drivers/usb/storage/datafab.c

   1 /* Driver for Datafab USB Compact Flash reader
   2  *
   3  * datafab driver v0.1:
   4  *
   5  * First release
   6  *
   7  * Current development and maintenance by:
   8  *   (c) 2000 Jimmie Mayfield (mayfield+datafab@sackheads.org)
   9  *
  10  *   Many thanks to Robert Baruch for the SanDisk SmartMedia reader driver
  11  *   which I used as a template for this driver.
  12  *
  13  *   Some bugfixes and scatter-gather code by Gregory P. Smith
  14  *   (greg-usb@electricrain.com)
  15  *
  16  *   Fix for media change by Joerg Schneider (js@joergschneider.com)
  17  *
  18  * Other contributors:
  19  *   (c) 2002 Alan Stern <stern@rowland.org>
  20  *
  21  * This program is free software; you can redistribute it and/or modify it
  22  * under the terms of the GNU General Public License as published by the
  23  * Free Software Foundation; either version 2, or (at your option) any
  24  * later version.
  25  *
  26  * This program is distributed in the hope that it will be useful, but
  27  * WITHOUT ANY WARRANTY; without even the implied warranty of
  28  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  29  * General Public License for more details.
  30  *
  31  * You should have received a copy of the GNU General Public License along
  32  * with this program; if not, write to the Free Software Foundation, Inc.,
  33  * 675 Mass Ave, Cambridge, MA 02139, USA.
  34  */
  35
  36 /*
  37  * This driver attempts to support USB CompactFlash reader/writer devices
  38  * based on Datafab USB-to-ATA chips.  It was specifically developed for the
  39  * Datafab MDCFE-B USB CompactFlash reader but has since been found to work
  40  * with a variety of Datafab-based devices from a number of manufacturers.
  41  * I've received a report of this driver working with a Datafab-based
  42  * SmartMedia device though please be aware that I'm personally unable to
  43  * test SmartMedia support.
  44  *
  45  * This driver supports reading and writing.  If you're truly paranoid,
  46  * however, you can force the driver into a write-protected state by setting
  47  * the WP enable bits in datafab_handle_mode_sense().  See the comments
  48  * in that routine.
  49  */
  50
  51 #include <linux/errno.h>
  52 #include <linux/module.h>
  53 #include <linux/slab.h>
  54
  55 #include <scsi/scsi.h>
  56 #include <scsi/scsi_cmnd.h>
  57
  58 #include "usb.h"
  59 #include "transport.h"
  60 #include "protocol.h"
  61 #include "debug.h"
  62
  63 MODULE_DESCRIPTION("Driver for Datafab USB Compact Flash reader");
  64 MODULE_AUTHOR("Jimmie Mayfield <mayfield+datafab@sackheads.org>");
  65 MODULE_LICENSE("GPL");
  66
  67 struct datafab_info {
  68         unsigned long   sectors;        /* total sector count */
  69         unsigned long   ssize;          /* sector size in bytes */
  70         signed char     lun;            /* used for dual-slot readers */
  71
  72         /* the following aren't used yet */
  73         unsigned char   sense_key;
  74         unsigned long   sense_asc;      /* additional sense code */
  75         unsigned long   sense_ascq;     /* additional sense code qualifier */
  76 };
  77
  78 static int datafab_determine_lun(struct us_data *us,
  79                                  struct datafab_info *info);
  80
  81
  82 /*
  83  * The table of devices
  84  */
  85 #define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
  86                     vendorName, productName, useProtocol, useTransport, \
  87                     initFunction, flags) \
  88 { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
  89   .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
  90
  91 struct usb_device_id datafab_usb_ids[] = {
  92 #       include "unusual_datafab.h"
  93         { }             /* Terminating entry */
  94 };
  95 MODULE_DEVICE_TABLE(usb, datafab_usb_ids);
  96
  97 #undef UNUSUAL_DEV
  98
  99 /*
 100  * The flags table
 101  */
 102 #define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
 103                     vendor_name, product_name, use_protocol, use_transport, \
 104                     init_function, Flags) \
 105 { \
 106         .vendorName = vendor_name,      \
 107         .productName = product_name,    \
 108         .useProtocol = use_protocol,    \
 109         .useTransport = use_transport,  \
 110         .initFunction = init_function,  \
 111 }
 112
 113 static struct us_unusual_dev datafab_unusual_dev_list[] = {
 114 #       include "unusual_datafab.h"
 115         { }             /* Terminating entry */
 116 };
 117
 118 #undef UNUSUAL_DEV
 119
 120
 121 static inline int
 122 datafab_bulk_read(struct us_data *us, unsigned char *data, unsigned int len) {
 123         if (len == 0)
 124                 return USB_STOR_XFER_GOOD;
 125
 126         US_DEBUGP("datafab_bulk_read:  len = %d\n", len);
 127         return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
 128                         data, len, NULL);
 129 }
 130
 131
 132 static inline int
 133 datafab_bulk_write(struct us_data *us, unsigned char *data, unsigned int len) {
 134         if (len == 0)
 135                 return USB_STOR_XFER_GOOD;
 136
 137         US_DEBUGP("datafab_bulk_write:  len = %d\n", len);
 138         return usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
 139                         data, len, NULL);
 140 }
 141
 142
 143 static int datafab_read_data(struct us_data *us,
 144                              struct datafab_info *info,
 145                              u32 sector,
 146                              u32 sectors)
 147 {
 148         unsigned char *command = us->iobuf;
 149         unsigned char *buffer;
 150         unsigned char  thistime;
 151         unsigned int totallen, alloclen;
 152         int len, result;
 153         unsigned int sg_offset = 0;
 154         struct scatterlist *sg = NULL;
 155
 156         // we're working in LBA mode.  according to the ATA spec,
 157         // we can support up to 28-bit addressing.  I don't know if Datafab
 158         // supports beyond 24-bit addressing.  It's kind of hard to test
 159         // since it requires > 8GB CF card.
 160         //
 161         if (sectors > 0x0FFFFFFF)
 162                 return USB_STOR_TRANSPORT_ERROR;
 163
 164         if (info->lun == -1) {
 165                 result = datafab_determine_lun(us, info);
 166                 if (result != USB_STOR_TRANSPORT_GOOD)
 167                         return result;
 168         }
 169
 170         totallen = sectors * info->ssize;
 171
 172         // Since we don't read more than 64 KB at a time, we have to create
 173         // a bounce buffer and move the data a piece at a time between the
 174         // bounce buffer and the actual transfer buffer.
 175
 176         alloclen = min(totallen, 65536u);
 177         buffer = kmalloc(alloclen, GFP_NOIO);
 178         if (buffer == NULL)
 179                 return USB_STOR_TRANSPORT_ERROR;
 180
 181         do {
 182                 // loop, never allocate or transfer more than 64k at once
 183                 // (min(128k, 255*info->ssize) is the real limit)
 184
 185                 len = min(totallen, alloclen);
 186                 thistime = (len / info->ssize) & 0xff;
 187
 188                 command[0] = 0;
 189                 command[1] = thistime;
 190                 command[2] = sector & 0xFF;
 191                 command[3] = (sector >> 8) & 0xFF;
 192                 command[4] = (sector >> 16) & 0xFF;
 193
 194                 command[5] = 0xE0 + (info->lun << 4);
 195                 command[5] |= (sector >> 24) & 0x0F;
 196                 command[6] = 0x20;
 197                 command[7] = 0x01;
 198
 199                 // send the read command
 200                 result = datafab_bulk_write(us, command, 8);
 201                 if (result != USB_STOR_XFER_GOOD)
 202                         goto leave;
 203
 204                 // read the result
 205                 result = datafab_bulk_read(us, buffer, len);
 206                 if (result != USB_STOR_XFER_GOOD)
 207                         goto leave;
 208
 209                 // Store the data in the transfer buffer
 210                 usb_stor_access_xfer_buf(buffer, len, us->srb,
 211                                  &sg, &sg_offset, TO_XFER_BUF);
 212
 213                 sector += thistime;
 214                 totallen -= len;
 215         } while (totallen > 0);
 216
 217         kfree(buffer);
 218         return USB_STOR_TRANSPORT_GOOD;
 219
 220  leave:
 221         kfree(buffer);
 222         return USB_STOR_TRANSPORT_ERROR;
 223 }
 224
 225
 226 static int datafab_write_data(struct us_data *us,
 227                               struct datafab_info *info,
 228                               u32 sector,
 229                               u32 sectors)
 230 {
 231         unsigned char *command = us->iobuf;
 232         unsigned char *reply = us->iobuf;
 233         unsigned char *buffer;
 234         unsigned char thistime;
 235         unsigned int totallen, alloclen;
 236         int len, result;
 237         unsigned int sg_offset = 0;
 238         struct scatterlist *sg = NULL;
 239
 240         // we're working in LBA mode.  according to the ATA spec,
 241         // we can support up to 28-bit addressing.  I don't know if Datafab
 242         // supports beyond 24-bit addressing.  It's kind of hard to test
 243         // since it requires > 8GB CF card.
 244         //
 245         if (sectors > 0x0FFFFFFF)
 246                 return USB_STOR_TRANSPORT_ERROR;
 247
 248         if (info->lun == -1) {
 249                 result = datafab_determine_lun(us, info);
 250                 if (result != USB_STOR_TRANSPORT_GOOD)
 251                         return result;
 252         }
 253
 254         totallen = sectors * info->ssize;
 255
 256         // Since we don't write more than 64 KB at a time, we have to create
 257         // a bounce buffer and move the data a piece at a time between the
 258         // bounce buffer and the actual transfer buffer.
 259
 260         alloclen = min(totallen, 65536u);
 261         buffer = kmalloc(alloclen, GFP_NOIO);
 262         if (buffer == NULL)
 263                 return USB_STOR_TRANSPORT_ERROR;
 264
 265         do {
 266                 // loop, never allocate or transfer more than 64k at once
 267                 // (min(128k, 255*info->ssize) is the real limit)
 268
 269                 len = min(totallen, alloclen);
 270                 thistime = (len / info->ssize) & 0xff;
 271
 272                 // Get the data from the transfer buffer
 273                 usb_stor_access_xfer_buf(buffer, len, us->srb,
 274                                 &sg, &sg_offset, FROM_XFER_BUF);
 275
 276                 command[0] = 0;
 277                 command[1] = thistime;
 278                 command[2] = sector & 0xFF;
 279                 command[3] = (sector >> 8) & 0xFF;
 280                 command[4] = (sector >> 16) & 0xFF;
 281
 282                 command[5] = 0xE0 + (info->lun << 4);
 283                 command[5] |= (sector >> 24) & 0x0F;
 284                 command[6] = 0x30;
 285                 command[7] = 0x02;
 286
 287                 // send the command
 288                 result = datafab_bulk_write(us, command, 8);
 289                 if (result != USB_STOR_XFER_GOOD)
 290                         goto leave;
 291
 292                 // send the data
 293                 result = datafab_bulk_write(us, buffer, len);
 294                 if (result != USB_STOR_XFER_GOOD)
 295                         goto leave;
 296
 297                 // read the result
 298                 result = datafab_bulk_read(us, reply, 2);
 299                 if (result != USB_STOR_XFER_GOOD)
 300                         goto leave;
 301
 302                 if (reply[0] != 0x50 && reply[1] != 0) {
 303                         US_DEBUGP("datafab_write_data:  Gah! "
 304                                   "write return code: %02x %02x\n",
 305                                   reply[0], reply[1]);
 306                         result = USB_STOR_TRANSPORT_ERROR;
 307                         goto leave;
 308                 }
 309
 310                 sector += thistime;
 311                 totallen -= len;
 312         } while (totallen > 0);
 313
 314         kfree(buffer);
 315         return USB_STOR_TRANSPORT_GOOD;
 316
 317  leave:
 318         kfree(buffer);
 319         return USB_STOR_TRANSPORT_ERROR;
 320 }
 321
 322
 323 static int datafab_determine_lun(struct us_data *us,
 324                                  struct datafab_info *info)
 325 {
 326         // Dual-slot readers can be thought of as dual-LUN devices.
 327         // We need to determine which card slot is being used.
 328         // We'll send an IDENTIFY DEVICE command and see which LUN responds...
 329         //
 330         // There might be a better way of doing this?
 331
 332         static unsigned char scommand[8] = { 0, 1, 0, 0, 0, 0xa0, 0xec, 1 };
 333         unsigned char *command = us->iobuf;
 334         unsigned char *buf;
 335         int count = 0, rc;
 336
 337         if (!info)
 338                 return USB_STOR_TRANSPORT_ERROR;
 339
 340         memcpy(command, scommand, 8);
 341         buf = kmalloc(512, GFP_NOIO);
 342         if (!buf)
 343                 return USB_STOR_TRANSPORT_ERROR;
 344
 345         US_DEBUGP("datafab_determine_lun:  locating...\n");
 346
 347         // we'll try 3 times before giving up...
 348         //
 349         while (count++ < 3) {
 350                 command[5] = 0xa0;
 351
 352                 rc = datafab_bulk_write(us, command, 8);
 353                 if (rc != USB_STOR_XFER_GOOD) {
 354                         rc = USB_STOR_TRANSPORT_ERROR;
 355                         goto leave;
 356                 }
 357
 358                 rc = datafab_bulk_read(us, buf, 512);
 359                 if (rc == USB_STOR_XFER_GOOD) {
 360                         info->lun = 0;
 361                         rc = USB_STOR_TRANSPORT_GOOD;
 362                         goto leave;
 363                 }
 364
 365                 command[5] = 0xb0;
 366
 367                 rc = datafab_bulk_write(us, command, 8);
 368                 if (rc != USB_STOR_XFER_GOOD) {
 369                         rc = USB_STOR_TRANSPORT_ERROR;
 370                         goto leave;
 371                 }
 372
 373                 rc = datafab_bulk_read(us, buf, 512);
 374                 if (rc == USB_STOR_XFER_GOOD) {
 375                         info->lun = 1;
 376                         rc = USB_STOR_TRANSPORT_GOOD;
 377                         goto leave;
 378                 }
 379
 380                 msleep(20);
 381         }
 382
 383         rc = USB_STOR_TRANSPORT_ERROR;
 384
 385  leave:
 386         kfree(buf);
 387         return rc;
 388 }
 389
 390 static int datafab_id_device(struct us_data *us,
 391                              struct datafab_info *info)
 392 {
 393         // this is a variation of the ATA "IDENTIFY DEVICE" command...according
 394         // to the ATA spec, 'Sector Count' isn't used but the Windows driver
 395         // sets this bit so we do too...
 396         //
 397         static unsigned char scommand[8] = { 0, 1, 0, 0, 0, 0xa0, 0xec, 1 };
 398         unsigned char *command = us->iobuf;
 399         unsigned char *reply;
 400         int rc;
 401
 402         if (!info)
 403                 return USB_STOR_TRANSPORT_ERROR;
 404
 405         if (info->lun == -1) {
 406                 rc = datafab_determine_lun(us, info);
 407                 if (rc != USB_STOR_TRANSPORT_GOOD)
 408                         return rc;
 409         }
 410
 411         memcpy(command, scommand, 8);
 412         reply = kmalloc(512, GFP_NOIO);
 413         if (!reply)
 414                 return USB_STOR_TRANSPORT_ERROR;
 415
 416         command[5] += (info->lun << 4);
 417
 418         rc = datafab_bulk_write(us, command, 8);
 419         if (rc != USB_STOR_XFER_GOOD) {
 420                 rc = USB_STOR_TRANSPORT_ERROR;
 421                 goto leave;
 422         }
 423
 424         // we'll go ahead and extract the media capacity while we're here...
 425         //
 426         rc = datafab_bulk_read(us, reply, 512);
 427         if (rc == USB_STOR_XFER_GOOD) {
 428                 // capacity is at word offset 57-58
 429                 //
 430                 info->sectors = ((u32)(reply[117]) << 24) |
 431                                 ((u32)(reply[116]) << 16) |
 432                                 ((u32)(reply[115]) <<  8) |
 433                                 ((u32)(reply[114])      );
 434                 rc = USB_STOR_TRANSPORT_GOOD;
 435                 goto leave;
 436         }
 437
 438         rc = USB_STOR_TRANSPORT_ERROR;
 439
 440  leave:
 441         kfree(reply);
 442         return rc;
 443 }
 444
 445
 446 static int datafab_handle_mode_sense(struct us_data *us,
 447                                      struct scsi_cmnd * srb,
 448                                      int sense_6)
 449 {
 450         static unsigned char rw_err_page[12] = {
 451                 0x1, 0xA, 0x21, 1, 0, 0, 0, 0, 1, 0, 0, 0
 452         };
 453         static unsigned char cache_page[12] = {
 454                 0x8, 0xA, 0x1, 0, 0, 0, 0, 0, 0, 0, 0, 0
 455         };
 456         static unsigned char rbac_page[12] = {
 457                 0x1B, 0xA, 0, 0x81, 0, 0, 0, 0, 0, 0, 0, 0
 458         };
 459         static unsigned char timer_page[8] = {
 460                 0x1C, 0x6, 0, 0, 0, 0
 461         };
 462         unsigned char pc, page_code;
 463         unsigned int i = 0;
 464         struct datafab_info *info = (struct datafab_info *) (us->extra);
 465         unsigned char *ptr = us->iobuf;
 466
 467         // most of this stuff is just a hack to get things working.  the
 468         // datafab reader doesn't present a SCSI interface so we
 469         // fudge the SCSI commands...
 470         //
 471
 472         pc = srb->cmnd[2] >> 6;
 473         page_code = srb->cmnd[2] & 0x3F;
 474
 475         switch (pc) {
 476            case 0x0:
 477                 US_DEBUGP("datafab_handle_mode_sense:  Current values\n");
 478                 break;
 479            case 0x1:
 480                 US_DEBUGP("datafab_handle_mode_sense:  Changeable values\n");
 481                 break;
 482            case 0x2:
 483                 US_DEBUGP("datafab_handle_mode_sense:  Default values\n");
 484                 break;
 485            case 0x3:
 486                 US_DEBUGP("datafab_handle_mode_sense:  Saves values\n");
 487                 break;
 488         }
 489
 490         memset(ptr, 0, 8);
 491         if (sense_6) {
 492                 ptr[2] = 0x00;          // WP enable: 0x80
 493                 i = 4;
 494         } else {
 495                 ptr[3] = 0x00;          // WP enable: 0x80
 496                 i = 8;
 497         }
 498
 499         switch (page_code) {
 500            default:
 501                 // vendor-specific mode
 502                 info->sense_key = 0x05;
 503                 info->sense_asc = 0x24;
 504                 info->sense_ascq = 0x00;
 505                 return USB_STOR_TRANSPORT_FAILED;
 506
 507            case 0x1:
 508                 memcpy(ptr + i, rw_err_page, sizeof(rw_err_page));
 509                 i += sizeof(rw_err_page);
 510                 break;
 511
 512            case 0x8:
 513                 memcpy(ptr + i, cache_page, sizeof(cache_page));
 514                 i += sizeof(cache_page);
 515                 break;
 516
 517            case 0x1B:
 518                 memcpy(ptr + i, rbac_page, sizeof(rbac_page));
 519                 i += sizeof(rbac_page);
 520                 break;
 521
 522            case 0x1C:
 523                 memcpy(ptr + i, timer_page, sizeof(timer_page));
 524                 i += sizeof(timer_page);
 525                 break;
 526
 527            case 0x3F:           // retrieve all pages
 528                 memcpy(ptr + i, timer_page, sizeof(timer_page));
 529                 i += sizeof(timer_page);
 530                 memcpy(ptr + i, rbac_page, sizeof(rbac_page));
 531                 i += sizeof(rbac_page);
 532                 memcpy(ptr + i, cache_page, sizeof(cache_page));
 533                 i += sizeof(cache_page);
 534                 memcpy(ptr + i, rw_err_page, sizeof(rw_err_page));
 535                 i += sizeof(rw_err_page);
 536                 break;
 537         }
 538
 539         if (sense_6)
 540                 ptr[0] = i - 1;
 541         else
 542                 ((__be16 *) ptr)[0] = cpu_to_be16(i - 2);
 543         usb_stor_set_xfer_buf(ptr, i, srb);
 544
 545         return USB_STOR_TRANSPORT_GOOD;
 546 }
 547
 548 static void datafab_info_destructor(void *extra)
 549 {
 550         // this routine is a placeholder...
 551         // currently, we don't allocate any extra memory so we're okay
 552 }
 553
 554
 555 // Transport for the Datafab MDCFE-B
 556 //
 557 static int datafab_transport(struct scsi_cmnd *srb, struct us_data *us)
 558 {
 559         struct datafab_info *info;
 560         int rc;
 561         unsigned long block, blocks;
 562         unsigned char *ptr = us->iobuf;
 563         static unsigned char inquiry_reply[8] = {
 564                 0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00
 565         };
 566
 567         if (!us->extra) {
 568                 us->extra = kzalloc(sizeof(struct datafab_info), GFP_NOIO);
 569                 if (!us->extra) {
 570                         US_DEBUGP("datafab_transport:  Gah! "
 571                                   "Can't allocate storage for Datafab info struct!\n");
 572                         return USB_STOR_TRANSPORT_ERROR;
 573                 }
 574                 us->extra_destructor = datafab_info_destructor;
 575                 ((struct datafab_info *)us->extra)->lun = -1;
 576         }
 577
 578         info = (struct datafab_info *) (us->extra);
 579
 580         if (srb->cmnd[0] == INQUIRY) {
 581                 US_DEBUGP("datafab_transport:  INQUIRY.  Returning bogus response");
 582                 memcpy(ptr, inquiry_reply, sizeof(inquiry_reply));
 583                 fill_inquiry_response(us, ptr, 36);
 584                 return USB_STOR_TRANSPORT_GOOD;
 585         }
 586
 587         if (srb->cmnd[0] == READ_CAPACITY) {
 588                 info->ssize = 0x200;  // hard coded 512 byte sectors as per ATA spec
 589                 rc = datafab_id_device(us, info);
 590                 if (rc != USB_STOR_TRANSPORT_GOOD)
 591                         return rc;
 592
 593                 US_DEBUGP("datafab_transport:  READ_CAPACITY:  %ld sectors, %ld bytes per sector\n",
 594                           info->sectors, info->ssize);
 595
 596                 // build the reply
 597                 // we need the last sector, not the number of sectors
 598                 ((__be32 *) ptr)[0] = cpu_to_be32(info->sectors - 1);
 599                 ((__be32 *) ptr)[1] = cpu_to_be32(info->ssize);
 600                 usb_stor_set_xfer_buf(ptr, 8, srb);
 601
 602                 return USB_STOR_TRANSPORT_GOOD;
 603         }
 604
 605         if (srb->cmnd[0] == MODE_SELECT_10) {
 606                 US_DEBUGP("datafab_transport:  Gah! MODE_SELECT_10.\n");
 607                 return USB_STOR_TRANSPORT_ERROR;
 608         }
 609
 610         // don't bother implementing READ_6 or WRITE_6.
 611         //
 612         if (srb->cmnd[0] == READ_10) {
 613                 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
 614                         ((u32)(srb->cmnd[4]) <<  8) | ((u32)(srb->cmnd[5]));
 615
 616                 blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8]));
 617
 618                 US_DEBUGP("datafab_transport:  READ_10: read block 0x%04lx  count %ld\n", block, blocks);
 619                 return datafab_read_data(us, info, block, blocks);
 620         }
 621
 622         if (srb->cmnd[0] == READ_12) {
 623                 // we'll probably never see a READ_12 but we'll do it anyway...
 624                 //
 625                 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
 626                         ((u32)(srb->cmnd[4]) <<  8) | ((u32)(srb->cmnd[5]));
 627
 628                 blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) |
 629                          ((u32)(srb->cmnd[8]) <<  8) | ((u32)(srb->cmnd[9]));
 630
 631                 US_DEBUGP("datafab_transport:  READ_12: read block 0x%04lx  count %ld\n", block, blocks);
 632                 return datafab_read_data(us, info, block, blocks);
 633         }
 634
 635         if (srb->cmnd[0] == WRITE_10) {
 636                 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
 637                         ((u32)(srb->cmnd[4]) <<  8) | ((u32)(srb->cmnd[5]));
 638
 639                 blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8]));
 640
 641                 US_DEBUGP("datafab_transport:  WRITE_10: write block 0x%04lx  count %ld\n", block, blocks);
 642                 return datafab_write_data(us, info, block, blocks);
 643         }
 644
 645         if (srb->cmnd[0] == WRITE_12) {
 646                 // we'll probably never see a WRITE_12 but we'll do it anyway...
 647                 //
 648                 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
 649                         ((u32)(srb->cmnd[4]) <<  8) | ((u32)(srb->cmnd[5]));
 650
 651                 blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) |
 652                          ((u32)(srb->cmnd[8]) <<  8) | ((u32)(srb->cmnd[9]));
 653
 654                 US_DEBUGP("datafab_transport:  WRITE_12: write block 0x%04lx  count %ld\n", block, blocks);
 655                 return datafab_write_data(us, info, block, blocks);
 656         }
 657
 658         if (srb->cmnd[0] == TEST_UNIT_READY) {
 659                 US_DEBUGP("datafab_transport:  TEST_UNIT_READY.\n");
 660                 return datafab_id_device(us, info);
 661         }
 662
 663         if (srb->cmnd[0] == REQUEST_SENSE) {
 664                 US_DEBUGP("datafab_transport:  REQUEST_SENSE.  Returning faked response\n");
 665
 666                 // this response is pretty bogus right now.  eventually if necessary
 667                 // we can set the correct sense data.  so far though it hasn't been
 668                 // necessary
 669                 //
 670                 memset(ptr, 0, 18);
 671                 ptr[0] = 0xF0;
 672                 ptr[2] = info->sense_key;
 673                 ptr[7] = 11;
 674                 ptr[12] = info->sense_asc;
 675                 ptr[13] = info->sense_ascq;
 676                 usb_stor_set_xfer_buf(ptr, 18, srb);
 677
 678                 return USB_STOR_TRANSPORT_GOOD;
 679         }
 680
 681         if (srb->cmnd[0] == MODE_SENSE) {
 682                 US_DEBUGP("datafab_transport:  MODE_SENSE_6 detected\n");
 683                 return datafab_handle_mode_sense(us, srb, 1);
 684         }
 685
 686         if (srb->cmnd[0] == MODE_SENSE_10) {
 687                 US_DEBUGP("datafab_transport:  MODE_SENSE_10 detected\n");
 688                 return datafab_handle_mode_sense(us, srb, 0);
 689         }
 690
 691         if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
 692                 // sure.  whatever.  not like we can stop the user from
 693                 // popping the media out of the device (no locking doors, etc)
 694                 //
 695                 return USB_STOR_TRANSPORT_GOOD;
 696         }
 697
 698         if (srb->cmnd[0] == START_STOP) {
 699                 /* this is used by sd.c'check_scsidisk_media_change to detect
 700                    media change */
 701                 US_DEBUGP("datafab_transport:  START_STOP.\n");
 702                 /* the first datafab_id_device after a media change returns
 703                    an error (determined experimentally) */
 704                 rc = datafab_id_device(us, info);
 705                 if (rc == USB_STOR_TRANSPORT_GOOD) {
 706                         info->sense_key = NO_SENSE;
 707                         srb->result = SUCCESS;
 708                 } else {
 709                         info->sense_key = UNIT_ATTENTION;
 710                         srb->result = SAM_STAT_CHECK_CONDITION;
 711                 }
 712                 return rc;
 713         }
 714
 715         US_DEBUGP("datafab_transport:  Gah! Unknown command: %d (0x%x)\n",
 716                   srb->cmnd[0], srb->cmnd[0]);
 717         info->sense_key = 0x05;
 718         info->sense_asc = 0x20;
 719         info->sense_ascq = 0x00;
 720         return USB_STOR_TRANSPORT_FAILED;
 721 }
 722
 723 static int datafab_probe(struct usb_interface *intf,
 724                          const struct usb_device_id *id)
 725 {
 726         struct us_data *us;
 727         int result;
 728
 729         result = usb_stor_probe1(&us, intf, id,
 730                         (id - datafab_usb_ids) + datafab_unusual_dev_list);
 731         if (result)
 732                 return result;
 733
 734         us->transport_name  = "Datafab Bulk-Only";
 735         us->transport = datafab_transport;
 736         us->transport_reset = usb_stor_Bulk_reset;
 737         us->max_lun = 1;
 738
 739         result = usb_stor_probe2(us);
 740         return result;
 741 }
 742
 743 static struct usb_driver datafab_driver = {
 744         .name =         "ums-datafab",
 745         .probe =        datafab_probe,
 746         .disconnect =   usb_stor_disconnect,
 747         .suspend =      usb_stor_suspend,
 748         .resume =       usb_stor_resume,
 749         .reset_resume = usb_stor_reset_resume,
 750         .pre_reset =    usb_stor_pre_reset,
 751         .post_reset =   usb_stor_post_reset,
 752         .id_table =     datafab_usb_ids,
 753         .soft_unbind =  1,
 754 };
 755
 756 static int __init datafab_init(void)
 757 {
 758         return usb_register(&datafab_driver);
 759 }
 760
 761 static void __exit datafab_exit(void)
 762 {
 763         usb_deregister(&datafab_driver);
 764 }
 765
 766 module_init(datafab_init);
 767 module_exit(datafab_exit);