x86/amd-iommu: Add function to complete a tlb flush

[linux/fpc-iii.git] / drivers / infiniband / hw / ipath / ipath_file_ops.c

/*
 * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
 * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
 *
 * This software is available to you under a choice of one of two
 * licenses.  You may choose to be licensed under the terms of the GNU
 * General Public License (GPL) Version 2, available from the file
 * COPYING in the main directory of this source tree, or the
 * OpenIB.org BSD license below:
 *
 *     Redistribution and use in source and binary forms, with or
 *     without modification, are permitted provided that the following
 *     conditions are met:
 *
 *      - Redistributions of source code must retain the above
 *        copyright notice, this list of conditions and the following
 *        disclaimer.
 *
 *      - Redistributions in binary form must reproduce the above
 *        copyright notice, this list of conditions and the following
 *        disclaimer in the documentation and/or other materials
 *        provided with the distribution.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

#include <linux/pci.h>
#include <linux/poll.h>
#include <linux/cdev.h>
#include <linux/swap.h>
#include <linux/vmalloc.h>
#include <linux/highmem.h>
#include <linux/io.h>
#include <linux/jiffies.h>
#include <linux/smp_lock.h>
#include <asm/pgtable.h>

#include "ipath_kernel.h"
#include "ipath_common.h"
#include "ipath_user_sdma.h"

static int ipath_open(struct inode *, struct file *);
static int ipath_close(struct inode *, struct file *);
static ssize_t ipath_write(struct file *, const char __user *, size_t,
                           loff_t *);
static ssize_t ipath_writev(struct kiocb *, const struct iovec *,
                            unsigned long , loff_t);
static unsigned int ipath_poll(struct file *, struct poll_table_struct *);
static int ipath_mmap(struct file *, struct vm_area_struct *);

static const struct file_operations ipath_file_ops = {
        .owner = THIS_MODULE,
        .write = ipath_write,
        .aio_write = ipath_writev,
        .open = ipath_open,
        .release = ipath_close,
        .poll = ipath_poll,
        .mmap = ipath_mmap
};

/*
 * Convert kernel virtual addresses to physical addresses so they don't
 * potentially conflict with the chip addresses used as mmap offsets.
 * It doesn't really matter what mmap offset we use as long as we can
 * interpret it correctly.
 */
static u64 cvt_kvaddr(void *p)
{
        struct page *page;
        u64 paddr = 0;

        page = vmalloc_to_page(p);
        if (page)
                paddr = page_to_pfn(page) << PAGE_SHIFT;

        return paddr;
}

static int ipath_get_base_info(struct file *fp,
                               void __user *ubase, size_t ubase_size)
{
        struct ipath_portdata *pd = port_fp(fp);
        int ret = 0;
        struct ipath_base_info *kinfo = NULL;
        struct ipath_devdata *dd = pd->port_dd;
        unsigned subport_cnt;
        int shared, master;
        size_t sz;

        subport_cnt = pd->port_subport_cnt;
        if (!subport_cnt) {
                shared = 0;
                master = 0;
                subport_cnt = 1;
        } else {
                shared = 1;
                master = !subport_fp(fp);
        }

        sz = sizeof(*kinfo);
        /* If port sharing is not requested, allow the old size structure */
        if (!shared)
                sz -= 7 * sizeof(u64);
        if (ubase_size < sz) {
                ipath_cdbg(PROC,
                           "Base size %zu, need %zu (version mismatch?)\n",
                           ubase_size, sz);
                ret = -EINVAL;
                goto bail;
        }

        kinfo = kzalloc(sizeof(*kinfo), GFP_KERNEL);
        if (kinfo == NULL) {
                ret = -ENOMEM;
                goto bail;
        }

        ret = dd->ipath_f_get_base_info(pd, kinfo);
        if (ret < 0)
                goto bail;

        kinfo->spi_rcvhdr_cnt = dd->ipath_rcvhdrcnt;
        kinfo->spi_rcvhdrent_size = dd->ipath_rcvhdrentsize;
        kinfo->spi_tidegrcnt = dd->ipath_rcvegrcnt;
        kinfo->spi_rcv_egrbufsize = dd->ipath_rcvegrbufsize;
        /*
         * have to mmap whole thing
         */
        kinfo->spi_rcv_egrbuftotlen =
                pd->port_rcvegrbuf_chunks * pd->port_rcvegrbuf_size;
        kinfo->spi_rcv_egrperchunk = pd->port_rcvegrbufs_perchunk;
        kinfo->spi_rcv_egrchunksize = kinfo->spi_rcv_egrbuftotlen /
                pd->port_rcvegrbuf_chunks;
        kinfo->spi_tidcnt = dd->ipath_rcvtidcnt / subport_cnt;
        if (master)
                kinfo->spi_tidcnt += dd->ipath_rcvtidcnt % subport_cnt;
        /*
         * for this use, may be ipath_cfgports summed over all chips that
         * are are configured and present
         */
        kinfo->spi_nports = dd->ipath_cfgports;
        /* unit (chip/board) our port is on */
        kinfo->spi_unit = dd->ipath_unit;
        /* for now, only a single page */
        kinfo->spi_tid_maxsize = PAGE_SIZE;

        /*
         * Doing this per port, and based on the skip value, etc.  This has
         * to be the actual buffer size, since the protocol code treats it
         * as an array.
         *
         * These have to be set to user addresses in the user code via mmap.
         * These values are used on return to user code for the mmap target
         * addresses only.  For 32 bit, same 44 bit address problem, so use
         * the physical address, not virtual.  Before 2.6.11, using the
         * page_address() macro worked, but in 2.6.11, even that returns the
         * full 64 bit address (upper bits all 1's).  So far, using the
         * physical addresses (or chip offsets, for chip mapping) works, but
         * no doubt some future kernel release will change that, and we'll be
         * on to yet another method of dealing with this.
         */
        kinfo->spi_rcvhdr_base = (u64) pd->port_rcvhdrq_phys;
        kinfo->spi_rcvhdr_tailaddr = (u64) pd->port_rcvhdrqtailaddr_phys;
        kinfo->spi_rcv_egrbufs = (u64) pd->port_rcvegr_phys;
        kinfo->spi_pioavailaddr = (u64) dd->ipath_pioavailregs_phys;
        kinfo->spi_status = (u64) kinfo->spi_pioavailaddr +
                (void *) dd->ipath_statusp -
                (void *) dd->ipath_pioavailregs_dma;
        if (!shared) {
                kinfo->spi_piocnt = pd->port_piocnt;
                kinfo->spi_piobufbase = (u64) pd->port_piobufs;
                kinfo->__spi_uregbase = (u64) dd->ipath_uregbase +
                        dd->ipath_ureg_align * pd->port_port;
        } else if (master) {
                kinfo->spi_piocnt = (pd->port_piocnt / subport_cnt) +
                                    (pd->port_piocnt % subport_cnt);
                /* Master's PIO buffers are after all the slave's */
                kinfo->spi_piobufbase = (u64) pd->port_piobufs +
                        dd->ipath_palign *
                        (pd->port_piocnt - kinfo->spi_piocnt);
        } else {
                unsigned slave = subport_fp(fp) - 1;

                kinfo->spi_piocnt = pd->port_piocnt / subport_cnt;
                kinfo->spi_piobufbase = (u64) pd->port_piobufs +
                        dd->ipath_palign * kinfo->spi_piocnt * slave;
        }

        if (shared) {
                kinfo->spi_port_uregbase = (u64) dd->ipath_uregbase +
                        dd->ipath_ureg_align * pd->port_port;
                kinfo->spi_port_rcvegrbuf = kinfo->spi_rcv_egrbufs;
                kinfo->spi_port_rcvhdr_base = kinfo->spi_rcvhdr_base;
                kinfo->spi_port_rcvhdr_tailaddr = kinfo->spi_rcvhdr_tailaddr;

                kinfo->__spi_uregbase = cvt_kvaddr(pd->subport_uregbase +
                        PAGE_SIZE * subport_fp(fp));

                kinfo->spi_rcvhdr_base = cvt_kvaddr(pd->subport_rcvhdr_base +
                        pd->port_rcvhdrq_size * subport_fp(fp));
                kinfo->spi_rcvhdr_tailaddr = 0;
                kinfo->spi_rcv_egrbufs = cvt_kvaddr(pd->subport_rcvegrbuf +
                        pd->port_rcvegrbuf_chunks * pd->port_rcvegrbuf_size *
                        subport_fp(fp));

                kinfo->spi_subport_uregbase =
                        cvt_kvaddr(pd->subport_uregbase);
                kinfo->spi_subport_rcvegrbuf =
                        cvt_kvaddr(pd->subport_rcvegrbuf);
                kinfo->spi_subport_rcvhdr_base =
                        cvt_kvaddr(pd->subport_rcvhdr_base);
                ipath_cdbg(PROC, "port %u flags %x %llx %llx %llx\n",
                        kinfo->spi_port, kinfo->spi_runtime_flags,
                        (unsigned long long) kinfo->spi_subport_uregbase,
                        (unsigned long long) kinfo->spi_subport_rcvegrbuf,
                        (unsigned long long) kinfo->spi_subport_rcvhdr_base);
        }

        /*
         * All user buffers are 2KB buffers.  If we ever support
         * giving 4KB buffers to user processes, this will need some
         * work.
         */
        kinfo->spi_pioindex = (kinfo->spi_piobufbase -
                (dd->ipath_piobufbase & 0xffffffff)) / dd->ipath_palign;
        kinfo->spi_pioalign = dd->ipath_palign;

        kinfo->spi_qpair = IPATH_KD_QP;
        /*
         * user mode PIO buffers are always 2KB, even when 4KB can
         * be received, and sent via the kernel; this is ibmaxlen
         * for 2K MTU.
         */
        kinfo->spi_piosize = dd->ipath_piosize2k - 2 * sizeof(u32);
        kinfo->spi_mtu = dd->ipath_ibmaxlen;    /* maxlen, not ibmtu */
        kinfo->spi_port = pd->port_port;
        kinfo->spi_subport = subport_fp(fp);
        kinfo->spi_sw_version = IPATH_KERN_SWVERSION;
        kinfo->spi_hw_version = dd->ipath_revision;

        if (master) {
                kinfo->spi_runtime_flags |= IPATH_RUNTIME_MASTER;
        }

        sz = (ubase_size < sizeof(*kinfo)) ? ubase_size : sizeof(*kinfo);
        if (copy_to_user(ubase, kinfo, sz))
                ret = -EFAULT;

bail:
        kfree(kinfo);
        return ret;
}

/**
 * ipath_tid_update - update a port TID
 * @pd: the port
 * @fp: the ipath device file
 * @ti: the TID information
 *
 * The new implementation as of Oct 2004 is that the driver assigns
 * the tid and returns it to the caller.   To make it easier to
 * catch bugs, and to reduce search time, we keep a cursor for
 * each port, walking the shadow tid array to find one that's not
 * in use.
 *
 * For now, if we can't allocate the full list, we fail, although
 * in the long run, we'll allocate as many as we can, and the
 * caller will deal with that by trying the remaining pages later.
 * That means that when we fail, we have to mark the tids as not in
 * use again, in our shadow copy.
 *
 * It's up to the caller to free the tids when they are done.
 * We'll unlock the pages as they free them.
 *
 * Also, right now we are locking one page at a time, but since
 * the intended use of this routine is for a single group of
 * virtually contiguous pages, that should change to improve
 * performance.
 */
static int ipath_tid_update(struct ipath_portdata *pd, struct file *fp,
                            const struct ipath_tid_info *ti)
{
        int ret = 0, ntids;
        u32 tid, porttid, cnt, i, tidcnt, tidoff;
        u16 *tidlist;
        struct ipath_devdata *dd = pd->port_dd;
        u64 physaddr;
        unsigned long vaddr;
        u64 __iomem *tidbase;
        unsigned long tidmap[8];
        struct page **pagep = NULL;
        unsigned subport = subport_fp(fp);

        if (!dd->ipath_pageshadow) {
                ret = -ENOMEM;
                goto done;
        }

        cnt = ti->tidcnt;
        if (!cnt) {
                ipath_dbg("After copyin, tidcnt 0, tidlist %llx\n",
                          (unsigned long long) ti->tidlist);
                /*
                 * Should we treat as success?  likely a bug
                 */
                ret = -EFAULT;
                goto done;
        }
        porttid = pd->port_port * dd->ipath_rcvtidcnt;
        if (!pd->port_subport_cnt) {
                tidcnt = dd->ipath_rcvtidcnt;
                tid = pd->port_tidcursor;
                tidoff = 0;
        } else if (!subport) {
                tidcnt = (dd->ipath_rcvtidcnt / pd->port_subport_cnt) +
                         (dd->ipath_rcvtidcnt % pd->port_subport_cnt);
                tidoff = dd->ipath_rcvtidcnt - tidcnt;
                porttid += tidoff;
                tid = tidcursor_fp(fp);
        } else {
                tidcnt = dd->ipath_rcvtidcnt / pd->port_subport_cnt;
                tidoff = tidcnt * (subport - 1);
                porttid += tidoff;
                tid = tidcursor_fp(fp);
        }
        if (cnt > tidcnt) {
                /* make sure it all fits in port_tid_pg_list */
                dev_info(&dd->pcidev->dev, "Process tried to allocate %u "
                         "TIDs, only trying max (%u)\n", cnt, tidcnt);
                cnt = tidcnt;
        }
        pagep = &((struct page **) pd->port_tid_pg_list)[tidoff];
        tidlist = &((u16 *) &pagep[dd->ipath_rcvtidcnt])[tidoff];

        memset(tidmap, 0, sizeof(tidmap));
        /* before decrement; chip actual # */
        ntids = tidcnt;
        tidbase = (u64 __iomem *) (((char __iomem *) dd->ipath_kregbase) +
                                   dd->ipath_rcvtidbase +
                                   porttid * sizeof(*tidbase));

        ipath_cdbg(VERBOSE, "Port%u %u tids, cursor %u, tidbase %p\n",
                   pd->port_port, cnt, tid, tidbase);

        /* virtual address of first page in transfer */
        vaddr = ti->tidvaddr;
        if (!access_ok(VERIFY_WRITE, (void __user *) vaddr,
                       cnt * PAGE_SIZE)) {
                ipath_dbg("Fail vaddr %p, %u pages, !access_ok\n",
                          (void *)vaddr, cnt);
                ret = -EFAULT;
                goto done;
        }
        ret = ipath_get_user_pages(vaddr, cnt, pagep);
        if (ret) {
                if (ret == -EBUSY) {
                        ipath_dbg("Failed to lock addr %p, %u pages "
                                  "(already locked)\n",
                                  (void *) vaddr, cnt);
                        /*
                         * for now, continue, and see what happens but with
                         * the new implementation, this should never happen,
                         * unless perhaps the user has mpin'ed the pages
                         * themselves (something we need to test)
                         */
                        ret = 0;
                } else {
                        dev_info(&dd->pcidev->dev,
                                 "Failed to lock addr %p, %u pages: "
                                 "errno %d\n", (void *) vaddr, cnt, -ret);
                        goto done;
                }
        }
        for (i = 0; i < cnt; i++, vaddr += PAGE_SIZE) {
                for (; ntids--; tid++) {
                        if (tid == tidcnt)
                                tid = 0;
                        if (!dd->ipath_pageshadow[porttid + tid])
                                break;
                }
                if (ntids < 0) {
                        /*
                         * oops, wrapped all the way through their TIDs,
                         * and didn't have enough free; see comments at
                         * start of routine
                         */
                        ipath_dbg("Not enough free TIDs for %u pages "
                                  "(index %d), failing\n", cnt, i);
                        i--;    /* last tidlist[i] not filled in */
                        ret = -ENOMEM;
                        break;
                }
                tidlist[i] = tid + tidoff;
                ipath_cdbg(VERBOSE, "Updating idx %u to TID %u, "
                           "vaddr %lx\n", i, tid + tidoff, vaddr);
                /* we "know" system pages and TID pages are same size */
                dd->ipath_pageshadow[porttid + tid] = pagep[i];
                dd->ipath_physshadow[porttid + tid] = ipath_map_page(
                        dd->pcidev, pagep[i], 0, PAGE_SIZE,
                        PCI_DMA_FROMDEVICE);
                /*
                 * don't need atomic or it's overhead
                 */
                __set_bit(tid, tidmap);
                physaddr = dd->ipath_physshadow[porttid + tid];
                ipath_stats.sps_pagelocks++;
                ipath_cdbg(VERBOSE,
                           "TID %u, vaddr %lx, physaddr %llx pgp %p\n",
                           tid, vaddr, (unsigned long long) physaddr,
                           pagep[i]);
                dd->ipath_f_put_tid(dd, &tidbase[tid], RCVHQ_RCV_TYPE_EXPECTED,
                                    physaddr);
                /*
                 * don't check this tid in ipath_portshadow, since we
                 * just filled it in; start with the next one.
                 */
                tid++;
        }

        if (ret) {
                u32 limit;
        cleanup:
                /* jump here if copy out of updated info failed... */
                ipath_dbg("After failure (ret=%d), undo %d of %d entries\n",
                          -ret, i, cnt);
                /* same code that's in ipath_free_tid() */
                limit = sizeof(tidmap) * BITS_PER_BYTE;
                if (limit > tidcnt)
                        /* just in case size changes in future */
                        limit = tidcnt;
                tid = find_first_bit((const unsigned long *)tidmap, limit);
                for (; tid < limit; tid++) {
                        if (!test_bit(tid, tidmap))
                                continue;
                        if (dd->ipath_pageshadow[porttid + tid]) {
                                ipath_cdbg(VERBOSE, "Freeing TID %u\n",
                                           tid);
                                dd->ipath_f_put_tid(dd, &tidbase[tid],
                                                    RCVHQ_RCV_TYPE_EXPECTED,
                                                    dd->ipath_tidinvalid);
                                pci_unmap_page(dd->pcidev,
                                        dd->ipath_physshadow[porttid + tid],
                                        PAGE_SIZE, PCI_DMA_FROMDEVICE);
                                dd->ipath_pageshadow[porttid + tid] = NULL;
                                ipath_stats.sps_pageunlocks++;
                        }
                }
                ipath_release_user_pages(pagep, cnt);
        } else {
                /*
                 * Copy the updated array, with ipath_tid's filled in, back
                 * to user.  Since we did the copy in already, this "should
                 * never fail" If it does, we have to clean up...
                 */
                if (copy_to_user((void __user *)
                                 (unsigned long) ti->tidlist,
                                 tidlist, cnt * sizeof(*tidlist))) {
                        ret = -EFAULT;
                        goto cleanup;
                }
                if (copy_to_user((void __user *) (unsigned long) ti->tidmap,
                                 tidmap, sizeof tidmap)) {
                        ret = -EFAULT;
                        goto cleanup;
                }
                if (tid == tidcnt)
                        tid = 0;
                if (!pd->port_subport_cnt)
                        pd->port_tidcursor = tid;
                else
                        tidcursor_fp(fp) = tid;
        }

done:
        if (ret)
                ipath_dbg("Failed to map %u TID pages, failing with %d\n",
                          ti->tidcnt, -ret);
        return ret;
}

/**
 * ipath_tid_free - free a port TID
 * @pd: the port
 * @subport: the subport
 * @ti: the TID info
 *
 * right now we are unlocking one page at a time, but since
 * the intended use of this routine is for a single group of
 * virtually contiguous pages, that should change to improve
 * performance.  We check that the TID is in range for this port
 * but otherwise don't check validity; if user has an error and
 * frees the wrong tid, it's only their own data that can thereby
 * be corrupted.  We do check that the TID was in use, for sanity
 * We always use our idea of the saved address, not the address that
 * they pass in to us.
 */

static int ipath_tid_free(struct ipath_portdata *pd, unsigned subport,
                          const struct ipath_tid_info *ti)
{
        int ret = 0;
        u32 tid, porttid, cnt, limit, tidcnt;
        struct ipath_devdata *dd = pd->port_dd;
        u64 __iomem *tidbase;
        unsigned long tidmap[8];

        if (!dd->ipath_pageshadow) {
                ret = -ENOMEM;
                goto done;
        }

        if (copy_from_user(tidmap, (void __user *)(unsigned long)ti->tidmap,
                           sizeof tidmap)) {
                ret = -EFAULT;
                goto done;
        }

        porttid = pd->port_port * dd->ipath_rcvtidcnt;
        if (!pd->port_subport_cnt)
                tidcnt = dd->ipath_rcvtidcnt;
        else if (!subport) {
                tidcnt = (dd->ipath_rcvtidcnt / pd->port_subport_cnt) +
                         (dd->ipath_rcvtidcnt % pd->port_subport_cnt);
                porttid += dd->ipath_rcvtidcnt - tidcnt;
        } else {
                tidcnt = dd->ipath_rcvtidcnt / pd->port_subport_cnt;
                porttid += tidcnt * (subport - 1);
        }
        tidbase = (u64 __iomem *) ((char __iomem *)(dd->ipath_kregbase) +
                                   dd->ipath_rcvtidbase +
                                   porttid * sizeof(*tidbase));

        limit = sizeof(tidmap) * BITS_PER_BYTE;
        if (limit > tidcnt)
                /* just in case size changes in future */
                limit = tidcnt;
        tid = find_first_bit(tidmap, limit);
        ipath_cdbg(VERBOSE, "Port%u free %u tids; first bit (max=%d) "
                   "set is %d, porttid %u\n", pd->port_port, ti->tidcnt,
                   limit, tid, porttid);
        for (cnt = 0; tid < limit; tid++) {
                /*
                 * small optimization; if we detect a run of 3 or so without
                 * any set, use find_first_bit again.  That's mainly to
                 * accelerate the case where we wrapped, so we have some at
                 * the beginning, and some at the end, and a big gap
                 * in the middle.
                 */
                if (!test_bit(tid, tidmap))
                        continue;
                cnt++;
                if (dd->ipath_pageshadow[porttid + tid]) {
                        struct page *p;
                        p = dd->ipath_pageshadow[porttid + tid];
                        dd->ipath_pageshadow[porttid + tid] = NULL;
                        ipath_cdbg(VERBOSE, "PID %u freeing TID %u\n",
                                   pid_nr(pd->port_pid), tid);
                        dd->ipath_f_put_tid(dd, &tidbase[tid],
                                            RCVHQ_RCV_TYPE_EXPECTED,
                                            dd->ipath_tidinvalid);
                        pci_unmap_page(dd->pcidev,
                                dd->ipath_physshadow[porttid + tid],
                                PAGE_SIZE, PCI_DMA_FROMDEVICE);
                        ipath_release_user_pages(&p, 1);
                        ipath_stats.sps_pageunlocks++;
                } else
                        ipath_dbg("Unused tid %u, ignoring\n", tid);
        }
        if (cnt != ti->tidcnt)
                ipath_dbg("passed in tidcnt %d, only %d bits set in map\n",
                          ti->tidcnt, cnt);
done:
        if (ret)
                ipath_dbg("Failed to unmap %u TID pages, failing with %d\n",
                          ti->tidcnt, -ret);
        return ret;
}

/**
 * ipath_set_part_key - set a partition key
 * @pd: the port
 * @key: the key
 *
 * We can have up to 4 active at a time (other than the default, which is
 * always allowed).  This is somewhat tricky, since multiple ports may set
 * the same key, so we reference count them, and clean up at exit.  All 4
 * partition keys are packed into a single infinipath register.  It's an
 * error for a process to set the same pkey multiple times.  We provide no
 * mechanism to de-allocate a pkey at this time, we may eventually need to
 * do that.  I've used the atomic operations, and no locking, and only make
 * a single pass through what's available.  This should be more than
 * adequate for some time. I'll think about spinlocks or the like if and as
 * it's necessary.
 */
static int ipath_set_part_key(struct ipath_portdata *pd, u16 key)
{
        struct ipath_devdata *dd = pd->port_dd;
        int i, any = 0, pidx = -1;
        u16 lkey = key & 0x7FFF;
        int ret;

        if (lkey == (IPATH_DEFAULT_P_KEY & 0x7FFF)) {
                /* nothing to do; this key always valid */
                ret = 0;
                goto bail;
        }

        ipath_cdbg(VERBOSE, "p%u try to set pkey %hx, current keys "
                   "%hx:%x %hx:%x %hx:%x %hx:%x\n",
                   pd->port_port, key, dd->ipath_pkeys[0],
                   atomic_read(&dd->ipath_pkeyrefs[0]), dd->ipath_pkeys[1],
                   atomic_read(&dd->ipath_pkeyrefs[1]), dd->ipath_pkeys[2],
                   atomic_read(&dd->ipath_pkeyrefs[2]), dd->ipath_pkeys[3],
                   atomic_read(&dd->ipath_pkeyrefs[3]));

        if (!lkey) {
                ipath_cdbg(PROC, "p%u tries to set key 0, not allowed\n",
                           pd->port_port);
                ret = -EINVAL;
                goto bail;
        }

        /*
         * Set the full membership bit, because it has to be
         * set in the register or the packet, and it seems
         * cleaner to set in the register than to force all
         * callers to set it. (see bug 4331)
         */
        key |= 0x8000;

        for (i = 0; i < ARRAY_SIZE(pd->port_pkeys); i++) {
                if (!pd->port_pkeys[i] && pidx == -1)
                        pidx = i;
                if (pd->port_pkeys[i] == key) {
                        ipath_cdbg(VERBOSE, "p%u tries to set same pkey "
                                   "(%x) more than once\n",
                                   pd->port_port, key);
                        ret = -EEXIST;
                        goto bail;
                }
        }
        if (pidx == -1) {
                ipath_dbg("All pkeys for port %u already in use, "
                          "can't set %x\n", pd->port_port, key);
                ret = -EBUSY;
                goto bail;
        }
        for (any = i = 0; i < ARRAY_SIZE(dd->ipath_pkeys); i++) {
                if (!dd->ipath_pkeys[i]) {
                        any++;
                        continue;
                }
                if (dd->ipath_pkeys[i] == key) {
                        atomic_t *pkrefs = &dd->ipath_pkeyrefs[i];

                        if (atomic_inc_return(pkrefs) > 1) {
                                pd->port_pkeys[pidx] = key;
                                ipath_cdbg(VERBOSE, "p%u set key %x "
                                           "matches #%d, count now %d\n",
                                           pd->port_port, key, i,
                                           atomic_read(pkrefs));
                                ret = 0;
                                goto bail;
                        } else {
                                /*
                                 * lost race, decrement count, catch below
                                 */
                                atomic_dec(pkrefs);
                                ipath_cdbg(VERBOSE, "Lost race, count was "
                                           "0, after dec, it's %d\n",
                                           atomic_read(pkrefs));
                                any++;
                        }
                }
                if ((dd->ipath_pkeys[i] & 0x7FFF) == lkey) {
                        /*
                         * It makes no sense to have both the limited and
                         * full membership PKEY set at the same time since
                         * the unlimited one will disable the limited one.
                         */
                        ret = -EEXIST;
                        goto bail;
                }
        }
        if (!any) {
                ipath_dbg("port %u, all pkeys already in use, "
                          "can't set %x\n", pd->port_port, key);
                ret = -EBUSY;
                goto bail;
        }
        for (any = i = 0; i < ARRAY_SIZE(dd->ipath_pkeys); i++) {
                if (!dd->ipath_pkeys[i] &&
                    atomic_inc_return(&dd->ipath_pkeyrefs[i]) == 1) {
                        u64 pkey;

                        /* for ipathstats, etc. */
                        ipath_stats.sps_pkeys[i] = lkey;
                        pd->port_pkeys[pidx] = dd->ipath_pkeys[i] = key;
                        pkey =
                                (u64) dd->ipath_pkeys[0] |
                                ((u64) dd->ipath_pkeys[1] << 16) |
                                ((u64) dd->ipath_pkeys[2] << 32) |
                                ((u64) dd->ipath_pkeys[3] << 48);
                        ipath_cdbg(PROC, "p%u set key %x in #%d, "
                                   "portidx %d, new pkey reg %llx\n",
                                   pd->port_port, key, i, pidx,
                                   (unsigned long long) pkey);
                        ipath_write_kreg(
                                dd, dd->ipath_kregs->kr_partitionkey, pkey);

                        ret = 0;
                        goto bail;
                }
        }
        ipath_dbg("port %u, all pkeys already in use 2nd pass, "
                  "can't set %x\n", pd->port_port, key);
        ret = -EBUSY;

bail:
        return ret;
}

/**
 * ipath_manage_rcvq - manage a port's receive queue
 * @pd: the port
 * @subport: the subport
 * @start_stop: action to carry out
 *
 * start_stop == 0 disables receive on the port, for use in queue
 * overflow conditions.  start_stop==1 re-enables, to be used to
 * re-init the software copy of the head register
 */
static int ipath_manage_rcvq(struct ipath_portdata *pd, unsigned subport,
                             int start_stop)
{
        struct ipath_devdata *dd = pd->port_dd;

        ipath_cdbg(PROC, "%sabling rcv for unit %u port %u:%u\n",
                   start_stop ? "en" : "dis", dd->ipath_unit,
                   pd->port_port, subport);
        if (subport)
                goto bail;
        /* atomically clear receive enable port. */
        if (start_stop) {
                /*
                 * On enable, force in-memory copy of the tail register to
                 * 0, so that protocol code doesn't have to worry about
                 * whether or not the chip has yet updated the in-memory
                 * copy or not on return from the system call. The chip
                 * always resets it's tail register back to 0 on a
                 * transition from disabled to enabled.  This could cause a
                 * problem if software was broken, and did the enable w/o
                 * the disable, but eventually the in-memory copy will be
                 * updated and correct itself, even in the face of software
                 * bugs.
                 */
                if (pd->port_rcvhdrtail_kvaddr)
                        ipath_clear_rcvhdrtail(pd);
                set_bit(dd->ipath_r_portenable_shift + pd->port_port,
                        &dd->ipath_rcvctrl);
        } else
                clear_bit(dd->ipath_r_portenable_shift + pd->port_port,
                          &dd->ipath_rcvctrl);
        ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
                         dd->ipath_rcvctrl);
        /* now be sure chip saw it before we return */
        ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
        if (start_stop) {
                /*
                 * And try to be sure that tail reg update has happened too.
                 * This should in theory interlock with the RXE changes to
                 * the tail register.  Don't assign it to the tail register
                 * in memory copy, since we could overwrite an update by the
                 * chip if we did.
                 */
                ipath_read_ureg32(dd, ur_rcvhdrtail, pd->port_port);
        }
        /* always; new head should be equal to new tail; see above */
bail:
        return 0;
}

static void ipath_clean_part_key(struct ipath_portdata *pd,
                                 struct ipath_devdata *dd)
{
        int i, j, pchanged = 0;
        u64 oldpkey;

        /* for debugging only */
        oldpkey = (u64) dd->ipath_pkeys[0] |
                ((u64) dd->ipath_pkeys[1] << 16) |
                ((u64) dd->ipath_pkeys[2] << 32) |
                ((u64) dd->ipath_pkeys[3] << 48);

        for (i = 0; i < ARRAY_SIZE(pd->port_pkeys); i++) {
                if (!pd->port_pkeys[i])
                        continue;
                ipath_cdbg(VERBOSE, "look for key[%d] %hx in pkeys\n", i,
                           pd->port_pkeys[i]);
                for (j = 0; j < ARRAY_SIZE(dd->ipath_pkeys); j++) {
                        /* check for match independent of the global bit */
                        if ((dd->ipath_pkeys[j] & 0x7fff) !=
                            (pd->port_pkeys[i] & 0x7fff))
                                continue;
                        if (atomic_dec_and_test(&dd->ipath_pkeyrefs[j])) {
                                ipath_cdbg(VERBOSE, "p%u clear key "
                                           "%x matches #%d\n",
                                           pd->port_port,
                                           pd->port_pkeys[i], j);
                                ipath_stats.sps_pkeys[j] =
                                        dd->ipath_pkeys[j] = 0;
                                pchanged++;
                        }
                        else ipath_cdbg(
                                VERBOSE, "p%u key %x matches #%d, "
                                "but ref still %d\n", pd->port_port,
                                pd->port_pkeys[i], j,
                                atomic_read(&dd->ipath_pkeyrefs[j]));
                        break;
                }
                pd->port_pkeys[i] = 0;
        }
        if (pchanged) {
                u64 pkey = (u64) dd->ipath_pkeys[0] |
                        ((u64) dd->ipath_pkeys[1] << 16) |
                        ((u64) dd->ipath_pkeys[2] << 32) |
                        ((u64) dd->ipath_pkeys[3] << 48);
                ipath_cdbg(VERBOSE, "p%u old pkey reg %llx, "
                           "new pkey reg %llx\n", pd->port_port,
                           (unsigned long long) oldpkey,
                           (unsigned long long) pkey);
                ipath_write_kreg(dd, dd->ipath_kregs->kr_partitionkey,
                                 pkey);
        }
}

/*
 * Initialize the port data with the receive buffer sizes
 * so this can be done while the master port is locked.
 * Otherwise, there is a race with a slave opening the port
 * and seeing these fields uninitialized.
 */
static void init_user_egr_sizes(struct ipath_portdata *pd)
{
        struct ipath_devdata *dd = pd->port_dd;
        unsigned egrperchunk, egrcnt, size;

        /*
         * to avoid wasting a lot of memory, we allocate 32KB chunks of
         * physically contiguous memory, advance through it until used up
         * and then allocate more.  Of course, we need memory to store those
         * extra pointers, now.  Started out with 256KB, but under heavy
         * memory pressure (creating large files and then copying them over
         * NFS while doing lots of MPI jobs), we hit some allocation
         * failures, even though we can sleep...  (2.6.10) Still get
         * failures at 64K.  32K is the lowest we can go without wasting
         * additional memory.
         */
        size = 0x8000;
        egrperchunk = size / dd->ipath_rcvegrbufsize;
        egrcnt = dd->ipath_rcvegrcnt;
        pd->port_rcvegrbuf_chunks = (egrcnt + egrperchunk - 1) / egrperchunk;
        pd->port_rcvegrbufs_perchunk = egrperchunk;
        pd->port_rcvegrbuf_size = size;
}

/**
 * ipath_create_user_egr - allocate eager TID buffers
 * @pd: the port to allocate TID buffers for
 *
 * This routine is now quite different for user and kernel, because
 * the kernel uses skb's, for the accelerated network performance
 * This is the user port version
 *
 * Allocate the eager TID buffers and program them into infinipath
 * They are no longer completely contiguous, we do multiple allocation
 * calls.
 */
static int ipath_create_user_egr(struct ipath_portdata *pd)
{
        struct ipath_devdata *dd = pd->port_dd;
        unsigned e, egrcnt, egrperchunk, chunk, egrsize, egroff;
        size_t size;
        int ret;
        gfp_t gfp_flags;

        /*
         * GFP_USER, but without GFP_FS, so buffer cache can be
         * coalesced (we hope); otherwise, even at order 4,
         * heavy filesystem activity makes these fail, and we can
         * use compound pages.
         */
        gfp_flags = __GFP_WAIT | __GFP_IO | __GFP_COMP;

        egrcnt = dd->ipath_rcvegrcnt;
        /* TID number offset for this port */
        egroff = (pd->port_port - 1) * egrcnt + dd->ipath_p0_rcvegrcnt;
        egrsize = dd->ipath_rcvegrbufsize;
        ipath_cdbg(VERBOSE, "Allocating %d egr buffers, at egrtid "
                   "offset %x, egrsize %u\n", egrcnt, egroff, egrsize);

        chunk = pd->port_rcvegrbuf_chunks;
        egrperchunk = pd->port_rcvegrbufs_perchunk;
        size = pd->port_rcvegrbuf_size;
        pd->port_rcvegrbuf = kmalloc(chunk * sizeof(pd->port_rcvegrbuf[0]),
                                     GFP_KERNEL);
        if (!pd->port_rcvegrbuf) {
                ret = -ENOMEM;
                goto bail;
        }
        pd->port_rcvegrbuf_phys =
                kmalloc(chunk * sizeof(pd->port_rcvegrbuf_phys[0]),
                        GFP_KERNEL);
        if (!pd->port_rcvegrbuf_phys) {
                ret = -ENOMEM;
                goto bail_rcvegrbuf;
        }
        for (e = 0; e < pd->port_rcvegrbuf_chunks; e++) {

                pd->port_rcvegrbuf[e] = dma_alloc_coherent(
                        &dd->pcidev->dev, size, &pd->port_rcvegrbuf_phys[e],
                        gfp_flags);

                if (!pd->port_rcvegrbuf[e]) {
                        ret = -ENOMEM;
                        goto bail_rcvegrbuf_phys;
                }
        }

        pd->port_rcvegr_phys = pd->port_rcvegrbuf_phys[0];

        for (e = chunk = 0; chunk < pd->port_rcvegrbuf_chunks; chunk++) {
                dma_addr_t pa = pd->port_rcvegrbuf_phys[chunk];
                unsigned i;

                for (i = 0; e < egrcnt && i < egrperchunk; e++, i++) {
                        dd->ipath_f_put_tid(dd, e + egroff +
                                            (u64 __iomem *)
                                            ((char __iomem *)
                                             dd->ipath_kregbase +
                                             dd->ipath_rcvegrbase),
                                            RCVHQ_RCV_TYPE_EAGER, pa);
                        pa += egrsize;
                }
                cond_resched(); /* don't hog the cpu */
        }

        ret = 0;
        goto bail;

bail_rcvegrbuf_phys:
        for (e = 0; e < pd->port_rcvegrbuf_chunks &&
                pd->port_rcvegrbuf[e]; e++) {
                dma_free_coherent(&dd->pcidev->dev, size,
                                  pd->port_rcvegrbuf[e],
                                  pd->port_rcvegrbuf_phys[e]);

        }
        kfree(pd->port_rcvegrbuf_phys);
        pd->port_rcvegrbuf_phys = NULL;
bail_rcvegrbuf:
        kfree(pd->port_rcvegrbuf);
        pd->port_rcvegrbuf = NULL;
bail:
        return ret;
}


/* common code for the mappings on dma_alloc_coherent mem */
static int ipath_mmap_mem(struct vm_area_struct *vma,
        struct ipath_portdata *pd, unsigned len, int write_ok,
        void *kvaddr, char *what)
{
        struct ipath_devdata *dd = pd->port_dd;
        unsigned long pfn;
        int ret;

        if ((vma->vm_end - vma->vm_start) > len) {
                dev_info(&dd->pcidev->dev,
                         "FAIL on %s: len %lx > %x\n", what,
                         vma->vm_end - vma->vm_start, len);
                ret = -EFAULT;
                goto bail;
        }

        if (!write_ok) {
                if (vma->vm_flags & VM_WRITE) {
                        dev_info(&dd->pcidev->dev,
                                 "%s must be mapped readonly\n", what);
                        ret = -EPERM;
                        goto bail;
                }

                /* don't allow them to later change with mprotect */
                vma->vm_flags &= ~VM_MAYWRITE;
        }

        pfn = virt_to_phys(kvaddr) >> PAGE_SHIFT;
        ret = remap_pfn_range(vma, vma->vm_start, pfn,
                              len, vma->vm_page_prot);
        if (ret)
                dev_info(&dd->pcidev->dev, "%s port%u mmap of %lx, %x "
                         "bytes r%c failed: %d\n", what, pd->port_port,
                         pfn, len, write_ok?'w':'o', ret);
        else
                ipath_cdbg(VERBOSE, "%s port%u mmaped %lx, %x bytes "
                           "r%c\n", what, pd->port_port, pfn, len,
                           write_ok?'w':'o');
bail:
        return ret;
}

static int mmap_ureg(struct vm_area_struct *vma, struct ipath_devdata *dd,
                     u64 ureg)
{
        unsigned long phys;
        int ret;

        /*
         * This is real hardware, so use io_remap.  This is the mechanism
         * for the user process to update the head registers for their port
         * in the chip.
         */
        if ((vma->vm_end - vma->vm_start) > PAGE_SIZE) {
                dev_info(&dd->pcidev->dev, "FAIL mmap userreg: reqlen "
                         "%lx > PAGE\n", vma->vm_end - vma->vm_start);
                ret = -EFAULT;
        } else {
                phys = dd->ipath_physaddr + ureg;
                vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);

                vma->vm_flags |= VM_DONTCOPY | VM_DONTEXPAND;
                ret = io_remap_pfn_range(vma, vma->vm_start,
                                         phys >> PAGE_SHIFT,
                                         vma->vm_end - vma->vm_start,
                                         vma->vm_page_prot);
        }
        return ret;
}

static int mmap_piobufs(struct vm_area_struct *vma,
                        struct ipath_devdata *dd,
                        struct ipath_portdata *pd,
                        unsigned piobufs, unsigned piocnt)
{
        unsigned long phys;
        int ret;

        /*
         * When we map the PIO buffers in the chip, we want to map them as
         * writeonly, no read possible.   This prevents access to previous
         * process data, and catches users who might try to read the i/o
         * space due to a bug.
         */
        if ((vma->vm_end - vma->vm_start) > (piocnt * dd->ipath_palign)) {
                dev_info(&dd->pcidev->dev, "FAIL mmap piobufs: "
                         "reqlen %lx > PAGE\n",
                         vma->vm_end - vma->vm_start);
                ret = -EINVAL;
                goto bail;
        }

        phys = dd->ipath_physaddr + piobufs;

#if defined(__powerpc__)
        /* There isn't a generic way to specify writethrough mappings */
        pgprot_val(vma->vm_page_prot) |= _PAGE_NO_CACHE;
        pgprot_val(vma->vm_page_prot) |= _PAGE_WRITETHRU;
        pgprot_val(vma->vm_page_prot) &= ~_PAGE_GUARDED;
#endif

        /*
         * don't allow them to later change to readable with mprotect (for when
         * not initially mapped readable, as is normally the case)
         */
        vma->vm_flags &= ~VM_MAYREAD;
        vma->vm_flags |= VM_DONTCOPY | VM_DONTEXPAND;

        ret = io_remap_pfn_range(vma, vma->vm_start, phys >> PAGE_SHIFT,
                                 vma->vm_end - vma->vm_start,
                                 vma->vm_page_prot);
bail:
        return ret;
}

static int mmap_rcvegrbufs(struct vm_area_struct *vma,
                           struct ipath_portdata *pd)
{
        struct ipath_devdata *dd = pd->port_dd;
        unsigned long start, size;
        size_t total_size, i;
        unsigned long pfn;
        int ret;

        size = pd->port_rcvegrbuf_size;
        total_size = pd->port_rcvegrbuf_chunks * size;
        if ((vma->vm_end - vma->vm_start) > total_size) {
                dev_info(&dd->pcidev->dev, "FAIL on egr bufs: "
                         "reqlen %lx > actual %lx\n",
                         vma->vm_end - vma->vm_start,
                         (unsigned long) total_size);
                ret = -EINVAL;
                goto bail;
        }

        if (vma->vm_flags & VM_WRITE) {
                dev_info(&dd->pcidev->dev, "Can't map eager buffers as "
                         "writable (flags=%lx)\n", vma->vm_flags);
                ret = -EPERM;
                goto bail;
        }
        /* don't allow them to later change to writeable with mprotect */
        vma->vm_flags &= ~VM_MAYWRITE;

        start = vma->vm_start;

        for (i = 0; i < pd->port_rcvegrbuf_chunks; i++, start += size) {
                pfn = virt_to_phys(pd->port_rcvegrbuf[i]) >> PAGE_SHIFT;
                ret = remap_pfn_range(vma, start, pfn, size,
                                      vma->vm_page_prot);
                if (ret < 0)
                        goto bail;
        }
        ret = 0;

bail:
        return ret;
}

/*
 * ipath_file_vma_fault - handle a VMA page fault.
 */
static int ipath_file_vma_fault(struct vm_area_struct *vma,
                                        struct vm_fault *vmf)
{
        struct page *page;

        page = vmalloc_to_page((void *)(vmf->pgoff << PAGE_SHIFT));
        if (!page)
                return VM_FAULT_SIGBUS;
        get_page(page);
        vmf->page = page;

        return 0;
}

static const struct vm_operations_struct ipath_file_vm_ops = {
        .fault = ipath_file_vma_fault,
};

static int mmap_kvaddr(struct vm_area_struct *vma, u64 pgaddr,
                       struct ipath_portdata *pd, unsigned subport)
{
        unsigned long len;
        struct ipath_devdata *dd;
        void *addr;
        size_t size;
        int ret = 0;

        /* If the port is not shared, all addresses should be physical */
        if (!pd->port_subport_cnt)
                goto bail;

        dd = pd->port_dd;
        size = pd->port_rcvegrbuf_chunks * pd->port_rcvegrbuf_size;

        /*
         * Each process has all the subport uregbase, rcvhdrq, and
         * rcvegrbufs mmapped - as an array for all the processes,
         * and also separately for this process.
         */
        if (pgaddr == cvt_kvaddr(pd->subport_uregbase)) {
                addr = pd->subport_uregbase;
                size = PAGE_SIZE * pd->port_subport_cnt;
        } else if (pgaddr == cvt_kvaddr(pd->subport_rcvhdr_base)) {
                addr = pd->subport_rcvhdr_base;
                size = pd->port_rcvhdrq_size * pd->port_subport_cnt;
        } else if (pgaddr == cvt_kvaddr(pd->subport_rcvegrbuf)) {
                addr = pd->subport_rcvegrbuf;
                size *= pd->port_subport_cnt;
        } else if (pgaddr == cvt_kvaddr(pd->subport_uregbase +
                                        PAGE_SIZE * subport)) {
                addr = pd->subport_uregbase + PAGE_SIZE * subport;
                size = PAGE_SIZE;
        } else if (pgaddr == cvt_kvaddr(pd->subport_rcvhdr_base +
                                pd->port_rcvhdrq_size * subport)) {
                addr = pd->subport_rcvhdr_base +
                        pd->port_rcvhdrq_size * subport;
                size = pd->port_rcvhdrq_size;
        } else if (pgaddr == cvt_kvaddr(pd->subport_rcvegrbuf +
                               size * subport)) {
                addr = pd->subport_rcvegrbuf + size * subport;
                /* rcvegrbufs are read-only on the slave */
                if (vma->vm_flags & VM_WRITE) {
                        dev_info(&dd->pcidev->dev,
                                 "Can't map eager buffers as "
                                 "writable (flags=%lx)\n", vma->vm_flags);
                        ret = -EPERM;
                        goto bail;
                }
                /*
                 * Don't allow permission to later change to writeable
                 * with mprotect.
                 */
                vma->vm_flags &= ~VM_MAYWRITE;
        } else {
                goto bail;
        }
        len = vma->vm_end - vma->vm_start;
        if (len > size) {
                ipath_cdbg(MM, "FAIL: reqlen %lx > %zx\n", len, size);
                ret = -EINVAL;
                goto bail;
        }

        vma->vm_pgoff = (unsigned long) addr >> PAGE_SHIFT;
        vma->vm_ops = &ipath_file_vm_ops;
        vma->vm_flags |= VM_RESERVED | VM_DONTEXPAND;
        ret = 1;

bail:
        return ret;
}

/**
 * ipath_mmap - mmap various structures into user space
 * @fp: the file pointer
 * @vma: the VM area
 *
 * We use this to have a shared buffer between the kernel and the user code
 * for the rcvhdr queue, egr buffers, and the per-port user regs and pio
 * buffers in the chip.  We have the open and close entries so we can bump
 * the ref count and keep the driver from being unloaded while still mapped.
 */
static int ipath_mmap(struct file *fp, struct vm_area_struct *vma)
{
        struct ipath_portdata *pd;
        struct ipath_devdata *dd;
        u64 pgaddr, ureg;
        unsigned piobufs, piocnt;
        int ret;

        pd = port_fp(fp);
        if (!pd) {
                ret = -EINVAL;
                goto bail;
        }
        dd = pd->port_dd;

        /*
         * This is the ipath_do_user_init() code, mapping the shared buffers
         * into the user process. The address referred to by vm_pgoff is the
         * file offset passed via mmap().  For shared ports, this is the
         * kernel vmalloc() address of the pages to share with the master.
         * For non-shared or master ports, this is a physical address.
         * We only do one mmap for each space mapped.
         */
        pgaddr = vma->vm_pgoff << PAGE_SHIFT;

        /*
         * Check for 0 in case one of the allocations failed, but user
         * called mmap anyway.
         */
        if (!pgaddr)  {
                ret = -EINVAL;
                goto bail;
        }

        ipath_cdbg(MM, "pgaddr %llx vm_start=%lx len %lx port %u:%u:%u\n",
                   (unsigned long long) pgaddr, vma->vm_start,
                   vma->vm_end - vma->vm_start, dd->ipath_unit,
                   pd->port_port, subport_fp(fp));

        /*
         * Physical addresses must fit in 40 bits for our hardware.
         * Check for kernel virtual addresses first, anything else must
         * match a HW or memory address.
         */
        ret = mmap_kvaddr(vma, pgaddr, pd, subport_fp(fp));
        if (ret) {
                if (ret > 0)
                        ret = 0;
                goto bail;
        }

        ureg = dd->ipath_uregbase + dd->ipath_ureg_align * pd->port_port;
        if (!pd->port_subport_cnt) {
                /* port is not shared */
                piocnt = pd->port_piocnt;
                piobufs = pd->port_piobufs;
        } else if (!subport_fp(fp)) {
                /* caller is the master */
                piocnt = (pd->port_piocnt / pd->port_subport_cnt) +
                         (pd->port_piocnt % pd->port_subport_cnt);
                piobufs = pd->port_piobufs +
                        dd->ipath_palign * (pd->port_piocnt - piocnt);
        } else {
                unsigned slave = subport_fp(fp) - 1;

                /* caller is a slave */
                piocnt = pd->port_piocnt / pd->port_subport_cnt;
                piobufs = pd->port_piobufs + dd->ipath_palign * piocnt * slave;
        }

        if (pgaddr == ureg)
                ret = mmap_ureg(vma, dd, ureg);
        else if (pgaddr == piobufs)
                ret = mmap_piobufs(vma, dd, pd, piobufs, piocnt);
        else if (pgaddr == dd->ipath_pioavailregs_phys)
                /* in-memory copy of pioavail registers */
                ret = ipath_mmap_mem(vma, pd, PAGE_SIZE, 0,
                                     (void *) dd->ipath_pioavailregs_dma,
                                     "pioavail registers");
        else if (pgaddr == pd->port_rcvegr_phys)
                ret = mmap_rcvegrbufs(vma, pd);
        else if (pgaddr == (u64) pd->port_rcvhdrq_phys)
                /*
                 * The rcvhdrq itself; readonly except on HT (so have
                 * to allow writable mapping), multiple pages, contiguous
                 * from an i/o perspective.
                 */
                ret = ipath_mmap_mem(vma, pd, pd->port_rcvhdrq_size, 1,
                                     pd->port_rcvhdrq,
                                     "rcvhdrq");
        else if (pgaddr == (u64) pd->port_rcvhdrqtailaddr_phys)
                /* in-memory copy of rcvhdrq tail register */
                ret = ipath_mmap_mem(vma, pd, PAGE_SIZE, 0,
                                     pd->port_rcvhdrtail_kvaddr,
                                     "rcvhdrq tail");
        else
                ret = -EINVAL;

        vma->vm_private_data = NULL;

        if (ret < 0)
                dev_info(&dd->pcidev->dev,
                         "Failure %d on off %llx len %lx\n",
                         -ret, (unsigned long long)pgaddr,
                         vma->vm_end - vma->vm_start);
bail:
        return ret;
}

static unsigned ipath_poll_hdrqfull(struct ipath_portdata *pd)
{
        unsigned pollflag = 0;

        if ((pd->poll_type & IPATH_POLL_TYPE_OVERFLOW) &&
            pd->port_hdrqfull != pd->port_hdrqfull_poll) {
                pollflag |= POLLIN | POLLRDNORM;
                pd->port_hdrqfull_poll = pd->port_hdrqfull;
        }

        return pollflag;
}

static unsigned int ipath_poll_urgent(struct ipath_portdata *pd,
                                      struct file *fp,
                                      struct poll_table_struct *pt)
{
        unsigned pollflag = 0;
        struct ipath_devdata *dd;

        dd = pd->port_dd;

        /* variable access in ipath_poll_hdrqfull() needs this */
        rmb();
        pollflag = ipath_poll_hdrqfull(pd);

        if (pd->port_urgent != pd->port_urgent_poll) {
                pollflag |= POLLIN | POLLRDNORM;
                pd->port_urgent_poll = pd->port_urgent;
        }

        if (!pollflag) {
                /* this saves a spin_lock/unlock in interrupt handler... */
                set_bit(IPATH_PORT_WAITING_URG, &pd->port_flag);
                /* flush waiting flag so don't miss an event... */
                wmb();
                poll_wait(fp, &pd->port_wait, pt);
        }

        return pollflag;
}

static unsigned int ipath_poll_next(struct ipath_portdata *pd,
                                    struct file *fp,
                                    struct poll_table_struct *pt)
{
        u32 head;
        u32 tail;
        unsigned pollflag = 0;
        struct ipath_devdata *dd;

        dd = pd->port_dd;

        /* variable access in ipath_poll_hdrqfull() needs this */
        rmb();
        pollflag = ipath_poll_hdrqfull(pd);

        head = ipath_read_ureg32(dd, ur_rcvhdrhead, pd->port_port);
        if (pd->port_rcvhdrtail_kvaddr)
                tail = ipath_get_rcvhdrtail(pd);
        else
                tail = ipath_read_ureg32(dd, ur_rcvhdrtail, pd->port_port);

        if (head != tail)
                pollflag |= POLLIN | POLLRDNORM;
        else {
                /* this saves a spin_lock/unlock in interrupt handler */
                set_bit(IPATH_PORT_WAITING_RCV, &pd->port_flag);
                /* flush waiting flag so we don't miss an event */
                wmb();

                set_bit(pd->port_port + dd->ipath_r_intravail_shift,
                        &dd->ipath_rcvctrl);

                ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
                                 dd->ipath_rcvctrl);

                if (dd->ipath_rhdrhead_intr_off) /* arm rcv interrupt */
                        ipath_write_ureg(dd, ur_rcvhdrhead,
                                         dd->ipath_rhdrhead_intr_off | head,
                                         pd->port_port);

                poll_wait(fp, &pd->port_wait, pt);
        }

        return pollflag;
}

static unsigned int ipath_poll(struct file *fp,
                               struct poll_table_struct *pt)
{
        struct ipath_portdata *pd;
        unsigned pollflag;

        pd = port_fp(fp);
        if (!pd)
                pollflag = 0;
        else if (pd->poll_type & IPATH_POLL_TYPE_URGENT)
                pollflag = ipath_poll_urgent(pd, fp, pt);
        else
                pollflag = ipath_poll_next(pd, fp, pt);

        return pollflag;
}

static int ipath_supports_subports(int user_swmajor, int user_swminor)
{
        /* no subport implementation prior to software version 1.3 */
        return (user_swmajor > 1) || (user_swminor >= 3);
}

static int ipath_compatible_subports(int user_swmajor, int user_swminor)
{
        /* this code is written long-hand for clarity */
        if (IPATH_USER_SWMAJOR != user_swmajor) {
                /* no promise of compatibility if major mismatch */
                return 0;
        }
        if (IPATH_USER_SWMAJOR == 1) {
                switch (IPATH_USER_SWMINOR) {
                case 0:
                case 1:
                case 2:
                        /* no subport implementation so cannot be compatible */
                        return 0;
                case 3:
                        /* 3 is only compatible with itself */
                        return user_swminor == 3;
                default:
                        /* >= 4 are compatible (or are expected to be) */
                        return user_swminor >= 4;
                }
        }
        /* make no promises yet for future major versions */
        return 0;
}

static int init_subports(struct ipath_devdata *dd,
                         struct ipath_portdata *pd,
                         const struct ipath_user_info *uinfo)
{
        int ret = 0;
        unsigned num_subports;
        size_t size;

        /*
         * If the user is requesting zero subports,
         * skip the subport allocation.
         */
        if (uinfo->spu_subport_cnt <= 0)
                goto bail;

        /* Self-consistency check for ipath_compatible_subports() */
        if (ipath_supports_subports(IPATH_USER_SWMAJOR, IPATH_USER_SWMINOR) &&
            !ipath_compatible_subports(IPATH_USER_SWMAJOR,
                                       IPATH_USER_SWMINOR)) {
                dev_info(&dd->pcidev->dev,
                         "Inconsistent ipath_compatible_subports()\n");
                goto bail;
        }

        /* Check for subport compatibility */
        if (!ipath_compatible_subports(uinfo->spu_userversion >> 16,
                                       uinfo->spu_userversion & 0xffff)) {
                dev_info(&dd->pcidev->dev,
                         "Mismatched user version (%d.%d) and driver "
                         "version (%d.%d) while port sharing. Ensure "
                         "that driver and library are from the same "
                         "release.\n",
                         (int) (uinfo->spu_userversion >> 16),
                         (int) (uinfo->spu_userversion & 0xffff),
                         IPATH_USER_SWMAJOR,
                         IPATH_USER_SWMINOR);
                goto bail;
        }
        if (uinfo->spu_subport_cnt > INFINIPATH_MAX_SUBPORT) {
                ret = -EINVAL;
                goto bail;
        }

        num_subports = uinfo->spu_subport_cnt;
        pd->subport_uregbase = vmalloc(PAGE_SIZE * num_subports);
        if (!pd->subport_uregbase) {
                ret = -ENOMEM;
                goto bail;
        }
        /* Note: pd->port_rcvhdrq_size isn't initialized yet. */
        size = ALIGN(dd->ipath_rcvhdrcnt * dd->ipath_rcvhdrentsize *
                     sizeof(u32), PAGE_SIZE) * num_subports;
        pd->subport_rcvhdr_base = vmalloc(size);
        if (!pd->subport_rcvhdr_base) {
                ret = -ENOMEM;
                goto bail_ureg;
        }

        pd->subport_rcvegrbuf = vmalloc(pd->port_rcvegrbuf_chunks *
                                        pd->port_rcvegrbuf_size *
                                        num_subports);
        if (!pd->subport_rcvegrbuf) {
                ret = -ENOMEM;
                goto bail_rhdr;
        }

        pd->port_subport_cnt = uinfo->spu_subport_cnt;
        pd->port_subport_id = uinfo->spu_subport_id;
        pd->active_slaves = 1;
        set_bit(IPATH_PORT_MASTER_UNINIT, &pd->port_flag);
        memset(pd->subport_uregbase, 0, PAGE_SIZE * num_subports);
        memset(pd->subport_rcvhdr_base, 0, size);
        memset(pd->subport_rcvegrbuf, 0, pd->port_rcvegrbuf_chunks *
                                         pd->port_rcvegrbuf_size *
                                         num_subports);
        goto bail;

bail_rhdr:
        vfree(pd->subport_rcvhdr_base);
bail_ureg:
        vfree(pd->subport_uregbase);
        pd->subport_uregbase = NULL;
bail:
        return ret;
}

static int try_alloc_port(struct ipath_devdata *dd, int port,
                          struct file *fp,
                          const struct ipath_user_info *uinfo)
{
        struct ipath_portdata *pd;
        int ret;

        if (!(pd = dd->ipath_pd[port])) {
                void *ptmp;

                pd = kzalloc(sizeof(struct ipath_portdata), GFP_KERNEL);

                /*
                 * Allocate memory for use in ipath_tid_update() just once
                 * at open, not per call.  Reduces cost of expected send
                 * setup.
                 */
                ptmp = kmalloc(dd->ipath_rcvtidcnt * sizeof(u16) +
                               dd->ipath_rcvtidcnt * sizeof(struct page **),
                               GFP_KERNEL);
                if (!pd || !ptmp) {
                        ipath_dev_err(dd, "Unable to allocate portdata "
                                      "memory, failing open\n");
                        ret = -ENOMEM;
                        kfree(pd);
                        kfree(ptmp);
                        goto bail;
                }
                dd->ipath_pd[port] = pd;
                dd->ipath_pd[port]->port_port = port;
                dd->ipath_pd[port]->port_dd = dd;
                dd->ipath_pd[port]->port_tid_pg_list = ptmp;
                init_waitqueue_head(&dd->ipath_pd[port]->port_wait);
        }
        if (!pd->port_cnt) {
                pd->userversion = uinfo->spu_userversion;
                init_user_egr_sizes(pd);
                if ((ret = init_subports(dd, pd, uinfo)) != 0)
                        goto bail;
                ipath_cdbg(PROC, "%s[%u] opened unit:port %u:%u\n",
                           current->comm, current->pid, dd->ipath_unit,
                           port);
                pd->port_cnt = 1;
                port_fp(fp) = pd;
                pd->port_pid = get_pid(task_pid(current));
                strlcpy(pd->port_comm, current->comm, sizeof(pd->port_comm));
                ipath_stats.sps_ports++;
                ret = 0;
        } else
                ret = -EBUSY;

bail:
        return ret;
}

static inline int usable(struct ipath_devdata *dd)
{
        return dd &&
                (dd->ipath_flags & IPATH_PRESENT) &&
                dd->ipath_kregbase &&
                dd->ipath_lid &&
                !(dd->ipath_flags & (IPATH_LINKDOWN | IPATH_DISABLED
                                     | IPATH_LINKUNK));
}

static int find_free_port(int unit, struct file *fp,
                          const struct ipath_user_info *uinfo)
{
        struct ipath_devdata *dd = ipath_lookup(unit);
        int ret, i;

        if (!dd) {
                ret = -ENODEV;
                goto bail;
        }

        if (!usable(dd)) {
                ret = -ENETDOWN;
                goto bail;
        }

        for (i = 1; i < dd->ipath_cfgports; i++) {
                ret = try_alloc_port(dd, i, fp, uinfo);
                if (ret != -EBUSY)
                        goto bail;
        }
        ret = -EBUSY;

bail:
        return ret;
}

static int find_best_unit(struct file *fp,
                          const struct ipath_user_info *uinfo)
{
        int ret = 0, i, prefunit = -1, devmax;
        int maxofallports, npresent, nup;
        int ndev;

        devmax = ipath_count_units(&npresent, &nup, &maxofallports);

        /*
         * This code is present to allow a knowledgeable person to
         * specify the layout of processes to processors before opening
         * this driver, and then we'll assign the process to the "closest"
         * InfiniPath chip to that processor (we assume reasonable connectivity,
         * for now).  This code assumes that if affinity has been set
         * before this point, that at most one cpu is set; for now this
         * is reasonable.  I check for both cpumask_empty() and cpumask_full(),
         * in case some kernel variant sets none of the bits when no
         * affinity is set.  2.6.11 and 12 kernels have all present
         * cpus set.  Some day we'll have to fix it up further to handle
         * a cpu subset.  This algorithm fails for two HT chips connected
         * in tunnel fashion.  Eventually this needs real topology
         * information.  There may be some issues with dual core numbering
         * as well.  This needs more work prior to release.
         */
        if (!cpumask_empty(&current->cpus_allowed) &&
            !cpumask_full(&current->cpus_allowed)) {
                int ncpus = num_online_cpus(), curcpu = -1, nset = 0;
                for (i = 0; i < ncpus; i++)
                        if (cpumask_test_cpu(i, &current->cpus_allowed)) {
                                ipath_cdbg(PROC, "%s[%u] affinity set for "
                                           "cpu %d/%d\n", current->comm,
                                           current->pid, i, ncpus);
                                curcpu = i;
                                nset++;
                        }
                if (curcpu != -1 && nset != ncpus) {
                        if (npresent) {
                                prefunit = curcpu / (ncpus / npresent);
                                ipath_cdbg(PROC,"%s[%u] %d chips, %d cpus, "
                                          "%d cpus/chip, select unit %d\n",
                                          current->comm, current->pid,
                                          npresent, ncpus, ncpus / npresent,
                                          prefunit);
                        }
                }
        }

        /*
         * user ports start at 1, kernel port is 0
         * For now, we do round-robin access across all chips
         */

        if (prefunit != -1)
                devmax = prefunit + 1;
recheck:
        for (i = 1; i < maxofallports; i++) {
                for (ndev = prefunit != -1 ? prefunit : 0; ndev < devmax;
                     ndev++) {
                        struct ipath_devdata *dd = ipath_lookup(ndev);

                        if (!usable(dd))
                                continue; /* can't use this unit */
                        if (i >= dd->ipath_cfgports)
                                /*
                                 * Maxed out on users of this unit. Try
                                 * next.
                                 */
                                continue;
                        ret = try_alloc_port(dd, i, fp, uinfo);
                        if (!ret)
                                goto done;
                }
        }

        if (npresent) {
                if (nup == 0) {
                        ret = -ENETDOWN;
                        ipath_dbg("No ports available (none initialized "
                                  "and ready)\n");
                } else {
                        if (prefunit > 0) {
                                /* if started above 0, retry from 0 */
                                ipath_cdbg(PROC,
                                           "%s[%u] no ports on prefunit "
                                           "%d, clear and re-check\n",
                                           current->comm, current->pid,
                                           prefunit);
                                devmax = ipath_count_units(NULL, NULL,
                                                           NULL);
                                prefunit = -1;
                                goto recheck;
                        }
                        ret = -EBUSY;
                        ipath_dbg("No ports available\n");
                }
        } else {
                ret = -ENXIO;
                ipath_dbg("No boards found\n");
        }

done:
        return ret;
}

static int find_shared_port(struct file *fp,
                            const struct ipath_user_info *uinfo)
{
        int devmax, ndev, i;
        int ret = 0;

        devmax = ipath_count_units(NULL, NULL, NULL);

        for (ndev = 0; ndev < devmax; ndev++) {
                struct ipath_devdata *dd = ipath_lookup(ndev);

                if (!usable(dd))
                        continue;
                for (i = 1; i < dd->ipath_cfgports; i++) {
                        struct ipath_portdata *pd = dd->ipath_pd[i];

                        /* Skip ports which are not yet open */
                        if (!pd || !pd->port_cnt)
                                continue;
                        /* Skip port if it doesn't match the requested one */
                        if (pd->port_subport_id != uinfo->spu_subport_id)
                                continue;
                        /* Verify the sharing process matches the master */
                        if (pd->port_subport_cnt != uinfo->spu_subport_cnt ||
                            pd->userversion != uinfo->spu_userversion ||
                            pd->port_cnt >= pd->port_subport_cnt) {
                                ret = -EINVAL;
                                goto done;
                        }
                        port_fp(fp) = pd;
                        subport_fp(fp) = pd->port_cnt++;
                        pd->port_subpid[subport_fp(fp)] =
                                get_pid(task_pid(current));
                        tidcursor_fp(fp) = 0;
                        pd->active_slaves |= 1 << subport_fp(fp);
                        ipath_cdbg(PROC,
                                   "%s[%u] %u sharing %s[%u] unit:port %u:%u\n",
                                   current->comm, current->pid,
                                   subport_fp(fp),
                                   pd->port_comm, pid_nr(pd->port_pid),
                                   dd->ipath_unit, pd->port_port);
                        ret = 1;
                        goto done;
                }
        }

done:
        return ret;
}

static int ipath_open(struct inode *in, struct file *fp)
{
        /* The real work is performed later in ipath_assign_port() */
        cycle_kernel_lock();
        fp->private_data = kzalloc(sizeof(struct ipath_filedata), GFP_KERNEL);
        return fp->private_data ? 0 : -ENOMEM;
}

/* Get port early, so can set affinity prior to memory allocation */
static int ipath_assign_port(struct file *fp,
                              const struct ipath_user_info *uinfo)
{
        int ret;
        int i_minor;
        unsigned swmajor, swminor;

        /* Check to be sure we haven't already initialized this file */
        if (port_fp(fp)) {
                ret = -EINVAL;
                goto done;
        }

        /* for now, if major version is different, bail */
        swmajor = uinfo->spu_userversion >> 16;
        if (swmajor != IPATH_USER_SWMAJOR) {
                ipath_dbg("User major version %d not same as driver "
                          "major %d\n", uinfo->spu_userversion >> 16,
                          IPATH_USER_SWMAJOR);
                ret = -ENODEV;
                goto done;
        }

        swminor = uinfo->spu_userversion & 0xffff;
        if (swminor != IPATH_USER_SWMINOR)
                ipath_dbg("User minor version %d not same as driver "
                          "minor %d\n", swminor, IPATH_USER_SWMINOR);

        mutex_lock(&ipath_mutex);

        if (ipath_compatible_subports(swmajor, swminor) &&
            uinfo->spu_subport_cnt &&
            (ret = find_shared_port(fp, uinfo))) {
                if (ret > 0)
                        ret = 0;
                goto done_chk_sdma;
        }

        i_minor = iminor(fp->f_path.dentry->d_inode) - IPATH_USER_MINOR_BASE;
        ipath_cdbg(VERBOSE, "open on dev %lx (minor %d)\n",
                   (long)fp->f_path.dentry->d_inode->i_rdev, i_minor);

        if (i_minor)
                ret = find_free_port(i_minor - 1, fp, uinfo);
        else
                ret = find_best_unit(fp, uinfo);

done_chk_sdma:
        if (!ret) {
                struct ipath_filedata *fd = fp->private_data;
                const struct ipath_portdata *pd = fd->pd;
                const struct ipath_devdata *dd = pd->port_dd;

                fd->pq = ipath_user_sdma_queue_create(&dd->pcidev->dev,
                                                      dd->ipath_unit,
                                                      pd->port_port,
                                                      fd->subport);

                if (!fd->pq)
                        ret = -ENOMEM;
        }

        mutex_unlock(&ipath_mutex);

done:
        return ret;
}


static int ipath_do_user_init(struct file *fp,
                              const struct ipath_user_info *uinfo)
{
        int ret;
        struct ipath_portdata *pd = port_fp(fp);
        struct ipath_devdata *dd;
        u32 head32;

        /* Subports don't need to initialize anything since master did it. */
        if (subport_fp(fp)) {
                ret = wait_event_interruptible(pd->port_wait,
                        !test_bit(IPATH_PORT_MASTER_UNINIT, &pd->port_flag));
                goto done;
        }

        dd = pd->port_dd;

        if (uinfo->spu_rcvhdrsize) {
                ret = ipath_setrcvhdrsize(dd, uinfo->spu_rcvhdrsize);
                if (ret)
                        goto done;
        }

        /* for now we do nothing with rcvhdrcnt: uinfo->spu_rcvhdrcnt */

        /* some ports may get extra buffers, calculate that here */
        if (pd->port_port <= dd->ipath_ports_extrabuf)
                pd->port_piocnt = dd->ipath_pbufsport + 1;
        else
                pd->port_piocnt = dd->ipath_pbufsport;

        /* for right now, kernel piobufs are at end, so port 1 is at 0 */
        if (pd->port_port <= dd->ipath_ports_extrabuf)
                pd->port_pio_base = (dd->ipath_pbufsport + 1)
                        * (pd->port_port - 1);
        else
                pd->port_pio_base = dd->ipath_ports_extrabuf +
                        dd->ipath_pbufsport * (pd->port_port - 1);
        pd->port_piobufs = dd->ipath_piobufbase +
                pd->port_pio_base * dd->ipath_palign;
        ipath_cdbg(VERBOSE, "piobuf base for port %u is 0x%x, piocnt %u,"
                " first pio %u\n", pd->port_port, pd->port_piobufs,
                pd->port_piocnt, pd->port_pio_base);
        ipath_chg_pioavailkernel(dd, pd->port_pio_base, pd->port_piocnt, 0);

        /*
         * Now allocate the rcvhdr Q and eager TIDs; skip the TID
         * array for time being.  If pd->port_port > chip-supported,
         * we need to do extra stuff here to handle by handling overflow
         * through port 0, someday
         */
        ret = ipath_create_rcvhdrq(dd, pd);
        if (!ret)
                ret = ipath_create_user_egr(pd);
        if (ret)
                goto done;

        /*
         * set the eager head register for this port to the current values
         * of the tail pointers, since we don't know if they were
         * updated on last use of the port.
         */
        head32 = ipath_read_ureg32(dd, ur_rcvegrindextail, pd->port_port);
        ipath_write_ureg(dd, ur_rcvegrindexhead, head32, pd->port_port);
        pd->port_lastrcvhdrqtail = -1;
        ipath_cdbg(VERBOSE, "Wrote port%d egrhead %x from tail regs\n",
                pd->port_port, head32);
        pd->port_tidcursor = 0; /* start at beginning after open */

        /* initialize poll variables... */
        pd->port_urgent = 0;
        pd->port_urgent_poll = 0;
        pd->port_hdrqfull_poll = pd->port_hdrqfull;

        /*
         * Now enable the port for receive.
         * For chips that are set to DMA the tail register to memory
         * when they change (and when the update bit transitions from
         * 0 to 1.  So for those chips, we turn it off and then back on.
         * This will (very briefly) affect any other open ports, but the
         * duration is very short, and therefore isn't an issue.  We
         * explictly set the in-memory tail copy to 0 beforehand, so we
         * don't have to wait to be sure the DMA update has happened
         * (chip resets head/tail to 0 on transition to enable).
         */
        set_bit(dd->ipath_r_portenable_shift + pd->port_port,
                &dd->ipath_rcvctrl);
        if (!(dd->ipath_flags & IPATH_NODMA_RTAIL)) {
                if (pd->port_rcvhdrtail_kvaddr)
                        ipath_clear_rcvhdrtail(pd);
                ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
                        dd->ipath_rcvctrl &
                        ~(1ULL << dd->ipath_r_tailupd_shift));
        }
        ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
                         dd->ipath_rcvctrl);
        /* Notify any waiting slaves */
        if (pd->port_subport_cnt) {
                clear_bit(IPATH_PORT_MASTER_UNINIT, &pd->port_flag);
                wake_up(&pd->port_wait);
        }
done:
        return ret;
}

/**
 * unlock_exptid - unlock any expected TID entries port still had in use
 * @pd: port
 *
 * We don't actually update the chip here, because we do a bulk update
 * below, using ipath_f_clear_tids.
 */
static void unlock_expected_tids(struct ipath_portdata *pd)
{
        struct ipath_devdata *dd = pd->port_dd;
        int port_tidbase = pd->port_port * dd->ipath_rcvtidcnt;
        int i, cnt = 0, maxtid = port_tidbase + dd->ipath_rcvtidcnt;

        ipath_cdbg(VERBOSE, "Port %u unlocking any locked expTID pages\n",
                   pd->port_port);
        for (i = port_tidbase; i < maxtid; i++) {
                struct page *ps = dd->ipath_pageshadow[i];

                if (!ps)
                        continue;

                dd->ipath_pageshadow[i] = NULL;
                pci_unmap_page(dd->pcidev, dd->ipath_physshadow[i],
                        PAGE_SIZE, PCI_DMA_FROMDEVICE);
                ipath_release_user_pages_on_close(&ps, 1);
                cnt++;
                ipath_stats.sps_pageunlocks++;
        }
        if (cnt)
                ipath_cdbg(VERBOSE, "Port %u locked %u expTID entries\n",
                           pd->port_port, cnt);

        if (ipath_stats.sps_pagelocks || ipath_stats.sps_pageunlocks)
                ipath_cdbg(VERBOSE, "%llu pages locked, %llu unlocked\n",
                           (unsigned long long) ipath_stats.sps_pagelocks,
                           (unsigned long long)
                           ipath_stats.sps_pageunlocks);
}

static int ipath_close(struct inode *in, struct file *fp)
{
        int ret = 0;
        struct ipath_filedata *fd;
        struct ipath_portdata *pd;
        struct ipath_devdata *dd;
        unsigned long flags;
        unsigned port;
        struct pid *pid;

        ipath_cdbg(VERBOSE, "close on dev %lx, private data %p\n",
                   (long)in->i_rdev, fp->private_data);

        mutex_lock(&ipath_mutex);

        fd = (struct ipath_filedata *) fp->private_data;
        fp->private_data = NULL;
        pd = fd->pd;
        if (!pd) {
                mutex_unlock(&ipath_mutex);
                goto bail;
        }

        dd = pd->port_dd;

        /* drain user sdma queue */
        ipath_user_sdma_queue_drain(dd, fd->pq);
        ipath_user_sdma_queue_destroy(fd->pq);

        if (--pd->port_cnt) {
                /*
                 * XXX If the master closes the port before the slave(s),
                 * revoke the mmap for the eager receive queue so
                 * the slave(s) don't wait for receive data forever.
                 */
                pd->active_slaves &= ~(1 << fd->subport);
                put_pid(pd->port_subpid[fd->subport]);
                pd->port_subpid[fd->subport] = NULL;
                mutex_unlock(&ipath_mutex);
                goto bail;
        }
        /* early; no interrupt users after this */
        spin_lock_irqsave(&dd->ipath_uctxt_lock, flags);
        port = pd->port_port;
        dd->ipath_pd[port] = NULL;
        pid = pd->port_pid;
        pd->port_pid = NULL;
        spin_unlock_irqrestore(&dd->ipath_uctxt_lock, flags);

        if (pd->port_rcvwait_to || pd->port_piowait_to
            || pd->port_rcvnowait || pd->port_pionowait) {
                ipath_cdbg(VERBOSE, "port%u, %u rcv, %u pio wait timeo; "
                           "%u rcv %u, pio already\n",
                           pd->port_port, pd->port_rcvwait_to,
                           pd->port_piowait_to, pd->port_rcvnowait,
                           pd->port_pionowait);
                pd->port_rcvwait_to = pd->port_piowait_to =
                        pd->port_rcvnowait = pd->port_pionowait = 0;
        }
        if (pd->port_flag) {
                ipath_cdbg(PROC, "port %u port_flag set: 0x%lx\n",
                          pd->port_port, pd->port_flag);
                pd->port_flag = 0;
        }

        if (dd->ipath_kregbase) {
                /* atomically clear receive enable port and intr avail. */
                clear_bit(dd->ipath_r_portenable_shift + port,
                          &dd->ipath_rcvctrl);
                clear_bit(pd->port_port + dd->ipath_r_intravail_shift,
                          &dd->ipath_rcvctrl);
                ipath_write_kreg( dd, dd->ipath_kregs->kr_rcvctrl,
                        dd->ipath_rcvctrl);
                /* and read back from chip to be sure that nothing
                 * else is in flight when we do the rest */
                (void)ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);

                /* clean up the pkeys for this port user */
                ipath_clean_part_key(pd, dd);
                /*
                 * be paranoid, and never write 0's to these, just use an
                 * unused part of the port 0 tail page.  Of course,
                 * rcvhdraddr points to a large chunk of memory, so this
                 * could still trash things, but at least it won't trash
                 * page 0, and by disabling the port, it should stop "soon",
                 * even if a packet or two is in already in flight after we
                 * disabled the port.
                 */
                ipath_write_kreg_port(dd,
                        dd->ipath_kregs->kr_rcvhdrtailaddr, port,
                        dd->ipath_dummy_hdrq_phys);
                ipath_write_kreg_port(dd, dd->ipath_kregs->kr_rcvhdraddr,
                        pd->port_port, dd->ipath_dummy_hdrq_phys);

                ipath_disarm_piobufs(dd, pd->port_pio_base, pd->port_piocnt);
                ipath_chg_pioavailkernel(dd, pd->port_pio_base,
                        pd->port_piocnt, 1);

                dd->ipath_f_clear_tids(dd, pd->port_port);

                if (dd->ipath_pageshadow)
                        unlock_expected_tids(pd);
                ipath_stats.sps_ports--;
                ipath_cdbg(PROC, "%s[%u] closed port %u:%u\n",
                           pd->port_comm, pid_nr(pid),
                           dd->ipath_unit, port);
        }

        put_pid(pid);
        mutex_unlock(&ipath_mutex);
        ipath_free_pddata(dd, pd); /* after releasing the mutex */

bail:
        kfree(fd);
        return ret;
}

static int ipath_port_info(struct ipath_portdata *pd, u16 subport,
                           struct ipath_port_info __user *uinfo)
{
        struct ipath_port_info info;
        int nup;
        int ret;
        size_t sz;

        (void) ipath_count_units(NULL, &nup, NULL);
        info.num_active = nup;
        info.unit = pd->port_dd->ipath_unit;
        info.port = pd->port_port;
        info.subport = subport;
        /* Don't return new fields if old library opened the port. */
        if (ipath_supports_subports(pd->userversion >> 16,
                                    pd->userversion & 0xffff)) {
                /* Number of user ports available for this device. */
                info.num_ports = pd->port_dd->ipath_cfgports - 1;
                info.num_subports = pd->port_subport_cnt;
                sz = sizeof(info);
        } else
                sz = sizeof(info) - 2 * sizeof(u16);

        if (copy_to_user(uinfo, &info, sz)) {
                ret = -EFAULT;
                goto bail;
        }
        ret = 0;

bail:
        return ret;
}

static int ipath_get_slave_info(struct ipath_portdata *pd,
                                void __user *slave_mask_addr)
{
        int ret = 0;

        if (copy_to_user(slave_mask_addr, &pd->active_slaves, sizeof(u32)))
                ret = -EFAULT;
        return ret;
}

static int ipath_sdma_get_inflight(struct ipath_user_sdma_queue *pq,
                                   u32 __user *inflightp)
{
        const u32 val = ipath_user_sdma_inflight_counter(pq);

        if (put_user(val, inflightp))
                return -EFAULT;

        return 0;
}

static int ipath_sdma_get_complete(struct ipath_devdata *dd,
                                   struct ipath_user_sdma_queue *pq,
                                   u32 __user *completep)
{
        u32 val;
        int err;

        err = ipath_user_sdma_make_progress(dd, pq);
        if (err < 0)
                return err;

        val = ipath_user_sdma_complete_counter(pq);
        if (put_user(val, completep))
                return -EFAULT;

        return 0;
}

static ssize_t ipath_write(struct file *fp, const char __user *data,
                           size_t count, loff_t *off)
{
        const struct ipath_cmd __user *ucmd;
        struct ipath_portdata *pd;
        const void __user *src;
        size_t consumed, copy;
        struct ipath_cmd cmd;
        ssize_t ret = 0;
        void *dest;

        if (count < sizeof(cmd.type)) {
                ret = -EINVAL;
                goto bail;
        }

        ucmd = (const struct ipath_cmd __user *) data;

        if (copy_from_user(&cmd.type, &ucmd->type, sizeof(cmd.type))) {
                ret = -EFAULT;
                goto bail;
        }

        consumed = sizeof(cmd.type);

        switch (cmd.type) {
        case IPATH_CMD_ASSIGN_PORT:
        case __IPATH_CMD_USER_INIT:
        case IPATH_CMD_USER_INIT:
                copy = sizeof(cmd.cmd.user_info);
                dest = &cmd.cmd.user_info;
                src = &ucmd->cmd.user_info;
                break;
        case IPATH_CMD_RECV_CTRL:
                copy = sizeof(cmd.cmd.recv_ctrl);
                dest = &cmd.cmd.recv_ctrl;
                src = &ucmd->cmd.recv_ctrl;
                break;
        case IPATH_CMD_PORT_INFO:
                copy = sizeof(cmd.cmd.port_info);
                dest = &cmd.cmd.port_info;
                src = &ucmd->cmd.port_info;
                break;
        case IPATH_CMD_TID_UPDATE:
        case IPATH_CMD_TID_FREE:
                copy = sizeof(cmd.cmd.tid_info);
                dest = &cmd.cmd.tid_info;
                src = &ucmd->cmd.tid_info;
                break;
        case IPATH_CMD_SET_PART_KEY:
                copy = sizeof(cmd.cmd.part_key);
                dest = &cmd.cmd.part_key;
                src = &ucmd->cmd.part_key;
                break;
        case __IPATH_CMD_SLAVE_INFO:
                copy = sizeof(cmd.cmd.slave_mask_addr);
                dest = &cmd.cmd.slave_mask_addr;
                src = &ucmd->cmd.slave_mask_addr;
                break;
        case IPATH_CMD_PIOAVAILUPD:     // force an update of PIOAvail reg
                copy = 0;
                src = NULL;
                dest = NULL;
                break;
        case IPATH_CMD_POLL_TYPE:
                copy = sizeof(cmd.cmd.poll_type);
                dest = &cmd.cmd.poll_type;
                src = &ucmd->cmd.poll_type;
                break;
        case IPATH_CMD_ARMLAUNCH_CTRL:
                copy = sizeof(cmd.cmd.armlaunch_ctrl);
                dest = &cmd.cmd.armlaunch_ctrl;
                src = &ucmd->cmd.armlaunch_ctrl;
                break;
        case IPATH_CMD_SDMA_INFLIGHT:
                copy = sizeof(cmd.cmd.sdma_inflight);
                dest = &cmd.cmd.sdma_inflight;
                src = &ucmd->cmd.sdma_inflight;
                break;
        case IPATH_CMD_SDMA_COMPLETE:
                copy = sizeof(cmd.cmd.sdma_complete);
                dest = &cmd.cmd.sdma_complete;
                src = &ucmd->cmd.sdma_complete;
                break;
        default:
                ret = -EINVAL;
                goto bail;
        }

        if (copy) {
                if ((count - consumed) < copy) {
                        ret = -EINVAL;
                        goto bail;
                }

                if (copy_from_user(dest, src, copy)) {
                        ret = -EFAULT;
                        goto bail;
                }

                consumed += copy;
        }

        pd = port_fp(fp);
        if (!pd && cmd.type != __IPATH_CMD_USER_INIT &&
                cmd.type != IPATH_CMD_ASSIGN_PORT) {
                ret = -EINVAL;
                goto bail;
        }

        switch (cmd.type) {
        case IPATH_CMD_ASSIGN_PORT:
                ret = ipath_assign_port(fp, &cmd.cmd.user_info);
                if (ret)
                        goto bail;
                break;
        case __IPATH_CMD_USER_INIT:
                /* backwards compatibility, get port first */
                ret = ipath_assign_port(fp, &cmd.cmd.user_info);
                if (ret)
                        goto bail;
                /* and fall through to current version. */
        case IPATH_CMD_USER_INIT:
                ret = ipath_do_user_init(fp, &cmd.cmd.user_info);
                if (ret)
                        goto bail;
                ret = ipath_get_base_info(
                        fp, (void __user *) (unsigned long)
                        cmd.cmd.user_info.spu_base_info,
                        cmd.cmd.user_info.spu_base_info_size);
                break;
        case IPATH_CMD_RECV_CTRL:
                ret = ipath_manage_rcvq(pd, subport_fp(fp), cmd.cmd.recv_ctrl);
                break;
        case IPATH_CMD_PORT_INFO:
                ret = ipath_port_info(pd, subport_fp(fp),
                                      (struct ipath_port_info __user *)
                                      (unsigned long) cmd.cmd.port_info);
                break;
        case IPATH_CMD_TID_UPDATE:
                ret = ipath_tid_update(pd, fp, &cmd.cmd.tid_info);
                break;
        case IPATH_CMD_TID_FREE:
                ret = ipath_tid_free(pd, subport_fp(fp), &cmd.cmd.tid_info);
                break;
        case IPATH_CMD_SET_PART_KEY:
                ret = ipath_set_part_key(pd, cmd.cmd.part_key);
                break;
        case __IPATH_CMD_SLAVE_INFO:
                ret = ipath_get_slave_info(pd,
                                           (void __user *) (unsigned long)
                                           cmd.cmd.slave_mask_addr);
                break;
        case IPATH_CMD_PIOAVAILUPD:
                ipath_force_pio_avail_update(pd->port_dd);
                break;
        case IPATH_CMD_POLL_TYPE:
                pd->poll_type = cmd.cmd.poll_type;
                break;
        case IPATH_CMD_ARMLAUNCH_CTRL:
                if (cmd.cmd.armlaunch_ctrl)
                        ipath_enable_armlaunch(pd->port_dd);
                else
                        ipath_disable_armlaunch(pd->port_dd);
                break;
        case IPATH_CMD_SDMA_INFLIGHT:
                ret = ipath_sdma_get_inflight(user_sdma_queue_fp(fp),
                                              (u32 __user *) (unsigned long)
                                              cmd.cmd.sdma_inflight);
                break;
        case IPATH_CMD_SDMA_COMPLETE:
                ret = ipath_sdma_get_complete(pd->port_dd,
                                              user_sdma_queue_fp(fp),
                                              (u32 __user *) (unsigned long)
                                              cmd.cmd.sdma_complete);
                break;
        }

        if (ret >= 0)
                ret = consumed;

bail:
        return ret;
}

static ssize_t ipath_writev(struct kiocb *iocb, const struct iovec *iov,
                            unsigned long dim, loff_t off)
{
        struct file *filp = iocb->ki_filp;
        struct ipath_filedata *fp = filp->private_data;
        struct ipath_portdata *pd = port_fp(filp);
        struct ipath_user_sdma_queue *pq = fp->pq;

        if (!dim)
                return -EINVAL;

        return ipath_user_sdma_writev(pd->port_dd, pq, iov, dim);
}

static struct class *ipath_class;

static int init_cdev(int minor, char *name, const struct file_operations *fops,
                     struct cdev **cdevp, struct device **devp)
{
        const dev_t dev = MKDEV(IPATH_MAJOR, minor);
        struct cdev *cdev = NULL;
        struct device *device = NULL;
        int ret;

        cdev = cdev_alloc();
        if (!cdev) {
                printk(KERN_ERR IPATH_DRV_NAME
                       ": Could not allocate cdev for minor %d, %s\n",
                       minor, name);
                ret = -ENOMEM;
                goto done;
        }

        cdev->owner = THIS_MODULE;
        cdev->ops = fops;
        kobject_set_name(&cdev->kobj, name);

        ret = cdev_add(cdev, dev, 1);
        if (ret < 0) {
                printk(KERN_ERR IPATH_DRV_NAME
                       ": Could not add cdev for minor %d, %s (err %d)\n",
                       minor, name, -ret);
                goto err_cdev;
        }

        device = device_create(ipath_class, NULL, dev, NULL, name);

        if (IS_ERR(device)) {
                ret = PTR_ERR(device);
                printk(KERN_ERR IPATH_DRV_NAME ": Could not create "
                       "device for minor %d, %s (err %d)\n",
                       minor, name, -ret);
                goto err_cdev;
        }

        goto done;

err_cdev:
        cdev_del(cdev);
        cdev = NULL;

done:
        if (ret >= 0) {
                *cdevp = cdev;
                *devp = device;
        } else {
                *cdevp = NULL;
                *devp = NULL;
        }

        return ret;
}

int ipath_cdev_init(int minor, char *name, const struct file_operations *fops,
                    struct cdev **cdevp, struct device **devp)
{
        return init_cdev(minor, name, fops, cdevp, devp);
}

static void cleanup_cdev(struct cdev **cdevp,
                         struct device **devp)
{
        struct device *dev = *devp;

        if (dev) {
                device_unregister(dev);
                *devp = NULL;
        }

        if (*cdevp) {
                cdev_del(*cdevp);
                *cdevp = NULL;
        }
}

void ipath_cdev_cleanup(struct cdev **cdevp,
                        struct device **devp)
{
        cleanup_cdev(cdevp, devp);
}

static struct cdev *wildcard_cdev;
static struct device *wildcard_dev;

static const dev_t dev = MKDEV(IPATH_MAJOR, 0);

static int user_init(void)
{
        int ret;

        ret = register_chrdev_region(dev, IPATH_NMINORS, IPATH_DRV_NAME);
        if (ret < 0) {
                printk(KERN_ERR IPATH_DRV_NAME ": Could not register "
                       "chrdev region (err %d)\n", -ret);
                goto done;
        }

        ipath_class = class_create(THIS_MODULE, IPATH_DRV_NAME);

        if (IS_ERR(ipath_class)) {
                ret = PTR_ERR(ipath_class);
                printk(KERN_ERR IPATH_DRV_NAME ": Could not create "
                       "device class (err %d)\n", -ret);
                goto bail;
        }

        goto done;
bail:
        unregister_chrdev_region(dev, IPATH_NMINORS);
done:
        return ret;
}

static void user_cleanup(void)
{
        if (ipath_class) {
                class_destroy(ipath_class);
                ipath_class = NULL;
        }

        unregister_chrdev_region(dev, IPATH_NMINORS);
}

static atomic_t user_count = ATOMIC_INIT(0);
static atomic_t user_setup = ATOMIC_INIT(0);

int ipath_user_add(struct ipath_devdata *dd)
{
        char name[10];
        int ret;

        if (atomic_inc_return(&user_count) == 1) {
                ret = user_init();
                if (ret < 0) {
                        ipath_dev_err(dd, "Unable to set up user support: "
                                      "error %d\n", -ret);
                        goto bail;
                }
                ret = init_cdev(0, "ipath", &ipath_file_ops, &wildcard_cdev,
                                &wildcard_dev);
                if (ret < 0) {
                        ipath_dev_err(dd, "Could not create wildcard "
                                      "minor: error %d\n", -ret);
                        goto bail_user;
                }

                atomic_set(&user_setup, 1);
        }

        snprintf(name, sizeof(name), "ipath%d", dd->ipath_unit);

        ret = init_cdev(dd->ipath_unit + 1, name, &ipath_file_ops,
                        &dd->user_cdev, &dd->user_dev);
        if (ret < 0)
                ipath_dev_err(dd, "Could not create user minor %d, %s\n",
                              dd->ipath_unit + 1, name);

        goto bail;

bail_user:
        user_cleanup();
bail:
        return ret;
}

void ipath_user_remove(struct ipath_devdata *dd)
{
        cleanup_cdev(&dd->user_cdev, &dd->user_dev);

        if (atomic_dec_return(&user_count) == 0) {
                if (atomic_read(&user_setup) == 0)
                        goto bail;

                cleanup_cdev(&wildcard_cdev, &wildcard_dev);
                user_cleanup();

                atomic_set(&user_setup, 0);
        }
bail:
        return;
}