2 * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
3 * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
5 * This software is available to you under a choice of one of two
6 * licenses. You may choose to be licensed under the terms of the GNU
7 * General Public License (GPL) Version 2, available from the file
8 * COPYING in the main directory of this source tree, or the
9 * OpenIB.org BSD license below:
11 * Redistribution and use in source and binary forms, with or
12 * without modification, are permitted provided that the following
15 * - Redistributions of source code must retain the above
16 * copyright notice, this list of conditions and the following
19 * - Redistributions in binary form must reproduce the above
20 * copyright notice, this list of conditions and the following
21 * disclaimer in the documentation and/or other materials
22 * provided with the distribution.
24 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
25 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
26 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
27 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
28 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
29 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
30 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
34 #include <linux/pci.h>
35 #include <linux/poll.h>
36 #include <linux/cdev.h>
37 #include <linux/swap.h>
38 #include <linux/export.h>
39 #include <linux/vmalloc.h>
40 #include <linux/slab.h>
41 #include <linux/highmem.h>
43 #include <linux/jiffies.h>
44 #include <linux/cpu.h>
45 #include <asm/pgtable.h>
47 #include "ipath_kernel.h"
48 #include "ipath_common.h"
49 #include "ipath_user_sdma.h"
51 static int ipath_open(struct inode
*, struct file
*);
52 static int ipath_close(struct inode
*, struct file
*);
53 static ssize_t
ipath_write(struct file
*, const char __user
*, size_t,
55 static ssize_t
ipath_writev(struct kiocb
*, const struct iovec
*,
56 unsigned long , loff_t
);
57 static unsigned int ipath_poll(struct file
*, struct poll_table_struct
*);
58 static int ipath_mmap(struct file
*, struct vm_area_struct
*);
60 static const struct file_operations ipath_file_ops
= {
63 .aio_write
= ipath_writev
,
65 .release
= ipath_close
,
68 .llseek
= noop_llseek
,
72 * Convert kernel virtual addresses to physical addresses so they don't
73 * potentially conflict with the chip addresses used as mmap offsets.
74 * It doesn't really matter what mmap offset we use as long as we can
75 * interpret it correctly.
77 static u64
cvt_kvaddr(void *p
)
82 page
= vmalloc_to_page(p
);
84 paddr
= page_to_pfn(page
) << PAGE_SHIFT
;
89 static int ipath_get_base_info(struct file
*fp
,
90 void __user
*ubase
, size_t ubase_size
)
92 struct ipath_portdata
*pd
= port_fp(fp
);
94 struct ipath_base_info
*kinfo
= NULL
;
95 struct ipath_devdata
*dd
= pd
->port_dd
;
100 subport_cnt
= pd
->port_subport_cnt
;
107 master
= !subport_fp(fp
);
111 /* If port sharing is not requested, allow the old size structure */
113 sz
-= 7 * sizeof(u64
);
114 if (ubase_size
< sz
) {
116 "Base size %zu, need %zu (version mismatch?)\n",
122 kinfo
= kzalloc(sizeof(*kinfo
), GFP_KERNEL
);
128 ret
= dd
->ipath_f_get_base_info(pd
, kinfo
);
132 kinfo
->spi_rcvhdr_cnt
= dd
->ipath_rcvhdrcnt
;
133 kinfo
->spi_rcvhdrent_size
= dd
->ipath_rcvhdrentsize
;
134 kinfo
->spi_tidegrcnt
= dd
->ipath_rcvegrcnt
;
135 kinfo
->spi_rcv_egrbufsize
= dd
->ipath_rcvegrbufsize
;
137 * have to mmap whole thing
139 kinfo
->spi_rcv_egrbuftotlen
=
140 pd
->port_rcvegrbuf_chunks
* pd
->port_rcvegrbuf_size
;
141 kinfo
->spi_rcv_egrperchunk
= pd
->port_rcvegrbufs_perchunk
;
142 kinfo
->spi_rcv_egrchunksize
= kinfo
->spi_rcv_egrbuftotlen
/
143 pd
->port_rcvegrbuf_chunks
;
144 kinfo
->spi_tidcnt
= dd
->ipath_rcvtidcnt
/ subport_cnt
;
146 kinfo
->spi_tidcnt
+= dd
->ipath_rcvtidcnt
% subport_cnt
;
148 * for this use, may be ipath_cfgports summed over all chips that
149 * are are configured and present
151 kinfo
->spi_nports
= dd
->ipath_cfgports
;
152 /* unit (chip/board) our port is on */
153 kinfo
->spi_unit
= dd
->ipath_unit
;
154 /* for now, only a single page */
155 kinfo
->spi_tid_maxsize
= PAGE_SIZE
;
158 * Doing this per port, and based on the skip value, etc. This has
159 * to be the actual buffer size, since the protocol code treats it
162 * These have to be set to user addresses in the user code via mmap.
163 * These values are used on return to user code for the mmap target
164 * addresses only. For 32 bit, same 44 bit address problem, so use
165 * the physical address, not virtual. Before 2.6.11, using the
166 * page_address() macro worked, but in 2.6.11, even that returns the
167 * full 64 bit address (upper bits all 1's). So far, using the
168 * physical addresses (or chip offsets, for chip mapping) works, but
169 * no doubt some future kernel release will change that, and we'll be
170 * on to yet another method of dealing with this.
172 kinfo
->spi_rcvhdr_base
= (u64
) pd
->port_rcvhdrq_phys
;
173 kinfo
->spi_rcvhdr_tailaddr
= (u64
) pd
->port_rcvhdrqtailaddr_phys
;
174 kinfo
->spi_rcv_egrbufs
= (u64
) pd
->port_rcvegr_phys
;
175 kinfo
->spi_pioavailaddr
= (u64
) dd
->ipath_pioavailregs_phys
;
176 kinfo
->spi_status
= (u64
) kinfo
->spi_pioavailaddr
+
177 (void *) dd
->ipath_statusp
-
178 (void *) dd
->ipath_pioavailregs_dma
;
180 kinfo
->spi_piocnt
= pd
->port_piocnt
;
181 kinfo
->spi_piobufbase
= (u64
) pd
->port_piobufs
;
182 kinfo
->__spi_uregbase
= (u64
) dd
->ipath_uregbase
+
183 dd
->ipath_ureg_align
* pd
->port_port
;
185 kinfo
->spi_piocnt
= (pd
->port_piocnt
/ subport_cnt
) +
186 (pd
->port_piocnt
% subport_cnt
);
187 /* Master's PIO buffers are after all the slave's */
188 kinfo
->spi_piobufbase
= (u64
) pd
->port_piobufs
+
190 (pd
->port_piocnt
- kinfo
->spi_piocnt
);
192 unsigned slave
= subport_fp(fp
) - 1;
194 kinfo
->spi_piocnt
= pd
->port_piocnt
/ subport_cnt
;
195 kinfo
->spi_piobufbase
= (u64
) pd
->port_piobufs
+
196 dd
->ipath_palign
* kinfo
->spi_piocnt
* slave
;
200 kinfo
->spi_port_uregbase
= (u64
) dd
->ipath_uregbase
+
201 dd
->ipath_ureg_align
* pd
->port_port
;
202 kinfo
->spi_port_rcvegrbuf
= kinfo
->spi_rcv_egrbufs
;
203 kinfo
->spi_port_rcvhdr_base
= kinfo
->spi_rcvhdr_base
;
204 kinfo
->spi_port_rcvhdr_tailaddr
= kinfo
->spi_rcvhdr_tailaddr
;
206 kinfo
->__spi_uregbase
= cvt_kvaddr(pd
->subport_uregbase
+
207 PAGE_SIZE
* subport_fp(fp
));
209 kinfo
->spi_rcvhdr_base
= cvt_kvaddr(pd
->subport_rcvhdr_base
+
210 pd
->port_rcvhdrq_size
* subport_fp(fp
));
211 kinfo
->spi_rcvhdr_tailaddr
= 0;
212 kinfo
->spi_rcv_egrbufs
= cvt_kvaddr(pd
->subport_rcvegrbuf
+
213 pd
->port_rcvegrbuf_chunks
* pd
->port_rcvegrbuf_size
*
216 kinfo
->spi_subport_uregbase
=
217 cvt_kvaddr(pd
->subport_uregbase
);
218 kinfo
->spi_subport_rcvegrbuf
=
219 cvt_kvaddr(pd
->subport_rcvegrbuf
);
220 kinfo
->spi_subport_rcvhdr_base
=
221 cvt_kvaddr(pd
->subport_rcvhdr_base
);
222 ipath_cdbg(PROC
, "port %u flags %x %llx %llx %llx\n",
223 kinfo
->spi_port
, kinfo
->spi_runtime_flags
,
224 (unsigned long long) kinfo
->spi_subport_uregbase
,
225 (unsigned long long) kinfo
->spi_subport_rcvegrbuf
,
226 (unsigned long long) kinfo
->spi_subport_rcvhdr_base
);
230 * All user buffers are 2KB buffers. If we ever support
231 * giving 4KB buffers to user processes, this will need some
234 kinfo
->spi_pioindex
= (kinfo
->spi_piobufbase
-
235 (dd
->ipath_piobufbase
& 0xffffffff)) / dd
->ipath_palign
;
236 kinfo
->spi_pioalign
= dd
->ipath_palign
;
238 kinfo
->spi_qpair
= IPATH_KD_QP
;
240 * user mode PIO buffers are always 2KB, even when 4KB can
241 * be received, and sent via the kernel; this is ibmaxlen
244 kinfo
->spi_piosize
= dd
->ipath_piosize2k
- 2 * sizeof(u32
);
245 kinfo
->spi_mtu
= dd
->ipath_ibmaxlen
; /* maxlen, not ibmtu */
246 kinfo
->spi_port
= pd
->port_port
;
247 kinfo
->spi_subport
= subport_fp(fp
);
248 kinfo
->spi_sw_version
= IPATH_KERN_SWVERSION
;
249 kinfo
->spi_hw_version
= dd
->ipath_revision
;
252 kinfo
->spi_runtime_flags
|= IPATH_RUNTIME_MASTER
;
255 sz
= (ubase_size
< sizeof(*kinfo
)) ? ubase_size
: sizeof(*kinfo
);
256 if (copy_to_user(ubase
, kinfo
, sz
))
265 * ipath_tid_update - update a port TID
267 * @fp: the ipath device file
268 * @ti: the TID information
270 * The new implementation as of Oct 2004 is that the driver assigns
271 * the tid and returns it to the caller. To make it easier to
272 * catch bugs, and to reduce search time, we keep a cursor for
273 * each port, walking the shadow tid array to find one that's not
276 * For now, if we can't allocate the full list, we fail, although
277 * in the long run, we'll allocate as many as we can, and the
278 * caller will deal with that by trying the remaining pages later.
279 * That means that when we fail, we have to mark the tids as not in
280 * use again, in our shadow copy.
282 * It's up to the caller to free the tids when they are done.
283 * We'll unlock the pages as they free them.
285 * Also, right now we are locking one page at a time, but since
286 * the intended use of this routine is for a single group of
287 * virtually contiguous pages, that should change to improve
290 static int ipath_tid_update(struct ipath_portdata
*pd
, struct file
*fp
,
291 const struct ipath_tid_info
*ti
)
294 u32 tid
, porttid
, cnt
, i
, tidcnt
, tidoff
;
296 struct ipath_devdata
*dd
= pd
->port_dd
;
299 u64 __iomem
*tidbase
;
300 unsigned long tidmap
[8];
301 struct page
**pagep
= NULL
;
302 unsigned subport
= subport_fp(fp
);
304 if (!dd
->ipath_pageshadow
) {
311 ipath_dbg("After copyin, tidcnt 0, tidlist %llx\n",
312 (unsigned long long) ti
->tidlist
);
314 * Should we treat as success? likely a bug
319 porttid
= pd
->port_port
* dd
->ipath_rcvtidcnt
;
320 if (!pd
->port_subport_cnt
) {
321 tidcnt
= dd
->ipath_rcvtidcnt
;
322 tid
= pd
->port_tidcursor
;
324 } else if (!subport
) {
325 tidcnt
= (dd
->ipath_rcvtidcnt
/ pd
->port_subport_cnt
) +
326 (dd
->ipath_rcvtidcnt
% pd
->port_subport_cnt
);
327 tidoff
= dd
->ipath_rcvtidcnt
- tidcnt
;
329 tid
= tidcursor_fp(fp
);
331 tidcnt
= dd
->ipath_rcvtidcnt
/ pd
->port_subport_cnt
;
332 tidoff
= tidcnt
* (subport
- 1);
334 tid
= tidcursor_fp(fp
);
337 /* make sure it all fits in port_tid_pg_list */
338 dev_info(&dd
->pcidev
->dev
, "Process tried to allocate %u "
339 "TIDs, only trying max (%u)\n", cnt
, tidcnt
);
342 pagep
= &((struct page
**) pd
->port_tid_pg_list
)[tidoff
];
343 tidlist
= &((u16
*) &pagep
[dd
->ipath_rcvtidcnt
])[tidoff
];
345 memset(tidmap
, 0, sizeof(tidmap
));
346 /* before decrement; chip actual # */
348 tidbase
= (u64 __iomem
*) (((char __iomem
*) dd
->ipath_kregbase
) +
349 dd
->ipath_rcvtidbase
+
350 porttid
* sizeof(*tidbase
));
352 ipath_cdbg(VERBOSE
, "Port%u %u tids, cursor %u, tidbase %p\n",
353 pd
->port_port
, cnt
, tid
, tidbase
);
355 /* virtual address of first page in transfer */
356 vaddr
= ti
->tidvaddr
;
357 if (!access_ok(VERIFY_WRITE
, (void __user
*) vaddr
,
359 ipath_dbg("Fail vaddr %p, %u pages, !access_ok\n",
364 ret
= ipath_get_user_pages(vaddr
, cnt
, pagep
);
367 ipath_dbg("Failed to lock addr %p, %u pages "
368 "(already locked)\n",
369 (void *) vaddr
, cnt
);
371 * for now, continue, and see what happens but with
372 * the new implementation, this should never happen,
373 * unless perhaps the user has mpin'ed the pages
374 * themselves (something we need to test)
378 dev_info(&dd
->pcidev
->dev
,
379 "Failed to lock addr %p, %u pages: "
380 "errno %d\n", (void *) vaddr
, cnt
, -ret
);
384 for (i
= 0; i
< cnt
; i
++, vaddr
+= PAGE_SIZE
) {
385 for (; ntids
--; tid
++) {
388 if (!dd
->ipath_pageshadow
[porttid
+ tid
])
393 * oops, wrapped all the way through their TIDs,
394 * and didn't have enough free; see comments at
397 ipath_dbg("Not enough free TIDs for %u pages "
398 "(index %d), failing\n", cnt
, i
);
399 i
--; /* last tidlist[i] not filled in */
403 tidlist
[i
] = tid
+ tidoff
;
404 ipath_cdbg(VERBOSE
, "Updating idx %u to TID %u, "
405 "vaddr %lx\n", i
, tid
+ tidoff
, vaddr
);
406 /* we "know" system pages and TID pages are same size */
407 dd
->ipath_pageshadow
[porttid
+ tid
] = pagep
[i
];
408 dd
->ipath_physshadow
[porttid
+ tid
] = ipath_map_page(
409 dd
->pcidev
, pagep
[i
], 0, PAGE_SIZE
,
412 * don't need atomic or it's overhead
414 __set_bit(tid
, tidmap
);
415 physaddr
= dd
->ipath_physshadow
[porttid
+ tid
];
416 ipath_stats
.sps_pagelocks
++;
418 "TID %u, vaddr %lx, physaddr %llx pgp %p\n",
419 tid
, vaddr
, (unsigned long long) physaddr
,
421 dd
->ipath_f_put_tid(dd
, &tidbase
[tid
], RCVHQ_RCV_TYPE_EXPECTED
,
424 * don't check this tid in ipath_portshadow, since we
425 * just filled it in; start with the next one.
433 /* jump here if copy out of updated info failed... */
434 ipath_dbg("After failure (ret=%d), undo %d of %d entries\n",
436 /* same code that's in ipath_free_tid() */
437 limit
= sizeof(tidmap
) * BITS_PER_BYTE
;
439 /* just in case size changes in future */
441 tid
= find_first_bit((const unsigned long *)tidmap
, limit
);
442 for (; tid
< limit
; tid
++) {
443 if (!test_bit(tid
, tidmap
))
445 if (dd
->ipath_pageshadow
[porttid
+ tid
]) {
446 ipath_cdbg(VERBOSE
, "Freeing TID %u\n",
448 dd
->ipath_f_put_tid(dd
, &tidbase
[tid
],
449 RCVHQ_RCV_TYPE_EXPECTED
,
450 dd
->ipath_tidinvalid
);
451 pci_unmap_page(dd
->pcidev
,
452 dd
->ipath_physshadow
[porttid
+ tid
],
453 PAGE_SIZE
, PCI_DMA_FROMDEVICE
);
454 dd
->ipath_pageshadow
[porttid
+ tid
] = NULL
;
455 ipath_stats
.sps_pageunlocks
++;
458 ipath_release_user_pages(pagep
, cnt
);
461 * Copy the updated array, with ipath_tid's filled in, back
462 * to user. Since we did the copy in already, this "should
463 * never fail" If it does, we have to clean up...
465 if (copy_to_user((void __user
*)
466 (unsigned long) ti
->tidlist
,
467 tidlist
, cnt
* sizeof(*tidlist
))) {
471 if (copy_to_user((void __user
*) (unsigned long) ti
->tidmap
,
472 tidmap
, sizeof tidmap
)) {
478 if (!pd
->port_subport_cnt
)
479 pd
->port_tidcursor
= tid
;
481 tidcursor_fp(fp
) = tid
;
486 ipath_dbg("Failed to map %u TID pages, failing with %d\n",
492 * ipath_tid_free - free a port TID
494 * @subport: the subport
497 * right now we are unlocking one page at a time, but since
498 * the intended use of this routine is for a single group of
499 * virtually contiguous pages, that should change to improve
500 * performance. We check that the TID is in range for this port
501 * but otherwise don't check validity; if user has an error and
502 * frees the wrong tid, it's only their own data that can thereby
503 * be corrupted. We do check that the TID was in use, for sanity
504 * We always use our idea of the saved address, not the address that
505 * they pass in to us.
508 static int ipath_tid_free(struct ipath_portdata
*pd
, unsigned subport
,
509 const struct ipath_tid_info
*ti
)
512 u32 tid
, porttid
, cnt
, limit
, tidcnt
;
513 struct ipath_devdata
*dd
= pd
->port_dd
;
514 u64 __iomem
*tidbase
;
515 unsigned long tidmap
[8];
517 if (!dd
->ipath_pageshadow
) {
522 if (copy_from_user(tidmap
, (void __user
*)(unsigned long)ti
->tidmap
,
528 porttid
= pd
->port_port
* dd
->ipath_rcvtidcnt
;
529 if (!pd
->port_subport_cnt
)
530 tidcnt
= dd
->ipath_rcvtidcnt
;
532 tidcnt
= (dd
->ipath_rcvtidcnt
/ pd
->port_subport_cnt
) +
533 (dd
->ipath_rcvtidcnt
% pd
->port_subport_cnt
);
534 porttid
+= dd
->ipath_rcvtidcnt
- tidcnt
;
536 tidcnt
= dd
->ipath_rcvtidcnt
/ pd
->port_subport_cnt
;
537 porttid
+= tidcnt
* (subport
- 1);
539 tidbase
= (u64 __iomem
*) ((char __iomem
*)(dd
->ipath_kregbase
) +
540 dd
->ipath_rcvtidbase
+
541 porttid
* sizeof(*tidbase
));
543 limit
= sizeof(tidmap
) * BITS_PER_BYTE
;
545 /* just in case size changes in future */
547 tid
= find_first_bit(tidmap
, limit
);
548 ipath_cdbg(VERBOSE
, "Port%u free %u tids; first bit (max=%d) "
549 "set is %d, porttid %u\n", pd
->port_port
, ti
->tidcnt
,
550 limit
, tid
, porttid
);
551 for (cnt
= 0; tid
< limit
; tid
++) {
553 * small optimization; if we detect a run of 3 or so without
554 * any set, use find_first_bit again. That's mainly to
555 * accelerate the case where we wrapped, so we have some at
556 * the beginning, and some at the end, and a big gap
559 if (!test_bit(tid
, tidmap
))
562 if (dd
->ipath_pageshadow
[porttid
+ tid
]) {
564 p
= dd
->ipath_pageshadow
[porttid
+ tid
];
565 dd
->ipath_pageshadow
[porttid
+ tid
] = NULL
;
566 ipath_cdbg(VERBOSE
, "PID %u freeing TID %u\n",
567 pid_nr(pd
->port_pid
), tid
);
568 dd
->ipath_f_put_tid(dd
, &tidbase
[tid
],
569 RCVHQ_RCV_TYPE_EXPECTED
,
570 dd
->ipath_tidinvalid
);
571 pci_unmap_page(dd
->pcidev
,
572 dd
->ipath_physshadow
[porttid
+ tid
],
573 PAGE_SIZE
, PCI_DMA_FROMDEVICE
);
574 ipath_release_user_pages(&p
, 1);
575 ipath_stats
.sps_pageunlocks
++;
577 ipath_dbg("Unused tid %u, ignoring\n", tid
);
579 if (cnt
!= ti
->tidcnt
)
580 ipath_dbg("passed in tidcnt %d, only %d bits set in map\n",
584 ipath_dbg("Failed to unmap %u TID pages, failing with %d\n",
590 * ipath_set_part_key - set a partition key
594 * We can have up to 4 active at a time (other than the default, which is
595 * always allowed). This is somewhat tricky, since multiple ports may set
596 * the same key, so we reference count them, and clean up at exit. All 4
597 * partition keys are packed into a single infinipath register. It's an
598 * error for a process to set the same pkey multiple times. We provide no
599 * mechanism to de-allocate a pkey at this time, we may eventually need to
600 * do that. I've used the atomic operations, and no locking, and only make
601 * a single pass through what's available. This should be more than
602 * adequate for some time. I'll think about spinlocks or the like if and as
605 static int ipath_set_part_key(struct ipath_portdata
*pd
, u16 key
)
607 struct ipath_devdata
*dd
= pd
->port_dd
;
608 int i
, any
= 0, pidx
= -1;
609 u16 lkey
= key
& 0x7FFF;
612 if (lkey
== (IPATH_DEFAULT_P_KEY
& 0x7FFF)) {
613 /* nothing to do; this key always valid */
618 ipath_cdbg(VERBOSE
, "p%u try to set pkey %hx, current keys "
619 "%hx:%x %hx:%x %hx:%x %hx:%x\n",
620 pd
->port_port
, key
, dd
->ipath_pkeys
[0],
621 atomic_read(&dd
->ipath_pkeyrefs
[0]), dd
->ipath_pkeys
[1],
622 atomic_read(&dd
->ipath_pkeyrefs
[1]), dd
->ipath_pkeys
[2],
623 atomic_read(&dd
->ipath_pkeyrefs
[2]), dd
->ipath_pkeys
[3],
624 atomic_read(&dd
->ipath_pkeyrefs
[3]));
627 ipath_cdbg(PROC
, "p%u tries to set key 0, not allowed\n",
634 * Set the full membership bit, because it has to be
635 * set in the register or the packet, and it seems
636 * cleaner to set in the register than to force all
637 * callers to set it. (see bug 4331)
641 for (i
= 0; i
< ARRAY_SIZE(pd
->port_pkeys
); i
++) {
642 if (!pd
->port_pkeys
[i
] && pidx
== -1)
644 if (pd
->port_pkeys
[i
] == key
) {
645 ipath_cdbg(VERBOSE
, "p%u tries to set same pkey "
646 "(%x) more than once\n",
653 ipath_dbg("All pkeys for port %u already in use, "
654 "can't set %x\n", pd
->port_port
, key
);
658 for (any
= i
= 0; i
< ARRAY_SIZE(dd
->ipath_pkeys
); i
++) {
659 if (!dd
->ipath_pkeys
[i
]) {
663 if (dd
->ipath_pkeys
[i
] == key
) {
664 atomic_t
*pkrefs
= &dd
->ipath_pkeyrefs
[i
];
666 if (atomic_inc_return(pkrefs
) > 1) {
667 pd
->port_pkeys
[pidx
] = key
;
668 ipath_cdbg(VERBOSE
, "p%u set key %x "
669 "matches #%d, count now %d\n",
670 pd
->port_port
, key
, i
,
671 atomic_read(pkrefs
));
676 * lost race, decrement count, catch below
679 ipath_cdbg(VERBOSE
, "Lost race, count was "
680 "0, after dec, it's %d\n",
681 atomic_read(pkrefs
));
685 if ((dd
->ipath_pkeys
[i
] & 0x7FFF) == lkey
) {
687 * It makes no sense to have both the limited and
688 * full membership PKEY set at the same time since
689 * the unlimited one will disable the limited one.
696 ipath_dbg("port %u, all pkeys already in use, "
697 "can't set %x\n", pd
->port_port
, key
);
701 for (any
= i
= 0; i
< ARRAY_SIZE(dd
->ipath_pkeys
); i
++) {
702 if (!dd
->ipath_pkeys
[i
] &&
703 atomic_inc_return(&dd
->ipath_pkeyrefs
[i
]) == 1) {
706 /* for ipathstats, etc. */
707 ipath_stats
.sps_pkeys
[i
] = lkey
;
708 pd
->port_pkeys
[pidx
] = dd
->ipath_pkeys
[i
] = key
;
710 (u64
) dd
->ipath_pkeys
[0] |
711 ((u64
) dd
->ipath_pkeys
[1] << 16) |
712 ((u64
) dd
->ipath_pkeys
[2] << 32) |
713 ((u64
) dd
->ipath_pkeys
[3] << 48);
714 ipath_cdbg(PROC
, "p%u set key %x in #%d, "
715 "portidx %d, new pkey reg %llx\n",
716 pd
->port_port
, key
, i
, pidx
,
717 (unsigned long long) pkey
);
719 dd
, dd
->ipath_kregs
->kr_partitionkey
, pkey
);
725 ipath_dbg("port %u, all pkeys already in use 2nd pass, "
726 "can't set %x\n", pd
->port_port
, key
);
734 * ipath_manage_rcvq - manage a port's receive queue
736 * @subport: the subport
737 * @start_stop: action to carry out
739 * start_stop == 0 disables receive on the port, for use in queue
740 * overflow conditions. start_stop==1 re-enables, to be used to
741 * re-init the software copy of the head register
743 static int ipath_manage_rcvq(struct ipath_portdata
*pd
, unsigned subport
,
746 struct ipath_devdata
*dd
= pd
->port_dd
;
748 ipath_cdbg(PROC
, "%sabling rcv for unit %u port %u:%u\n",
749 start_stop
? "en" : "dis", dd
->ipath_unit
,
750 pd
->port_port
, subport
);
753 /* atomically clear receive enable port. */
756 * On enable, force in-memory copy of the tail register to
757 * 0, so that protocol code doesn't have to worry about
758 * whether or not the chip has yet updated the in-memory
759 * copy or not on return from the system call. The chip
760 * always resets it's tail register back to 0 on a
761 * transition from disabled to enabled. This could cause a
762 * problem if software was broken, and did the enable w/o
763 * the disable, but eventually the in-memory copy will be
764 * updated and correct itself, even in the face of software
767 if (pd
->port_rcvhdrtail_kvaddr
)
768 ipath_clear_rcvhdrtail(pd
);
769 set_bit(dd
->ipath_r_portenable_shift
+ pd
->port_port
,
772 clear_bit(dd
->ipath_r_portenable_shift
+ pd
->port_port
,
774 ipath_write_kreg(dd
, dd
->ipath_kregs
->kr_rcvctrl
,
776 /* now be sure chip saw it before we return */
777 ipath_read_kreg64(dd
, dd
->ipath_kregs
->kr_scratch
);
780 * And try to be sure that tail reg update has happened too.
781 * This should in theory interlock with the RXE changes to
782 * the tail register. Don't assign it to the tail register
783 * in memory copy, since we could overwrite an update by the
786 ipath_read_ureg32(dd
, ur_rcvhdrtail
, pd
->port_port
);
788 /* always; new head should be equal to new tail; see above */
793 static void ipath_clean_part_key(struct ipath_portdata
*pd
,
794 struct ipath_devdata
*dd
)
796 int i
, j
, pchanged
= 0;
799 /* for debugging only */
800 oldpkey
= (u64
) dd
->ipath_pkeys
[0] |
801 ((u64
) dd
->ipath_pkeys
[1] << 16) |
802 ((u64
) dd
->ipath_pkeys
[2] << 32) |
803 ((u64
) dd
->ipath_pkeys
[3] << 48);
805 for (i
= 0; i
< ARRAY_SIZE(pd
->port_pkeys
); i
++) {
806 if (!pd
->port_pkeys
[i
])
808 ipath_cdbg(VERBOSE
, "look for key[%d] %hx in pkeys\n", i
,
810 for (j
= 0; j
< ARRAY_SIZE(dd
->ipath_pkeys
); j
++) {
811 /* check for match independent of the global bit */
812 if ((dd
->ipath_pkeys
[j
] & 0x7fff) !=
813 (pd
->port_pkeys
[i
] & 0x7fff))
815 if (atomic_dec_and_test(&dd
->ipath_pkeyrefs
[j
])) {
816 ipath_cdbg(VERBOSE
, "p%u clear key "
819 pd
->port_pkeys
[i
], j
);
820 ipath_stats
.sps_pkeys
[j
] =
821 dd
->ipath_pkeys
[j
] = 0;
825 VERBOSE
, "p%u key %x matches #%d, "
826 "but ref still %d\n", pd
->port_port
,
827 pd
->port_pkeys
[i
], j
,
828 atomic_read(&dd
->ipath_pkeyrefs
[j
]));
831 pd
->port_pkeys
[i
] = 0;
834 u64 pkey
= (u64
) dd
->ipath_pkeys
[0] |
835 ((u64
) dd
->ipath_pkeys
[1] << 16) |
836 ((u64
) dd
->ipath_pkeys
[2] << 32) |
837 ((u64
) dd
->ipath_pkeys
[3] << 48);
838 ipath_cdbg(VERBOSE
, "p%u old pkey reg %llx, "
839 "new pkey reg %llx\n", pd
->port_port
,
840 (unsigned long long) oldpkey
,
841 (unsigned long long) pkey
);
842 ipath_write_kreg(dd
, dd
->ipath_kregs
->kr_partitionkey
,
848 * Initialize the port data with the receive buffer sizes
849 * so this can be done while the master port is locked.
850 * Otherwise, there is a race with a slave opening the port
851 * and seeing these fields uninitialized.
853 static void init_user_egr_sizes(struct ipath_portdata
*pd
)
855 struct ipath_devdata
*dd
= pd
->port_dd
;
856 unsigned egrperchunk
, egrcnt
, size
;
859 * to avoid wasting a lot of memory, we allocate 32KB chunks of
860 * physically contiguous memory, advance through it until used up
861 * and then allocate more. Of course, we need memory to store those
862 * extra pointers, now. Started out with 256KB, but under heavy
863 * memory pressure (creating large files and then copying them over
864 * NFS while doing lots of MPI jobs), we hit some allocation
865 * failures, even though we can sleep... (2.6.10) Still get
866 * failures at 64K. 32K is the lowest we can go without wasting
870 egrperchunk
= size
/ dd
->ipath_rcvegrbufsize
;
871 egrcnt
= dd
->ipath_rcvegrcnt
;
872 pd
->port_rcvegrbuf_chunks
= (egrcnt
+ egrperchunk
- 1) / egrperchunk
;
873 pd
->port_rcvegrbufs_perchunk
= egrperchunk
;
874 pd
->port_rcvegrbuf_size
= size
;
878 * ipath_create_user_egr - allocate eager TID buffers
879 * @pd: the port to allocate TID buffers for
881 * This routine is now quite different for user and kernel, because
882 * the kernel uses skb's, for the accelerated network performance
883 * This is the user port version
885 * Allocate the eager TID buffers and program them into infinipath
886 * They are no longer completely contiguous, we do multiple allocation
889 static int ipath_create_user_egr(struct ipath_portdata
*pd
)
891 struct ipath_devdata
*dd
= pd
->port_dd
;
892 unsigned e
, egrcnt
, egrperchunk
, chunk
, egrsize
, egroff
;
898 * GFP_USER, but without GFP_FS, so buffer cache can be
899 * coalesced (we hope); otherwise, even at order 4,
900 * heavy filesystem activity makes these fail, and we can
901 * use compound pages.
903 gfp_flags
= __GFP_WAIT
| __GFP_IO
| __GFP_COMP
;
905 egrcnt
= dd
->ipath_rcvegrcnt
;
906 /* TID number offset for this port */
907 egroff
= (pd
->port_port
- 1) * egrcnt
+ dd
->ipath_p0_rcvegrcnt
;
908 egrsize
= dd
->ipath_rcvegrbufsize
;
909 ipath_cdbg(VERBOSE
, "Allocating %d egr buffers, at egrtid "
910 "offset %x, egrsize %u\n", egrcnt
, egroff
, egrsize
);
912 chunk
= pd
->port_rcvegrbuf_chunks
;
913 egrperchunk
= pd
->port_rcvegrbufs_perchunk
;
914 size
= pd
->port_rcvegrbuf_size
;
915 pd
->port_rcvegrbuf
= kmalloc(chunk
* sizeof(pd
->port_rcvegrbuf
[0]),
917 if (!pd
->port_rcvegrbuf
) {
921 pd
->port_rcvegrbuf_phys
=
922 kmalloc(chunk
* sizeof(pd
->port_rcvegrbuf_phys
[0]),
924 if (!pd
->port_rcvegrbuf_phys
) {
928 for (e
= 0; e
< pd
->port_rcvegrbuf_chunks
; e
++) {
930 pd
->port_rcvegrbuf
[e
] = dma_alloc_coherent(
931 &dd
->pcidev
->dev
, size
, &pd
->port_rcvegrbuf_phys
[e
],
934 if (!pd
->port_rcvegrbuf
[e
]) {
936 goto bail_rcvegrbuf_phys
;
940 pd
->port_rcvegr_phys
= pd
->port_rcvegrbuf_phys
[0];
942 for (e
= chunk
= 0; chunk
< pd
->port_rcvegrbuf_chunks
; chunk
++) {
943 dma_addr_t pa
= pd
->port_rcvegrbuf_phys
[chunk
];
946 for (i
= 0; e
< egrcnt
&& i
< egrperchunk
; e
++, i
++) {
947 dd
->ipath_f_put_tid(dd
, e
+ egroff
+
951 dd
->ipath_rcvegrbase
),
952 RCVHQ_RCV_TYPE_EAGER
, pa
);
955 cond_resched(); /* don't hog the cpu */
962 for (e
= 0; e
< pd
->port_rcvegrbuf_chunks
&&
963 pd
->port_rcvegrbuf
[e
]; e
++) {
964 dma_free_coherent(&dd
->pcidev
->dev
, size
,
965 pd
->port_rcvegrbuf
[e
],
966 pd
->port_rcvegrbuf_phys
[e
]);
969 kfree(pd
->port_rcvegrbuf_phys
);
970 pd
->port_rcvegrbuf_phys
= NULL
;
972 kfree(pd
->port_rcvegrbuf
);
973 pd
->port_rcvegrbuf
= NULL
;
979 /* common code for the mappings on dma_alloc_coherent mem */
980 static int ipath_mmap_mem(struct vm_area_struct
*vma
,
981 struct ipath_portdata
*pd
, unsigned len
, int write_ok
,
982 void *kvaddr
, char *what
)
984 struct ipath_devdata
*dd
= pd
->port_dd
;
988 if ((vma
->vm_end
- vma
->vm_start
) > len
) {
989 dev_info(&dd
->pcidev
->dev
,
990 "FAIL on %s: len %lx > %x\n", what
,
991 vma
->vm_end
- vma
->vm_start
, len
);
997 if (vma
->vm_flags
& VM_WRITE
) {
998 dev_info(&dd
->pcidev
->dev
,
999 "%s must be mapped readonly\n", what
);
1004 /* don't allow them to later change with mprotect */
1005 vma
->vm_flags
&= ~VM_MAYWRITE
;
1008 pfn
= virt_to_phys(kvaddr
) >> PAGE_SHIFT
;
1009 ret
= remap_pfn_range(vma
, vma
->vm_start
, pfn
,
1010 len
, vma
->vm_page_prot
);
1012 dev_info(&dd
->pcidev
->dev
, "%s port%u mmap of %lx, %x "
1013 "bytes r%c failed: %d\n", what
, pd
->port_port
,
1014 pfn
, len
, write_ok
?'w':'o', ret
);
1016 ipath_cdbg(VERBOSE
, "%s port%u mmaped %lx, %x bytes "
1017 "r%c\n", what
, pd
->port_port
, pfn
, len
,
1023 static int mmap_ureg(struct vm_area_struct
*vma
, struct ipath_devdata
*dd
,
1030 * This is real hardware, so use io_remap. This is the mechanism
1031 * for the user process to update the head registers for their port
1034 if ((vma
->vm_end
- vma
->vm_start
) > PAGE_SIZE
) {
1035 dev_info(&dd
->pcidev
->dev
, "FAIL mmap userreg: reqlen "
1036 "%lx > PAGE\n", vma
->vm_end
- vma
->vm_start
);
1039 phys
= dd
->ipath_physaddr
+ ureg
;
1040 vma
->vm_page_prot
= pgprot_noncached(vma
->vm_page_prot
);
1042 vma
->vm_flags
|= VM_DONTCOPY
| VM_DONTEXPAND
;
1043 ret
= io_remap_pfn_range(vma
, vma
->vm_start
,
1045 vma
->vm_end
- vma
->vm_start
,
1051 static int mmap_piobufs(struct vm_area_struct
*vma
,
1052 struct ipath_devdata
*dd
,
1053 struct ipath_portdata
*pd
,
1054 unsigned piobufs
, unsigned piocnt
)
1060 * When we map the PIO buffers in the chip, we want to map them as
1061 * writeonly, no read possible. This prevents access to previous
1062 * process data, and catches users who might try to read the i/o
1063 * space due to a bug.
1065 if ((vma
->vm_end
- vma
->vm_start
) > (piocnt
* dd
->ipath_palign
)) {
1066 dev_info(&dd
->pcidev
->dev
, "FAIL mmap piobufs: "
1067 "reqlen %lx > PAGE\n",
1068 vma
->vm_end
- vma
->vm_start
);
1073 phys
= dd
->ipath_physaddr
+ piobufs
;
1075 #if defined(__powerpc__)
1076 /* There isn't a generic way to specify writethrough mappings */
1077 pgprot_val(vma
->vm_page_prot
) |= _PAGE_NO_CACHE
;
1078 pgprot_val(vma
->vm_page_prot
) |= _PAGE_WRITETHRU
;
1079 pgprot_val(vma
->vm_page_prot
) &= ~_PAGE_GUARDED
;
1083 * don't allow them to later change to readable with mprotect (for when
1084 * not initially mapped readable, as is normally the case)
1086 vma
->vm_flags
&= ~VM_MAYREAD
;
1087 vma
->vm_flags
|= VM_DONTCOPY
| VM_DONTEXPAND
;
1089 ret
= io_remap_pfn_range(vma
, vma
->vm_start
, phys
>> PAGE_SHIFT
,
1090 vma
->vm_end
- vma
->vm_start
,
1096 static int mmap_rcvegrbufs(struct vm_area_struct
*vma
,
1097 struct ipath_portdata
*pd
)
1099 struct ipath_devdata
*dd
= pd
->port_dd
;
1100 unsigned long start
, size
;
1101 size_t total_size
, i
;
1105 size
= pd
->port_rcvegrbuf_size
;
1106 total_size
= pd
->port_rcvegrbuf_chunks
* size
;
1107 if ((vma
->vm_end
- vma
->vm_start
) > total_size
) {
1108 dev_info(&dd
->pcidev
->dev
, "FAIL on egr bufs: "
1109 "reqlen %lx > actual %lx\n",
1110 vma
->vm_end
- vma
->vm_start
,
1111 (unsigned long) total_size
);
1116 if (vma
->vm_flags
& VM_WRITE
) {
1117 dev_info(&dd
->pcidev
->dev
, "Can't map eager buffers as "
1118 "writable (flags=%lx)\n", vma
->vm_flags
);
1122 /* don't allow them to later change to writeable with mprotect */
1123 vma
->vm_flags
&= ~VM_MAYWRITE
;
1125 start
= vma
->vm_start
;
1127 for (i
= 0; i
< pd
->port_rcvegrbuf_chunks
; i
++, start
+= size
) {
1128 pfn
= virt_to_phys(pd
->port_rcvegrbuf
[i
]) >> PAGE_SHIFT
;
1129 ret
= remap_pfn_range(vma
, start
, pfn
, size
,
1141 * ipath_file_vma_fault - handle a VMA page fault.
1143 static int ipath_file_vma_fault(struct vm_area_struct
*vma
,
1144 struct vm_fault
*vmf
)
1148 page
= vmalloc_to_page((void *)(vmf
->pgoff
<< PAGE_SHIFT
));
1150 return VM_FAULT_SIGBUS
;
1157 static const struct vm_operations_struct ipath_file_vm_ops
= {
1158 .fault
= ipath_file_vma_fault
,
1161 static int mmap_kvaddr(struct vm_area_struct
*vma
, u64 pgaddr
,
1162 struct ipath_portdata
*pd
, unsigned subport
)
1165 struct ipath_devdata
*dd
;
1170 /* If the port is not shared, all addresses should be physical */
1171 if (!pd
->port_subport_cnt
)
1175 size
= pd
->port_rcvegrbuf_chunks
* pd
->port_rcvegrbuf_size
;
1178 * Each process has all the subport uregbase, rcvhdrq, and
1179 * rcvegrbufs mmapped - as an array for all the processes,
1180 * and also separately for this process.
1182 if (pgaddr
== cvt_kvaddr(pd
->subport_uregbase
)) {
1183 addr
= pd
->subport_uregbase
;
1184 size
= PAGE_SIZE
* pd
->port_subport_cnt
;
1185 } else if (pgaddr
== cvt_kvaddr(pd
->subport_rcvhdr_base
)) {
1186 addr
= pd
->subport_rcvhdr_base
;
1187 size
= pd
->port_rcvhdrq_size
* pd
->port_subport_cnt
;
1188 } else if (pgaddr
== cvt_kvaddr(pd
->subport_rcvegrbuf
)) {
1189 addr
= pd
->subport_rcvegrbuf
;
1190 size
*= pd
->port_subport_cnt
;
1191 } else if (pgaddr
== cvt_kvaddr(pd
->subport_uregbase
+
1192 PAGE_SIZE
* subport
)) {
1193 addr
= pd
->subport_uregbase
+ PAGE_SIZE
* subport
;
1195 } else if (pgaddr
== cvt_kvaddr(pd
->subport_rcvhdr_base
+
1196 pd
->port_rcvhdrq_size
* subport
)) {
1197 addr
= pd
->subport_rcvhdr_base
+
1198 pd
->port_rcvhdrq_size
* subport
;
1199 size
= pd
->port_rcvhdrq_size
;
1200 } else if (pgaddr
== cvt_kvaddr(pd
->subport_rcvegrbuf
+
1202 addr
= pd
->subport_rcvegrbuf
+ size
* subport
;
1203 /* rcvegrbufs are read-only on the slave */
1204 if (vma
->vm_flags
& VM_WRITE
) {
1205 dev_info(&dd
->pcidev
->dev
,
1206 "Can't map eager buffers as "
1207 "writable (flags=%lx)\n", vma
->vm_flags
);
1212 * Don't allow permission to later change to writeable
1215 vma
->vm_flags
&= ~VM_MAYWRITE
;
1219 len
= vma
->vm_end
- vma
->vm_start
;
1221 ipath_cdbg(MM
, "FAIL: reqlen %lx > %zx\n", len
, size
);
1226 vma
->vm_pgoff
= (unsigned long) addr
>> PAGE_SHIFT
;
1227 vma
->vm_ops
= &ipath_file_vm_ops
;
1228 vma
->vm_flags
|= VM_RESERVED
| VM_DONTEXPAND
;
1236 * ipath_mmap - mmap various structures into user space
1237 * @fp: the file pointer
1240 * We use this to have a shared buffer between the kernel and the user code
1241 * for the rcvhdr queue, egr buffers, and the per-port user regs and pio
1242 * buffers in the chip. We have the open and close entries so we can bump
1243 * the ref count and keep the driver from being unloaded while still mapped.
1245 static int ipath_mmap(struct file
*fp
, struct vm_area_struct
*vma
)
1247 struct ipath_portdata
*pd
;
1248 struct ipath_devdata
*dd
;
1250 unsigned piobufs
, piocnt
;
1261 * This is the ipath_do_user_init() code, mapping the shared buffers
1262 * into the user process. The address referred to by vm_pgoff is the
1263 * file offset passed via mmap(). For shared ports, this is the
1264 * kernel vmalloc() address of the pages to share with the master.
1265 * For non-shared or master ports, this is a physical address.
1266 * We only do one mmap for each space mapped.
1268 pgaddr
= vma
->vm_pgoff
<< PAGE_SHIFT
;
1271 * Check for 0 in case one of the allocations failed, but user
1272 * called mmap anyway.
1279 ipath_cdbg(MM
, "pgaddr %llx vm_start=%lx len %lx port %u:%u:%u\n",
1280 (unsigned long long) pgaddr
, vma
->vm_start
,
1281 vma
->vm_end
- vma
->vm_start
, dd
->ipath_unit
,
1282 pd
->port_port
, subport_fp(fp
));
1285 * Physical addresses must fit in 40 bits for our hardware.
1286 * Check for kernel virtual addresses first, anything else must
1287 * match a HW or memory address.
1289 ret
= mmap_kvaddr(vma
, pgaddr
, pd
, subport_fp(fp
));
1296 ureg
= dd
->ipath_uregbase
+ dd
->ipath_ureg_align
* pd
->port_port
;
1297 if (!pd
->port_subport_cnt
) {
1298 /* port is not shared */
1299 piocnt
= pd
->port_piocnt
;
1300 piobufs
= pd
->port_piobufs
;
1301 } else if (!subport_fp(fp
)) {
1302 /* caller is the master */
1303 piocnt
= (pd
->port_piocnt
/ pd
->port_subport_cnt
) +
1304 (pd
->port_piocnt
% pd
->port_subport_cnt
);
1305 piobufs
= pd
->port_piobufs
+
1306 dd
->ipath_palign
* (pd
->port_piocnt
- piocnt
);
1308 unsigned slave
= subport_fp(fp
) - 1;
1310 /* caller is a slave */
1311 piocnt
= pd
->port_piocnt
/ pd
->port_subport_cnt
;
1312 piobufs
= pd
->port_piobufs
+ dd
->ipath_palign
* piocnt
* slave
;
1316 ret
= mmap_ureg(vma
, dd
, ureg
);
1317 else if (pgaddr
== piobufs
)
1318 ret
= mmap_piobufs(vma
, dd
, pd
, piobufs
, piocnt
);
1319 else if (pgaddr
== dd
->ipath_pioavailregs_phys
)
1320 /* in-memory copy of pioavail registers */
1321 ret
= ipath_mmap_mem(vma
, pd
, PAGE_SIZE
, 0,
1322 (void *) dd
->ipath_pioavailregs_dma
,
1323 "pioavail registers");
1324 else if (pgaddr
== pd
->port_rcvegr_phys
)
1325 ret
= mmap_rcvegrbufs(vma
, pd
);
1326 else if (pgaddr
== (u64
) pd
->port_rcvhdrq_phys
)
1328 * The rcvhdrq itself; readonly except on HT (so have
1329 * to allow writable mapping), multiple pages, contiguous
1330 * from an i/o perspective.
1332 ret
= ipath_mmap_mem(vma
, pd
, pd
->port_rcvhdrq_size
, 1,
1335 else if (pgaddr
== (u64
) pd
->port_rcvhdrqtailaddr_phys
)
1336 /* in-memory copy of rcvhdrq tail register */
1337 ret
= ipath_mmap_mem(vma
, pd
, PAGE_SIZE
, 0,
1338 pd
->port_rcvhdrtail_kvaddr
,
1343 vma
->vm_private_data
= NULL
;
1346 dev_info(&dd
->pcidev
->dev
,
1347 "Failure %d on off %llx len %lx\n",
1348 -ret
, (unsigned long long)pgaddr
,
1349 vma
->vm_end
- vma
->vm_start
);
1354 static unsigned ipath_poll_hdrqfull(struct ipath_portdata
*pd
)
1356 unsigned pollflag
= 0;
1358 if ((pd
->poll_type
& IPATH_POLL_TYPE_OVERFLOW
) &&
1359 pd
->port_hdrqfull
!= pd
->port_hdrqfull_poll
) {
1360 pollflag
|= POLLIN
| POLLRDNORM
;
1361 pd
->port_hdrqfull_poll
= pd
->port_hdrqfull
;
1367 static unsigned int ipath_poll_urgent(struct ipath_portdata
*pd
,
1369 struct poll_table_struct
*pt
)
1371 unsigned pollflag
= 0;
1372 struct ipath_devdata
*dd
;
1376 /* variable access in ipath_poll_hdrqfull() needs this */
1378 pollflag
= ipath_poll_hdrqfull(pd
);
1380 if (pd
->port_urgent
!= pd
->port_urgent_poll
) {
1381 pollflag
|= POLLIN
| POLLRDNORM
;
1382 pd
->port_urgent_poll
= pd
->port_urgent
;
1386 /* this saves a spin_lock/unlock in interrupt handler... */
1387 set_bit(IPATH_PORT_WAITING_URG
, &pd
->port_flag
);
1388 /* flush waiting flag so don't miss an event... */
1390 poll_wait(fp
, &pd
->port_wait
, pt
);
1396 static unsigned int ipath_poll_next(struct ipath_portdata
*pd
,
1398 struct poll_table_struct
*pt
)
1402 unsigned pollflag
= 0;
1403 struct ipath_devdata
*dd
;
1407 /* variable access in ipath_poll_hdrqfull() needs this */
1409 pollflag
= ipath_poll_hdrqfull(pd
);
1411 head
= ipath_read_ureg32(dd
, ur_rcvhdrhead
, pd
->port_port
);
1412 if (pd
->port_rcvhdrtail_kvaddr
)
1413 tail
= ipath_get_rcvhdrtail(pd
);
1415 tail
= ipath_read_ureg32(dd
, ur_rcvhdrtail
, pd
->port_port
);
1418 pollflag
|= POLLIN
| POLLRDNORM
;
1420 /* this saves a spin_lock/unlock in interrupt handler */
1421 set_bit(IPATH_PORT_WAITING_RCV
, &pd
->port_flag
);
1422 /* flush waiting flag so we don't miss an event */
1425 set_bit(pd
->port_port
+ dd
->ipath_r_intravail_shift
,
1426 &dd
->ipath_rcvctrl
);
1428 ipath_write_kreg(dd
, dd
->ipath_kregs
->kr_rcvctrl
,
1431 if (dd
->ipath_rhdrhead_intr_off
) /* arm rcv interrupt */
1432 ipath_write_ureg(dd
, ur_rcvhdrhead
,
1433 dd
->ipath_rhdrhead_intr_off
| head
,
1436 poll_wait(fp
, &pd
->port_wait
, pt
);
1442 static unsigned int ipath_poll(struct file
*fp
,
1443 struct poll_table_struct
*pt
)
1445 struct ipath_portdata
*pd
;
1451 else if (pd
->poll_type
& IPATH_POLL_TYPE_URGENT
)
1452 pollflag
= ipath_poll_urgent(pd
, fp
, pt
);
1454 pollflag
= ipath_poll_next(pd
, fp
, pt
);
1459 static int ipath_supports_subports(int user_swmajor
, int user_swminor
)
1461 /* no subport implementation prior to software version 1.3 */
1462 return (user_swmajor
> 1) || (user_swminor
>= 3);
1465 static int ipath_compatible_subports(int user_swmajor
, int user_swminor
)
1467 /* this code is written long-hand for clarity */
1468 if (IPATH_USER_SWMAJOR
!= user_swmajor
) {
1469 /* no promise of compatibility if major mismatch */
1472 if (IPATH_USER_SWMAJOR
== 1) {
1473 switch (IPATH_USER_SWMINOR
) {
1477 /* no subport implementation so cannot be compatible */
1480 /* 3 is only compatible with itself */
1481 return user_swminor
== 3;
1483 /* >= 4 are compatible (or are expected to be) */
1484 return user_swminor
>= 4;
1487 /* make no promises yet for future major versions */
1491 static int init_subports(struct ipath_devdata
*dd
,
1492 struct ipath_portdata
*pd
,
1493 const struct ipath_user_info
*uinfo
)
1496 unsigned num_subports
;
1500 * If the user is requesting zero subports,
1501 * skip the subport allocation.
1503 if (uinfo
->spu_subport_cnt
<= 0)
1506 /* Self-consistency check for ipath_compatible_subports() */
1507 if (ipath_supports_subports(IPATH_USER_SWMAJOR
, IPATH_USER_SWMINOR
) &&
1508 !ipath_compatible_subports(IPATH_USER_SWMAJOR
,
1509 IPATH_USER_SWMINOR
)) {
1510 dev_info(&dd
->pcidev
->dev
,
1511 "Inconsistent ipath_compatible_subports()\n");
1515 /* Check for subport compatibility */
1516 if (!ipath_compatible_subports(uinfo
->spu_userversion
>> 16,
1517 uinfo
->spu_userversion
& 0xffff)) {
1518 dev_info(&dd
->pcidev
->dev
,
1519 "Mismatched user version (%d.%d) and driver "
1520 "version (%d.%d) while port sharing. Ensure "
1521 "that driver and library are from the same "
1523 (int) (uinfo
->spu_userversion
>> 16),
1524 (int) (uinfo
->spu_userversion
& 0xffff),
1526 IPATH_USER_SWMINOR
);
1529 if (uinfo
->spu_subport_cnt
> INFINIPATH_MAX_SUBPORT
) {
1534 num_subports
= uinfo
->spu_subport_cnt
;
1535 pd
->subport_uregbase
= vzalloc(PAGE_SIZE
* num_subports
);
1536 if (!pd
->subport_uregbase
) {
1540 /* Note: pd->port_rcvhdrq_size isn't initialized yet. */
1541 size
= ALIGN(dd
->ipath_rcvhdrcnt
* dd
->ipath_rcvhdrentsize
*
1542 sizeof(u32
), PAGE_SIZE
) * num_subports
;
1543 pd
->subport_rcvhdr_base
= vzalloc(size
);
1544 if (!pd
->subport_rcvhdr_base
) {
1549 pd
->subport_rcvegrbuf
= vzalloc(pd
->port_rcvegrbuf_chunks
*
1550 pd
->port_rcvegrbuf_size
*
1552 if (!pd
->subport_rcvegrbuf
) {
1557 pd
->port_subport_cnt
= uinfo
->spu_subport_cnt
;
1558 pd
->port_subport_id
= uinfo
->spu_subport_id
;
1559 pd
->active_slaves
= 1;
1560 set_bit(IPATH_PORT_MASTER_UNINIT
, &pd
->port_flag
);
1564 vfree(pd
->subport_rcvhdr_base
);
1566 vfree(pd
->subport_uregbase
);
1567 pd
->subport_uregbase
= NULL
;
1572 static int try_alloc_port(struct ipath_devdata
*dd
, int port
,
1574 const struct ipath_user_info
*uinfo
)
1576 struct ipath_portdata
*pd
;
1579 if (!(pd
= dd
->ipath_pd
[port
])) {
1582 pd
= kzalloc(sizeof(struct ipath_portdata
), GFP_KERNEL
);
1585 * Allocate memory for use in ipath_tid_update() just once
1586 * at open, not per call. Reduces cost of expected send
1589 ptmp
= kmalloc(dd
->ipath_rcvtidcnt
* sizeof(u16
) +
1590 dd
->ipath_rcvtidcnt
* sizeof(struct page
**),
1593 ipath_dev_err(dd
, "Unable to allocate portdata "
1594 "memory, failing open\n");
1600 dd
->ipath_pd
[port
] = pd
;
1601 dd
->ipath_pd
[port
]->port_port
= port
;
1602 dd
->ipath_pd
[port
]->port_dd
= dd
;
1603 dd
->ipath_pd
[port
]->port_tid_pg_list
= ptmp
;
1604 init_waitqueue_head(&dd
->ipath_pd
[port
]->port_wait
);
1606 if (!pd
->port_cnt
) {
1607 pd
->userversion
= uinfo
->spu_userversion
;
1608 init_user_egr_sizes(pd
);
1609 if ((ret
= init_subports(dd
, pd
, uinfo
)) != 0)
1611 ipath_cdbg(PROC
, "%s[%u] opened unit:port %u:%u\n",
1612 current
->comm
, current
->pid
, dd
->ipath_unit
,
1616 pd
->port_pid
= get_pid(task_pid(current
));
1617 strlcpy(pd
->port_comm
, current
->comm
, sizeof(pd
->port_comm
));
1618 ipath_stats
.sps_ports
++;
1627 static inline int usable(struct ipath_devdata
*dd
)
1630 (dd
->ipath_flags
& IPATH_PRESENT
) &&
1631 dd
->ipath_kregbase
&&
1633 !(dd
->ipath_flags
& (IPATH_LINKDOWN
| IPATH_DISABLED
1637 static int find_free_port(int unit
, struct file
*fp
,
1638 const struct ipath_user_info
*uinfo
)
1640 struct ipath_devdata
*dd
= ipath_lookup(unit
);
1653 for (i
= 1; i
< dd
->ipath_cfgports
; i
++) {
1654 ret
= try_alloc_port(dd
, i
, fp
, uinfo
);
1664 static int find_best_unit(struct file
*fp
,
1665 const struct ipath_user_info
*uinfo
)
1667 int ret
= 0, i
, prefunit
= -1, devmax
;
1668 int maxofallports
, npresent
, nup
;
1671 devmax
= ipath_count_units(&npresent
, &nup
, &maxofallports
);
1674 * This code is present to allow a knowledgeable person to
1675 * specify the layout of processes to processors before opening
1676 * this driver, and then we'll assign the process to the "closest"
1677 * InfiniPath chip to that processor (we assume reasonable connectivity,
1678 * for now). This code assumes that if affinity has been set
1679 * before this point, that at most one cpu is set; for now this
1680 * is reasonable. I check for both cpumask_empty() and cpumask_full(),
1681 * in case some kernel variant sets none of the bits when no
1682 * affinity is set. 2.6.11 and 12 kernels have all present
1683 * cpus set. Some day we'll have to fix it up further to handle
1684 * a cpu subset. This algorithm fails for two HT chips connected
1685 * in tunnel fashion. Eventually this needs real topology
1686 * information. There may be some issues with dual core numbering
1687 * as well. This needs more work prior to release.
1689 if (!cpumask_empty(tsk_cpus_allowed(current
)) &&
1690 !cpumask_full(tsk_cpus_allowed(current
))) {
1691 int ncpus
= num_online_cpus(), curcpu
= -1, nset
= 0;
1693 for_each_online_cpu(i
)
1694 if (cpumask_test_cpu(i
, tsk_cpus_allowed(current
))) {
1695 ipath_cdbg(PROC
, "%s[%u] affinity set for "
1696 "cpu %d/%d\n", current
->comm
,
1697 current
->pid
, i
, ncpus
);
1702 if (curcpu
!= -1 && nset
!= ncpus
) {
1704 prefunit
= curcpu
/ (ncpus
/ npresent
);
1705 ipath_cdbg(PROC
,"%s[%u] %d chips, %d cpus, "
1706 "%d cpus/chip, select unit %d\n",
1707 current
->comm
, current
->pid
,
1708 npresent
, ncpus
, ncpus
/ npresent
,
1715 * user ports start at 1, kernel port is 0
1716 * For now, we do round-robin access across all chips
1720 devmax
= prefunit
+ 1;
1722 for (i
= 1; i
< maxofallports
; i
++) {
1723 for (ndev
= prefunit
!= -1 ? prefunit
: 0; ndev
< devmax
;
1725 struct ipath_devdata
*dd
= ipath_lookup(ndev
);
1728 continue; /* can't use this unit */
1729 if (i
>= dd
->ipath_cfgports
)
1731 * Maxed out on users of this unit. Try
1735 ret
= try_alloc_port(dd
, i
, fp
, uinfo
);
1744 ipath_dbg("No ports available (none initialized "
1748 /* if started above 0, retry from 0 */
1750 "%s[%u] no ports on prefunit "
1751 "%d, clear and re-check\n",
1752 current
->comm
, current
->pid
,
1754 devmax
= ipath_count_units(NULL
, NULL
,
1760 ipath_dbg("No ports available\n");
1764 ipath_dbg("No boards found\n");
1771 static int find_shared_port(struct file
*fp
,
1772 const struct ipath_user_info
*uinfo
)
1774 int devmax
, ndev
, i
;
1777 devmax
= ipath_count_units(NULL
, NULL
, NULL
);
1779 for (ndev
= 0; ndev
< devmax
; ndev
++) {
1780 struct ipath_devdata
*dd
= ipath_lookup(ndev
);
1784 for (i
= 1; i
< dd
->ipath_cfgports
; i
++) {
1785 struct ipath_portdata
*pd
= dd
->ipath_pd
[i
];
1787 /* Skip ports which are not yet open */
1788 if (!pd
|| !pd
->port_cnt
)
1790 /* Skip port if it doesn't match the requested one */
1791 if (pd
->port_subport_id
!= uinfo
->spu_subport_id
)
1793 /* Verify the sharing process matches the master */
1794 if (pd
->port_subport_cnt
!= uinfo
->spu_subport_cnt
||
1795 pd
->userversion
!= uinfo
->spu_userversion
||
1796 pd
->port_cnt
>= pd
->port_subport_cnt
) {
1801 subport_fp(fp
) = pd
->port_cnt
++;
1802 pd
->port_subpid
[subport_fp(fp
)] =
1803 get_pid(task_pid(current
));
1804 tidcursor_fp(fp
) = 0;
1805 pd
->active_slaves
|= 1 << subport_fp(fp
);
1807 "%s[%u] %u sharing %s[%u] unit:port %u:%u\n",
1808 current
->comm
, current
->pid
,
1810 pd
->port_comm
, pid_nr(pd
->port_pid
),
1811 dd
->ipath_unit
, pd
->port_port
);
1821 static int ipath_open(struct inode
*in
, struct file
*fp
)
1823 /* The real work is performed later in ipath_assign_port() */
1824 fp
->private_data
= kzalloc(sizeof(struct ipath_filedata
), GFP_KERNEL
);
1825 return fp
->private_data
? 0 : -ENOMEM
;
1828 /* Get port early, so can set affinity prior to memory allocation */
1829 static int ipath_assign_port(struct file
*fp
,
1830 const struct ipath_user_info
*uinfo
)
1834 unsigned swmajor
, swminor
;
1836 /* Check to be sure we haven't already initialized this file */
1842 /* for now, if major version is different, bail */
1843 swmajor
= uinfo
->spu_userversion
>> 16;
1844 if (swmajor
!= IPATH_USER_SWMAJOR
) {
1845 ipath_dbg("User major version %d not same as driver "
1846 "major %d\n", uinfo
->spu_userversion
>> 16,
1847 IPATH_USER_SWMAJOR
);
1852 swminor
= uinfo
->spu_userversion
& 0xffff;
1853 if (swminor
!= IPATH_USER_SWMINOR
)
1854 ipath_dbg("User minor version %d not same as driver "
1855 "minor %d\n", swminor
, IPATH_USER_SWMINOR
);
1857 mutex_lock(&ipath_mutex
);
1859 if (ipath_compatible_subports(swmajor
, swminor
) &&
1860 uinfo
->spu_subport_cnt
&&
1861 (ret
= find_shared_port(fp
, uinfo
))) {
1867 i_minor
= iminor(fp
->f_path
.dentry
->d_inode
) - IPATH_USER_MINOR_BASE
;
1868 ipath_cdbg(VERBOSE
, "open on dev %lx (minor %d)\n",
1869 (long)fp
->f_path
.dentry
->d_inode
->i_rdev
, i_minor
);
1872 ret
= find_free_port(i_minor
- 1, fp
, uinfo
);
1874 ret
= find_best_unit(fp
, uinfo
);
1878 struct ipath_filedata
*fd
= fp
->private_data
;
1879 const struct ipath_portdata
*pd
= fd
->pd
;
1880 const struct ipath_devdata
*dd
= pd
->port_dd
;
1882 fd
->pq
= ipath_user_sdma_queue_create(&dd
->pcidev
->dev
,
1891 mutex_unlock(&ipath_mutex
);
1898 static int ipath_do_user_init(struct file
*fp
,
1899 const struct ipath_user_info
*uinfo
)
1902 struct ipath_portdata
*pd
= port_fp(fp
);
1903 struct ipath_devdata
*dd
;
1906 /* Subports don't need to initialize anything since master did it. */
1907 if (subport_fp(fp
)) {
1908 ret
= wait_event_interruptible(pd
->port_wait
,
1909 !test_bit(IPATH_PORT_MASTER_UNINIT
, &pd
->port_flag
));
1915 if (uinfo
->spu_rcvhdrsize
) {
1916 ret
= ipath_setrcvhdrsize(dd
, uinfo
->spu_rcvhdrsize
);
1921 /* for now we do nothing with rcvhdrcnt: uinfo->spu_rcvhdrcnt */
1923 /* some ports may get extra buffers, calculate that here */
1924 if (pd
->port_port
<= dd
->ipath_ports_extrabuf
)
1925 pd
->port_piocnt
= dd
->ipath_pbufsport
+ 1;
1927 pd
->port_piocnt
= dd
->ipath_pbufsport
;
1929 /* for right now, kernel piobufs are at end, so port 1 is at 0 */
1930 if (pd
->port_port
<= dd
->ipath_ports_extrabuf
)
1931 pd
->port_pio_base
= (dd
->ipath_pbufsport
+ 1)
1932 * (pd
->port_port
- 1);
1934 pd
->port_pio_base
= dd
->ipath_ports_extrabuf
+
1935 dd
->ipath_pbufsport
* (pd
->port_port
- 1);
1936 pd
->port_piobufs
= dd
->ipath_piobufbase
+
1937 pd
->port_pio_base
* dd
->ipath_palign
;
1938 ipath_cdbg(VERBOSE
, "piobuf base for port %u is 0x%x, piocnt %u,"
1939 " first pio %u\n", pd
->port_port
, pd
->port_piobufs
,
1940 pd
->port_piocnt
, pd
->port_pio_base
);
1941 ipath_chg_pioavailkernel(dd
, pd
->port_pio_base
, pd
->port_piocnt
, 0);
1944 * Now allocate the rcvhdr Q and eager TIDs; skip the TID
1945 * array for time being. If pd->port_port > chip-supported,
1946 * we need to do extra stuff here to handle by handling overflow
1947 * through port 0, someday
1949 ret
= ipath_create_rcvhdrq(dd
, pd
);
1951 ret
= ipath_create_user_egr(pd
);
1956 * set the eager head register for this port to the current values
1957 * of the tail pointers, since we don't know if they were
1958 * updated on last use of the port.
1960 head32
= ipath_read_ureg32(dd
, ur_rcvegrindextail
, pd
->port_port
);
1961 ipath_write_ureg(dd
, ur_rcvegrindexhead
, head32
, pd
->port_port
);
1962 pd
->port_lastrcvhdrqtail
= -1;
1963 ipath_cdbg(VERBOSE
, "Wrote port%d egrhead %x from tail regs\n",
1964 pd
->port_port
, head32
);
1965 pd
->port_tidcursor
= 0; /* start at beginning after open */
1967 /* initialize poll variables... */
1968 pd
->port_urgent
= 0;
1969 pd
->port_urgent_poll
= 0;
1970 pd
->port_hdrqfull_poll
= pd
->port_hdrqfull
;
1973 * Now enable the port for receive.
1974 * For chips that are set to DMA the tail register to memory
1975 * when they change (and when the update bit transitions from
1976 * 0 to 1. So for those chips, we turn it off and then back on.
1977 * This will (very briefly) affect any other open ports, but the
1978 * duration is very short, and therefore isn't an issue. We
1979 * explicitly set the in-memory tail copy to 0 beforehand, so we
1980 * don't have to wait to be sure the DMA update has happened
1981 * (chip resets head/tail to 0 on transition to enable).
1983 set_bit(dd
->ipath_r_portenable_shift
+ pd
->port_port
,
1984 &dd
->ipath_rcvctrl
);
1985 if (!(dd
->ipath_flags
& IPATH_NODMA_RTAIL
)) {
1986 if (pd
->port_rcvhdrtail_kvaddr
)
1987 ipath_clear_rcvhdrtail(pd
);
1988 ipath_write_kreg(dd
, dd
->ipath_kregs
->kr_rcvctrl
,
1990 ~(1ULL << dd
->ipath_r_tailupd_shift
));
1992 ipath_write_kreg(dd
, dd
->ipath_kregs
->kr_rcvctrl
,
1994 /* Notify any waiting slaves */
1995 if (pd
->port_subport_cnt
) {
1996 clear_bit(IPATH_PORT_MASTER_UNINIT
, &pd
->port_flag
);
1997 wake_up(&pd
->port_wait
);
2004 * unlock_exptid - unlock any expected TID entries port still had in use
2007 * We don't actually update the chip here, because we do a bulk update
2008 * below, using ipath_f_clear_tids.
2010 static void unlock_expected_tids(struct ipath_portdata
*pd
)
2012 struct ipath_devdata
*dd
= pd
->port_dd
;
2013 int port_tidbase
= pd
->port_port
* dd
->ipath_rcvtidcnt
;
2014 int i
, cnt
= 0, maxtid
= port_tidbase
+ dd
->ipath_rcvtidcnt
;
2016 ipath_cdbg(VERBOSE
, "Port %u unlocking any locked expTID pages\n",
2018 for (i
= port_tidbase
; i
< maxtid
; i
++) {
2019 struct page
*ps
= dd
->ipath_pageshadow
[i
];
2024 dd
->ipath_pageshadow
[i
] = NULL
;
2025 pci_unmap_page(dd
->pcidev
, dd
->ipath_physshadow
[i
],
2026 PAGE_SIZE
, PCI_DMA_FROMDEVICE
);
2027 ipath_release_user_pages_on_close(&ps
, 1);
2029 ipath_stats
.sps_pageunlocks
++;
2032 ipath_cdbg(VERBOSE
, "Port %u locked %u expTID entries\n",
2033 pd
->port_port
, cnt
);
2035 if (ipath_stats
.sps_pagelocks
|| ipath_stats
.sps_pageunlocks
)
2036 ipath_cdbg(VERBOSE
, "%llu pages locked, %llu unlocked\n",
2037 (unsigned long long) ipath_stats
.sps_pagelocks
,
2038 (unsigned long long)
2039 ipath_stats
.sps_pageunlocks
);
2042 static int ipath_close(struct inode
*in
, struct file
*fp
)
2045 struct ipath_filedata
*fd
;
2046 struct ipath_portdata
*pd
;
2047 struct ipath_devdata
*dd
;
2048 unsigned long flags
;
2052 ipath_cdbg(VERBOSE
, "close on dev %lx, private data %p\n",
2053 (long)in
->i_rdev
, fp
->private_data
);
2055 mutex_lock(&ipath_mutex
);
2057 fd
= fp
->private_data
;
2058 fp
->private_data
= NULL
;
2061 mutex_unlock(&ipath_mutex
);
2067 /* drain user sdma queue */
2068 ipath_user_sdma_queue_drain(dd
, fd
->pq
);
2069 ipath_user_sdma_queue_destroy(fd
->pq
);
2071 if (--pd
->port_cnt
) {
2073 * XXX If the master closes the port before the slave(s),
2074 * revoke the mmap for the eager receive queue so
2075 * the slave(s) don't wait for receive data forever.
2077 pd
->active_slaves
&= ~(1 << fd
->subport
);
2078 put_pid(pd
->port_subpid
[fd
->subport
]);
2079 pd
->port_subpid
[fd
->subport
] = NULL
;
2080 mutex_unlock(&ipath_mutex
);
2083 /* early; no interrupt users after this */
2084 spin_lock_irqsave(&dd
->ipath_uctxt_lock
, flags
);
2085 port
= pd
->port_port
;
2086 dd
->ipath_pd
[port
] = NULL
;
2088 pd
->port_pid
= NULL
;
2089 spin_unlock_irqrestore(&dd
->ipath_uctxt_lock
, flags
);
2091 if (pd
->port_rcvwait_to
|| pd
->port_piowait_to
2092 || pd
->port_rcvnowait
|| pd
->port_pionowait
) {
2093 ipath_cdbg(VERBOSE
, "port%u, %u rcv, %u pio wait timeo; "
2094 "%u rcv %u, pio already\n",
2095 pd
->port_port
, pd
->port_rcvwait_to
,
2096 pd
->port_piowait_to
, pd
->port_rcvnowait
,
2097 pd
->port_pionowait
);
2098 pd
->port_rcvwait_to
= pd
->port_piowait_to
=
2099 pd
->port_rcvnowait
= pd
->port_pionowait
= 0;
2101 if (pd
->port_flag
) {
2102 ipath_cdbg(PROC
, "port %u port_flag set: 0x%lx\n",
2103 pd
->port_port
, pd
->port_flag
);
2107 if (dd
->ipath_kregbase
) {
2108 /* atomically clear receive enable port and intr avail. */
2109 clear_bit(dd
->ipath_r_portenable_shift
+ port
,
2110 &dd
->ipath_rcvctrl
);
2111 clear_bit(pd
->port_port
+ dd
->ipath_r_intravail_shift
,
2112 &dd
->ipath_rcvctrl
);
2113 ipath_write_kreg( dd
, dd
->ipath_kregs
->kr_rcvctrl
,
2115 /* and read back from chip to be sure that nothing
2116 * else is in flight when we do the rest */
2117 (void)ipath_read_kreg64(dd
, dd
->ipath_kregs
->kr_scratch
);
2119 /* clean up the pkeys for this port user */
2120 ipath_clean_part_key(pd
, dd
);
2122 * be paranoid, and never write 0's to these, just use an
2123 * unused part of the port 0 tail page. Of course,
2124 * rcvhdraddr points to a large chunk of memory, so this
2125 * could still trash things, but at least it won't trash
2126 * page 0, and by disabling the port, it should stop "soon",
2127 * even if a packet or two is in already in flight after we
2128 * disabled the port.
2130 ipath_write_kreg_port(dd
,
2131 dd
->ipath_kregs
->kr_rcvhdrtailaddr
, port
,
2132 dd
->ipath_dummy_hdrq_phys
);
2133 ipath_write_kreg_port(dd
, dd
->ipath_kregs
->kr_rcvhdraddr
,
2134 pd
->port_port
, dd
->ipath_dummy_hdrq_phys
);
2136 ipath_disarm_piobufs(dd
, pd
->port_pio_base
, pd
->port_piocnt
);
2137 ipath_chg_pioavailkernel(dd
, pd
->port_pio_base
,
2138 pd
->port_piocnt
, 1);
2140 dd
->ipath_f_clear_tids(dd
, pd
->port_port
);
2142 if (dd
->ipath_pageshadow
)
2143 unlock_expected_tids(pd
);
2144 ipath_stats
.sps_ports
--;
2145 ipath_cdbg(PROC
, "%s[%u] closed port %u:%u\n",
2146 pd
->port_comm
, pid_nr(pid
),
2147 dd
->ipath_unit
, port
);
2151 mutex_unlock(&ipath_mutex
);
2152 ipath_free_pddata(dd
, pd
); /* after releasing the mutex */
2159 static int ipath_port_info(struct ipath_portdata
*pd
, u16 subport
,
2160 struct ipath_port_info __user
*uinfo
)
2162 struct ipath_port_info info
;
2167 (void) ipath_count_units(NULL
, &nup
, NULL
);
2168 info
.num_active
= nup
;
2169 info
.unit
= pd
->port_dd
->ipath_unit
;
2170 info
.port
= pd
->port_port
;
2171 info
.subport
= subport
;
2172 /* Don't return new fields if old library opened the port. */
2173 if (ipath_supports_subports(pd
->userversion
>> 16,
2174 pd
->userversion
& 0xffff)) {
2175 /* Number of user ports available for this device. */
2176 info
.num_ports
= pd
->port_dd
->ipath_cfgports
- 1;
2177 info
.num_subports
= pd
->port_subport_cnt
;
2180 sz
= sizeof(info
) - 2 * sizeof(u16
);
2182 if (copy_to_user(uinfo
, &info
, sz
)) {
2192 static int ipath_get_slave_info(struct ipath_portdata
*pd
,
2193 void __user
*slave_mask_addr
)
2197 if (copy_to_user(slave_mask_addr
, &pd
->active_slaves
, sizeof(u32
)))
2202 static int ipath_sdma_get_inflight(struct ipath_user_sdma_queue
*pq
,
2203 u32 __user
*inflightp
)
2205 const u32 val
= ipath_user_sdma_inflight_counter(pq
);
2207 if (put_user(val
, inflightp
))
2213 static int ipath_sdma_get_complete(struct ipath_devdata
*dd
,
2214 struct ipath_user_sdma_queue
*pq
,
2215 u32 __user
*completep
)
2220 err
= ipath_user_sdma_make_progress(dd
, pq
);
2224 val
= ipath_user_sdma_complete_counter(pq
);
2225 if (put_user(val
, completep
))
2231 static ssize_t
ipath_write(struct file
*fp
, const char __user
*data
,
2232 size_t count
, loff_t
*off
)
2234 const struct ipath_cmd __user
*ucmd
;
2235 struct ipath_portdata
*pd
;
2236 const void __user
*src
;
2237 size_t consumed
, copy
;
2238 struct ipath_cmd cmd
;
2242 if (count
< sizeof(cmd
.type
)) {
2247 ucmd
= (const struct ipath_cmd __user
*) data
;
2249 if (copy_from_user(&cmd
.type
, &ucmd
->type
, sizeof(cmd
.type
))) {
2254 consumed
= sizeof(cmd
.type
);
2257 case IPATH_CMD_ASSIGN_PORT
:
2258 case __IPATH_CMD_USER_INIT
:
2259 case IPATH_CMD_USER_INIT
:
2260 copy
= sizeof(cmd
.cmd
.user_info
);
2261 dest
= &cmd
.cmd
.user_info
;
2262 src
= &ucmd
->cmd
.user_info
;
2264 case IPATH_CMD_RECV_CTRL
:
2265 copy
= sizeof(cmd
.cmd
.recv_ctrl
);
2266 dest
= &cmd
.cmd
.recv_ctrl
;
2267 src
= &ucmd
->cmd
.recv_ctrl
;
2269 case IPATH_CMD_PORT_INFO
:
2270 copy
= sizeof(cmd
.cmd
.port_info
);
2271 dest
= &cmd
.cmd
.port_info
;
2272 src
= &ucmd
->cmd
.port_info
;
2274 case IPATH_CMD_TID_UPDATE
:
2275 case IPATH_CMD_TID_FREE
:
2276 copy
= sizeof(cmd
.cmd
.tid_info
);
2277 dest
= &cmd
.cmd
.tid_info
;
2278 src
= &ucmd
->cmd
.tid_info
;
2280 case IPATH_CMD_SET_PART_KEY
:
2281 copy
= sizeof(cmd
.cmd
.part_key
);
2282 dest
= &cmd
.cmd
.part_key
;
2283 src
= &ucmd
->cmd
.part_key
;
2285 case __IPATH_CMD_SLAVE_INFO
:
2286 copy
= sizeof(cmd
.cmd
.slave_mask_addr
);
2287 dest
= &cmd
.cmd
.slave_mask_addr
;
2288 src
= &ucmd
->cmd
.slave_mask_addr
;
2290 case IPATH_CMD_PIOAVAILUPD
: // force an update of PIOAvail reg
2295 case IPATH_CMD_POLL_TYPE
:
2296 copy
= sizeof(cmd
.cmd
.poll_type
);
2297 dest
= &cmd
.cmd
.poll_type
;
2298 src
= &ucmd
->cmd
.poll_type
;
2300 case IPATH_CMD_ARMLAUNCH_CTRL
:
2301 copy
= sizeof(cmd
.cmd
.armlaunch_ctrl
);
2302 dest
= &cmd
.cmd
.armlaunch_ctrl
;
2303 src
= &ucmd
->cmd
.armlaunch_ctrl
;
2305 case IPATH_CMD_SDMA_INFLIGHT
:
2306 copy
= sizeof(cmd
.cmd
.sdma_inflight
);
2307 dest
= &cmd
.cmd
.sdma_inflight
;
2308 src
= &ucmd
->cmd
.sdma_inflight
;
2310 case IPATH_CMD_SDMA_COMPLETE
:
2311 copy
= sizeof(cmd
.cmd
.sdma_complete
);
2312 dest
= &cmd
.cmd
.sdma_complete
;
2313 src
= &ucmd
->cmd
.sdma_complete
;
2321 if ((count
- consumed
) < copy
) {
2326 if (copy_from_user(dest
, src
, copy
)) {
2335 if (!pd
&& cmd
.type
!= __IPATH_CMD_USER_INIT
&&
2336 cmd
.type
!= IPATH_CMD_ASSIGN_PORT
) {
2342 case IPATH_CMD_ASSIGN_PORT
:
2343 ret
= ipath_assign_port(fp
, &cmd
.cmd
.user_info
);
2347 case __IPATH_CMD_USER_INIT
:
2348 /* backwards compatibility, get port first */
2349 ret
= ipath_assign_port(fp
, &cmd
.cmd
.user_info
);
2352 /* and fall through to current version. */
2353 case IPATH_CMD_USER_INIT
:
2354 ret
= ipath_do_user_init(fp
, &cmd
.cmd
.user_info
);
2357 ret
= ipath_get_base_info(
2358 fp
, (void __user
*) (unsigned long)
2359 cmd
.cmd
.user_info
.spu_base_info
,
2360 cmd
.cmd
.user_info
.spu_base_info_size
);
2362 case IPATH_CMD_RECV_CTRL
:
2363 ret
= ipath_manage_rcvq(pd
, subport_fp(fp
), cmd
.cmd
.recv_ctrl
);
2365 case IPATH_CMD_PORT_INFO
:
2366 ret
= ipath_port_info(pd
, subport_fp(fp
),
2367 (struct ipath_port_info __user
*)
2368 (unsigned long) cmd
.cmd
.port_info
);
2370 case IPATH_CMD_TID_UPDATE
:
2371 ret
= ipath_tid_update(pd
, fp
, &cmd
.cmd
.tid_info
);
2373 case IPATH_CMD_TID_FREE
:
2374 ret
= ipath_tid_free(pd
, subport_fp(fp
), &cmd
.cmd
.tid_info
);
2376 case IPATH_CMD_SET_PART_KEY
:
2377 ret
= ipath_set_part_key(pd
, cmd
.cmd
.part_key
);
2379 case __IPATH_CMD_SLAVE_INFO
:
2380 ret
= ipath_get_slave_info(pd
,
2381 (void __user
*) (unsigned long)
2382 cmd
.cmd
.slave_mask_addr
);
2384 case IPATH_CMD_PIOAVAILUPD
:
2385 ipath_force_pio_avail_update(pd
->port_dd
);
2387 case IPATH_CMD_POLL_TYPE
:
2388 pd
->poll_type
= cmd
.cmd
.poll_type
;
2390 case IPATH_CMD_ARMLAUNCH_CTRL
:
2391 if (cmd
.cmd
.armlaunch_ctrl
)
2392 ipath_enable_armlaunch(pd
->port_dd
);
2394 ipath_disable_armlaunch(pd
->port_dd
);
2396 case IPATH_CMD_SDMA_INFLIGHT
:
2397 ret
= ipath_sdma_get_inflight(user_sdma_queue_fp(fp
),
2398 (u32 __user
*) (unsigned long)
2399 cmd
.cmd
.sdma_inflight
);
2401 case IPATH_CMD_SDMA_COMPLETE
:
2402 ret
= ipath_sdma_get_complete(pd
->port_dd
,
2403 user_sdma_queue_fp(fp
),
2404 (u32 __user
*) (unsigned long)
2405 cmd
.cmd
.sdma_complete
);
2416 static ssize_t
ipath_writev(struct kiocb
*iocb
, const struct iovec
*iov
,
2417 unsigned long dim
, loff_t off
)
2419 struct file
*filp
= iocb
->ki_filp
;
2420 struct ipath_filedata
*fp
= filp
->private_data
;
2421 struct ipath_portdata
*pd
= port_fp(filp
);
2422 struct ipath_user_sdma_queue
*pq
= fp
->pq
;
2427 return ipath_user_sdma_writev(pd
->port_dd
, pq
, iov
, dim
);
2430 static struct class *ipath_class
;
2432 static int init_cdev(int minor
, char *name
, const struct file_operations
*fops
,
2433 struct cdev
**cdevp
, struct device
**devp
)
2435 const dev_t dev
= MKDEV(IPATH_MAJOR
, minor
);
2436 struct cdev
*cdev
= NULL
;
2437 struct device
*device
= NULL
;
2440 cdev
= cdev_alloc();
2442 printk(KERN_ERR IPATH_DRV_NAME
2443 ": Could not allocate cdev for minor %d, %s\n",
2449 cdev
->owner
= THIS_MODULE
;
2451 kobject_set_name(&cdev
->kobj
, name
);
2453 ret
= cdev_add(cdev
, dev
, 1);
2455 printk(KERN_ERR IPATH_DRV_NAME
2456 ": Could not add cdev for minor %d, %s (err %d)\n",
2461 device
= device_create(ipath_class
, NULL
, dev
, NULL
, name
);
2463 if (IS_ERR(device
)) {
2464 ret
= PTR_ERR(device
);
2465 printk(KERN_ERR IPATH_DRV_NAME
": Could not create "
2466 "device for minor %d, %s (err %d)\n",
2489 int ipath_cdev_init(int minor
, char *name
, const struct file_operations
*fops
,
2490 struct cdev
**cdevp
, struct device
**devp
)
2492 return init_cdev(minor
, name
, fops
, cdevp
, devp
);
2495 static void cleanup_cdev(struct cdev
**cdevp
,
2496 struct device
**devp
)
2498 struct device
*dev
= *devp
;
2501 device_unregister(dev
);
2511 void ipath_cdev_cleanup(struct cdev
**cdevp
,
2512 struct device
**devp
)
2514 cleanup_cdev(cdevp
, devp
);
2517 static struct cdev
*wildcard_cdev
;
2518 static struct device
*wildcard_dev
;
2520 static const dev_t dev
= MKDEV(IPATH_MAJOR
, 0);
2522 static int user_init(void)
2526 ret
= register_chrdev_region(dev
, IPATH_NMINORS
, IPATH_DRV_NAME
);
2528 printk(KERN_ERR IPATH_DRV_NAME
": Could not register "
2529 "chrdev region (err %d)\n", -ret
);
2533 ipath_class
= class_create(THIS_MODULE
, IPATH_DRV_NAME
);
2535 if (IS_ERR(ipath_class
)) {
2536 ret
= PTR_ERR(ipath_class
);
2537 printk(KERN_ERR IPATH_DRV_NAME
": Could not create "
2538 "device class (err %d)\n", -ret
);
2544 unregister_chrdev_region(dev
, IPATH_NMINORS
);
2549 static void user_cleanup(void)
2552 class_destroy(ipath_class
);
2556 unregister_chrdev_region(dev
, IPATH_NMINORS
);
2559 static atomic_t user_count
= ATOMIC_INIT(0);
2560 static atomic_t user_setup
= ATOMIC_INIT(0);
2562 int ipath_user_add(struct ipath_devdata
*dd
)
2567 if (atomic_inc_return(&user_count
) == 1) {
2570 ipath_dev_err(dd
, "Unable to set up user support: "
2571 "error %d\n", -ret
);
2574 ret
= init_cdev(0, "ipath", &ipath_file_ops
, &wildcard_cdev
,
2577 ipath_dev_err(dd
, "Could not create wildcard "
2578 "minor: error %d\n", -ret
);
2582 atomic_set(&user_setup
, 1);
2585 snprintf(name
, sizeof(name
), "ipath%d", dd
->ipath_unit
);
2587 ret
= init_cdev(dd
->ipath_unit
+ 1, name
, &ipath_file_ops
,
2588 &dd
->user_cdev
, &dd
->user_dev
);
2590 ipath_dev_err(dd
, "Could not create user minor %d, %s\n",
2591 dd
->ipath_unit
+ 1, name
);
2601 void ipath_user_remove(struct ipath_devdata
*dd
)
2603 cleanup_cdev(&dd
->user_cdev
, &dd
->user_dev
);
2605 if (atomic_dec_return(&user_count
) == 0) {
2606 if (atomic_read(&user_setup
) == 0)
2609 cleanup_cdev(&wildcard_cdev
, &wildcard_dev
);
2612 atomic_set(&user_setup
, 0);