drivers/net/ethernet/xilinx/ll_temac_mdio.c

   1 /*
   2  * MDIO bus driver for the Xilinx TEMAC device
   3  *
   4  * Copyright (c) 2009 Secret Lab Technologies, Ltd.
   5  */
   6
   7 #include <linux/io.h>
   8 #include <linux/netdevice.h>
   9 #include <linux/mutex.h>
  10 #include <linux/phy.h>
  11 #include <linux/of.h>
  12 #include <linux/of_device.h>
  13 #include <linux/of_address.h>
  14 #include <linux/slab.h>
  15 #include <linux/of_mdio.h>
  16
  17 #include "ll_temac.h"
  18
  19 /* ---------------------------------------------------------------------
  20  * MDIO Bus functions
  21  */
  22 static int temac_mdio_read(struct mii_bus *bus, int phy_id, int reg)
  23 {
  24         struct temac_local *lp = bus->priv;
  25         u32 rc;
  26
  27         /* Write the PHY address to the MIIM Access Initiator register.
  28          * When the transfer completes, the PHY register value will appear
  29          * in the LSW0 register */
  30         mutex_lock(&lp->indirect_mutex);
  31         temac_iow(lp, XTE_LSW0_OFFSET, (phy_id << 5) | reg);
  32         rc = temac_indirect_in32(lp, XTE_MIIMAI_OFFSET);
  33         mutex_unlock(&lp->indirect_mutex);
  34
  35         dev_dbg(lp->dev, "temac_mdio_read(phy_id=%i, reg=%x) == %x\n",
  36                 phy_id, reg, rc);
  37
  38         return rc;
  39 }
  40
  41 static int temac_mdio_write(struct mii_bus *bus, int phy_id, int reg, u16 val)
  42 {
  43         struct temac_local *lp = bus->priv;
  44
  45         dev_dbg(lp->dev, "temac_mdio_write(phy_id=%i, reg=%x, val=%x)\n",
  46                 phy_id, reg, val);
  47
  48         /* First write the desired value into the write data register
  49          * and then write the address into the access initiator register
  50          */
  51         mutex_lock(&lp->indirect_mutex);
  52         temac_indirect_out32(lp, XTE_MGTDR_OFFSET, val);
  53         temac_indirect_out32(lp, XTE_MIIMAI_OFFSET, (phy_id << 5) | reg);
  54         mutex_unlock(&lp->indirect_mutex);
  55
  56         return 0;
  57 }
  58
  59 int temac_mdio_setup(struct temac_local *lp, struct device_node *np)
  60 {
  61         struct mii_bus *bus;
  62         const u32 *bus_hz;
  63         int clk_div;
  64         int rc, size;
  65         struct resource res;
  66
  67         /* Calculate a reasonable divisor for the clock rate */
  68         clk_div = 0x3f; /* worst-case default setting */
  69         bus_hz = of_get_property(np, "clock-frequency", &size);
  70         if (bus_hz && size >= sizeof(*bus_hz)) {
  71                 clk_div = (*bus_hz) / (2500 * 1000 * 2) - 1;
  72                 if (clk_div < 1)
  73                         clk_div = 1;
  74                 if (clk_div > 0x3f)
  75                         clk_div = 0x3f;
  76         }
  77
  78         /* Enable the MDIO bus by asserting the enable bit and writing
  79          * in the clock config */
  80         mutex_lock(&lp->indirect_mutex);
  81         temac_indirect_out32(lp, XTE_MC_OFFSET, 1 << 6 | clk_div);
  82         mutex_unlock(&lp->indirect_mutex);
  83
  84         bus = mdiobus_alloc();
  85         if (!bus)
  86                 return -ENOMEM;
  87
  88         of_address_to_resource(np, 0, &res);
  89         snprintf(bus->id, MII_BUS_ID_SIZE, "%.8llx",
  90                  (unsigned long long)res.start);
  91         bus->priv = lp;
  92         bus->name = "Xilinx TEMAC MDIO";
  93         bus->read = temac_mdio_read;
  94         bus->write = temac_mdio_write;
  95         bus->parent = lp->dev;
  96         bus->irq = lp->mdio_irqs; /* preallocated IRQ table */
  97
  98         lp->mii_bus = bus;
  99
 100         rc = of_mdiobus_register(bus, np);
 101         if (rc)
 102                 goto err_register;
 103
 104         mutex_lock(&lp->indirect_mutex);
 105         dev_dbg(lp->dev, "MDIO bus registered;  MC:%x\n",
 106                 temac_indirect_in32(lp, XTE_MC_OFFSET));
 107         mutex_unlock(&lp->indirect_mutex);
 108         return 0;
 109
 110  err_register:
 111         mdiobus_free(bus);
 112         return rc;
 113 }
 114
 115 void temac_mdio_teardown(struct temac_local *lp)
 116 {
 117         mdiobus_unregister(lp->mii_bus);
 118         kfree(lp->mii_bus->irq);
 119         mdiobus_free(lp->mii_bus);
 120         lp->mii_bus = NULL;
 121 }
 122