = {
156 [0] = {
157 .start = io_v2p(PKUNITY_UMAL_BASE),
158 .end = io_v2p(PKUNITY_UMAL_BASE) + 0x1fff,
159 .flags = IORESOURCE_MEM,
161 [1] = {
162 .start = IRQ_UMAL,
163 .end = IRQ_UMAL,
164 .flags = IORESOURCE_IRQ
168 #ifdef CONFIG_PUV3_PM
170 #define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x
171 #define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x]
174 * List of global PXA peripheral registers to preserve.
175 * More ones like CP and general purpose register values are preserved
176 * with the stack pointer in sleep.S.
178 enum {
179 SLEEP_SAVE_PM_PLLDDRCFG,
180 SLEEP_SAVE_COUNT
184 static void puv3_cpu_pm_save(unsigned long *sleep_save)
186 /* SAVE(PM_PLLDDRCFG); */
189 static void puv3_cpu_pm_restore(unsigned long *sleep_save)
191 /* RESTORE(PM_PLLDDRCFG); */
194 static int puv3_cpu_pm_prepare(void)
196 /* set resume return address */
197 writel(virt_to_phys(puv3_cpu_resume), PM_DIVCFG);
198 return 0;
201 static void puv3_cpu_pm_enter(suspend_state_t state)
203 /* Clear reset status */
204 writel(RESETC_RSSR_HWR | RESETC_RSSR_WDR
205 | RESETC_RSSR_SMR | RESETC_RSSR_SWR, RESETC_RSSR);
207 switch (state) {
208 /* case PM_SUSPEND_ON:
209 puv3_cpu_idle();
210 break; */
211 case PM_SUSPEND_MEM:
212 puv3_cpu_pm_prepare();
213 puv3_cpu_suspend(PM_PMCR_SFB);
214 break;
218 static int puv3_cpu_pm_valid(suspend_state_t state)
220 return state == PM_SUSPEND_MEM;
223 static void puv3_cpu_pm_finish(void)
225 /* ensure not to come back here if it wasn't intended */
226 /* PSPR = 0; */
229 static struct puv3_cpu_pm_fns puv3_cpu_pm_fnss = {
230 .save_count = SLEEP_SAVE_COUNT,
231 .valid = puv3_cpu_pm_valid,
232 .save = puv3_cpu_pm_save,
233 .restore = puv3_cpu_pm_restore,
234 .enter = puv3_cpu_pm_enter,
235 .prepare = puv3_cpu_pm_prepare,
236 .finish = puv3_cpu_pm_finish,
239 static void __init puv3_init_pm(void)
241 puv3_cpu_pm_fns = &puv3_cpu_pm_fnss;
243 #else
244 static inline void puv3_init_pm(void) {}
245 #endif
247 void puv3_ps2_init(void)
249 struct clk *bclk32;
251 bclk32 = clk_get(NULL, "BUS32_CLK");
252 writel(clk_get_rate(bclk32) / 200000, PS2_CNT); /* should > 5us */
255 void __init puv3_core_init(void)
257 puv3_init_pm();
258 puv3_ps2_init();
260 platform_device_register_simple("PKUnity-v3-RTC", -1,
261 puv3_rtc_resources, ARRAY_SIZE(puv3_rtc_resources));
262 platform_device_register_simple("PKUnity-v3-UMAL", -1,
263 puv3_umal_resources, ARRAY_SIZE(puv3_umal_resources));
264 platform_device_register_simple("PKUnity-v3-MMC", -1,
265 puv3_mmc_resources, ARRAY_SIZE(puv3_mmc_resources));
266 platform_device_register_simple("PKUnity-v3-UNIGFX", -1,
267 puv3_unigfx_resources, ARRAY_SIZE(puv3_unigfx_resources));
268 platform_device_register_simple("PKUnity-v3-PWM", -1,
269 puv3_pwm_resources, ARRAY_SIZE(puv3_pwm_resources));
270 platform_device_register_simple("PKUnity-v3-UART", 0,
271 puv3_uart0_resources, ARRAY_SIZE(puv3_uart0_resources));
272 platform_device_register_simple("PKUnity-v3-UART", 1,
273 puv3_uart1_resources, ARRAY_SIZE(puv3_uart1_resources));
274 platform_device_register_simple("PKUnity-v3-AC97", -1, NULL, 0);
275 platform_device_register_resndata(NULL, "musb_hdrc", -1,
276 puv3_usb_resources, ARRAY_SIZE(puv3_usb_resources),
277 &puv3_usb_plat, sizeof(puv3_usb_plat));