2 * adv7842 - Analog Devices ADV7842 video decoder driver
4 * Copyright 2013 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
6 * This program is free software; you may redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; version 2 of the License.
10 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
11 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
12 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
13 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
14 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
15 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
16 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
22 * References (c = chapter, p = page):
23 * REF_01 - Analog devices, ADV7842,
24 * Register Settings Recommendations, Rev. 1.9, April 2011
25 * REF_02 - Analog devices, Software User Guide, UG-206,
26 * ADV7842 I2C Register Maps, Rev. 0, November 2010
27 * REF_03 - Analog devices, Hardware User Guide, UG-214,
28 * ADV7842 Fast Switching 2:1 HDMI 1.4 Receiver with 3D-Comb
29 * Decoder and Digitizer , Rev. 0, January 2011
33 #include <linux/kernel.h>
34 #include <linux/module.h>
35 #include <linux/slab.h>
36 #include <linux/i2c.h>
37 #include <linux/delay.h>
38 #include <linux/videodev2.h>
39 #include <linux/workqueue.h>
40 #include <linux/v4l2-dv-timings.h>
41 #include <linux/hdmi.h>
42 #include <media/cec.h>
43 #include <media/v4l2-device.h>
44 #include <media/v4l2-event.h>
45 #include <media/v4l2-ctrls.h>
46 #include <media/v4l2-dv-timings.h>
47 #include <media/i2c/adv7842.h>
50 module_param(debug
, int, 0644);
51 MODULE_PARM_DESC(debug
, "debug level (0-2)");
53 MODULE_DESCRIPTION("Analog Devices ADV7842 video decoder driver");
54 MODULE_AUTHOR("Hans Verkuil <hans.verkuil@cisco.com>");
55 MODULE_AUTHOR("Martin Bugge <marbugge@cisco.com>");
56 MODULE_LICENSE("GPL");
58 /* ADV7842 system clock frequency */
59 #define ADV7842_fsc (28636360)
61 #define ADV7842_RGB_OUT (1 << 1)
63 #define ADV7842_OP_FORMAT_SEL_8BIT (0 << 0)
64 #define ADV7842_OP_FORMAT_SEL_10BIT (1 << 0)
65 #define ADV7842_OP_FORMAT_SEL_12BIT (2 << 0)
67 #define ADV7842_OP_MODE_SEL_SDR_422 (0 << 5)
68 #define ADV7842_OP_MODE_SEL_DDR_422 (1 << 5)
69 #define ADV7842_OP_MODE_SEL_SDR_444 (2 << 5)
70 #define ADV7842_OP_MODE_SEL_DDR_444 (3 << 5)
71 #define ADV7842_OP_MODE_SEL_SDR_422_2X (4 << 5)
72 #define ADV7842_OP_MODE_SEL_ADI_CM (5 << 5)
74 #define ADV7842_OP_CH_SEL_GBR (0 << 5)
75 #define ADV7842_OP_CH_SEL_GRB (1 << 5)
76 #define ADV7842_OP_CH_SEL_BGR (2 << 5)
77 #define ADV7842_OP_CH_SEL_RGB (3 << 5)
78 #define ADV7842_OP_CH_SEL_BRG (4 << 5)
79 #define ADV7842_OP_CH_SEL_RBG (5 << 5)
81 #define ADV7842_OP_SWAP_CB_CR (1 << 0)
83 #define ADV7842_MAX_ADDRS (3)
86 **********************************************************************
88 * Arrays with configuration parameters for the ADV7842
90 **********************************************************************
93 struct adv7842_format_info
{
101 struct adv7842_state
{
102 struct adv7842_platform_data pdata
;
103 struct v4l2_subdev sd
;
104 struct media_pad pad
;
105 struct v4l2_ctrl_handler hdl
;
106 enum adv7842_mode mode
;
107 struct v4l2_dv_timings timings
;
108 enum adv7842_vid_std_select vid_std_select
;
110 const struct adv7842_format_info
*format
;
121 struct v4l2_fract aspect_ratio
;
122 u32 rgb_quantization_range
;
124 struct delayed_work delayed_work_enable_hotplug
;
125 bool restart_stdi_once
;
129 struct i2c_client
*i2c_sdp_io
;
130 struct i2c_client
*i2c_sdp
;
131 struct i2c_client
*i2c_cp
;
132 struct i2c_client
*i2c_vdp
;
133 struct i2c_client
*i2c_afe
;
134 struct i2c_client
*i2c_hdmi
;
135 struct i2c_client
*i2c_repeater
;
136 struct i2c_client
*i2c_edid
;
137 struct i2c_client
*i2c_infoframe
;
138 struct i2c_client
*i2c_cec
;
139 struct i2c_client
*i2c_avlink
;
142 struct v4l2_ctrl
*detect_tx_5v_ctrl
;
143 struct v4l2_ctrl
*analog_sampling_phase_ctrl
;
144 struct v4l2_ctrl
*free_run_color_ctrl_manual
;
145 struct v4l2_ctrl
*free_run_color_ctrl
;
146 struct v4l2_ctrl
*rgb_quantization_range_ctrl
;
148 struct cec_adapter
*cec_adap
;
149 u8 cec_addr
[ADV7842_MAX_ADDRS
];
151 bool cec_enabled_adap
;
154 /* Unsupported timings. This device cannot support 720p30. */
155 static const struct v4l2_dv_timings adv7842_timings_exceptions
[] = {
156 V4L2_DV_BT_CEA_1280X720P30
,
160 static bool adv7842_check_dv_timings(const struct v4l2_dv_timings
*t
, void *hdl
)
164 for (i
= 0; adv7842_timings_exceptions
[i
].bt
.width
; i
++)
165 if (v4l2_match_dv_timings(t
, adv7842_timings_exceptions
+ i
, 0, false))
170 struct adv7842_video_standards
{
171 struct v4l2_dv_timings timings
;
176 /* sorted by number of lines */
177 static const struct adv7842_video_standards adv7842_prim_mode_comp
[] = {
178 /* { V4L2_DV_BT_CEA_720X480P59_94, 0x0a, 0x00 }, TODO flickering */
179 { V4L2_DV_BT_CEA_720X576P50
, 0x0b, 0x00 },
180 { V4L2_DV_BT_CEA_1280X720P50
, 0x19, 0x01 },
181 { V4L2_DV_BT_CEA_1280X720P60
, 0x19, 0x00 },
182 { V4L2_DV_BT_CEA_1920X1080P24
, 0x1e, 0x04 },
183 { V4L2_DV_BT_CEA_1920X1080P25
, 0x1e, 0x03 },
184 { V4L2_DV_BT_CEA_1920X1080P30
, 0x1e, 0x02 },
185 { V4L2_DV_BT_CEA_1920X1080P50
, 0x1e, 0x01 },
186 { V4L2_DV_BT_CEA_1920X1080P60
, 0x1e, 0x00 },
187 /* TODO add 1920x1080P60_RB (CVT timing) */
191 /* sorted by number of lines */
192 static const struct adv7842_video_standards adv7842_prim_mode_gr
[] = {
193 { V4L2_DV_BT_DMT_640X480P60
, 0x08, 0x00 },
194 { V4L2_DV_BT_DMT_640X480P72
, 0x09, 0x00 },
195 { V4L2_DV_BT_DMT_640X480P75
, 0x0a, 0x00 },
196 { V4L2_DV_BT_DMT_640X480P85
, 0x0b, 0x00 },
197 { V4L2_DV_BT_DMT_800X600P56
, 0x00, 0x00 },
198 { V4L2_DV_BT_DMT_800X600P60
, 0x01, 0x00 },
199 { V4L2_DV_BT_DMT_800X600P72
, 0x02, 0x00 },
200 { V4L2_DV_BT_DMT_800X600P75
, 0x03, 0x00 },
201 { V4L2_DV_BT_DMT_800X600P85
, 0x04, 0x00 },
202 { V4L2_DV_BT_DMT_1024X768P60
, 0x0c, 0x00 },
203 { V4L2_DV_BT_DMT_1024X768P70
, 0x0d, 0x00 },
204 { V4L2_DV_BT_DMT_1024X768P75
, 0x0e, 0x00 },
205 { V4L2_DV_BT_DMT_1024X768P85
, 0x0f, 0x00 },
206 { V4L2_DV_BT_DMT_1280X1024P60
, 0x05, 0x00 },
207 { V4L2_DV_BT_DMT_1280X1024P75
, 0x06, 0x00 },
208 { V4L2_DV_BT_DMT_1360X768P60
, 0x12, 0x00 },
209 { V4L2_DV_BT_DMT_1366X768P60
, 0x13, 0x00 },
210 { V4L2_DV_BT_DMT_1400X1050P60
, 0x14, 0x00 },
211 { V4L2_DV_BT_DMT_1400X1050P75
, 0x15, 0x00 },
212 { V4L2_DV_BT_DMT_1600X1200P60
, 0x16, 0x00 }, /* TODO not tested */
213 /* TODO add 1600X1200P60_RB (not a DMT timing) */
214 { V4L2_DV_BT_DMT_1680X1050P60
, 0x18, 0x00 },
215 { V4L2_DV_BT_DMT_1920X1200P60_RB
, 0x19, 0x00 }, /* TODO not tested */
219 /* sorted by number of lines */
220 static const struct adv7842_video_standards adv7842_prim_mode_hdmi_comp
[] = {
221 { V4L2_DV_BT_CEA_720X480P59_94
, 0x0a, 0x00 },
222 { V4L2_DV_BT_CEA_720X576P50
, 0x0b, 0x00 },
223 { V4L2_DV_BT_CEA_1280X720P50
, 0x13, 0x01 },
224 { V4L2_DV_BT_CEA_1280X720P60
, 0x13, 0x00 },
225 { V4L2_DV_BT_CEA_1920X1080P24
, 0x1e, 0x04 },
226 { V4L2_DV_BT_CEA_1920X1080P25
, 0x1e, 0x03 },
227 { V4L2_DV_BT_CEA_1920X1080P30
, 0x1e, 0x02 },
228 { V4L2_DV_BT_CEA_1920X1080P50
, 0x1e, 0x01 },
229 { V4L2_DV_BT_CEA_1920X1080P60
, 0x1e, 0x00 },
233 /* sorted by number of lines */
234 static const struct adv7842_video_standards adv7842_prim_mode_hdmi_gr
[] = {
235 { V4L2_DV_BT_DMT_640X480P60
, 0x08, 0x00 },
236 { V4L2_DV_BT_DMT_640X480P72
, 0x09, 0x00 },
237 { V4L2_DV_BT_DMT_640X480P75
, 0x0a, 0x00 },
238 { V4L2_DV_BT_DMT_640X480P85
, 0x0b, 0x00 },
239 { V4L2_DV_BT_DMT_800X600P56
, 0x00, 0x00 },
240 { V4L2_DV_BT_DMT_800X600P60
, 0x01, 0x00 },
241 { V4L2_DV_BT_DMT_800X600P72
, 0x02, 0x00 },
242 { V4L2_DV_BT_DMT_800X600P75
, 0x03, 0x00 },
243 { V4L2_DV_BT_DMT_800X600P85
, 0x04, 0x00 },
244 { V4L2_DV_BT_DMT_1024X768P60
, 0x0c, 0x00 },
245 { V4L2_DV_BT_DMT_1024X768P70
, 0x0d, 0x00 },
246 { V4L2_DV_BT_DMT_1024X768P75
, 0x0e, 0x00 },
247 { V4L2_DV_BT_DMT_1024X768P85
, 0x0f, 0x00 },
248 { V4L2_DV_BT_DMT_1280X1024P60
, 0x05, 0x00 },
249 { V4L2_DV_BT_DMT_1280X1024P75
, 0x06, 0x00 },
253 static const struct v4l2_event adv7842_ev_fmt
= {
254 .type
= V4L2_EVENT_SOURCE_CHANGE
,
255 .u
.src_change
.changes
= V4L2_EVENT_SRC_CH_RESOLUTION
,
258 /* ----------------------------------------------------------------------- */
260 static inline struct adv7842_state
*to_state(struct v4l2_subdev
*sd
)
262 return container_of(sd
, struct adv7842_state
, sd
);
265 static inline struct v4l2_subdev
*to_sd(struct v4l2_ctrl
*ctrl
)
267 return &container_of(ctrl
->handler
, struct adv7842_state
, hdl
)->sd
;
270 static inline unsigned hblanking(const struct v4l2_bt_timings
*t
)
272 return V4L2_DV_BT_BLANKING_WIDTH(t
);
275 static inline unsigned htotal(const struct v4l2_bt_timings
*t
)
277 return V4L2_DV_BT_FRAME_WIDTH(t
);
280 static inline unsigned vblanking(const struct v4l2_bt_timings
*t
)
282 return V4L2_DV_BT_BLANKING_HEIGHT(t
);
285 static inline unsigned vtotal(const struct v4l2_bt_timings
*t
)
287 return V4L2_DV_BT_FRAME_HEIGHT(t
);
291 /* ----------------------------------------------------------------------- */
293 static s32
adv_smbus_read_byte_data_check(struct i2c_client
*client
,
294 u8 command
, bool check
)
296 union i2c_smbus_data data
;
298 if (!i2c_smbus_xfer(client
->adapter
, client
->addr
, client
->flags
,
299 I2C_SMBUS_READ
, command
,
300 I2C_SMBUS_BYTE_DATA
, &data
))
303 v4l_err(client
, "error reading %02x, %02x\n",
304 client
->addr
, command
);
308 static s32
adv_smbus_read_byte_data(struct i2c_client
*client
, u8 command
)
312 for (i
= 0; i
< 3; i
++) {
313 int ret
= adv_smbus_read_byte_data_check(client
, command
, true);
317 v4l_err(client
, "read ok after %d retries\n", i
);
321 v4l_err(client
, "read failed\n");
325 static s32
adv_smbus_write_byte_data(struct i2c_client
*client
,
326 u8 command
, u8 value
)
328 union i2c_smbus_data data
;
333 for (i
= 0; i
< 3; i
++) {
334 err
= i2c_smbus_xfer(client
->adapter
, client
->addr
,
336 I2C_SMBUS_WRITE
, command
,
337 I2C_SMBUS_BYTE_DATA
, &data
);
342 v4l_err(client
, "error writing %02x, %02x, %02x\n",
343 client
->addr
, command
, value
);
347 static void adv_smbus_write_byte_no_check(struct i2c_client
*client
,
348 u8 command
, u8 value
)
350 union i2c_smbus_data data
;
353 i2c_smbus_xfer(client
->adapter
, client
->addr
,
355 I2C_SMBUS_WRITE
, command
,
356 I2C_SMBUS_BYTE_DATA
, &data
);
359 static s32
adv_smbus_write_i2c_block_data(struct i2c_client
*client
,
360 u8 command
, unsigned length
, const u8
*values
)
362 union i2c_smbus_data data
;
364 if (length
> I2C_SMBUS_BLOCK_MAX
)
365 length
= I2C_SMBUS_BLOCK_MAX
;
366 data
.block
[0] = length
;
367 memcpy(data
.block
+ 1, values
, length
);
368 return i2c_smbus_xfer(client
->adapter
, client
->addr
, client
->flags
,
369 I2C_SMBUS_WRITE
, command
,
370 I2C_SMBUS_I2C_BLOCK_DATA
, &data
);
373 /* ----------------------------------------------------------------------- */
375 static inline int io_read(struct v4l2_subdev
*sd
, u8 reg
)
377 struct i2c_client
*client
= v4l2_get_subdevdata(sd
);
379 return adv_smbus_read_byte_data(client
, reg
);
382 static inline int io_write(struct v4l2_subdev
*sd
, u8 reg
, u8 val
)
384 struct i2c_client
*client
= v4l2_get_subdevdata(sd
);
386 return adv_smbus_write_byte_data(client
, reg
, val
);
389 static inline int io_write_and_or(struct v4l2_subdev
*sd
, u8 reg
, u8 mask
, u8 val
)
391 return io_write(sd
, reg
, (io_read(sd
, reg
) & mask
) | val
);
394 static inline int io_write_clr_set(struct v4l2_subdev
*sd
,
395 u8 reg
, u8 mask
, u8 val
)
397 return io_write(sd
, reg
, (io_read(sd
, reg
) & ~mask
) | val
);
400 static inline int avlink_read(struct v4l2_subdev
*sd
, u8 reg
)
402 struct adv7842_state
*state
= to_state(sd
);
404 return adv_smbus_read_byte_data(state
->i2c_avlink
, reg
);
407 static inline int avlink_write(struct v4l2_subdev
*sd
, u8 reg
, u8 val
)
409 struct adv7842_state
*state
= to_state(sd
);
411 return adv_smbus_write_byte_data(state
->i2c_avlink
, reg
, val
);
414 static inline int cec_read(struct v4l2_subdev
*sd
, u8 reg
)
416 struct adv7842_state
*state
= to_state(sd
);
418 return adv_smbus_read_byte_data(state
->i2c_cec
, reg
);
421 static inline int cec_write(struct v4l2_subdev
*sd
, u8 reg
, u8 val
)
423 struct adv7842_state
*state
= to_state(sd
);
425 return adv_smbus_write_byte_data(state
->i2c_cec
, reg
, val
);
428 static inline int cec_write_clr_set(struct v4l2_subdev
*sd
, u8 reg
, u8 mask
, u8 val
)
430 return cec_write(sd
, reg
, (cec_read(sd
, reg
) & ~mask
) | val
);
433 static inline int infoframe_read(struct v4l2_subdev
*sd
, u8 reg
)
435 struct adv7842_state
*state
= to_state(sd
);
437 return adv_smbus_read_byte_data(state
->i2c_infoframe
, reg
);
440 static inline int infoframe_write(struct v4l2_subdev
*sd
, u8 reg
, u8 val
)
442 struct adv7842_state
*state
= to_state(sd
);
444 return adv_smbus_write_byte_data(state
->i2c_infoframe
, reg
, val
);
447 static inline int sdp_io_read(struct v4l2_subdev
*sd
, u8 reg
)
449 struct adv7842_state
*state
= to_state(sd
);
451 return adv_smbus_read_byte_data(state
->i2c_sdp_io
, reg
);
454 static inline int sdp_io_write(struct v4l2_subdev
*sd
, u8 reg
, u8 val
)
456 struct adv7842_state
*state
= to_state(sd
);
458 return adv_smbus_write_byte_data(state
->i2c_sdp_io
, reg
, val
);
461 static inline int sdp_io_write_and_or(struct v4l2_subdev
*sd
, u8 reg
, u8 mask
, u8 val
)
463 return sdp_io_write(sd
, reg
, (sdp_io_read(sd
, reg
) & mask
) | val
);
466 static inline int sdp_read(struct v4l2_subdev
*sd
, u8 reg
)
468 struct adv7842_state
*state
= to_state(sd
);
470 return adv_smbus_read_byte_data(state
->i2c_sdp
, reg
);
473 static inline int sdp_write(struct v4l2_subdev
*sd
, u8 reg
, u8 val
)
475 struct adv7842_state
*state
= to_state(sd
);
477 return adv_smbus_write_byte_data(state
->i2c_sdp
, reg
, val
);
480 static inline int sdp_write_and_or(struct v4l2_subdev
*sd
, u8 reg
, u8 mask
, u8 val
)
482 return sdp_write(sd
, reg
, (sdp_read(sd
, reg
) & mask
) | val
);
485 static inline int afe_read(struct v4l2_subdev
*sd
, u8 reg
)
487 struct adv7842_state
*state
= to_state(sd
);
489 return adv_smbus_read_byte_data(state
->i2c_afe
, reg
);
492 static inline int afe_write(struct v4l2_subdev
*sd
, u8 reg
, u8 val
)
494 struct adv7842_state
*state
= to_state(sd
);
496 return adv_smbus_write_byte_data(state
->i2c_afe
, reg
, val
);
499 static inline int afe_write_and_or(struct v4l2_subdev
*sd
, u8 reg
, u8 mask
, u8 val
)
501 return afe_write(sd
, reg
, (afe_read(sd
, reg
) & mask
) | val
);
504 static inline int rep_read(struct v4l2_subdev
*sd
, u8 reg
)
506 struct adv7842_state
*state
= to_state(sd
);
508 return adv_smbus_read_byte_data(state
->i2c_repeater
, reg
);
511 static inline int rep_write(struct v4l2_subdev
*sd
, u8 reg
, u8 val
)
513 struct adv7842_state
*state
= to_state(sd
);
515 return adv_smbus_write_byte_data(state
->i2c_repeater
, reg
, val
);
518 static inline int rep_write_and_or(struct v4l2_subdev
*sd
, u8 reg
, u8 mask
, u8 val
)
520 return rep_write(sd
, reg
, (rep_read(sd
, reg
) & mask
) | val
);
523 static inline int edid_read(struct v4l2_subdev
*sd
, u8 reg
)
525 struct adv7842_state
*state
= to_state(sd
);
527 return adv_smbus_read_byte_data(state
->i2c_edid
, reg
);
530 static inline int edid_write(struct v4l2_subdev
*sd
, u8 reg
, u8 val
)
532 struct adv7842_state
*state
= to_state(sd
);
534 return adv_smbus_write_byte_data(state
->i2c_edid
, reg
, val
);
537 static inline int hdmi_read(struct v4l2_subdev
*sd
, u8 reg
)
539 struct adv7842_state
*state
= to_state(sd
);
541 return adv_smbus_read_byte_data(state
->i2c_hdmi
, reg
);
544 static inline int hdmi_write(struct v4l2_subdev
*sd
, u8 reg
, u8 val
)
546 struct adv7842_state
*state
= to_state(sd
);
548 return adv_smbus_write_byte_data(state
->i2c_hdmi
, reg
, val
);
551 static inline int hdmi_write_and_or(struct v4l2_subdev
*sd
, u8 reg
, u8 mask
, u8 val
)
553 return hdmi_write(sd
, reg
, (hdmi_read(sd
, reg
) & mask
) | val
);
556 static inline int cp_read(struct v4l2_subdev
*sd
, u8 reg
)
558 struct adv7842_state
*state
= to_state(sd
);
560 return adv_smbus_read_byte_data(state
->i2c_cp
, reg
);
563 static inline int cp_write(struct v4l2_subdev
*sd
, u8 reg
, u8 val
)
565 struct adv7842_state
*state
= to_state(sd
);
567 return adv_smbus_write_byte_data(state
->i2c_cp
, reg
, val
);
570 static inline int cp_write_and_or(struct v4l2_subdev
*sd
, u8 reg
, u8 mask
, u8 val
)
572 return cp_write(sd
, reg
, (cp_read(sd
, reg
) & mask
) | val
);
575 static inline int vdp_read(struct v4l2_subdev
*sd
, u8 reg
)
577 struct adv7842_state
*state
= to_state(sd
);
579 return adv_smbus_read_byte_data(state
->i2c_vdp
, reg
);
582 static inline int vdp_write(struct v4l2_subdev
*sd
, u8 reg
, u8 val
)
584 struct adv7842_state
*state
= to_state(sd
);
586 return adv_smbus_write_byte_data(state
->i2c_vdp
, reg
, val
);
589 static void main_reset(struct v4l2_subdev
*sd
)
591 struct i2c_client
*client
= v4l2_get_subdevdata(sd
);
593 v4l2_dbg(1, debug
, sd
, "%s:\n", __func__
);
595 adv_smbus_write_byte_no_check(client
, 0xff, 0x80);
600 /* -----------------------------------------------------------------------------
604 static const struct adv7842_format_info adv7842_formats
[] = {
605 { MEDIA_BUS_FMT_RGB888_1X24
, ADV7842_OP_CH_SEL_RGB
, true, false,
606 ADV7842_OP_MODE_SEL_SDR_444
| ADV7842_OP_FORMAT_SEL_8BIT
},
607 { MEDIA_BUS_FMT_YUYV8_2X8
, ADV7842_OP_CH_SEL_RGB
, false, false,
608 ADV7842_OP_MODE_SEL_SDR_422
| ADV7842_OP_FORMAT_SEL_8BIT
},
609 { MEDIA_BUS_FMT_YVYU8_2X8
, ADV7842_OP_CH_SEL_RGB
, false, true,
610 ADV7842_OP_MODE_SEL_SDR_422
| ADV7842_OP_FORMAT_SEL_8BIT
},
611 { MEDIA_BUS_FMT_YUYV10_2X10
, ADV7842_OP_CH_SEL_RGB
, false, false,
612 ADV7842_OP_MODE_SEL_SDR_422
| ADV7842_OP_FORMAT_SEL_10BIT
},
613 { MEDIA_BUS_FMT_YVYU10_2X10
, ADV7842_OP_CH_SEL_RGB
, false, true,
614 ADV7842_OP_MODE_SEL_SDR_422
| ADV7842_OP_FORMAT_SEL_10BIT
},
615 { MEDIA_BUS_FMT_YUYV12_2X12
, ADV7842_OP_CH_SEL_RGB
, false, false,
616 ADV7842_OP_MODE_SEL_SDR_422
| ADV7842_OP_FORMAT_SEL_12BIT
},
617 { MEDIA_BUS_FMT_YVYU12_2X12
, ADV7842_OP_CH_SEL_RGB
, false, true,
618 ADV7842_OP_MODE_SEL_SDR_422
| ADV7842_OP_FORMAT_SEL_12BIT
},
619 { MEDIA_BUS_FMT_UYVY8_1X16
, ADV7842_OP_CH_SEL_RBG
, false, false,
620 ADV7842_OP_MODE_SEL_SDR_422_2X
| ADV7842_OP_FORMAT_SEL_8BIT
},
621 { MEDIA_BUS_FMT_VYUY8_1X16
, ADV7842_OP_CH_SEL_RBG
, false, true,
622 ADV7842_OP_MODE_SEL_SDR_422_2X
| ADV7842_OP_FORMAT_SEL_8BIT
},
623 { MEDIA_BUS_FMT_YUYV8_1X16
, ADV7842_OP_CH_SEL_RGB
, false, false,
624 ADV7842_OP_MODE_SEL_SDR_422_2X
| ADV7842_OP_FORMAT_SEL_8BIT
},
625 { MEDIA_BUS_FMT_YVYU8_1X16
, ADV7842_OP_CH_SEL_RGB
, false, true,
626 ADV7842_OP_MODE_SEL_SDR_422_2X
| ADV7842_OP_FORMAT_SEL_8BIT
},
627 { MEDIA_BUS_FMT_UYVY10_1X20
, ADV7842_OP_CH_SEL_RBG
, false, false,
628 ADV7842_OP_MODE_SEL_SDR_422_2X
| ADV7842_OP_FORMAT_SEL_10BIT
},
629 { MEDIA_BUS_FMT_VYUY10_1X20
, ADV7842_OP_CH_SEL_RBG
, false, true,
630 ADV7842_OP_MODE_SEL_SDR_422_2X
| ADV7842_OP_FORMAT_SEL_10BIT
},
631 { MEDIA_BUS_FMT_YUYV10_1X20
, ADV7842_OP_CH_SEL_RGB
, false, false,
632 ADV7842_OP_MODE_SEL_SDR_422_2X
| ADV7842_OP_FORMAT_SEL_10BIT
},
633 { MEDIA_BUS_FMT_YVYU10_1X20
, ADV7842_OP_CH_SEL_RGB
, false, true,
634 ADV7842_OP_MODE_SEL_SDR_422_2X
| ADV7842_OP_FORMAT_SEL_10BIT
},
635 { MEDIA_BUS_FMT_UYVY12_1X24
, ADV7842_OP_CH_SEL_RBG
, false, false,
636 ADV7842_OP_MODE_SEL_SDR_422_2X
| ADV7842_OP_FORMAT_SEL_12BIT
},
637 { MEDIA_BUS_FMT_VYUY12_1X24
, ADV7842_OP_CH_SEL_RBG
, false, true,
638 ADV7842_OP_MODE_SEL_SDR_422_2X
| ADV7842_OP_FORMAT_SEL_12BIT
},
639 { MEDIA_BUS_FMT_YUYV12_1X24
, ADV7842_OP_CH_SEL_RGB
, false, false,
640 ADV7842_OP_MODE_SEL_SDR_422_2X
| ADV7842_OP_FORMAT_SEL_12BIT
},
641 { MEDIA_BUS_FMT_YVYU12_1X24
, ADV7842_OP_CH_SEL_RGB
, false, true,
642 ADV7842_OP_MODE_SEL_SDR_422_2X
| ADV7842_OP_FORMAT_SEL_12BIT
},
645 static const struct adv7842_format_info
*
646 adv7842_format_info(struct adv7842_state
*state
, u32 code
)
650 for (i
= 0; i
< ARRAY_SIZE(adv7842_formats
); ++i
) {
651 if (adv7842_formats
[i
].code
== code
)
652 return &adv7842_formats
[i
];
658 /* ----------------------------------------------------------------------- */
660 static inline bool is_analog_input(struct v4l2_subdev
*sd
)
662 struct adv7842_state
*state
= to_state(sd
);
664 return ((state
->mode
== ADV7842_MODE_RGB
) ||
665 (state
->mode
== ADV7842_MODE_COMP
));
668 static inline bool is_digital_input(struct v4l2_subdev
*sd
)
670 struct adv7842_state
*state
= to_state(sd
);
672 return state
->mode
== ADV7842_MODE_HDMI
;
675 static const struct v4l2_dv_timings_cap adv7842_timings_cap_analog
= {
676 .type
= V4L2_DV_BT_656_1120
,
677 /* keep this initialization for compatibility with GCC < 4.4.6 */
679 V4L2_INIT_BT_TIMINGS(0, 1920, 0, 1200, 25000000, 170000000,
680 V4L2_DV_BT_STD_CEA861
| V4L2_DV_BT_STD_DMT
|
681 V4L2_DV_BT_STD_GTF
| V4L2_DV_BT_STD_CVT
,
682 V4L2_DV_BT_CAP_PROGRESSIVE
| V4L2_DV_BT_CAP_REDUCED_BLANKING
|
683 V4L2_DV_BT_CAP_CUSTOM
)
686 static const struct v4l2_dv_timings_cap adv7842_timings_cap_digital
= {
687 .type
= V4L2_DV_BT_656_1120
,
688 /* keep this initialization for compatibility with GCC < 4.4.6 */
690 V4L2_INIT_BT_TIMINGS(0, 1920, 0, 1200, 25000000, 225000000,
691 V4L2_DV_BT_STD_CEA861
| V4L2_DV_BT_STD_DMT
|
692 V4L2_DV_BT_STD_GTF
| V4L2_DV_BT_STD_CVT
,
693 V4L2_DV_BT_CAP_PROGRESSIVE
| V4L2_DV_BT_CAP_REDUCED_BLANKING
|
694 V4L2_DV_BT_CAP_CUSTOM
)
697 static inline const struct v4l2_dv_timings_cap
*
698 adv7842_get_dv_timings_cap(struct v4l2_subdev
*sd
)
700 return is_digital_input(sd
) ? &adv7842_timings_cap_digital
:
701 &adv7842_timings_cap_analog
;
704 /* ----------------------------------------------------------------------- */
706 static u16
adv7842_read_cable_det(struct v4l2_subdev
*sd
)
708 u8 reg
= io_read(sd
, 0x6f);
712 val
|= 1; /* port A */
714 val
|= 2; /* port B */
718 static void adv7842_delayed_work_enable_hotplug(struct work_struct
*work
)
720 struct delayed_work
*dwork
= to_delayed_work(work
);
721 struct adv7842_state
*state
= container_of(dwork
,
722 struct adv7842_state
, delayed_work_enable_hotplug
);
723 struct v4l2_subdev
*sd
= &state
->sd
;
724 int present
= state
->hdmi_edid
.present
;
727 v4l2_dbg(2, debug
, sd
, "%s: enable hotplug on ports: 0x%x\n",
730 if (present
& (0x04 << ADV7842_EDID_PORT_A
))
732 if (present
& (0x04 << ADV7842_EDID_PORT_B
))
734 io_write_and_or(sd
, 0x20, 0xcf, mask
);
737 static int edid_write_vga_segment(struct v4l2_subdev
*sd
)
739 struct i2c_client
*client
= v4l2_get_subdevdata(sd
);
740 struct adv7842_state
*state
= to_state(sd
);
741 const u8
*val
= state
->vga_edid
.edid
;
745 v4l2_dbg(2, debug
, sd
, "%s: write EDID on VGA port\n", __func__
);
747 /* HPA disable on port A and B */
748 io_write_and_or(sd
, 0x20, 0xcf, 0x00);
750 /* Disable I2C access to internal EDID ram from VGA DDC port */
751 rep_write_and_or(sd
, 0x7f, 0x7f, 0x00);
753 /* edid segment pointer '1' for VGA port */
754 rep_write_and_or(sd
, 0x77, 0xef, 0x10);
756 for (i
= 0; !err
&& i
< 256; i
+= I2C_SMBUS_BLOCK_MAX
)
757 err
= adv_smbus_write_i2c_block_data(state
->i2c_edid
, i
,
758 I2C_SMBUS_BLOCK_MAX
, val
+ i
);
762 /* Calculates the checksums and enables I2C access
763 * to internal EDID ram from VGA DDC port.
765 rep_write_and_or(sd
, 0x7f, 0x7f, 0x80);
767 for (i
= 0; i
< 1000; i
++) {
768 if (rep_read(sd
, 0x79) & 0x20)
773 v4l_err(client
, "error enabling edid on VGA port\n");
777 /* enable hotplug after 200 ms */
778 schedule_delayed_work(&state
->delayed_work_enable_hotplug
, HZ
/ 5);
783 static int edid_write_hdmi_segment(struct v4l2_subdev
*sd
, u8 port
)
785 struct i2c_client
*client
= v4l2_get_subdevdata(sd
);
786 struct adv7842_state
*state
= to_state(sd
);
787 const u8
*edid
= state
->hdmi_edid
.edid
;
793 v4l2_dbg(2, debug
, sd
, "%s: write EDID on port %c\n",
794 __func__
, (port
== ADV7842_EDID_PORT_A
) ? 'A' : 'B');
796 /* HPA disable on port A and B */
797 io_write_and_or(sd
, 0x20, 0xcf, 0x00);
799 /* Disable I2C access to internal EDID ram from HDMI DDC ports */
800 rep_write_and_or(sd
, 0x77, 0xf3, 0x00);
802 if (!state
->hdmi_edid
.present
)
805 pa
= cec_get_edid_phys_addr(edid
, 256, &spa_loc
);
806 err
= cec_phys_addr_validate(pa
, &pa
, NULL
);
811 * Return an error if no location of the source physical address
817 /* edid segment pointer '0' for HDMI ports */
818 rep_write_and_or(sd
, 0x77, 0xef, 0x00);
820 for (i
= 0; !err
&& i
< 256; i
+= I2C_SMBUS_BLOCK_MAX
)
821 err
= adv_smbus_write_i2c_block_data(state
->i2c_edid
, i
,
822 I2C_SMBUS_BLOCK_MAX
, edid
+ i
);
826 if (port
== ADV7842_EDID_PORT_A
) {
827 rep_write(sd
, 0x72, edid
[spa_loc
]);
828 rep_write(sd
, 0x73, edid
[spa_loc
+ 1]);
830 rep_write(sd
, 0x74, edid
[spa_loc
]);
831 rep_write(sd
, 0x75, edid
[spa_loc
+ 1]);
833 rep_write(sd
, 0x76, spa_loc
& 0xff);
834 rep_write_and_or(sd
, 0x77, 0xbf, (spa_loc
>> 2) & 0x40);
836 /* Calculates the checksums and enables I2C access to internal
837 * EDID ram from HDMI DDC ports
839 rep_write_and_or(sd
, 0x77, 0xf3, state
->hdmi_edid
.present
);
841 for (i
= 0; i
< 1000; i
++) {
842 if (rep_read(sd
, 0x7d) & state
->hdmi_edid
.present
)
847 v4l_err(client
, "error enabling edid on port %c\n",
848 (port
== ADV7842_EDID_PORT_A
) ? 'A' : 'B');
851 cec_s_phys_addr(state
->cec_adap
, pa
, false);
853 /* enable hotplug after 200 ms */
854 schedule_delayed_work(&state
->delayed_work_enable_hotplug
, HZ
/ 5);
859 /* ----------------------------------------------------------------------- */
861 #ifdef CONFIG_VIDEO_ADV_DEBUG
862 static void adv7842_inv_register(struct v4l2_subdev
*sd
)
864 v4l2_info(sd
, "0x000-0x0ff: IO Map\n");
865 v4l2_info(sd
, "0x100-0x1ff: AVLink Map\n");
866 v4l2_info(sd
, "0x200-0x2ff: CEC Map\n");
867 v4l2_info(sd
, "0x300-0x3ff: InfoFrame Map\n");
868 v4l2_info(sd
, "0x400-0x4ff: SDP_IO Map\n");
869 v4l2_info(sd
, "0x500-0x5ff: SDP Map\n");
870 v4l2_info(sd
, "0x600-0x6ff: AFE Map\n");
871 v4l2_info(sd
, "0x700-0x7ff: Repeater Map\n");
872 v4l2_info(sd
, "0x800-0x8ff: EDID Map\n");
873 v4l2_info(sd
, "0x900-0x9ff: HDMI Map\n");
874 v4l2_info(sd
, "0xa00-0xaff: CP Map\n");
875 v4l2_info(sd
, "0xb00-0xbff: VDP Map\n");
878 static int adv7842_g_register(struct v4l2_subdev
*sd
,
879 struct v4l2_dbg_register
*reg
)
882 switch (reg
->reg
>> 8) {
884 reg
->val
= io_read(sd
, reg
->reg
& 0xff);
887 reg
->val
= avlink_read(sd
, reg
->reg
& 0xff);
890 reg
->val
= cec_read(sd
, reg
->reg
& 0xff);
893 reg
->val
= infoframe_read(sd
, reg
->reg
& 0xff);
896 reg
->val
= sdp_io_read(sd
, reg
->reg
& 0xff);
899 reg
->val
= sdp_read(sd
, reg
->reg
& 0xff);
902 reg
->val
= afe_read(sd
, reg
->reg
& 0xff);
905 reg
->val
= rep_read(sd
, reg
->reg
& 0xff);
908 reg
->val
= edid_read(sd
, reg
->reg
& 0xff);
911 reg
->val
= hdmi_read(sd
, reg
->reg
& 0xff);
914 reg
->val
= cp_read(sd
, reg
->reg
& 0xff);
917 reg
->val
= vdp_read(sd
, reg
->reg
& 0xff);
920 v4l2_info(sd
, "Register %03llx not supported\n", reg
->reg
);
921 adv7842_inv_register(sd
);
927 static int adv7842_s_register(struct v4l2_subdev
*sd
,
928 const struct v4l2_dbg_register
*reg
)
930 u8 val
= reg
->val
& 0xff;
932 switch (reg
->reg
>> 8) {
934 io_write(sd
, reg
->reg
& 0xff, val
);
937 avlink_write(sd
, reg
->reg
& 0xff, val
);
940 cec_write(sd
, reg
->reg
& 0xff, val
);
943 infoframe_write(sd
, reg
->reg
& 0xff, val
);
946 sdp_io_write(sd
, reg
->reg
& 0xff, val
);
949 sdp_write(sd
, reg
->reg
& 0xff, val
);
952 afe_write(sd
, reg
->reg
& 0xff, val
);
955 rep_write(sd
, reg
->reg
& 0xff, val
);
958 edid_write(sd
, reg
->reg
& 0xff, val
);
961 hdmi_write(sd
, reg
->reg
& 0xff, val
);
964 cp_write(sd
, reg
->reg
& 0xff, val
);
967 vdp_write(sd
, reg
->reg
& 0xff, val
);
970 v4l2_info(sd
, "Register %03llx not supported\n", reg
->reg
);
971 adv7842_inv_register(sd
);
978 static int adv7842_s_detect_tx_5v_ctrl(struct v4l2_subdev
*sd
)
980 struct adv7842_state
*state
= to_state(sd
);
981 u16 cable_det
= adv7842_read_cable_det(sd
);
983 v4l2_dbg(1, debug
, sd
, "%s: 0x%x\n", __func__
, cable_det
);
985 return v4l2_ctrl_s_ctrl(state
->detect_tx_5v_ctrl
, cable_det
);
988 static int find_and_set_predefined_video_timings(struct v4l2_subdev
*sd
,
990 const struct adv7842_video_standards
*predef_vid_timings
,
991 const struct v4l2_dv_timings
*timings
)
995 for (i
= 0; predef_vid_timings
[i
].timings
.bt
.width
; i
++) {
996 if (!v4l2_match_dv_timings(timings
, &predef_vid_timings
[i
].timings
,
997 is_digital_input(sd
) ? 250000 : 1000000, false))
1000 io_write(sd
, 0x00, predef_vid_timings
[i
].vid_std
);
1001 /* v_freq and prim mode */
1002 io_write(sd
, 0x01, (predef_vid_timings
[i
].v_freq
<< 4) + prim_mode
);
1009 static int configure_predefined_video_timings(struct v4l2_subdev
*sd
,
1010 struct v4l2_dv_timings
*timings
)
1012 struct adv7842_state
*state
= to_state(sd
);
1015 v4l2_dbg(1, debug
, sd
, "%s\n", __func__
);
1017 /* reset to default values */
1018 io_write(sd
, 0x16, 0x43);
1019 io_write(sd
, 0x17, 0x5a);
1020 /* disable embedded syncs for auto graphics mode */
1021 cp_write_and_or(sd
, 0x81, 0xef, 0x00);
1022 cp_write(sd
, 0x26, 0x00);
1023 cp_write(sd
, 0x27, 0x00);
1024 cp_write(sd
, 0x28, 0x00);
1025 cp_write(sd
, 0x29, 0x00);
1026 cp_write(sd
, 0x8f, 0x40);
1027 cp_write(sd
, 0x90, 0x00);
1028 cp_write(sd
, 0xa5, 0x00);
1029 cp_write(sd
, 0xa6, 0x00);
1030 cp_write(sd
, 0xa7, 0x00);
1031 cp_write(sd
, 0xab, 0x00);
1032 cp_write(sd
, 0xac, 0x00);
1034 switch (state
->mode
) {
1035 case ADV7842_MODE_COMP
:
1036 case ADV7842_MODE_RGB
:
1037 err
= find_and_set_predefined_video_timings(sd
,
1038 0x01, adv7842_prim_mode_comp
, timings
);
1040 err
= find_and_set_predefined_video_timings(sd
,
1041 0x02, adv7842_prim_mode_gr
, timings
);
1043 case ADV7842_MODE_HDMI
:
1044 err
= find_and_set_predefined_video_timings(sd
,
1045 0x05, adv7842_prim_mode_hdmi_comp
, timings
);
1047 err
= find_and_set_predefined_video_timings(sd
,
1048 0x06, adv7842_prim_mode_hdmi_gr
, timings
);
1051 v4l2_dbg(2, debug
, sd
, "%s: Unknown mode %d\n",
1052 __func__
, state
->mode
);
1061 static void configure_custom_video_timings(struct v4l2_subdev
*sd
,
1062 const struct v4l2_bt_timings
*bt
)
1064 struct adv7842_state
*state
= to_state(sd
);
1065 struct i2c_client
*client
= v4l2_get_subdevdata(sd
);
1066 u32 width
= htotal(bt
);
1067 u32 height
= vtotal(bt
);
1068 u16 cp_start_sav
= bt
->hsync
+ bt
->hbackporch
- 4;
1069 u16 cp_start_eav
= width
- bt
->hfrontporch
;
1070 u16 cp_start_vbi
= height
- bt
->vfrontporch
+ 1;
1071 u16 cp_end_vbi
= bt
->vsync
+ bt
->vbackporch
+ 1;
1072 u16 ch1_fr_ll
= (((u32
)bt
->pixelclock
/ 100) > 0) ?
1073 ((width
* (ADV7842_fsc
/ 100)) / ((u32
)bt
->pixelclock
/ 100)) : 0;
1075 0xc0 | ((width
>> 8) & 0x1f),
1079 v4l2_dbg(2, debug
, sd
, "%s\n", __func__
);
1081 switch (state
->mode
) {
1082 case ADV7842_MODE_COMP
:
1083 case ADV7842_MODE_RGB
:
1085 io_write(sd
, 0x00, 0x07); /* video std */
1086 io_write(sd
, 0x01, 0x02); /* prim mode */
1087 /* enable embedded syncs for auto graphics mode */
1088 cp_write_and_or(sd
, 0x81, 0xef, 0x10);
1090 /* Should only be set in auto-graphics mode [REF_02, p. 91-92] */
1091 /* setup PLL_DIV_MAN_EN and PLL_DIV_RATIO */
1092 /* IO-map reg. 0x16 and 0x17 should be written in sequence */
1093 if (adv_smbus_write_i2c_block_data(client
, 0x16, 2, pll
)) {
1094 v4l2_err(sd
, "writing to reg 0x16 and 0x17 failed\n");
1098 /* active video - horizontal timing */
1099 cp_write(sd
, 0x26, (cp_start_sav
>> 8) & 0xf);
1100 cp_write(sd
, 0x27, (cp_start_sav
& 0xff));
1101 cp_write(sd
, 0x28, (cp_start_eav
>> 8) & 0xf);
1102 cp_write(sd
, 0x29, (cp_start_eav
& 0xff));
1104 /* active video - vertical timing */
1105 cp_write(sd
, 0xa5, (cp_start_vbi
>> 4) & 0xff);
1106 cp_write(sd
, 0xa6, ((cp_start_vbi
& 0xf) << 4) |
1107 ((cp_end_vbi
>> 8) & 0xf));
1108 cp_write(sd
, 0xa7, cp_end_vbi
& 0xff);
1110 case ADV7842_MODE_HDMI
:
1111 /* set default prim_mode/vid_std for HDMI
1112 according to [REF_03, c. 4.2] */
1113 io_write(sd
, 0x00, 0x02); /* video std */
1114 io_write(sd
, 0x01, 0x06); /* prim mode */
1117 v4l2_dbg(2, debug
, sd
, "%s: Unknown mode %d\n",
1118 __func__
, state
->mode
);
1122 cp_write(sd
, 0x8f, (ch1_fr_ll
>> 8) & 0x7);
1123 cp_write(sd
, 0x90, ch1_fr_ll
& 0xff);
1124 cp_write(sd
, 0xab, (height
>> 4) & 0xff);
1125 cp_write(sd
, 0xac, (height
& 0x0f) << 4);
1128 static void adv7842_set_offset(struct v4l2_subdev
*sd
, bool auto_offset
, u16 offset_a
, u16 offset_b
, u16 offset_c
)
1130 struct adv7842_state
*state
= to_state(sd
);
1139 v4l2_dbg(2, debug
, sd
, "%s: %s offset: a = 0x%x, b = 0x%x, c = 0x%x\n",
1140 __func__
, auto_offset
? "Auto" : "Manual",
1141 offset_a
, offset_b
, offset_c
);
1143 offset_buf
[0]= (cp_read(sd
, 0x77) & 0xc0) | ((offset_a
& 0x3f0) >> 4);
1144 offset_buf
[1] = ((offset_a
& 0x00f) << 4) | ((offset_b
& 0x3c0) >> 6);
1145 offset_buf
[2] = ((offset_b
& 0x03f) << 2) | ((offset_c
& 0x300) >> 8);
1146 offset_buf
[3] = offset_c
& 0x0ff;
1148 /* Registers must be written in this order with no i2c access in between */
1149 if (adv_smbus_write_i2c_block_data(state
->i2c_cp
, 0x77, 4, offset_buf
))
1150 v4l2_err(sd
, "%s: i2c error writing to CP reg 0x77, 0x78, 0x79, 0x7a\n", __func__
);
1153 static void adv7842_set_gain(struct v4l2_subdev
*sd
, bool auto_gain
, u16 gain_a
, u16 gain_b
, u16 gain_c
)
1155 struct adv7842_state
*state
= to_state(sd
);
1158 u8 agc_mode_man
= 1;
1168 v4l2_dbg(2, debug
, sd
, "%s: %s gain: a = 0x%x, b = 0x%x, c = 0x%x\n",
1169 __func__
, auto_gain
? "Auto" : "Manual",
1170 gain_a
, gain_b
, gain_c
);
1172 gain_buf
[0] = ((gain_man
<< 7) | (agc_mode_man
<< 6) | ((gain_a
& 0x3f0) >> 4));
1173 gain_buf
[1] = (((gain_a
& 0x00f) << 4) | ((gain_b
& 0x3c0) >> 6));
1174 gain_buf
[2] = (((gain_b
& 0x03f) << 2) | ((gain_c
& 0x300) >> 8));
1175 gain_buf
[3] = ((gain_c
& 0x0ff));
1177 /* Registers must be written in this order with no i2c access in between */
1178 if (adv_smbus_write_i2c_block_data(state
->i2c_cp
, 0x73, 4, gain_buf
))
1179 v4l2_err(sd
, "%s: i2c error writing to CP reg 0x73, 0x74, 0x75, 0x76\n", __func__
);
1182 static void set_rgb_quantization_range(struct v4l2_subdev
*sd
)
1184 struct adv7842_state
*state
= to_state(sd
);
1185 bool rgb_output
= io_read(sd
, 0x02) & 0x02;
1186 bool hdmi_signal
= hdmi_read(sd
, 0x05) & 0x80;
1187 u8 y
= HDMI_COLORSPACE_RGB
;
1189 if (hdmi_signal
&& (io_read(sd
, 0x60) & 1))
1190 y
= infoframe_read(sd
, 0x01) >> 5;
1192 v4l2_dbg(2, debug
, sd
, "%s: RGB quantization range: %d, RGB out: %d, HDMI: %d\n",
1193 __func__
, state
->rgb_quantization_range
,
1194 rgb_output
, hdmi_signal
);
1196 adv7842_set_gain(sd
, true, 0x0, 0x0, 0x0);
1197 adv7842_set_offset(sd
, true, 0x0, 0x0, 0x0);
1198 io_write_clr_set(sd
, 0x02, 0x04, rgb_output
? 0 : 4);
1200 switch (state
->rgb_quantization_range
) {
1201 case V4L2_DV_RGB_RANGE_AUTO
:
1202 if (state
->mode
== ADV7842_MODE_RGB
) {
1203 /* Receiving analog RGB signal
1204 * Set RGB full range (0-255) */
1205 io_write_and_or(sd
, 0x02, 0x0f, 0x10);
1209 if (state
->mode
== ADV7842_MODE_COMP
) {
1210 /* Receiving analog YPbPr signal
1212 io_write_and_or(sd
, 0x02, 0x0f, 0xf0);
1217 /* Receiving HDMI signal
1219 io_write_and_or(sd
, 0x02, 0x0f, 0xf0);
1223 /* Receiving DVI-D signal
1224 * ADV7842 selects RGB limited range regardless of
1225 * input format (CE/IT) in automatic mode */
1226 if (state
->timings
.bt
.flags
& V4L2_DV_FL_IS_CE_VIDEO
) {
1227 /* RGB limited range (16-235) */
1228 io_write_and_or(sd
, 0x02, 0x0f, 0x00);
1230 /* RGB full range (0-255) */
1231 io_write_and_or(sd
, 0x02, 0x0f, 0x10);
1233 if (is_digital_input(sd
) && rgb_output
) {
1234 adv7842_set_offset(sd
, false, 0x40, 0x40, 0x40);
1236 adv7842_set_gain(sd
, false, 0xe0, 0xe0, 0xe0);
1237 adv7842_set_offset(sd
, false, 0x70, 0x70, 0x70);
1241 case V4L2_DV_RGB_RANGE_LIMITED
:
1242 if (state
->mode
== ADV7842_MODE_COMP
) {
1243 /* YCrCb limited range (16-235) */
1244 io_write_and_or(sd
, 0x02, 0x0f, 0x20);
1248 if (y
!= HDMI_COLORSPACE_RGB
)
1251 /* RGB limited range (16-235) */
1252 io_write_and_or(sd
, 0x02, 0x0f, 0x00);
1255 case V4L2_DV_RGB_RANGE_FULL
:
1256 if (state
->mode
== ADV7842_MODE_COMP
) {
1257 /* YCrCb full range (0-255) */
1258 io_write_and_or(sd
, 0x02, 0x0f, 0x60);
1262 if (y
!= HDMI_COLORSPACE_RGB
)
1265 /* RGB full range (0-255) */
1266 io_write_and_or(sd
, 0x02, 0x0f, 0x10);
1268 if (is_analog_input(sd
) || hdmi_signal
)
1271 /* Adjust gain/offset for DVI-D signals only */
1273 adv7842_set_offset(sd
, false, 0x40, 0x40, 0x40);
1275 adv7842_set_gain(sd
, false, 0xe0, 0xe0, 0xe0);
1276 adv7842_set_offset(sd
, false, 0x70, 0x70, 0x70);
1282 static int adv7842_s_ctrl(struct v4l2_ctrl
*ctrl
)
1284 struct v4l2_subdev
*sd
= to_sd(ctrl
);
1285 struct adv7842_state
*state
= to_state(sd
);
1288 contrast/brightness/hue/free run is acting a bit strange,
1289 not sure if sdp csc is correct.
1292 /* standard ctrls */
1293 case V4L2_CID_BRIGHTNESS
:
1294 cp_write(sd
, 0x3c, ctrl
->val
);
1295 sdp_write(sd
, 0x14, ctrl
->val
);
1296 /* ignore lsb sdp 0x17[3:2] */
1298 case V4L2_CID_CONTRAST
:
1299 cp_write(sd
, 0x3a, ctrl
->val
);
1300 sdp_write(sd
, 0x13, ctrl
->val
);
1301 /* ignore lsb sdp 0x17[1:0] */
1303 case V4L2_CID_SATURATION
:
1304 cp_write(sd
, 0x3b, ctrl
->val
);
1305 sdp_write(sd
, 0x15, ctrl
->val
);
1306 /* ignore lsb sdp 0x17[5:4] */
1309 cp_write(sd
, 0x3d, ctrl
->val
);
1310 sdp_write(sd
, 0x16, ctrl
->val
);
1311 /* ignore lsb sdp 0x17[7:6] */
1314 case V4L2_CID_ADV_RX_ANALOG_SAMPLING_PHASE
:
1315 afe_write(sd
, 0xc8, ctrl
->val
);
1317 case V4L2_CID_ADV_RX_FREE_RUN_COLOR_MANUAL
:
1318 cp_write_and_or(sd
, 0xbf, ~0x04, (ctrl
->val
<< 2));
1319 sdp_write_and_or(sd
, 0xdd, ~0x04, (ctrl
->val
<< 2));
1321 case V4L2_CID_ADV_RX_FREE_RUN_COLOR
: {
1322 u8 R
= (ctrl
->val
& 0xff0000) >> 16;
1323 u8 G
= (ctrl
->val
& 0x00ff00) >> 8;
1324 u8 B
= (ctrl
->val
& 0x0000ff);
1325 /* RGB -> YUV, numerical approximation */
1326 int Y
= 66 * R
+ 129 * G
+ 25 * B
;
1327 int U
= -38 * R
- 74 * G
+ 112 * B
;
1328 int V
= 112 * R
- 94 * G
- 18 * B
;
1330 /* Scale down to 8 bits with rounding */
1334 /* make U,V positive */
1339 v4l2_dbg(1, debug
, sd
, "R %x, G %x, B %x\n", R
, G
, B
);
1340 v4l2_dbg(1, debug
, sd
, "Y %x, U %x, V %x\n", Y
, U
, V
);
1343 cp_write(sd
, 0xc1, R
);
1344 cp_write(sd
, 0xc0, G
);
1345 cp_write(sd
, 0xc2, B
);
1347 sdp_write(sd
, 0xde, Y
);
1348 sdp_write(sd
, 0xdf, (V
& 0xf0) | ((U
>> 4) & 0x0f));
1351 case V4L2_CID_DV_RX_RGB_RANGE
:
1352 state
->rgb_quantization_range
= ctrl
->val
;
1353 set_rgb_quantization_range(sd
);
1359 static int adv7842_g_volatile_ctrl(struct v4l2_ctrl
*ctrl
)
1361 struct v4l2_subdev
*sd
= to_sd(ctrl
);
1363 if (ctrl
->id
== V4L2_CID_DV_RX_IT_CONTENT_TYPE
) {
1364 ctrl
->val
= V4L2_DV_IT_CONTENT_TYPE_NO_ITC
;
1365 if ((io_read(sd
, 0x60) & 1) && (infoframe_read(sd
, 0x03) & 0x80))
1366 ctrl
->val
= (infoframe_read(sd
, 0x05) >> 4) & 3;
1372 static inline bool no_power(struct v4l2_subdev
*sd
)
1374 return io_read(sd
, 0x0c) & 0x24;
1377 static inline bool no_cp_signal(struct v4l2_subdev
*sd
)
1379 return ((cp_read(sd
, 0xb5) & 0xd0) != 0xd0) || !(cp_read(sd
, 0xb1) & 0x80);
1382 static inline bool is_hdmi(struct v4l2_subdev
*sd
)
1384 return hdmi_read(sd
, 0x05) & 0x80;
1387 static int adv7842_g_input_status(struct v4l2_subdev
*sd
, u32
*status
)
1389 struct adv7842_state
*state
= to_state(sd
);
1393 if (io_read(sd
, 0x0c) & 0x24)
1394 *status
|= V4L2_IN_ST_NO_POWER
;
1396 if (state
->mode
== ADV7842_MODE_SDP
) {
1397 /* status from SDP block */
1398 if (!(sdp_read(sd
, 0x5A) & 0x01))
1399 *status
|= V4L2_IN_ST_NO_SIGNAL
;
1401 v4l2_dbg(1, debug
, sd
, "%s: SDP status = 0x%x\n",
1405 /* status from CP block */
1406 if ((cp_read(sd
, 0xb5) & 0xd0) != 0xd0 ||
1407 !(cp_read(sd
, 0xb1) & 0x80))
1408 /* TODO channel 2 */
1409 *status
|= V4L2_IN_ST_NO_SIGNAL
;
1411 if (is_digital_input(sd
) && ((io_read(sd
, 0x74) & 0x03) != 0x03))
1412 *status
|= V4L2_IN_ST_NO_SIGNAL
;
1414 v4l2_dbg(1, debug
, sd
, "%s: CP status = 0x%x\n",
1420 struct stdi_readback
{
1426 static int stdi2dv_timings(struct v4l2_subdev
*sd
,
1427 struct stdi_readback
*stdi
,
1428 struct v4l2_dv_timings
*timings
)
1430 struct adv7842_state
*state
= to_state(sd
);
1431 u32 hfreq
= (ADV7842_fsc
* 8) / stdi
->bl
;
1435 for (i
= 0; v4l2_dv_timings_presets
[i
].bt
.width
; i
++) {
1436 const struct v4l2_bt_timings
*bt
= &v4l2_dv_timings_presets
[i
].bt
;
1438 if (!v4l2_valid_dv_timings(&v4l2_dv_timings_presets
[i
],
1439 adv7842_get_dv_timings_cap(sd
),
1440 adv7842_check_dv_timings
, NULL
))
1442 if (vtotal(bt
) != stdi
->lcf
+ 1)
1444 if (bt
->vsync
!= stdi
->lcvs
)
1447 pix_clk
= hfreq
* htotal(bt
);
1449 if ((pix_clk
< bt
->pixelclock
+ 1000000) &&
1450 (pix_clk
> bt
->pixelclock
- 1000000)) {
1451 *timings
= v4l2_dv_timings_presets
[i
];
1456 if (v4l2_detect_cvt(stdi
->lcf
+ 1, hfreq
, stdi
->lcvs
, 0,
1457 (stdi
->hs_pol
== '+' ? V4L2_DV_HSYNC_POS_POL
: 0) |
1458 (stdi
->vs_pol
== '+' ? V4L2_DV_VSYNC_POS_POL
: 0),
1461 if (v4l2_detect_gtf(stdi
->lcf
+ 1, hfreq
, stdi
->lcvs
,
1462 (stdi
->hs_pol
== '+' ? V4L2_DV_HSYNC_POS_POL
: 0) |
1463 (stdi
->vs_pol
== '+' ? V4L2_DV_VSYNC_POS_POL
: 0),
1464 false, state
->aspect_ratio
, timings
))
1467 v4l2_dbg(2, debug
, sd
,
1468 "%s: No format candidate found for lcvs = %d, lcf=%d, bl = %d, %chsync, %cvsync\n",
1469 __func__
, stdi
->lcvs
, stdi
->lcf
, stdi
->bl
,
1470 stdi
->hs_pol
, stdi
->vs_pol
);
1474 static int read_stdi(struct v4l2_subdev
*sd
, struct stdi_readback
*stdi
)
1478 adv7842_g_input_status(sd
, &status
);
1479 if (status
& V4L2_IN_ST_NO_SIGNAL
) {
1480 v4l2_dbg(2, debug
, sd
, "%s: no signal\n", __func__
);
1484 stdi
->bl
= ((cp_read(sd
, 0xb1) & 0x3f) << 8) | cp_read(sd
, 0xb2);
1485 stdi
->lcf
= ((cp_read(sd
, 0xb3) & 0x7) << 8) | cp_read(sd
, 0xb4);
1486 stdi
->lcvs
= cp_read(sd
, 0xb3) >> 3;
1488 if ((cp_read(sd
, 0xb5) & 0x80) && ((cp_read(sd
, 0xb5) & 0x03) == 0x01)) {
1489 stdi
->hs_pol
= ((cp_read(sd
, 0xb5) & 0x10) ?
1490 ((cp_read(sd
, 0xb5) & 0x08) ? '+' : '-') : 'x');
1491 stdi
->vs_pol
= ((cp_read(sd
, 0xb5) & 0x40) ?
1492 ((cp_read(sd
, 0xb5) & 0x20) ? '+' : '-') : 'x');
1497 stdi
->interlaced
= (cp_read(sd
, 0xb1) & 0x40) ? true : false;
1499 if (stdi
->lcf
< 239 || stdi
->bl
< 8 || stdi
->bl
== 0x3fff) {
1500 v4l2_dbg(2, debug
, sd
, "%s: invalid signal\n", __func__
);
1504 v4l2_dbg(2, debug
, sd
,
1505 "%s: lcf (frame height - 1) = %d, bl = %d, lcvs (vsync) = %d, %chsync, %cvsync, %s\n",
1506 __func__
, stdi
->lcf
, stdi
->bl
, stdi
->lcvs
,
1507 stdi
->hs_pol
, stdi
->vs_pol
,
1508 stdi
->interlaced
? "interlaced" : "progressive");
1513 static int adv7842_enum_dv_timings(struct v4l2_subdev
*sd
,
1514 struct v4l2_enum_dv_timings
*timings
)
1516 if (timings
->pad
!= 0)
1519 return v4l2_enum_dv_timings_cap(timings
,
1520 adv7842_get_dv_timings_cap(sd
), adv7842_check_dv_timings
, NULL
);
1523 static int adv7842_dv_timings_cap(struct v4l2_subdev
*sd
,
1524 struct v4l2_dv_timings_cap
*cap
)
1529 *cap
= *adv7842_get_dv_timings_cap(sd
);
1533 /* Fill the optional fields .standards and .flags in struct v4l2_dv_timings
1534 if the format is listed in adv7842_timings[] */
1535 static void adv7842_fill_optional_dv_timings_fields(struct v4l2_subdev
*sd
,
1536 struct v4l2_dv_timings
*timings
)
1538 v4l2_find_dv_timings_cap(timings
, adv7842_get_dv_timings_cap(sd
),
1539 is_digital_input(sd
) ? 250000 : 1000000,
1540 adv7842_check_dv_timings
, NULL
);
1543 static int adv7842_query_dv_timings(struct v4l2_subdev
*sd
,
1544 struct v4l2_dv_timings
*timings
)
1546 struct adv7842_state
*state
= to_state(sd
);
1547 struct v4l2_bt_timings
*bt
= &timings
->bt
;
1548 struct stdi_readback stdi
= { 0 };
1550 v4l2_dbg(1, debug
, sd
, "%s:\n", __func__
);
1552 memset(timings
, 0, sizeof(struct v4l2_dv_timings
));
1555 if (state
->mode
== ADV7842_MODE_SDP
)
1559 if (read_stdi(sd
, &stdi
)) {
1560 state
->restart_stdi_once
= true;
1561 v4l2_dbg(1, debug
, sd
, "%s: no valid signal\n", __func__
);
1564 bt
->interlaced
= stdi
.interlaced
?
1565 V4L2_DV_INTERLACED
: V4L2_DV_PROGRESSIVE
;
1566 bt
->standards
= V4L2_DV_BT_STD_CEA861
| V4L2_DV_BT_STD_DMT
|
1567 V4L2_DV_BT_STD_GTF
| V4L2_DV_BT_STD_CVT
;
1569 if (is_digital_input(sd
)) {
1572 timings
->type
= V4L2_DV_BT_656_1120
;
1574 bt
->width
= (hdmi_read(sd
, 0x07) & 0x0f) * 256 + hdmi_read(sd
, 0x08);
1575 bt
->height
= (hdmi_read(sd
, 0x09) & 0x0f) * 256 + hdmi_read(sd
, 0x0a);
1576 freq
= ((hdmi_read(sd
, 0x51) << 1) + (hdmi_read(sd
, 0x52) >> 7)) * 1000000;
1577 freq
+= ((hdmi_read(sd
, 0x52) & 0x7f) * 7813);
1579 /* adjust for deep color mode */
1580 freq
= freq
* 8 / (((hdmi_read(sd
, 0x0b) & 0xc0) >> 6) * 2 + 8);
1582 bt
->pixelclock
= freq
;
1583 bt
->hfrontporch
= (hdmi_read(sd
, 0x20) & 0x03) * 256 +
1584 hdmi_read(sd
, 0x21);
1585 bt
->hsync
= (hdmi_read(sd
, 0x22) & 0x03) * 256 +
1586 hdmi_read(sd
, 0x23);
1587 bt
->hbackporch
= (hdmi_read(sd
, 0x24) & 0x03) * 256 +
1588 hdmi_read(sd
, 0x25);
1589 bt
->vfrontporch
= ((hdmi_read(sd
, 0x2a) & 0x1f) * 256 +
1590 hdmi_read(sd
, 0x2b)) / 2;
1591 bt
->vsync
= ((hdmi_read(sd
, 0x2e) & 0x1f) * 256 +
1592 hdmi_read(sd
, 0x2f)) / 2;
1593 bt
->vbackporch
= ((hdmi_read(sd
, 0x32) & 0x1f) * 256 +
1594 hdmi_read(sd
, 0x33)) / 2;
1595 bt
->polarities
= ((hdmi_read(sd
, 0x05) & 0x10) ? V4L2_DV_VSYNC_POS_POL
: 0) |
1596 ((hdmi_read(sd
, 0x05) & 0x20) ? V4L2_DV_HSYNC_POS_POL
: 0);
1597 if (bt
->interlaced
== V4L2_DV_INTERLACED
) {
1598 bt
->height
+= (hdmi_read(sd
, 0x0b) & 0x0f) * 256 +
1599 hdmi_read(sd
, 0x0c);
1600 bt
->il_vfrontporch
= ((hdmi_read(sd
, 0x2c) & 0x1f) * 256 +
1601 hdmi_read(sd
, 0x2d)) / 2;
1602 bt
->il_vsync
= ((hdmi_read(sd
, 0x30) & 0x1f) * 256 +
1603 hdmi_read(sd
, 0x31)) / 2;
1604 bt
->il_vbackporch
= ((hdmi_read(sd
, 0x34) & 0x1f) * 256 +
1605 hdmi_read(sd
, 0x35)) / 2;
1607 bt
->il_vfrontporch
= 0;
1609 bt
->il_vbackporch
= 0;
1611 adv7842_fill_optional_dv_timings_fields(sd
, timings
);
1614 * Since LCVS values are inaccurate [REF_03, p. 339-340],
1615 * stdi2dv_timings() is called with lcvs +-1 if the first attempt fails.
1617 if (!stdi2dv_timings(sd
, &stdi
, timings
))
1620 v4l2_dbg(1, debug
, sd
, "%s: lcvs + 1 = %d\n", __func__
, stdi
.lcvs
);
1621 if (!stdi2dv_timings(sd
, &stdi
, timings
))
1624 v4l2_dbg(1, debug
, sd
, "%s: lcvs - 1 = %d\n", __func__
, stdi
.lcvs
);
1625 if (stdi2dv_timings(sd
, &stdi
, timings
)) {
1627 * The STDI block may measure wrong values, especially
1628 * for lcvs and lcf. If the driver can not find any
1629 * valid timing, the STDI block is restarted to measure
1630 * the video timings again. The function will return an
1631 * error, but the restart of STDI will generate a new
1632 * STDI interrupt and the format detection process will
1635 if (state
->restart_stdi_once
) {
1636 v4l2_dbg(1, debug
, sd
, "%s: restart STDI\n", __func__
);
1637 /* TODO restart STDI for Sync Channel 2 */
1638 /* enter one-shot mode */
1639 cp_write_and_or(sd
, 0x86, 0xf9, 0x00);
1640 /* trigger STDI restart */
1641 cp_write_and_or(sd
, 0x86, 0xf9, 0x04);
1642 /* reset to continuous mode */
1643 cp_write_and_or(sd
, 0x86, 0xf9, 0x02);
1644 state
->restart_stdi_once
= false;
1647 v4l2_dbg(1, debug
, sd
, "%s: format not supported\n", __func__
);
1650 state
->restart_stdi_once
= true;
1655 v4l2_print_dv_timings(sd
->name
, "adv7842_query_dv_timings:",
1660 static int adv7842_s_dv_timings(struct v4l2_subdev
*sd
,
1661 struct v4l2_dv_timings
*timings
)
1663 struct adv7842_state
*state
= to_state(sd
);
1664 struct v4l2_bt_timings
*bt
;
1667 v4l2_dbg(1, debug
, sd
, "%s:\n", __func__
);
1669 if (state
->mode
== ADV7842_MODE_SDP
)
1672 if (v4l2_match_dv_timings(&state
->timings
, timings
, 0, false)) {
1673 v4l2_dbg(1, debug
, sd
, "%s: no change\n", __func__
);
1679 if (!v4l2_valid_dv_timings(timings
, adv7842_get_dv_timings_cap(sd
),
1680 adv7842_check_dv_timings
, NULL
))
1683 adv7842_fill_optional_dv_timings_fields(sd
, timings
);
1685 state
->timings
= *timings
;
1687 cp_write(sd
, 0x91, bt
->interlaced
? 0x40 : 0x00);
1689 /* Use prim_mode and vid_std when available */
1690 err
= configure_predefined_video_timings(sd
, timings
);
1692 /* custom settings when the video format
1693 does not have prim_mode/vid_std */
1694 configure_custom_video_timings(sd
, bt
);
1697 set_rgb_quantization_range(sd
);
1701 v4l2_print_dv_timings(sd
->name
, "adv7842_s_dv_timings: ",
1706 static int adv7842_g_dv_timings(struct v4l2_subdev
*sd
,
1707 struct v4l2_dv_timings
*timings
)
1709 struct adv7842_state
*state
= to_state(sd
);
1711 if (state
->mode
== ADV7842_MODE_SDP
)
1713 *timings
= state
->timings
;
1717 static void enable_input(struct v4l2_subdev
*sd
)
1719 struct adv7842_state
*state
= to_state(sd
);
1721 set_rgb_quantization_range(sd
);
1722 switch (state
->mode
) {
1723 case ADV7842_MODE_SDP
:
1724 case ADV7842_MODE_COMP
:
1725 case ADV7842_MODE_RGB
:
1726 io_write(sd
, 0x15, 0xb0); /* Disable Tristate of Pins (no audio) */
1728 case ADV7842_MODE_HDMI
:
1729 hdmi_write(sd
, 0x01, 0x00); /* Enable HDMI clock terminators */
1730 io_write(sd
, 0x15, 0xa0); /* Disable Tristate of Pins */
1731 hdmi_write_and_or(sd
, 0x1a, 0xef, 0x00); /* Unmute audio */
1734 v4l2_dbg(2, debug
, sd
, "%s: Unknown mode %d\n",
1735 __func__
, state
->mode
);
1740 static void disable_input(struct v4l2_subdev
*sd
)
1742 hdmi_write_and_or(sd
, 0x1a, 0xef, 0x10); /* Mute audio [REF_01, c. 2.2.2] */
1743 msleep(16); /* 512 samples with >= 32 kHz sample rate [REF_03, c. 8.29] */
1744 io_write(sd
, 0x15, 0xbe); /* Tristate all outputs from video core */
1745 hdmi_write(sd
, 0x01, 0x78); /* Disable HDMI clock terminators */
1748 static void sdp_csc_coeff(struct v4l2_subdev
*sd
,
1749 const struct adv7842_sdp_csc_coeff
*c
)
1751 /* csc auto/manual */
1752 sdp_io_write_and_or(sd
, 0xe0, 0xbf, c
->manual
? 0x00 : 0x40);
1758 sdp_io_write_and_or(sd
, 0xe0, 0x7f, c
->scaling
== 2 ? 0x80 : 0x00);
1761 sdp_io_write_and_or(sd
, 0xe0, 0xe0, c
->A1
>> 8);
1762 sdp_io_write(sd
, 0xe1, c
->A1
);
1763 sdp_io_write_and_or(sd
, 0xe2, 0xe0, c
->A2
>> 8);
1764 sdp_io_write(sd
, 0xe3, c
->A2
);
1765 sdp_io_write_and_or(sd
, 0xe4, 0xe0, c
->A3
>> 8);
1766 sdp_io_write(sd
, 0xe5, c
->A3
);
1769 sdp_io_write_and_or(sd
, 0xe6, 0x80, c
->A4
>> 8);
1770 sdp_io_write(sd
, 0xe7, c
->A4
);
1773 sdp_io_write_and_or(sd
, 0xe8, 0xe0, c
->B1
>> 8);
1774 sdp_io_write(sd
, 0xe9, c
->B1
);
1775 sdp_io_write_and_or(sd
, 0xea, 0xe0, c
->B2
>> 8);
1776 sdp_io_write(sd
, 0xeb, c
->B2
);
1777 sdp_io_write_and_or(sd
, 0xec, 0xe0, c
->B3
>> 8);
1778 sdp_io_write(sd
, 0xed, c
->B3
);
1781 sdp_io_write_and_or(sd
, 0xee, 0x80, c
->B4
>> 8);
1782 sdp_io_write(sd
, 0xef, c
->B4
);
1785 sdp_io_write_and_or(sd
, 0xf0, 0xe0, c
->C1
>> 8);
1786 sdp_io_write(sd
, 0xf1, c
->C1
);
1787 sdp_io_write_and_or(sd
, 0xf2, 0xe0, c
->C2
>> 8);
1788 sdp_io_write(sd
, 0xf3, c
->C2
);
1789 sdp_io_write_and_or(sd
, 0xf4, 0xe0, c
->C3
>> 8);
1790 sdp_io_write(sd
, 0xf5, c
->C3
);
1793 sdp_io_write_and_or(sd
, 0xf6, 0x80, c
->C4
>> 8);
1794 sdp_io_write(sd
, 0xf7, c
->C4
);
1797 static void select_input(struct v4l2_subdev
*sd
,
1798 enum adv7842_vid_std_select vid_std_select
)
1800 struct adv7842_state
*state
= to_state(sd
);
1802 switch (state
->mode
) {
1803 case ADV7842_MODE_SDP
:
1804 io_write(sd
, 0x00, vid_std_select
); /* video std: CVBS or YC mode */
1805 io_write(sd
, 0x01, 0); /* prim mode */
1806 /* enable embedded syncs for auto graphics mode */
1807 cp_write_and_or(sd
, 0x81, 0xef, 0x10);
1809 afe_write(sd
, 0x00, 0x00); /* power up ADC */
1810 afe_write(sd
, 0xc8, 0x00); /* phase control */
1812 io_write(sd
, 0xdd, 0x90); /* Manual 2x output clock */
1813 /* script says register 0xde, which don't exist in manual */
1815 /* Manual analog input muxing mode, CVBS (6.4)*/
1816 afe_write_and_or(sd
, 0x02, 0x7f, 0x80);
1817 if (vid_std_select
== ADV7842_SDP_VID_STD_CVBS_SD_4x1
) {
1818 afe_write(sd
, 0x03, 0xa0); /* ADC0 to AIN10 (CVBS), ADC1 N/C*/
1819 afe_write(sd
, 0x04, 0x00); /* ADC2 N/C,ADC3 N/C*/
1821 afe_write(sd
, 0x03, 0xa0); /* ADC0 to AIN10 (CVBS), ADC1 N/C*/
1822 afe_write(sd
, 0x04, 0xc0); /* ADC2 to AIN12, ADC3 N/C*/
1824 afe_write(sd
, 0x0c, 0x1f); /* ADI recommend write */
1825 afe_write(sd
, 0x12, 0x63); /* ADI recommend write */
1827 sdp_io_write(sd
, 0xb2, 0x60); /* Disable AV codes */
1828 sdp_io_write(sd
, 0xc8, 0xe3); /* Disable Ancillary data */
1830 /* SDP recommended settings */
1831 sdp_write(sd
, 0x00, 0x3F); /* Autodetect PAL NTSC (not SECAM) */
1832 sdp_write(sd
, 0x01, 0x00); /* Pedestal Off */
1834 sdp_write(sd
, 0x03, 0xE4); /* Manual VCR Gain Luma 0x40B */
1835 sdp_write(sd
, 0x04, 0x0B); /* Manual Luma setting */
1836 sdp_write(sd
, 0x05, 0xC3); /* Manual Chroma setting 0x3FE */
1837 sdp_write(sd
, 0x06, 0xFE); /* Manual Chroma setting */
1838 sdp_write(sd
, 0x12, 0x0D); /* Frame TBC,I_P, 3D comb enabled */
1839 sdp_write(sd
, 0xA7, 0x00); /* ADI Recommended Write */
1840 sdp_io_write(sd
, 0xB0, 0x00); /* Disable H and v blanking */
1842 /* deinterlacer enabled and 3D comb */
1843 sdp_write_and_or(sd
, 0x12, 0xf6, 0x09);
1847 case ADV7842_MODE_COMP
:
1848 case ADV7842_MODE_RGB
:
1849 /* Automatic analog input muxing mode */
1850 afe_write_and_or(sd
, 0x02, 0x7f, 0x00);
1851 /* set mode and select free run resolution */
1852 io_write(sd
, 0x00, vid_std_select
); /* video std */
1853 io_write(sd
, 0x01, 0x02); /* prim mode */
1854 cp_write_and_or(sd
, 0x81, 0xef, 0x10); /* enable embedded syncs
1855 for auto graphics mode */
1857 afe_write(sd
, 0x00, 0x00); /* power up ADC */
1858 afe_write(sd
, 0xc8, 0x00); /* phase control */
1859 if (state
->mode
== ADV7842_MODE_COMP
) {
1860 /* force to YCrCb */
1861 io_write_and_or(sd
, 0x02, 0x0f, 0x60);
1864 io_write_and_or(sd
, 0x02, 0x0f, 0x10);
1867 /* set ADI recommended settings for digitizer */
1868 /* "ADV7842 Register Settings Recommendations
1869 * (rev. 1.8, November 2010)" p. 9. */
1870 afe_write(sd
, 0x0c, 0x1f); /* ADC Range improvement */
1871 afe_write(sd
, 0x12, 0x63); /* ADC Range improvement */
1873 /* set to default gain for RGB */
1874 cp_write(sd
, 0x73, 0x10);
1875 cp_write(sd
, 0x74, 0x04);
1876 cp_write(sd
, 0x75, 0x01);
1877 cp_write(sd
, 0x76, 0x00);
1879 cp_write(sd
, 0x3e, 0x04); /* CP core pre-gain control */
1880 cp_write(sd
, 0xc3, 0x39); /* CP coast control. Graphics mode */
1881 cp_write(sd
, 0x40, 0x5c); /* CP core pre-gain control. Graphics mode */
1884 case ADV7842_MODE_HDMI
:
1885 /* Automatic analog input muxing mode */
1886 afe_write_and_or(sd
, 0x02, 0x7f, 0x00);
1887 /* set mode and select free run resolution */
1888 if (state
->hdmi_port_a
)
1889 hdmi_write(sd
, 0x00, 0x02); /* select port A */
1891 hdmi_write(sd
, 0x00, 0x03); /* select port B */
1892 io_write(sd
, 0x00, vid_std_select
); /* video std */
1893 io_write(sd
, 0x01, 5); /* prim mode */
1894 cp_write_and_or(sd
, 0x81, 0xef, 0x00); /* disable embedded syncs
1895 for auto graphics mode */
1897 /* set ADI recommended settings for HDMI: */
1898 /* "ADV7842 Register Settings Recommendations
1899 * (rev. 1.8, November 2010)" p. 3. */
1900 hdmi_write(sd
, 0xc0, 0x00);
1901 hdmi_write(sd
, 0x0d, 0x34); /* ADI recommended write */
1902 hdmi_write(sd
, 0x3d, 0x10); /* ADI recommended write */
1903 hdmi_write(sd
, 0x44, 0x85); /* TMDS PLL optimization */
1904 hdmi_write(sd
, 0x46, 0x1f); /* ADI recommended write */
1905 hdmi_write(sd
, 0x57, 0xb6); /* TMDS PLL optimization */
1906 hdmi_write(sd
, 0x58, 0x03); /* TMDS PLL optimization */
1907 hdmi_write(sd
, 0x60, 0x88); /* TMDS PLL optimization */
1908 hdmi_write(sd
, 0x61, 0x88); /* TMDS PLL optimization */
1909 hdmi_write(sd
, 0x6c, 0x18); /* Disable ISRC clearing bit,
1910 Improve robustness */
1911 hdmi_write(sd
, 0x75, 0x10); /* DDC drive strength */
1912 hdmi_write(sd
, 0x85, 0x1f); /* equaliser */
1913 hdmi_write(sd
, 0x87, 0x70); /* ADI recommended write */
1914 hdmi_write(sd
, 0x89, 0x04); /* equaliser */
1915 hdmi_write(sd
, 0x8a, 0x1e); /* equaliser */
1916 hdmi_write(sd
, 0x93, 0x04); /* equaliser */
1917 hdmi_write(sd
, 0x94, 0x1e); /* equaliser */
1918 hdmi_write(sd
, 0x99, 0xa1); /* ADI recommended write */
1919 hdmi_write(sd
, 0x9b, 0x09); /* ADI recommended write */
1920 hdmi_write(sd
, 0x9d, 0x02); /* equaliser */
1922 afe_write(sd
, 0x00, 0xff); /* power down ADC */
1923 afe_write(sd
, 0xc8, 0x40); /* phase control */
1925 /* set to default gain for HDMI */
1926 cp_write(sd
, 0x73, 0x10);
1927 cp_write(sd
, 0x74, 0x04);
1928 cp_write(sd
, 0x75, 0x01);
1929 cp_write(sd
, 0x76, 0x00);
1931 /* reset ADI recommended settings for digitizer */
1932 /* "ADV7842 Register Settings Recommendations
1933 * (rev. 2.5, June 2010)" p. 17. */
1934 afe_write(sd
, 0x12, 0xfb); /* ADC noise shaping filter controls */
1935 afe_write(sd
, 0x0c, 0x0d); /* CP core gain controls */
1936 cp_write(sd
, 0x3e, 0x00); /* CP core pre-gain control */
1938 /* CP coast control */
1939 cp_write(sd
, 0xc3, 0x33); /* Component mode */
1941 /* color space conversion, autodetect color space */
1942 io_write_and_or(sd
, 0x02, 0x0f, 0xf0);
1946 v4l2_dbg(2, debug
, sd
, "%s: Unknown mode %d\n",
1947 __func__
, state
->mode
);
1952 static int adv7842_s_routing(struct v4l2_subdev
*sd
,
1953 u32 input
, u32 output
, u32 config
)
1955 struct adv7842_state
*state
= to_state(sd
);
1957 v4l2_dbg(2, debug
, sd
, "%s: input %d\n", __func__
, input
);
1960 case ADV7842_SELECT_HDMI_PORT_A
:
1961 state
->mode
= ADV7842_MODE_HDMI
;
1962 state
->vid_std_select
= ADV7842_HDMI_COMP_VID_STD_HD_1250P
;
1963 state
->hdmi_port_a
= true;
1965 case ADV7842_SELECT_HDMI_PORT_B
:
1966 state
->mode
= ADV7842_MODE_HDMI
;
1967 state
->vid_std_select
= ADV7842_HDMI_COMP_VID_STD_HD_1250P
;
1968 state
->hdmi_port_a
= false;
1970 case ADV7842_SELECT_VGA_COMP
:
1971 state
->mode
= ADV7842_MODE_COMP
;
1972 state
->vid_std_select
= ADV7842_RGB_VID_STD_AUTO_GRAPH_MODE
;
1974 case ADV7842_SELECT_VGA_RGB
:
1975 state
->mode
= ADV7842_MODE_RGB
;
1976 state
->vid_std_select
= ADV7842_RGB_VID_STD_AUTO_GRAPH_MODE
;
1978 case ADV7842_SELECT_SDP_CVBS
:
1979 state
->mode
= ADV7842_MODE_SDP
;
1980 state
->vid_std_select
= ADV7842_SDP_VID_STD_CVBS_SD_4x1
;
1982 case ADV7842_SELECT_SDP_YC
:
1983 state
->mode
= ADV7842_MODE_SDP
;
1984 state
->vid_std_select
= ADV7842_SDP_VID_STD_YC_SD4_x1
;
1991 select_input(sd
, state
->vid_std_select
);
1994 v4l2_subdev_notify_event(sd
, &adv7842_ev_fmt
);
1999 static int adv7842_enum_mbus_code(struct v4l2_subdev
*sd
,
2000 struct v4l2_subdev_pad_config
*cfg
,
2001 struct v4l2_subdev_mbus_code_enum
*code
)
2003 if (code
->index
>= ARRAY_SIZE(adv7842_formats
))
2005 code
->code
= adv7842_formats
[code
->index
].code
;
2009 static void adv7842_fill_format(struct adv7842_state
*state
,
2010 struct v4l2_mbus_framefmt
*format
)
2012 memset(format
, 0, sizeof(*format
));
2014 format
->width
= state
->timings
.bt
.width
;
2015 format
->height
= state
->timings
.bt
.height
;
2016 format
->field
= V4L2_FIELD_NONE
;
2017 format
->colorspace
= V4L2_COLORSPACE_SRGB
;
2019 if (state
->timings
.bt
.flags
& V4L2_DV_FL_IS_CE_VIDEO
)
2020 format
->colorspace
= (state
->timings
.bt
.height
<= 576) ?
2021 V4L2_COLORSPACE_SMPTE170M
: V4L2_COLORSPACE_REC709
;
2025 * Compute the op_ch_sel value required to obtain on the bus the component order
2026 * corresponding to the selected format taking into account bus reordering
2027 * applied by the board at the output of the device.
2029 * The following table gives the op_ch_value from the format component order
2030 * (expressed as op_ch_sel value in column) and the bus reordering (expressed as
2031 * adv7842_bus_order value in row).
2033 * | GBR(0) GRB(1) BGR(2) RGB(3) BRG(4) RBG(5)
2034 * ----------+-------------------------------------------------
2035 * RGB (NOP) | GBR GRB BGR RGB BRG RBG
2036 * GRB (1-2) | BGR RGB GBR GRB RBG BRG
2037 * RBG (2-3) | GRB GBR BRG RBG BGR RGB
2038 * BGR (1-3) | RBG BRG RGB BGR GRB GBR
2039 * BRG (ROR) | BRG RBG GRB GBR RGB BGR
2040 * GBR (ROL) | RGB BGR RBG BRG GBR GRB
2042 static unsigned int adv7842_op_ch_sel(struct adv7842_state
*state
)
2044 #define _SEL(a, b, c, d, e, f) { \
2045 ADV7842_OP_CH_SEL_##a, ADV7842_OP_CH_SEL_##b, ADV7842_OP_CH_SEL_##c, \
2046 ADV7842_OP_CH_SEL_##d, ADV7842_OP_CH_SEL_##e, ADV7842_OP_CH_SEL_##f }
2047 #define _BUS(x) [ADV7842_BUS_ORDER_##x]
2049 static const unsigned int op_ch_sel
[6][6] = {
2050 _BUS(RGB
) /* NOP */ = _SEL(GBR
, GRB
, BGR
, RGB
, BRG
, RBG
),
2051 _BUS(GRB
) /* 1-2 */ = _SEL(BGR
, RGB
, GBR
, GRB
, RBG
, BRG
),
2052 _BUS(RBG
) /* 2-3 */ = _SEL(GRB
, GBR
, BRG
, RBG
, BGR
, RGB
),
2053 _BUS(BGR
) /* 1-3 */ = _SEL(RBG
, BRG
, RGB
, BGR
, GRB
, GBR
),
2054 _BUS(BRG
) /* ROR */ = _SEL(BRG
, RBG
, GRB
, GBR
, RGB
, BGR
),
2055 _BUS(GBR
) /* ROL */ = _SEL(RGB
, BGR
, RBG
, BRG
, GBR
, GRB
),
2058 return op_ch_sel
[state
->pdata
.bus_order
][state
->format
->op_ch_sel
>> 5];
2061 static void adv7842_setup_format(struct adv7842_state
*state
)
2063 struct v4l2_subdev
*sd
= &state
->sd
;
2065 io_write_clr_set(sd
, 0x02, 0x02,
2066 state
->format
->rgb_out
? ADV7842_RGB_OUT
: 0);
2067 io_write(sd
, 0x03, state
->format
->op_format_sel
|
2068 state
->pdata
.op_format_mode_sel
);
2069 io_write_clr_set(sd
, 0x04, 0xe0, adv7842_op_ch_sel(state
));
2070 io_write_clr_set(sd
, 0x05, 0x01,
2071 state
->format
->swap_cb_cr
? ADV7842_OP_SWAP_CB_CR
: 0);
2072 set_rgb_quantization_range(sd
);
2075 static int adv7842_get_format(struct v4l2_subdev
*sd
,
2076 struct v4l2_subdev_pad_config
*cfg
,
2077 struct v4l2_subdev_format
*format
)
2079 struct adv7842_state
*state
= to_state(sd
);
2081 if (format
->pad
!= ADV7842_PAD_SOURCE
)
2084 if (state
->mode
== ADV7842_MODE_SDP
) {
2086 if (!(sdp_read(sd
, 0x5a) & 0x01))
2088 format
->format
.code
= MEDIA_BUS_FMT_YUYV8_2X8
;
2089 format
->format
.width
= 720;
2091 if (state
->norm
& V4L2_STD_525_60
)
2092 format
->format
.height
= 480;
2094 format
->format
.height
= 576;
2095 format
->format
.colorspace
= V4L2_COLORSPACE_SMPTE170M
;
2099 adv7842_fill_format(state
, &format
->format
);
2101 if (format
->which
== V4L2_SUBDEV_FORMAT_TRY
) {
2102 struct v4l2_mbus_framefmt
*fmt
;
2104 fmt
= v4l2_subdev_get_try_format(sd
, cfg
, format
->pad
);
2105 format
->format
.code
= fmt
->code
;
2107 format
->format
.code
= state
->format
->code
;
2113 static int adv7842_set_format(struct v4l2_subdev
*sd
,
2114 struct v4l2_subdev_pad_config
*cfg
,
2115 struct v4l2_subdev_format
*format
)
2117 struct adv7842_state
*state
= to_state(sd
);
2118 const struct adv7842_format_info
*info
;
2120 if (format
->pad
!= ADV7842_PAD_SOURCE
)
2123 if (state
->mode
== ADV7842_MODE_SDP
)
2124 return adv7842_get_format(sd
, cfg
, format
);
2126 info
= adv7842_format_info(state
, format
->format
.code
);
2128 info
= adv7842_format_info(state
, MEDIA_BUS_FMT_YUYV8_2X8
);
2130 adv7842_fill_format(state
, &format
->format
);
2131 format
->format
.code
= info
->code
;
2133 if (format
->which
== V4L2_SUBDEV_FORMAT_TRY
) {
2134 struct v4l2_mbus_framefmt
*fmt
;
2136 fmt
= v4l2_subdev_get_try_format(sd
, cfg
, format
->pad
);
2137 fmt
->code
= format
->format
.code
;
2139 state
->format
= info
;
2140 adv7842_setup_format(state
);
2146 static void adv7842_irq_enable(struct v4l2_subdev
*sd
, bool enable
)
2149 /* Enable SSPD, STDI and CP locked/unlocked interrupts */
2150 io_write(sd
, 0x46, 0x9c);
2151 /* ESDP_50HZ_DET interrupt */
2152 io_write(sd
, 0x5a, 0x10);
2153 /* Enable CABLE_DET_A/B_ST (+5v) interrupt */
2154 io_write(sd
, 0x73, 0x03);
2155 /* Enable V_LOCKED and DE_REGEN_LCK interrupts */
2156 io_write(sd
, 0x78, 0x03);
2157 /* Enable SDP Standard Detection Change and SDP Video Detected */
2158 io_write(sd
, 0xa0, 0x09);
2159 /* Enable HDMI_MODE interrupt */
2160 io_write(sd
, 0x69, 0x08);
2162 io_write(sd
, 0x46, 0x0);
2163 io_write(sd
, 0x5a, 0x0);
2164 io_write(sd
, 0x73, 0x0);
2165 io_write(sd
, 0x78, 0x0);
2166 io_write(sd
, 0xa0, 0x0);
2167 io_write(sd
, 0x69, 0x0);
2171 #if IS_ENABLED(CONFIG_VIDEO_ADV7842_CEC)
2172 static void adv7842_cec_tx_raw_status(struct v4l2_subdev
*sd
, u8 tx_raw_status
)
2174 struct adv7842_state
*state
= to_state(sd
);
2176 if ((cec_read(sd
, 0x11) & 0x01) == 0) {
2177 v4l2_dbg(1, debug
, sd
, "%s: tx raw: tx disabled\n", __func__
);
2181 if (tx_raw_status
& 0x02) {
2182 v4l2_dbg(1, debug
, sd
, "%s: tx raw: arbitration lost\n",
2184 cec_transmit_done(state
->cec_adap
, CEC_TX_STATUS_ARB_LOST
,
2188 if (tx_raw_status
& 0x04) {
2193 v4l2_dbg(1, debug
, sd
, "%s: tx raw: retry failed\n", __func__
);
2195 * We set this status bit since this hardware performs
2198 status
= CEC_TX_STATUS_MAX_RETRIES
;
2199 nack_cnt
= cec_read(sd
, 0x14) & 0xf;
2201 status
|= CEC_TX_STATUS_NACK
;
2202 low_drive_cnt
= cec_read(sd
, 0x14) >> 4;
2204 status
|= CEC_TX_STATUS_LOW_DRIVE
;
2205 cec_transmit_done(state
->cec_adap
, status
,
2206 0, nack_cnt
, low_drive_cnt
, 0);
2209 if (tx_raw_status
& 0x01) {
2210 v4l2_dbg(1, debug
, sd
, "%s: tx raw: ready ok\n", __func__
);
2211 cec_transmit_done(state
->cec_adap
, CEC_TX_STATUS_OK
, 0, 0, 0, 0);
2216 static void adv7842_cec_isr(struct v4l2_subdev
*sd
, bool *handled
)
2220 /* cec controller */
2221 cec_irq
= io_read(sd
, 0x93) & 0x0f;
2225 v4l2_dbg(1, debug
, sd
, "%s: cec: irq 0x%x\n", __func__
, cec_irq
);
2226 adv7842_cec_tx_raw_status(sd
, cec_irq
);
2227 if (cec_irq
& 0x08) {
2228 struct adv7842_state
*state
= to_state(sd
);
2231 msg
.len
= cec_read(sd
, 0x25) & 0x1f;
2238 for (i
= 0; i
< msg
.len
; i
++)
2239 msg
.msg
[i
] = cec_read(sd
, i
+ 0x15);
2240 cec_write(sd
, 0x26, 0x01); /* re-enable rx */
2241 cec_received_msg(state
->cec_adap
, &msg
);
2245 io_write(sd
, 0x94, cec_irq
);
2251 static int adv7842_cec_adap_enable(struct cec_adapter
*adap
, bool enable
)
2253 struct adv7842_state
*state
= cec_get_drvdata(adap
);
2254 struct v4l2_subdev
*sd
= &state
->sd
;
2256 if (!state
->cec_enabled_adap
&& enable
) {
2257 cec_write_clr_set(sd
, 0x2a, 0x01, 0x01); /* power up cec */
2258 cec_write(sd
, 0x2c, 0x01); /* cec soft reset */
2259 cec_write_clr_set(sd
, 0x11, 0x01, 0); /* initially disable tx */
2262 /* tx: arbitration lost */
2263 /* tx: retry timeout */
2265 io_write_clr_set(sd
, 0x96, 0x0f, 0x0f);
2266 cec_write(sd
, 0x26, 0x01); /* enable rx */
2267 } else if (state
->cec_enabled_adap
&& !enable
) {
2268 /* disable cec interrupts */
2269 io_write_clr_set(sd
, 0x96, 0x0f, 0x00);
2270 /* disable address mask 1-3 */
2271 cec_write_clr_set(sd
, 0x27, 0x70, 0x00);
2272 /* power down cec section */
2273 cec_write_clr_set(sd
, 0x2a, 0x01, 0x00);
2274 state
->cec_valid_addrs
= 0;
2276 state
->cec_enabled_adap
= enable
;
2280 static int adv7842_cec_adap_log_addr(struct cec_adapter
*adap
, u8 addr
)
2282 struct adv7842_state
*state
= cec_get_drvdata(adap
);
2283 struct v4l2_subdev
*sd
= &state
->sd
;
2284 unsigned int i
, free_idx
= ADV7842_MAX_ADDRS
;
2286 if (!state
->cec_enabled_adap
)
2287 return addr
== CEC_LOG_ADDR_INVALID
? 0 : -EIO
;
2289 if (addr
== CEC_LOG_ADDR_INVALID
) {
2290 cec_write_clr_set(sd
, 0x27, 0x70, 0);
2291 state
->cec_valid_addrs
= 0;
2295 for (i
= 0; i
< ADV7842_MAX_ADDRS
; i
++) {
2296 bool is_valid
= state
->cec_valid_addrs
& (1 << i
);
2298 if (free_idx
== ADV7842_MAX_ADDRS
&& !is_valid
)
2300 if (is_valid
&& state
->cec_addr
[i
] == addr
)
2303 if (i
== ADV7842_MAX_ADDRS
) {
2305 if (i
== ADV7842_MAX_ADDRS
)
2308 state
->cec_addr
[i
] = addr
;
2309 state
->cec_valid_addrs
|= 1 << i
;
2313 /* enable address mask 0 */
2314 cec_write_clr_set(sd
, 0x27, 0x10, 0x10);
2315 /* set address for mask 0 */
2316 cec_write_clr_set(sd
, 0x28, 0x0f, addr
);
2319 /* enable address mask 1 */
2320 cec_write_clr_set(sd
, 0x27, 0x20, 0x20);
2321 /* set address for mask 1 */
2322 cec_write_clr_set(sd
, 0x28, 0xf0, addr
<< 4);
2325 /* enable address mask 2 */
2326 cec_write_clr_set(sd
, 0x27, 0x40, 0x40);
2327 /* set address for mask 1 */
2328 cec_write_clr_set(sd
, 0x29, 0x0f, addr
);
2334 static int adv7842_cec_adap_transmit(struct cec_adapter
*adap
, u8 attempts
,
2335 u32 signal_free_time
, struct cec_msg
*msg
)
2337 struct adv7842_state
*state
= cec_get_drvdata(adap
);
2338 struct v4l2_subdev
*sd
= &state
->sd
;
2343 * The number of retries is the number of attempts - 1, but retry
2344 * at least once. It's not clear if a value of 0 is allowed, so
2345 * let's do at least one retry.
2347 cec_write_clr_set(sd
, 0x12, 0x70, max(1, attempts
- 1) << 4);
2350 v4l2_err(sd
, "%s: len exceeded 16 (%d)\n", __func__
, len
);
2355 for (i
= 0; i
< len
; i
++)
2356 cec_write(sd
, i
, msg
->msg
[i
]);
2358 /* set length (data + header) */
2359 cec_write(sd
, 0x10, len
);
2360 /* start transmit, enable tx */
2361 cec_write(sd
, 0x11, 0x01);
2365 static const struct cec_adap_ops adv7842_cec_adap_ops
= {
2366 .adap_enable
= adv7842_cec_adap_enable
,
2367 .adap_log_addr
= adv7842_cec_adap_log_addr
,
2368 .adap_transmit
= adv7842_cec_adap_transmit
,
2372 static int adv7842_isr(struct v4l2_subdev
*sd
, u32 status
, bool *handled
)
2374 struct adv7842_state
*state
= to_state(sd
);
2375 u8 fmt_change_cp
, fmt_change_digital
, fmt_change_sdp
;
2378 adv7842_irq_enable(sd
, false);
2381 irq_status
[0] = io_read(sd
, 0x43);
2382 irq_status
[1] = io_read(sd
, 0x57);
2383 irq_status
[2] = io_read(sd
, 0x70);
2384 irq_status
[3] = io_read(sd
, 0x75);
2385 irq_status
[4] = io_read(sd
, 0x9d);
2386 irq_status
[5] = io_read(sd
, 0x66);
2390 io_write(sd
, 0x44, irq_status
[0]);
2392 io_write(sd
, 0x58, irq_status
[1]);
2394 io_write(sd
, 0x71, irq_status
[2]);
2396 io_write(sd
, 0x76, irq_status
[3]);
2398 io_write(sd
, 0x9e, irq_status
[4]);
2400 io_write(sd
, 0x67, irq_status
[5]);
2402 adv7842_irq_enable(sd
, true);
2404 v4l2_dbg(1, debug
, sd
, "%s: irq %x, %x, %x, %x, %x, %x\n", __func__
,
2405 irq_status
[0], irq_status
[1], irq_status
[2],
2406 irq_status
[3], irq_status
[4], irq_status
[5]);
2408 /* format change CP */
2409 fmt_change_cp
= irq_status
[0] & 0x9c;
2411 /* format change SDP */
2412 if (state
->mode
== ADV7842_MODE_SDP
)
2413 fmt_change_sdp
= (irq_status
[1] & 0x30) | (irq_status
[4] & 0x09);
2417 /* digital format CP */
2418 if (is_digital_input(sd
))
2419 fmt_change_digital
= irq_status
[3] & 0x03;
2421 fmt_change_digital
= 0;
2424 if (fmt_change_cp
|| fmt_change_digital
|| fmt_change_sdp
) {
2425 v4l2_dbg(1, debug
, sd
,
2426 "%s: fmt_change_cp = 0x%x, fmt_change_digital = 0x%x, fmt_change_sdp = 0x%x\n",
2427 __func__
, fmt_change_cp
, fmt_change_digital
,
2429 v4l2_subdev_notify_event(sd
, &adv7842_ev_fmt
);
2435 if (irq_status
[5] & 0x08) {
2436 v4l2_dbg(1, debug
, sd
, "%s: irq %s mode\n", __func__
,
2437 (io_read(sd
, 0x65) & 0x08) ? "HDMI" : "DVI");
2438 set_rgb_quantization_range(sd
);
2443 #if IS_ENABLED(CONFIG_VIDEO_ADV7842_CEC)
2445 adv7842_cec_isr(sd
, handled
);
2449 if (irq_status
[2] & 0x3) {
2450 v4l2_dbg(1, debug
, sd
, "%s: irq tx_5v\n", __func__
);
2451 adv7842_s_detect_tx_5v_ctrl(sd
);
2458 static int adv7842_get_edid(struct v4l2_subdev
*sd
, struct v4l2_edid
*edid
)
2460 struct adv7842_state
*state
= to_state(sd
);
2463 memset(edid
->reserved
, 0, sizeof(edid
->reserved
));
2465 switch (edid
->pad
) {
2466 case ADV7842_EDID_PORT_A
:
2467 case ADV7842_EDID_PORT_B
:
2468 if (state
->hdmi_edid
.present
& (0x04 << edid
->pad
))
2469 data
= state
->hdmi_edid
.edid
;
2471 case ADV7842_EDID_PORT_VGA
:
2472 if (state
->vga_edid
.present
)
2473 data
= state
->vga_edid
.edid
;
2479 if (edid
->start_block
== 0 && edid
->blocks
== 0) {
2480 edid
->blocks
= data
? 2 : 0;
2487 if (edid
->start_block
>= 2)
2490 if (edid
->start_block
+ edid
->blocks
> 2)
2491 edid
->blocks
= 2 - edid
->start_block
;
2493 memcpy(edid
->edid
, data
+ edid
->start_block
* 128, edid
->blocks
* 128);
2498 static int adv7842_set_edid(struct v4l2_subdev
*sd
, struct v4l2_edid
*e
)
2500 struct adv7842_state
*state
= to_state(sd
);
2503 memset(e
->reserved
, 0, sizeof(e
->reserved
));
2505 if (e
->pad
> ADV7842_EDID_PORT_VGA
)
2507 if (e
->start_block
!= 0)
2509 if (e
->blocks
> 2) {
2514 /* todo, per edid */
2515 state
->aspect_ratio
= v4l2_calc_aspect_ratio(e
->edid
[0x15],
2519 case ADV7842_EDID_PORT_VGA
:
2520 memset(&state
->vga_edid
.edid
, 0, 256);
2521 state
->vga_edid
.present
= e
->blocks
? 0x1 : 0x0;
2522 memcpy(&state
->vga_edid
.edid
, e
->edid
, 128 * e
->blocks
);
2523 err
= edid_write_vga_segment(sd
);
2525 case ADV7842_EDID_PORT_A
:
2526 case ADV7842_EDID_PORT_B
:
2527 memset(&state
->hdmi_edid
.edid
, 0, 256);
2529 state
->hdmi_edid
.present
|= 0x04 << e
->pad
;
2531 state
->hdmi_edid
.present
&= ~(0x04 << e
->pad
);
2532 adv7842_s_detect_tx_5v_ctrl(sd
);
2534 memcpy(&state
->hdmi_edid
.edid
, e
->edid
, 128 * e
->blocks
);
2535 err
= edid_write_hdmi_segment(sd
, e
->pad
);
2541 v4l2_err(sd
, "error %d writing edid on port %d\n", err
, e
->pad
);
2545 struct adv7842_cfg_read_infoframe
{
2552 static void log_infoframe(struct v4l2_subdev
*sd
, struct adv7842_cfg_read_infoframe
*cri
)
2556 union hdmi_infoframe frame
;
2558 struct i2c_client
*client
= v4l2_get_subdevdata(sd
);
2559 struct device
*dev
= &client
->dev
;
2561 if (!(io_read(sd
, 0x60) & cri
->present_mask
)) {
2562 v4l2_info(sd
, "%s infoframe not received\n", cri
->desc
);
2566 for (i
= 0; i
< 3; i
++)
2567 buffer
[i
] = infoframe_read(sd
, cri
->head_addr
+ i
);
2569 len
= buffer
[2] + 1;
2571 if (len
+ 3 > sizeof(buffer
)) {
2572 v4l2_err(sd
, "%s: invalid %s infoframe length %d\n", __func__
, cri
->desc
, len
);
2576 for (i
= 0; i
< len
; i
++)
2577 buffer
[i
+ 3] = infoframe_read(sd
, cri
->payload_addr
+ i
);
2579 if (hdmi_infoframe_unpack(&frame
, buffer
) < 0) {
2580 v4l2_err(sd
, "%s: unpack of %s infoframe failed\n", __func__
, cri
->desc
);
2584 hdmi_infoframe_log(KERN_INFO
, dev
, &frame
);
2587 static void adv7842_log_infoframes(struct v4l2_subdev
*sd
)
2590 struct adv7842_cfg_read_infoframe cri
[] = {
2591 { "AVI", 0x01, 0xe0, 0x00 },
2592 { "Audio", 0x02, 0xe3, 0x1c },
2593 { "SDP", 0x04, 0xe6, 0x2a },
2594 { "Vendor", 0x10, 0xec, 0x54 }
2597 if (!(hdmi_read(sd
, 0x05) & 0x80)) {
2598 v4l2_info(sd
, "receive DVI-D signal, no infoframes\n");
2602 for (i
= 0; i
< ARRAY_SIZE(cri
); i
++)
2603 log_infoframe(sd
, &cri
[i
]);
2607 /* Let's keep it here for now, as it could be useful for debug */
2608 static const char * const prim_mode_txt
[] = {
2613 "CVBS & HDMI AUDIO",
2628 static int adv7842_sdp_log_status(struct v4l2_subdev
*sd
)
2630 /* SDP (Standard definition processor) block */
2631 u8 sdp_signal_detected
= sdp_read(sd
, 0x5A) & 0x01;
2633 v4l2_info(sd
, "Chip powered %s\n", no_power(sd
) ? "off" : "on");
2634 v4l2_info(sd
, "Prim-mode = 0x%x, video std = 0x%x\n",
2635 io_read(sd
, 0x01) & 0x0f, io_read(sd
, 0x00) & 0x3f);
2637 v4l2_info(sd
, "SDP: free run: %s\n",
2638 (sdp_read(sd
, 0x56) & 0x01) ? "on" : "off");
2639 v4l2_info(sd
, "SDP: %s\n", sdp_signal_detected
?
2640 "valid SD/PR signal detected" : "invalid/no signal");
2641 if (sdp_signal_detected
) {
2642 static const char * const sdp_std_txt
[] = {
2650 "7?", "8?", "9?", "a?", "b?",
2656 v4l2_info(sd
, "SDP: standard %s\n",
2657 sdp_std_txt
[sdp_read(sd
, 0x52) & 0x0f]);
2658 v4l2_info(sd
, "SDP: %s\n",
2659 (sdp_read(sd
, 0x59) & 0x08) ? "50Hz" : "60Hz");
2660 v4l2_info(sd
, "SDP: %s\n",
2661 (sdp_read(sd
, 0x57) & 0x08) ? "Interlaced" : "Progressive");
2662 v4l2_info(sd
, "SDP: deinterlacer %s\n",
2663 (sdp_read(sd
, 0x12) & 0x08) ? "enabled" : "disabled");
2664 v4l2_info(sd
, "SDP: csc %s mode\n",
2665 (sdp_io_read(sd
, 0xe0) & 0x40) ? "auto" : "manual");
2670 static int adv7842_cp_log_status(struct v4l2_subdev
*sd
)
2673 struct adv7842_state
*state
= to_state(sd
);
2674 struct v4l2_dv_timings timings
;
2675 u8 reg_io_0x02
= io_read(sd
, 0x02);
2676 u8 reg_io_0x21
= io_read(sd
, 0x21);
2677 u8 reg_rep_0x77
= rep_read(sd
, 0x77);
2678 u8 reg_rep_0x7d
= rep_read(sd
, 0x7d);
2679 bool audio_pll_locked
= hdmi_read(sd
, 0x04) & 0x01;
2680 bool audio_sample_packet_detect
= hdmi_read(sd
, 0x18) & 0x01;
2681 bool audio_mute
= io_read(sd
, 0x65) & 0x40;
2683 static const char * const csc_coeff_sel_rb
[16] = {
2684 "bypassed", "YPbPr601 -> RGB", "reserved", "YPbPr709 -> RGB",
2685 "reserved", "RGB -> YPbPr601", "reserved", "RGB -> YPbPr709",
2686 "reserved", "YPbPr709 -> YPbPr601", "YPbPr601 -> YPbPr709",
2687 "reserved", "reserved", "reserved", "reserved", "manual"
2689 static const char * const input_color_space_txt
[16] = {
2690 "RGB limited range (16-235)", "RGB full range (0-255)",
2691 "YCbCr Bt.601 (16-235)", "YCbCr Bt.709 (16-235)",
2692 "xvYCC Bt.601", "xvYCC Bt.709",
2693 "YCbCr Bt.601 (0-255)", "YCbCr Bt.709 (0-255)",
2694 "invalid", "invalid", "invalid", "invalid", "invalid",
2695 "invalid", "invalid", "automatic"
2697 static const char * const rgb_quantization_range_txt
[] = {
2699 "RGB limited range (16-235)",
2700 "RGB full range (0-255)",
2702 static const char * const deep_color_mode_txt
[4] = {
2703 "8-bits per channel",
2704 "10-bits per channel",
2705 "12-bits per channel",
2706 "16-bits per channel (not supported)"
2709 v4l2_info(sd
, "-----Chip status-----\n");
2710 v4l2_info(sd
, "Chip power: %s\n", no_power(sd
) ? "off" : "on");
2711 v4l2_info(sd
, "HDMI/DVI-D port selected: %s\n",
2712 state
->hdmi_port_a
? "A" : "B");
2713 v4l2_info(sd
, "EDID A %s, B %s\n",
2714 ((reg_rep_0x7d
& 0x04) && (reg_rep_0x77
& 0x04)) ?
2715 "enabled" : "disabled",
2716 ((reg_rep_0x7d
& 0x08) && (reg_rep_0x77
& 0x08)) ?
2717 "enabled" : "disabled");
2718 v4l2_info(sd
, "HPD A %s, B %s\n",
2719 reg_io_0x21
& 0x02 ? "enabled" : "disabled",
2720 reg_io_0x21
& 0x01 ? "enabled" : "disabled");
2721 v4l2_info(sd
, "CEC: %s\n", state
->cec_enabled_adap
?
2722 "enabled" : "disabled");
2723 if (state
->cec_enabled_adap
) {
2726 for (i
= 0; i
< ADV7842_MAX_ADDRS
; i
++) {
2727 bool is_valid
= state
->cec_valid_addrs
& (1 << i
);
2730 v4l2_info(sd
, "CEC Logical Address: 0x%x\n",
2731 state
->cec_addr
[i
]);
2735 v4l2_info(sd
, "-----Signal status-----\n");
2736 if (state
->hdmi_port_a
) {
2737 v4l2_info(sd
, "Cable detected (+5V power): %s\n",
2738 io_read(sd
, 0x6f) & 0x02 ? "true" : "false");
2739 v4l2_info(sd
, "TMDS signal detected: %s\n",
2740 (io_read(sd
, 0x6a) & 0x02) ? "true" : "false");
2741 v4l2_info(sd
, "TMDS signal locked: %s\n",
2742 (io_read(sd
, 0x6a) & 0x20) ? "true" : "false");
2744 v4l2_info(sd
, "Cable detected (+5V power):%s\n",
2745 io_read(sd
, 0x6f) & 0x01 ? "true" : "false");
2746 v4l2_info(sd
, "TMDS signal detected: %s\n",
2747 (io_read(sd
, 0x6a) & 0x01) ? "true" : "false");
2748 v4l2_info(sd
, "TMDS signal locked: %s\n",
2749 (io_read(sd
, 0x6a) & 0x10) ? "true" : "false");
2751 v4l2_info(sd
, "CP free run: %s\n",
2752 (!!(cp_read(sd
, 0xff) & 0x10) ? "on" : "off"));
2753 v4l2_info(sd
, "Prim-mode = 0x%x, video std = 0x%x, v_freq = 0x%x\n",
2754 io_read(sd
, 0x01) & 0x0f, io_read(sd
, 0x00) & 0x3f,
2755 (io_read(sd
, 0x01) & 0x70) >> 4);
2757 v4l2_info(sd
, "-----Video Timings-----\n");
2758 if (no_cp_signal(sd
)) {
2759 v4l2_info(sd
, "STDI: not locked\n");
2761 u32 bl
= ((cp_read(sd
, 0xb1) & 0x3f) << 8) | cp_read(sd
, 0xb2);
2762 u32 lcf
= ((cp_read(sd
, 0xb3) & 0x7) << 8) | cp_read(sd
, 0xb4);
2763 u32 lcvs
= cp_read(sd
, 0xb3) >> 3;
2764 u32 fcl
= ((cp_read(sd
, 0xb8) & 0x1f) << 8) | cp_read(sd
, 0xb9);
2765 char hs_pol
= ((cp_read(sd
, 0xb5) & 0x10) ?
2766 ((cp_read(sd
, 0xb5) & 0x08) ? '+' : '-') : 'x');
2767 char vs_pol
= ((cp_read(sd
, 0xb5) & 0x40) ?
2768 ((cp_read(sd
, 0xb5) & 0x20) ? '+' : '-') : 'x');
2770 "STDI: lcf (frame height - 1) = %d, bl = %d, lcvs (vsync) = %d, fcl = %d, %s, %chsync, %cvsync\n",
2772 (cp_read(sd
, 0xb1) & 0x40) ?
2773 "interlaced" : "progressive",
2776 if (adv7842_query_dv_timings(sd
, &timings
))
2777 v4l2_info(sd
, "No video detected\n");
2779 v4l2_print_dv_timings(sd
->name
, "Detected format: ",
2781 v4l2_print_dv_timings(sd
->name
, "Configured format: ",
2782 &state
->timings
, true);
2784 if (no_cp_signal(sd
))
2787 v4l2_info(sd
, "-----Color space-----\n");
2788 v4l2_info(sd
, "RGB quantization range ctrl: %s\n",
2789 rgb_quantization_range_txt
[state
->rgb_quantization_range
]);
2790 v4l2_info(sd
, "Input color space: %s\n",
2791 input_color_space_txt
[reg_io_0x02
>> 4]);
2792 v4l2_info(sd
, "Output color space: %s %s, alt-gamma %s\n",
2793 (reg_io_0x02
& 0x02) ? "RGB" : "YCbCr",
2794 (((reg_io_0x02
>> 2) & 0x01) ^ (reg_io_0x02
& 0x01)) ?
2795 "(16-235)" : "(0-255)",
2796 (reg_io_0x02
& 0x08) ? "enabled" : "disabled");
2797 v4l2_info(sd
, "Color space conversion: %s\n",
2798 csc_coeff_sel_rb
[cp_read(sd
, 0xf4) >> 4]);
2800 if (!is_digital_input(sd
))
2803 v4l2_info(sd
, "-----%s status-----\n", is_hdmi(sd
) ? "HDMI" : "DVI-D");
2804 v4l2_info(sd
, "HDCP encrypted content: %s\n",
2805 (hdmi_read(sd
, 0x05) & 0x40) ? "true" : "false");
2806 v4l2_info(sd
, "HDCP keys read: %s%s\n",
2807 (hdmi_read(sd
, 0x04) & 0x20) ? "yes" : "no",
2808 (hdmi_read(sd
, 0x04) & 0x10) ? "ERROR" : "");
2812 v4l2_info(sd
, "Audio: pll %s, samples %s, %s\n",
2813 audio_pll_locked
? "locked" : "not locked",
2814 audio_sample_packet_detect
? "detected" : "not detected",
2815 audio_mute
? "muted" : "enabled");
2816 if (audio_pll_locked
&& audio_sample_packet_detect
) {
2817 v4l2_info(sd
, "Audio format: %s\n",
2818 (hdmi_read(sd
, 0x07) & 0x40) ? "multi-channel" : "stereo");
2820 v4l2_info(sd
, "Audio CTS: %u\n", (hdmi_read(sd
, 0x5b) << 12) +
2821 (hdmi_read(sd
, 0x5c) << 8) +
2822 (hdmi_read(sd
, 0x5d) & 0xf0));
2823 v4l2_info(sd
, "Audio N: %u\n", ((hdmi_read(sd
, 0x5d) & 0x0f) << 16) +
2824 (hdmi_read(sd
, 0x5e) << 8) +
2825 hdmi_read(sd
, 0x5f));
2826 v4l2_info(sd
, "AV Mute: %s\n",
2827 (hdmi_read(sd
, 0x04) & 0x40) ? "on" : "off");
2828 v4l2_info(sd
, "Deep color mode: %s\n",
2829 deep_color_mode_txt
[hdmi_read(sd
, 0x0b) >> 6]);
2831 adv7842_log_infoframes(sd
);
2836 static int adv7842_log_status(struct v4l2_subdev
*sd
)
2838 struct adv7842_state
*state
= to_state(sd
);
2840 if (state
->mode
== ADV7842_MODE_SDP
)
2841 return adv7842_sdp_log_status(sd
);
2842 return adv7842_cp_log_status(sd
);
2845 static int adv7842_querystd(struct v4l2_subdev
*sd
, v4l2_std_id
*std
)
2847 struct adv7842_state
*state
= to_state(sd
);
2849 v4l2_dbg(1, debug
, sd
, "%s:\n", __func__
);
2851 if (state
->mode
!= ADV7842_MODE_SDP
)
2854 if (!(sdp_read(sd
, 0x5A) & 0x01)) {
2856 v4l2_dbg(1, debug
, sd
, "%s: no valid signal\n", __func__
);
2860 switch (sdp_read(sd
, 0x52) & 0x0f) {
2863 *std
&= V4L2_STD_NTSC
;
2867 *std
&= V4L2_STD_NTSC_443
;
2871 *std
&= V4L2_STD_SECAM
;
2875 *std
&= V4L2_STD_PAL_M
;
2879 *std
&= V4L2_STD_PAL_60
;
2883 *std
&= V4L2_STD_PAL_Nc
;
2887 *std
&= V4L2_STD_PAL
;
2891 *std
&= V4L2_STD_SECAM
;
2894 *std
&= V4L2_STD_ALL
;
2900 static void adv7842_s_sdp_io(struct v4l2_subdev
*sd
, struct adv7842_sdp_io_sync_adjustment
*s
)
2902 if (s
&& s
->adjust
) {
2903 sdp_io_write(sd
, 0x94, (s
->hs_beg
>> 8) & 0xf);
2904 sdp_io_write(sd
, 0x95, s
->hs_beg
& 0xff);
2905 sdp_io_write(sd
, 0x96, (s
->hs_width
>> 8) & 0xf);
2906 sdp_io_write(sd
, 0x97, s
->hs_width
& 0xff);
2907 sdp_io_write(sd
, 0x98, (s
->de_beg
>> 8) & 0xf);
2908 sdp_io_write(sd
, 0x99, s
->de_beg
& 0xff);
2909 sdp_io_write(sd
, 0x9a, (s
->de_end
>> 8) & 0xf);
2910 sdp_io_write(sd
, 0x9b, s
->de_end
& 0xff);
2911 sdp_io_write(sd
, 0xa8, s
->vs_beg_o
);
2912 sdp_io_write(sd
, 0xa9, s
->vs_beg_e
);
2913 sdp_io_write(sd
, 0xaa, s
->vs_end_o
);
2914 sdp_io_write(sd
, 0xab, s
->vs_end_e
);
2915 sdp_io_write(sd
, 0xac, s
->de_v_beg_o
);
2916 sdp_io_write(sd
, 0xad, s
->de_v_beg_e
);
2917 sdp_io_write(sd
, 0xae, s
->de_v_end_o
);
2918 sdp_io_write(sd
, 0xaf, s
->de_v_end_e
);
2920 /* set to default */
2921 sdp_io_write(sd
, 0x94, 0x00);
2922 sdp_io_write(sd
, 0x95, 0x00);
2923 sdp_io_write(sd
, 0x96, 0x00);
2924 sdp_io_write(sd
, 0x97, 0x20);
2925 sdp_io_write(sd
, 0x98, 0x00);
2926 sdp_io_write(sd
, 0x99, 0x00);
2927 sdp_io_write(sd
, 0x9a, 0x00);
2928 sdp_io_write(sd
, 0x9b, 0x00);
2929 sdp_io_write(sd
, 0xa8, 0x04);
2930 sdp_io_write(sd
, 0xa9, 0x04);
2931 sdp_io_write(sd
, 0xaa, 0x04);
2932 sdp_io_write(sd
, 0xab, 0x04);
2933 sdp_io_write(sd
, 0xac, 0x04);
2934 sdp_io_write(sd
, 0xad, 0x04);
2935 sdp_io_write(sd
, 0xae, 0x04);
2936 sdp_io_write(sd
, 0xaf, 0x04);
2940 static int adv7842_s_std(struct v4l2_subdev
*sd
, v4l2_std_id norm
)
2942 struct adv7842_state
*state
= to_state(sd
);
2943 struct adv7842_platform_data
*pdata
= &state
->pdata
;
2945 v4l2_dbg(1, debug
, sd
, "%s:\n", __func__
);
2947 if (state
->mode
!= ADV7842_MODE_SDP
)
2950 if (norm
& V4L2_STD_625_50
)
2951 adv7842_s_sdp_io(sd
, &pdata
->sdp_io_sync_625
);
2952 else if (norm
& V4L2_STD_525_60
)
2953 adv7842_s_sdp_io(sd
, &pdata
->sdp_io_sync_525
);
2955 adv7842_s_sdp_io(sd
, NULL
);
2957 if (norm
& V4L2_STD_ALL
) {
2964 static int adv7842_g_std(struct v4l2_subdev
*sd
, v4l2_std_id
*norm
)
2966 struct adv7842_state
*state
= to_state(sd
);
2968 v4l2_dbg(1, debug
, sd
, "%s:\n", __func__
);
2970 if (state
->mode
!= ADV7842_MODE_SDP
)
2973 *norm
= state
->norm
;
2977 /* ----------------------------------------------------------------------- */
2979 static int adv7842_core_init(struct v4l2_subdev
*sd
)
2981 struct adv7842_state
*state
= to_state(sd
);
2982 struct adv7842_platform_data
*pdata
= &state
->pdata
;
2983 hdmi_write(sd
, 0x48,
2984 (pdata
->disable_pwrdnb
? 0x80 : 0) |
2985 (pdata
->disable_cable_det_rst
? 0x40 : 0));
2990 * Disable I2C access to internal EDID ram from HDMI DDC ports
2991 * Disable auto edid enable when leaving powerdown mode
2993 rep_write_and_or(sd
, 0x77, 0xd3, 0x20);
2996 io_write(sd
, 0x0c, 0x42); /* Power up part and power down VDP */
2997 io_write(sd
, 0x15, 0x80); /* Power up pads */
3000 io_write(sd
, 0x02, 0xf0 | pdata
->alt_gamma
<< 3);
3001 io_write_and_or(sd
, 0x05, 0xf0, pdata
->blank_data
<< 3 |
3002 pdata
->insert_av_codes
<< 2 |
3003 pdata
->replicate_av_codes
<< 1);
3004 adv7842_setup_format(state
);
3007 hdmi_write_and_or(sd
, 0x1a, 0xf1, 0x08); /* Wait 1 s before unmute */
3009 /* Drive strength */
3010 io_write_and_or(sd
, 0x14, 0xc0,
3011 pdata
->dr_str_data
<< 4 |
3012 pdata
->dr_str_clk
<< 2 |
3013 pdata
->dr_str_sync
);
3016 cp_write_and_or(sd
, 0xba, 0xfc, pdata
->hdmi_free_run_enable
|
3017 (pdata
->hdmi_free_run_mode
<< 1));
3020 sdp_write_and_or(sd
, 0xdd, 0xf0, pdata
->sdp_free_run_force
|
3021 (pdata
->sdp_free_run_cbar_en
<< 1) |
3022 (pdata
->sdp_free_run_man_col_en
<< 2) |
3023 (pdata
->sdp_free_run_auto
<< 3));
3025 /* TODO from platform data */
3026 cp_write(sd
, 0x69, 0x14); /* Enable CP CSC */
3027 io_write(sd
, 0x06, 0xa6); /* positive VS and HS and DE */
3028 cp_write(sd
, 0xf3, 0xdc); /* Low threshold to enter/exit free run mode */
3029 afe_write(sd
, 0xb5, 0x01); /* Setting MCLK to 256Fs */
3031 afe_write(sd
, 0x02, pdata
->ain_sel
); /* Select analog input muxing mode */
3032 io_write_and_or(sd
, 0x30, ~(1 << 4), pdata
->output_bus_lsb_to_msb
<< 4);
3034 sdp_csc_coeff(sd
, &pdata
->sdp_csc_coeff
);
3036 /* todo, improve settings for sdram */
3037 if (pdata
->sd_ram_size
>= 128) {
3038 sdp_write(sd
, 0x12, 0x0d); /* Frame TBC,3D comb enabled */
3039 if (pdata
->sd_ram_ddr
) {
3040 /* SDP setup for the AD eval board */
3041 sdp_io_write(sd
, 0x6f, 0x00); /* DDR mode */
3042 sdp_io_write(sd
, 0x75, 0x0a); /* 128 MB memory size */
3043 sdp_io_write(sd
, 0x7a, 0xa5); /* Timing Adjustment */
3044 sdp_io_write(sd
, 0x7b, 0x8f); /* Timing Adjustment */
3045 sdp_io_write(sd
, 0x60, 0x01); /* SDRAM reset */
3047 sdp_io_write(sd
, 0x75, 0x0a); /* 64 MB memory size ?*/
3048 sdp_io_write(sd
, 0x74, 0x00); /* must be zero for sdr sdram */
3049 sdp_io_write(sd
, 0x79, 0x33); /* CAS latency to 3,
3050 depends on memory */
3051 sdp_io_write(sd
, 0x6f, 0x01); /* SDR mode */
3052 sdp_io_write(sd
, 0x7a, 0xa5); /* Timing Adjustment */
3053 sdp_io_write(sd
, 0x7b, 0x8f); /* Timing Adjustment */
3054 sdp_io_write(sd
, 0x60, 0x01); /* SDRAM reset */
3058 * Manual UG-214, rev 0 is bit confusing on this bit
3059 * but a '1' disables any signal if the Ram is active.
3061 sdp_io_write(sd
, 0x29, 0x10); /* Tristate memory interface */
3064 select_input(sd
, pdata
->vid_std_select
);
3068 if (pdata
->hpa_auto
) {
3069 /* HPA auto, HPA 0.5s after Edid set and Cable detect */
3070 hdmi_write(sd
, 0x69, 0x5c);
3073 hdmi_write(sd
, 0x69, 0xa3);
3074 /* HPA disable on port A and B */
3075 io_write_and_or(sd
, 0x20, 0xcf, 0x00);
3079 io_write(sd
, 0x19, 0x80 | pdata
->llc_dll_phase
);
3080 io_write(sd
, 0x33, 0x40);
3083 io_write(sd
, 0x40, 0xf2); /* Configure INT1 */
3085 adv7842_irq_enable(sd
, true);
3087 return v4l2_ctrl_handler_setup(sd
->ctrl_handler
);
3090 /* ----------------------------------------------------------------------- */
3092 static int adv7842_ddr_ram_test(struct v4l2_subdev
*sd
)
3095 * From ADV784x external Memory test.pdf
3097 * Reset must just been performed before running test.
3098 * Recommended to reset after test.
3105 io_write(sd
, 0x00, 0x01); /* Program SDP 4x1 */
3106 io_write(sd
, 0x01, 0x00); /* Program SDP mode */
3107 afe_write(sd
, 0x80, 0x92); /* SDP Recommeneded Write */
3108 afe_write(sd
, 0x9B, 0x01); /* SDP Recommeneded Write ADV7844ES1 */
3109 afe_write(sd
, 0x9C, 0x60); /* SDP Recommeneded Write ADV7844ES1 */
3110 afe_write(sd
, 0x9E, 0x02); /* SDP Recommeneded Write ADV7844ES1 */
3111 afe_write(sd
, 0xA0, 0x0B); /* SDP Recommeneded Write ADV7844ES1 */
3112 afe_write(sd
, 0xC3, 0x02); /* Memory BIST Initialisation */
3113 io_write(sd
, 0x0C, 0x40); /* Power up ADV7844 */
3114 io_write(sd
, 0x15, 0xBA); /* Enable outputs */
3115 sdp_write(sd
, 0x12, 0x00); /* Disable 3D comb, Frame TBC & 3DNR */
3116 io_write(sd
, 0xFF, 0x04); /* Reset memory controller */
3120 sdp_write(sd
, 0x12, 0x00); /* Disable 3D Comb, Frame TBC & 3DNR */
3121 sdp_io_write(sd
, 0x2A, 0x01); /* Memory BIST Initialisation */
3122 sdp_io_write(sd
, 0x7c, 0x19); /* Memory BIST Initialisation */
3123 sdp_io_write(sd
, 0x80, 0x87); /* Memory BIST Initialisation */
3124 sdp_io_write(sd
, 0x81, 0x4a); /* Memory BIST Initialisation */
3125 sdp_io_write(sd
, 0x82, 0x2c); /* Memory BIST Initialisation */
3126 sdp_io_write(sd
, 0x83, 0x0e); /* Memory BIST Initialisation */
3127 sdp_io_write(sd
, 0x84, 0x94); /* Memory BIST Initialisation */
3128 sdp_io_write(sd
, 0x85, 0x62); /* Memory BIST Initialisation */
3129 sdp_io_write(sd
, 0x7d, 0x00); /* Memory BIST Initialisation */
3130 sdp_io_write(sd
, 0x7e, 0x1a); /* Memory BIST Initialisation */
3134 sdp_io_write(sd
, 0xd9, 0xd5); /* Enable BIST Test */
3135 sdp_write(sd
, 0x12, 0x05); /* Enable FRAME TBC & 3D COMB */
3139 for (i
= 0; i
< 10; i
++) {
3140 u8 result
= sdp_io_read(sd
, 0xdb);
3141 if (result
& 0x10) {
3151 v4l2_dbg(1, debug
, sd
,
3152 "Ram Test: completed %d of %d: pass %d, fail %d\n",
3153 complete
, i
, pass
, fail
);
3155 if (!complete
|| fail
)
3160 static void adv7842_rewrite_i2c_addresses(struct v4l2_subdev
*sd
,
3161 struct adv7842_platform_data
*pdata
)
3163 io_write(sd
, 0xf1, pdata
->i2c_sdp
<< 1);
3164 io_write(sd
, 0xf2, pdata
->i2c_sdp_io
<< 1);
3165 io_write(sd
, 0xf3, pdata
->i2c_avlink
<< 1);
3166 io_write(sd
, 0xf4, pdata
->i2c_cec
<< 1);
3167 io_write(sd
, 0xf5, pdata
->i2c_infoframe
<< 1);
3169 io_write(sd
, 0xf8, pdata
->i2c_afe
<< 1);
3170 io_write(sd
, 0xf9, pdata
->i2c_repeater
<< 1);
3171 io_write(sd
, 0xfa, pdata
->i2c_edid
<< 1);
3172 io_write(sd
, 0xfb, pdata
->i2c_hdmi
<< 1);
3174 io_write(sd
, 0xfd, pdata
->i2c_cp
<< 1);
3175 io_write(sd
, 0xfe, pdata
->i2c_vdp
<< 1);
3178 static int adv7842_command_ram_test(struct v4l2_subdev
*sd
)
3180 struct i2c_client
*client
= v4l2_get_subdevdata(sd
);
3181 struct adv7842_state
*state
= to_state(sd
);
3182 struct adv7842_platform_data
*pdata
= client
->dev
.platform_data
;
3183 struct v4l2_dv_timings timings
;
3189 if (!pdata
->sd_ram_size
|| !pdata
->sd_ram_ddr
) {
3190 v4l2_info(sd
, "no sdram or no ddr sdram\n");
3196 adv7842_rewrite_i2c_addresses(sd
, pdata
);
3199 ret
= adv7842_ddr_ram_test(sd
);
3203 adv7842_rewrite_i2c_addresses(sd
, pdata
);
3205 /* and re-init chip and state */
3206 adv7842_core_init(sd
);
3210 select_input(sd
, state
->vid_std_select
);
3214 edid_write_vga_segment(sd
);
3215 edid_write_hdmi_segment(sd
, ADV7842_EDID_PORT_A
);
3216 edid_write_hdmi_segment(sd
, ADV7842_EDID_PORT_B
);
3218 timings
= state
->timings
;
3220 memset(&state
->timings
, 0, sizeof(struct v4l2_dv_timings
));
3222 adv7842_s_dv_timings(sd
, &timings
);
3227 static long adv7842_ioctl(struct v4l2_subdev
*sd
, unsigned int cmd
, void *arg
)
3230 case ADV7842_CMD_RAM_TEST
:
3231 return adv7842_command_ram_test(sd
);
3236 static int adv7842_subscribe_event(struct v4l2_subdev
*sd
,
3238 struct v4l2_event_subscription
*sub
)
3240 switch (sub
->type
) {
3241 case V4L2_EVENT_SOURCE_CHANGE
:
3242 return v4l2_src_change_event_subdev_subscribe(sd
, fh
, sub
);
3243 case V4L2_EVENT_CTRL
:
3244 return v4l2_ctrl_subdev_subscribe_event(sd
, fh
, sub
);
3250 static int adv7842_registered(struct v4l2_subdev
*sd
)
3252 struct adv7842_state
*state
= to_state(sd
);
3253 struct i2c_client
*client
= v4l2_get_subdevdata(sd
);
3256 err
= cec_register_adapter(state
->cec_adap
, &client
->dev
);
3258 cec_delete_adapter(state
->cec_adap
);
3262 static void adv7842_unregistered(struct v4l2_subdev
*sd
)
3264 struct adv7842_state
*state
= to_state(sd
);
3266 cec_unregister_adapter(state
->cec_adap
);
3269 /* ----------------------------------------------------------------------- */
3271 static const struct v4l2_ctrl_ops adv7842_ctrl_ops
= {
3272 .s_ctrl
= adv7842_s_ctrl
,
3273 .g_volatile_ctrl
= adv7842_g_volatile_ctrl
,
3276 static const struct v4l2_subdev_core_ops adv7842_core_ops
= {
3277 .log_status
= adv7842_log_status
,
3278 .ioctl
= adv7842_ioctl
,
3279 .interrupt_service_routine
= adv7842_isr
,
3280 .subscribe_event
= adv7842_subscribe_event
,
3281 .unsubscribe_event
= v4l2_event_subdev_unsubscribe
,
3282 #ifdef CONFIG_VIDEO_ADV_DEBUG
3283 .g_register
= adv7842_g_register
,
3284 .s_register
= adv7842_s_register
,
3288 static const struct v4l2_subdev_video_ops adv7842_video_ops
= {
3289 .g_std
= adv7842_g_std
,
3290 .s_std
= adv7842_s_std
,
3291 .s_routing
= adv7842_s_routing
,
3292 .querystd
= adv7842_querystd
,
3293 .g_input_status
= adv7842_g_input_status
,
3294 .s_dv_timings
= adv7842_s_dv_timings
,
3295 .g_dv_timings
= adv7842_g_dv_timings
,
3296 .query_dv_timings
= adv7842_query_dv_timings
,
3299 static const struct v4l2_subdev_pad_ops adv7842_pad_ops
= {
3300 .enum_mbus_code
= adv7842_enum_mbus_code
,
3301 .get_fmt
= adv7842_get_format
,
3302 .set_fmt
= adv7842_set_format
,
3303 .get_edid
= adv7842_get_edid
,
3304 .set_edid
= adv7842_set_edid
,
3305 .enum_dv_timings
= adv7842_enum_dv_timings
,
3306 .dv_timings_cap
= adv7842_dv_timings_cap
,
3309 static const struct v4l2_subdev_ops adv7842_ops
= {
3310 .core
= &adv7842_core_ops
,
3311 .video
= &adv7842_video_ops
,
3312 .pad
= &adv7842_pad_ops
,
3315 static const struct v4l2_subdev_internal_ops adv7842_int_ops
= {
3316 .registered
= adv7842_registered
,
3317 .unregistered
= adv7842_unregistered
,
3320 /* -------------------------- custom ctrls ---------------------------------- */
3322 static const struct v4l2_ctrl_config adv7842_ctrl_analog_sampling_phase
= {
3323 .ops
= &adv7842_ctrl_ops
,
3324 .id
= V4L2_CID_ADV_RX_ANALOG_SAMPLING_PHASE
,
3325 .name
= "Analog Sampling Phase",
3326 .type
= V4L2_CTRL_TYPE_INTEGER
,
3333 static const struct v4l2_ctrl_config adv7842_ctrl_free_run_color_manual
= {
3334 .ops
= &adv7842_ctrl_ops
,
3335 .id
= V4L2_CID_ADV_RX_FREE_RUN_COLOR_MANUAL
,
3336 .name
= "Free Running Color, Manual",
3337 .type
= V4L2_CTRL_TYPE_BOOLEAN
,
3343 static const struct v4l2_ctrl_config adv7842_ctrl_free_run_color
= {
3344 .ops
= &adv7842_ctrl_ops
,
3345 .id
= V4L2_CID_ADV_RX_FREE_RUN_COLOR
,
3346 .name
= "Free Running Color",
3347 .type
= V4L2_CTRL_TYPE_INTEGER
,
3353 static void adv7842_unregister_clients(struct v4l2_subdev
*sd
)
3355 struct adv7842_state
*state
= to_state(sd
);
3356 if (state
->i2c_avlink
)
3357 i2c_unregister_device(state
->i2c_avlink
);
3359 i2c_unregister_device(state
->i2c_cec
);
3360 if (state
->i2c_infoframe
)
3361 i2c_unregister_device(state
->i2c_infoframe
);
3362 if (state
->i2c_sdp_io
)
3363 i2c_unregister_device(state
->i2c_sdp_io
);
3365 i2c_unregister_device(state
->i2c_sdp
);
3367 i2c_unregister_device(state
->i2c_afe
);
3368 if (state
->i2c_repeater
)
3369 i2c_unregister_device(state
->i2c_repeater
);
3370 if (state
->i2c_edid
)
3371 i2c_unregister_device(state
->i2c_edid
);
3372 if (state
->i2c_hdmi
)
3373 i2c_unregister_device(state
->i2c_hdmi
);
3375 i2c_unregister_device(state
->i2c_cp
);
3377 i2c_unregister_device(state
->i2c_vdp
);
3379 state
->i2c_avlink
= NULL
;
3380 state
->i2c_cec
= NULL
;
3381 state
->i2c_infoframe
= NULL
;
3382 state
->i2c_sdp_io
= NULL
;
3383 state
->i2c_sdp
= NULL
;
3384 state
->i2c_afe
= NULL
;
3385 state
->i2c_repeater
= NULL
;
3386 state
->i2c_edid
= NULL
;
3387 state
->i2c_hdmi
= NULL
;
3388 state
->i2c_cp
= NULL
;
3389 state
->i2c_vdp
= NULL
;
3392 static struct i2c_client
*adv7842_dummy_client(struct v4l2_subdev
*sd
, const char *desc
,
3395 struct i2c_client
*client
= v4l2_get_subdevdata(sd
);
3396 struct i2c_client
*cp
;
3398 io_write(sd
, io_reg
, addr
<< 1);
3401 v4l2_err(sd
, "no %s i2c addr configured\n", desc
);
3405 cp
= i2c_new_dummy(client
->adapter
, io_read(sd
, io_reg
) >> 1);
3407 v4l2_err(sd
, "register %s on i2c addr 0x%x failed\n", desc
, addr
);
3412 static int adv7842_register_clients(struct v4l2_subdev
*sd
)
3414 struct adv7842_state
*state
= to_state(sd
);
3415 struct adv7842_platform_data
*pdata
= &state
->pdata
;
3417 state
->i2c_avlink
= adv7842_dummy_client(sd
, "avlink", pdata
->i2c_avlink
, 0xf3);
3418 state
->i2c_cec
= adv7842_dummy_client(sd
, "cec", pdata
->i2c_cec
, 0xf4);
3419 state
->i2c_infoframe
= adv7842_dummy_client(sd
, "infoframe", pdata
->i2c_infoframe
, 0xf5);
3420 state
->i2c_sdp_io
= adv7842_dummy_client(sd
, "sdp_io", pdata
->i2c_sdp_io
, 0xf2);
3421 state
->i2c_sdp
= adv7842_dummy_client(sd
, "sdp", pdata
->i2c_sdp
, 0xf1);
3422 state
->i2c_afe
= adv7842_dummy_client(sd
, "afe", pdata
->i2c_afe
, 0xf8);
3423 state
->i2c_repeater
= adv7842_dummy_client(sd
, "repeater", pdata
->i2c_repeater
, 0xf9);
3424 state
->i2c_edid
= adv7842_dummy_client(sd
, "edid", pdata
->i2c_edid
, 0xfa);
3425 state
->i2c_hdmi
= adv7842_dummy_client(sd
, "hdmi", pdata
->i2c_hdmi
, 0xfb);
3426 state
->i2c_cp
= adv7842_dummy_client(sd
, "cp", pdata
->i2c_cp
, 0xfd);
3427 state
->i2c_vdp
= adv7842_dummy_client(sd
, "vdp", pdata
->i2c_vdp
, 0xfe);
3429 if (!state
->i2c_avlink
||
3431 !state
->i2c_infoframe
||
3432 !state
->i2c_sdp_io
||
3435 !state
->i2c_repeater
||
3445 static int adv7842_probe(struct i2c_client
*client
,
3446 const struct i2c_device_id
*id
)
3448 struct adv7842_state
*state
;
3449 static const struct v4l2_dv_timings cea640x480
=
3450 V4L2_DV_BT_CEA_640X480P59_94
;
3451 struct adv7842_platform_data
*pdata
= client
->dev
.platform_data
;
3452 struct v4l2_ctrl_handler
*hdl
;
3453 struct v4l2_ctrl
*ctrl
;
3454 struct v4l2_subdev
*sd
;
3458 /* Check if the adapter supports the needed features */
3459 if (!i2c_check_functionality(client
->adapter
, I2C_FUNC_SMBUS_BYTE_DATA
))
3462 v4l_dbg(1, debug
, client
, "detecting adv7842 client on address 0x%x\n",
3466 v4l_err(client
, "No platform data!\n");
3470 state
= devm_kzalloc(&client
->dev
, sizeof(*state
), GFP_KERNEL
);
3475 state
->pdata
= *pdata
;
3476 state
->timings
= cea640x480
;
3477 state
->format
= adv7842_format_info(state
, MEDIA_BUS_FMT_YUYV8_2X8
);
3480 v4l2_i2c_subdev_init(sd
, client
, &adv7842_ops
);
3481 sd
->flags
|= V4L2_SUBDEV_FL_HAS_DEVNODE
| V4L2_SUBDEV_FL_HAS_EVENTS
;
3482 sd
->internal_ops
= &adv7842_int_ops
;
3483 state
->mode
= pdata
->mode
;
3485 state
->hdmi_port_a
= pdata
->input
== ADV7842_SELECT_HDMI_PORT_A
;
3486 state
->restart_stdi_once
= true;
3488 /* i2c access to adv7842? */
3489 rev
= adv_smbus_read_byte_data_check(client
, 0xea, false) << 8 |
3490 adv_smbus_read_byte_data_check(client
, 0xeb, false);
3491 if (rev
!= 0x2012) {
3492 v4l2_info(sd
, "got rev=0x%04x on first read attempt\n", rev
);
3493 rev
= adv_smbus_read_byte_data_check(client
, 0xea, false) << 8 |
3494 adv_smbus_read_byte_data_check(client
, 0xeb, false);
3496 if (rev
!= 0x2012) {
3497 v4l2_info(sd
, "not an adv7842 on address 0x%x (rev=0x%04x)\n",
3498 client
->addr
<< 1, rev
);
3502 if (pdata
->chip_reset
)
3505 /* control handlers */
3507 v4l2_ctrl_handler_init(hdl
, 6);
3509 /* add in ascending ID order */
3510 v4l2_ctrl_new_std(hdl
, &adv7842_ctrl_ops
,
3511 V4L2_CID_BRIGHTNESS
, -128, 127, 1, 0);
3512 v4l2_ctrl_new_std(hdl
, &adv7842_ctrl_ops
,
3513 V4L2_CID_CONTRAST
, 0, 255, 1, 128);
3514 v4l2_ctrl_new_std(hdl
, &adv7842_ctrl_ops
,
3515 V4L2_CID_SATURATION
, 0, 255, 1, 128);
3516 v4l2_ctrl_new_std(hdl
, &adv7842_ctrl_ops
,
3517 V4L2_CID_HUE
, 0, 128, 1, 0);
3518 ctrl
= v4l2_ctrl_new_std_menu(hdl
, &adv7842_ctrl_ops
,
3519 V4L2_CID_DV_RX_IT_CONTENT_TYPE
, V4L2_DV_IT_CONTENT_TYPE_NO_ITC
,
3520 0, V4L2_DV_IT_CONTENT_TYPE_NO_ITC
);
3522 ctrl
->flags
|= V4L2_CTRL_FLAG_VOLATILE
;
3524 /* custom controls */
3525 state
->detect_tx_5v_ctrl
= v4l2_ctrl_new_std(hdl
, NULL
,
3526 V4L2_CID_DV_RX_POWER_PRESENT
, 0, 3, 0, 0);
3527 state
->analog_sampling_phase_ctrl
= v4l2_ctrl_new_custom(hdl
,
3528 &adv7842_ctrl_analog_sampling_phase
, NULL
);
3529 state
->free_run_color_ctrl_manual
= v4l2_ctrl_new_custom(hdl
,
3530 &adv7842_ctrl_free_run_color_manual
, NULL
);
3531 state
->free_run_color_ctrl
= v4l2_ctrl_new_custom(hdl
,
3532 &adv7842_ctrl_free_run_color
, NULL
);
3533 state
->rgb_quantization_range_ctrl
=
3534 v4l2_ctrl_new_std_menu(hdl
, &adv7842_ctrl_ops
,
3535 V4L2_CID_DV_RX_RGB_RANGE
, V4L2_DV_RGB_RANGE_FULL
,
3536 0, V4L2_DV_RGB_RANGE_AUTO
);
3537 sd
->ctrl_handler
= hdl
;
3542 if (adv7842_s_detect_tx_5v_ctrl(sd
)) {
3547 if (adv7842_register_clients(sd
) < 0) {
3549 v4l2_err(sd
, "failed to create all i2c clients\n");
3554 INIT_DELAYED_WORK(&state
->delayed_work_enable_hotplug
,
3555 adv7842_delayed_work_enable_hotplug
);
3557 state
->pad
.flags
= MEDIA_PAD_FL_SOURCE
;
3558 err
= media_entity_pads_init(&sd
->entity
, 1, &state
->pad
);
3560 goto err_work_queues
;
3562 err
= adv7842_core_init(sd
);
3566 #if IS_ENABLED(CONFIG_VIDEO_ADV7842_CEC)
3567 state
->cec_adap
= cec_allocate_adapter(&adv7842_cec_adap_ops
,
3568 state
, dev_name(&client
->dev
),
3569 CEC_CAP_DEFAULTS
, ADV7842_MAX_ADDRS
);
3570 err
= PTR_ERR_OR_ZERO(state
->cec_adap
);
3575 v4l2_info(sd
, "%s found @ 0x%x (%s)\n", client
->name
,
3576 client
->addr
<< 1, client
->adapter
->name
);
3580 media_entity_cleanup(&sd
->entity
);
3582 cancel_delayed_work(&state
->delayed_work_enable_hotplug
);
3584 adv7842_unregister_clients(sd
);
3586 v4l2_ctrl_handler_free(hdl
);
3590 /* ----------------------------------------------------------------------- */
3592 static int adv7842_remove(struct i2c_client
*client
)
3594 struct v4l2_subdev
*sd
= i2c_get_clientdata(client
);
3595 struct adv7842_state
*state
= to_state(sd
);
3597 adv7842_irq_enable(sd
, false);
3598 cancel_delayed_work(&state
->delayed_work_enable_hotplug
);
3599 v4l2_device_unregister_subdev(sd
);
3600 media_entity_cleanup(&sd
->entity
);
3601 adv7842_unregister_clients(sd
);
3602 v4l2_ctrl_handler_free(sd
->ctrl_handler
);
3606 /* ----------------------------------------------------------------------- */
3608 static const struct i2c_device_id adv7842_id
[] = {
3612 MODULE_DEVICE_TABLE(i2c
, adv7842_id
);
3614 /* ----------------------------------------------------------------------- */
3616 static struct i2c_driver adv7842_driver
= {
3620 .probe
= adv7842_probe
,
3621 .remove
= adv7842_remove
,
3622 .id_table
= adv7842_id
,
3625 module_i2c_driver(adv7842_driver
);