x86/amd-iommu: Add function to complete a tlb flush
[linux/fpc-iii.git] / drivers / media / dvb / frontends / dibx000_common.h
blob5be10eca07c025ee37e18c59cd7d30c277d7fb74
1 #ifndef DIBX000_COMMON_H
2 #define DIBX000_COMMON_H
4 enum dibx000_i2c_interface {
5 DIBX000_I2C_INTERFACE_TUNER = 0,
6 DIBX000_I2C_INTERFACE_GPIO_1_2 = 1,
7 DIBX000_I2C_INTERFACE_GPIO_3_4 = 2
8 };
10 struct dibx000_i2c_master {
11 #define DIB3000MC 1
12 #define DIB7000 2
13 #define DIB7000P 11
14 #define DIB7000MC 12
15 #define DIB8000 13
16 u16 device_rev;
18 enum dibx000_i2c_interface selected_interface;
20 // struct i2c_adapter tuner_i2c_adap;
21 struct i2c_adapter gated_tuner_i2c_adap;
23 struct i2c_adapter *i2c_adap;
24 u8 i2c_addr;
26 u16 base_reg;
29 extern int dibx000_init_i2c_master(struct dibx000_i2c_master *mst,
30 u16 device_rev, struct i2c_adapter *i2c_adap,
31 u8 i2c_addr);
32 extern struct i2c_adapter *dibx000_get_i2c_adapter(struct dibx000_i2c_master
33 *mst,
34 enum dibx000_i2c_interface
35 intf, int gating);
36 extern void dibx000_exit_i2c_master(struct dibx000_i2c_master *mst);
37 extern void dibx000_reset_i2c_master(struct dibx000_i2c_master *mst);
39 #define BAND_LBAND 0x01
40 #define BAND_UHF 0x02
41 #define BAND_VHF 0x04
42 #define BAND_SBAND 0x08
43 #define BAND_FM 0x10
45 #define BAND_OF_FREQUENCY(freq_kHz) ( (freq_kHz) <= 115000 ? BAND_FM : \
46 (freq_kHz) <= 250000 ? BAND_VHF : \
47 (freq_kHz) <= 863000 ? BAND_UHF : \
48 (freq_kHz) <= 2000000 ? BAND_LBAND : BAND_SBAND )
50 struct dibx000_agc_config {
51 /* defines the capabilities of this AGC-setting - using the BAND_-defines */
52 u8 band_caps;
54 u16 setup;
56 u16 inv_gain;
57 u16 time_stabiliz;
59 u8 alpha_level;
60 u16 thlock;
62 u8 wbd_inv;
63 u16 wbd_ref;
64 u8 wbd_sel;
65 u8 wbd_alpha;
67 u16 agc1_max;
68 u16 agc1_min;
69 u16 agc2_max;
70 u16 agc2_min;
72 u8 agc1_pt1;
73 u8 agc1_pt2;
74 u8 agc1_pt3;
76 u8 agc1_slope1;
77 u8 agc1_slope2;
79 u8 agc2_pt1;
80 u8 agc2_pt2;
82 u8 agc2_slope1;
83 u8 agc2_slope2;
85 u8 alpha_mant;
86 u8 alpha_exp;
88 u8 beta_mant;
89 u8 beta_exp;
91 u8 perform_agc_softsplit;
93 struct {
94 u16 min;
95 u16 max;
96 u16 min_thres;
97 u16 max_thres;
98 } split;
101 struct dibx000_bandwidth_config {
102 u32 internal;
103 u32 sampling;
105 u8 pll_prediv;
106 u8 pll_ratio;
107 u8 pll_range;
108 u8 pll_reset;
109 u8 pll_bypass;
111 u8 enable_refdiv;
112 u8 bypclk_div;
113 u8 IO_CLK_en_core;
114 u8 ADClkSrc;
115 u8 modulo;
117 u16 sad_cfg;
119 u32 ifreq;
120 u32 timf;
122 u32 xtal_hz;
125 enum dibx000_adc_states {
126 DIBX000_SLOW_ADC_ON = 0,
127 DIBX000_SLOW_ADC_OFF,
128 DIBX000_ADC_ON,
129 DIBX000_ADC_OFF,
130 DIBX000_VBG_ENABLE,
131 DIBX000_VBG_DISABLE,
134 #define BANDWIDTH_TO_KHZ(v) ( (v) == BANDWIDTH_8_MHZ ? 8000 : \
135 (v) == BANDWIDTH_7_MHZ ? 7000 : \
136 (v) == BANDWIDTH_6_MHZ ? 6000 : 8000 )
138 #define BANDWIDTH_TO_INDEX(v) ( \
139 (v) == 8000 ? BANDWIDTH_8_MHZ : \
140 (v) == 7000 ? BANDWIDTH_7_MHZ : \
141 (v) == 6000 ? BANDWIDTH_6_MHZ : BANDWIDTH_8_MHZ )
143 /* Chip output mode. */
144 #define OUTMODE_HIGH_Z 0
145 #define OUTMODE_MPEG2_PAR_GATED_CLK 1
146 #define OUTMODE_MPEG2_PAR_CONT_CLK 2
147 #define OUTMODE_MPEG2_SERIAL 7
148 #define OUTMODE_DIVERSITY 4
149 #define OUTMODE_MPEG2_FIFO 5
150 #define OUTMODE_ANALOG_ADC 6
152 #endif