2 * Machine specific setup for xen
4 * Jeremy Fitzhardinge <jeremy@xensource.com>, XenSource Inc, 2007
7 #include <linux/module.h>
8 #include <linux/sched.h>
11 #include <linux/memblock.h>
12 #include <linux/cpuidle.h>
13 #include <linux/cpufreq.h>
18 #include <asm/setup.h>
21 #include <asm/xen/hypervisor.h>
22 #include <asm/xen/hypercall.h>
26 #include <xen/interface/callback.h>
27 #include <xen/interface/memory.h>
28 #include <xen/interface/physdev.h>
29 #include <xen/features.h>
30 #include <xen/hvc-console.h>
35 #define GB(x) ((uint64_t)(x) * 1024 * 1024 * 1024)
37 /* Amount of extra memory space we add to the e820 ranges */
38 struct xen_memory_region xen_extra_mem
[XEN_EXTRA_MEM_MAX_REGIONS
] __initdata
;
40 /* Number of pages released from the initial allocation. */
41 unsigned long xen_released_pages
;
43 /* E820 map used during setting up memory. */
44 static struct e820entry xen_e820_map
[E820MAX
] __initdata
;
45 static u32 xen_e820_map_entries __initdata
;
48 * Buffer used to remap identity mapped pages. We only need the virtual space.
49 * The physical page behind this address is remapped as needed to different
52 #define REMAP_SIZE (P2M_PER_PAGE - 3)
54 unsigned long next_area_mfn
;
55 unsigned long target_pfn
;
57 unsigned long mfns
[REMAP_SIZE
];
58 } xen_remap_buf __initdata
__aligned(PAGE_SIZE
);
59 static unsigned long xen_remap_mfn __initdata
= INVALID_P2M_ENTRY
;
62 * The maximum amount of extra memory compared to the base size. The
63 * main scaling factor is the size of struct page. At extreme ratios
64 * of base:extra, all the base memory can be filled with page
65 * structures for the extra memory, leaving no space for anything
68 * 10x seems like a reasonable balance between scaling flexibility and
69 * leaving a practically usable system.
71 #define EXTRA_MEM_RATIO (10)
73 static bool xen_512gb_limit __initdata
= IS_ENABLED(CONFIG_XEN_512GB
);
75 static void __init
xen_parse_512gb(void)
80 arg
= strstr(xen_start_info
->cmd_line
, "xen_512gb_limit");
84 arg
= strstr(xen_start_info
->cmd_line
, "xen_512gb_limit=");
87 else if (strtobool(arg
+ strlen("xen_512gb_limit="), &val
))
90 xen_512gb_limit
= val
;
93 static void __init
xen_add_extra_mem(unsigned long start_pfn
,
99 * No need to check for zero size, should happen rarely and will only
100 * write a new entry regarded to be unused due to zero size.
102 for (i
= 0; i
< XEN_EXTRA_MEM_MAX_REGIONS
; i
++) {
103 /* Add new region. */
104 if (xen_extra_mem
[i
].n_pfns
== 0) {
105 xen_extra_mem
[i
].start_pfn
= start_pfn
;
106 xen_extra_mem
[i
].n_pfns
= n_pfns
;
109 /* Append to existing region. */
110 if (xen_extra_mem
[i
].start_pfn
+ xen_extra_mem
[i
].n_pfns
==
112 xen_extra_mem
[i
].n_pfns
+= n_pfns
;
116 if (i
== XEN_EXTRA_MEM_MAX_REGIONS
)
117 printk(KERN_WARNING
"Warning: not enough extra memory regions\n");
119 memblock_reserve(PFN_PHYS(start_pfn
), PFN_PHYS(n_pfns
));
122 static void __init
xen_del_extra_mem(unsigned long start_pfn
,
123 unsigned long n_pfns
)
126 unsigned long start_r
, size_r
;
128 for (i
= 0; i
< XEN_EXTRA_MEM_MAX_REGIONS
; i
++) {
129 start_r
= xen_extra_mem
[i
].start_pfn
;
130 size_r
= xen_extra_mem
[i
].n_pfns
;
132 /* Start of region. */
133 if (start_r
== start_pfn
) {
134 BUG_ON(n_pfns
> size_r
);
135 xen_extra_mem
[i
].start_pfn
+= n_pfns
;
136 xen_extra_mem
[i
].n_pfns
-= n_pfns
;
140 if (start_r
+ size_r
== start_pfn
+ n_pfns
) {
141 BUG_ON(n_pfns
> size_r
);
142 xen_extra_mem
[i
].n_pfns
-= n_pfns
;
146 if (start_pfn
> start_r
&& start_pfn
< start_r
+ size_r
) {
147 BUG_ON(start_pfn
+ n_pfns
> start_r
+ size_r
);
148 xen_extra_mem
[i
].n_pfns
= start_pfn
- start_r
;
149 /* Calling memblock_reserve() again is okay. */
150 xen_add_extra_mem(start_pfn
+ n_pfns
, start_r
+ size_r
-
151 (start_pfn
+ n_pfns
));
155 memblock_free(PFN_PHYS(start_pfn
), PFN_PHYS(n_pfns
));
159 * Called during boot before the p2m list can take entries beyond the
160 * hypervisor supplied p2m list. Entries in extra mem are to be regarded as
163 unsigned long __ref
xen_chk_extra_mem(unsigned long pfn
)
167 for (i
= 0; i
< XEN_EXTRA_MEM_MAX_REGIONS
; i
++) {
168 if (pfn
>= xen_extra_mem
[i
].start_pfn
&&
169 pfn
< xen_extra_mem
[i
].start_pfn
+ xen_extra_mem
[i
].n_pfns
)
170 return INVALID_P2M_ENTRY
;
173 return IDENTITY_FRAME(pfn
);
177 * Mark all pfns of extra mem as invalid in p2m list.
179 void __init
xen_inv_extra_mem(void)
181 unsigned long pfn
, pfn_s
, pfn_e
;
184 for (i
= 0; i
< XEN_EXTRA_MEM_MAX_REGIONS
; i
++) {
185 if (!xen_extra_mem
[i
].n_pfns
)
187 pfn_s
= xen_extra_mem
[i
].start_pfn
;
188 pfn_e
= pfn_s
+ xen_extra_mem
[i
].n_pfns
;
189 for (pfn
= pfn_s
; pfn
< pfn_e
; pfn
++)
190 set_phys_to_machine(pfn
, INVALID_P2M_ENTRY
);
195 * Finds the next RAM pfn available in the E820 map after min_pfn.
196 * This function updates min_pfn with the pfn found and returns
197 * the size of that range or zero if not found.
199 static unsigned long __init
xen_find_pfn_range(unsigned long *min_pfn
)
201 const struct e820entry
*entry
= xen_e820_map
;
203 unsigned long done
= 0;
205 for (i
= 0; i
< xen_e820_map_entries
; i
++, entry
++) {
209 if (entry
->type
!= E820_RAM
)
212 e_pfn
= PFN_DOWN(entry
->addr
+ entry
->size
);
214 /* We only care about E820 after this */
215 if (e_pfn
<= *min_pfn
)
218 s_pfn
= PFN_UP(entry
->addr
);
220 /* If min_pfn falls within the E820 entry, we want to start
221 * at the min_pfn PFN.
223 if (s_pfn
<= *min_pfn
) {
224 done
= e_pfn
- *min_pfn
;
226 done
= e_pfn
- s_pfn
;
235 static int __init
xen_free_mfn(unsigned long mfn
)
237 struct xen_memory_reservation reservation
= {
243 set_xen_guest_handle(reservation
.extent_start
, &mfn
);
244 reservation
.nr_extents
= 1;
246 return HYPERVISOR_memory_op(XENMEM_decrease_reservation
, &reservation
);
250 * This releases a chunk of memory and then does the identity map. It's used
251 * as a fallback if the remapping fails.
253 static void __init
xen_set_identity_and_release_chunk(unsigned long start_pfn
,
254 unsigned long end_pfn
, unsigned long nr_pages
)
256 unsigned long pfn
, end
;
259 WARN_ON(start_pfn
> end_pfn
);
261 /* Release pages first. */
262 end
= min(end_pfn
, nr_pages
);
263 for (pfn
= start_pfn
; pfn
< end
; pfn
++) {
264 unsigned long mfn
= pfn_to_mfn(pfn
);
266 /* Make sure pfn exists to start with */
267 if (mfn
== INVALID_P2M_ENTRY
|| mfn_to_pfn(mfn
) != pfn
)
270 ret
= xen_free_mfn(mfn
);
271 WARN(ret
!= 1, "Failed to release pfn %lx err=%d\n", pfn
, ret
);
274 xen_released_pages
++;
275 if (!__set_phys_to_machine(pfn
, INVALID_P2M_ENTRY
))
281 set_phys_range_identity(start_pfn
, end_pfn
);
285 * Helper function to update the p2m and m2p tables and kernel mapping.
287 static void __init
xen_update_mem_tables(unsigned long pfn
, unsigned long mfn
)
289 struct mmu_update update
= {
290 .ptr
= ((uint64_t)mfn
<< PAGE_SHIFT
) | MMU_MACHPHYS_UPDATE
,
295 if (!set_phys_to_machine(pfn
, mfn
)) {
296 WARN(1, "Failed to set p2m mapping for pfn=%ld mfn=%ld\n",
302 if (HYPERVISOR_mmu_update(&update
, 1, NULL
, DOMID_SELF
) < 0) {
303 WARN(1, "Failed to set m2p mapping for mfn=%ld pfn=%ld\n",
308 /* Update kernel mapping, but not for highmem. */
309 if (pfn
>= PFN_UP(__pa(high_memory
- 1)))
312 if (HYPERVISOR_update_va_mapping((unsigned long)__va(pfn
<< PAGE_SHIFT
),
313 mfn_pte(mfn
, PAGE_KERNEL
), 0)) {
314 WARN(1, "Failed to update kernel mapping for mfn=%ld pfn=%ld\n",
321 * This function updates the p2m and m2p tables with an identity map from
322 * start_pfn to start_pfn+size and prepares remapping the underlying RAM of the
323 * original allocation at remap_pfn. The information needed for remapping is
324 * saved in the memory itself to avoid the need for allocating buffers. The
325 * complete remap information is contained in a list of MFNs each containing
326 * up to REMAP_SIZE MFNs and the start target PFN for doing the remap.
327 * This enables us to preserve the original mfn sequence while doing the
328 * remapping at a time when the memory management is capable of allocating
329 * virtual and physical memory in arbitrary amounts, see 'xen_remap_memory' and
332 static void __init
xen_do_set_identity_and_remap_chunk(
333 unsigned long start_pfn
, unsigned long size
, unsigned long remap_pfn
)
335 unsigned long buf
= (unsigned long)&xen_remap_buf
;
336 unsigned long mfn_save
, mfn
;
337 unsigned long ident_pfn_iter
, remap_pfn_iter
;
338 unsigned long ident_end_pfn
= start_pfn
+ size
;
339 unsigned long left
= size
;
340 unsigned int i
, chunk
;
344 BUG_ON(xen_feature(XENFEAT_auto_translated_physmap
));
346 mfn_save
= virt_to_mfn(buf
);
348 for (ident_pfn_iter
= start_pfn
, remap_pfn_iter
= remap_pfn
;
349 ident_pfn_iter
< ident_end_pfn
;
350 ident_pfn_iter
+= REMAP_SIZE
, remap_pfn_iter
+= REMAP_SIZE
) {
351 chunk
= (left
< REMAP_SIZE
) ? left
: REMAP_SIZE
;
353 /* Map first pfn to xen_remap_buf */
354 mfn
= pfn_to_mfn(ident_pfn_iter
);
355 set_pte_mfn(buf
, mfn
, PAGE_KERNEL
);
357 /* Save mapping information in page */
358 xen_remap_buf
.next_area_mfn
= xen_remap_mfn
;
359 xen_remap_buf
.target_pfn
= remap_pfn_iter
;
360 xen_remap_buf
.size
= chunk
;
361 for (i
= 0; i
< chunk
; i
++)
362 xen_remap_buf
.mfns
[i
] = pfn_to_mfn(ident_pfn_iter
+ i
);
364 /* Put remap buf into list. */
367 /* Set identity map */
368 set_phys_range_identity(ident_pfn_iter
, ident_pfn_iter
+ chunk
);
373 /* Restore old xen_remap_buf mapping */
374 set_pte_mfn(buf
, mfn_save
, PAGE_KERNEL
);
378 * This function takes a contiguous pfn range that needs to be identity mapped
381 * 1) Finds a new range of pfns to use to remap based on E820 and remap_pfn.
382 * 2) Calls the do_ function to actually do the mapping/remapping work.
384 * The goal is to not allocate additional memory but to remap the existing
385 * pages. In the case of an error the underlying memory is simply released back
386 * to Xen and not remapped.
388 static unsigned long __init
xen_set_identity_and_remap_chunk(
389 unsigned long start_pfn
, unsigned long end_pfn
, unsigned long nr_pages
,
390 unsigned long remap_pfn
)
394 unsigned long n
= end_pfn
- start_pfn
;
397 unsigned long cur_pfn
= start_pfn
+ i
;
398 unsigned long left
= n
- i
;
399 unsigned long size
= left
;
400 unsigned long remap_range_size
;
402 /* Do not remap pages beyond the current allocation */
403 if (cur_pfn
>= nr_pages
) {
404 /* Identity map remaining pages */
405 set_phys_range_identity(cur_pfn
, cur_pfn
+ size
);
408 if (cur_pfn
+ size
> nr_pages
)
409 size
= nr_pages
- cur_pfn
;
411 remap_range_size
= xen_find_pfn_range(&remap_pfn
);
412 if (!remap_range_size
) {
413 pr_warning("Unable to find available pfn range, not remapping identity pages\n");
414 xen_set_identity_and_release_chunk(cur_pfn
,
415 cur_pfn
+ left
, nr_pages
);
418 /* Adjust size to fit in current e820 RAM region */
419 if (size
> remap_range_size
)
420 size
= remap_range_size
;
422 xen_do_set_identity_and_remap_chunk(cur_pfn
, size
, remap_pfn
);
424 /* Update variables to reflect new mappings. */
430 * If the PFNs are currently mapped, the VA mapping also needs
431 * to be updated to be 1:1.
433 for (pfn
= start_pfn
; pfn
<= max_pfn_mapped
&& pfn
< end_pfn
; pfn
++)
434 (void)HYPERVISOR_update_va_mapping(
435 (unsigned long)__va(pfn
<< PAGE_SHIFT
),
436 mfn_pte(pfn
, PAGE_KERNEL_IO
), 0);
441 static void __init
xen_set_identity_and_remap(unsigned long nr_pages
)
443 phys_addr_t start
= 0;
444 unsigned long last_pfn
= nr_pages
;
445 const struct e820entry
*entry
= xen_e820_map
;
449 * Combine non-RAM regions and gaps until a RAM region (or the
450 * end of the map) is reached, then set the 1:1 map and
451 * remap the memory in those non-RAM regions.
453 * The combined non-RAM regions are rounded to a whole number
454 * of pages so any partial pages are accessible via the 1:1
455 * mapping. This is needed for some BIOSes that put (for
456 * example) the DMI tables in a reserved region that begins on
457 * a non-page boundary.
459 for (i
= 0; i
< xen_e820_map_entries
; i
++, entry
++) {
460 phys_addr_t end
= entry
->addr
+ entry
->size
;
461 if (entry
->type
== E820_RAM
|| i
== xen_e820_map_entries
- 1) {
462 unsigned long start_pfn
= PFN_DOWN(start
);
463 unsigned long end_pfn
= PFN_UP(end
);
465 if (entry
->type
== E820_RAM
)
466 end_pfn
= PFN_UP(entry
->addr
);
468 if (start_pfn
< end_pfn
)
469 last_pfn
= xen_set_identity_and_remap_chunk(
470 start_pfn
, end_pfn
, nr_pages
,
476 pr_info("Released %ld page(s)\n", xen_released_pages
);
480 * Remap the memory prepared in xen_do_set_identity_and_remap_chunk().
481 * The remap information (which mfn remap to which pfn) is contained in the
482 * to be remapped memory itself in a linked list anchored at xen_remap_mfn.
483 * This scheme allows to remap the different chunks in arbitrary order while
484 * the resulting mapping will be independant from the order.
486 void __init
xen_remap_memory(void)
488 unsigned long buf
= (unsigned long)&xen_remap_buf
;
489 unsigned long mfn_save
, mfn
, pfn
;
490 unsigned long remapped
= 0;
492 unsigned long pfn_s
= ~0UL;
493 unsigned long len
= 0;
495 mfn_save
= virt_to_mfn(buf
);
497 while (xen_remap_mfn
!= INVALID_P2M_ENTRY
) {
498 /* Map the remap information */
499 set_pte_mfn(buf
, xen_remap_mfn
, PAGE_KERNEL
);
501 BUG_ON(xen_remap_mfn
!= xen_remap_buf
.mfns
[0]);
503 pfn
= xen_remap_buf
.target_pfn
;
504 for (i
= 0; i
< xen_remap_buf
.size
; i
++) {
505 mfn
= xen_remap_buf
.mfns
[i
];
506 xen_update_mem_tables(pfn
, mfn
);
510 if (pfn_s
== ~0UL || pfn
== pfn_s
) {
511 pfn_s
= xen_remap_buf
.target_pfn
;
512 len
+= xen_remap_buf
.size
;
513 } else if (pfn_s
+ len
== xen_remap_buf
.target_pfn
) {
514 len
+= xen_remap_buf
.size
;
516 xen_del_extra_mem(pfn_s
, len
);
517 pfn_s
= xen_remap_buf
.target_pfn
;
518 len
= xen_remap_buf
.size
;
522 xen_remap_mfn
= xen_remap_buf
.next_area_mfn
;
525 if (pfn_s
!= ~0UL && len
)
526 xen_del_extra_mem(pfn_s
, len
);
528 set_pte_mfn(buf
, mfn_save
, PAGE_KERNEL
);
530 pr_info("Remapped %ld page(s)\n", remapped
);
533 static unsigned long __init
xen_get_pages_limit(void)
538 limit
= GB(64) / PAGE_SIZE
;
540 limit
= MAXMEM
/ PAGE_SIZE
;
541 if (!xen_initial_domain() && xen_512gb_limit
)
542 limit
= GB(512) / PAGE_SIZE
;
547 static unsigned long __init
xen_get_max_pages(void)
549 unsigned long max_pages
, limit
;
550 domid_t domid
= DOMID_SELF
;
553 limit
= xen_get_pages_limit();
557 * For the initial domain we use the maximum reservation as
560 * For guest domains the current maximum reservation reflects
561 * the current maximum rather than the static maximum. In this
562 * case the e820 map provided to us will cover the static
565 if (xen_initial_domain()) {
566 ret
= HYPERVISOR_memory_op(XENMEM_maximum_reservation
, &domid
);
571 return min(max_pages
, limit
);
574 static void __init
xen_align_and_add_e820_region(phys_addr_t start
,
575 phys_addr_t size
, int type
)
577 phys_addr_t end
= start
+ size
;
579 /* Align RAM regions to page boundaries. */
580 if (type
== E820_RAM
) {
581 start
= PAGE_ALIGN(start
);
582 end
&= ~((phys_addr_t
)PAGE_SIZE
- 1);
585 e820_add_region(start
, end
- start
, type
);
588 static void __init
xen_ignore_unusable(void)
590 struct e820entry
*entry
= xen_e820_map
;
593 for (i
= 0; i
< xen_e820_map_entries
; i
++, entry
++) {
594 if (entry
->type
== E820_UNUSABLE
)
595 entry
->type
= E820_RAM
;
599 static unsigned long __init
xen_count_remap_pages(unsigned long max_pfn
)
601 unsigned long extra
= 0;
602 unsigned long start_pfn
, end_pfn
;
603 const struct e820entry
*entry
= xen_e820_map
;
607 for (i
= 0; i
< xen_e820_map_entries
; i
++, entry
++) {
608 start_pfn
= PFN_DOWN(entry
->addr
);
609 /* Adjacent regions on non-page boundaries handling! */
610 end_pfn
= min(end_pfn
, start_pfn
);
612 if (start_pfn
>= max_pfn
)
613 return extra
+ max_pfn
- end_pfn
;
615 /* Add any holes in map to result. */
616 extra
+= start_pfn
- end_pfn
;
618 end_pfn
= PFN_UP(entry
->addr
+ entry
->size
);
619 end_pfn
= min(end_pfn
, max_pfn
);
621 if (entry
->type
!= E820_RAM
)
622 extra
+= end_pfn
- start_pfn
;
628 bool __init
xen_is_e820_reserved(phys_addr_t start
, phys_addr_t size
)
630 struct e820entry
*entry
;
638 entry
= xen_e820_map
;
640 for (mapcnt
= 0; mapcnt
< xen_e820_map_entries
; mapcnt
++) {
641 if (entry
->type
== E820_RAM
&& entry
->addr
<= start
&&
642 (entry
->addr
+ entry
->size
) >= end
)
652 * Find a free area in physical memory not yet reserved and compliant with
654 * Used to relocate pre-allocated areas like initrd or p2m list which are in
655 * conflict with the to be used E820 map.
656 * In case no area is found, return 0. Otherwise return the physical address
657 * of the area which is already reserved for convenience.
659 phys_addr_t __init
xen_find_free_area(phys_addr_t size
)
662 phys_addr_t addr
, start
;
663 struct e820entry
*entry
= xen_e820_map
;
665 for (mapcnt
= 0; mapcnt
< xen_e820_map_entries
; mapcnt
++, entry
++) {
666 if (entry
->type
!= E820_RAM
|| entry
->size
< size
)
669 for (addr
= start
; addr
< start
+ size
; addr
+= PAGE_SIZE
) {
670 if (!memblock_is_reserved(addr
))
672 start
= addr
+ PAGE_SIZE
;
673 if (start
+ size
> entry
->addr
+ entry
->size
)
676 if (addr
>= start
+ size
) {
677 memblock_reserve(start
, size
);
686 * Like memcpy, but with physical addresses for dest and src.
688 static void __init
xen_phys_memcpy(phys_addr_t dest
, phys_addr_t src
,
691 phys_addr_t dest_off
, src_off
, dest_len
, src_len
, len
;
695 dest_off
= dest
& ~PAGE_MASK
;
696 src_off
= src
& ~PAGE_MASK
;
698 if (dest_len
> (NR_FIX_BTMAPS
<< PAGE_SHIFT
) - dest_off
)
699 dest_len
= (NR_FIX_BTMAPS
<< PAGE_SHIFT
) - dest_off
;
701 if (src_len
> (NR_FIX_BTMAPS
<< PAGE_SHIFT
) - src_off
)
702 src_len
= (NR_FIX_BTMAPS
<< PAGE_SHIFT
) - src_off
;
703 len
= min(dest_len
, src_len
);
704 to
= early_memremap(dest
- dest_off
, dest_len
+ dest_off
);
705 from
= early_memremap(src
- src_off
, src_len
+ src_off
);
706 memcpy(to
, from
, len
);
707 early_memunmap(to
, dest_len
+ dest_off
);
708 early_memunmap(from
, src_len
+ src_off
);
716 * Reserve Xen mfn_list.
718 static void __init
xen_reserve_xen_mfnlist(void)
720 phys_addr_t start
, size
;
722 if (xen_start_info
->mfn_list
>= __START_KERNEL_map
) {
723 start
= __pa(xen_start_info
->mfn_list
);
724 size
= PFN_ALIGN(xen_start_info
->nr_pages
*
725 sizeof(unsigned long));
727 start
= PFN_PHYS(xen_start_info
->first_p2m_pfn
);
728 size
= PFN_PHYS(xen_start_info
->nr_p2m_frames
);
731 if (!xen_is_e820_reserved(start
, size
)) {
732 memblock_reserve(start
, size
);
738 * Relocating the p2m on 32 bit system to an arbitrary virtual address
739 * is not supported, so just give up.
741 xen_raw_console_write("Xen hypervisor allocated p2m list conflicts with E820 map\n");
749 * machine_specific_memory_setup - Hook for machine specific memory setup.
751 char * __init
xen_memory_setup(void)
753 unsigned long max_pfn
, pfn_s
, n_pfns
;
754 phys_addr_t mem_end
, addr
, size
, chunk_size
;
757 struct xen_memory_map memmap
;
758 unsigned long max_pages
;
759 unsigned long extra_pages
= 0;
764 max_pfn
= xen_get_pages_limit();
765 max_pfn
= min(max_pfn
, xen_start_info
->nr_pages
);
766 mem_end
= PFN_PHYS(max_pfn
);
768 memmap
.nr_entries
= E820MAX
;
769 set_xen_guest_handle(memmap
.buffer
, xen_e820_map
);
771 op
= xen_initial_domain() ?
772 XENMEM_machine_memory_map
:
774 rc
= HYPERVISOR_memory_op(op
, &memmap
);
776 BUG_ON(xen_initial_domain());
777 memmap
.nr_entries
= 1;
778 xen_e820_map
[0].addr
= 0ULL;
779 xen_e820_map
[0].size
= mem_end
;
780 /* 8MB slack (to balance backend allocations). */
781 xen_e820_map
[0].size
+= 8ULL << 20;
782 xen_e820_map
[0].type
= E820_RAM
;
786 BUG_ON(memmap
.nr_entries
== 0);
787 xen_e820_map_entries
= memmap
.nr_entries
;
790 * Xen won't allow a 1:1 mapping to be created to UNUSABLE
791 * regions, so if we're using the machine memory map leave the
792 * region as RAM as it is in the pseudo-physical map.
794 * UNUSABLE regions in domUs are not handled and will need
795 * a patch in the future.
797 if (xen_initial_domain())
798 xen_ignore_unusable();
800 /* Make sure the Xen-supplied memory map is well-ordered. */
801 sanitize_e820_map(xen_e820_map
, ARRAY_SIZE(xen_e820_map
),
802 &xen_e820_map_entries
);
804 max_pages
= xen_get_max_pages();
806 /* How many extra pages do we need due to remapping? */
807 max_pages
+= xen_count_remap_pages(max_pfn
);
809 if (max_pages
> max_pfn
)
810 extra_pages
+= max_pages
- max_pfn
;
813 * Clamp the amount of extra memory to a EXTRA_MEM_RATIO
814 * factor the base size. On non-highmem systems, the base
815 * size is the full initial memory allocation; on highmem it
816 * is limited to the max size of lowmem, so that it doesn't
817 * get completely filled.
819 * Make sure we have no memory above max_pages, as this area
820 * isn't handled by the p2m management.
822 * In principle there could be a problem in lowmem systems if
823 * the initial memory is also very large with respect to
824 * lowmem, but we won't try to deal with that here.
826 extra_pages
= min3(EXTRA_MEM_RATIO
* min(max_pfn
, PFN_DOWN(MAXMEM
)),
827 extra_pages
, max_pages
- max_pfn
);
829 addr
= xen_e820_map
[0].addr
;
830 size
= xen_e820_map
[0].size
;
831 while (i
< xen_e820_map_entries
) {
832 bool discard
= false;
835 type
= xen_e820_map
[i
].type
;
837 if (type
== E820_RAM
) {
838 if (addr
< mem_end
) {
839 chunk_size
= min(size
, mem_end
- addr
);
840 } else if (extra_pages
) {
841 chunk_size
= min(size
, PFN_PHYS(extra_pages
));
842 pfn_s
= PFN_UP(addr
);
843 n_pfns
= PFN_DOWN(addr
+ chunk_size
) - pfn_s
;
844 extra_pages
-= n_pfns
;
845 xen_add_extra_mem(pfn_s
, n_pfns
);
846 xen_max_p2m_pfn
= pfn_s
+ n_pfns
;
852 xen_align_and_add_e820_region(addr
, chunk_size
, type
);
858 if (i
< xen_e820_map_entries
) {
859 addr
= xen_e820_map
[i
].addr
;
860 size
= xen_e820_map
[i
].size
;
866 * Set the rest as identity mapped, in case PCI BARs are
869 set_phys_range_identity(addr
/ PAGE_SIZE
, ~0ul);
872 * In domU, the ISA region is normal, usable memory, but we
873 * reserve ISA memory anyway because too many things poke
876 e820_add_region(ISA_START_ADDRESS
, ISA_END_ADDRESS
- ISA_START_ADDRESS
,
879 sanitize_e820_map(e820
.map
, ARRAY_SIZE(e820
.map
), &e820
.nr_map
);
882 * Check whether the kernel itself conflicts with the target E820 map.
883 * Failing now is better than running into weird problems later due
884 * to relocating (and even reusing) pages with kernel text or data.
886 if (xen_is_e820_reserved(__pa_symbol(_text
),
887 __pa_symbol(__bss_stop
) - __pa_symbol(_text
))) {
888 xen_raw_console_write("Xen hypervisor allocated kernel memory conflicts with E820 map\n");
893 * Check for a conflict of the hypervisor supplied page tables with
894 * the target E820 map.
898 xen_reserve_xen_mfnlist();
900 /* Check for a conflict of the initrd with the target E820 map. */
901 if (xen_is_e820_reserved(boot_params
.hdr
.ramdisk_image
,
902 boot_params
.hdr
.ramdisk_size
)) {
903 phys_addr_t new_area
, start
, size
;
905 new_area
= xen_find_free_area(boot_params
.hdr
.ramdisk_size
);
907 xen_raw_console_write("Can't find new memory area for initrd needed due to E820 map conflict\n");
911 start
= boot_params
.hdr
.ramdisk_image
;
912 size
= boot_params
.hdr
.ramdisk_size
;
913 xen_phys_memcpy(new_area
, start
, size
);
914 pr_info("initrd moved from [mem %#010llx-%#010llx] to [mem %#010llx-%#010llx]\n",
915 start
, start
+ size
, new_area
, new_area
+ size
);
916 memblock_free(start
, size
);
917 boot_params
.hdr
.ramdisk_image
= new_area
;
918 boot_params
.ext_ramdisk_image
= new_area
>> 32;
922 * Set identity map on non-RAM pages and prepare remapping the
925 xen_set_identity_and_remap(max_pfn
);
931 * Machine specific memory setup for auto-translated guests.
933 char * __init
xen_auto_xlated_memory_setup(void)
935 struct xen_memory_map memmap
;
939 memmap
.nr_entries
= E820MAX
;
940 set_xen_guest_handle(memmap
.buffer
, xen_e820_map
);
942 rc
= HYPERVISOR_memory_op(XENMEM_memory_map
, &memmap
);
944 panic("No memory map (%d)\n", rc
);
946 xen_e820_map_entries
= memmap
.nr_entries
;
948 sanitize_e820_map(xen_e820_map
, ARRAY_SIZE(xen_e820_map
),
949 &xen_e820_map_entries
);
951 for (i
= 0; i
< xen_e820_map_entries
; i
++)
952 e820_add_region(xen_e820_map
[i
].addr
, xen_e820_map
[i
].size
,
953 xen_e820_map
[i
].type
);
955 /* Remove p2m info, it is not needed. */
956 xen_start_info
->mfn_list
= 0;
957 xen_start_info
->first_p2m_pfn
= 0;
958 xen_start_info
->nr_p2m_frames
= 0;
964 * Set the bit indicating "nosegneg" library variants should be used.
965 * We only need to bother in pure 32-bit mode; compat 32-bit processes
966 * can have un-truncated segments, so wrapping around is allowed.
968 static void __init
fiddle_vdso(void)
971 u32
*mask
= vdso_image_32
.data
+
972 vdso_image_32
.sym_VDSO32_NOTE_MASK
;
973 *mask
|= 1 << VDSO_NOTE_NONEGSEG_BIT
;
977 static int register_callback(unsigned type
, const void *func
)
979 struct callback_register callback
= {
981 .address
= XEN_CALLBACK(__KERNEL_CS
, func
),
982 .flags
= CALLBACKF_mask_events
,
985 return HYPERVISOR_callback_op(CALLBACKOP_register
, &callback
);
988 void xen_enable_sysenter(void)
991 unsigned sysenter_feature
;
994 sysenter_feature
= X86_FEATURE_SEP
;
996 sysenter_feature
= X86_FEATURE_SYSENTER32
;
999 if (!boot_cpu_has(sysenter_feature
))
1002 ret
= register_callback(CALLBACKTYPE_sysenter
, xen_sysenter_target
);
1004 setup_clear_cpu_cap(sysenter_feature
);
1007 void xen_enable_syscall(void)
1009 #ifdef CONFIG_X86_64
1012 ret
= register_callback(CALLBACKTYPE_syscall
, xen_syscall_target
);
1014 printk(KERN_ERR
"Failed to set syscall callback: %d\n", ret
);
1015 /* Pretty fatal; 64-bit userspace has no other
1016 mechanism for syscalls. */
1019 if (boot_cpu_has(X86_FEATURE_SYSCALL32
)) {
1020 ret
= register_callback(CALLBACKTYPE_syscall32
,
1021 xen_syscall32_target
);
1023 setup_clear_cpu_cap(X86_FEATURE_SYSCALL32
);
1025 #endif /* CONFIG_X86_64 */
1028 void __init
xen_pvmmu_arch_setup(void)
1030 HYPERVISOR_vm_assist(VMASST_CMD_enable
, VMASST_TYPE_4gb_segments
);
1031 HYPERVISOR_vm_assist(VMASST_CMD_enable
, VMASST_TYPE_writable_pagetables
);
1033 HYPERVISOR_vm_assist(VMASST_CMD_enable
,
1034 VMASST_TYPE_pae_extended_cr3
);
1036 if (register_callback(CALLBACKTYPE_event
, xen_hypervisor_callback
) ||
1037 register_callback(CALLBACKTYPE_failsafe
, xen_failsafe_callback
))
1040 xen_enable_sysenter();
1041 xen_enable_syscall();
1044 /* This function is not called for HVM domains */
1045 void __init
xen_arch_setup(void)
1047 xen_panic_handler_init();
1048 if (!xen_feature(XENFEAT_auto_translated_physmap
))
1049 xen_pvmmu_arch_setup();
1052 if (!(xen_start_info
->flags
& SIF_INITDOMAIN
)) {
1053 printk(KERN_INFO
"ACPI in unprivileged domain disabled\n");
1058 memcpy(boot_command_line
, xen_start_info
->cmd_line
,
1059 MAX_GUEST_CMDLINE
> COMMAND_LINE_SIZE
?
1060 COMMAND_LINE_SIZE
: MAX_GUEST_CMDLINE
);
1062 /* Set up idle, making sure it calls safe_halt() pvop */
1065 WARN_ON(xen_set_default_idle());