drivers/scsi/lpfc/lpfc_disc.h

   1 /*******************************************************************
   2  * This file is part of the Emulex Linux Device Driver for         *
   3  * Fibre Channel Host Bus Adapters.                                *
   4  * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
   5  * EMULEX and SLI are trademarks of Emulex.                        *
   6  * www.emulex.com                                                  *
   7  *                                                                 *
   8  * This program is free software; you can redistribute it and/or   *
   9  * modify it under the terms of version 2 of the GNU General       *
  10  * Public License as published by the Free Software Foundation.    *
  11  * This program is distributed in the hope that it will be useful. *
  12  * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
  13  * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
  14  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
  15  * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
  16  * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
  17  * more details, a copy of which can be found in the file COPYING  *
  18  * included with this package.                                     *
  19  *******************************************************************/
  20
  21 #define FC_MAX_HOLD_RSCN     32       /* max number of deferred RSCNs */
  22 #define FC_MAX_NS_RSP        65536    /* max size NameServer rsp */
  23 #define FC_MAXLOOP           126      /* max devices supported on a fc loop */
  24 #define LPFC_DISC_FLOGI_TMO  10       /* Discovery FLOGI ratov */
  25
  26
  27 /* This is the protocol dependent definition for a Node List Entry.
  28  * This is used by Fibre Channel protocol to support FCP.
  29  */
  30
  31 /* worker thread events */
  32 enum lpfc_work_type {
  33         LPFC_EVT_ONLINE,
  34         LPFC_EVT_OFFLINE_PREP,
  35         LPFC_EVT_OFFLINE,
  36         LPFC_EVT_WARM_START,
  37         LPFC_EVT_KILL,
  38         LPFC_EVT_ELS_RETRY,
  39         LPFC_EVT_DEV_LOSS,
  40         LPFC_EVT_FASTPATH_MGMT_EVT,
  41 };
  42
  43 /* structure used to queue event to the discovery tasklet */
  44 struct lpfc_work_evt {
  45         struct list_head      evt_listp;
  46         void                 *evt_arg1;
  47         void                 *evt_arg2;
  48         enum lpfc_work_type   evt;
  49 };
  50
  51 struct lpfc_scsi_check_condition_event;
  52 struct lpfc_scsi_varqueuedepth_event;
  53 struct lpfc_scsi_event_header;
  54 struct lpfc_fabric_event_header;
  55 struct lpfc_fcprdchkerr_event;
  56
  57 /* structure used for sending events from fast path */
  58 struct lpfc_fast_path_event {
  59         struct lpfc_work_evt work_evt;
  60         struct lpfc_vport     *vport;
  61         union {
  62                 struct lpfc_scsi_check_condition_event check_cond_evt;
  63                 struct lpfc_scsi_varqueuedepth_event queue_depth_evt;
  64                 struct lpfc_scsi_event_header scsi_evt;
  65                 struct lpfc_fabric_event_header fabric_evt;
  66                 struct lpfc_fcprdchkerr_event read_check_error;
  67         } un;
  68 };
  69
  70 struct lpfc_nodelist {
  71         struct list_head nlp_listp;
  72         struct lpfc_name nlp_portname;
  73         struct lpfc_name nlp_nodename;
  74         uint32_t         nlp_flag;              /* entry  flags */
  75         uint32_t         nlp_DID;               /* FC D_ID of entry */
  76         uint32_t         nlp_last_elscmd;       /* Last ELS cmd sent */
  77         uint16_t         nlp_type;
  78 #define NLP_FC_NODE        0x1                  /* entry is an FC node */
  79 #define NLP_FABRIC         0x4                  /* entry rep a Fabric entity */
  80 #define NLP_FCP_TARGET     0x8                  /* entry is an FCP target */
  81 #define NLP_FCP_INITIATOR  0x10                 /* entry is an FCP Initiator */
  82
  83         uint16_t        nlp_rpi;
  84         uint16_t        nlp_state;              /* state transition indicator */
  85         uint16_t        nlp_prev_state;         /* state transition indicator */
  86         uint16_t        nlp_xri;                /* output exchange id for RPI */
  87         uint16_t        nlp_sid;                /* scsi id */
  88 #define NLP_NO_SID              0xffff
  89         uint16_t        nlp_maxframe;           /* Max RCV frame size */
  90         uint8_t         nlp_class_sup;          /* Supported Classes */
  91         uint8_t         nlp_retry;              /* used for ELS retries */
  92         uint8_t         nlp_fcp_info;           /* class info, bits 0-3 */
  93 #define NLP_FCP_2_DEVICE   0x10                 /* FCP-2 device */
  94
  95         uint16_t        nlp_usg_map;    /* ndlp management usage bitmap */
  96 #define NLP_USG_NODE_ACT_BIT    0x1     /* Indicate ndlp is actively used */
  97 #define NLP_USG_IACT_REQ_BIT    0x2     /* Request to inactivate ndlp */
  98 #define NLP_USG_FREE_REQ_BIT    0x4     /* Request to invoke ndlp memory free */
  99 #define NLP_USG_FREE_ACK_BIT    0x8     /* Indicate ndlp memory free invoked */
 100
 101         struct timer_list   nlp_delayfunc;      /* Used for delayed ELS cmds */
 102         struct lpfc_hba *phba;
 103         struct fc_rport *rport;                 /* Corresponding FC transport
 104                                                    port structure */
 105         struct lpfc_vport *vport;
 106         struct lpfc_work_evt els_retry_evt;
 107         struct lpfc_work_evt dev_loss_evt;
 108         unsigned long last_ramp_up_time;        /* jiffy of last ramp up */
 109         unsigned long last_q_full_time;         /* jiffy of last queue full */
 110         struct kref     kref;
 111         atomic_t cmd_pending;
 112         uint32_t cmd_qdepth;
 113         unsigned long last_change_time;
 114         struct lpfc_scsicmd_bkt *lat_data;      /* Latency data */
 115 };
 116
 117 /* Defines for nlp_flag (uint32) */
 118 #define NLP_PLOGI_SND      0x00000020   /* sent PLOGI request for this entry */
 119 #define NLP_PRLI_SND       0x00000040   /* sent PRLI request for this entry */
 120 #define NLP_ADISC_SND      0x00000080   /* sent ADISC request for this entry */
 121 #define NLP_LOGO_SND       0x00000100   /* sent LOGO request for this entry */
 122 #define NLP_RNID_SND       0x00000400   /* sent RNID request for this entry */
 123 #define NLP_ELS_SND_MASK   0x000007e0   /* sent ELS request for this entry */
 124 #define NLP_DEFER_RM       0x00010000   /* Remove this ndlp if no longer used */
 125 #define NLP_DELAY_TMO      0x00020000   /* delay timeout is running for node */
 126 #define NLP_NPR_2B_DISC    0x00040000   /* node is included in num_disc_nodes */
 127 #define NLP_RCV_PLOGI      0x00080000   /* Rcv'ed PLOGI from remote system */
 128 #define NLP_LOGO_ACC       0x00100000   /* Process LOGO after ACC completes */
 129 #define NLP_TGT_NO_SCSIID  0x00200000   /* good PRLI but no binding for scsid */
 130 #define NLP_ACC_REGLOGIN   0x01000000   /* Issue Reg Login after successful
 131                                            ACC */
 132 #define NLP_NPR_ADISC      0x02000000   /* Issue ADISC when dq'ed from
 133                                            NPR list */
 134 #define NLP_RM_DFLT_RPI    0x04000000   /* need to remove leftover dflt RPI */
 135 #define NLP_NODEV_REMOVE   0x08000000   /* Defer removal till discovery ends */
 136 #define NLP_TARGET_REMOVE  0x10000000   /* Target remove in process */
 137 #define NLP_SC_REQ         0x20000000   /* Target requires authentication */
 138 #define NLP_RPI_VALID      0x80000000   /* nlp_rpi is valid */
 139
 140 /* ndlp usage management macros */
 141 #define NLP_CHK_NODE_ACT(ndlp)          (((ndlp)->nlp_usg_map \
 142                                                 & NLP_USG_NODE_ACT_BIT) \
 143                                         && \
 144                                         !((ndlp)->nlp_usg_map \
 145                                                 & NLP_USG_FREE_ACK_BIT))
 146 #define NLP_SET_NODE_ACT(ndlp)          ((ndlp)->nlp_usg_map \
 147                                                 |= NLP_USG_NODE_ACT_BIT)
 148 #define NLP_INT_NODE_ACT(ndlp)          ((ndlp)->nlp_usg_map \
 149                                                 = NLP_USG_NODE_ACT_BIT)
 150 #define NLP_CLR_NODE_ACT(ndlp)          ((ndlp)->nlp_usg_map \
 151                                                 &= ~NLP_USG_NODE_ACT_BIT)
 152 #define NLP_CHK_IACT_REQ(ndlp)          ((ndlp)->nlp_usg_map \
 153                                                 & NLP_USG_IACT_REQ_BIT)
 154 #define NLP_SET_IACT_REQ(ndlp)          ((ndlp)->nlp_usg_map \
 155                                                 |= NLP_USG_IACT_REQ_BIT)
 156 #define NLP_CHK_FREE_REQ(ndlp)          ((ndlp)->nlp_usg_map \
 157                                                 & NLP_USG_FREE_REQ_BIT)
 158 #define NLP_SET_FREE_REQ(ndlp)          ((ndlp)->nlp_usg_map \
 159                                                 |= NLP_USG_FREE_REQ_BIT)
 160 #define NLP_CHK_FREE_ACK(ndlp)          ((ndlp)->nlp_usg_map \
 161                                                 & NLP_USG_FREE_ACK_BIT)
 162 #define NLP_SET_FREE_ACK(ndlp)          ((ndlp)->nlp_usg_map \
 163                                                 |= NLP_USG_FREE_ACK_BIT)
 164
 165 /* There are 4 different double linked lists nodelist entries can reside on.
 166  * The Port Login (PLOGI) list and Address Discovery (ADISC) list are used
 167  * when Link Up discovery or Registered State Change Notification (RSCN)
 168  * processing is needed.  Each list holds the nodes that require a PLOGI or
 169  * ADISC Extended Link Service (ELS) request.  These lists keep track of the
 170  * nodes affected by an RSCN, or a Link Up (Typically, all nodes are effected
 171  * by Link Up) event.  The unmapped_list contains all nodes that have
 172  * successfully logged into at the Fibre Channel level.  The
 173  * mapped_list will contain all nodes that are mapped FCP targets.
 174  *
 175  * The bind list is a list of undiscovered (potentially non-existent) nodes
 176  * that we have saved binding information on. This information is used when
 177  * nodes transition from the unmapped to the mapped list.
 178  */
 179
 180 /* Defines for nlp_state */
 181 #define NLP_STE_UNUSED_NODE       0x0   /* node is just allocated */
 182 #define NLP_STE_PLOGI_ISSUE       0x1   /* PLOGI was sent to NL_PORT */
 183 #define NLP_STE_ADISC_ISSUE       0x2   /* ADISC was sent to NL_PORT */
 184 #define NLP_STE_REG_LOGIN_ISSUE   0x3   /* REG_LOGIN was issued for NL_PORT */
 185 #define NLP_STE_PRLI_ISSUE        0x4   /* PRLI was sent to NL_PORT */
 186 #define NLP_STE_UNMAPPED_NODE     0x5   /* PRLI completed from NL_PORT */
 187 #define NLP_STE_MAPPED_NODE       0x6   /* Identified as a FCP Target */
 188 #define NLP_STE_NPR_NODE          0x7   /* NPort disappeared */
 189 #define NLP_STE_MAX_STATE         0x8
 190 #define NLP_STE_FREED_NODE        0xff  /* node entry was freed to MEM_NLP */
 191
 192 /* For UNUSED_NODE state, the node has just been allocated.
 193  * For PLOGI_ISSUE and REG_LOGIN_ISSUE, the node is on
 194  * the PLOGI list. For REG_LOGIN_COMPL, the node is taken off the PLOGI list
 195  * and put on the unmapped list. For ADISC processing, the node is taken off
 196  * the ADISC list and placed on either the mapped or unmapped list (depending
 197  * on its previous state). Once on the unmapped list, a PRLI is issued and the
 198  * state changed to PRLI_ISSUE. When the PRLI completion occurs, the state is
 199  * changed to PRLI_COMPL. If the completion indicates a mapped
 200  * node, the node is taken off the unmapped list. The binding list is checked
 201  * for a valid binding, or a binding is automatically assigned. If binding
 202  * assignment is unsuccessful, the node is left on the unmapped list. If
 203  * binding assignment is successful, the associated binding list entry (if
 204  * any) is removed, and the node is placed on the mapped list.
 205  */
 206 /*
 207  * For a Link Down, all nodes on the ADISC, PLOGI, unmapped or mapped
 208  * lists will receive a DEVICE_RECOVERY event. If the linkdown or devloss timers
 209  * expire, all effected nodes will receive a DEVICE_RM event.
 210  */
 211 /*
 212  * For a Link Up or RSCN, all nodes will move from the mapped / unmapped lists
 213  * to either the ADISC or PLOGI list.  After a Nameserver query or ALPA loopmap
 214  * check, additional nodes may be added (DEVICE_ADD) or removed (DEVICE_RM) to /
 215  * from the PLOGI or ADISC lists. Once the PLOGI and ADISC lists are populated,
 216  * we will first process the ADISC list.  32 entries are processed initially and
 217  * ADISC is initited for each one.  Completions / Events for each node are
 218  * funnelled thru the state machine.  As each node finishes ADISC processing, it
 219  * starts ADISC for any nodes waiting for ADISC processing. If no nodes are
 220  * waiting, and the ADISC list count is identically 0, then we are done. For
 221  * Link Up discovery, since all nodes on the PLOGI list are UNREG_LOGIN'ed, we
 222  * can issue a CLEAR_LA and reenable Link Events. Next we will process the PLOGI
 223  * list.  32 entries are processed initially and PLOGI is initited for each one.
 224  * Completions / Events for each node are funnelled thru the state machine.  As
 225  * each node finishes PLOGI processing, it starts PLOGI for any nodes waiting
 226  * for PLOGI processing. If no nodes are waiting, and the PLOGI list count is
 227  * identically 0, then we are done. We have now completed discovery / RSCN
 228  * handling. Upon completion, ALL nodes should be on either the mapped or
 229  * unmapped lists.
 230  */
 231
 232 /* Defines for Node List Entry Events that could happen */
 233 #define NLP_EVT_RCV_PLOGI         0x0   /* Rcv'd an ELS PLOGI command */
 234 #define NLP_EVT_RCV_PRLI          0x1   /* Rcv'd an ELS PRLI  command */
 235 #define NLP_EVT_RCV_LOGO          0x2   /* Rcv'd an ELS LOGO  command */
 236 #define NLP_EVT_RCV_ADISC         0x3   /* Rcv'd an ELS ADISC command */
 237 #define NLP_EVT_RCV_PDISC         0x4   /* Rcv'd an ELS PDISC command */
 238 #define NLP_EVT_RCV_PRLO          0x5   /* Rcv'd an ELS PRLO  command */
 239 #define NLP_EVT_CMPL_PLOGI        0x6   /* Sent an ELS PLOGI command */
 240 #define NLP_EVT_CMPL_PRLI         0x7   /* Sent an ELS PRLI  command */
 241 #define NLP_EVT_CMPL_LOGO         0x8   /* Sent an ELS LOGO  command */
 242 #define NLP_EVT_CMPL_ADISC        0x9   /* Sent an ELS ADISC command */
 243 #define NLP_EVT_CMPL_REG_LOGIN    0xa   /* REG_LOGIN mbox cmd completed */
 244 #define NLP_EVT_DEVICE_RM         0xb   /* Device not found in NS / ALPAmap */
 245 #define NLP_EVT_DEVICE_RECOVERY   0xc   /* Device existence unknown */
 246 #define NLP_EVT_MAX_EVENT         0xd
 247