drivers/net/ethernet/dec/tulip/tulip.h

   1 /*
   2         drivers/net/ethernet/dec/tulip/tulip.h
   3
   4         Copyright 2000,2001  The Linux Kernel Team
   5         Written/copyright 1994-2001 by Donald Becker.
   6
   7         This software may be used and distributed according to the terms
   8         of the GNU General Public License, incorporated herein by reference.
   9
  10         Please submit bugs to http://bugzilla.kernel.org/ .
  11 */
  12
  13 #ifndef __NET_TULIP_H__
  14 #define __NET_TULIP_H__
  15
  16 #include <linux/kernel.h>
  17 #include <linux/types.h>
  18 #include <linux/spinlock.h>
  19 #include <linux/netdevice.h>
  20 #include <linux/ethtool.h>
  21 #include <linux/timer.h>
  22 #include <linux/delay.h>
  23 #include <linux/pci.h>
  24 #include <asm/io.h>
  25 #include <asm/irq.h>
  26 #include <asm/unaligned.h>
  27
  28
  29
  30 /* undefine, or define to various debugging levels (>4 == obscene levels) */
  31 #define TULIP_DEBUG 1
  32
  33 #ifdef CONFIG_TULIP_MMIO
  34 #define TULIP_BAR       1       /* CBMA */
  35 #else
  36 #define TULIP_BAR       0       /* CBIO */
  37 #endif
  38
  39
  40
  41 struct tulip_chip_table {
  42         char *chip_name;
  43         int io_size;
  44         int valid_intrs;        /* CSR7 interrupt enable settings */
  45         int flags;
  46         void (*media_timer) (unsigned long);
  47         work_func_t media_task;
  48 };
  49
  50
  51 enum tbl_flag {
  52         HAS_MII                 = 0x00001,
  53         HAS_MEDIA_TABLE         = 0x00002,
  54         CSR12_IN_SROM           = 0x00004,
  55         ALWAYS_CHECK_MII        = 0x00008,
  56         HAS_ACPI                = 0x00010,
  57         MC_HASH_ONLY            = 0x00020, /* Hash-only multicast filter. */
  58         HAS_PNICNWAY            = 0x00080,
  59         HAS_NWAY                = 0x00040, /* Uses internal NWay xcvr. */
  60         HAS_INTR_MITIGATION     = 0x00100,
  61         IS_ASIX                 = 0x00200,
  62         HAS_8023X               = 0x00400,
  63         COMET_MAC_ADDR          = 0x00800,
  64         HAS_PCI_MWI             = 0x01000,
  65         HAS_PHY_IRQ             = 0x02000,
  66         HAS_SWAPPED_SEEPROM     = 0x04000,
  67         NEEDS_FAKE_MEDIA_TABLE  = 0x08000,
  68         COMET_PM                = 0x10000,
  69 };
  70
  71
  72 /* chip types.  careful!  order is VERY IMPORTANT here, as these
  73  * are used throughout the driver as indices into arrays */
  74 /* Note 21142 == 21143. */
  75 enum chips {
  76         DC21040 = 0,
  77         DC21041 = 1,
  78         DC21140 = 2,
  79         DC21142 = 3, DC21143 = 3,
  80         LC82C168,
  81         MX98713,
  82         MX98715,
  83         MX98725,
  84         AX88140,
  85         PNIC2,
  86         COMET,
  87         COMPEX9881,
  88         I21145,
  89         DM910X,
  90         CONEXANT,
  91 };
  92
  93
  94 enum MediaIs {
  95         MediaIsFD = 1,
  96         MediaAlwaysFD = 2,
  97         MediaIsMII = 4,
  98         MediaIsFx = 8,
  99         MediaIs100 = 16
 100 };
 101
 102
 103 /* Offsets to the Command and Status Registers, "CSRs".  All accesses
 104    must be longword instructions and quadword aligned. */
 105 enum tulip_offsets {
 106         CSR0 = 0,
 107         CSR1 = 0x08,
 108         CSR2 = 0x10,
 109         CSR3 = 0x18,
 110         CSR4 = 0x20,
 111         CSR5 = 0x28,
 112         CSR6 = 0x30,
 113         CSR7 = 0x38,
 114         CSR8 = 0x40,
 115         CSR9 = 0x48,
 116         CSR10 = 0x50,
 117         CSR11 = 0x58,
 118         CSR12 = 0x60,
 119         CSR13 = 0x68,
 120         CSR14 = 0x70,
 121         CSR15 = 0x78,
 122         CSR18 = 0x88,
 123         CSR19 = 0x8c,
 124         CSR20 = 0x90,
 125         CSR27 = 0xAC,
 126         CSR28 = 0xB0,
 127 };
 128
 129 /* register offset and bits for CFDD PCI config reg */
 130 enum pci_cfg_driver_reg {
 131         CFDD = 0x40,
 132         CFDD_Sleep = (1 << 31),
 133         CFDD_Snooze = (1 << 30),
 134 };
 135
 136 #define RxPollInt (RxIntr|RxNoBuf|RxDied|RxJabber)
 137
 138 /* The bits in the CSR5 status registers, mostly interrupt sources. */
 139 enum status_bits {
 140         TimerInt = 0x800,
 141         SystemError = 0x2000,
 142         TPLnkFail = 0x1000,
 143         TPLnkPass = 0x10,
 144         NormalIntr = 0x10000,
 145         AbnormalIntr = 0x8000,
 146         RxJabber = 0x200,
 147         RxDied = 0x100,
 148         RxNoBuf = 0x80,
 149         RxIntr = 0x40,
 150         TxFIFOUnderflow = 0x20,
 151         RxErrIntr = 0x10,
 152         TxJabber = 0x08,
 153         TxNoBuf = 0x04,
 154         TxDied = 0x02,
 155         TxIntr = 0x01,
 156 };
 157
 158 /* bit mask for CSR5 TX/RX process state */
 159 #define CSR5_TS 0x00700000
 160 #define CSR5_RS 0x000e0000
 161
 162 enum tulip_mode_bits {
 163         TxThreshold             = (1 << 22),
 164         FullDuplex              = (1 << 9),
 165         TxOn                    = 0x2000,
 166         AcceptBroadcast         = 0x0100,
 167         AcceptAllMulticast      = 0x0080,
 168         AcceptAllPhys           = 0x0040,
 169         AcceptRunt              = 0x0008,
 170         RxOn                    = 0x0002,
 171         RxTx                    = (TxOn | RxOn),
 172 };
 173
 174
 175 enum tulip_busconfig_bits {
 176         MWI                     = (1 << 24),
 177         MRL                     = (1 << 23),
 178         MRM                     = (1 << 21),
 179         CALShift                = 14,
 180         BurstLenShift           = 8,
 181 };
 182
 183
 184 /* The Tulip Rx and Tx buffer descriptors. */
 185 struct tulip_rx_desc {
 186         __le32 status;
 187         __le32 length;
 188         __le32 buffer1;
 189         __le32 buffer2;
 190 };
 191
 192
 193 struct tulip_tx_desc {
 194         __le32 status;
 195         __le32 length;
 196         __le32 buffer1;
 197         __le32 buffer2;         /* We use only buffer 1.  */
 198 };
 199
 200
 201 enum desc_status_bits {
 202         DescOwned    = 0x80000000,
 203         DescWholePkt = 0x60000000,
 204         DescEndPkt   = 0x40000000,
 205         DescStartPkt = 0x20000000,
 206         DescEndRing  = 0x02000000,
 207         DescUseLink  = 0x01000000,
 208
 209         /*
 210          * Error summary flag is logical or of 'CRC Error', 'Collision Seen',
 211          * 'Frame Too Long', 'Runt' and 'Descriptor Error' flags generated
 212          * within tulip chip.
 213          */
 214         RxDescErrorSummary = 0x8000,
 215         RxDescCRCError = 0x0002,
 216         RxDescCollisionSeen = 0x0040,
 217
 218         /*
 219          * 'Frame Too Long' flag is set if packet length including CRC exceeds
 220          * 1518.  However, a full sized VLAN tagged frame is 1522 bytes
 221          * including CRC.
 222          *
 223          * The tulip chip does not block oversized frames, and if this flag is
 224          * set on a receive descriptor it does not indicate the frame has been
 225          * truncated.  The receive descriptor also includes the actual length.
 226          * Therefore we can safety ignore this flag and check the length
 227          * ourselves.
 228          */
 229         RxDescFrameTooLong = 0x0080,
 230         RxDescRunt = 0x0800,
 231         RxDescDescErr = 0x4000,
 232         RxWholePkt   = 0x00000300,
 233         /*
 234          * Top three bits of 14 bit frame length (status bits 27-29) should
 235          * never be set as that would make frame over 2047 bytes. The Receive
 236          * Watchdog flag (bit 4) may indicate the length is over 2048 and the
 237          * length field is invalid.
 238          */
 239         RxLengthOver2047 = 0x38000010
 240 };
 241
 242
 243 enum t21143_csr6_bits {
 244         csr6_sc = (1<<31),
 245         csr6_ra = (1<<30),
 246         csr6_ign_dest_msb = (1<<26),
 247         csr6_mbo = (1<<25),
 248         csr6_scr = (1<<24),  /* scramble mode flag: can't be set */
 249         csr6_pcs = (1<<23),  /* Enables PCS functions (symbol mode requires csr6_ps be set) default is set */
 250         csr6_ttm = (1<<22),  /* Transmit Threshold Mode, set for 10baseT, 0 for 100BaseTX */
 251         csr6_sf = (1<<21),   /* Store and forward. If set ignores TR bits */
 252         csr6_hbd = (1<<19),  /* Heart beat disable. Disables SQE function in 10baseT */
 253         csr6_ps = (1<<18),   /* Port Select. 0 (defualt) = 10baseT, 1 = 100baseTX: can't be set */
 254         csr6_ca = (1<<17),   /* Collision Offset Enable. If set uses special algorithm in low collision situations */
 255         csr6_trh = (1<<15),  /* Transmit Threshold high bit */
 256         csr6_trl = (1<<14),  /* Transmit Threshold low bit */
 257
 258         /***************************************************************
 259          * This table shows transmit threshold values based on media   *
 260          * and these two registers (from PNIC1 & 2 docs) Note: this is *
 261          * all meaningless if sf is set.                               *
 262          ***************************************************************/
 263
 264         /***********************************
 265          * (trh,trl) * 100BaseTX * 10BaseT *
 266          ***********************************
 267          *   (0,0)   *     128   *    72   *
 268          *   (0,1)   *     256   *    96   *
 269          *   (1,0)   *     512   *   128   *
 270          *   (1,1)   *    1024   *   160   *
 271          ***********************************/
 272
 273         csr6_fc = (1<<12),   /* Forces a collision in next transmission (for testing in loopback mode) */
 274         csr6_om_int_loop = (1<<10), /* internal (FIFO) loopback flag */
 275         csr6_om_ext_loop = (1<<11), /* external (PMD) loopback flag */
 276         /* set both and you get (PHY) loopback */
 277         csr6_fd = (1<<9),    /* Full duplex mode, disables hearbeat, no loopback */
 278         csr6_pm = (1<<7),    /* Pass All Multicast */
 279         csr6_pr = (1<<6),    /* Promiscuous mode */
 280         csr6_sb = (1<<5),    /* Start(1)/Stop(0) backoff counter */
 281         csr6_if = (1<<4),    /* Inverse Filtering, rejects only addresses in address table: can't be set */
 282         csr6_pb = (1<<3),    /* Pass Bad Frames, (1) causes even bad frames to be passed on */
 283         csr6_ho = (1<<2),    /* Hash-only filtering mode: can't be set */
 284         csr6_hp = (1<<0),    /* Hash/Perfect Receive Filtering Mode: can't be set */
 285
 286         csr6_mask_capture = (csr6_sc | csr6_ca),
 287         csr6_mask_defstate = (csr6_mask_capture | csr6_mbo),
 288         csr6_mask_hdcap = (csr6_mask_defstate | csr6_hbd | csr6_ps),
 289         csr6_mask_hdcaptt = (csr6_mask_hdcap  | csr6_trh | csr6_trl),
 290         csr6_mask_fullcap = (csr6_mask_hdcaptt | csr6_fd),
 291         csr6_mask_fullpromisc = (csr6_pr | csr6_pm),
 292         csr6_mask_filters = (csr6_hp | csr6_ho | csr6_if),
 293         csr6_mask_100bt = (csr6_scr | csr6_pcs | csr6_hbd),
 294 };
 295
 296 enum tulip_comet_csr13_bits {
 297 /* The LINKOFFE and LINKONE work in conjunction with LSCE, i.e. they
 298  * determine which link status transition wakes up if LSCE is
 299  * enabled */
 300         comet_csr13_linkoffe = (1 << 17),
 301         comet_csr13_linkone = (1 << 16),
 302         comet_csr13_wfre = (1 << 10),
 303         comet_csr13_mpre = (1 << 9),
 304         comet_csr13_lsce = (1 << 8),
 305         comet_csr13_wfr = (1 << 2),
 306         comet_csr13_mpr = (1 << 1),
 307         comet_csr13_lsc = (1 << 0),
 308 };
 309
 310 enum tulip_comet_csr18_bits {
 311         comet_csr18_pmes_sticky = (1 << 24),
 312         comet_csr18_pm_mode = (1 << 19),
 313         comet_csr18_apm_mode = (1 << 18),
 314         comet_csr18_d3a = (1 << 7)
 315 };
 316
 317 enum tulip_comet_csr20_bits {
 318         comet_csr20_pmes = (1 << 15),
 319 };
 320
 321 /* Keep the ring sizes a power of two for efficiency.
 322    Making the Tx ring too large decreases the effectiveness of channel
 323    bonding and packet priority.
 324    There are no ill effects from too-large receive rings. */
 325
 326 #define TX_RING_SIZE    32
 327 #define RX_RING_SIZE    128
 328 #define MEDIA_MASK     31
 329
 330 /* The receiver on the DC21143 rev 65 can fail to close the last
 331  * receive descriptor in certain circumstances (see errata) when
 332  * using MWI. This can only occur if the receive buffer ends on
 333  * a cache line boundary, so the "+ 4" below ensures it doesn't.
 334  */
 335 #define PKT_BUF_SZ      (1536 + 4)      /* Size of each temporary Rx buffer. */
 336
 337 #define TULIP_MIN_CACHE_LINE    8       /* in units of 32-bit words */
 338
 339 #if defined(__sparc__) || defined(__hppa__)
 340 /* The UltraSparc PCI controllers will disconnect at every 64-byte
 341  * crossing anyways so it makes no sense to tell Tulip to burst
 342  * any more than that.
 343  */
 344 #define TULIP_MAX_CACHE_LINE    16      /* in units of 32-bit words */
 345 #else
 346 #define TULIP_MAX_CACHE_LINE    32      /* in units of 32-bit words */
 347 #endif
 348
 349
 350 /* Ring-wrap flag in length field, use for last ring entry.
 351         0x01000000 means chain on buffer2 address,
 352         0x02000000 means use the ring start address in CSR2/3.
 353    Note: Some work-alike chips do not function correctly in chained mode.
 354    The ASIX chip works only in chained mode.
 355    Thus we indicates ring mode, but always write the 'next' field for
 356    chained mode as well.
 357 */
 358 #define DESC_RING_WRAP 0x02000000
 359
 360
 361 #define EEPROM_SIZE 512         /* 2 << EEPROM_ADDRLEN */
 362
 363
 364 #define RUN_AT(x) (jiffies + (x))
 365
 366 #define get_u16(ptr) get_unaligned_le16((ptr))
 367
 368 struct medialeaf {
 369         u8 type;
 370         u8 media;
 371         unsigned char *leafdata;
 372 };
 373
 374
 375 struct mediatable {
 376         u16 defaultmedia;
 377         u8 leafcount;
 378         u8 csr12dir;            /* General purpose pin directions. */
 379         unsigned has_mii:1;
 380         unsigned has_nonmii:1;
 381         unsigned has_reset:6;
 382         u32 csr15dir;
 383         u32 csr15val;           /* 21143 NWay setting. */
 384         struct medialeaf mleaf[0];
 385 };
 386
 387
 388 struct mediainfo {
 389         struct mediainfo *next;
 390         int info_type;
 391         int index;
 392         unsigned char *info;
 393 };
 394
 395 struct ring_info {
 396         struct sk_buff  *skb;
 397         dma_addr_t      mapping;
 398 };
 399
 400
 401 struct tulip_private {
 402         const char *product_name;
 403         struct net_device *next_module;
 404         struct tulip_rx_desc *rx_ring;
 405         struct tulip_tx_desc *tx_ring;
 406         dma_addr_t rx_ring_dma;
 407         dma_addr_t tx_ring_dma;
 408         /* The saved address of a sent-in-place packet/buffer, for skfree(). */
 409         struct ring_info tx_buffers[TX_RING_SIZE];
 410         /* The addresses of receive-in-place skbuffs. */
 411         struct ring_info rx_buffers[RX_RING_SIZE];
 412         u16 setup_frame[96];    /* Pseudo-Tx frame to init address table. */
 413         int chip_id;
 414         int revision;
 415         int flags;
 416         struct napi_struct napi;
 417         struct timer_list timer;        /* Media selection timer. */
 418         struct timer_list oom_timer;    /* Out of memory timer. */
 419         u32 mc_filter[2];
 420         spinlock_t lock;
 421         spinlock_t mii_lock;
 422         unsigned int cur_rx, cur_tx;    /* The next free ring entry */
 423         unsigned int dirty_rx, dirty_tx;        /* The ring entries to be free()ed. */
 424
 425 #ifdef  CONFIG_TULIP_NAPI_HW_MITIGATION
 426         int mit_on;
 427 #endif
 428         unsigned int full_duplex:1;     /* Full-duplex operation requested. */
 429         unsigned int full_duplex_lock:1;
 430         unsigned int fake_addr:1;       /* Multiport board faked address. */
 431         unsigned int default_port:4;    /* Last dev->if_port value. */
 432         unsigned int media2:4;  /* Secondary monitored media port. */
 433         unsigned int medialock:1;       /* Don't sense media type. */
 434         unsigned int mediasense:1;      /* Media sensing in progress. */
 435         unsigned int nway:1, nwayset:1;         /* 21143 internal NWay. */
 436         unsigned int timeout_recovery:1;
 437         unsigned int csr0;      /* CSR0 setting. */
 438         unsigned int csr6;      /* Current CSR6 control settings. */
 439         unsigned char eeprom[EEPROM_SIZE];      /* Serial EEPROM contents. */
 440         void (*link_change) (struct net_device * dev, int csr5);
 441         struct ethtool_wolinfo wolinfo;        /* WOL settings */
 442         u16 sym_advertise, mii_advertise; /* NWay capabilities advertised.  */
 443         u16 lpar;               /* 21143 Link partner ability. */
 444         u16 advertising[4];
 445         signed char phys[4], mii_cnt;   /* MII device addresses. */
 446         struct mediatable *mtable;
 447         int cur_index;          /* Current media index. */
 448         int saved_if_port;
 449         struct pci_dev *pdev;
 450         int ttimer;
 451         int susp_rx;
 452         unsigned long nir;
 453         void __iomem *base_addr;
 454         int csr12_shadow;
 455         int pad0;               /* Used for 8-byte alignment */
 456         struct work_struct media_work;
 457         struct net_device *dev;
 458 };
 459
 460
 461 struct eeprom_fixup {
 462         char *name;
 463         unsigned char addr0;
 464         unsigned char addr1;
 465         unsigned char addr2;
 466         u16 newtable[32];       /* Max length below. */
 467 };
 468
 469
 470 /* 21142.c */
 471 extern u16 t21142_csr14[];
 472 void t21142_media_task(struct work_struct *work);
 473 void t21142_start_nway(struct net_device *dev);
 474 void t21142_lnk_change(struct net_device *dev, int csr5);
 475
 476
 477 /* PNIC2.c */
 478 void pnic2_lnk_change(struct net_device *dev, int csr5);
 479 void pnic2_timer(unsigned long data);
 480 void pnic2_start_nway(struct net_device *dev);
 481 void pnic2_lnk_change(struct net_device *dev, int csr5);
 482
 483 /* eeprom.c */
 484 void tulip_parse_eeprom(struct net_device *dev);
 485 int tulip_read_eeprom(struct net_device *dev, int location, int addr_len);
 486
 487 /* interrupt.c */
 488 extern unsigned int tulip_max_interrupt_work;
 489 extern int tulip_rx_copybreak;
 490 irqreturn_t tulip_interrupt(int irq, void *dev_instance);
 491 int tulip_refill_rx(struct net_device *dev);
 492 #ifdef CONFIG_TULIP_NAPI
 493 int tulip_poll(struct napi_struct *napi, int budget);
 494 #endif
 495
 496
 497 /* media.c */
 498 int tulip_mdio_read(struct net_device *dev, int phy_id, int location);
 499 void tulip_mdio_write(struct net_device *dev, int phy_id, int location, int value);
 500 void tulip_select_media(struct net_device *dev, int startup);
 501 int tulip_check_duplex(struct net_device *dev);
 502 void tulip_find_mii (struct net_device *dev, int board_idx);
 503
 504 /* pnic.c */
 505 void pnic_do_nway(struct net_device *dev);
 506 void pnic_lnk_change(struct net_device *dev, int csr5);
 507 void pnic_timer(unsigned long data);
 508
 509 /* timer.c */
 510 void tulip_media_task(struct work_struct *work);
 511 void mxic_timer(unsigned long data);
 512 void comet_timer(unsigned long data);
 513
 514 /* tulip_core.c */
 515 extern int tulip_debug;
 516 extern const char * const medianame[];
 517 extern const char tulip_media_cap[];
 518 extern struct tulip_chip_table tulip_tbl[];
 519 void oom_timer(unsigned long data);
 520 extern u8 t21040_csr13[];
 521
 522 static inline void tulip_start_rxtx(struct tulip_private *tp)
 523 {
 524         void __iomem *ioaddr = tp->base_addr;
 525         iowrite32(tp->csr6 | RxTx, ioaddr + CSR6);
 526         barrier();
 527         (void) ioread32(ioaddr + CSR6); /* mmio sync */
 528 }
 529
 530 static inline void tulip_stop_rxtx(struct tulip_private *tp)
 531 {
 532         void __iomem *ioaddr = tp->base_addr;
 533         u32 csr6 = ioread32(ioaddr + CSR6);
 534
 535         if (csr6 & RxTx) {
 536                 unsigned i=1300/10;
 537                 iowrite32(csr6 & ~RxTx, ioaddr + CSR6);
 538                 barrier();
 539                 /* wait until in-flight frame completes.
 540                  * Max time @ 10BT: 1500*8b/10Mbps == 1200us (+ 100us margin)
 541                  * Typically expect this loop to end in < 50 us on 100BT.
 542                  */
 543                 while (--i && (ioread32(ioaddr + CSR5) & (CSR5_TS|CSR5_RS)))
 544                         udelay(10);
 545
 546                 if (!i)
 547                         netdev_dbg(tp->dev, "tulip_stop_rxtx() failed (CSR5 0x%x CSR6 0x%x)\n",
 548                                    ioread32(ioaddr + CSR5),
 549                                    ioread32(ioaddr + CSR6));
 550         }
 551 }
 552
 553 static inline void tulip_restart_rxtx(struct tulip_private *tp)
 554 {
 555         tulip_stop_rxtx(tp);
 556         udelay(5);
 557         tulip_start_rxtx(tp);
 558 }
 559
 560 static inline void tulip_tx_timeout_complete(struct tulip_private *tp, void __iomem *ioaddr)
 561 {
 562         /* Stop and restart the chip's Tx processes. */
 563         tulip_restart_rxtx(tp);
 564         /* Trigger an immediate transmit demand. */
 565         iowrite32(0, ioaddr + CSR1);
 566
 567         tp->dev->stats.tx_errors++;
 568 }
 569
 570 #endif /* __NET_TULIP_H__ */