arch/arm/mach-imx/mach-pcm043.c

   1 /*
   2  *  Copyright (C) 2009 Sascha Hauer, Pengutronix
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License as published by
   6  * the Free Software Foundation; either version 2 of the License, or
   7  * (at your option) any later version.
   8  *
   9  * This program is distributed in the hope that it will be useful,
  10  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12  * GNU General Public License for more details.
  13  */
  14
  15 #include <linux/types.h>
  16 #include <linux/init.h>
  17
  18 #include <linux/platform_device.h>
  19 #include <linux/mtd/physmap.h>
  20 #include <linux/mtd/plat-ram.h>
  21 #include <linux/memory.h>
  22 #include <linux/gpio.h>
  23 #include <linux/smc911x.h>
  24 #include <linux/interrupt.h>
  25 #include <linux/delay.h>
  26 #include <linux/i2c.h>
  27 #include <linux/i2c/at24.h>
  28 #include <linux/usb/otg.h>
  29 #include <linux/usb/ulpi.h>
  30
  31 #include <asm/mach-types.h>
  32 #include <asm/mach/arch.h>
  33 #include <asm/mach/time.h>
  34 #include <asm/mach/map.h>
  35
  36 #include "common.h"
  37 #include "devices-imx35.h"
  38 #include "hardware.h"
  39 #include "iomux-mx35.h"
  40 #include "ulpi.h"
  41
  42 static const struct fb_videomode fb_modedb[] = {
  43         {
  44                 /* 240x320 @ 60 Hz */
  45                 .name           = "Sharp-LQ035Q7",
  46                 .refresh        = 60,
  47                 .xres           = 240,
  48                 .yres           = 320,
  49                 .pixclock       = 185925,
  50                 .left_margin    = 9,
  51                 .right_margin   = 16,
  52                 .upper_margin   = 7,
  53                 .lower_margin   = 9,
  54                 .hsync_len      = 1,
  55                 .vsync_len      = 1,
  56                 .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
  57                 .vmode          = FB_VMODE_NONINTERLACED,
  58                 .flag           = 0,
  59         }, {
  60                 /* 240x320 @ 60 Hz */
  61                 .name           = "TX090",
  62                 .refresh        = 60,
  63                 .xres           = 240,
  64                 .yres           = 320,
  65                 .pixclock       = 38255,
  66                 .left_margin    = 144,
  67                 .right_margin   = 0,
  68                 .upper_margin   = 7,
  69                 .lower_margin   = 40,
  70                 .hsync_len      = 96,
  71                 .vsync_len      = 1,
  72                 .sync           = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
  73                 .vmode          = FB_VMODE_NONINTERLACED,
  74                 .flag           = 0,
  75         },
  76 };
  77
  78 static struct mx3fb_platform_data mx3fb_pdata __initdata = {
  79         .name           = "Sharp-LQ035Q7",
  80         .mode           = fb_modedb,
  81         .num_modes      = ARRAY_SIZE(fb_modedb),
  82 };
  83
  84 static struct physmap_flash_data pcm043_flash_data = {
  85         .width  = 2,
  86 };
  87
  88 static struct resource pcm043_flash_resource = {
  89         .start  = 0xa0000000,
  90         .end    = 0xa1ffffff,
  91         .flags  = IORESOURCE_MEM,
  92 };
  93
  94 static struct platform_device pcm043_flash = {
  95         .name   = "physmap-flash",
  96         .id     = 0,
  97         .dev    = {
  98                 .platform_data  = &pcm043_flash_data,
  99         },
 100         .resource = &pcm043_flash_resource,
 101         .num_resources = 1,
 102 };
 103
 104 static const struct imxuart_platform_data uart_pdata __initconst = {
 105         .flags = IMXUART_HAVE_RTSCTS,
 106 };
 107
 108 static const struct imxi2c_platform_data pcm043_i2c0_data __initconst = {
 109         .bitrate = 50000,
 110 };
 111
 112 static struct at24_platform_data board_eeprom = {
 113         .byte_len = 4096,
 114         .page_size = 32,
 115         .flags = AT24_FLAG_ADDR16,
 116 };
 117
 118 static struct i2c_board_info pcm043_i2c_devices[] = {
 119         {
 120                 I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
 121                 .platform_data = &board_eeprom,
 122         }, {
 123                 I2C_BOARD_INFO("pcf8563", 0x51),
 124         },
 125 };
 126
 127 static struct platform_device *devices[] __initdata = {
 128         &pcm043_flash,
 129 };
 130
 131 static iomux_v3_cfg_t pcm043_pads[] = {
 132         /* UART1 */
 133         MX35_PAD_CTS1__UART1_CTS,
 134         MX35_PAD_RTS1__UART1_RTS,
 135         MX35_PAD_TXD1__UART1_TXD_MUX,
 136         MX35_PAD_RXD1__UART1_RXD_MUX,
 137         /* UART2 */
 138         MX35_PAD_CTS2__UART2_CTS,
 139         MX35_PAD_RTS2__UART2_RTS,
 140         MX35_PAD_TXD2__UART2_TXD_MUX,
 141         MX35_PAD_RXD2__UART2_RXD_MUX,
 142         /* FEC */
 143         MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
 144         MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
 145         MX35_PAD_FEC_RX_DV__FEC_RX_DV,
 146         MX35_PAD_FEC_COL__FEC_COL,
 147         MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
 148         MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
 149         MX35_PAD_FEC_TX_EN__FEC_TX_EN,
 150         MX35_PAD_FEC_MDC__FEC_MDC,
 151         MX35_PAD_FEC_MDIO__FEC_MDIO,
 152         MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
 153         MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
 154         MX35_PAD_FEC_CRS__FEC_CRS,
 155         MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
 156         MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
 157         MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
 158         MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
 159         MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
 160         MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
 161         /* I2C1 */
 162         MX35_PAD_I2C1_CLK__I2C1_SCL,
 163         MX35_PAD_I2C1_DAT__I2C1_SDA,
 164         /* Display */
 165         MX35_PAD_LD0__IPU_DISPB_DAT_0,
 166         MX35_PAD_LD1__IPU_DISPB_DAT_1,
 167         MX35_PAD_LD2__IPU_DISPB_DAT_2,
 168         MX35_PAD_LD3__IPU_DISPB_DAT_3,
 169         MX35_PAD_LD4__IPU_DISPB_DAT_4,
 170         MX35_PAD_LD5__IPU_DISPB_DAT_5,
 171         MX35_PAD_LD6__IPU_DISPB_DAT_6,
 172         MX35_PAD_LD7__IPU_DISPB_DAT_7,
 173         MX35_PAD_LD8__IPU_DISPB_DAT_8,
 174         MX35_PAD_LD9__IPU_DISPB_DAT_9,
 175         MX35_PAD_LD10__IPU_DISPB_DAT_10,
 176         MX35_PAD_LD11__IPU_DISPB_DAT_11,
 177         MX35_PAD_LD12__IPU_DISPB_DAT_12,
 178         MX35_PAD_LD13__IPU_DISPB_DAT_13,
 179         MX35_PAD_LD14__IPU_DISPB_DAT_14,
 180         MX35_PAD_LD15__IPU_DISPB_DAT_15,
 181         MX35_PAD_LD16__IPU_DISPB_DAT_16,
 182         MX35_PAD_LD17__IPU_DISPB_DAT_17,
 183         MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
 184         MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
 185         MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
 186         MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
 187         MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
 188         MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
 189         MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
 190         /* gpio */
 191         MX35_PAD_ATA_CS0__GPIO2_6,
 192         /* USB host */
 193         MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR,
 194         MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC,
 195         /* SSI */
 196         MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS,
 197         MX35_PAD_STXD4__AUDMUX_AUD4_TXD,
 198         MX35_PAD_SRXD4__AUDMUX_AUD4_RXD,
 199         MX35_PAD_SCK4__AUDMUX_AUD4_TXC,
 200         /* CAN2 */
 201         MX35_PAD_TX5_RX0__CAN2_TXCAN,
 202         MX35_PAD_TX4_RX1__CAN2_RXCAN,
 203         /* esdhc */
 204         MX35_PAD_SD1_CMD__ESDHC1_CMD,
 205         MX35_PAD_SD1_CLK__ESDHC1_CLK,
 206         MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
 207         MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
 208         MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
 209         MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
 210         MX35_PAD_ATA_DATA10__GPIO2_23, /* WriteProtect */
 211         MX35_PAD_ATA_DATA11__GPIO2_24, /* CardDetect */
 212 };
 213
 214 #define AC97_GPIO_TXFS  IMX_GPIO_NR(2, 31)
 215 #define AC97_GPIO_TXD   IMX_GPIO_NR(2, 28)
 216 #define AC97_GPIO_RESET IMX_GPIO_NR(2, 0)
 217 #define SD1_GPIO_WP     IMX_GPIO_NR(2, 23)
 218 #define SD1_GPIO_CD     IMX_GPIO_NR(2, 24)
 219
 220 static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
 221 {
 222         iomux_v3_cfg_t txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
 223         iomux_v3_cfg_t txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
 224         int ret;
 225
 226         ret = gpio_request(AC97_GPIO_TXFS, "SSI");
 227         if (ret) {
 228                 printk("failed to get GPIO_TXFS: %d\n", ret);
 229                 return;
 230         }
 231
 232         mxc_iomux_v3_setup_pad(txfs_gpio);
 233
 234         /* warm reset */
 235         gpio_direction_output(AC97_GPIO_TXFS, 1);
 236         udelay(2);
 237         gpio_set_value(AC97_GPIO_TXFS, 0);
 238
 239         gpio_free(AC97_GPIO_TXFS);
 240         mxc_iomux_v3_setup_pad(txfs);
 241 }
 242
 243 static void pcm043_ac97_cold_reset(struct snd_ac97 *ac97)
 244 {
 245         iomux_v3_cfg_t txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
 246         iomux_v3_cfg_t txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
 247         iomux_v3_cfg_t txd_gpio = MX35_PAD_STXD4__GPIO2_28;
 248         iomux_v3_cfg_t txd = MX35_PAD_STXD4__AUDMUX_AUD4_TXD;
 249         iomux_v3_cfg_t reset_gpio = MX35_PAD_SD2_CMD__GPIO2_0;
 250         int ret;
 251
 252         ret = gpio_request(AC97_GPIO_TXFS, "SSI");
 253         if (ret)
 254                 goto err1;
 255
 256         ret = gpio_request(AC97_GPIO_TXD, "SSI");
 257         if (ret)
 258                 goto err2;
 259
 260         ret = gpio_request(AC97_GPIO_RESET, "SSI");
 261         if (ret)
 262                 goto err3;
 263
 264         mxc_iomux_v3_setup_pad(txfs_gpio);
 265         mxc_iomux_v3_setup_pad(txd_gpio);
 266         mxc_iomux_v3_setup_pad(reset_gpio);
 267
 268         gpio_direction_output(AC97_GPIO_TXFS, 0);
 269         gpio_direction_output(AC97_GPIO_TXD, 0);
 270
 271         /* cold reset */
 272         gpio_direction_output(AC97_GPIO_RESET, 0);
 273         udelay(10);
 274         gpio_direction_output(AC97_GPIO_RESET, 1);
 275
 276         mxc_iomux_v3_setup_pad(txd);
 277         mxc_iomux_v3_setup_pad(txfs);
 278
 279         gpio_free(AC97_GPIO_RESET);
 280 err3:
 281         gpio_free(AC97_GPIO_TXD);
 282 err2:
 283         gpio_free(AC97_GPIO_TXFS);
 284 err1:
 285         if (ret)
 286                 printk("%s failed with %d\n", __func__, ret);
 287         mdelay(1);
 288 }
 289
 290 static const struct imx_ssi_platform_data pcm043_ssi_pdata __initconst = {
 291         .ac97_reset = pcm043_ac97_cold_reset,
 292         .ac97_warm_reset = pcm043_ac97_warm_reset,
 293         .flags = IMX_SSI_USE_AC97,
 294 };
 295
 296 static const struct mxc_nand_platform_data
 297 pcm037_nand_board_info __initconst = {
 298         .width = 1,
 299         .hw_ecc = 1,
 300 };
 301
 302 static int pcm043_otg_init(struct platform_device *pdev)
 303 {
 304         return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
 305 }
 306
 307 static struct mxc_usbh_platform_data otg_pdata __initdata = {
 308         .init   = pcm043_otg_init,
 309         .portsc = MXC_EHCI_MODE_UTMI,
 310 };
 311
 312 static int pcm043_usbh1_init(struct platform_device *pdev)
 313 {
 314         return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
 315                         MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN);
 316 }
 317
 318 static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
 319         .init   = pcm043_usbh1_init,
 320         .portsc = MXC_EHCI_MODE_SERIAL,
 321 };
 322
 323 static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
 324         .operating_mode = FSL_USB2_DR_DEVICE,
 325         .phy_mode       = FSL_USB2_PHY_UTMI,
 326 };
 327
 328 static bool otg_mode_host __initdata;
 329
 330 static int __init pcm043_otg_mode(char *options)
 331 {
 332         if (!strcmp(options, "host"))
 333                 otg_mode_host = true;
 334         else if (!strcmp(options, "device"))
 335                 otg_mode_host = false;
 336         else
 337                 pr_info("otg_mode neither \"host\" nor \"device\". "
 338                         "Defaulting to device\n");
 339         return 1;
 340 }
 341 __setup("otg_mode=", pcm043_otg_mode);
 342
 343 static struct esdhc_platform_data sd1_pdata = {
 344         .wp_gpio = SD1_GPIO_WP,
 345         .cd_gpio = SD1_GPIO_CD,
 346         .wp_type = ESDHC_WP_GPIO,
 347         .cd_type = ESDHC_CD_GPIO,
 348 };
 349
 350 /*
 351  * Board specific initialization.
 352  */
 353 static void __init pcm043_init(void)
 354 {
 355         imx35_soc_init();
 356
 357         mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
 358
 359         imx35_add_fec(NULL);
 360         platform_add_devices(devices, ARRAY_SIZE(devices));
 361         imx35_add_imx2_wdt();
 362
 363         imx35_add_imx_uart0(&uart_pdata);
 364         imx35_add_mxc_nand(&pcm037_nand_board_info);
 365         imx35_add_imx_ssi(0, &pcm043_ssi_pdata);
 366
 367         imx35_add_imx_uart1(&uart_pdata);
 368
 369         i2c_register_board_info(0, pcm043_i2c_devices,
 370                         ARRAY_SIZE(pcm043_i2c_devices));
 371
 372         imx35_add_imx_i2c0(&pcm043_i2c0_data);
 373
 374         imx35_add_ipu_core();
 375         imx35_add_mx3_sdc_fb(&mx3fb_pdata);
 376
 377         if (otg_mode_host) {
 378                 otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
 379                                 ULPI_OTG_DRVVBUS_EXT);
 380                 if (otg_pdata.otg)
 381                         imx35_add_mxc_ehci_otg(&otg_pdata);
 382         }
 383         imx35_add_mxc_ehci_hs(&usbh1_pdata);
 384
 385         if (!otg_mode_host)
 386                 imx35_add_fsl_usb2_udc(&otg_device_pdata);
 387
 388         imx35_add_flexcan1(NULL);
 389         imx35_add_sdhci_esdhc_imx(0, &sd1_pdata);
 390 }
 391
 392 static void __init pcm043_timer_init(void)
 393 {
 394         mx35_clocks_init();
 395 }
 396
 397 MACHINE_START(PCM043, "Phytec Phycore pcm043")
 398         /* Maintainer: Pengutronix */
 399         .atag_offset = 0x100,
 400         .map_io = mx35_map_io,
 401         .init_early = imx35_init_early,
 402         .init_irq = mx35_init_irq,
 403         .handle_irq = imx35_handle_irq,
 404         .init_time = pcm043_timer_init,
 405         .init_machine = pcm043_init,
 406         .restart        = mxc_restart,
 407 MACHINE_END