drivers/pci/hotplug/pciehp_pci.c

   1 /*
   2  * PCI Express Hot Plug Controller Driver
   3  *
   4  * Copyright (C) 1995,2001 Compaq Computer Corporation
   5  * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
   6  * Copyright (C) 2001 IBM Corp.
   7  * Copyright (C) 2003-2004 Intel Corporation
   8  *
   9  * All rights reserved.
  10  *
  11  * This program is free software; you can redistribute it and/or modify
  12  * it under the terms of the GNU General Public License as published by
  13  * the Free Software Foundation; either version 2 of the License, or (at
  14  * your option) any later version.
  15  *
  16  * This program is distributed in the hope that it will be useful, but
  17  * WITHOUT ANY WARRANTY; without even the implied warranty of
  18  * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
  19  * NON INFRINGEMENT.  See the GNU General Public License for more
  20  * details.
  21  *
  22  * You should have received a copy of the GNU General Public License
  23  * along with this program; if not, write to the Free Software
  24  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  25  *
  26  * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  27  *
  28  */
  29
  30 #include <linux/module.h>
  31 #include <linux/kernel.h>
  32 #include <linux/types.h>
  33 #include <linux/pci.h>
  34 #include "../pci.h"
  35 #include "pciehp.h"
  36
  37 static void program_hpp_type0(struct pci_dev *dev, struct hpp_type0 *hpp)
  38 {
  39         u16 pci_cmd, pci_bctl;
  40
  41         if (hpp->revision > 1) {
  42                 printk(KERN_WARNING "%s: Rev.%d type0 record not supported\n",
  43                        __FUNCTION__, hpp->revision);
  44                 return;
  45         }
  46
  47         pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, hpp->cache_line_size);
  48         pci_write_config_byte(dev, PCI_LATENCY_TIMER, hpp->latency_timer);
  49         pci_read_config_word(dev, PCI_COMMAND, &pci_cmd);
  50         if (hpp->enable_serr)
  51                 pci_cmd |= PCI_COMMAND_SERR;
  52         else
  53                 pci_cmd &= ~PCI_COMMAND_SERR;
  54         if (hpp->enable_perr)
  55                 pci_cmd |= PCI_COMMAND_PARITY;
  56         else
  57                 pci_cmd &= ~PCI_COMMAND_PARITY;
  58         pci_write_config_word(dev, PCI_COMMAND, pci_cmd);
  59
  60         /* Program bridge control value */
  61         if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
  62                 pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER,
  63                                       hpp->latency_timer);
  64                 pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &pci_bctl);
  65                 if (hpp->enable_serr)
  66                         pci_bctl |= PCI_BRIDGE_CTL_SERR;
  67                 else
  68                         pci_bctl &= ~PCI_BRIDGE_CTL_SERR;
  69                 if (hpp->enable_perr)
  70                         pci_bctl |= PCI_BRIDGE_CTL_PARITY;
  71                 else
  72                         pci_bctl &= ~PCI_BRIDGE_CTL_PARITY;
  73                 pci_write_config_word(dev, PCI_BRIDGE_CONTROL, pci_bctl);
  74         }
  75 }
  76
  77 static void program_hpp_type2(struct pci_dev *dev, struct hpp_type2 *hpp)
  78 {
  79         int pos;
  80         u16 reg16;
  81         u32 reg32;
  82
  83         if (hpp->revision > 1) {
  84                 printk(KERN_WARNING "%s: Rev.%d type2 record not supported\n",
  85                        __FUNCTION__, hpp->revision);
  86                 return;
  87         }
  88
  89         /* Find PCI Express capability */
  90         pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
  91         if (!pos)
  92                 return;
  93
  94         /* Initialize Device Control Register */
  95         pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &reg16);
  96         reg16 = (reg16 & hpp->pci_exp_devctl_and) | hpp->pci_exp_devctl_or;
  97         pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, reg16);
  98
  99         /* Initialize Link Control Register */
 100         if (dev->subordinate) {
 101                 pci_read_config_word(dev, pos + PCI_EXP_LNKCTL, &reg16);
 102                 reg16 = (reg16 & hpp->pci_exp_lnkctl_and)
 103                         | hpp->pci_exp_lnkctl_or;
 104                 pci_write_config_word(dev, pos + PCI_EXP_LNKCTL, reg16);
 105         }
 106
 107         /* Find Advanced Error Reporting Enhanced Capability */
 108         pos = 256;
 109         do {
 110                 pci_read_config_dword(dev, pos, &reg32);
 111                 if (PCI_EXT_CAP_ID(reg32) == PCI_EXT_CAP_ID_ERR)
 112                         break;
 113         } while ((pos = PCI_EXT_CAP_NEXT(reg32)));
 114         if (!pos)
 115                 return;
 116
 117         /* Initialize Uncorrectable Error Mask Register */
 118         pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, &reg32);
 119         reg32 = (reg32 & hpp->unc_err_mask_and) | hpp->unc_err_mask_or;
 120         pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, reg32);
 121
 122         /* Initialize Uncorrectable Error Severity Register */
 123         pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, &reg32);
 124         reg32 = (reg32 & hpp->unc_err_sever_and) | hpp->unc_err_sever_or;
 125         pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, reg32);
 126
 127         /* Initialize Correctable Error Mask Register */
 128         pci_read_config_dword(dev, pos + PCI_ERR_COR_MASK, &reg32);
 129         reg32 = (reg32 & hpp->cor_err_mask_and) | hpp->cor_err_mask_or;
 130         pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, reg32);
 131
 132         /* Initialize Advanced Error Capabilities and Control Register */
 133         pci_read_config_dword(dev, pos + PCI_ERR_CAP, &reg32);
 134         reg32 = (reg32 & hpp->adv_err_cap_and) | hpp->adv_err_cap_or;
 135         pci_write_config_dword(dev, pos + PCI_ERR_CAP, reg32);
 136
 137         /*
 138          * FIXME: The following two registers are not supported yet.
 139          *
 140          *   o Secondary Uncorrectable Error Severity Register
 141          *   o Secondary Uncorrectable Error Mask Register
 142          */
 143 }
 144
 145 static void program_fw_provided_values(struct pci_dev *dev)
 146 {
 147         struct pci_dev *cdev;
 148         struct hotplug_params hpp;
 149
 150         /* Program hpp values for this device */
 151         if (!(dev->hdr_type == PCI_HEADER_TYPE_NORMAL ||
 152                         (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE &&
 153                         (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI)))
 154                 return;
 155
 156         if (pciehp_get_hp_params_from_firmware(dev, &hpp)) {
 157                 printk(KERN_WARNING "%s: Could not get hotplug parameters\n",
 158                        __FUNCTION__);
 159                 return;
 160         }
 161
 162         if (hpp.t2)
 163                 program_hpp_type2(dev, hpp.t2);
 164         if (hpp.t0)
 165                 program_hpp_type0(dev, hpp.t0);
 166
 167         /* Program child devices */
 168         if (dev->subordinate) {
 169                 list_for_each_entry(cdev, &dev->subordinate->devices,
 170                                     bus_list)
 171                         program_fw_provided_values(cdev);
 172         }
 173 }
 174
 175 static int pciehp_add_bridge(struct pci_dev *dev)
 176 {
 177         struct pci_bus *parent = dev->bus;
 178         int pass, busnr, start = parent->secondary;
 179         int end = parent->subordinate;
 180
 181         for (busnr = start; busnr <= end; busnr++) {
 182                 if (!pci_find_bus(pci_domain_nr(parent), busnr))
 183                         break;
 184         }
 185         if (busnr-- > end) {
 186                 err("No bus number available for hot-added bridge %s\n",
 187                                 pci_name(dev));
 188                 return -1;
 189         }
 190         for (pass = 0; pass < 2; pass++)
 191                 busnr = pci_scan_bridge(parent, dev, busnr, pass);
 192         if (!dev->subordinate)
 193                 return -1;
 194         pci_bus_size_bridges(dev->subordinate);
 195         pci_bus_assign_resources(parent);
 196         pci_enable_bridges(parent);
 197         pci_bus_add_devices(parent);
 198         return 0;
 199 }
 200
 201 int pciehp_configure_device(struct slot *p_slot)
 202 {
 203         struct pci_dev *dev;
 204         struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate;
 205         int num, fn;
 206
 207         dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, 0));
 208         if (dev) {
 209                 err("Device %s already exists at %x:%x, cannot hot-add\n",
 210                                 pci_name(dev), p_slot->bus, p_slot->device);
 211                 pci_dev_put(dev);
 212                 return -EINVAL;
 213         }
 214
 215         num = pci_scan_slot(parent, PCI_DEVFN(p_slot->device, 0));
 216         if (num == 0) {
 217                 err("No new device found\n");
 218                 return -ENODEV;
 219         }
 220
 221         for (fn = 0; fn < 8; fn++) {
 222                 dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, fn));
 223                 if (!dev)
 224                         continue;
 225                 if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
 226                         err("Cannot hot-add display device %s\n",
 227                                         pci_name(dev));
 228                         pci_dev_put(dev);
 229                         continue;
 230                 }
 231                 if ((dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) ||
 232                                 (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)) {
 233                         pciehp_add_bridge(dev);
 234                 }
 235                 program_fw_provided_values(dev);
 236                 pci_dev_put(dev);
 237         }
 238
 239         pci_bus_assign_resources(parent);
 240         pci_bus_add_devices(parent);
 241         return 0;
 242 }
 243
 244 int pciehp_unconfigure_device(struct slot *p_slot)
 245 {
 246         int rc = 0;
 247         int j;
 248         u8 bctl = 0;
 249         struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate;
 250
 251         dbg("%s: bus/dev = %x/%x\n", __FUNCTION__, p_slot->bus,
 252                                 p_slot->device);
 253
 254         for (j=0; j<8 ; j++) {
 255                 struct pci_dev* temp = pci_get_slot(parent,
 256                                 (p_slot->device << 3) | j);
 257                 if (!temp)
 258                         continue;
 259                 if ((temp->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
 260                         err("Cannot remove display device %s\n",
 261                                         pci_name(temp));
 262                         pci_dev_put(temp);
 263                         continue;
 264                 }
 265                 if (temp->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
 266                         pci_read_config_byte(temp, PCI_BRIDGE_CONTROL, &bctl);
 267                         if (bctl & PCI_BRIDGE_CTL_VGA) {
 268                                 err("Cannot remove display device %s\n",
 269                                                 pci_name(temp));
 270                                 pci_dev_put(temp);
 271                                 continue;
 272                         }
 273                 }
 274                 pci_remove_bus_device(temp);
 275                 pci_dev_put(temp);
 276         }
 277         /*
 278          * Some PCI Express root ports require fixup after hot-plug operation.
 279          */
 280         if (pcie_mch_quirk)
 281                 pci_fixup_device(pci_fixup_final, p_slot->ctrl->pci_dev);
 282
 283         return rc;
 284 }
 285