x86/amd-iommu: Add function to complete a tlb flush
[linux/fpc-iii.git] / drivers / media / dvb / dvb-usb / ttusb2.c
blob20ca9d9ee99b23aedb60d3ecf3e892c5d9ae71a5
1 /* DVB USB compliant linux driver for Technotrend DVB USB boxes and clones
2 * (e.g. Pinnacle 400e DVB-S USB2.0).
4 * The Pinnacle 400e uses the same protocol as the Technotrend USB1.1 boxes.
6 * TDA8263 + TDA10086
8 * I2C addresses:
9 * 0x08 - LNBP21PD - LNB power supply
10 * 0x0e - TDA10086 - Demodulator
11 * 0x50 - FX2 eeprom
12 * 0x60 - TDA8263 - Tuner
13 * 0x78 ???
15 * Copyright (c) 2002 Holger Waechtler <holger@convergence.de>
16 * Copyright (c) 2003 Felix Domke <tmbinc@elitedvb.net>
17 * Copyright (C) 2005-6 Patrick Boettcher <pb@linuxtv.org>
19 * This program is free software; you can redistribute it and/or modify it
20 * under the terms of the GNU General Public License as published by the Free
21 * Software Foundation, version 2.
23 * see Documentation/dvb/README.dvb-usb for more information
25 #define DVB_USB_LOG_PREFIX "ttusb2"
26 #include "dvb-usb.h"
28 #include "ttusb2.h"
30 #include "tda826x.h"
31 #include "tda10086.h"
32 #include "lnbp21.h"
34 /* debug */
35 static int dvb_usb_ttusb2_debug;
36 #define deb_info(args...) dprintk(dvb_usb_ttusb2_debug,0x01,args)
37 module_param_named(debug,dvb_usb_ttusb2_debug, int, 0644);
38 MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able))." DVB_USB_DEBUG_STATUS);
40 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
42 struct ttusb2_state {
43 u8 id;
46 static int ttusb2_msg(struct dvb_usb_device *d, u8 cmd,
47 u8 *wbuf, int wlen, u8 *rbuf, int rlen)
49 struct ttusb2_state *st = d->priv;
50 u8 s[wlen+4],r[64] = { 0 };
51 int ret = 0;
53 memset(s,0,wlen+4);
55 s[0] = 0xaa;
56 s[1] = ++st->id;
57 s[2] = cmd;
58 s[3] = wlen;
59 memcpy(&s[4],wbuf,wlen);
61 ret = dvb_usb_generic_rw(d, s, wlen+4, r, 64, 0);
63 if (ret != 0 ||
64 r[0] != 0x55 ||
65 r[1] != s[1] ||
66 r[2] != cmd ||
67 (rlen > 0 && r[3] != rlen)) {
68 warn("there might have been an error during control message transfer. (rlen = %d, was %d)",rlen,r[3]);
69 return -EIO;
72 if (rlen > 0)
73 memcpy(rbuf, &r[4], rlen);
75 return 0;
78 static int ttusb2_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num)
80 struct dvb_usb_device *d = i2c_get_adapdata(adap);
81 static u8 obuf[60], ibuf[60];
82 int i,read;
84 if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
85 return -EAGAIN;
87 if (num > 2)
88 warn("more than 2 i2c messages at a time is not handled yet. TODO.");
90 for (i = 0; i < num; i++) {
91 read = i+1 < num && (msg[i+1].flags & I2C_M_RD);
93 obuf[0] = (msg[i].addr << 1) | read;
94 obuf[1] = msg[i].len;
96 /* read request */
97 if (read)
98 obuf[2] = msg[i+1].len;
99 else
100 obuf[2] = 0;
102 memcpy(&obuf[3],msg[i].buf,msg[i].len);
104 if (ttusb2_msg(d, CMD_I2C_XFER, obuf, msg[i].len+3, ibuf, obuf[2] + 3) < 0) {
105 err("i2c transfer failed.");
106 break;
109 if (read) {
110 memcpy(msg[i+1].buf,&ibuf[3],msg[i+1].len);
111 i++;
115 mutex_unlock(&d->i2c_mutex);
116 return i;
119 static u32 ttusb2_i2c_func(struct i2c_adapter *adapter)
121 return I2C_FUNC_I2C;
124 static struct i2c_algorithm ttusb2_i2c_algo = {
125 .master_xfer = ttusb2_i2c_xfer,
126 .functionality = ttusb2_i2c_func,
129 /* Callbacks for DVB USB */
130 static int ttusb2_identify_state (struct usb_device *udev, struct
131 dvb_usb_device_properties *props, struct dvb_usb_device_description **desc,
132 int *cold)
134 *cold = udev->descriptor.iManufacturer == 0 && udev->descriptor.iProduct == 0;
135 return 0;
138 static int ttusb2_power_ctrl(struct dvb_usb_device *d, int onoff)
140 u8 b = onoff;
141 ttusb2_msg(d, CMD_POWER, &b, 0, NULL, 0);
142 return ttusb2_msg(d, CMD_POWER, &b, 1, NULL, 0);
146 static struct tda10086_config tda10086_config = {
147 .demod_address = 0x0e,
148 .invert = 0,
149 .diseqc_tone = 1,
150 .xtal_freq = TDA10086_XTAL_16M,
153 static int ttusb2_frontend_attach(struct dvb_usb_adapter *adap)
155 if (usb_set_interface(adap->dev->udev,0,3) < 0)
156 err("set interface to alts=3 failed");
158 if ((adap->fe = dvb_attach(tda10086_attach, &tda10086_config, &adap->dev->i2c_adap)) == NULL) {
159 deb_info("TDA10086 attach failed\n");
160 return -ENODEV;
163 return 0;
166 static int ttusb2_tuner_attach(struct dvb_usb_adapter *adap)
168 if (dvb_attach(tda826x_attach, adap->fe, 0x60, &adap->dev->i2c_adap, 0) == NULL) {
169 deb_info("TDA8263 attach failed\n");
170 return -ENODEV;
173 if (dvb_attach(lnbp21_attach, adap->fe, &adap->dev->i2c_adap, 0, 0) == NULL) {
174 deb_info("LNBP21 attach failed\n");
175 return -ENODEV;
177 return 0;
180 /* DVB USB Driver stuff */
181 static struct dvb_usb_device_properties ttusb2_properties;
182 static struct dvb_usb_device_properties ttusb2_properties_s2400;
184 static int ttusb2_probe(struct usb_interface *intf,
185 const struct usb_device_id *id)
187 if (0 == dvb_usb_device_init(intf, &ttusb2_properties,
188 THIS_MODULE, NULL, adapter_nr) ||
189 0 == dvb_usb_device_init(intf, &ttusb2_properties_s2400,
190 THIS_MODULE, NULL, adapter_nr))
191 return 0;
192 return -ENODEV;
195 static struct usb_device_id ttusb2_table [] = {
196 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PCTV_400E) },
197 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PCTV_450E) },
198 { USB_DEVICE(USB_VID_TECHNOTREND,
199 USB_PID_TECHNOTREND_CONNECT_S2400) },
200 {} /* Terminating entry */
202 MODULE_DEVICE_TABLE (usb, ttusb2_table);
204 static struct dvb_usb_device_properties ttusb2_properties = {
205 .caps = DVB_USB_IS_AN_I2C_ADAPTER,
207 .usb_ctrl = CYPRESS_FX2,
208 .firmware = "dvb-usb-pctv-400e-01.fw",
210 .size_of_priv = sizeof(struct ttusb2_state),
212 .num_adapters = 1,
213 .adapter = {
215 .streaming_ctrl = NULL, // ttusb2_streaming_ctrl,
217 .frontend_attach = ttusb2_frontend_attach,
218 .tuner_attach = ttusb2_tuner_attach,
220 /* parameter for the MPEG2-data transfer */
221 .stream = {
222 .type = USB_ISOC,
223 .count = 5,
224 .endpoint = 0x02,
225 .u = {
226 .isoc = {
227 .framesperurb = 4,
228 .framesize = 940,
229 .interval = 1,
236 .power_ctrl = ttusb2_power_ctrl,
237 .identify_state = ttusb2_identify_state,
239 .i2c_algo = &ttusb2_i2c_algo,
241 .generic_bulk_ctrl_endpoint = 0x01,
243 .num_device_descs = 2,
244 .devices = {
245 { "Pinnacle 400e DVB-S USB2.0",
246 { &ttusb2_table[0], NULL },
247 { NULL },
249 { "Pinnacle 450e DVB-S USB2.0",
250 { &ttusb2_table[1], NULL },
251 { NULL },
256 static struct dvb_usb_device_properties ttusb2_properties_s2400 = {
257 .caps = DVB_USB_IS_AN_I2C_ADAPTER,
259 .usb_ctrl = CYPRESS_FX2,
260 .firmware = "dvb-usb-tt-s2400-01.fw",
262 .size_of_priv = sizeof(struct ttusb2_state),
264 .num_adapters = 1,
265 .adapter = {
267 .streaming_ctrl = NULL,
269 .frontend_attach = ttusb2_frontend_attach,
270 .tuner_attach = ttusb2_tuner_attach,
272 /* parameter for the MPEG2-data transfer */
273 .stream = {
274 .type = USB_ISOC,
275 .count = 5,
276 .endpoint = 0x02,
277 .u = {
278 .isoc = {
279 .framesperurb = 4,
280 .framesize = 940,
281 .interval = 1,
288 .power_ctrl = ttusb2_power_ctrl,
289 .identify_state = ttusb2_identify_state,
291 .i2c_algo = &ttusb2_i2c_algo,
293 .generic_bulk_ctrl_endpoint = 0x01,
295 .num_device_descs = 1,
296 .devices = {
297 { "Technotrend TT-connect S-2400",
298 { &ttusb2_table[2], NULL },
299 { NULL },
304 static struct usb_driver ttusb2_driver = {
305 .name = "dvb_usb_ttusb2",
306 .probe = ttusb2_probe,
307 .disconnect = dvb_usb_device_exit,
308 .id_table = ttusb2_table,
311 /* module stuff */
312 static int __init ttusb2_module_init(void)
314 int result;
315 if ((result = usb_register(&ttusb2_driver))) {
316 err("usb_register failed. Error number %d",result);
317 return result;
320 return 0;
323 static void __exit ttusb2_module_exit(void)
325 /* deregister this driver from the USB subsystem */
326 usb_deregister(&ttusb2_driver);
329 module_init (ttusb2_module_init);
330 module_exit (ttusb2_module_exit);
332 MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
333 MODULE_DESCRIPTION("Driver for Pinnacle PCTV 400e DVB-S USB2.0");
334 MODULE_VERSION("1.0");
335 MODULE_LICENSE("GPL");