?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Linux 3.4.102
[linux/fpc-iii.git] / drivers / net / wan / pc300too.c
blob5fe246e060d7b8288f933e8f83856eade0e37271
1 /*
2 * Cyclades PC300 synchronous serial card driver for Linux
3 *
4 * Copyright (C) 2000-2008 Krzysztof Halasa <khc@pm.waw.pl>
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of version 2 of the GNU General Public License
8 * as published by the Free Software Foundation.
9 *
10 * For information see <http://www.kernel.org/pub/linux/utils/net/hdlc/>.
11 *
12 * Sources of information:
13 * Hitachi HD64572 SCA-II User's Manual
14 * Original Cyclades PC300 Linux driver
15 *
16 * This driver currently supports only PC300/RSV (V.24/V.35) and
17 * PC300/X21 cards.
18 */
19
20 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
21
22 #include <linux/module.h>
23 #include <linux/kernel.h>
24 #include <linux/slab.h>
25 #include <linux/sched.h>
26 #include <linux/types.h>
27 #include <linux/fcntl.h>
28 #include <linux/in.h>
29 #include <linux/string.h>
30 #include <linux/errno.h>
31 #include <linux/init.h>
32 #include <linux/ioport.h>
33 #include <linux/moduleparam.h>
34 #include <linux/netdevice.h>
35 #include <linux/hdlc.h>
36 #include <linux/pci.h>
37 #include <linux/delay.h>
38 #include <asm/io.h>
39
40 #include "hd64572.h"
41
42 #undef DEBUG_PKT
43 #define DEBUG_RINGS
44
45 #define PC300_PLX_SIZE 0x80 /* PLX control window size (128 B) */
46 #define PC300_SCA_SIZE 0x400 /* SCA window size (1 KB) */
47 #define MAX_TX_BUFFERS 10
48
49 static int pci_clock_freq = 33000000;
50 static int use_crystal_clock = 0;
51 static unsigned int CLOCK_BASE;
52
53 /* Masks to access the init_ctrl PLX register */
54 #define PC300_CLKSEL_MASK (0x00000004UL)
55 #define PC300_CHMEDIA_MASK(port) (0x00000020UL << ((port) * 3))
56 #define PC300_CTYPE_MASK (0x00000800UL)
57
58
59 enum { PC300_RSV = 1, PC300_X21, PC300_TE }; /* card types */
60
61 /*
62 * PLX PCI9050-1 local configuration and shared runtime registers.
63 * This structure can be used to access 9050 registers (memory mapped).
64 */
65 typedef struct {
66 u32 loc_addr_range[4]; /* 00-0Ch : Local Address Ranges */
67 u32 loc_rom_range; /* 10h : Local ROM Range */
68 u32 loc_addr_base[4]; /* 14-20h : Local Address Base Addrs */
69 u32 loc_rom_base; /* 24h : Local ROM Base */
70 u32 loc_bus_descr[4]; /* 28-34h : Local Bus Descriptors */
71 u32 rom_bus_descr; /* 38h : ROM Bus Descriptor */
72 u32 cs_base[4]; /* 3C-48h : Chip Select Base Addrs */
73 u32 intr_ctrl_stat; /* 4Ch : Interrupt Control/Status */
74 u32 init_ctrl; /* 50h : EEPROM ctrl, Init Ctrl, etc */
75 }plx9050;
76
77
78
79 typedef struct port_s {
80 struct napi_struct napi;
81 struct net_device *netdev;
82 struct card_s *card;
83 spinlock_t lock; /* TX lock */
84 sync_serial_settings settings;
85 int rxpart; /* partial frame received, next frame invalid*/
86 unsigned short encoding;
87 unsigned short parity;
88 unsigned int iface;
89 u16 rxin; /* rx ring buffer 'in' pointer */
90 u16 txin; /* tx ring buffer 'in' and 'last' pointers */
91 u16 txlast;
92 u8 rxs, txs, tmc; /* SCA registers */
93 u8 chan; /* physical port # - 0 or 1 */
94 }port_t;
95
96
97
98 typedef struct card_s {
99 int type; /* RSV, X21, etc. */
100 int n_ports; /* 1 or 2 ports */
101 u8 __iomem *rambase; /* buffer memory base (virtual) */
102 u8 __iomem *scabase; /* SCA memory base (virtual) */
103 plx9050 __iomem *plxbase; /* PLX registers memory base (virtual) */
104 u32 init_ctrl_value; /* Saved value - 9050 bug workaround */
105 u16 rx_ring_buffers; /* number of buffers in a ring */
106 u16 tx_ring_buffers;
107 u16 buff_offset; /* offset of first buffer of first channel */
108 u8 irq; /* interrupt request level */
109
110 port_t ports[2];
111 }card_t;
112
113
114 #define get_port(card, port) ((port) < (card)->n_ports ? \
115 (&(card)->ports[port]) : (NULL))
116
117 #include "hd64572.c"
118
119
120 static void pc300_set_iface(port_t *port)
121 {
122 card_t *card = port->card;
123 u32 __iomem * init_ctrl = &card->plxbase->init_ctrl;
124 u16 msci = get_msci(port);
125 u8 rxs = port->rxs & CLK_BRG_MASK;
126 u8 txs = port->txs & CLK_BRG_MASK;
127
128 sca_out(EXS_TES1, (port->chan ? MSCI1_OFFSET : MSCI0_OFFSET) + EXS,
129 port->card);
130 switch(port->settings.clock_type) {
131 case CLOCK_INT:
132 rxs |= CLK_BRG; /* BRG output */
133 txs |= CLK_PIN_OUT | CLK_TX_RXCLK; /* RX clock */
134 break;
135
136 case CLOCK_TXINT:
137 rxs |= CLK_LINE; /* RXC input */
138 txs |= CLK_PIN_OUT | CLK_BRG; /* BRG output */
139 break;
140
141 case CLOCK_TXFROMRX:
142 rxs |= CLK_LINE; /* RXC input */
143 txs |= CLK_PIN_OUT | CLK_TX_RXCLK; /* RX clock */
144 break;
145
146 default: /* EXTernal clock */
147 rxs |= CLK_LINE; /* RXC input */
148 txs |= CLK_PIN_OUT | CLK_LINE; /* TXC input */
149 break;
150 }
151
152 port->rxs = rxs;
153 port->txs = txs;
154 sca_out(rxs, msci + RXS, card);
155 sca_out(txs, msci + TXS, card);
156 sca_set_port(port);
157
158 if (port->card->type == PC300_RSV) {
159 if (port->iface == IF_IFACE_V35)
160 writel(card->init_ctrl_value |
161 PC300_CHMEDIA_MASK(port->chan), init_ctrl);
162 else
163 writel(card->init_ctrl_value &
164 ~PC300_CHMEDIA_MASK(port->chan), init_ctrl);
165 }
166 }
167
168
169
170 static int pc300_open(struct net_device *dev)
171 {
172 port_t *port = dev_to_port(dev);
173
174 int result = hdlc_open(dev);
175 if (result)
176 return result;
177
178 sca_open(dev);
179 pc300_set_iface(port);
180 return 0;
181 }
182
183
184
185 static int pc300_close(struct net_device *dev)
186 {
187 sca_close(dev);
188 hdlc_close(dev);
189 return 0;
190 }
191
192
193
194 static int pc300_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
195 {
196 const size_t size = sizeof(sync_serial_settings);
197 sync_serial_settings new_line;
198 sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
199 int new_type;
200 port_t *port = dev_to_port(dev);
201
202 #ifdef DEBUG_RINGS
203 if (cmd == SIOCDEVPRIVATE) {
204 sca_dump_rings(dev);
205 return 0;
206 }
207 #endif
208 if (cmd != SIOCWANDEV)
209 return hdlc_ioctl(dev, ifr, cmd);
210
211 if (ifr->ifr_settings.type == IF_GET_IFACE) {
212 ifr->ifr_settings.type = port->iface;
213 if (ifr->ifr_settings.size < size) {
214 ifr->ifr_settings.size = size; /* data size wanted */
215 return -ENOBUFS;
216 }
217 if (copy_to_user(line, &port->settings, size))
218 return -EFAULT;
219 return 0;
220
221 }
222
223 if (port->card->type == PC300_X21 &&
224 (ifr->ifr_settings.type == IF_IFACE_SYNC_SERIAL ||
225 ifr->ifr_settings.type == IF_IFACE_X21))
226 new_type = IF_IFACE_X21;
227
228 else if (port->card->type == PC300_RSV &&
229 (ifr->ifr_settings.type == IF_IFACE_SYNC_SERIAL ||
230 ifr->ifr_settings.type == IF_IFACE_V35))
231 new_type = IF_IFACE_V35;
232
233 else if (port->card->type == PC300_RSV &&
234 ifr->ifr_settings.type == IF_IFACE_V24)
235 new_type = IF_IFACE_V24;
236
237 else
238 return hdlc_ioctl(dev, ifr, cmd);
239
240 if (!capable(CAP_NET_ADMIN))
241 return -EPERM;
242
243 if (copy_from_user(&new_line, line, size))
244 return -EFAULT;
245
246 if (new_line.clock_type != CLOCK_EXT &&
247 new_line.clock_type != CLOCK_TXFROMRX &&
248 new_line.clock_type != CLOCK_INT &&
249 new_line.clock_type != CLOCK_TXINT)
250 return -EINVAL; /* No such clock setting */
251
252 if (new_line.loopback != 0 && new_line.loopback != 1)
253 return -EINVAL;
254
255 memcpy(&port->settings, &new_line, size); /* Update settings */
256 port->iface = new_type;
257 pc300_set_iface(port);
258 return 0;
259 }
260
261
262
263 static void pc300_pci_remove_one(struct pci_dev *pdev)
264 {
265 int i;
266 card_t *card = pci_get_drvdata(pdev);
267
268 for (i = 0; i < 2; i++)
269 if (card->ports[i].card)
270 unregister_hdlc_device(card->ports[i].netdev);
271
272 if (card->irq)
273 free_irq(card->irq, card);
274
275 if (card->rambase)
276 iounmap(card->rambase);
277 if (card->scabase)
278 iounmap(card->scabase);
279 if (card->plxbase)
280 iounmap(card->plxbase);
281
282 pci_release_regions(pdev);
283 pci_disable_device(pdev);
284 pci_set_drvdata(pdev, NULL);
285 if (card->ports[0].netdev)
286 free_netdev(card->ports[0].netdev);
287 if (card->ports[1].netdev)
288 free_netdev(card->ports[1].netdev);
289 kfree(card);
290 }
291
292 static const struct net_device_ops pc300_ops = {
293 .ndo_open = pc300_open,
294 .ndo_stop = pc300_close,
295 .ndo_change_mtu = hdlc_change_mtu,
296 .ndo_start_xmit = hdlc_start_xmit,
297 .ndo_do_ioctl = pc300_ioctl,
298 };
299
300 static int __devinit pc300_pci_init_one(struct pci_dev *pdev,
301 const struct pci_device_id *ent)
302 {
303 card_t *card;
304 u32 __iomem *p;
305 int i;
306 u32 ramsize;
307 u32 ramphys; /* buffer memory base */
308 u32 scaphys; /* SCA memory base */
309 u32 plxphys; /* PLX registers memory base */
310
311 i = pci_enable_device(pdev);
312 if (i)
313 return i;
314
315 i = pci_request_regions(pdev, "PC300");
316 if (i) {
317 pci_disable_device(pdev);
318 return i;
319 }
320
321 card = kzalloc(sizeof(card_t), GFP_KERNEL);
322 if (card == NULL) {
323 pci_release_regions(pdev);
324 pci_disable_device(pdev);
325 return -ENOBUFS;
326 }
327 pci_set_drvdata(pdev, card);
328
329 if (pci_resource_len(pdev, 0) != PC300_PLX_SIZE ||
330 pci_resource_len(pdev, 2) != PC300_SCA_SIZE ||
331 pci_resource_len(pdev, 3) < 16384) {
332 pr_err("invalid card EEPROM parameters\n");
333 pc300_pci_remove_one(pdev);
334 return -EFAULT;
335 }
336
337 plxphys = pci_resource_start(pdev, 0) & PCI_BASE_ADDRESS_MEM_MASK;
338 card->plxbase = ioremap(plxphys, PC300_PLX_SIZE);
339
340 scaphys = pci_resource_start(pdev, 2) & PCI_BASE_ADDRESS_MEM_MASK;
341 card->scabase = ioremap(scaphys, PC300_SCA_SIZE);
342
343 ramphys = pci_resource_start(pdev, 3) & PCI_BASE_ADDRESS_MEM_MASK;
344 card->rambase = pci_ioremap_bar(pdev, 3);
345
346 if (card->plxbase == NULL ||
347 card->scabase == NULL ||
348 card->rambase == NULL) {
349 pr_err("ioremap() failed\n");
350 pc300_pci_remove_one(pdev);
351 }
352
353 /* PLX PCI 9050 workaround for local configuration register read bug */
354 pci_write_config_dword(pdev, PCI_BASE_ADDRESS_0, scaphys);
355 card->init_ctrl_value = readl(&((plx9050 __iomem *)card->scabase)->init_ctrl);
356 pci_write_config_dword(pdev, PCI_BASE_ADDRESS_0, plxphys);
357
358 if (pdev->device == PCI_DEVICE_ID_PC300_TE_1 ||
359 pdev->device == PCI_DEVICE_ID_PC300_TE_2)
360 card->type = PC300_TE; /* not fully supported */
361 else if (card->init_ctrl_value & PC300_CTYPE_MASK)
362 card->type = PC300_X21;
363 else
364 card->type = PC300_RSV;
365
366 if (pdev->device == PCI_DEVICE_ID_PC300_RX_1 ||
367 pdev->device == PCI_DEVICE_ID_PC300_TE_1)
368 card->n_ports = 1;
369 else
370 card->n_ports = 2;
371
372 for (i = 0; i < card->n_ports; i++)
373 if (!(card->ports[i].netdev = alloc_hdlcdev(&card->ports[i]))) {
374 pr_err("unable to allocate memory\n");
375 pc300_pci_remove_one(pdev);
376 return -ENOMEM;
377 }
378
379 /* Reset PLX */
380 p = &card->plxbase->init_ctrl;
381 writel(card->init_ctrl_value | 0x40000000, p);
382 readl(p); /* Flush the write - do not use sca_flush */
383 udelay(1);
384
385 writel(card->init_ctrl_value, p);
386 readl(p); /* Flush the write - do not use sca_flush */
387 udelay(1);
388
389 /* Reload Config. Registers from EEPROM */
390 writel(card->init_ctrl_value | 0x20000000, p);
391 readl(p); /* Flush the write - do not use sca_flush */
392 udelay(1);
393
394 writel(card->init_ctrl_value, p);
395 readl(p); /* Flush the write - do not use sca_flush */
396 udelay(1);
397
398 ramsize = sca_detect_ram(card, card->rambase,
399 pci_resource_len(pdev, 3));
400
401 if (use_crystal_clock)
402 card->init_ctrl_value &= ~PC300_CLKSEL_MASK;
403 else
404 card->init_ctrl_value |= PC300_CLKSEL_MASK;
405
406 writel(card->init_ctrl_value, &card->plxbase->init_ctrl);
407 /* number of TX + RX buffers for one port */
408 i = ramsize / (card->n_ports * (sizeof(pkt_desc) + HDLC_MAX_MRU));
409 card->tx_ring_buffers = min(i / 2, MAX_TX_BUFFERS);
410 card->rx_ring_buffers = i - card->tx_ring_buffers;
411
412 card->buff_offset = card->n_ports * sizeof(pkt_desc) *
413 (card->tx_ring_buffers + card->rx_ring_buffers);
414
415 pr_info("PC300/%s, %u KB RAM at 0x%x, IRQ%u, using %u TX + %u RX packets rings\n",
416 card->type == PC300_X21 ? "X21" :
417 card->type == PC300_TE ? "TE" : "RSV",
418 ramsize / 1024, ramphys, pdev->irq,
419 card->tx_ring_buffers, card->rx_ring_buffers);
420
421 if (card->tx_ring_buffers < 1) {
422 pr_err("RAM test failed\n");
423 pc300_pci_remove_one(pdev);
424 return -EFAULT;
425 }
426
427 /* Enable interrupts on the PCI bridge, LINTi1 active low */
428 writew(0x0041, &card->plxbase->intr_ctrl_stat);
429
430 /* Allocate IRQ */
431 if (request_irq(pdev->irq, sca_intr, IRQF_SHARED, "pc300", card)) {
432 pr_warn("could not allocate IRQ%d\n", pdev->irq);
433 pc300_pci_remove_one(pdev);
434 return -EBUSY;
435 }
436 card->irq = pdev->irq;
437
438 sca_init(card, 0);
439
440 // COTE not set - allows better TX DMA settings
441 // sca_out(sca_in(PCR, card) | PCR_COTE, PCR, card);
442
443 sca_out(0x10, BTCR, card);
444
445 for (i = 0; i < card->n_ports; i++) {
446 port_t *port = &card->ports[i];
447 struct net_device *dev = port->netdev;
448 hdlc_device *hdlc = dev_to_hdlc(dev);
449 port->chan = i;
450
451 spin_lock_init(&port->lock);
452 dev->irq = card->irq;
453 dev->mem_start = ramphys;
454 dev->mem_end = ramphys + ramsize - 1;
455 dev->tx_queue_len = 50;
456 dev->netdev_ops = &pc300_ops;
457 hdlc->attach = sca_attach;
458 hdlc->xmit = sca_xmit;
459 port->settings.clock_type = CLOCK_EXT;
460 port->card = card;
461 if (card->type == PC300_X21)
462 port->iface = IF_IFACE_X21;
463 else
464 port->iface = IF_IFACE_V35;
465
466 sca_init_port(port);
467 if (register_hdlc_device(dev)) {
468 pr_err("unable to register hdlc device\n");
469 port->card = NULL;
470 pc300_pci_remove_one(pdev);
471 return -ENOBUFS;
472 }
473
474 netdev_info(dev, "PC300 channel %d\n", port->chan);
475 }
476 return 0;
477 }
478
479
480
481 static DEFINE_PCI_DEVICE_TABLE(pc300_pci_tbl) = {
482 { PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_PC300_RX_1, PCI_ANY_ID,
483 PCI_ANY_ID, 0, 0, 0 },
484 { PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_PC300_RX_2, PCI_ANY_ID,
485 PCI_ANY_ID, 0, 0, 0 },
486 { PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_PC300_TE_1, PCI_ANY_ID,
487 PCI_ANY_ID, 0, 0, 0 },
488 { PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_PC300_TE_2, PCI_ANY_ID,
489 PCI_ANY_ID, 0, 0, 0 },
490 { 0, }
491 };
492
493
494 static struct pci_driver pc300_pci_driver = {
495 .name = "PC300",
496 .id_table = pc300_pci_tbl,
497 .probe = pc300_pci_init_one,
498 .remove = pc300_pci_remove_one,
499 };
500
501
502 static int __init pc300_init_module(void)
503 {
504 if (pci_clock_freq < 1000000 || pci_clock_freq > 80000000) {
505 pr_err("Invalid PCI clock frequency\n");
506 return -EINVAL;
507 }
508 if (use_crystal_clock != 0 && use_crystal_clock != 1) {
509 pr_err("Invalid 'use_crystal_clock' value\n");
510 return -EINVAL;
511 }
512
513 CLOCK_BASE = use_crystal_clock ? 24576000 : pci_clock_freq;
514
515 return pci_register_driver(&pc300_pci_driver);
516 }
517
518
519
520 static void __exit pc300_cleanup_module(void)
521 {
522 pci_unregister_driver(&pc300_pci_driver);
523 }
524
525 MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>");
526 MODULE_DESCRIPTION("Cyclades PC300 serial port driver");
527 MODULE_LICENSE("GPL v2");
528 MODULE_DEVICE_TABLE(pci, pc300_pci_tbl);
529 module_param(pci_clock_freq, int, 0444);
530 MODULE_PARM_DESC(pci_clock_freq, "System PCI clock frequency in Hz");
531 module_param(use_crystal_clock, int, 0444);
532 MODULE_PARM_DESC(use_crystal_clock,
533 "Use 24.576 MHz clock instead of PCI clock");
534 module_init(pc300_init_module);
535 module_exit(pc300_cleanup_module);
Linux with added FPC-III support