powerpc: Delete __cpuinit usage from all users
[linux/fpc-iii.git] / arch / mips / alchemy / board-gpr.c
blob9edc35ff8cf1420e9576f195f92658e71517c073
1 /*
2 * GPR board platform device registration (Au1550)
4 * Copyright (C) 2010 Wolfgang Grandegger <wg@denx.de>
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
21 #include <linux/delay.h>
22 #include <linux/init.h>
23 #include <linux/interrupt.h>
24 #include <linux/kernel.h>
25 #include <linux/platform_device.h>
26 #include <linux/pm.h>
27 #include <linux/mtd/partitions.h>
28 #include <linux/mtd/physmap.h>
29 #include <linux/leds.h>
30 #include <linux/gpio.h>
31 #include <linux/i2c.h>
32 #include <linux/i2c-gpio.h>
33 #include <asm/bootinfo.h>
34 #include <asm/idle.h>
35 #include <asm/reboot.h>
36 #include <asm/mach-au1x00/au1000.h>
37 #include <prom.h>
39 const char *get_system_type(void)
41 return "GPR";
44 void __init prom_init(void)
46 unsigned char *memsize_str;
47 unsigned long memsize;
49 prom_argc = fw_arg0;
50 prom_argv = (char **)fw_arg1;
51 prom_envp = (char **)fw_arg2;
53 prom_init_cmdline();
55 memsize_str = prom_getenv("memsize");
56 if (!memsize_str)
57 memsize = 0x04000000;
58 else
59 strict_strtoul(memsize_str, 0, &memsize);
60 add_memory_region(0, memsize, BOOT_MEM_RAM);
63 void prom_putchar(unsigned char c)
65 alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
68 static void gpr_reset(char *c)
70 /* switch System-LED to orange (red# and green# on) */
71 alchemy_gpio_direction_output(4, 0);
72 alchemy_gpio_direction_output(5, 0);
74 /* trigger watchdog to reset board in 200ms */
75 printk(KERN_EMERG "Triggering watchdog soft reset...\n");
76 raw_local_irq_disable();
77 alchemy_gpio_direction_output(1, 0);
78 udelay(1);
79 alchemy_gpio_set_value(1, 1);
80 while (1)
81 cpu_wait();
84 static void gpr_power_off(void)
86 while (1)
87 cpu_wait();
90 void __init board_setup(void)
92 printk(KERN_INFO "Trapeze ITS GPR board\n");
94 pm_power_off = gpr_power_off;
95 _machine_halt = gpr_power_off;
96 _machine_restart = gpr_reset;
98 /* Enable UART1/3 */
99 alchemy_uart_enable(AU1000_UART3_PHYS_ADDR);
100 alchemy_uart_enable(AU1000_UART1_PHYS_ADDR);
102 /* Take away Reset of UMTS-card */
103 alchemy_gpio_direction_output(215, 1);
107 * Watchdog
109 static struct resource gpr_wdt_resource[] = {
110 [0] = {
111 .start = 1,
112 .end = 1,
113 .name = "gpr-adm6320-wdt",
114 .flags = IORESOURCE_IRQ,
118 static struct platform_device gpr_wdt_device = {
119 .name = "adm6320-wdt",
120 .id = 0,
121 .num_resources = ARRAY_SIZE(gpr_wdt_resource),
122 .resource = gpr_wdt_resource,
126 * FLASH
128 * 0x00000000-0x00200000 : "kernel"
129 * 0x00200000-0x00a00000 : "rootfs"
130 * 0x01d00000-0x01f00000 : "config"
131 * 0x01c00000-0x01d00000 : "yamon"
132 * 0x01d00000-0x01d40000 : "yamon env vars"
133 * 0x00000000-0x00a00000 : "kernel+rootfs"
135 static struct mtd_partition gpr_mtd_partitions[] = {
137 .name = "kernel",
138 .size = 0x00200000,
139 .offset = 0,
142 .name = "rootfs",
143 .size = 0x00800000,
144 .offset = MTDPART_OFS_APPEND,
145 .mask_flags = MTD_WRITEABLE,
148 .name = "config",
149 .size = 0x00200000,
150 .offset = 0x01d00000,
153 .name = "yamon",
154 .size = 0x00100000,
155 .offset = 0x01c00000,
158 .name = "yamon env vars",
159 .size = 0x00040000,
160 .offset = MTDPART_OFS_APPEND,
163 .name = "kernel+rootfs",
164 .size = 0x00a00000,
165 .offset = 0,
169 static struct physmap_flash_data gpr_flash_data = {
170 .width = 4,
171 .nr_parts = ARRAY_SIZE(gpr_mtd_partitions),
172 .parts = gpr_mtd_partitions,
175 static struct resource gpr_mtd_resource = {
176 .start = 0x1e000000,
177 .end = 0x1fffffff,
178 .flags = IORESOURCE_MEM,
181 static struct platform_device gpr_mtd_device = {
182 .name = "physmap-flash",
183 .dev = {
184 .platform_data = &gpr_flash_data,
186 .num_resources = 1,
187 .resource = &gpr_mtd_resource,
191 * LEDs
193 static struct gpio_led gpr_gpio_leds[] = {
194 { /* green */
195 .name = "gpr:green",
196 .gpio = 4,
197 .active_low = 1,
199 { /* red */
200 .name = "gpr:red",
201 .gpio = 5,
202 .active_low = 1,
206 static struct gpio_led_platform_data gpr_led_data = {
207 .num_leds = ARRAY_SIZE(gpr_gpio_leds),
208 .leds = gpr_gpio_leds,
211 static struct platform_device gpr_led_devices = {
212 .name = "leds-gpio",
213 .id = -1,
214 .dev = {
215 .platform_data = &gpr_led_data,
220 * I2C
222 static struct i2c_gpio_platform_data gpr_i2c_data = {
223 .sda_pin = 209,
224 .sda_is_open_drain = 1,
225 .scl_pin = 210,
226 .scl_is_open_drain = 1,
227 .udelay = 2, /* ~100 kHz */
228 .timeout = HZ,
231 static struct platform_device gpr_i2c_device = {
232 .name = "i2c-gpio",
233 .id = -1,
234 .dev.platform_data = &gpr_i2c_data,
237 static struct i2c_board_info gpr_i2c_info[] __initdata = {
239 I2C_BOARD_INFO("lm83", 0x18),
240 .type = "lm83"
246 static struct resource alchemy_pci_host_res[] = {
247 [0] = {
248 .start = AU1500_PCI_PHYS_ADDR,
249 .end = AU1500_PCI_PHYS_ADDR + 0xfff,
250 .flags = IORESOURCE_MEM,
254 static int gpr_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
256 if ((slot == 0) && (pin == 1))
257 return AU1550_PCI_INTA;
258 else if ((slot == 0) && (pin == 2))
259 return AU1550_PCI_INTB;
261 return 0xff;
264 static struct alchemy_pci_platdata gpr_pci_pd = {
265 .board_map_irq = gpr_map_pci_irq,
266 .pci_cfg_set = PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H |
267 PCI_CONFIG_CH |
268 #if defined(__MIPSEB__)
269 PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM,
270 #else
272 #endif
275 static struct platform_device gpr_pci_host_dev = {
276 .dev.platform_data = &gpr_pci_pd,
277 .name = "alchemy-pci",
278 .id = 0,
279 .num_resources = ARRAY_SIZE(alchemy_pci_host_res),
280 .resource = alchemy_pci_host_res,
283 static struct platform_device *gpr_devices[] __initdata = {
284 &gpr_wdt_device,
285 &gpr_mtd_device,
286 &gpr_i2c_device,
287 &gpr_led_devices,
290 static int __init gpr_pci_init(void)
292 return platform_device_register(&gpr_pci_host_dev);
294 /* must be arch_initcall; MIPS PCI scans busses in a subsys_initcall */
295 arch_initcall(gpr_pci_init);
298 static int __init gpr_dev_init(void)
300 i2c_register_board_info(0, gpr_i2c_info, ARRAY_SIZE(gpr_i2c_info));
302 return platform_add_devices(gpr_devices, ARRAY_SIZE(gpr_devices));
304 device_initcall(gpr_dev_init);