2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
6 * Copyright (C) 1995 - 2000 by Ralf Baechle
8 #include <linux/signal.h>
9 #include <linux/sched.h>
10 #include <linux/interrupt.h>
11 #include <linux/kernel.h>
12 #include <linux/errno.h>
13 #include <linux/string.h>
14 #include <linux/types.h>
15 #include <linux/ptrace.h>
16 #include <linux/mman.h>
18 #include <linux/smp.h>
19 #include <linux/module.h>
20 #include <linux/kprobes.h>
21 #include <linux/perf_event.h>
23 #include <asm/branch.h>
24 #include <asm/mmu_context.h>
25 #include <asm/uaccess.h>
26 #include <asm/ptrace.h>
27 #include <asm/highmem.h> /* For VMALLOC_END */
28 #include <linux/kdebug.h>
31 * This routine handles page faults. It determines the address,
32 * and the problem, and then passes it off to one of the appropriate
35 asmlinkage
void __kprobes
do_page_fault(struct pt_regs
*regs
, unsigned long write
,
36 unsigned long address
)
38 struct vm_area_struct
* vma
= NULL
;
39 struct task_struct
*tsk
= current
;
40 struct mm_struct
*mm
= tsk
->mm
;
41 const int field
= sizeof(unsigned long) * 2;
44 unsigned int flags
= FAULT_FLAG_ALLOW_RETRY
| FAULT_FLAG_KILLABLE
|
45 (write
? FAULT_FLAG_WRITE
: 0);
48 printk("Cpu%d[%s:%d:%0*lx:%ld:%0*lx]\n", raw_smp_processor_id(),
49 current
->comm
, current
->pid
, field
, address
, write
,
50 field
, regs
->cp0_epc
);
55 * This is to notify the fault handler of the kprobes. The
56 * exception code is redundant as it is also carried in REGS,
57 * but we pass it anyhow.
59 if (notify_die(DIE_PAGE_FAULT
, "page fault", regs
, -1,
60 (regs
->cp0_cause
>> 2) & 0x1f, SIGSEGV
) == NOTIFY_STOP
)
64 info
.si_code
= SEGV_MAPERR
;
67 * We fault-in kernel-space virtual memory on-demand. The
68 * 'reference' page table is init_mm.pgd.
70 * NOTE! We MUST NOT take any locks for this case. We may
71 * be in an interrupt or a critical region, and should
72 * only copy the information from the master page table,
76 # define VMALLOC_FAULT_TARGET no_context
78 # define VMALLOC_FAULT_TARGET vmalloc_fault
81 if (unlikely(address
>= VMALLOC_START
&& address
<= VMALLOC_END
))
82 goto VMALLOC_FAULT_TARGET
;
84 if (unlikely(address
>= MODULE_START
&& address
< MODULE_END
))
85 goto VMALLOC_FAULT_TARGET
;
89 * If we're in an interrupt or have no user
90 * context, we must not take the fault..
92 if (in_atomic() || !mm
)
93 goto bad_area_nosemaphore
;
96 down_read(&mm
->mmap_sem
);
97 vma
= find_vma(mm
, address
);
100 if (vma
->vm_start
<= address
)
102 if (!(vma
->vm_flags
& VM_GROWSDOWN
))
104 if (expand_stack(vma
, address
))
107 * Ok, we have a good vm_area for this memory access, so
111 info
.si_code
= SEGV_ACCERR
;
114 if (!(vma
->vm_flags
& VM_WRITE
))
118 if (address
== regs
->cp0_epc
&& !(vma
->vm_flags
& VM_EXEC
)) {
120 pr_notice("Cpu%d[%s:%d:%0*lx:%ld:%0*lx] XI violation\n",
121 raw_smp_processor_id(),
122 current
->comm
, current
->pid
,
123 field
, address
, write
,
124 field
, regs
->cp0_epc
);
128 if (!(vma
->vm_flags
& VM_READ
)) {
130 pr_notice("Cpu%d[%s:%d:%0*lx:%ld:%0*lx] RI violation\n",
131 raw_smp_processor_id(),
132 current
->comm
, current
->pid
,
133 field
, address
, write
,
134 field
, regs
->cp0_epc
);
139 if (!(vma
->vm_flags
& (VM_READ
| VM_WRITE
| VM_EXEC
)))
145 * If for any reason at all we couldn't handle the fault,
146 * make sure we exit gracefully rather than endlessly redo
149 fault
= handle_mm_fault(mm
, vma
, address
, flags
);
151 if ((fault
& VM_FAULT_RETRY
) && fatal_signal_pending(current
))
154 perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS
, 1, regs
, address
);
155 if (unlikely(fault
& VM_FAULT_ERROR
)) {
156 if (fault
& VM_FAULT_OOM
)
158 else if (fault
& VM_FAULT_SIGBUS
)
162 if (flags
& FAULT_FLAG_ALLOW_RETRY
) {
163 if (fault
& VM_FAULT_MAJOR
) {
164 perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ
, 1,
168 perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN
, 1,
172 if (fault
& VM_FAULT_RETRY
) {
173 flags
&= ~FAULT_FLAG_ALLOW_RETRY
;
174 flags
|= FAULT_FLAG_TRIED
;
177 * No need to up_read(&mm->mmap_sem) as we would
178 * have already released it in __lock_page_or_retry
186 up_read(&mm
->mmap_sem
);
190 * Something tried to access memory that isn't in our memory map..
191 * Fix it, but check if it's kernel or user first..
194 up_read(&mm
->mmap_sem
);
196 bad_area_nosemaphore
:
197 /* User mode accesses just cause a SIGSEGV */
198 if (user_mode(regs
)) {
199 tsk
->thread
.cp0_badvaddr
= address
;
200 tsk
->thread
.error_code
= write
;
202 printk("do_page_fault() #2: sending SIGSEGV to %s for "
203 "invalid %s\n%0*lx (epc == %0*lx, ra == %0*lx)\n",
205 write
? "write access to" : "read access from",
207 field
, (unsigned long) regs
->cp0_epc
,
208 field
, (unsigned long) regs
->regs
[31]);
210 info
.si_signo
= SIGSEGV
;
212 /* info.si_code has been set above */
213 info
.si_addr
= (void __user
*) address
;
214 force_sig_info(SIGSEGV
, &info
, tsk
);
219 /* Are we prepared to handle this kernel fault? */
220 if (fixup_exception(regs
)) {
221 current
->thread
.cp0_baduaddr
= address
;
226 * Oops. The kernel tried to access some bad page. We'll have to
227 * terminate things with extreme prejudice.
231 printk(KERN_ALERT
"CPU %d Unable to handle kernel paging request at "
232 "virtual address %0*lx, epc == %0*lx, ra == %0*lx\n",
233 raw_smp_processor_id(), field
, address
, field
, regs
->cp0_epc
,
234 field
, regs
->regs
[31]);
239 * We ran out of memory, call the OOM killer, and return the userspace
240 * (which will retry the fault, or kill us if we got oom-killed).
242 up_read(&mm
->mmap_sem
);
243 pagefault_out_of_memory();
247 up_read(&mm
->mmap_sem
);
249 /* Kernel mode? Handle exceptions or die */
250 if (!user_mode(regs
))
254 * Send a sigbus, regardless of whether we were in kernel
258 printk("do_page_fault() #3: sending SIGBUS to %s for "
259 "invalid %s\n%0*lx (epc == %0*lx, ra == %0*lx)\n",
261 write
? "write access to" : "read access from",
263 field
, (unsigned long) regs
->cp0_epc
,
264 field
, (unsigned long) regs
->regs
[31]);
266 tsk
->thread
.cp0_badvaddr
= address
;
267 info
.si_signo
= SIGBUS
;
269 info
.si_code
= BUS_ADRERR
;
270 info
.si_addr
= (void __user
*) address
;
271 force_sig_info(SIGBUS
, &info
, tsk
);
278 * Synchronize this task's top level page-table
279 * with the 'reference' page table.
281 * Do _not_ use "tsk" here. We might be inside
282 * an interrupt in the middle of a task switch..
284 int offset
= __pgd_offset(address
);
290 pgd
= (pgd_t
*) pgd_current
[raw_smp_processor_id()] + offset
;
291 pgd_k
= init_mm
.pgd
+ offset
;
293 if (!pgd_present(*pgd_k
))
295 set_pgd(pgd
, *pgd_k
);
297 pud
= pud_offset(pgd
, address
);
298 pud_k
= pud_offset(pgd_k
, address
);
299 if (!pud_present(*pud_k
))
302 pmd
= pmd_offset(pud
, address
);
303 pmd_k
= pmd_offset(pud_k
, address
);
304 if (!pmd_present(*pmd_k
))
306 set_pmd(pmd
, *pmd_k
);
308 pte_k
= pte_offset_kernel(pmd_k
, address
);
309 if (!pte_present(*pte_k
))