x86/amd-iommu: Add function to complete a tlb flush
[linux/fpc-iii.git] / drivers / usb / storage / unusual_devs.h
blobd4f034ebaa8a44080af462b8876ecbc632c62cee
1 /* Driver for USB Mass Storage compliant devices
2 * Unusual Devices File
4 * Current development and maintenance by:
5 * (c) 2000-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
7 * Initial work by:
8 * (c) 2000 Adam J. Richter (adam@yggdrasil.com), Yggdrasil Computing, Inc.
10 * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
11 * information about this driver.
13 * This program is free software; you can redistribute it and/or modify it
14 * under the terms of the GNU General Public License as published by the
15 * Free Software Foundation; either version 2, or (at your option) any
16 * later version.
18 * This program is distributed in the hope that it will be useful, but
19 * WITHOUT ANY WARRANTY; without even the implied warranty of
20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
21 * General Public License for more details.
23 * You should have received a copy of the GNU General Public License along
24 * with this program; if not, write to the Free Software Foundation, Inc.,
25 * 675 Mass Ave, Cambridge, MA 02139, USA.
28 /* IMPORTANT NOTE: This file must be included in another file which does
29 * the following thing for it to work:
30 * The UNUSUAL_DEV, COMPLIANT_DEV, and USUAL_DEV macros must be defined
31 * before this file is included.
34 /* If you edit this file, please try to keep it sorted first by VendorID,
35 * then by ProductID.
37 * If you want to add an entry for this file, be sure to include the
38 * following information:
39 * - a patch that adds the entry for your device, including your
40 * email address right above the entry (plus maybe a brief
41 * explanation of the reason for the entry),
42 * - a copy of /proc/bus/usb/devices with your device plugged in
43 * running with this patch.
44 * Send your submission to either Phil Dibowitz <phil@ipom.com> or
45 * Alan Stern <stern@rowland.harvard.edu>, and don't forget to CC: the
46 * USB development list <linux-usb@vger.kernel.org> and the USB storage list
47 * <usb-storage@lists.one-eyed-alien.net>
50 /* Note: If you add an entry only in order to set the CAPACITY_OK flag,
51 * use the COMPLIANT_DEV macro instead of UNUSUAL_DEV. This is
52 * because such entries mark devices which actually work correctly,
53 * as opposed to devices that do something strangely or wrongly.
56 #if !defined(CONFIG_USB_STORAGE_SDDR09) && \
57 !defined(CONFIG_USB_STORAGE_SDDR09_MODULE)
58 #define NO_SDDR09
59 #endif
61 /* patch submitted by Vivian Bregier <Vivian.Bregier@imag.fr>
63 UNUSUAL_DEV( 0x03eb, 0x2002, 0x0100, 0x0100,
64 "ATMEL",
65 "SND1 Storage",
66 US_SC_DEVICE, US_PR_DEVICE, NULL,
67 US_FL_IGNORE_RESIDUE),
69 /* Reported by Rodolfo Quesada <rquesada@roqz.net> */
70 UNUSUAL_DEV( 0x03ee, 0x6906, 0x0003, 0x0003,
71 "VIA Technologies Inc.",
72 "Mitsumi multi cardreader",
73 US_SC_DEVICE, US_PR_DEVICE, NULL,
74 US_FL_IGNORE_RESIDUE ),
76 UNUSUAL_DEV( 0x03f0, 0x0107, 0x0200, 0x0200,
77 "HP",
78 "CD-Writer+",
79 US_SC_8070, US_PR_CB, NULL, 0),
81 /* Reported by Ben Efros <ben@pc-doctor.com> */
82 UNUSUAL_DEV( 0x03f0, 0x070c, 0x0000, 0x0000,
83 "HP",
84 "Personal Media Drive",
85 US_SC_DEVICE, US_PR_DEVICE, NULL,
86 US_FL_SANE_SENSE ),
88 /* Reported by Grant Grundler <grundler@parisc-linux.org>
89 * HP r707 camera in "Disk" mode with 2.00.23 or 2.00.24 firmware.
91 UNUSUAL_DEV( 0x03f0, 0x4002, 0x0001, 0x0001,
92 "HP",
93 "PhotoSmart R707",
94 US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY),
96 /* Reported by Sebastian Kapfer <sebastian_kapfer@gmx.net>
97 * and Olaf Hering <olh@suse.de> (different bcd's, same vendor/product)
98 * for USB floppies that need the SINGLE_LUN enforcement.
100 UNUSUAL_DEV( 0x0409, 0x0040, 0x0000, 0x9999,
101 "NEC",
102 "NEC USB UF000x",
103 US_SC_DEVICE, US_PR_DEVICE, NULL,
104 US_FL_SINGLE_LUN ),
106 /* Patch submitted by Mihnea-Costin Grigore <mihnea@zulu.ro> */
107 UNUSUAL_DEV( 0x040d, 0x6205, 0x0003, 0x0003,
108 "VIA Technologies Inc.",
109 "USB 2.0 Card Reader",
110 US_SC_DEVICE, US_PR_DEVICE, NULL,
111 US_FL_IGNORE_RESIDUE ),
113 /* Deduced by Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
114 * Entry needed for flags: US_FL_FIX_INQUIRY because initial inquiry message
115 * always fails and confuses drive.
117 UNUSUAL_DEV( 0x0411, 0x001c, 0x0113, 0x0113,
118 "Buffalo",
119 "DUB-P40G HDD",
120 US_SC_DEVICE, US_PR_DEVICE, NULL,
121 US_FL_FIX_INQUIRY ),
123 /* Submitted by Ernestas Vaiciukevicius <ernisv@gmail.com> */
124 UNUSUAL_DEV( 0x0419, 0x0100, 0x0100, 0x0100,
125 "Samsung Info. Systems America, Inc.",
126 "MP3 Player",
127 US_SC_DEVICE, US_PR_DEVICE, NULL,
128 US_FL_IGNORE_RESIDUE ),
130 /* Reported by Orgad Shaneh <orgads@gmail.com> */
131 UNUSUAL_DEV( 0x0419, 0xaace, 0x0100, 0x0100,
132 "Samsung", "MP3 Player",
133 US_SC_DEVICE, US_PR_DEVICE, NULL,
134 US_FL_IGNORE_RESIDUE ),
136 /* Reported by Christian Leber <christian@leber.de> */
137 UNUSUAL_DEV( 0x0419, 0xaaf5, 0x0100, 0x0100,
138 "TrekStor",
139 "i.Beat 115 2.0",
140 US_SC_DEVICE, US_PR_DEVICE, NULL,
141 US_FL_IGNORE_RESIDUE | US_FL_NOT_LOCKABLE ),
143 /* Reported by Stefan Werner <dustbln@gmx.de> */
144 UNUSUAL_DEV( 0x0419, 0xaaf6, 0x0100, 0x0100,
145 "TrekStor",
146 "i.Beat Joy 2.0",
147 US_SC_DEVICE, US_PR_DEVICE, NULL,
148 US_FL_IGNORE_RESIDUE ),
150 /* Reported by Pete Zaitcev <zaitcev@redhat.com>, bz#176584 */
151 UNUSUAL_DEV( 0x0420, 0x0001, 0x0100, 0x0100,
152 "GENERIC", "MP3 PLAYER", /* MyMusix PD-205 on the outside. */
153 US_SC_DEVICE, US_PR_DEVICE, NULL,
154 US_FL_IGNORE_RESIDUE ),
156 /* Reported by Andrew Nayenko <relan@bk.ru>
157 * Updated for new firmware by Phillip Potter <phillipinda@hotmail.com> */
158 UNUSUAL_DEV( 0x0421, 0x0019, 0x0592, 0x0610,
159 "Nokia",
160 "Nokia 6288",
161 US_SC_DEVICE, US_PR_DEVICE, NULL,
162 US_FL_MAX_SECTORS_64 ),
164 /* Reported by Mario Rettig <mariorettig@web.de> */
165 UNUSUAL_DEV( 0x0421, 0x042e, 0x0100, 0x0100,
166 "Nokia",
167 "Nokia 3250",
168 US_SC_DEVICE, US_PR_DEVICE, NULL,
169 US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
171 /* Reported by <honkkis@gmail.com> */
172 UNUSUAL_DEV( 0x0421, 0x0433, 0x0100, 0x0100,
173 "Nokia",
174 "E70",
175 US_SC_DEVICE, US_PR_DEVICE, NULL,
176 US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
178 /* Reported by Jon Hart <Jon.Hart@web.de> */
179 UNUSUAL_DEV( 0x0421, 0x0434, 0x0100, 0x0100,
180 "Nokia",
181 "E60",
182 US_SC_DEVICE, US_PR_DEVICE, NULL,
183 US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
185 /* Reported by Sumedha Swamy <sumedhaswamy@gmail.com> and
186 * Einar Th. Einarsson <einarthered@gmail.com> */
187 UNUSUAL_DEV( 0x0421, 0x0444, 0x0100, 0x0100,
188 "Nokia",
189 "N91",
190 US_SC_DEVICE, US_PR_DEVICE, NULL,
191 US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
193 /* Reported by Jiri Slaby <jirislaby@gmail.com> and
194 * Rene C. Castberg <Rene@Castberg.org> */
195 UNUSUAL_DEV( 0x0421, 0x0446, 0x0100, 0x0100,
196 "Nokia",
197 "N80",
198 US_SC_DEVICE, US_PR_DEVICE, NULL,
199 US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
201 /* Reported by Matthew Bloch <matthew@bytemark.co.uk> */
202 UNUSUAL_DEV( 0x0421, 0x044e, 0x0100, 0x0100,
203 "Nokia",
204 "E61",
205 US_SC_DEVICE, US_PR_DEVICE, NULL,
206 US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
208 /* Reported by Bardur Arantsson <bardur@scientician.net> */
209 UNUSUAL_DEV( 0x0421, 0x047c, 0x0370, 0x0610,
210 "Nokia",
211 "6131",
212 US_SC_DEVICE, US_PR_DEVICE, NULL,
213 US_FL_MAX_SECTORS_64 ),
215 /* Reported by Manuel Osdoba <manuel.osdoba@tu-ilmenau.de> */
216 UNUSUAL_DEV( 0x0421, 0x0492, 0x0452, 0x9999,
217 "Nokia",
218 "Nokia 6233",
219 US_SC_DEVICE, US_PR_DEVICE, NULL,
220 US_FL_MAX_SECTORS_64 ),
222 /* Reported by Alex Corcoles <alex@corcoles.net> */
223 UNUSUAL_DEV( 0x0421, 0x0495, 0x0370, 0x0370,
224 "Nokia",
225 "6234",
226 US_SC_DEVICE, US_PR_DEVICE, NULL,
227 US_FL_MAX_SECTORS_64 ),
229 #ifdef NO_SDDR09
230 UNUSUAL_DEV( 0x0436, 0x0005, 0x0100, 0x0100,
231 "Microtech",
232 "CameraMate",
233 US_SC_SCSI, US_PR_CB, NULL,
234 US_FL_SINGLE_LUN ),
235 #endif
237 /* Patch submitted by Daniel Drake <dsd@gentoo.org>
238 * Device reports nonsense bInterfaceProtocol 6 when connected over USB2 */
239 UNUSUAL_DEV( 0x0451, 0x5416, 0x0100, 0x0100,
240 "Neuros Audio",
241 "USB 2.0 HD 2.5",
242 US_SC_DEVICE, US_PR_BULK, NULL,
243 US_FL_NEED_OVERRIDE ),
246 * Pete Zaitcev <zaitcev@yahoo.com>, from Patrick C. F. Ernzer, bz#162559.
247 * The key does not actually break, but it returns zero sense which
248 * makes our SCSI stack to print confusing messages.
250 UNUSUAL_DEV( 0x0457, 0x0150, 0x0100, 0x0100,
251 "USBest Technology", /* sold by Transcend */
252 "USB Mass Storage Device",
253 US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
256 * Bohdan Linda <bohdan.linda@gmail.com>
257 * 1GB USB sticks MyFlash High Speed. I have restricted
258 * the revision to my model only
260 UNUSUAL_DEV( 0x0457, 0x0151, 0x0100, 0x0100,
261 "USB 2.0",
262 "Flash Disk",
263 US_SC_DEVICE, US_PR_DEVICE, NULL,
264 US_FL_NOT_LOCKABLE ),
266 /* Reported by Tamas Kerecsen <kerecsen@bigfoot.com>
267 * Obviously the PROM has not been customized by the VAR;
268 * the Vendor and Product string descriptors are:
269 * Generic Mass Storage (PROTOTYPE--Remember to change idVendor)
270 * Generic Manufacturer (PROTOTYPE--Remember to change idVendor)
272 UNUSUAL_DEV( 0x045e, 0xffff, 0x0000, 0x0000,
273 "Mitac",
274 "GPS",
275 US_SC_DEVICE, US_PR_DEVICE, NULL,
276 US_FL_MAX_SECTORS_64 ),
279 * This virtual floppy is found in Sun equipment (x4600, x4200m2, etc.)
280 * Reported by Pete Zaitcev <zaitcev@redhat.com>
281 * This device chokes on both version of MODE SENSE which we have, so
282 * use_10_for_ms is not effective, and we use US_FL_NO_WP_DETECT.
284 UNUSUAL_DEV( 0x046b, 0xff40, 0x0100, 0x0100,
285 "AMI",
286 "Virtual Floppy",
287 US_SC_DEVICE, US_PR_DEVICE, NULL,
288 US_FL_NO_WP_DETECT),
290 /* Patch submitted by Philipp Friedrich <philipp@void.at> */
291 UNUSUAL_DEV( 0x0482, 0x0100, 0x0100, 0x0100,
292 "Kyocera",
293 "Finecam S3x",
294 US_SC_8070, US_PR_CB, NULL, US_FL_FIX_INQUIRY),
296 /* Patch submitted by Philipp Friedrich <philipp@void.at> */
297 UNUSUAL_DEV( 0x0482, 0x0101, 0x0100, 0x0100,
298 "Kyocera",
299 "Finecam S4",
300 US_SC_8070, US_PR_CB, NULL, US_FL_FIX_INQUIRY),
302 /* Patch submitted by Stephane Galles <stephane.galles@free.fr> */
303 UNUSUAL_DEV( 0x0482, 0x0103, 0x0100, 0x0100,
304 "Kyocera",
305 "Finecam S5",
306 US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
308 /* Patch submitted by Jens Taprogge <jens.taprogge@taprogge.org> */
309 UNUSUAL_DEV( 0x0482, 0x0107, 0x0100, 0x0100,
310 "Kyocera",
311 "CONTAX SL300R T*",
312 US_SC_DEVICE, US_PR_DEVICE, NULL,
313 US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE),
315 /* Reported by Paul Stewart <stewart@wetlogic.net>
316 * This entry is needed because the device reports Sub=ff */
317 UNUSUAL_DEV( 0x04a4, 0x0004, 0x0001, 0x0001,
318 "Hitachi",
319 "DVD-CAM DZ-MV100A Camcorder",
320 US_SC_SCSI, US_PR_CB, NULL, US_FL_SINGLE_LUN),
322 /* BENQ DC5330
323 * Reported by Manuel Fombuena <mfombuena@ya.com> and
324 * Frank Copeland <fjc@thingy.apana.org.au> */
325 UNUSUAL_DEV( 0x04a5, 0x3010, 0x0100, 0x0100,
326 "Tekom Technologies, Inc",
327 "300_CAMERA",
328 US_SC_DEVICE, US_PR_DEVICE, NULL,
329 US_FL_IGNORE_RESIDUE ),
331 /* Patch for Nikon coolpix 2000
332 * Submitted by Fabien Cosse <fabien.cosse@wanadoo.fr>*/
333 UNUSUAL_DEV( 0x04b0, 0x0301, 0x0010, 0x0010,
334 "NIKON",
335 "NIKON DSC E2000",
336 US_SC_DEVICE, US_PR_DEVICE,NULL,
337 US_FL_NOT_LOCKABLE ),
339 /* Reported by Doug Maxey (dwm@austin.ibm.com) */
340 UNUSUAL_DEV( 0x04b3, 0x4001, 0x0110, 0x0110,
341 "IBM",
342 "IBM RSA2",
343 US_SC_DEVICE, US_PR_CB, NULL,
344 US_FL_MAX_SECTORS_MIN),
346 /* Reported by Simon Levitt <simon@whattf.com>
347 * This entry needs Sub and Proto fields */
348 UNUSUAL_DEV( 0x04b8, 0x0601, 0x0100, 0x0100,
349 "Epson",
350 "875DC Storage",
351 US_SC_SCSI, US_PR_CB, NULL, US_FL_FIX_INQUIRY),
353 /* Reported by Khalid Aziz <khalid@gonehiking.org>
354 * This entry is needed because the device reports Sub=ff */
355 UNUSUAL_DEV( 0x04b8, 0x0602, 0x0110, 0x0110,
356 "Epson",
357 "785EPX Storage",
358 US_SC_SCSI, US_PR_BULK, NULL, US_FL_SINGLE_LUN),
360 /* Not sure who reported this originally but
361 * Pavel Machek <pavel@ucw.cz> reported that the extra US_FL_SINGLE_LUN
362 * flag be added */
363 UNUSUAL_DEV( 0x04cb, 0x0100, 0x0000, 0x2210,
364 "Fujifilm",
365 "FinePix 1400Zoom",
366 US_SC_UFI, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY | US_FL_SINGLE_LUN),
368 /* Reported by Peter Wächtler <pwaechtler@loewe-komp.de>
369 * The device needs the flags only.
371 UNUSUAL_DEV( 0x04ce, 0x0002, 0x0074, 0x0074,
372 "ScanLogic",
373 "SL11R-IDE",
374 US_SC_DEVICE, US_PR_DEVICE, NULL,
375 US_FL_FIX_INQUIRY),
377 /* Reported by Kriston Fincher <kriston@airmail.net>
378 * Patch submitted by Sean Millichamp <sean@bruenor.org>
379 * This is to support the Panasonic PalmCam PV-SD4090
380 * This entry is needed because the device reports Sub=ff
382 UNUSUAL_DEV( 0x04da, 0x0901, 0x0100, 0x0200,
383 "Panasonic",
384 "LS-120 Camera",
385 US_SC_UFI, US_PR_DEVICE, NULL, 0),
387 /* From Yukihiro Nakai, via zaitcev@yahoo.com.
388 * This is needed for CB instead of CBI */
389 UNUSUAL_DEV( 0x04da, 0x0d05, 0x0000, 0x0000,
390 "Sharp CE-CW05",
391 "CD-R/RW Drive",
392 US_SC_8070, US_PR_CB, NULL, 0),
394 /* Reported by Adriaan Penning <a.penning@luon.net> */
395 UNUSUAL_DEV( 0x04da, 0x2372, 0x0000, 0x9999,
396 "Panasonic",
397 "DMC-LCx Camera",
398 US_SC_DEVICE, US_PR_DEVICE, NULL,
399 US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
401 /* Reported by Simeon Simeonov <simeonov_2000@yahoo.com> */
402 UNUSUAL_DEV( 0x04da, 0x2373, 0x0000, 0x9999,
403 "LEICA",
404 "D-LUX Camera",
405 US_SC_DEVICE, US_PR_DEVICE, NULL,
406 US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
408 /* Most of the following entries were developed with the help of
409 * Shuttle/SCM directly.
411 UNUSUAL_DEV( 0x04e6, 0x0001, 0x0200, 0x0200,
412 "Matshita",
413 "LS-120",
414 US_SC_8020, US_PR_CB, NULL, 0),
416 UNUSUAL_DEV( 0x04e6, 0x0002, 0x0100, 0x0100,
417 "Shuttle",
418 "eUSCSI Bridge",
419 US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init,
420 US_FL_SCM_MULT_TARG ),
422 #ifdef NO_SDDR09
423 UNUSUAL_DEV( 0x04e6, 0x0005, 0x0100, 0x0208,
424 "SCM Microsystems",
425 "eUSB CompactFlash Adapter",
426 US_SC_SCSI, US_PR_CB, NULL,
427 US_FL_SINGLE_LUN),
428 #endif
430 /* Reported by Markus Demleitner <msdemlei@cl.uni-heidelberg.de> */
431 UNUSUAL_DEV( 0x04e6, 0x0006, 0x0100, 0x0100,
432 "SCM Microsystems Inc.",
433 "eUSB MMC Adapter",
434 US_SC_SCSI, US_PR_CB, NULL,
435 US_FL_SINGLE_LUN),
437 /* Reported by Daniel Nouri <dpunktnpunkt@web.de> */
438 UNUSUAL_DEV( 0x04e6, 0x0006, 0x0205, 0x0205,
439 "Shuttle",
440 "eUSB MMC Adapter",
441 US_SC_SCSI, US_PR_DEVICE, NULL,
442 US_FL_SINGLE_LUN),
444 UNUSUAL_DEV( 0x04e6, 0x0007, 0x0100, 0x0200,
445 "Sony",
446 "Hifd",
447 US_SC_SCSI, US_PR_CB, NULL,
448 US_FL_SINGLE_LUN),
450 UNUSUAL_DEV( 0x04e6, 0x0009, 0x0200, 0x0200,
451 "Shuttle",
452 "eUSB ATA/ATAPI Adapter",
453 US_SC_8020, US_PR_CB, NULL, 0),
455 UNUSUAL_DEV( 0x04e6, 0x000a, 0x0200, 0x0200,
456 "Shuttle",
457 "eUSB CompactFlash Adapter",
458 US_SC_8020, US_PR_CB, NULL, 0),
460 UNUSUAL_DEV( 0x04e6, 0x000B, 0x0100, 0x0100,
461 "Shuttle",
462 "eUSCSI Bridge",
463 US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
464 US_FL_SCM_MULT_TARG ),
466 UNUSUAL_DEV( 0x04e6, 0x000C, 0x0100, 0x0100,
467 "Shuttle",
468 "eUSCSI Bridge",
469 US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
470 US_FL_SCM_MULT_TARG ),
472 UNUSUAL_DEV( 0x04e6, 0x0101, 0x0200, 0x0200,
473 "Shuttle",
474 "CD-RW Device",
475 US_SC_8020, US_PR_CB, NULL, 0),
477 /* Reported by Dmitry Khlystov <adminimus@gmail.com> */
478 UNUSUAL_DEV( 0x04e8, 0x507c, 0x0220, 0x0220,
479 "Samsung",
480 "YP-U3",
481 US_SC_DEVICE, US_PR_DEVICE, NULL,
482 US_FL_MAX_SECTORS_64),
484 /* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
485 * Device uses standards-violating 32-byte Bulk Command Block Wrappers and
486 * reports itself as "Proprietary SCSI Bulk." Cf. device entry 0x084d:0x0011.
488 UNUSUAL_DEV( 0x04fc, 0x80c2, 0x0100, 0x0100,
489 "Kobian Mercury",
490 "Binocam DCB-132",
491 US_SC_DEVICE, US_PR_DEVICE, NULL,
492 US_FL_BULK32),
494 /* Reported by Bob Sass <rls@vectordb.com> -- only rev 1.33 tested */
495 UNUSUAL_DEV( 0x050d, 0x0115, 0x0133, 0x0133,
496 "Belkin",
497 "USB SCSI Adaptor",
498 US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
499 US_FL_SCM_MULT_TARG ),
501 /* Iomega Clik! Drive
502 * Reported by David Chatenay <dchatenay@hotmail.com>
503 * The reason this is needed is not fully known.
505 UNUSUAL_DEV( 0x0525, 0xa140, 0x0100, 0x0100,
506 "Iomega",
507 "USB Clik! 40",
508 US_SC_8070, US_PR_DEVICE, NULL,
509 US_FL_FIX_INQUIRY ),
511 /* Added by Alan Stern <stern@rowland.harvard.edu> */
512 COMPLIANT_DEV(0x0525, 0xa4a5, 0x0000, 0x9999,
513 "Linux",
514 "File-backed Storage Gadget",
515 US_SC_DEVICE, US_PR_DEVICE, NULL,
516 US_FL_CAPACITY_OK ),
518 /* Yakumo Mega Image 37
519 * Submitted by Stephan Fuhrmann <atomenergie@t-online.de> */
520 UNUSUAL_DEV( 0x052b, 0x1801, 0x0100, 0x0100,
521 "Tekom Technologies, Inc",
522 "300_CAMERA",
523 US_SC_DEVICE, US_PR_DEVICE, NULL,
524 US_FL_IGNORE_RESIDUE ),
526 /* Another Yakumo camera.
527 * Reported by Michele Alzetta <michele.alzetta@aliceposta.it> */
528 UNUSUAL_DEV( 0x052b, 0x1804, 0x0100, 0x0100,
529 "Tekom Technologies, Inc",
530 "300_CAMERA",
531 US_SC_DEVICE, US_PR_DEVICE, NULL,
532 US_FL_IGNORE_RESIDUE ),
534 /* Reported by Iacopo Spalletti <avvisi@spalletti.it> */
535 UNUSUAL_DEV( 0x052b, 0x1807, 0x0100, 0x0100,
536 "Tekom Technologies, Inc",
537 "300_CAMERA",
538 US_SC_DEVICE, US_PR_DEVICE, NULL,
539 US_FL_IGNORE_RESIDUE ),
541 /* Yakumo Mega Image 47
542 * Reported by Bjoern Paetzel <kolrabi@kolrabi.de> */
543 UNUSUAL_DEV( 0x052b, 0x1905, 0x0100, 0x0100,
544 "Tekom Technologies, Inc",
545 "400_CAMERA",
546 US_SC_DEVICE, US_PR_DEVICE, NULL,
547 US_FL_IGNORE_RESIDUE ),
549 /* Reported by Paul Ortyl <ortylp@3miasto.net>
550 * Note that it's similar to the device above, only different prodID */
551 UNUSUAL_DEV( 0x052b, 0x1911, 0x0100, 0x0100,
552 "Tekom Technologies, Inc",
553 "400_CAMERA",
554 US_SC_DEVICE, US_PR_DEVICE, NULL,
555 US_FL_IGNORE_RESIDUE ),
557 UNUSUAL_DEV( 0x054c, 0x0010, 0x0106, 0x0450,
558 "Sony",
559 "DSC-S30/S70/S75/505V/F505/F707/F717/P8",
560 US_SC_SCSI, US_PR_DEVICE, NULL,
561 US_FL_SINGLE_LUN | US_FL_NOT_LOCKABLE | US_FL_NO_WP_DETECT ),
563 /* Submitted by Lars Jacob <jacob.lars@googlemail.com>
564 * This entry is needed because the device reports Sub=ff */
565 UNUSUAL_DEV( 0x054c, 0x0010, 0x0500, 0x0610,
566 "Sony",
567 "DSC-T1/T5/H5",
568 US_SC_8070, US_PR_DEVICE, NULL,
569 US_FL_SINGLE_LUN ),
572 /* Reported by wim@geeks.nl */
573 UNUSUAL_DEV( 0x054c, 0x0025, 0x0100, 0x0100,
574 "Sony",
575 "Memorystick NW-MS7",
576 US_SC_DEVICE, US_PR_DEVICE, NULL,
577 US_FL_SINGLE_LUN ),
579 /* Submitted by Olaf Hering, <olh@suse.de> SuSE Bugzilla #49049 */
580 UNUSUAL_DEV( 0x054c, 0x002c, 0x0501, 0x2000,
581 "Sony",
582 "USB Floppy Drive",
583 US_SC_DEVICE, US_PR_DEVICE, NULL,
584 US_FL_SINGLE_LUN ),
586 UNUSUAL_DEV( 0x054c, 0x002d, 0x0100, 0x0100,
587 "Sony",
588 "Memorystick MSAC-US1",
589 US_SC_DEVICE, US_PR_DEVICE, NULL,
590 US_FL_SINGLE_LUN ),
592 /* Submitted by Klaus Mueller <k.mueller@intershop.de> */
593 UNUSUAL_DEV( 0x054c, 0x002e, 0x0106, 0x0310,
594 "Sony",
595 "Handycam",
596 US_SC_SCSI, US_PR_DEVICE, NULL,
597 US_FL_SINGLE_LUN ),
599 /* Submitted by Rajesh Kumble Nayak <nayak@obs-nice.fr> */
600 UNUSUAL_DEV( 0x054c, 0x002e, 0x0500, 0x0500,
601 "Sony",
602 "Handycam HC-85",
603 US_SC_UFI, US_PR_DEVICE, NULL,
604 US_FL_SINGLE_LUN ),
606 UNUSUAL_DEV( 0x054c, 0x0032, 0x0000, 0x9999,
607 "Sony",
608 "Memorystick MSC-U01N",
609 US_SC_DEVICE, US_PR_DEVICE, NULL,
610 US_FL_SINGLE_LUN ),
612 /* Submitted by Michal Mlotek <mlotek@foobar.pl> */
613 UNUSUAL_DEV( 0x054c, 0x0058, 0x0000, 0x9999,
614 "Sony",
615 "PEG N760c Memorystick",
616 US_SC_DEVICE, US_PR_DEVICE, NULL,
617 US_FL_FIX_INQUIRY ),
619 UNUSUAL_DEV( 0x054c, 0x0069, 0x0000, 0x9999,
620 "Sony",
621 "Memorystick MSC-U03",
622 US_SC_UFI, US_PR_CB, NULL,
623 US_FL_SINGLE_LUN ),
625 /* Submitted by Nathan Babb <nathan@lexi.com> */
626 UNUSUAL_DEV( 0x054c, 0x006d, 0x0000, 0x9999,
627 "Sony",
628 "PEG Mass Storage",
629 US_SC_DEVICE, US_PR_DEVICE, NULL,
630 US_FL_FIX_INQUIRY ),
632 /* Submitted by Frank Engel <frankie@cse.unsw.edu.au> */
633 UNUSUAL_DEV( 0x054c, 0x0099, 0x0000, 0x9999,
634 "Sony",
635 "PEG Mass Storage",
636 US_SC_DEVICE, US_PR_DEVICE, NULL,
637 US_FL_FIX_INQUIRY ),
639 /* Submitted by Mike Alborn <malborn@deandra.homeip.net> */
640 UNUSUAL_DEV( 0x054c, 0x016a, 0x0000, 0x9999,
641 "Sony",
642 "PEG Mass Storage",
643 US_SC_DEVICE, US_PR_DEVICE, NULL,
644 US_FL_FIX_INQUIRY ),
646 /* floppy reports multiple luns */
647 UNUSUAL_DEV( 0x055d, 0x2020, 0x0000, 0x0210,
648 "SAMSUNG",
649 "SFD-321U [FW 0C]",
650 US_SC_DEVICE, US_PR_DEVICE, NULL,
651 US_FL_SINGLE_LUN ),
653 /* We keep this entry to force the transport; firmware 3.00 and later is ok. */
654 UNUSUAL_DEV( 0x057b, 0x0000, 0x0000, 0x0299,
655 "Y-E Data",
656 "Flashbuster-U",
657 US_SC_DEVICE, US_PR_CB, NULL,
658 US_FL_SINGLE_LUN),
660 /* Reported by Johann Cardon <johann.cardon@free.fr>
661 * This entry is needed only because the device reports
662 * bInterfaceClass = 0xff (vendor-specific)
664 UNUSUAL_DEV( 0x057b, 0x0022, 0x0000, 0x9999,
665 "Y-E Data",
666 "Silicon Media R/W",
667 US_SC_DEVICE, US_PR_DEVICE, NULL, 0),
669 /* Reported by RTE <raszilki@yandex.ru> */
670 UNUSUAL_DEV( 0x058f, 0x6387, 0x0141, 0x0141,
671 "JetFlash",
672 "TS1GJF2A/120",
673 US_SC_DEVICE, US_PR_DEVICE, NULL,
674 US_FL_MAX_SECTORS_64 ),
676 /* Fabrizio Fellini <fello@libero.it> */
677 UNUSUAL_DEV( 0x0595, 0x4343, 0x0000, 0x2210,
678 "Fujifilm",
679 "Digital Camera EX-20 DSC",
680 US_SC_8070, US_PR_DEVICE, NULL, 0 ),
682 /* Reported by Andre Welter <a.r.welter@gmx.de>
683 * This antique device predates the release of the Bulk-only Transport
684 * spec, and if it gets a Get-Max-LUN then it requires the host to do a
685 * Clear-Halt on the bulk endpoints. The SINGLE_LUN flag will prevent
686 * us from sending the request.
688 UNUSUAL_DEV( 0x059b, 0x0001, 0x0100, 0x0100,
689 "Iomega",
690 "ZIP 100",
691 US_SC_DEVICE, US_PR_DEVICE, NULL,
692 US_FL_SINGLE_LUN ),
694 /* Reported by <Hendryk.Pfeiffer@gmx.de> */
695 UNUSUAL_DEV( 0x059f, 0x0643, 0x0000, 0x0000,
696 "LaCie",
697 "DVD+-RW",
698 US_SC_DEVICE, US_PR_DEVICE, NULL,
699 US_FL_GO_SLOW ),
701 /* Submitted by Joel Bourquard <numlock@freesurf.ch>
702 * Some versions of this device need the SubClass and Protocol overrides
703 * while others don't.
705 UNUSUAL_DEV( 0x05ab, 0x0060, 0x1104, 0x1110,
706 "In-System",
707 "PyroGate External CD-ROM Enclosure (FCD-523)",
708 US_SC_SCSI, US_PR_BULK, NULL,
709 US_FL_NEED_OVERRIDE ),
711 /* Submitted by Sven Anderson <sven-linux@anderson.de>
712 * There are at least four ProductIDs used for iPods, so I added 0x1202 and
713 * 0x1204. They just need the US_FL_FIX_CAPACITY. As the bcdDevice appears
714 * to change with firmware updates, I changed the range to maximum for all
715 * iPod entries.
717 UNUSUAL_DEV( 0x05ac, 0x1202, 0x0000, 0x9999,
718 "Apple",
719 "iPod",
720 US_SC_DEVICE, US_PR_DEVICE, NULL,
721 US_FL_FIX_CAPACITY ),
723 /* Reported by Avi Kivity <avi@argo.co.il> */
724 UNUSUAL_DEV( 0x05ac, 0x1203, 0x0000, 0x9999,
725 "Apple",
726 "iPod",
727 US_SC_DEVICE, US_PR_DEVICE, NULL,
728 US_FL_FIX_CAPACITY ),
730 UNUSUAL_DEV( 0x05ac, 0x1204, 0x0000, 0x9999,
731 "Apple",
732 "iPod",
733 US_SC_DEVICE, US_PR_DEVICE, NULL,
734 US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
736 UNUSUAL_DEV( 0x05ac, 0x1205, 0x0000, 0x9999,
737 "Apple",
738 "iPod",
739 US_SC_DEVICE, US_PR_DEVICE, NULL,
740 US_FL_FIX_CAPACITY ),
743 * Reported by Tyson Vinson <lornoss@gmail.com>
744 * This particular productId is the iPod Nano
746 UNUSUAL_DEV( 0x05ac, 0x120a, 0x0000, 0x9999,
747 "Apple",
748 "iPod",
749 US_SC_DEVICE, US_PR_DEVICE, NULL,
750 US_FL_FIX_CAPACITY ),
752 /* Reported by Dan Williams <dcbw@redhat.com>
753 * Option N.V. mobile broadband modems
754 * Ignore driver CD mode and force into modem mode by default.
757 /* Globetrotter HSDPA; mass storage shows up as Qualcomm for vendor */
758 UNUSUAL_DEV( 0x05c6, 0x1000, 0x0000, 0x9999,
759 "Option N.V.",
760 "Mass Storage",
761 US_SC_DEVICE, US_PR_DEVICE, option_ms_init,
764 /* Reported by Blake Matheny <bmatheny@purdue.edu> */
765 UNUSUAL_DEV( 0x05dc, 0xb002, 0x0000, 0x0113,
766 "Lexar",
767 "USB CF Reader",
768 US_SC_DEVICE, US_PR_DEVICE, NULL,
769 US_FL_FIX_INQUIRY ),
771 /* The following two entries are for a Genesys USB to IDE
772 * converter chip, but it changes its ProductId depending
773 * on whether or not a disk or an optical device is enclosed
774 * They were originally reported by Alexander Oltu
775 * <alexander@all-2.com> and Peter Marks <peter.marks@turner.com>
776 * respectively.
778 * US_FL_GO_SLOW and US_FL_MAX_SECTORS_64 added by Phil Dibowitz
779 * <phil@ipom.com> as these flags were made and hard-coded
780 * special-cases were pulled from scsiglue.c.
782 UNUSUAL_DEV( 0x05e3, 0x0701, 0x0000, 0xffff,
783 "Genesys Logic",
784 "USB to IDE Optical",
785 US_SC_DEVICE, US_PR_DEVICE, NULL,
786 US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ),
788 UNUSUAL_DEV( 0x05e3, 0x0702, 0x0000, 0xffff,
789 "Genesys Logic",
790 "USB to IDE Disk",
791 US_SC_DEVICE, US_PR_DEVICE, NULL,
792 US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ),
794 /* Reported by Ben Efros <ben@pc-doctor.com> */
795 UNUSUAL_DEV( 0x05e3, 0x0723, 0x9451, 0x9451,
796 "Genesys Logic",
797 "USB to SATA",
798 US_SC_DEVICE, US_PR_DEVICE, NULL,
799 US_FL_SANE_SENSE ),
801 /* Reported by Hanno Boeck <hanno@gmx.de>
802 * Taken from the Lycoris Kernel */
803 UNUSUAL_DEV( 0x0636, 0x0003, 0x0000, 0x9999,
804 "Vivitar",
805 "Vivicam 35Xx",
806 US_SC_SCSI, US_PR_BULK, NULL,
807 US_FL_FIX_INQUIRY ),
809 UNUSUAL_DEV( 0x0644, 0x0000, 0x0100, 0x0100,
810 "TEAC",
811 "Floppy Drive",
812 US_SC_UFI, US_PR_CB, NULL, 0 ),
814 /* Reported by Darsen Lu <darsen@micro.ee.nthu.edu.tw> */
815 UNUSUAL_DEV( 0x066f, 0x8000, 0x0001, 0x0001,
816 "SigmaTel",
817 "USBMSC Audio Player",
818 US_SC_DEVICE, US_PR_DEVICE, NULL,
819 US_FL_FIX_CAPACITY ),
821 /* Reported by Rogerio Brito <rbrito@ime.usp.br> */
822 UNUSUAL_DEV( 0x067b, 0x2317, 0x0001, 0x001,
823 "Prolific Technology, Inc.",
824 "Mass Storage Device",
825 US_SC_DEVICE, US_PR_DEVICE, NULL,
826 US_FL_NOT_LOCKABLE ),
828 /* Reported by Richard -=[]=- <micro_flyer@hotmail.com> */
829 /* Change to bcdDeviceMin (0x0100 to 0x0001) reported by
830 * Thomas Bartosik <tbartdev@gmx-topmail.de> */
831 UNUSUAL_DEV( 0x067b, 0x2507, 0x0001, 0x0100,
832 "Prolific Technology Inc.",
833 "Mass Storage Device",
834 US_SC_DEVICE, US_PR_DEVICE, NULL,
835 US_FL_FIX_CAPACITY | US_FL_GO_SLOW ),
837 /* Reported by Alex Butcher <alex.butcher@assursys.co.uk> */
838 UNUSUAL_DEV( 0x067b, 0x3507, 0x0001, 0x0101,
839 "Prolific Technology Inc.",
840 "ATAPI-6 Bridge Controller",
841 US_SC_DEVICE, US_PR_DEVICE, NULL,
842 US_FL_FIX_CAPACITY | US_FL_GO_SLOW ),
844 /* Submitted by Benny Sjostrand <benny@hostmobility.com> */
845 UNUSUAL_DEV( 0x0686, 0x4011, 0x0001, 0x0001,
846 "Minolta",
847 "Dimage F300",
848 US_SC_SCSI, US_PR_BULK, NULL, 0 ),
850 /* Reported by Miguel A. Fosas <amn3s1a@ono.com> */
851 UNUSUAL_DEV( 0x0686, 0x4017, 0x0001, 0x0001,
852 "Minolta",
853 "DIMAGE E223",
854 US_SC_SCSI, US_PR_DEVICE, NULL, 0 ),
856 UNUSUAL_DEV( 0x0693, 0x0005, 0x0100, 0x0100,
857 "Hagiwara",
858 "Flashgate",
859 US_SC_SCSI, US_PR_BULK, NULL, 0 ),
861 /* Reported by David Hamilton <niftimusmaximus@lycos.com> */
862 UNUSUAL_DEV( 0x069b, 0x3004, 0x0001, 0x0001,
863 "Thomson Multimedia Inc.",
864 "RCA RD1080 MP3 Player",
865 US_SC_DEVICE, US_PR_DEVICE, NULL,
866 US_FL_FIX_CAPACITY ),
868 /* Reported by Adrian Pilchowiec <adi1981@epf.pl> */
869 UNUSUAL_DEV( 0x071b, 0x3203, 0x0000, 0x0000,
870 "RockChip",
871 "MP3",
872 US_SC_DEVICE, US_PR_DEVICE, NULL,
873 US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64),
875 /* Reported by Jean-Baptiste Onofre <jb@nanthrax.net>
876 * Support the following product :
877 * "Dane-Elec MediaTouch"
879 UNUSUAL_DEV( 0x071b, 0x32bb, 0x0000, 0x0000,
880 "RockChip",
881 "MTP",
882 US_SC_DEVICE, US_PR_DEVICE, NULL,
883 US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64),
885 /* Reported by Massimiliano Ghilardi <massimiliano.ghilardi@gmail.com>
886 * This USB MP3/AVI player device fails and disconnects if more than 128
887 * sectors (64kB) are read/written in a single command, and may be present
888 * at least in the following products:
889 * "Magnex Digital Video Panel DVP 1800"
890 * "MP4 AIGO 4GB SLOT SD"
891 * "Teclast TL-C260 MP3"
892 * "i.Meizu PMP MP3/MP4"
893 * "Speed MV8 MP4 Audio Player"
895 UNUSUAL_DEV( 0x071b, 0x3203, 0x0100, 0x0100,
896 "RockChip",
897 "ROCK MP3",
898 US_SC_DEVICE, US_PR_DEVICE, NULL,
899 US_FL_MAX_SECTORS_64),
901 /* Reported by Olivier Blondeau <zeitoun@gmail.com> */
902 UNUSUAL_DEV( 0x0727, 0x0306, 0x0100, 0x0100,
903 "ATMEL",
904 "SND1 Storage",
905 US_SC_DEVICE, US_PR_DEVICE, NULL,
906 US_FL_IGNORE_RESIDUE),
908 /* Submitted by Roman Hodek <roman@hodek.net> */
909 UNUSUAL_DEV( 0x0781, 0x0001, 0x0200, 0x0200,
910 "Sandisk",
911 "ImageMate SDDR-05a",
912 US_SC_SCSI, US_PR_CB, NULL,
913 US_FL_SINGLE_LUN ),
915 UNUSUAL_DEV( 0x0781, 0x0002, 0x0009, 0x0009,
916 "SanDisk Corporation",
917 "ImageMate CompactFlash USB",
918 US_SC_DEVICE, US_PR_DEVICE, NULL,
919 US_FL_FIX_CAPACITY ),
921 UNUSUAL_DEV( 0x0781, 0x0100, 0x0100, 0x0100,
922 "Sandisk",
923 "ImageMate SDDR-12",
924 US_SC_SCSI, US_PR_CB, NULL,
925 US_FL_SINGLE_LUN ),
927 /* Reported by Eero Volotinen <eero@ping-viini.org> */
928 UNUSUAL_DEV( 0x07ab, 0xfccd, 0x0000, 0x9999,
929 "Freecom Technologies",
930 "FHD-Classic",
931 US_SC_DEVICE, US_PR_DEVICE, NULL,
932 US_FL_FIX_CAPACITY),
934 UNUSUAL_DEV( 0x07af, 0x0004, 0x0100, 0x0133,
935 "Microtech",
936 "USB-SCSI-DB25",
937 US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
938 US_FL_SCM_MULT_TARG ),
940 UNUSUAL_DEV( 0x07af, 0x0005, 0x0100, 0x0100,
941 "Microtech",
942 "USB-SCSI-HD50",
943 US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init,
944 US_FL_SCM_MULT_TARG ),
946 #ifdef NO_SDDR09
947 UNUSUAL_DEV( 0x07af, 0x0006, 0x0100, 0x0100,
948 "Microtech",
949 "CameraMate",
950 US_SC_SCSI, US_PR_CB, NULL,
951 US_FL_SINGLE_LUN ),
952 #endif
954 /* Datafab KECF-USB / Sagatek DCS-CF / Simpletech Flashlink UCF-100
955 * Only revision 1.13 tested (same for all of the above devices,
956 * based on the Datafab DF-UG-07 chip). Needed for US_FL_FIX_INQUIRY.
957 * Submitted by Marek Michalkiewicz <marekm@amelek.gda.pl>.
958 * See also http://martin.wilck.bei.t-online.de/#kecf .
960 UNUSUAL_DEV( 0x07c4, 0xa400, 0x0000, 0xffff,
961 "Datafab",
962 "KECF-USB",
963 US_SC_DEVICE, US_PR_DEVICE, NULL,
964 US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY ),
966 /* Reported by Rauch Wolke <rauchwolke@gmx.net>
967 * and augmented by binbin <binbinsh@gmail.com> (Bugzilla #12882)
969 UNUSUAL_DEV( 0x07c4, 0xa4a5, 0x0000, 0xffff,
970 "Simple Tech/Datafab",
971 "CF+SM Reader",
972 US_SC_DEVICE, US_PR_DEVICE, NULL,
973 US_FL_IGNORE_RESIDUE | US_FL_MAX_SECTORS_64 ),
975 /* Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant
976 * to the USB storage specification in two ways:
977 * - They tell us they are using transport protocol CBI. In reality they
978 * are using transport protocol CB.
979 * - They don't like the INQUIRY command. So we must handle this command
980 * of the SCSI layer ourselves.
981 * - Some cameras with idProduct=0x1001 and bcdDevice=0x1000 have
982 * bInterfaceProtocol=0x00 (US_PR_CBI) while others have 0x01 (US_PR_CB).
983 * So don't remove the US_PR_CB override!
984 * - Cameras with bcdDevice=0x9009 require the US_SC_8070 override.
986 UNUSUAL_DEV( 0x07cf, 0x1001, 0x1000, 0x9999,
987 "Casio",
988 "QV DigitalCamera",
989 US_SC_8070, US_PR_CB, NULL,
990 US_FL_NEED_OVERRIDE | US_FL_FIX_INQUIRY ),
992 /* Submitted by Hartmut Wahl <hwahl@hwahl.de>*/
993 UNUSUAL_DEV( 0x0839, 0x000a, 0x0001, 0x0001,
994 "Samsung",
995 "Digimax 410",
996 US_SC_DEVICE, US_PR_DEVICE, NULL,
997 US_FL_FIX_INQUIRY),
999 /* Reported by Luciano Rocha <luciano@eurotux.com> */
1000 UNUSUAL_DEV( 0x0840, 0x0082, 0x0001, 0x0001,
1001 "Argosy",
1002 "Storage",
1003 US_SC_DEVICE, US_PR_DEVICE, NULL,
1004 US_FL_FIX_CAPACITY),
1006 /* Reported and patched by Nguyen Anh Quynh <aquynh@gmail.com> */
1007 UNUSUAL_DEV( 0x0840, 0x0084, 0x0001, 0x0001,
1008 "Argosy",
1009 "Storage",
1010 US_SC_DEVICE, US_PR_DEVICE, NULL,
1011 US_FL_FIX_CAPACITY),
1013 /* Reported by Martijn Hijdra <martijn.hijdra@gmail.com> */
1014 UNUSUAL_DEV( 0x0840, 0x0085, 0x0001, 0x0001,
1015 "Argosy",
1016 "Storage",
1017 US_SC_DEVICE, US_PR_DEVICE, NULL,
1018 US_FL_FIX_CAPACITY),
1020 /* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
1021 * Flag will support Bulk devices which use a standards-violating 32-byte
1022 * Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with
1023 * Grandtech GT892x chip, which request "Proprietary SCSI Bulk" support.
1026 UNUSUAL_DEV( 0x084d, 0x0011, 0x0110, 0x0110,
1027 "Grandtech",
1028 "DC2MEGA",
1029 US_SC_DEVICE, US_PR_DEVICE, NULL,
1030 US_FL_BULK32),
1032 /* Andrew Lunn <andrew@lunn.ch>
1033 * PanDigital Digital Picture Frame. Does not like ALLOW_MEDIUM_REMOVAL
1034 * on LUN 4.
1035 * Note: Vend:Prod clash with "Ltd Maxell WS30 Slim Digital Camera"
1037 UNUSUAL_DEV( 0x0851, 0x1543, 0x0200, 0x0200,
1038 "PanDigital",
1039 "Photo Frame",
1040 US_SC_DEVICE, US_PR_DEVICE, NULL,
1041 US_FL_NOT_LOCKABLE),
1043 /* Submitted by Jan De Luyck <lkml@kcore.org> */
1044 UNUSUAL_DEV( 0x08bd, 0x1100, 0x0000, 0x0000,
1045 "CITIZEN",
1046 "X1DE-USB",
1047 US_SC_DEVICE, US_PR_DEVICE, NULL,
1048 US_FL_SINGLE_LUN),
1050 /* Submitted by Dylan Taft <d13f00l@gmail.com>
1051 * US_FL_IGNORE_RESIDUE Needed
1053 UNUSUAL_DEV( 0x08ca, 0x3103, 0x0100, 0x0100,
1054 "AIPTEK",
1055 "Aiptek USB Keychain MP3 Player",
1056 US_SC_DEVICE, US_PR_DEVICE, NULL,
1057 US_FL_IGNORE_RESIDUE),
1059 /* Entry needed for flags. Moreover, all devices with this ID use
1060 * bulk-only transport, but _some_ falsely report Control/Bulk instead.
1061 * One example is "Trumpion Digital Research MYMP3".
1062 * Submitted by Bjoern Brill <brill(at)fs.math.uni-frankfurt.de>
1064 UNUSUAL_DEV( 0x090a, 0x1001, 0x0100, 0x0100,
1065 "Trumpion",
1066 "t33520 USB Flash Card Controller",
1067 US_SC_DEVICE, US_PR_BULK, NULL,
1068 US_FL_NEED_OVERRIDE ),
1070 /* Reported by Filippo Bardelli <filibard@libero.it>
1071 * The device reports a subclass of RBC, which is wrong.
1073 UNUSUAL_DEV( 0x090a, 0x1050, 0x0100, 0x0100,
1074 "Trumpion Microelectronics, Inc.",
1075 "33520 USB Digital Voice Recorder",
1076 US_SC_UFI, US_PR_DEVICE, NULL,
1079 /* Trumpion Microelectronics MP3 player (felipe_alfaro@linuxmail.org) */
1080 UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999,
1081 "Trumpion",
1082 "MP3 player",
1083 US_SC_RBC, US_PR_BULK, NULL,
1084 0 ),
1086 /* aeb */
1087 UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
1088 "Feiya",
1089 "5-in-1 Card Reader",
1090 US_SC_DEVICE, US_PR_DEVICE, NULL,
1091 US_FL_FIX_CAPACITY ),
1093 /* This Pentax still camera is not conformant
1094 * to the USB storage specification: -
1095 * - It does not like the INQUIRY command. So we must handle this command
1096 * of the SCSI layer ourselves.
1097 * Tested on Rev. 10.00 (0x1000)
1098 * Submitted by James Courtier-Dutton <James@superbug.demon.co.uk>
1100 UNUSUAL_DEV( 0x0a17, 0x0004, 0x1000, 0x1000,
1101 "Pentax",
1102 "Optio 2/3/400",
1103 US_SC_DEVICE, US_PR_DEVICE, NULL,
1104 US_FL_FIX_INQUIRY ),
1106 /* These are virtual windows driver CDs, which the zd1211rw driver
1107 * automatically converts into WLAN devices. */
1108 UNUSUAL_DEV( 0x0ace, 0x2011, 0x0101, 0x0101,
1109 "ZyXEL",
1110 "G-220F USB-WLAN Install",
1111 US_SC_DEVICE, US_PR_DEVICE, NULL,
1112 US_FL_IGNORE_DEVICE ),
1114 UNUSUAL_DEV( 0x0ace, 0x20ff, 0x0101, 0x0101,
1115 "SiteCom",
1116 "WL-117 USB-WLAN Install",
1117 US_SC_DEVICE, US_PR_DEVICE, NULL,
1118 US_FL_IGNORE_DEVICE ),
1120 /* Reported by Dan Williams <dcbw@redhat.com>
1121 * Option N.V. mobile broadband modems
1122 * Ignore driver CD mode and force into modem mode by default.
1125 /* iCON 225 */
1126 UNUSUAL_DEV( 0x0af0, 0x6971, 0x0000, 0x9999,
1127 "Option N.V.",
1128 "Mass Storage",
1129 US_SC_DEVICE, US_PR_DEVICE, option_ms_init,
1132 /* Reported by F. Aben <f.aben@option.com>
1133 * This device (wrongly) has a vendor-specific device descriptor.
1134 * The entry is needed so usb-storage can bind to it's mass-storage
1135 * interface as an interface driver */
1136 UNUSUAL_DEV( 0x0af0, 0x7401, 0x0000, 0x0000,
1137 "Option",
1138 "GI 0401 SD-Card",
1139 US_SC_DEVICE, US_PR_DEVICE, NULL,
1140 0 ),
1142 /* Reported by Jan Dumon <j.dumon@option.com>
1143 * This device (wrongly) has a vendor-specific device descriptor.
1144 * The entry is needed so usb-storage can bind to it's mass-storage
1145 * interface as an interface driver */
1146 UNUSUAL_DEV( 0x0af0, 0x7501, 0x0000, 0x0000,
1147 "Option",
1148 "GI 0431 SD-Card",
1149 US_SC_DEVICE, US_PR_DEVICE, NULL,
1150 0 ),
1152 /* Reported by Ben Efros <ben@pc-doctor.com> */
1153 UNUSUAL_DEV( 0x0bc2, 0x3010, 0x0000, 0x0000,
1154 "Seagate",
1155 "FreeAgent Pro",
1156 US_SC_DEVICE, US_PR_DEVICE, NULL,
1157 US_FL_SANE_SENSE ),
1159 UNUSUAL_DEV( 0x0d49, 0x7310, 0x0000, 0x9999,
1160 "Maxtor",
1161 "USB to SATA",
1162 US_SC_DEVICE, US_PR_DEVICE, NULL,
1163 US_FL_SANE_SENSE),
1166 * Pete Zaitcev <zaitcev@yahoo.com>, bz#164688.
1167 * The device blatantly ignores LUN and returns 1 in GetMaxLUN.
1169 UNUSUAL_DEV( 0x0c45, 0x1060, 0x0100, 0x0100,
1170 "Unknown",
1171 "Unknown",
1172 US_SC_DEVICE, US_PR_DEVICE, NULL,
1173 US_FL_SINGLE_LUN ),
1175 /* Submitted by Joris Struyve <joris@struyve.be> */
1176 UNUSUAL_DEV( 0x0d96, 0x410a, 0x0001, 0xffff,
1177 "Medion",
1178 "MD 7425",
1179 US_SC_DEVICE, US_PR_DEVICE, NULL,
1180 US_FL_FIX_INQUIRY),
1183 * Entry for Jenoptik JD 5200z3
1185 * email: car.busse@gmx.de
1187 UNUSUAL_DEV( 0x0d96, 0x5200, 0x0001, 0x0200,
1188 "Jenoptik",
1189 "JD 5200 z3",
1190 US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
1192 /* Reported by Jason Johnston <killean@shaw.ca> */
1193 UNUSUAL_DEV( 0x0dc4, 0x0073, 0x0000, 0x0000,
1194 "Macpower Technology Co.LTD.",
1195 "USB 2.0 3.5\" DEVICE",
1196 US_SC_DEVICE, US_PR_DEVICE, NULL,
1197 US_FL_FIX_CAPACITY),
1199 /* Reported by Lubomir Blaha <tritol@trilogic.cz>
1200 * I _REALLY_ don't know what 3rd, 4th number and all defines mean, but this
1201 * works for me. Can anybody correct these values? (I able to test corrected
1202 * version.)
1204 UNUSUAL_DEV( 0x0dd8, 0x1060, 0x0000, 0xffff,
1205 "Netac",
1206 "USB-CF-Card",
1207 US_SC_DEVICE, US_PR_DEVICE, NULL,
1208 US_FL_FIX_INQUIRY ),
1210 /* Reported by Edward Chapman (taken from linux-usb mailing list)
1211 Netac OnlyDisk Mini U2CV2 512MB USB 2.0 Flash Drive */
1212 UNUSUAL_DEV( 0x0dd8, 0xd202, 0x0000, 0x9999,
1213 "Netac",
1214 "USB Flash Disk",
1215 US_SC_DEVICE, US_PR_DEVICE, NULL,
1216 US_FL_IGNORE_RESIDUE ),
1219 /* Patch by Stephan Walter <stephan.walter@epfl.ch>
1220 * I don't know why, but it works... */
1221 UNUSUAL_DEV( 0x0dda, 0x0001, 0x0012, 0x0012,
1222 "WINWARD",
1223 "Music Disk",
1224 US_SC_DEVICE, US_PR_DEVICE, NULL,
1225 US_FL_IGNORE_RESIDUE ),
1227 /* Reported by Ian McConnell <ian at emit.demon.co.uk> */
1228 UNUSUAL_DEV( 0x0dda, 0x0301, 0x0012, 0x0012,
1229 "PNP_MP3",
1230 "PNP_MP3 PLAYER",
1231 US_SC_DEVICE, US_PR_DEVICE, NULL,
1232 US_FL_IGNORE_RESIDUE ),
1234 /* Reported by Jim McCloskey <mcclosk@ucsc.edu> */
1235 UNUSUAL_DEV( 0x0e21, 0x0520, 0x0100, 0x0100,
1236 "Cowon Systems",
1237 "iAUDIO M5",
1238 US_SC_DEVICE, US_PR_BULK, NULL,
1239 US_FL_NEED_OVERRIDE ),
1241 /* Submitted by Antoine Mairesse <antoine.mairesse@free.fr> */
1242 UNUSUAL_DEV( 0x0ed1, 0x6660, 0x0100, 0x0300,
1243 "USB",
1244 "Solid state disk",
1245 US_SC_DEVICE, US_PR_DEVICE, NULL,
1246 US_FL_FIX_INQUIRY ),
1248 /* Submitted by Daniel Drake <dsd@gentoo.org>
1249 * Reported by dayul on the Gentoo Forums */
1250 UNUSUAL_DEV( 0x0ea0, 0x2168, 0x0110, 0x0110,
1251 "Ours Technology",
1252 "Flash Disk",
1253 US_SC_DEVICE, US_PR_DEVICE, NULL,
1254 US_FL_IGNORE_RESIDUE ),
1256 /* Reported by Rastislav Stanik <rs_kernel@yahoo.com> */
1257 UNUSUAL_DEV( 0x0ea0, 0x6828, 0x0110, 0x0110,
1258 "USB",
1259 "Flash Disk",
1260 US_SC_DEVICE, US_PR_DEVICE, NULL,
1261 US_FL_IGNORE_RESIDUE ),
1263 /* Reported by Benjamin Schiller <sbenni@gmx.de>
1264 * It is also sold by Easylite as DJ 20 */
1265 UNUSUAL_DEV( 0x0ed1, 0x7636, 0x0103, 0x0103,
1266 "Typhoon",
1267 "My DJ 1820",
1268 US_SC_DEVICE, US_PR_DEVICE, NULL,
1269 US_FL_IGNORE_RESIDUE | US_FL_GO_SLOW | US_FL_MAX_SECTORS_64),
1271 /* Patch by Leonid Petrov mail at lpetrov.net
1272 * Reported by Robert Spitzenpfeil <robert@spitzenpfeil.org>
1273 * http://www.qbik.ch/usb/devices/showdev.php?id=1705
1274 * Updated to 103 device by MJ Ray mjr at phonecoop.coop
1276 UNUSUAL_DEV( 0x0f19, 0x0103, 0x0100, 0x0100,
1277 "Oracom Co., Ltd",
1278 "ORC-200M",
1279 US_SC_DEVICE, US_PR_DEVICE, NULL,
1280 US_FL_IGNORE_RESIDUE ),
1282 /* David Kuehling <dvdkhlng@gmx.de>:
1283 * for MP3-Player AVOX WSX-300ER (bought in Japan). Reports lots of SCSI
1284 * errors when trying to write.
1286 UNUSUAL_DEV( 0x0f19, 0x0105, 0x0100, 0x0100,
1287 "C-MEX",
1288 "A-VOX",
1289 US_SC_DEVICE, US_PR_DEVICE, NULL,
1290 US_FL_IGNORE_RESIDUE ),
1292 /* Jeremy Katz <katzj@redhat.com>:
1293 * The Blackberry Pearl can run in two modes; a usb-storage only mode
1294 * and a mode that allows access via mass storage and to its database.
1295 * The berry_charge module will set the device to dual mode and thus we
1296 * should ignore its native mode if that module is built
1298 #ifdef CONFIG_USB_BERRY_CHARGE
1299 UNUSUAL_DEV( 0x0fca, 0x0006, 0x0001, 0x0001,
1300 "RIM",
1301 "Blackberry Pearl",
1302 US_SC_DEVICE, US_PR_DEVICE, NULL,
1303 US_FL_IGNORE_DEVICE ),
1304 #endif
1306 /* Reported by Michael Stattmann <michael@stattmann.com> */
1307 UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000,
1308 "Sony Ericsson",
1309 "V800-Vodafone 802",
1310 US_SC_DEVICE, US_PR_DEVICE, NULL,
1311 US_FL_NO_WP_DETECT ),
1313 /* Reported by The Solutor <thesolutor@gmail.com> */
1314 UNUSUAL_DEV( 0x0fce, 0xd0e1, 0x0000, 0x0000,
1315 "Sony Ericsson",
1316 "MD400",
1317 US_SC_DEVICE, US_PR_DEVICE, NULL,
1318 US_FL_IGNORE_DEVICE),
1320 /* Reported by Jan Mate <mate@fiit.stuba.sk>
1321 * and by Soeren Sonnenburg <kernel@nn7.de> */
1322 UNUSUAL_DEV( 0x0fce, 0xe030, 0x0000, 0x0000,
1323 "Sony Ericsson",
1324 "P990i",
1325 US_SC_DEVICE, US_PR_DEVICE, NULL,
1326 US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
1328 /* Reported by Emmanuel Vasilakis <evas@forthnet.gr> */
1329 UNUSUAL_DEV( 0x0fce, 0xe031, 0x0000, 0x0000,
1330 "Sony Ericsson",
1331 "M600i",
1332 US_SC_DEVICE, US_PR_DEVICE, NULL,
1333 US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
1335 /* Reported by Ricardo Barberis <ricardo@dattatec.com> */
1336 UNUSUAL_DEV( 0x0fce, 0xe092, 0x0000, 0x0000,
1337 "Sony Ericsson",
1338 "P1i",
1339 US_SC_DEVICE, US_PR_DEVICE, NULL,
1340 US_FL_IGNORE_RESIDUE ),
1342 /* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu>
1343 * Tested on hardware version 1.10.
1344 * Entry is needed only for the initializer function override.
1345 * Devices with bcd > 110 seem to not need it while those
1346 * with bcd < 110 appear to need it.
1348 UNUSUAL_DEV( 0x1019, 0x0c55, 0x0000, 0x0110,
1349 "Desknote",
1350 "UCR-61S2B",
1351 US_SC_DEVICE, US_PR_DEVICE, usb_stor_ucr61s2b_init,
1352 0 ),
1354 UNUSUAL_DEV( 0x1058, 0x0704, 0x0000, 0x9999,
1355 "Western Digital",
1356 "External HDD",
1357 US_SC_DEVICE, US_PR_DEVICE, NULL,
1358 US_FL_SANE_SENSE),
1360 /* Reported by Fabio Venturi <f.venturi@tdnet.it>
1361 * The device reports a vendor-specific bDeviceClass.
1363 UNUSUAL_DEV( 0x10d6, 0x2200, 0x0100, 0x0100,
1364 "Actions Semiconductor",
1365 "Mtp device",
1366 US_SC_DEVICE, US_PR_DEVICE, NULL,
1369 /* Reported by Pascal Terjan <pterjan@mandriva.com>
1370 * Ignore driver CD mode and force into modem mode by default.
1372 UNUSUAL_DEV( 0x1186, 0x3e04, 0x0000, 0x0000,
1373 "D-Link",
1374 "USB Mass Storage",
1375 US_SC_DEVICE, US_PR_DEVICE, option_ms_init, US_FL_IGNORE_DEVICE),
1377 /* Reported by Kevin Lloyd <linux@sierrawireless.com>
1378 * Entry is needed for the initializer function override,
1379 * which instructs the device to load as a modem
1380 * device.
1382 UNUSUAL_DEV( 0x1199, 0x0fff, 0x0000, 0x9999,
1383 "Sierra Wireless",
1384 "USB MMC Storage",
1385 US_SC_DEVICE, US_PR_DEVICE, sierra_ms_init,
1388 /* Reported by Jaco Kroon <jaco@kroon.co.za>
1389 * The usb-storage module found on the Digitech GNX4 (and supposedly other
1390 * devices) misbehaves and causes a bunch of invalid I/O errors.
1392 UNUSUAL_DEV( 0x1210, 0x0003, 0x0100, 0x0100,
1393 "Digitech HMG",
1394 "DigiTech Mass Storage",
1395 US_SC_DEVICE, US_PR_DEVICE, NULL,
1396 US_FL_IGNORE_RESIDUE ),
1398 /* Reported by fangxiaozhi <huananhu@huawei.com>
1399 * This brings the HUAWEI data card devices into multi-port mode
1401 UNUSUAL_DEV( 0x12d1, 0x1001, 0x0000, 0x0000,
1402 "HUAWEI MOBILE",
1403 "Mass Storage",
1404 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1406 UNUSUAL_DEV( 0x12d1, 0x1003, 0x0000, 0x0000,
1407 "HUAWEI MOBILE",
1408 "Mass Storage",
1409 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1411 UNUSUAL_DEV( 0x12d1, 0x1004, 0x0000, 0x0000,
1412 "HUAWEI MOBILE",
1413 "Mass Storage",
1414 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1416 UNUSUAL_DEV( 0x12d1, 0x1401, 0x0000, 0x0000,
1417 "HUAWEI MOBILE",
1418 "Mass Storage",
1419 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1421 UNUSUAL_DEV( 0x12d1, 0x1402, 0x0000, 0x0000,
1422 "HUAWEI MOBILE",
1423 "Mass Storage",
1424 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1426 UNUSUAL_DEV( 0x12d1, 0x1403, 0x0000, 0x0000,
1427 "HUAWEI MOBILE",
1428 "Mass Storage",
1429 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1431 UNUSUAL_DEV( 0x12d1, 0x1404, 0x0000, 0x0000,
1432 "HUAWEI MOBILE",
1433 "Mass Storage",
1434 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1436 UNUSUAL_DEV( 0x12d1, 0x1405, 0x0000, 0x0000,
1437 "HUAWEI MOBILE",
1438 "Mass Storage",
1439 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1441 UNUSUAL_DEV( 0x12d1, 0x1406, 0x0000, 0x0000,
1442 "HUAWEI MOBILE",
1443 "Mass Storage",
1444 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1446 UNUSUAL_DEV( 0x12d1, 0x1407, 0x0000, 0x0000,
1447 "HUAWEI MOBILE",
1448 "Mass Storage",
1449 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1451 UNUSUAL_DEV( 0x12d1, 0x1408, 0x0000, 0x0000,
1452 "HUAWEI MOBILE",
1453 "Mass Storage",
1454 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1456 UNUSUAL_DEV( 0x12d1, 0x1409, 0x0000, 0x0000,
1457 "HUAWEI MOBILE",
1458 "Mass Storage",
1459 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1461 UNUSUAL_DEV( 0x12d1, 0x140A, 0x0000, 0x0000,
1462 "HUAWEI MOBILE",
1463 "Mass Storage",
1464 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1466 UNUSUAL_DEV( 0x12d1, 0x140B, 0x0000, 0x0000,
1467 "HUAWEI MOBILE",
1468 "Mass Storage",
1469 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1471 UNUSUAL_DEV( 0x12d1, 0x140C, 0x0000, 0x0000,
1472 "HUAWEI MOBILE",
1473 "Mass Storage",
1474 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1476 UNUSUAL_DEV( 0x12d1, 0x140D, 0x0000, 0x0000,
1477 "HUAWEI MOBILE",
1478 "Mass Storage",
1479 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1481 UNUSUAL_DEV( 0x12d1, 0x140E, 0x0000, 0x0000,
1482 "HUAWEI MOBILE",
1483 "Mass Storage",
1484 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1486 UNUSUAL_DEV( 0x12d1, 0x140F, 0x0000, 0x0000,
1487 "HUAWEI MOBILE",
1488 "Mass Storage",
1489 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1491 UNUSUAL_DEV( 0x12d1, 0x1410, 0x0000, 0x0000,
1492 "HUAWEI MOBILE",
1493 "Mass Storage",
1494 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1496 UNUSUAL_DEV( 0x12d1, 0x1411, 0x0000, 0x0000,
1497 "HUAWEI MOBILE",
1498 "Mass Storage",
1499 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1501 UNUSUAL_DEV( 0x12d1, 0x1412, 0x0000, 0x0000,
1502 "HUAWEI MOBILE",
1503 "Mass Storage",
1504 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1506 UNUSUAL_DEV( 0x12d1, 0x1413, 0x0000, 0x0000,
1507 "HUAWEI MOBILE",
1508 "Mass Storage",
1509 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1511 UNUSUAL_DEV( 0x12d1, 0x1414, 0x0000, 0x0000,
1512 "HUAWEI MOBILE",
1513 "Mass Storage",
1514 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1516 UNUSUAL_DEV( 0x12d1, 0x1415, 0x0000, 0x0000,
1517 "HUAWEI MOBILE",
1518 "Mass Storage",
1519 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1521 UNUSUAL_DEV( 0x12d1, 0x1416, 0x0000, 0x0000,
1522 "HUAWEI MOBILE",
1523 "Mass Storage",
1524 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1526 UNUSUAL_DEV( 0x12d1, 0x1417, 0x0000, 0x0000,
1527 "HUAWEI MOBILE",
1528 "Mass Storage",
1529 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1531 UNUSUAL_DEV( 0x12d1, 0x1418, 0x0000, 0x0000,
1532 "HUAWEI MOBILE",
1533 "Mass Storage",
1534 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1536 UNUSUAL_DEV( 0x12d1, 0x1419, 0x0000, 0x0000,
1537 "HUAWEI MOBILE",
1538 "Mass Storage",
1539 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1541 UNUSUAL_DEV( 0x12d1, 0x141A, 0x0000, 0x0000,
1542 "HUAWEI MOBILE",
1543 "Mass Storage",
1544 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1546 UNUSUAL_DEV( 0x12d1, 0x141B, 0x0000, 0x0000,
1547 "HUAWEI MOBILE",
1548 "Mass Storage",
1549 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1551 UNUSUAL_DEV( 0x12d1, 0x141C, 0x0000, 0x0000,
1552 "HUAWEI MOBILE",
1553 "Mass Storage",
1554 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1556 UNUSUAL_DEV( 0x12d1, 0x141D, 0x0000, 0x0000,
1557 "HUAWEI MOBILE",
1558 "Mass Storage",
1559 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1561 UNUSUAL_DEV( 0x12d1, 0x141E, 0x0000, 0x0000,
1562 "HUAWEI MOBILE",
1563 "Mass Storage",
1564 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1566 UNUSUAL_DEV( 0x12d1, 0x141F, 0x0000, 0x0000,
1567 "HUAWEI MOBILE",
1568 "Mass Storage",
1569 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1571 UNUSUAL_DEV( 0x12d1, 0x1420, 0x0000, 0x0000,
1572 "HUAWEI MOBILE",
1573 "Mass Storage",
1574 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1576 UNUSUAL_DEV( 0x12d1, 0x1421, 0x0000, 0x0000,
1577 "HUAWEI MOBILE",
1578 "Mass Storage",
1579 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1581 UNUSUAL_DEV( 0x12d1, 0x1422, 0x0000, 0x0000,
1582 "HUAWEI MOBILE",
1583 "Mass Storage",
1584 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1586 UNUSUAL_DEV( 0x12d1, 0x1423, 0x0000, 0x0000,
1587 "HUAWEI MOBILE",
1588 "Mass Storage",
1589 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1591 UNUSUAL_DEV( 0x12d1, 0x1424, 0x0000, 0x0000,
1592 "HUAWEI MOBILE",
1593 "Mass Storage",
1594 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1596 UNUSUAL_DEV( 0x12d1, 0x1425, 0x0000, 0x0000,
1597 "HUAWEI MOBILE",
1598 "Mass Storage",
1599 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1601 UNUSUAL_DEV( 0x12d1, 0x1426, 0x0000, 0x0000,
1602 "HUAWEI MOBILE",
1603 "Mass Storage",
1604 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1606 UNUSUAL_DEV( 0x12d1, 0x1427, 0x0000, 0x0000,
1607 "HUAWEI MOBILE",
1608 "Mass Storage",
1609 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1611 UNUSUAL_DEV( 0x12d1, 0x1428, 0x0000, 0x0000,
1612 "HUAWEI MOBILE",
1613 "Mass Storage",
1614 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1616 UNUSUAL_DEV( 0x12d1, 0x1429, 0x0000, 0x0000,
1617 "HUAWEI MOBILE",
1618 "Mass Storage",
1619 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1621 UNUSUAL_DEV( 0x12d1, 0x142A, 0x0000, 0x0000,
1622 "HUAWEI MOBILE",
1623 "Mass Storage",
1624 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1626 UNUSUAL_DEV( 0x12d1, 0x142B, 0x0000, 0x0000,
1627 "HUAWEI MOBILE",
1628 "Mass Storage",
1629 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1631 UNUSUAL_DEV( 0x12d1, 0x142C, 0x0000, 0x0000,
1632 "HUAWEI MOBILE",
1633 "Mass Storage",
1634 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1636 UNUSUAL_DEV( 0x12d1, 0x142D, 0x0000, 0x0000,
1637 "HUAWEI MOBILE",
1638 "Mass Storage",
1639 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1641 UNUSUAL_DEV( 0x12d1, 0x142E, 0x0000, 0x0000,
1642 "HUAWEI MOBILE",
1643 "Mass Storage",
1644 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1646 UNUSUAL_DEV( 0x12d1, 0x142F, 0x0000, 0x0000,
1647 "HUAWEI MOBILE",
1648 "Mass Storage",
1649 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1651 UNUSUAL_DEV( 0x12d1, 0x1430, 0x0000, 0x0000,
1652 "HUAWEI MOBILE",
1653 "Mass Storage",
1654 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1656 UNUSUAL_DEV( 0x12d1, 0x1431, 0x0000, 0x0000,
1657 "HUAWEI MOBILE",
1658 "Mass Storage",
1659 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1661 UNUSUAL_DEV( 0x12d1, 0x1432, 0x0000, 0x0000,
1662 "HUAWEI MOBILE",
1663 "Mass Storage",
1664 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1666 UNUSUAL_DEV( 0x12d1, 0x1433, 0x0000, 0x0000,
1667 "HUAWEI MOBILE",
1668 "Mass Storage",
1669 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1671 UNUSUAL_DEV( 0x12d1, 0x1434, 0x0000, 0x0000,
1672 "HUAWEI MOBILE",
1673 "Mass Storage",
1674 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1676 UNUSUAL_DEV( 0x12d1, 0x1435, 0x0000, 0x0000,
1677 "HUAWEI MOBILE",
1678 "Mass Storage",
1679 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1681 UNUSUAL_DEV( 0x12d1, 0x1436, 0x0000, 0x0000,
1682 "HUAWEI MOBILE",
1683 "Mass Storage",
1684 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1686 UNUSUAL_DEV( 0x12d1, 0x1437, 0x0000, 0x0000,
1687 "HUAWEI MOBILE",
1688 "Mass Storage",
1689 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1691 UNUSUAL_DEV( 0x12d1, 0x1438, 0x0000, 0x0000,
1692 "HUAWEI MOBILE",
1693 "Mass Storage",
1694 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1696 UNUSUAL_DEV( 0x12d1, 0x1439, 0x0000, 0x0000,
1697 "HUAWEI MOBILE",
1698 "Mass Storage",
1699 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1701 UNUSUAL_DEV( 0x12d1, 0x143A, 0x0000, 0x0000,
1702 "HUAWEI MOBILE",
1703 "Mass Storage",
1704 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1706 UNUSUAL_DEV( 0x12d1, 0x143B, 0x0000, 0x0000,
1707 "HUAWEI MOBILE",
1708 "Mass Storage",
1709 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1711 UNUSUAL_DEV( 0x12d1, 0x143C, 0x0000, 0x0000,
1712 "HUAWEI MOBILE",
1713 "Mass Storage",
1714 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1716 UNUSUAL_DEV( 0x12d1, 0x143D, 0x0000, 0x0000,
1717 "HUAWEI MOBILE",
1718 "Mass Storage",
1719 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1721 UNUSUAL_DEV( 0x12d1, 0x143E, 0x0000, 0x0000,
1722 "HUAWEI MOBILE",
1723 "Mass Storage",
1724 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1726 UNUSUAL_DEV( 0x12d1, 0x143F, 0x0000, 0x0000,
1727 "HUAWEI MOBILE",
1728 "Mass Storage",
1729 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1732 /* Reported by Vilius Bilinkevicius <vilisas AT xxx DOT lt) */
1733 UNUSUAL_DEV( 0x132b, 0x000b, 0x0001, 0x0001,
1734 "Minolta",
1735 "Dimage Z10",
1736 US_SC_DEVICE, US_PR_DEVICE, NULL,
1737 0 ),
1739 /* Reported by Kotrla Vitezslav <kotrla@ceb.cz> */
1740 UNUSUAL_DEV( 0x1370, 0x6828, 0x0110, 0x0110,
1741 "SWISSBIT",
1742 "Black Silver",
1743 US_SC_DEVICE, US_PR_DEVICE, NULL,
1744 US_FL_IGNORE_RESIDUE ),
1746 /* Reported by Francesco Foresti <frafore@tiscali.it> */
1747 UNUSUAL_DEV( 0x14cd, 0x6600, 0x0201, 0x0201,
1748 "Super Top",
1749 "IDE DEVICE",
1750 US_SC_DEVICE, US_PR_DEVICE, NULL,
1751 US_FL_IGNORE_RESIDUE ),
1753 /* Reported by Alexandre Oliva <oliva@lsd.ic.unicamp.br>
1754 * JMicron responds to USN and several other SCSI ioctls with a
1755 * residue that causes subsequent I/O requests to fail. */
1756 UNUSUAL_DEV( 0x152d, 0x2329, 0x0100, 0x0100,
1757 "JMicron",
1758 "USB to ATA/ATAPI Bridge",
1759 US_SC_DEVICE, US_PR_DEVICE, NULL,
1760 US_FL_IGNORE_RESIDUE | US_FL_SANE_SENSE ),
1762 /* Reported by Robert Schedel <r.schedel@yahoo.de>
1763 * Note: this is a 'super top' device like the above 14cd/6600 device */
1764 UNUSUAL_DEV( 0x1652, 0x6600, 0x0201, 0x0201,
1765 "Teac",
1766 "HD-35PUK-B",
1767 US_SC_DEVICE, US_PR_DEVICE, NULL,
1768 US_FL_IGNORE_RESIDUE ),
1770 UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001,
1771 "ST",
1772 "2A",
1773 US_SC_DEVICE, US_PR_DEVICE, NULL,
1774 US_FL_FIX_CAPACITY),
1776 /* patch submitted by Davide Perini <perini.davide@dpsoftware.org>
1777 * and Renato Perini <rperini@email.it>
1779 UNUSUAL_DEV( 0x22b8, 0x3010, 0x0001, 0x0001,
1780 "Motorola",
1781 "RAZR V3x",
1782 US_SC_DEVICE, US_PR_DEVICE, NULL,
1783 US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
1786 * Patch by Constantin Baranov <const@tltsu.ru>
1787 * Report by Andreas Koenecke.
1788 * Motorola ROKR Z6.
1790 UNUSUAL_DEV( 0x22b8, 0x6426, 0x0101, 0x0101,
1791 "Motorola",
1792 "MSnc.",
1793 US_SC_DEVICE, US_PR_DEVICE, NULL,
1794 US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY | US_FL_BULK_IGNORE_TAG),
1796 /* Reported by Radovan Garabik <garabik@kassiopeia.juls.savba.sk> */
1797 UNUSUAL_DEV( 0x2735, 0x100b, 0x0000, 0x9999,
1798 "MPIO",
1799 "HS200",
1800 US_SC_DEVICE, US_PR_DEVICE, NULL,
1801 US_FL_GO_SLOW ),
1803 /* Reported by Rohan Hart <rohan.hart17@gmail.com> */
1804 UNUSUAL_DEV( 0x2770, 0x915d, 0x0010, 0x0010,
1805 "INTOVA",
1806 "Pixtreme",
1807 US_SC_DEVICE, US_PR_DEVICE, NULL,
1808 US_FL_FIX_CAPACITY ),
1810 /* Reported by Frederic Marchal <frederic.marchal@wowcompany.com>
1811 * Mio Moov 330
1813 UNUSUAL_DEV( 0x3340, 0xffff, 0x0000, 0x0000,
1814 "Mitac",
1815 "Mio DigiWalker USB Sync",
1816 US_SC_DEVICE,US_PR_DEVICE,NULL,
1817 US_FL_MAX_SECTORS_64 ),
1819 /* Reported by Andrey Rahmatullin <wrar@altlinux.org> */
1820 UNUSUAL_DEV( 0x4102, 0x1020, 0x0100, 0x0100,
1821 "iRiver",
1822 "MP3 T10",
1823 US_SC_DEVICE, US_PR_DEVICE, NULL,
1824 US_FL_IGNORE_RESIDUE ),
1826 /* Reported by Sergey Pinaev <dfo@antex.ru> */
1827 UNUSUAL_DEV( 0x4102, 0x1059, 0x0000, 0x0000,
1828 "iRiver",
1829 "P7K",
1830 US_SC_DEVICE, US_PR_DEVICE, NULL,
1831 US_FL_MAX_SECTORS_64 ),
1834 * David Härdeman <david@2gen.com>
1835 * The key makes the SCSI stack print confusing (but harmless) messages
1837 UNUSUAL_DEV( 0x4146, 0xba01, 0x0100, 0x0100,
1838 "Iomega",
1839 "Micro Mini 1GB",
1840 US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
1842 /* Reported by Andrew Simmons <andrew.simmons@gmail.com> */
1843 UNUSUAL_DEV( 0xed06, 0x4500, 0x0001, 0x0001,
1844 "DataStor",
1845 "USB4500 FW1.04",
1846 US_SC_DEVICE, US_PR_DEVICE, NULL,
1847 US_FL_CAPACITY_HEURISTICS),
1849 /* Reported by Alessio Treglia <quadrispro@ubuntu.com> */
1850 UNUSUAL_DEV( 0xed10, 0x7636, 0x0001, 0x0001,
1851 "TGE",
1852 "Digital MP3 Audio Player",
1853 US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
1855 /* Control/Bulk transport for all SubClass values */
1856 USUAL_DEV(US_SC_RBC, US_PR_CB, USB_US_TYPE_STOR),
1857 USUAL_DEV(US_SC_8020, US_PR_CB, USB_US_TYPE_STOR),
1858 USUAL_DEV(US_SC_QIC, US_PR_CB, USB_US_TYPE_STOR),
1859 USUAL_DEV(US_SC_UFI, US_PR_CB, USB_US_TYPE_STOR),
1860 USUAL_DEV(US_SC_8070, US_PR_CB, USB_US_TYPE_STOR),
1861 USUAL_DEV(US_SC_SCSI, US_PR_CB, USB_US_TYPE_STOR),
1863 /* Control/Bulk/Interrupt transport for all SubClass values */
1864 USUAL_DEV(US_SC_RBC, US_PR_CBI, USB_US_TYPE_STOR),
1865 USUAL_DEV(US_SC_8020, US_PR_CBI, USB_US_TYPE_STOR),
1866 USUAL_DEV(US_SC_QIC, US_PR_CBI, USB_US_TYPE_STOR),
1867 USUAL_DEV(US_SC_UFI, US_PR_CBI, USB_US_TYPE_STOR),
1868 USUAL_DEV(US_SC_8070, US_PR_CBI, USB_US_TYPE_STOR),
1869 USUAL_DEV(US_SC_SCSI, US_PR_CBI, USB_US_TYPE_STOR),
1871 /* Bulk-only transport for all SubClass values */
1872 USUAL_DEV(US_SC_RBC, US_PR_BULK, USB_US_TYPE_STOR),
1873 USUAL_DEV(US_SC_8020, US_PR_BULK, USB_US_TYPE_STOR),
1874 USUAL_DEV(US_SC_QIC, US_PR_BULK, USB_US_TYPE_STOR),
1875 USUAL_DEV(US_SC_UFI, US_PR_BULK, USB_US_TYPE_STOR),
1876 USUAL_DEV(US_SC_8070, US_PR_BULK, USB_US_TYPE_STOR),
1877 USUAL_DEV(US_SC_SCSI, US_PR_BULK, 0),