?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Linux 3.4.102
[linux/fpc-iii.git] / drivers / net / ethernet / dec / tulip / eeprom.c
blobed7d1dcd95669279ae3393d3b03802af6e8ef5bc
1 /*
2 drivers/net/ethernet/dec/tulip/eeprom.c
3
4 Copyright 2000,2001 The Linux Kernel Team
5 Written/copyright 1994-2001 by Donald Becker.
6
7 This software may be used and distributed according to the terms
8 of the GNU General Public License, incorporated herein by reference.
9
10 Please submit bug reports to http://bugzilla.kernel.org/.
11 */
12
13 #include <linux/pci.h>
14 #include <linux/slab.h>
15 #include "tulip.h"
16 #include <linux/init.h>
17 #include <asm/unaligned.h>
18
19
20
21 /* Serial EEPROM section. */
22 /* The main routine to parse the very complicated SROM structure.
23 Search www.digital.com for "21X4 SROM" to get details.
24 This code is very complex, and will require changes to support
25 additional cards, so I'll be verbose about what is going on.
26 */
27
28 /* Known cards that have old-style EEPROMs. */
29 static struct eeprom_fixup eeprom_fixups[] __devinitdata = {
30 {"Asante", 0, 0, 0x94, {0x1e00, 0x0000, 0x0800, 0x0100, 0x018c,
31 0x0000, 0x0000, 0xe078, 0x0001, 0x0050, 0x0018 }},
32 {"SMC9332DST", 0, 0, 0xC0, { 0x1e00, 0x0000, 0x0800, 0x041f,
33 0x0000, 0x009E, /* 10baseT */
34 0x0004, 0x009E, /* 10baseT-FD */
35 0x0903, 0x006D, /* 100baseTx */
36 0x0905, 0x006D, /* 100baseTx-FD */ }},
37 {"Cogent EM100", 0, 0, 0x92, { 0x1e00, 0x0000, 0x0800, 0x063f,
38 0x0107, 0x8021, /* 100baseFx */
39 0x0108, 0x8021, /* 100baseFx-FD */
40 0x0100, 0x009E, /* 10baseT */
41 0x0104, 0x009E, /* 10baseT-FD */
42 0x0103, 0x006D, /* 100baseTx */
43 0x0105, 0x006D, /* 100baseTx-FD */ }},
44 {"Maxtech NX-110", 0, 0, 0xE8, { 0x1e00, 0x0000, 0x0800, 0x0513,
45 0x1001, 0x009E, /* 10base2, CSR12 0x10*/
46 0x0000, 0x009E, /* 10baseT */
47 0x0004, 0x009E, /* 10baseT-FD */
48 0x0303, 0x006D, /* 100baseTx, CSR12 0x03 */
49 0x0305, 0x006D, /* 100baseTx-FD CSR12 0x03 */}},
50 {"Accton EN1207", 0, 0, 0xE8, { 0x1e00, 0x0000, 0x0800, 0x051F,
51 0x1B01, 0x0000, /* 10base2, CSR12 0x1B */
52 0x0B00, 0x009E, /* 10baseT, CSR12 0x0B */
53 0x0B04, 0x009E, /* 10baseT-FD,CSR12 0x0B */
54 0x1B03, 0x006D, /* 100baseTx, CSR12 0x1B */
55 0x1B05, 0x006D, /* 100baseTx-FD CSR12 0x1B */
56 }},
57 {"NetWinder", 0x00, 0x10, 0x57,
58 /* Default media = MII
59 * MII block, reset sequence (3) = 0x0821 0x0000 0x0001, capabilities 0x01e1
60 */
61 { 0x1e00, 0x0000, 0x000b, 0x8f01, 0x0103, 0x0300, 0x0821, 0x000, 0x0001, 0x0000, 0x01e1 }
62 },
63 {"Cobalt Microserver", 0, 0x10, 0xE0, {0x1e00, /* 0 == controller #, 1e == offset */
64 0x0000, /* 0 == high offset, 0 == gap */
65 0x0800, /* Default Autoselect */
66 0x8001, /* 1 leaf, extended type, bogus len */
67 0x0003, /* Type 3 (MII), PHY #0 */
68 0x0400, /* 0 init instr, 4 reset instr */
69 0x0801, /* Set control mode, GP0 output */
70 0x0000, /* Drive GP0 Low (RST is active low) */
71 0x0800, /* control mode, GP0 input (undriven) */
72 0x0000, /* clear control mode */
73 0x7800, /* 100TX FDX + HDX, 10bT FDX + HDX */
74 0x01e0, /* Advertise all above */
75 0x5000, /* FDX all above */
76 0x1800, /* Set fast TTM in 100bt modes */
77 0x0000, /* PHY cannot be unplugged */
78 }},
79 {NULL}};
80
81
82 static const char *block_name[] __devinitdata = {
83 "21140 non-MII",
84 "21140 MII PHY",
85 "21142 Serial PHY",
86 "21142 MII PHY",
87 "21143 SYM PHY",
88 "21143 reset method"
89 };
90
91
92 /**
93 * tulip_build_fake_mediatable - Build a fake mediatable entry.
94 * @tp: Ptr to the tulip private data.
95 *
96 * Some cards like the 3x5 HSC cards (J3514A) do not have a standard
97 * srom and can not be handled under the fixup routine. These cards
98 * still need a valid mediatable entry for correct csr12 setup and
99 * mii handling.
100 *
101 * Since this is currently a parisc-linux specific function, the
102 * #ifdef __hppa__ should completely optimize this function away for
103 * non-parisc hardware.
104 */
105 static void __devinit tulip_build_fake_mediatable(struct tulip_private *tp)
106 {
107 #ifdef CONFIG_GSC
108 if (tp->flags & NEEDS_FAKE_MEDIA_TABLE) {
109 static unsigned char leafdata[] =
110 { 0x01, /* phy number */
111 0x02, /* gpr setup sequence length */
112 0x02, 0x00, /* gpr setup sequence */
113 0x02, /* phy reset sequence length */
114 0x01, 0x00, /* phy reset sequence */
115 0x00, 0x78, /* media capabilities */
116 0x00, 0xe0, /* nway advertisement */
117 0x00, 0x05, /* fdx bit map */
118 0x00, 0x06 /* ttm bit map */
119 };
120
121 tp->mtable = kmalloc(sizeof(struct mediatable) +
122 sizeof(struct medialeaf), GFP_KERNEL);
123
124 if (tp->mtable == NULL)
125 return; /* Horrible, impossible failure. */
126
127 tp->mtable->defaultmedia = 0x800;
128 tp->mtable->leafcount = 1;
129 tp->mtable->csr12dir = 0x3f; /* inputs on bit7 for hsc-pci, bit6 for pci-fx */
130 tp->mtable->has_nonmii = 0;
131 tp->mtable->has_reset = 0;
132 tp->mtable->has_mii = 1;
133 tp->mtable->csr15dir = tp->mtable->csr15val = 0;
134 tp->mtable->mleaf[0].type = 1;
135 tp->mtable->mleaf[0].media = 11;
136 tp->mtable->mleaf[0].leafdata = &leafdata[0];
137 tp->flags |= HAS_PHY_IRQ;
138 tp->csr12_shadow = -1;
139 }
140 #endif
141 }
142
143 void __devinit tulip_parse_eeprom(struct net_device *dev)
144 {
145 /*
146 dev is not registered at this point, so logging messages can't
147 use dev_<level> or netdev_<level> but dev->name is good via a
148 hack in the caller
149 */
150
151 /* The last media info list parsed, for multiport boards. */
152 static struct mediatable *last_mediatable;
153 static unsigned char *last_ee_data;
154 static int controller_index;
155 struct tulip_private *tp = netdev_priv(dev);
156 unsigned char *ee_data = tp->eeprom;
157 int i;
158
159 tp->mtable = NULL;
160 /* Detect an old-style (SA only) EEPROM layout:
161 memcmp(eedata, eedata+16, 8). */
162 for (i = 0; i < 8; i ++)
163 if (ee_data[i] != ee_data[16+i])
164 break;
165 if (i >= 8) {
166 if (ee_data[0] == 0xff) {
167 if (last_mediatable) {
168 controller_index++;
169 pr_info("%s: Controller %d of multiport board\n",
170 dev->name, controller_index);
171 tp->mtable = last_mediatable;
172 ee_data = last_ee_data;
173 goto subsequent_board;
174 } else
175 pr_info("%s: Missing EEPROM, this interface may not work correctly!\n",
176 dev->name);
177 return;
178 }
179 /* Do a fix-up based on the vendor half of the station address prefix. */
180 for (i = 0; eeprom_fixups[i].name; i++) {
181 if (dev->dev_addr[0] == eeprom_fixups[i].addr0 &&
182 dev->dev_addr[1] == eeprom_fixups[i].addr1 &&
183 dev->dev_addr[2] == eeprom_fixups[i].addr2) {
184 if (dev->dev_addr[2] == 0xE8 && ee_data[0x1a] == 0x55)
185 i++; /* An Accton EN1207, not an outlaw Maxtech. */
186 memcpy(ee_data + 26, eeprom_fixups[i].newtable,
187 sizeof(eeprom_fixups[i].newtable));
188 pr_info("%s: Old format EEPROM on '%s' board. Using substitute media control info\n",
189 dev->name, eeprom_fixups[i].name);
190 break;
191 }
192 }
193 if (eeprom_fixups[i].name == NULL) { /* No fixup found. */
194 pr_info("%s: Old style EEPROM with no media selection information\n",
195 dev->name);
196 return;
197 }
198 }
199
200 controller_index = 0;
201 if (ee_data[19] > 1) { /* Multiport board. */
202 last_ee_data = ee_data;
203 }
204 subsequent_board:
205
206 if (ee_data[27] == 0) { /* No valid media table. */
207 tulip_build_fake_mediatable(tp);
208 } else {
209 unsigned char *p = (void *)ee_data + ee_data[27];
210 unsigned char csr12dir = 0;
211 int count, new_advertise = 0;
212 struct mediatable *mtable;
213 u16 media = get_u16(p);
214
215 p += 2;
216 if (tp->flags & CSR12_IN_SROM)
217 csr12dir = *p++;
218 count = *p++;
219
220 /* there is no phy information, don't even try to build mtable */
221 if (count == 0) {
222 if (tulip_debug > 0)
223 pr_warn("%s: no phy info, aborting mtable build\n",
224 dev->name);
225 return;
226 }
227
228 mtable = kmalloc(sizeof(struct mediatable) +
229 count * sizeof(struct medialeaf),
230 GFP_KERNEL);
231 if (mtable == NULL)
232 return; /* Horrible, impossible failure. */
233 last_mediatable = tp->mtable = mtable;
234 mtable->defaultmedia = media;
235 mtable->leafcount = count;
236 mtable->csr12dir = csr12dir;
237 mtable->has_nonmii = mtable->has_mii = mtable->has_reset = 0;
238 mtable->csr15dir = mtable->csr15val = 0;
239
240 pr_info("%s: EEPROM default media type %s\n",
241 dev->name,
242 media & 0x0800 ? "Autosense"
243 : medianame[media & MEDIA_MASK]);
244 for (i = 0; i < count; i++) {
245 struct medialeaf *leaf = &mtable->mleaf[i];
246
247 if ((p[0] & 0x80) == 0) { /* 21140 Compact block. */
248 leaf->type = 0;
249 leaf->media = p[0] & 0x3f;
250 leaf->leafdata = p;
251 if ((p[2] & 0x61) == 0x01) /* Bogus, but Znyx boards do it. */
252 mtable->has_mii = 1;
253 p += 4;
254 } else {
255 leaf->type = p[1];
256 if (p[1] == 0x05) {
257 mtable->has_reset = i;
258 leaf->media = p[2] & 0x0f;
259 } else if (tp->chip_id == DM910X && p[1] == 0x80) {
260 /* Hack to ignore Davicom delay period block */
261 mtable->leafcount--;
262 count--;
263 i--;
264 leaf->leafdata = p + 2;
265 p += (p[0] & 0x3f) + 1;
266 continue;
267 } else if (p[1] & 1) {
268 int gpr_len, reset_len;
269
270 mtable->has_mii = 1;
271 leaf->media = 11;
272 gpr_len=p[3]*2;
273 reset_len=p[4+gpr_len]*2;
274 new_advertise |= get_u16(&p[7+gpr_len+reset_len]);
275 } else {
276 mtable->has_nonmii = 1;
277 leaf->media = p[2] & MEDIA_MASK;
278 /* Davicom's media number for 100BaseTX is strange */
279 if (tp->chip_id == DM910X && leaf->media == 1)
280 leaf->media = 3;
281 switch (leaf->media) {
282 case 0: new_advertise |= 0x0020; break;
283 case 4: new_advertise |= 0x0040; break;
284 case 3: new_advertise |= 0x0080; break;
285 case 5: new_advertise |= 0x0100; break;
286 case 6: new_advertise |= 0x0200; break;
287 }
288 if (p[1] == 2 && leaf->media == 0) {
289 if (p[2] & 0x40) {
290 u32 base15 = get_unaligned((u16*)&p[7]);
291 mtable->csr15dir =
292 (get_unaligned((u16*)&p[9])<<16) + base15;
293 mtable->csr15val =
294 (get_unaligned((u16*)&p[11])<<16) + base15;
295 } else {
296 mtable->csr15dir = get_unaligned((u16*)&p[3])<<16;
297 mtable->csr15val = get_unaligned((u16*)&p[5])<<16;
298 }
299 }
300 }
301 leaf->leafdata = p + 2;
302 p += (p[0] & 0x3f) + 1;
303 }
304 if (tulip_debug > 1 && leaf->media == 11) {
305 unsigned char *bp = leaf->leafdata;
306 pr_info("%s: MII interface PHY %d, setup/reset sequences %d/%d long, capabilities %02x %02x\n",
307 dev->name,
308 bp[0], bp[1], bp[2 + bp[1]*2],
309 bp[5 + bp[2 + bp[1]*2]*2],
310 bp[4 + bp[2 + bp[1]*2]*2]);
311 }
312 pr_info("%s: Index #%d - Media %s (#%d) described by a %s (%d) block\n",
313 dev->name,
314 i, medianame[leaf->media & 15], leaf->media,
315 leaf->type < ARRAY_SIZE(block_name) ? block_name[leaf->type] : "<unknown>",
316 leaf->type);
317 }
318 if (new_advertise)
319 tp->sym_advertise = new_advertise;
320 }
321 }
322 /* Reading a serial EEPROM is a "bit" grungy, but we work our way through:->.*/
323
324 /* EEPROM_Ctrl bits. */
325 #define EE_SHIFT_CLK 0x02 /* EEPROM shift clock. */
326 #define EE_CS 0x01 /* EEPROM chip select. */
327 #define EE_DATA_WRITE 0x04 /* Data from the Tulip to EEPROM. */
328 #define EE_WRITE_0 0x01
329 #define EE_WRITE_1 0x05
330 #define EE_DATA_READ 0x08 /* Data from the EEPROM chip. */
331 #define EE_ENB (0x4800 | EE_CS)
332
333 /* Delay between EEPROM clock transitions.
334 Even at 33Mhz current PCI implementations don't overrun the EEPROM clock.
335 We add a bus turn-around to insure that this remains true. */
336 #define eeprom_delay() ioread32(ee_addr)
337
338 /* The EEPROM commands include the alway-set leading bit. */
339 #define EE_READ_CMD (6)
340
341 /* Note: this routine returns extra data bits for size detection. */
342 int __devinit tulip_read_eeprom(struct net_device *dev, int location, int addr_len)
343 {
344 int i;
345 unsigned retval = 0;
346 struct tulip_private *tp = netdev_priv(dev);
347 void __iomem *ee_addr = tp->base_addr + CSR9;
348 int read_cmd = location | (EE_READ_CMD << addr_len);
349
350 /* If location is past the end of what we can address, don't
351 * read some other location (ie truncate). Just return zero.
352 */
353 if (location > (1 << addr_len) - 1)
354 return 0;
355
356 iowrite32(EE_ENB & ~EE_CS, ee_addr);
357 iowrite32(EE_ENB, ee_addr);
358
359 /* Shift the read command bits out. */
360 for (i = 4 + addr_len; i >= 0; i--) {
361 short dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
362 iowrite32(EE_ENB | dataval, ee_addr);
363 eeprom_delay();
364 iowrite32(EE_ENB | dataval | EE_SHIFT_CLK, ee_addr);
365 eeprom_delay();
366 retval = (retval << 1) | ((ioread32(ee_addr) & EE_DATA_READ) ? 1 : 0);
367 }
368 iowrite32(EE_ENB, ee_addr);
369 eeprom_delay();
370
371 for (i = 16; i > 0; i--) {
372 iowrite32(EE_ENB | EE_SHIFT_CLK, ee_addr);
373 eeprom_delay();
374 retval = (retval << 1) | ((ioread32(ee_addr) & EE_DATA_READ) ? 1 : 0);
375 iowrite32(EE_ENB, ee_addr);
376 eeprom_delay();
377 }
378
379 /* Terminate the EEPROM access. */
380 iowrite32(EE_ENB & ~EE_CS, ee_addr);
381 return (tp->flags & HAS_SWAPPED_SEEPROM) ? swab16(retval) : retval;
382 }
383
Linux with added FPC-III support