1 #ifndef _IPATH_KERNEL_H
2 #define _IPATH_KERNEL_H
4 * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
5 * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
7 * This software is available to you under a choice of one of two
8 * licenses. You may choose to be licensed under the terms of the GNU
9 * General Public License (GPL) Version 2, available from the file
10 * COPYING in the main directory of this source tree, or the
11 * OpenIB.org BSD license below:
13 * Redistribution and use in source and binary forms, with or
14 * without modification, are permitted provided that the following
17 * - Redistributions of source code must retain the above
18 * copyright notice, this list of conditions and the following
21 * - Redistributions in binary form must reproduce the above
22 * copyright notice, this list of conditions and the following
23 * disclaimer in the documentation and/or other materials
24 * provided with the distribution.
26 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
27 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
28 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
29 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
30 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
31 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
32 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
37 * This header file is the base header file for infinipath kernel code
38 * ipath_user.h serves a similar purpose for user code.
41 #include <linux/interrupt.h>
42 #include <linux/pci.h>
43 #include <linux/dma-mapping.h>
44 #include <linux/mutex.h>
45 #include <linux/list.h>
46 #include <linux/scatterlist.h>
48 #include <rdma/ib_verbs.h>
50 #include "ipath_common.h"
51 #include "ipath_debug.h"
52 #include "ipath_registers.h"
54 /* only s/w major version of InfiniPath we can handle */
55 #define IPATH_CHIP_VERS_MAJ 2U
57 /* don't care about this except printing */
58 #define IPATH_CHIP_VERS_MIN 0U
60 /* temporary, maybe always */
61 extern struct infinipath_stats ipath_stats
;
63 #define IPATH_CHIP_SWVERSION IPATH_CHIP_VERS_MAJ
65 * First-cut critierion for "device is active" is
66 * two thousand dwords combined Tx, Rx traffic per
67 * 5-second interval. SMA packets are 64 dwords,
68 * and occur "a few per second", presumably each way.
70 #define IPATH_TRAFFIC_ACTIVE_THRESHOLD (2000)
72 * Struct used to indicate which errors are logged in each of the
73 * error-counters that are logged to EEPROM. A counter is incremented
74 * _once_ (saturating at 255) for each event with any bits set in
75 * the error or hwerror register masks below.
77 #define IPATH_EEP_LOG_CNT (4)
78 struct ipath_eep_log_mask
{
83 struct ipath_portdata
{
84 void **port_rcvegrbuf
;
85 dma_addr_t
*port_rcvegrbuf_phys
;
86 /* rcvhdrq base, needs mmap before useful */
88 /* kernel virtual address where hdrqtail is updated */
89 void *port_rcvhdrtail_kvaddr
;
91 * temp buffer for expected send setup, allocated at open, instead
94 void *port_tid_pg_list
;
95 /* when waiting for rcv or pioavail */
96 wait_queue_head_t port_wait
;
98 * rcvegr bufs base, physical, must fit
99 * in 44 bits so 32 bit programs mmap64 44 bit works)
101 dma_addr_t port_rcvegr_phys
;
102 /* mmap of hdrq, must fit in 44 bits */
103 dma_addr_t port_rcvhdrq_phys
;
104 dma_addr_t port_rcvhdrqtailaddr_phys
;
106 * number of opens (including slave subports) on this instance
107 * (ignoring forks, dup, etc. for now)
111 * how much space to leave at start of eager TID entries for
112 * protocol use, on each TID
114 /* instead of calculating it */
116 /* non-zero if port is being shared. */
117 u16 port_subport_cnt
;
118 /* non-zero if port is being shared. */
120 /* number of pio bufs for this port (all procs, if shared) */
122 /* first pio buffer for this port */
124 /* chip offset of PIO buffers for this port */
126 /* how many alloc_pages() chunks in port_rcvegrbuf_pages */
127 u32 port_rcvegrbuf_chunks
;
128 /* how many egrbufs per chunk */
129 u32 port_rcvegrbufs_perchunk
;
130 /* order for port_rcvegrbuf_pages */
131 size_t port_rcvegrbuf_size
;
132 /* rcvhdrq size (for freeing) */
133 size_t port_rcvhdrq_size
;
134 /* next expected TID to check when looking for free */
136 /* next expected TID to check */
137 unsigned long port_flag
;
139 unsigned long int_flag
;
140 /* WAIT_RCV that timed out, no interrupt */
142 /* WAIT_PIO that timed out, no interrupt */
144 /* WAIT_RCV already happened, no wait */
146 /* WAIT_PIO already happened, no wait */
148 /* total number of rcvhdrqfull errors */
151 * Used to suppress multiple instances of same
152 * port staying stuck at same point.
154 u32 port_lastrcvhdrqtail
;
155 /* saved total number of rcvhdrqfull errors for poll edge trigger */
156 u32 port_hdrqfull_poll
;
157 /* total number of polled urgent packets */
159 /* saved total number of polled urgent packets for poll edge trigger */
160 u32 port_urgent_poll
;
161 /* pid of process using this port */
162 struct pid
*port_pid
;
163 struct pid
*port_subpid
[INFINIPATH_MAX_SUBPORT
];
164 /* same size as task_struct .comm[] */
166 /* pkeys set by this use of this port */
168 /* so file ops can get at unit */
169 struct ipath_devdata
*port_dd
;
170 /* A page of memory for rcvhdrhead, rcvegrhead, rcvegrtail * N */
171 void *subport_uregbase
;
172 /* An array of pages for the eager receive buffers * N */
173 void *subport_rcvegrbuf
;
174 /* An array of pages for the eager header queue entries * N */
175 void *subport_rcvhdr_base
;
176 /* The version of the library which opened this port */
178 /* Bitmask of active slaves */
180 /* Type of packets or conditions we want to poll for */
182 /* port rcvhdrq head offset */
184 /* receive packet sequence counter */
189 struct ipath_sge_state
;
190 struct ipath_verbs_txreq
;
193 * control information for layered drivers
195 struct _ipath_layer
{
199 struct ipath_skbinfo
{
204 struct ipath_sdma_txreq
{
208 struct scatterlist
*sg
;
211 void (*callback
)(void *, int);
212 void *callback_cookie
;
214 u16 start_idx
; /* sdma private */
215 u16 next_descq_idx
; /* sdma private */
216 struct list_head list
; /* sdma private */
219 struct ipath_sdma_desc
{
223 #define IPATH_SDMA_TXREQ_F_USELARGEBUF 0x1
224 #define IPATH_SDMA_TXREQ_F_HEADTOHOST 0x2
225 #define IPATH_SDMA_TXREQ_F_INTREQ 0x4
226 #define IPATH_SDMA_TXREQ_F_FREEBUF 0x8
227 #define IPATH_SDMA_TXREQ_F_FREEDESC 0x10
228 #define IPATH_SDMA_TXREQ_F_VL15 0x20
230 #define IPATH_SDMA_TXREQ_S_OK 0
231 #define IPATH_SDMA_TXREQ_S_SENDERROR 1
232 #define IPATH_SDMA_TXREQ_S_ABORTED 2
233 #define IPATH_SDMA_TXREQ_S_SHUTDOWN 3
235 #define IPATH_SDMA_STATUS_SCORE_BOARD_DRAIN_IN_PROG (1ull << 63)
236 #define IPATH_SDMA_STATUS_ABORT_IN_PROG (1ull << 62)
237 #define IPATH_SDMA_STATUS_INTERNAL_SDMA_ENABLE (1ull << 61)
238 #define IPATH_SDMA_STATUS_SCB_EMPTY (1ull << 30)
240 /* max dwords in small buffer packet */
241 #define IPATH_SMALLBUF_DWORDS (dd->ipath_piosize2k >> 2)
244 * Possible IB config parameters for ipath_f_get/set_ib_cfg()
246 #define IPATH_IB_CFG_LIDLMC 0 /* Get/set LID (LS16b) and Mask (MS16b) */
247 #define IPATH_IB_CFG_HRTBT 1 /* Get/set Heartbeat off/enable/auto */
248 #define IPATH_IB_HRTBT_ON 3 /* Heartbeat enabled, sent every 100msec */
249 #define IPATH_IB_HRTBT_OFF 0 /* Heartbeat off */
250 #define IPATH_IB_CFG_LWID_ENB 2 /* Get/set allowed Link-width */
251 #define IPATH_IB_CFG_LWID 3 /* Get currently active Link-width */
252 #define IPATH_IB_CFG_SPD_ENB 4 /* Get/set allowed Link speeds */
253 #define IPATH_IB_CFG_SPD 5 /* Get current Link spd */
254 #define IPATH_IB_CFG_RXPOL_ENB 6 /* Get/set Auto-RX-polarity enable */
255 #define IPATH_IB_CFG_LREV_ENB 7 /* Get/set Auto-Lane-reversal enable */
256 #define IPATH_IB_CFG_LINKLATENCY 8 /* Get Auto-Lane-reversal enable */
259 struct ipath_devdata
{
260 struct list_head ipath_list
;
262 struct ipath_kregs
const *ipath_kregs
;
263 struct ipath_cregs
const *ipath_cregs
;
265 /* mem-mapped pointer to base of chip regs */
266 u64 __iomem
*ipath_kregbase
;
267 /* end of mem-mapped chip space; range checking */
268 u64 __iomem
*ipath_kregend
;
269 /* physical address of chip for io_remap, etc. */
270 unsigned long ipath_physaddr
;
271 /* base of memory alloced for ipath_kregbase, for free */
272 u64
*ipath_kregalloc
;
273 /* ipath_cfgports pointers */
274 struct ipath_portdata
**ipath_pd
;
275 /* sk_buffs used by port 0 eager receive queue */
276 struct ipath_skbinfo
*ipath_port0_skbinfo
;
277 /* kvirt address of 1st 2k pio buffer */
278 void __iomem
*ipath_pio2kbase
;
279 /* kvirt address of 1st 4k pio buffer */
280 void __iomem
*ipath_pio4kbase
;
282 * points to area where PIOavail registers will be DMA'ed.
283 * Has to be on a page of it's own, because the page will be
284 * mapped into user program space. This copy is *ONLY* ever
285 * written by DMA, not by the driver! Need a copy per device
286 * when we get to multiple devices
288 volatile __le64
*ipath_pioavailregs_dma
;
289 /* physical address where updates occur */
290 dma_addr_t ipath_pioavailregs_phys
;
291 struct _ipath_layer ipath_layer
;
293 int (*ipath_f_intrsetup
)(struct ipath_devdata
*);
294 /* fallback to alternate interrupt type if possible */
295 int (*ipath_f_intr_fallback
)(struct ipath_devdata
*);
296 /* setup on-chip bus config */
297 int (*ipath_f_bus
)(struct ipath_devdata
*, struct pci_dev
*);
298 /* hard reset chip */
299 int (*ipath_f_reset
)(struct ipath_devdata
*);
300 int (*ipath_f_get_boardname
)(struct ipath_devdata
*, char *,
302 void (*ipath_f_init_hwerrors
)(struct ipath_devdata
*);
303 void (*ipath_f_handle_hwerrors
)(struct ipath_devdata
*, char *,
305 void (*ipath_f_quiet_serdes
)(struct ipath_devdata
*);
306 int (*ipath_f_bringup_serdes
)(struct ipath_devdata
*);
307 int (*ipath_f_early_init
)(struct ipath_devdata
*);
308 void (*ipath_f_clear_tids
)(struct ipath_devdata
*, unsigned);
309 void (*ipath_f_put_tid
)(struct ipath_devdata
*, u64 __iomem
*,
311 void (*ipath_f_tidtemplate
)(struct ipath_devdata
*);
312 void (*ipath_f_cleanup
)(struct ipath_devdata
*);
313 void (*ipath_f_setextled
)(struct ipath_devdata
*, u64
, u64
);
314 /* fill out chip-specific fields */
315 int (*ipath_f_get_base_info
)(struct ipath_portdata
*, void *);
317 void (*ipath_f_free_irq
)(struct ipath_devdata
*);
318 struct ipath_message_header
*(*ipath_f_get_msgheader
)
319 (struct ipath_devdata
*, __le32
*);
320 void (*ipath_f_config_ports
)(struct ipath_devdata
*, ushort
);
321 int (*ipath_f_get_ib_cfg
)(struct ipath_devdata
*, int);
322 int (*ipath_f_set_ib_cfg
)(struct ipath_devdata
*, int, u32
);
323 void (*ipath_f_config_jint
)(struct ipath_devdata
*, u16
, u16
);
324 void (*ipath_f_read_counters
)(struct ipath_devdata
*,
325 struct infinipath_counters
*);
326 void (*ipath_f_xgxs_reset
)(struct ipath_devdata
*);
327 /* per chip actions needed for IB Link up/down changes */
328 int (*ipath_f_ib_updown
)(struct ipath_devdata
*, int, u64
);
330 unsigned ipath_lastegr_idx
;
331 struct ipath_ibdev
*verbs_dev
;
332 struct timer_list verbs_timer
;
333 /* total dwords sent (summed from counter) */
335 /* total dwords rcvd (summed from counter) */
337 /* total packets sent (summed from counter) */
339 /* total packets rcvd (summed from counter) */
341 /* ipath_statusp initially points to this. */
343 /* GUID for this interface, in network order */
346 * aggregrate of error bits reported since last cleared, for
347 * limiting of error reporting
349 ipath_err_t ipath_lasterror
;
351 * aggregrate of error bits reported since last cleared, for
352 * limiting of hwerror reporting
354 ipath_err_t ipath_lasthwerror
;
355 /* errors masked because they occur too fast */
356 ipath_err_t ipath_maskederrs
;
357 u64 ipath_lastlinkrecov
; /* link recoveries at last ACTIVE */
358 /* these 5 fields are used to establish deltas for IB Symbol
359 * errors and linkrecovery errors. They can be reported on
360 * some chips during link negotiation prior to INIT, and with
361 * DDR when faking DDR negotiations with non-IBTA switches.
362 * The chip counters are adjusted at driver unload if there is
371 /* time in jiffies at which to re-enable maskederrs */
372 unsigned long ipath_unmasktime
;
373 /* count of egrfull errors, combined for all ports */
374 u64 ipath_last_tidfull
;
375 /* for ipath_qcheck() */
376 u64 ipath_lastport0rcv_cnt
;
377 /* template for writing TIDs */
378 u64 ipath_tidtemplate
;
379 /* value to write to free TIDs */
380 u64 ipath_tidinvalid
;
381 /* IBA6120 rcv interrupt setup */
382 u64 ipath_rhdrhead_intr_off
;
384 /* size of memory at ipath_kregbase */
386 /* number of registers used for pioavail */
388 /* IPATH_POLL, etc. */
390 /* ipath_flags driver is waiting for */
391 u32 ipath_state_wanted
;
392 /* last buffer for user use, first buf for kernel use is this
394 u32 ipath_lastport_piobuf
;
395 /* is a stats timer active */
396 u32 ipath_stats_timer_active
;
397 /* number of interrupts for this device -- saturates... */
398 u32 ipath_int_counter
;
399 /* dwords sent read from counter */
401 /* dwords received read from counter */
403 /* sent packets read from counter */
405 /* received packets read from counter */
407 /* pio bufs allocated per port */
409 /* if remainder on bufs/port, ports < extrabuf get 1 extra */
410 u32 ipath_ports_extrabuf
;
411 u32 ipath_pioupd_thresh
; /* update threshold, some chips */
413 * number of ports configured as max; zero is set to number chip
414 * supports, less gives more pio bufs/port, etc.
417 /* count of port 0 hdrqfull errors */
418 u32 ipath_p0_hdrqfull
;
419 /* port 0 number of receive eager buffers */
420 u32 ipath_p0_rcvegrcnt
;
423 * index of last piobuffer we used. Speeds up searching, by
424 * starting at this point. Doesn't matter if multiple cpu's use and
425 * update, last updater is only write that matters. Whenever it
426 * wraps, we update shadow copies. Need a copy per device when we
427 * get to multiple devices
429 u32 ipath_lastpioindex
;
430 u32 ipath_lastpioindexl
;
431 /* max length of freezemsg */
434 * consecutive times we wanted a PIO buffer but were unable to
437 u32 ipath_consec_nopiobuf
;
439 * hint that we should update ipath_pioavailshadow before
440 * looking for a PIO buffer
442 u32 ipath_upd_pio_shadow
;
443 /* so we can rewrite it after a chip reset */
445 /* so we can rewrite it after a chip reset */
447 u32 ipath_x1_fix_tries
;
448 u32 ipath_autoneg_tries
;
449 u32 serdes_first_init_done
;
451 struct ipath_relock
{
452 atomic_t ipath_relock_timer_active
;
453 struct timer_list ipath_relock_timer
;
454 unsigned int ipath_relock_interval
; /* in jiffies */
455 } ipath_relock_singleton
;
457 /* interrupt number */
459 /* HT/PCI Vendor ID (here for NodeInfo) */
461 /* HT/PCI Device ID (here for NodeInfo) */
463 /* offset in HT config space of slave/primary interface block */
464 u8 ipath_ht_slave_off
;
465 /* for write combining settings */
466 unsigned long ipath_wc_cookie
;
467 unsigned long ipath_wc_base
;
468 unsigned long ipath_wc_len
;
469 /* ref count for each pkey */
470 atomic_t ipath_pkeyrefs
[4];
471 /* shadow copy of struct page *'s for exp tid pages */
472 struct page
**ipath_pageshadow
;
473 /* shadow copy of dma handles for exp tid pages */
474 dma_addr_t
*ipath_physshadow
;
475 u64 __iomem
*ipath_egrtidbase
;
476 /* lock to workaround chip bug 9437 and others */
477 spinlock_t ipath_kernel_tid_lock
;
478 spinlock_t ipath_user_tid_lock
;
479 spinlock_t ipath_sendctrl_lock
;
480 /* around ipath_pd and (user ports) port_cnt use (intr vs free) */
481 spinlock_t ipath_uctxt_lock
;
485 * this address is mapped readonly into user processes so they can
486 * get status cheaply, whenever they want.
489 /* freeze msg if hw error put chip in freeze */
490 char *ipath_freezemsg
;
491 /* pci access data structure */
492 struct pci_dev
*pcidev
;
493 struct cdev
*user_cdev
;
494 struct cdev
*diag_cdev
;
495 struct device
*user_dev
;
496 struct device
*diag_dev
;
497 /* timer used to prevent stats overflow, error throttling, etc. */
498 struct timer_list ipath_stats_timer
;
499 /* timer to verify interrupts work, and fallback if possible */
500 struct timer_list ipath_intrchk_timer
;
501 void *ipath_dummy_hdrq
; /* used after port close */
502 dma_addr_t ipath_dummy_hdrq_phys
;
504 /* SendDMA related entries */
505 spinlock_t ipath_sdma_lock
;
506 unsigned long ipath_sdma_status
;
507 unsigned long ipath_sdma_abort_jiffies
;
508 unsigned long ipath_sdma_abort_intr_timeout
;
509 unsigned long ipath_sdma_buf_jiffies
;
510 struct ipath_sdma_desc
*ipath_sdma_descq
;
511 u64 ipath_sdma_descq_added
;
512 u64 ipath_sdma_descq_removed
;
513 int ipath_sdma_desc_nreserved
;
514 u16 ipath_sdma_descq_cnt
;
515 u16 ipath_sdma_descq_tail
;
516 u16 ipath_sdma_descq_head
;
517 u16 ipath_sdma_next_intr
;
518 u16 ipath_sdma_reset_wait
;
519 u8 ipath_sdma_generation
;
520 struct tasklet_struct ipath_sdma_abort_task
;
521 struct tasklet_struct ipath_sdma_notify_task
;
522 struct list_head ipath_sdma_activelist
;
523 struct list_head ipath_sdma_notifylist
;
524 atomic_t ipath_sdma_vl15_count
;
525 struct timer_list ipath_sdma_vl15_timer
;
527 dma_addr_t ipath_sdma_descq_phys
;
528 volatile __le64
*ipath_sdma_head_dma
;
529 dma_addr_t ipath_sdma_head_phys
;
531 unsigned long ipath_ureg_align
; /* user register alignment */
533 struct delayed_work ipath_autoneg_work
;
534 wait_queue_head_t ipath_autoneg_wait
;
536 /* HoL blocking / user app forward-progress state */
537 unsigned ipath_hol_state
;
538 unsigned ipath_hol_next
;
539 struct timer_list ipath_hol_timer
;
542 * Shadow copies of registers; size indicates read access size.
543 * Most of them are readonly, but some are write-only register,
544 * where we manipulate the bits in the shadow copy, and then write
545 * the shadow copy to infinipath.
547 * We deliberately make most of these 32 bits, since they have
548 * restricted range. For any that we read, we won't to generate 32
549 * bit accesses, since Opteron will generate 2 separate 32 bit HT
550 * transactions for a 64 bit read, and we want to avoid unnecessary
554 /* This is the 64 bit group */
557 * shadow of pioavail, check to be sure it's large enough at
560 unsigned long ipath_pioavailshadow
[8];
561 /* bitmap of send buffers available for the kernel to use with PIO. */
562 unsigned long ipath_pioavailkernel
[8];
563 /* shadow of kr_gpio_out, for rmw ops */
565 /* shadow the gpio mask register */
567 /* shadow the gpio output enable, etc... */
569 /* kr_revision shadow */
572 * shadow of ibcctrl, for interrupt handling of link changes,
577 * last ibcstatus, to suppress "duplicate" status change messages,
580 u64 ipath_lastibcstat
;
581 /* hwerrmask shadow */
582 ipath_err_t ipath_hwerrmask
;
583 ipath_err_t ipath_errormask
; /* errormask shadow */
584 /* interrupt config reg shadow */
586 /* kr_sendpiobufbase value */
587 u64 ipath_piobufbase
;
588 /* kr_ibcddrctrl shadow */
589 u64 ipath_ibcddrctrl
;
591 /* these are the "32 bit" regs */
594 * number of GUIDs in the flash for this interface; may need some
595 * rethinking for setting on other ifaces
599 * the following two are 32-bit bitmasks, but {test,clear,set}_bit
600 * all expect bit fields to be "unsigned long"
602 /* shadow kr_rcvctrl */
603 unsigned long ipath_rcvctrl
;
604 /* shadow kr_sendctrl */
605 unsigned long ipath_sendctrl
;
606 /* to not count armlaunch after cancel */
607 unsigned long ipath_lastcancel
;
608 /* count cases where special trigger was needed (double write) */
609 unsigned long ipath_spectriggerhit
;
611 /* value we put in kr_rcvhdrcnt */
613 /* value we put in kr_rcvhdrsize */
614 u32 ipath_rcvhdrsize
;
615 /* value we put in kr_rcvhdrentsize */
616 u32 ipath_rcvhdrentsize
;
617 /* offset of last entry in rcvhdrq */
619 /* kr_portcnt value */
621 /* kr_pagealign value */
623 /* number of "2KB" PIO buffers */
625 /* size in bytes of "2KB" PIO buffers */
627 /* number of "4KB" PIO buffers */
629 /* size in bytes of "4KB" PIO buffers */
631 u32 ipath_pioreserved
; /* reserved special-inkernel; */
632 /* kr_rcvegrbase value */
633 u32 ipath_rcvegrbase
;
634 /* kr_rcvegrcnt value */
636 /* kr_rcvtidbase value */
637 u32 ipath_rcvtidbase
;
638 /* kr_rcvtidcnt value */
644 /* kr_counterregbase */
646 /* shadow the control register contents */
648 /* PCI revision register (HTC rev on FPGA) */
651 /* chip address space used by 4k pio buffers */
653 /* The MTU programmed for this unit */
656 * The max size IB packet, included IB headers that we can send.
657 * Starts same as ipath_piosize, but is affected when ibmtu is
658 * changed, or by size of eager buffers
662 * ibmaxlen at init time, limited by chip and by receive buffer
663 * size. Not changed after init.
665 u32 ipath_init_ibmaxlen
;
666 /* size of each rcvegrbuffer */
667 u32 ipath_rcvegrbufsize
;
668 /* localbus width (1, 2,4,8,16,32) from config space */
669 u32 ipath_lbus_width
;
670 /* localbus speed (HT: 200,400,800,1000; PCIe 2500) */
671 u32 ipath_lbus_speed
;
673 * number of sequential ibcstatus change for polling active/quiet
674 * (i.e., link not coming up).
677 /* low and high portions of MSI capability/vector */
679 /* saved after PCIe init for restore after reset */
681 /* MSI data (vector) saved for restore */
683 /* MLID programmed for this instance */
685 /* LID programmed for this instance */
687 /* list of pkeys programmed; 0 if not set */
690 * ASCII serial number, from flash, large enough for original
691 * all digit strings, and longer QLogic serial number format
694 /* human readable board version */
695 u8 ipath_boardversion
[96];
696 u8 ipath_lbus_info
[32]; /* human readable localbus info */
697 /* chip major rev, from ipath_revision */
699 /* chip minor rev, from ipath_revision */
701 /* board rev, from ipath_revision */
703 /* saved for restore after reset */
704 u8 ipath_pci_cacheline
;
705 /* LID mask control */
707 /* link width supported */
708 u8 ipath_link_width_supported
;
709 /* link speed supported */
710 u8 ipath_link_speed_supported
;
711 u8 ipath_link_width_enabled
;
712 u8 ipath_link_speed_enabled
;
713 u8 ipath_link_width_active
;
714 u8 ipath_link_speed_active
;
715 /* Rx Polarity inversion (compensate for ~tx on partner) */
718 u8 ipath_r_portenable_shift
;
719 u8 ipath_r_intravail_shift
;
720 u8 ipath_r_tailupd_shift
;
721 u8 ipath_r_portcfg_shift
;
723 /* unit # of this chip, if present */
726 /* local link integrity counter */
727 u32 ipath_lli_counter
;
728 /* local link integrity errors */
729 u32 ipath_lli_errors
;
731 * Above counts only cases where _successive_ LocalLinkIntegrity
732 * errors were seen in the receive headers of kern-packets.
733 * Below are the three (monotonically increasing) counters
734 * maintained via GPIO interrupts on iba6120-rev2.
736 u32 ipath_rxfc_unsupvl_errs
;
737 u32 ipath_overrun_thresh_errs
;
741 * Not all devices managed by a driver instance are the same
742 * type, so these fields must be per-device.
744 u64 ipath_i_bitsextant
;
745 ipath_err_t ipath_e_bitsextant
;
746 ipath_err_t ipath_hwe_bitsextant
;
749 * Below should be computable from number of ports,
750 * since they are never modified.
752 u64 ipath_i_rcvavail_mask
;
753 u64 ipath_i_rcvurg_mask
;
754 u16 ipath_i_rcvurg_shift
;
755 u16 ipath_i_rcvavail_shift
;
758 * Register bits for selecting i2c direction and values, used for
761 u8 ipath_gpio_sda_num
;
762 u8 ipath_gpio_scl_num
;
763 u8 ipath_i2c_chain_type
;
767 /* lock for doing RMW of shadows/regs for ExtCtrl and GPIO */
768 spinlock_t ipath_gpio_lock
;
771 * IB link and linktraining states and masks that vary per chip in
772 * some way. Set at init, to avoid each IB status change interrupt
781 u16 ipath_rhf_offset
; /* offset of RHF within receive header entry */
784 * shift/mask for linkcmd, linkinitcmd, maxpktlen in ibccontol
785 * reg. Changes for IBA7220
787 u8 ibcc_lic_mask
; /* LinkInitCmd */
788 u8 ibcc_lc_shift
; /* LinkCmd */
789 u8 ibcc_mpl_shift
; /* Maxpktlen */
793 /* used to override LED behavior */
794 u8 ipath_led_override
; /* Substituted for normal value, if non-zero */
795 u16 ipath_led_override_timeoff
; /* delta to next timer event */
796 u8 ipath_led_override_vals
[2]; /* Alternates per blink-frame */
797 u8 ipath_led_override_phase
; /* Just counts, LSB picks from vals[] */
798 atomic_t ipath_led_override_timer_active
;
799 /* Used to flash LEDs in override mode */
800 struct timer_list ipath_led_override_timer
;
802 /* Support (including locks) for EEPROM logging of errors and time */
803 /* control access to actual counters, timer */
804 spinlock_t ipath_eep_st_lock
;
805 /* control high-level access to EEPROM */
806 struct mutex ipath_eep_lock
;
807 /* Below inc'd by ipath_snap_cntrs(), locked by ipath_eep_st_lock */
808 uint64_t ipath_traffic_wds
;
809 /* active time is kept in seconds, but logged in hours */
810 atomic_t ipath_active_time
;
811 /* Below are nominal shadow of EEPROM, new since last EEPROM update */
812 uint8_t ipath_eep_st_errs
[IPATH_EEP_LOG_CNT
];
813 uint8_t ipath_eep_st_new_errs
[IPATH_EEP_LOG_CNT
];
814 uint16_t ipath_eep_hrs
;
816 * masks for which bits of errs, hwerrs that cause
817 * each of the counters to increment.
819 struct ipath_eep_log_mask ipath_eep_st_masks
[IPATH_EEP_LOG_CNT
];
821 /* interrupt mitigation reload register info */
822 u16 ipath_jint_idle_ticks
; /* idle clock ticks */
823 u16 ipath_jint_max_packets
; /* max packets across all ports */
826 * lock for access to SerDes, and flags to sequence preset
827 * versus steady-state. 7220-only at the moment.
829 spinlock_t ipath_sdepb_lock
;
830 u8 ipath_presets_needed
; /* Set if presets to be restored next DOWN */
833 /* ipath_hol_state values (stopping/starting user proc, send flushing) */
834 #define IPATH_HOL_UP 0
835 #define IPATH_HOL_DOWN 1
836 /* ipath_hol_next toggle values, used when hol_state IPATH_HOL_DOWN */
837 #define IPATH_HOL_DOWNSTOP 0
838 #define IPATH_HOL_DOWNCONT 1
840 /* bit positions for sdma_status */
841 #define IPATH_SDMA_ABORTING 0
842 #define IPATH_SDMA_DISARMED 1
843 #define IPATH_SDMA_DISABLED 2
844 #define IPATH_SDMA_LAYERBUF 3
845 #define IPATH_SDMA_RUNNING 30
846 #define IPATH_SDMA_SHUTDOWN 31
848 /* bit combinations that correspond to abort states */
849 #define IPATH_SDMA_ABORT_NONE 0
850 #define IPATH_SDMA_ABORT_ABORTING (1UL << IPATH_SDMA_ABORTING)
851 #define IPATH_SDMA_ABORT_DISARMED ((1UL << IPATH_SDMA_ABORTING) | \
852 (1UL << IPATH_SDMA_DISARMED))
853 #define IPATH_SDMA_ABORT_DISABLED ((1UL << IPATH_SDMA_ABORTING) | \
854 (1UL << IPATH_SDMA_DISABLED))
855 #define IPATH_SDMA_ABORT_ABORTED ((1UL << IPATH_SDMA_ABORTING) | \
856 (1UL << IPATH_SDMA_DISARMED) | (1UL << IPATH_SDMA_DISABLED))
857 #define IPATH_SDMA_ABORT_MASK ((1UL<<IPATH_SDMA_ABORTING) | \
858 (1UL << IPATH_SDMA_DISARMED) | (1UL << IPATH_SDMA_DISABLED))
860 #define IPATH_SDMA_BUF_NONE 0
861 #define IPATH_SDMA_BUF_MASK (1UL<<IPATH_SDMA_LAYERBUF)
863 /* Private data for file operations */
864 struct ipath_filedata
{
865 struct ipath_portdata
*pd
;
868 struct ipath_user_sdma_queue
*pq
;
870 extern struct list_head ipath_dev_list
;
871 extern spinlock_t ipath_devs_lock
;
872 extern struct ipath_devdata
*ipath_lookup(int unit
);
874 int ipath_init_chip(struct ipath_devdata
*, int);
875 int ipath_enable_wc(struct ipath_devdata
*dd
);
876 void ipath_disable_wc(struct ipath_devdata
*dd
);
877 int ipath_count_units(int *npresentp
, int *nupp
, int *maxportsp
);
878 void ipath_shutdown_device(struct ipath_devdata
*);
879 void ipath_clear_freeze(struct ipath_devdata
*);
881 struct file_operations
;
882 int ipath_cdev_init(int minor
, char *name
, const struct file_operations
*fops
,
883 struct cdev
**cdevp
, struct device
**devp
);
884 void ipath_cdev_cleanup(struct cdev
**cdevp
,
885 struct device
**devp
);
887 int ipath_diag_add(struct ipath_devdata
*);
888 void ipath_diag_remove(struct ipath_devdata
*);
890 extern wait_queue_head_t ipath_state_wait
;
892 int ipath_user_add(struct ipath_devdata
*dd
);
893 void ipath_user_remove(struct ipath_devdata
*dd
);
895 struct sk_buff
*ipath_alloc_skb(struct ipath_devdata
*dd
, gfp_t
);
897 extern int ipath_diag_inuse
;
899 irqreturn_t
ipath_intr(int irq
, void *devid
);
900 int ipath_decode_err(struct ipath_devdata
*dd
, char *buf
, size_t blen
,
902 #if __IPATH_INFO || __IPATH_DBG
903 extern const char *ipath_ibcstatus_str
[];
906 /* clean up any per-chip chip-specific stuff */
907 void ipath_chip_cleanup(struct ipath_devdata
*);
908 /* clean up any chip type-specific stuff */
909 void ipath_chip_done(void);
911 /* check to see if we have to force ordering for write combining */
912 int ipath_unordered_wc(void);
914 void ipath_disarm_piobufs(struct ipath_devdata
*, unsigned first
,
916 void ipath_cancel_sends(struct ipath_devdata
*, int);
918 int ipath_create_rcvhdrq(struct ipath_devdata
*, struct ipath_portdata
*);
919 void ipath_free_pddata(struct ipath_devdata
*, struct ipath_portdata
*);
921 int ipath_parse_ushort(const char *str
, unsigned short *valp
);
923 void ipath_kreceive(struct ipath_portdata
*);
924 int ipath_setrcvhdrsize(struct ipath_devdata
*, unsigned);
925 int ipath_reset_device(int);
926 void ipath_get_faststats(unsigned long);
927 int ipath_wait_linkstate(struct ipath_devdata
*, u32
, int);
928 int ipath_set_linkstate(struct ipath_devdata
*, u8
);
929 int ipath_set_mtu(struct ipath_devdata
*, u16
);
930 int ipath_set_lid(struct ipath_devdata
*, u32
, u8
);
931 int ipath_set_rx_pol_inv(struct ipath_devdata
*dd
, u8 new_pol_inv
);
932 void ipath_enable_armlaunch(struct ipath_devdata
*);
933 void ipath_disable_armlaunch(struct ipath_devdata
*);
934 void ipath_hol_down(struct ipath_devdata
*);
935 void ipath_hol_up(struct ipath_devdata
*);
936 void ipath_hol_event(unsigned long);
937 void ipath_toggle_rclkrls(struct ipath_devdata
*);
938 void ipath_sd7220_clr_ibpar(struct ipath_devdata
*);
939 void ipath_set_relock_poll(struct ipath_devdata
*, int);
940 void ipath_shutdown_relock_poll(struct ipath_devdata
*);
942 /* for use in system calls, where we want to know device type, etc. */
943 #define port_fp(fp) ((struct ipath_filedata *)(fp)->private_data)->pd
944 #define subport_fp(fp) \
945 ((struct ipath_filedata *)(fp)->private_data)->subport
946 #define tidcursor_fp(fp) \
947 ((struct ipath_filedata *)(fp)->private_data)->tidcursor
948 #define user_sdma_queue_fp(fp) \
949 ((struct ipath_filedata *)(fp)->private_data)->pq
952 * values for ipath_flags
954 /* chip can report link latency (IB 1.2) */
955 #define IPATH_HAS_LINK_LATENCY 0x1
956 /* The chip is up and initted */
957 #define IPATH_INITTED 0x2
958 /* set if any user code has set kr_rcvhdrsize */
959 #define IPATH_RCVHDRSZ_SET 0x4
960 /* The chip is present and valid for accesses */
961 #define IPATH_PRESENT 0x8
962 /* HT link0 is only 8 bits wide, ignore upper byte crc
964 #define IPATH_8BIT_IN_HT0 0x10
965 /* HT link1 is only 8 bits wide, ignore upper byte crc
967 #define IPATH_8BIT_IN_HT1 0x20
968 /* The link is down */
969 #define IPATH_LINKDOWN 0x40
970 /* The link level is up (0x11) */
971 #define IPATH_LINKINIT 0x80
972 /* The link is in the armed (0x21) state */
973 #define IPATH_LINKARMED 0x100
974 /* The link is in the active (0x31) state */
975 #define IPATH_LINKACTIVE 0x200
976 /* link current state is unknown */
977 #define IPATH_LINKUNK 0x400
978 /* Write combining flush needed for PIO */
979 #define IPATH_PIO_FLUSH_WC 0x1000
980 /* DMA Receive tail pointer */
981 #define IPATH_NODMA_RTAIL 0x2000
982 /* no IB cable, or no device on IB cable */
983 #define IPATH_NOCABLE 0x4000
984 /* Supports port zero per packet receive interrupts via
986 #define IPATH_GPIO_INTR 0x8000
987 /* uses the coded 4byte TID, not 8 byte */
988 #define IPATH_4BYTE_TID 0x10000
989 /* packet/word counters are 32 bit, else those 4 counters
991 #define IPATH_32BITCOUNTERS 0x20000
992 /* Interrupt register is 64 bits */
993 #define IPATH_INTREG_64 0x40000
994 /* can miss port0 rx interrupts */
995 #define IPATH_DISABLED 0x80000 /* administratively disabled */
996 /* Use GPIO interrupts for new counters */
997 #define IPATH_GPIO_ERRINTRS 0x100000
998 #define IPATH_SWAP_PIOBUFS 0x200000
999 /* Supports Send DMA */
1000 #define IPATH_HAS_SEND_DMA 0x400000
1001 /* Supports Send Count (not just word count) in PBC */
1002 #define IPATH_HAS_PBC_CNT 0x800000
1003 /* Suppress heartbeat, even if turning off loopback */
1004 #define IPATH_NO_HRTBT 0x1000000
1005 #define IPATH_HAS_THRESH_UPDATE 0x4000000
1006 #define IPATH_HAS_MULT_IB_SPEED 0x8000000
1007 #define IPATH_IB_AUTONEG_INPROG 0x10000000
1008 #define IPATH_IB_AUTONEG_FAILED 0x20000000
1009 /* Linkdown-disable intentionally, Do not attempt to bring up */
1010 #define IPATH_IB_LINK_DISABLED 0x40000000
1011 #define IPATH_IB_FORCE_NOTIFY 0x80000000 /* force notify on next ib change */
1013 /* Bits in GPIO for the added interrupts */
1014 #define IPATH_GPIO_PORT0_BIT 2
1015 #define IPATH_GPIO_RXUVL_BIT 3
1016 #define IPATH_GPIO_OVRUN_BIT 4
1017 #define IPATH_GPIO_LLI_BIT 5
1018 #define IPATH_GPIO_ERRINTR_MASK 0x38
1020 /* portdata flag bit offsets */
1021 /* waiting for a packet to arrive */
1022 #define IPATH_PORT_WAITING_RCV 2
1023 /* master has not finished initializing */
1024 #define IPATH_PORT_MASTER_UNINIT 4
1025 /* waiting for an urgent packet to arrive */
1026 #define IPATH_PORT_WAITING_URG 5
1028 /* free up any allocated data at closes */
1029 void ipath_free_data(struct ipath_portdata
*dd
);
1030 u32 __iomem
*ipath_getpiobuf(struct ipath_devdata
*, u32
, u32
*);
1031 void ipath_chg_pioavailkernel(struct ipath_devdata
*dd
, unsigned start
,
1032 unsigned len
, int avail
);
1033 void ipath_init_iba7220_funcs(struct ipath_devdata
*);
1034 void ipath_init_iba6120_funcs(struct ipath_devdata
*);
1035 void ipath_init_iba6110_funcs(struct ipath_devdata
*);
1036 void ipath_get_eeprom_info(struct ipath_devdata
*);
1037 int ipath_update_eeprom_log(struct ipath_devdata
*dd
);
1038 void ipath_inc_eeprom_err(struct ipath_devdata
*dd
, u32 eidx
, u32 incr
);
1039 u64
ipath_snap_cntr(struct ipath_devdata
*, ipath_creg
);
1040 void ipath_disarm_senderrbufs(struct ipath_devdata
*);
1041 void ipath_force_pio_avail_update(struct ipath_devdata
*);
1042 void signal_ib_event(struct ipath_devdata
*dd
, enum ib_event_type ev
);
1045 * Set LED override, only the two LSBs have "public" meaning, but
1046 * any non-zero value substitutes them for the Link and LinkTrain
1049 #define IPATH_LED_PHYS 1 /* Physical (linktraining) GREEN LED */
1050 #define IPATH_LED_LOG 2 /* Logical (link) YELLOW LED */
1051 void ipath_set_led_override(struct ipath_devdata
*dd
, unsigned int val
);
1053 /* send dma routines */
1054 int setup_sdma(struct ipath_devdata
*);
1055 void teardown_sdma(struct ipath_devdata
*);
1056 void ipath_restart_sdma(struct ipath_devdata
*);
1057 void ipath_sdma_intr(struct ipath_devdata
*);
1058 int ipath_sdma_verbs_send(struct ipath_devdata
*, struct ipath_sge_state
*,
1059 u32
, struct ipath_verbs_txreq
*);
1060 /* ipath_sdma_lock should be locked before calling this. */
1061 int ipath_sdma_make_progress(struct ipath_devdata
*dd
);
1063 /* must be called under ipath_sdma_lock */
1064 static inline u16
ipath_sdma_descq_freecnt(const struct ipath_devdata
*dd
)
1066 return dd
->ipath_sdma_descq_cnt
-
1067 (dd
->ipath_sdma_descq_added
- dd
->ipath_sdma_descq_removed
) -
1068 1 - dd
->ipath_sdma_desc_nreserved
;
1071 static inline void ipath_sdma_desc_reserve(struct ipath_devdata
*dd
, u16 cnt
)
1073 dd
->ipath_sdma_desc_nreserved
+= cnt
;
1076 static inline void ipath_sdma_desc_unreserve(struct ipath_devdata
*dd
, u16 cnt
)
1078 dd
->ipath_sdma_desc_nreserved
-= cnt
;
1082 * number of words used for protocol header if not set by ipath_userinit();
1084 #define IPATH_DFLT_RCVHDRSIZE 9
1086 int ipath_get_user_pages(unsigned long, size_t, struct page
**);
1087 void ipath_release_user_pages(struct page
**, size_t);
1088 void ipath_release_user_pages_on_close(struct page
**, size_t);
1089 int ipath_eeprom_read(struct ipath_devdata
*, u8
, void *, int);
1090 int ipath_eeprom_write(struct ipath_devdata
*, u8
, const void *, int);
1091 int ipath_tempsense_read(struct ipath_devdata
*, u8 regnum
);
1092 int ipath_tempsense_write(struct ipath_devdata
*, u8 regnum
, u8 data
);
1094 /* these are used for the registers that vary with port */
1095 void ipath_write_kreg_port(const struct ipath_devdata
*, ipath_kreg
,
1099 * We could have a single register get/put routine, that takes a group type,
1100 * but this is somewhat clearer and cleaner. It also gives us some error
1101 * checking. 64 bit register reads should always work, but are inefficient
1102 * on opteron (the northbridge always generates 2 separate HT 32 bit reads),
1103 * so we use kreg32 wherever possible. User register and counter register
1104 * reads are always 32 bit reads, so only one form of those routines.
1108 * At the moment, none of the s-registers are writable, so no
1109 * ipath_write_sreg().
1113 * ipath_read_ureg32 - read 32-bit virtualized per-port register
1115 * @regno: register number
1116 * @port: port number
1118 * Return the contents of a register that is virtualized to be per port.
1119 * Returns -1 on errors (not distinguishable from valid contents at
1120 * runtime; we may add a separate error variable at some point).
1122 static inline u32
ipath_read_ureg32(const struct ipath_devdata
*dd
,
1123 ipath_ureg regno
, int port
)
1125 if (!dd
->ipath_kregbase
|| !(dd
->ipath_flags
& IPATH_PRESENT
))
1128 return readl(regno
+ (u64 __iomem
*)
1129 (dd
->ipath_uregbase
+
1130 (char __iomem
*)dd
->ipath_kregbase
+
1131 dd
->ipath_ureg_align
* port
));
1135 * ipath_write_ureg - write 32-bit virtualized per-port register
1137 * @regno: register number
1141 * Write the contents of a register that is virtualized to be per port.
1143 static inline void ipath_write_ureg(const struct ipath_devdata
*dd
,
1144 ipath_ureg regno
, u64 value
, int port
)
1146 u64 __iomem
*ubase
= (u64 __iomem
*)
1147 (dd
->ipath_uregbase
+ (char __iomem
*) dd
->ipath_kregbase
+
1148 dd
->ipath_ureg_align
* port
);
1149 if (dd
->ipath_kregbase
)
1150 writeq(value
, &ubase
[regno
]);
1153 static inline u32
ipath_read_kreg32(const struct ipath_devdata
*dd
,
1156 if (!dd
->ipath_kregbase
|| !(dd
->ipath_flags
& IPATH_PRESENT
))
1158 return readl((u32 __iomem
*) & dd
->ipath_kregbase
[regno
]);
1161 static inline u64
ipath_read_kreg64(const struct ipath_devdata
*dd
,
1164 if (!dd
->ipath_kregbase
|| !(dd
->ipath_flags
& IPATH_PRESENT
))
1167 return readq(&dd
->ipath_kregbase
[regno
]);
1170 static inline void ipath_write_kreg(const struct ipath_devdata
*dd
,
1171 ipath_kreg regno
, u64 value
)
1173 if (dd
->ipath_kregbase
)
1174 writeq(value
, &dd
->ipath_kregbase
[regno
]);
1177 static inline u64
ipath_read_creg(const struct ipath_devdata
*dd
,
1180 if (!dd
->ipath_kregbase
|| !(dd
->ipath_flags
& IPATH_PRESENT
))
1183 return readq(regno
+ (u64 __iomem
*)
1184 (dd
->ipath_cregbase
+
1185 (char __iomem
*)dd
->ipath_kregbase
));
1188 static inline u32
ipath_read_creg32(const struct ipath_devdata
*dd
,
1191 if (!dd
->ipath_kregbase
|| !(dd
->ipath_flags
& IPATH_PRESENT
))
1193 return readl(regno
+ (u64 __iomem
*)
1194 (dd
->ipath_cregbase
+
1195 (char __iomem
*)dd
->ipath_kregbase
));
1198 static inline void ipath_write_creg(const struct ipath_devdata
*dd
,
1199 ipath_creg regno
, u64 value
)
1201 if (dd
->ipath_kregbase
)
1202 writeq(value
, regno
+ (u64 __iomem
*)
1203 (dd
->ipath_cregbase
+
1204 (char __iomem
*)dd
->ipath_kregbase
));
1207 static inline void ipath_clear_rcvhdrtail(const struct ipath_portdata
*pd
)
1209 *((u64
*) pd
->port_rcvhdrtail_kvaddr
) = 0ULL;
1212 static inline u32
ipath_get_rcvhdrtail(const struct ipath_portdata
*pd
)
1214 return (u32
) le64_to_cpu(*((volatile __le64
*)
1215 pd
->port_rcvhdrtail_kvaddr
));
1218 static inline u32
ipath_get_hdrqtail(const struct ipath_portdata
*pd
)
1220 const struct ipath_devdata
*dd
= pd
->port_dd
;
1223 if (dd
->ipath_flags
& IPATH_NODMA_RTAIL
) {
1227 rhf_addr
= (__le32
*) pd
->port_rcvhdrq
+
1228 pd
->port_head
+ dd
->ipath_rhf_offset
;
1229 seq
= ipath_hdrget_seq(rhf_addr
);
1230 hdrqtail
= pd
->port_head
;
1231 if (seq
== pd
->port_seq_cnt
)
1234 hdrqtail
= ipath_get_rcvhdrtail(pd
);
1239 static inline u64
ipath_read_ireg(const struct ipath_devdata
*dd
, ipath_kreg r
)
1241 return (dd
->ipath_flags
& IPATH_INTREG_64
) ?
1242 ipath_read_kreg64(dd
, r
) : ipath_read_kreg32(dd
, r
);
1246 * from contents of IBCStatus (or a saved copy), return linkstate
1247 * Report ACTIVE_DEFER as ACTIVE, because we treat them the same
1248 * everywhere, anyway (and should be, for almost all purposes).
1250 static inline u32
ipath_ib_linkstate(struct ipath_devdata
*dd
, u64 ibcs
)
1252 u32 state
= (u32
)(ibcs
>> dd
->ibcs_ls_shift
) &
1253 INFINIPATH_IBCS_LINKSTATE_MASK
;
1254 if (state
== INFINIPATH_IBCS_L_STATE_ACT_DEFER
)
1255 state
= INFINIPATH_IBCS_L_STATE_ACTIVE
;
1259 /* from contents of IBCStatus (or a saved copy), return linktrainingstate */
1260 static inline u32
ipath_ib_linktrstate(struct ipath_devdata
*dd
, u64 ibcs
)
1262 return (u32
)(ibcs
>> INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT
) &
1267 * from contents of IBCStatus (or a saved copy), return logical link state
1268 * combination of link state and linktraining state (down, active, init,
1271 static inline u32
ipath_ib_state(struct ipath_devdata
*dd
, u64 ibcs
)
1274 ibs
= (u32
)(ibcs
>> INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT
) &
1277 (INFINIPATH_IBCS_LINKSTATE_MASK
<< dd
->ibcs_ls_shift
));
1285 struct device_driver
;
1287 extern const char ib_ipath_version
[];
1289 extern const struct attribute_group
*ipath_driver_attr_groups
[];
1291 int ipath_device_create_group(struct device
*, struct ipath_devdata
*);
1292 void ipath_device_remove_group(struct device
*, struct ipath_devdata
*);
1293 int ipath_expose_reset(struct device
*);
1295 int ipath_init_ipathfs(void);
1296 void ipath_exit_ipathfs(void);
1297 int ipathfs_add_device(struct ipath_devdata
*);
1298 int ipathfs_remove_device(struct ipath_devdata
*);
1301 * dma_addr wrappers - all 0's invalid for hw
1303 dma_addr_t
ipath_map_page(struct pci_dev
*, struct page
*, unsigned long,
1305 dma_addr_t
ipath_map_single(struct pci_dev
*, void *, size_t, int);
1306 const char *ipath_get_unit_name(int unit
);
1309 * Flush write combining store buffers (if present) and perform a write
1312 #if defined(CONFIG_X86_64)
1313 #define ipath_flush_wc() asm volatile("sfence" ::: "memory")
1315 #define ipath_flush_wc() wmb()
1318 extern unsigned ipath_debug
; /* debugging bit mask */
1319 extern unsigned ipath_linkrecovery
;
1320 extern unsigned ipath_mtu4096
;
1321 extern struct mutex ipath_mutex
;
1323 #define IPATH_DRV_NAME "ib_ipath"
1324 #define IPATH_MAJOR 233
1325 #define IPATH_USER_MINOR_BASE 0
1326 #define IPATH_DIAGPKT_MINOR 127
1327 #define IPATH_DIAG_MINOR_BASE 129
1328 #define IPATH_NMINORS 255
1330 #define ipath_dev_err(dd,fmt,...) \
1332 const struct ipath_devdata *__dd = (dd); \
1334 dev_err(&__dd->pcidev->dev, "%s: " fmt, \
1335 ipath_get_unit_name(__dd->ipath_unit), \
1338 printk(KERN_ERR IPATH_DRV_NAME ": %s: " fmt, \
1339 ipath_get_unit_name(__dd->ipath_unit), \
1343 #if _IPATH_DEBUGGING
1345 # define __IPATH_DBG_WHICH(which,fmt,...) \
1347 if (unlikely(ipath_debug & (which))) \
1348 printk(KERN_DEBUG IPATH_DRV_NAME ": %s: " fmt, \
1349 __func__,##__VA_ARGS__); \
1352 # define ipath_dbg(fmt,...) \
1353 __IPATH_DBG_WHICH(__IPATH_DBG,fmt,##__VA_ARGS__)
1354 # define ipath_cdbg(which,fmt,...) \
1355 __IPATH_DBG_WHICH(__IPATH_##which##DBG,fmt,##__VA_ARGS__)
1357 #else /* ! _IPATH_DEBUGGING */
1359 # define ipath_dbg(fmt,...)
1360 # define ipath_cdbg(which,fmt,...)
1362 #endif /* _IPATH_DEBUGGING */
1365 * this is used for formatting hw error messages...
1367 struct ipath_hwerror_msgs
{
1372 #define INFINIPATH_HWE_MSG(a, b) { .mask = INFINIPATH_HWE_##a, .msg = b }
1374 /* in ipath_intr.c... */
1375 void ipath_format_hwerrors(u64 hwerrs
,
1376 const struct ipath_hwerror_msgs
*hwerrmsgs
,
1378 char *msg
, size_t lmsg
);
1380 #endif /* _IPATH_KERNEL_H */