hostap: add Netgear MA401 card
[linux/fpc-iii.git] / drivers / gpio / gpio-generic.c
blobd2196bf738471fff1de061a2bbbeafee95b444f3
1 /*
2 * Generic driver for memory-mapped GPIO controllers.
4 * Copyright 2008 MontaVista Software, Inc.
5 * Copyright 2008,2010 Anton Vorontsov <cbouatmailru@gmail.com>
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License as published by the
9 * Free Software Foundation; either version 2 of the License, or (at your
10 * option) any later version.
12 * ....``.```~~~~````.`.`.`.`.```````'',,,.........`````......`.......
13 * ...`` ```````..
14 * ..The simplest form of a GPIO controller that the driver supports is``
15 * `.just a single "data" register, where GPIO state can be read and/or `
16 * `,..written. ,,..``~~~~ .....``.`.`.~~.```.`.........``````.```````
17 * `````````
18 ___
19 _/~~|___/~| . ```~~~~~~ ___/___\___ ,~.`.`.`.`````.~~...,,,,...
20 __________|~$@~~~ %~ /o*o*o*o*o*o\ .. Implementing such a GPIO .
21 o ` ~~~~\___/~~~~ ` controller in FPGA is ,.`
22 `....trivial..'~`.```.```
23 * ```````
24 * .```````~~~~`..`.``.``.
25 * . The driver supports `... ,..```.`~~~```````````````....````.``,,
26 * . big-endian notation, just`. .. A bit more sophisticated controllers ,
27 * . register the device with -be`. .with a pair of set/clear-bit registers ,
28 * `.. suffix. ```~~`````....`.` . affecting the data register and the .`
29 * ``.`.``...``` ```.. output pins are also supported.`
30 * ^^ `````.`````````.,``~``~``~~``````
31 * . ^^
32 * ,..`.`.`...````````````......`.`.`.`.`.`..`.`.`..
33 * .. The expectation is that in at least some cases . ,-~~~-,
34 * .this will be used with roll-your-own ASIC/FPGA .` \ /
35 * .logic in Verilog or VHDL. ~~~`````````..`````~~` \ /
36 * ..````````......``````````` \o_
37 * |
38 * ^^ / \
40 * ...`````~~`.....``.`..........``````.`.``.```........``.
41 * ` 8, 16, 32 and 64 bits registers are supported, and``.
42 * . the number of GPIOs is determined by the width of ~
43 * .. the registers. ,............```.`.`..`.`.~~~.`.`.`~
44 * `.......````.```
47 #include <linux/init.h>
48 #include <linux/err.h>
49 #include <linux/bug.h>
50 #include <linux/kernel.h>
51 #include <linux/module.h>
52 #include <linux/spinlock.h>
53 #include <linux/compiler.h>
54 #include <linux/types.h>
55 #include <linux/errno.h>
56 #include <linux/log2.h>
57 #include <linux/ioport.h>
58 #include <linux/io.h>
59 #include <linux/gpio.h>
60 #include <linux/slab.h>
61 #include <linux/platform_device.h>
62 #include <linux/mod_devicetable.h>
63 #include <linux/basic_mmio_gpio.h>
65 static void bgpio_write8(void __iomem *reg, unsigned long data)
67 writeb(data, reg);
70 static unsigned long bgpio_read8(void __iomem *reg)
72 return readb(reg);
75 static void bgpio_write16(void __iomem *reg, unsigned long data)
77 writew(data, reg);
80 static unsigned long bgpio_read16(void __iomem *reg)
82 return readw(reg);
85 static void bgpio_write32(void __iomem *reg, unsigned long data)
87 writel(data, reg);
90 static unsigned long bgpio_read32(void __iomem *reg)
92 return readl(reg);
95 #if BITS_PER_LONG >= 64
96 static void bgpio_write64(void __iomem *reg, unsigned long data)
98 writeq(data, reg);
101 static unsigned long bgpio_read64(void __iomem *reg)
103 return readq(reg);
105 #endif /* BITS_PER_LONG >= 64 */
107 static void bgpio_write16be(void __iomem *reg, unsigned long data)
109 iowrite16be(data, reg);
112 static unsigned long bgpio_read16be(void __iomem *reg)
114 return ioread16be(reg);
117 static void bgpio_write32be(void __iomem *reg, unsigned long data)
119 iowrite32be(data, reg);
122 static unsigned long bgpio_read32be(void __iomem *reg)
124 return ioread32be(reg);
127 static unsigned long bgpio_pin2mask(struct bgpio_chip *bgc, unsigned int pin)
129 return 1 << pin;
132 static unsigned long bgpio_pin2mask_be(struct bgpio_chip *bgc,
133 unsigned int pin)
135 return 1 << (bgc->bits - 1 - pin);
138 static int bgpio_get(struct gpio_chip *gc, unsigned int gpio)
140 struct bgpio_chip *bgc = to_bgpio_chip(gc);
142 return bgc->read_reg(bgc->reg_dat) & bgc->pin2mask(bgc, gpio);
145 static void bgpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
147 struct bgpio_chip *bgc = to_bgpio_chip(gc);
148 unsigned long mask = bgc->pin2mask(bgc, gpio);
149 unsigned long flags;
151 spin_lock_irqsave(&bgc->lock, flags);
153 if (val)
154 bgc->data |= mask;
155 else
156 bgc->data &= ~mask;
158 bgc->write_reg(bgc->reg_dat, bgc->data);
160 spin_unlock_irqrestore(&bgc->lock, flags);
163 static void bgpio_set_with_clear(struct gpio_chip *gc, unsigned int gpio,
164 int val)
166 struct bgpio_chip *bgc = to_bgpio_chip(gc);
167 unsigned long mask = bgc->pin2mask(bgc, gpio);
169 if (val)
170 bgc->write_reg(bgc->reg_set, mask);
171 else
172 bgc->write_reg(bgc->reg_clr, mask);
175 static void bgpio_set_set(struct gpio_chip *gc, unsigned int gpio, int val)
177 struct bgpio_chip *bgc = to_bgpio_chip(gc);
178 unsigned long mask = bgc->pin2mask(bgc, gpio);
179 unsigned long flags;
181 spin_lock_irqsave(&bgc->lock, flags);
183 if (val)
184 bgc->data |= mask;
185 else
186 bgc->data &= ~mask;
188 bgc->write_reg(bgc->reg_set, bgc->data);
190 spin_unlock_irqrestore(&bgc->lock, flags);
193 static int bgpio_simple_dir_in(struct gpio_chip *gc, unsigned int gpio)
195 return 0;
198 static int bgpio_simple_dir_out(struct gpio_chip *gc, unsigned int gpio,
199 int val)
201 gc->set(gc, gpio, val);
203 return 0;
206 static int bgpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
208 struct bgpio_chip *bgc = to_bgpio_chip(gc);
209 unsigned long flags;
211 spin_lock_irqsave(&bgc->lock, flags);
213 bgc->dir &= ~bgc->pin2mask(bgc, gpio);
214 bgc->write_reg(bgc->reg_dir, bgc->dir);
216 spin_unlock_irqrestore(&bgc->lock, flags);
218 return 0;
221 static int bgpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
223 struct bgpio_chip *bgc = to_bgpio_chip(gc);
224 unsigned long flags;
226 gc->set(gc, gpio, val);
228 spin_lock_irqsave(&bgc->lock, flags);
230 bgc->dir |= bgc->pin2mask(bgc, gpio);
231 bgc->write_reg(bgc->reg_dir, bgc->dir);
233 spin_unlock_irqrestore(&bgc->lock, flags);
235 return 0;
238 static int bgpio_dir_in_inv(struct gpio_chip *gc, unsigned int gpio)
240 struct bgpio_chip *bgc = to_bgpio_chip(gc);
241 unsigned long flags;
243 spin_lock_irqsave(&bgc->lock, flags);
245 bgc->dir |= bgc->pin2mask(bgc, gpio);
246 bgc->write_reg(bgc->reg_dir, bgc->dir);
248 spin_unlock_irqrestore(&bgc->lock, flags);
250 return 0;
253 static int bgpio_dir_out_inv(struct gpio_chip *gc, unsigned int gpio, int val)
255 struct bgpio_chip *bgc = to_bgpio_chip(gc);
256 unsigned long flags;
258 gc->set(gc, gpio, val);
260 spin_lock_irqsave(&bgc->lock, flags);
262 bgc->dir &= ~bgc->pin2mask(bgc, gpio);
263 bgc->write_reg(bgc->reg_dir, bgc->dir);
265 spin_unlock_irqrestore(&bgc->lock, flags);
267 return 0;
270 static int bgpio_setup_accessors(struct device *dev,
271 struct bgpio_chip *bgc,
272 bool bit_be,
273 bool byte_be)
276 switch (bgc->bits) {
277 case 8:
278 bgc->read_reg = bgpio_read8;
279 bgc->write_reg = bgpio_write8;
280 break;
281 case 16:
282 if (byte_be) {
283 bgc->read_reg = bgpio_read16be;
284 bgc->write_reg = bgpio_write16be;
285 } else {
286 bgc->read_reg = bgpio_read16;
287 bgc->write_reg = bgpio_write16;
289 break;
290 case 32:
291 if (byte_be) {
292 bgc->read_reg = bgpio_read32be;
293 bgc->write_reg = bgpio_write32be;
294 } else {
295 bgc->read_reg = bgpio_read32;
296 bgc->write_reg = bgpio_write32;
298 break;
299 #if BITS_PER_LONG >= 64
300 case 64:
301 if (byte_be) {
302 dev_err(dev,
303 "64 bit big endian byte order unsupported\n");
304 return -EINVAL;
305 } else {
306 bgc->read_reg = bgpio_read64;
307 bgc->write_reg = bgpio_write64;
309 break;
310 #endif /* BITS_PER_LONG >= 64 */
311 default:
312 dev_err(dev, "unsupported data width %u bits\n", bgc->bits);
313 return -EINVAL;
316 bgc->pin2mask = bit_be ? bgpio_pin2mask_be : bgpio_pin2mask;
318 return 0;
322 * Create the device and allocate the resources. For setting GPIO's there are
323 * three supported configurations:
325 * - single input/output register resource (named "dat").
326 * - set/clear pair (named "set" and "clr").
327 * - single output register resource and single input resource ("set" and
328 * dat").
330 * For the single output register, this drives a 1 by setting a bit and a zero
331 * by clearing a bit. For the set clr pair, this drives a 1 by setting a bit
332 * in the set register and clears it by setting a bit in the clear register.
333 * The configuration is detected by which resources are present.
335 * For setting the GPIO direction, there are three supported configurations:
337 * - simple bidirection GPIO that requires no configuration.
338 * - an output direction register (named "dirout") where a 1 bit
339 * indicates the GPIO is an output.
340 * - an input direction register (named "dirin") where a 1 bit indicates
341 * the GPIO is an input.
343 static int bgpio_setup_io(struct bgpio_chip *bgc,
344 void __iomem *dat,
345 void __iomem *set,
346 void __iomem *clr)
349 bgc->reg_dat = dat;
350 if (!bgc->reg_dat)
351 return -EINVAL;
353 if (set && clr) {
354 bgc->reg_set = set;
355 bgc->reg_clr = clr;
356 bgc->gc.set = bgpio_set_with_clear;
357 } else if (set && !clr) {
358 bgc->reg_set = set;
359 bgc->gc.set = bgpio_set_set;
360 } else {
361 bgc->gc.set = bgpio_set;
364 bgc->gc.get = bgpio_get;
366 return 0;
369 static int bgpio_setup_direction(struct bgpio_chip *bgc,
370 void __iomem *dirout,
371 void __iomem *dirin)
373 if (dirout && dirin) {
374 return -EINVAL;
375 } else if (dirout) {
376 bgc->reg_dir = dirout;
377 bgc->gc.direction_output = bgpio_dir_out;
378 bgc->gc.direction_input = bgpio_dir_in;
379 } else if (dirin) {
380 bgc->reg_dir = dirin;
381 bgc->gc.direction_output = bgpio_dir_out_inv;
382 bgc->gc.direction_input = bgpio_dir_in_inv;
383 } else {
384 bgc->gc.direction_output = bgpio_simple_dir_out;
385 bgc->gc.direction_input = bgpio_simple_dir_in;
388 return 0;
391 int bgpio_remove(struct bgpio_chip *bgc)
393 return gpiochip_remove(&bgc->gc);
395 EXPORT_SYMBOL_GPL(bgpio_remove);
397 int bgpio_init(struct bgpio_chip *bgc, struct device *dev,
398 unsigned long sz, void __iomem *dat, void __iomem *set,
399 void __iomem *clr, void __iomem *dirout, void __iomem *dirin,
400 unsigned long flags)
402 int ret;
404 if (!is_power_of_2(sz))
405 return -EINVAL;
407 bgc->bits = sz * 8;
408 if (bgc->bits > BITS_PER_LONG)
409 return -EINVAL;
411 spin_lock_init(&bgc->lock);
412 bgc->gc.dev = dev;
413 bgc->gc.label = dev_name(dev);
414 bgc->gc.base = -1;
415 bgc->gc.ngpio = bgc->bits;
417 ret = bgpio_setup_io(bgc, dat, set, clr);
418 if (ret)
419 return ret;
421 ret = bgpio_setup_accessors(dev, bgc, flags & BGPIOF_BIG_ENDIAN,
422 flags & BGPIOF_BIG_ENDIAN_BYTE_ORDER);
423 if (ret)
424 return ret;
426 ret = bgpio_setup_direction(bgc, dirout, dirin);
427 if (ret)
428 return ret;
430 bgc->data = bgc->read_reg(bgc->reg_dat);
431 if (bgc->gc.set == bgpio_set_set &&
432 !(flags & BGPIOF_UNREADABLE_REG_SET))
433 bgc->data = bgc->read_reg(bgc->reg_set);
434 if (bgc->reg_dir && !(flags & BGPIOF_UNREADABLE_REG_DIR))
435 bgc->dir = bgc->read_reg(bgc->reg_dir);
437 return ret;
439 EXPORT_SYMBOL_GPL(bgpio_init);
441 #ifdef CONFIG_GPIO_GENERIC_PLATFORM
443 static void __iomem *bgpio_map(struct platform_device *pdev,
444 const char *name,
445 resource_size_t sane_sz,
446 int *err)
448 struct device *dev = &pdev->dev;
449 struct resource *r;
450 resource_size_t start;
451 resource_size_t sz;
452 void __iomem *ret;
454 *err = 0;
456 r = platform_get_resource_byname(pdev, IORESOURCE_MEM, name);
457 if (!r)
458 return NULL;
460 sz = resource_size(r);
461 if (sz != sane_sz) {
462 *err = -EINVAL;
463 return NULL;
466 start = r->start;
467 if (!devm_request_mem_region(dev, start, sz, r->name)) {
468 *err = -EBUSY;
469 return NULL;
472 ret = devm_ioremap(dev, start, sz);
473 if (!ret) {
474 *err = -ENOMEM;
475 return NULL;
478 return ret;
481 static int bgpio_pdev_probe(struct platform_device *pdev)
483 struct device *dev = &pdev->dev;
484 struct resource *r;
485 void __iomem *dat;
486 void __iomem *set;
487 void __iomem *clr;
488 void __iomem *dirout;
489 void __iomem *dirin;
490 unsigned long sz;
491 unsigned long flags = 0;
492 int err;
493 struct bgpio_chip *bgc;
494 struct bgpio_pdata *pdata = dev_get_platdata(dev);
496 r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dat");
497 if (!r)
498 return -EINVAL;
500 sz = resource_size(r);
502 dat = bgpio_map(pdev, "dat", sz, &err);
503 if (!dat)
504 return err ? err : -EINVAL;
506 set = bgpio_map(pdev, "set", sz, &err);
507 if (err)
508 return err;
510 clr = bgpio_map(pdev, "clr", sz, &err);
511 if (err)
512 return err;
514 dirout = bgpio_map(pdev, "dirout", sz, &err);
515 if (err)
516 return err;
518 dirin = bgpio_map(pdev, "dirin", sz, &err);
519 if (err)
520 return err;
522 if (!strcmp(platform_get_device_id(pdev)->name, "basic-mmio-gpio-be"))
523 flags |= BGPIOF_BIG_ENDIAN;
525 bgc = devm_kzalloc(&pdev->dev, sizeof(*bgc), GFP_KERNEL);
526 if (!bgc)
527 return -ENOMEM;
529 err = bgpio_init(bgc, dev, sz, dat, set, clr, dirout, dirin, flags);
530 if (err)
531 return err;
533 if (pdata) {
534 bgc->gc.base = pdata->base;
535 if (pdata->ngpio > 0)
536 bgc->gc.ngpio = pdata->ngpio;
539 platform_set_drvdata(pdev, bgc);
541 return gpiochip_add(&bgc->gc);
544 static int bgpio_pdev_remove(struct platform_device *pdev)
546 struct bgpio_chip *bgc = platform_get_drvdata(pdev);
548 return bgpio_remove(bgc);
551 static const struct platform_device_id bgpio_id_table[] = {
552 { "basic-mmio-gpio", },
553 { "basic-mmio-gpio-be", },
556 MODULE_DEVICE_TABLE(platform, bgpio_id_table);
558 static struct platform_driver bgpio_driver = {
559 .driver = {
560 .name = "basic-mmio-gpio",
562 .id_table = bgpio_id_table,
563 .probe = bgpio_pdev_probe,
564 .remove = bgpio_pdev_remove,
567 module_platform_driver(bgpio_driver);
569 #endif /* CONFIG_GPIO_GENERIC_PLATFORM */
571 MODULE_DESCRIPTION("Driver for basic memory-mapped GPIO controllers");
572 MODULE_AUTHOR("Anton Vorontsov <cbouatmailru@gmail.com>");
573 MODULE_LICENSE("GPL");