2 * SPI bus driver for the Topcliff PCH used by Intel SoCs
4 * Copyright (C) 2011 LAPIS Semiconductor Co., Ltd.
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; version 2 of the License.
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
20 #include <linux/delay.h>
21 #include <linux/pci.h>
22 #include <linux/wait.h>
23 #include <linux/spi/spi.h>
24 #include <linux/interrupt.h>
25 #include <linux/sched.h>
26 #include <linux/spi/spidev.h>
27 #include <linux/module.h>
28 #include <linux/device.h>
29 #include <linux/platform_device.h>
31 #include <linux/dmaengine.h>
32 #include <linux/pch_dma.h>
34 /* Register offsets */
35 #define PCH_SPCR 0x00 /* SPI control register */
36 #define PCH_SPBRR 0x04 /* SPI baud rate register */
37 #define PCH_SPSR 0x08 /* SPI status register */
38 #define PCH_SPDWR 0x0C /* SPI write data register */
39 #define PCH_SPDRR 0x10 /* SPI read data register */
40 #define PCH_SSNXCR 0x18 /* SSN Expand Control Register */
41 #define PCH_SRST 0x1C /* SPI reset register */
42 #define PCH_ADDRESS_SIZE 0x20
44 #define PCH_SPSR_TFD 0x000007C0
45 #define PCH_SPSR_RFD 0x0000F800
47 #define PCH_READABLE(x) (((x) & PCH_SPSR_RFD)>>11)
48 #define PCH_WRITABLE(x) (((x) & PCH_SPSR_TFD)>>6)
50 #define PCH_RX_THOLD 7
51 #define PCH_RX_THOLD_MAX 15
53 #define PCH_TX_THOLD 2
55 #define PCH_MAX_BAUDRATE 5000000
56 #define PCH_MAX_FIFO_DEPTH 16
58 #define STATUS_RUNNING 1
59 #define STATUS_EXITING 2
60 #define PCH_SLEEP_TIME 10
63 #define SSN_HIGH 0x03U
64 #define SSN_NO_CONTROL 0x00U
65 #define PCH_MAX_CS 0xFF
66 #define PCI_DEVICE_ID_GE_SPI 0x8816
68 #define SPCR_SPE_BIT (1 << 0)
69 #define SPCR_MSTR_BIT (1 << 1)
70 #define SPCR_LSBF_BIT (1 << 4)
71 #define SPCR_CPHA_BIT (1 << 5)
72 #define SPCR_CPOL_BIT (1 << 6)
73 #define SPCR_TFIE_BIT (1 << 8)
74 #define SPCR_RFIE_BIT (1 << 9)
75 #define SPCR_FIE_BIT (1 << 10)
76 #define SPCR_ORIE_BIT (1 << 11)
77 #define SPCR_MDFIE_BIT (1 << 12)
78 #define SPCR_FICLR_BIT (1 << 24)
79 #define SPSR_TFI_BIT (1 << 0)
80 #define SPSR_RFI_BIT (1 << 1)
81 #define SPSR_FI_BIT (1 << 2)
82 #define SPSR_ORF_BIT (1 << 3)
83 #define SPBRR_SIZE_BIT (1 << 10)
85 #define PCH_ALL (SPCR_TFIE_BIT|SPCR_RFIE_BIT|SPCR_FIE_BIT|\
86 SPCR_ORIE_BIT|SPCR_MDFIE_BIT)
88 #define SPCR_RFIC_FIELD 20
89 #define SPCR_TFIC_FIELD 16
91 #define MASK_SPBRR_SPBR_BITS ((1 << 10) - 1)
92 #define MASK_RFIC_SPCR_BITS (0xf << SPCR_RFIC_FIELD)
93 #define MASK_TFIC_SPCR_BITS (0xf << SPCR_TFIC_FIELD)
95 #define PCH_CLOCK_HZ 50000000
96 #define PCH_MAX_SPBR 1023
98 /* Definition for ML7213/ML7223/ML7831 by LAPIS Semiconductor */
99 #define PCI_VENDOR_ID_ROHM 0x10DB
100 #define PCI_DEVICE_ID_ML7213_SPI 0x802c
101 #define PCI_DEVICE_ID_ML7223_SPI 0x800F
102 #define PCI_DEVICE_ID_ML7831_SPI 0x8816
105 * Set the number of SPI instance max
106 * Intel EG20T PCH : 1ch
107 * LAPIS Semiconductor ML7213 IOH : 2ch
108 * LAPIS Semiconductor ML7223 IOH : 1ch
109 * LAPIS Semiconductor ML7831 IOH : 1ch
111 #define PCH_SPI_MAX_DEV 2
113 #define PCH_BUF_SIZE 4096
114 #define PCH_DMA_TRANS_SIZE 12
116 static int use_dma
= 1;
118 struct pch_spi_dma_ctrl
{
119 struct dma_async_tx_descriptor
*desc_tx
;
120 struct dma_async_tx_descriptor
*desc_rx
;
121 struct pch_dma_slave param_tx
;
122 struct pch_dma_slave param_rx
;
123 struct dma_chan
*chan_tx
;
124 struct dma_chan
*chan_rx
;
125 struct scatterlist
*sg_tx_p
;
126 struct scatterlist
*sg_rx_p
;
127 struct scatterlist sg_tx
;
128 struct scatterlist sg_rx
;
132 dma_addr_t tx_buf_dma
;
133 dma_addr_t rx_buf_dma
;
136 * struct pch_spi_data - Holds the SPI channel specific details
137 * @io_remap_addr: The remapped PCI base address
138 * @master: Pointer to the SPI master structure
139 * @work: Reference to work queue handler
140 * @wk: Workqueue for carrying out execution of the
142 * @wait: Wait queue for waking up upon receiving an
144 * @transfer_complete: Status of SPI Transfer
145 * @bcurrent_msg_processing: Status flag for message processing
146 * @lock: Lock for protecting this structure
147 * @queue: SPI Message queue
148 * @status: Status of the SPI driver
149 * @bpw_len: Length of data to be transferred in bits per
151 * @transfer_active: Flag showing active transfer
152 * @tx_index: Transmit data count; for bookkeeping during
154 * @rx_index: Receive data count; for bookkeeping during
156 * @tx_buff: Buffer for data to be transmitted
157 * @rx_index: Buffer for Received data
158 * @n_curnt_chip: The chip number that this SPI driver currently
160 * @current_chip: Reference to the current chip that this SPI
161 * driver currently operates on
162 * @current_msg: The current message that this SPI driver is
164 * @cur_trans: The current transfer that this SPI driver is
166 * @board_dat: Reference to the SPI device data structure
167 * @plat_dev: platform_device structure
168 * @ch: SPI channel number
169 * @irq_reg_sts: Status of IRQ registration
171 struct pch_spi_data
{
172 void __iomem
*io_remap_addr
;
173 unsigned long io_base_addr
;
174 struct spi_master
*master
;
175 struct work_struct work
;
176 struct workqueue_struct
*wk
;
177 wait_queue_head_t wait
;
178 u8 transfer_complete
;
179 u8 bcurrent_msg_processing
;
181 struct list_head queue
;
190 struct spi_device
*current_chip
;
191 struct spi_message
*current_msg
;
192 struct spi_transfer
*cur_trans
;
193 struct pch_spi_board_data
*board_dat
;
194 struct platform_device
*plat_dev
;
196 struct pch_spi_dma_ctrl dma
;
203 * struct pch_spi_board_data - Holds the SPI device specific details
204 * @pdev: Pointer to the PCI device
205 * @suspend_sts: Status of suspend
206 * @num: The number of SPI device instance
208 struct pch_spi_board_data
{
209 struct pci_dev
*pdev
;
214 struct pch_pd_dev_save
{
216 struct platform_device
*pd_save
[PCH_SPI_MAX_DEV
];
217 struct pch_spi_board_data
*board_dat
;
220 static DEFINE_PCI_DEVICE_TABLE(pch_spi_pcidev_id
) = {
221 { PCI_VDEVICE(INTEL
, PCI_DEVICE_ID_GE_SPI
), 1, },
222 { PCI_VDEVICE(ROHM
, PCI_DEVICE_ID_ML7213_SPI
), 2, },
223 { PCI_VDEVICE(ROHM
, PCI_DEVICE_ID_ML7223_SPI
), 1, },
224 { PCI_VDEVICE(ROHM
, PCI_DEVICE_ID_ML7831_SPI
), 1, },
229 * pch_spi_writereg() - Performs register writes
230 * @master: Pointer to struct spi_master.
231 * @idx: Register offset.
232 * @val: Value to be written to register.
234 static inline void pch_spi_writereg(struct spi_master
*master
, int idx
, u32 val
)
236 struct pch_spi_data
*data
= spi_master_get_devdata(master
);
237 iowrite32(val
, (data
->io_remap_addr
+ idx
));
241 * pch_spi_readreg() - Performs register reads
242 * @master: Pointer to struct spi_master.
243 * @idx: Register offset.
245 static inline u32
pch_spi_readreg(struct spi_master
*master
, int idx
)
247 struct pch_spi_data
*data
= spi_master_get_devdata(master
);
248 return ioread32(data
->io_remap_addr
+ idx
);
251 static inline void pch_spi_setclr_reg(struct spi_master
*master
, int idx
,
254 u32 tmp
= pch_spi_readreg(master
, idx
);
255 tmp
= (tmp
& ~clr
) | set
;
256 pch_spi_writereg(master
, idx
, tmp
);
259 static void pch_spi_set_master_mode(struct spi_master
*master
)
261 pch_spi_setclr_reg(master
, PCH_SPCR
, SPCR_MSTR_BIT
, 0);
265 * pch_spi_clear_fifo() - Clears the Transmit and Receive FIFOs
266 * @master: Pointer to struct spi_master.
268 static void pch_spi_clear_fifo(struct spi_master
*master
)
270 pch_spi_setclr_reg(master
, PCH_SPCR
, SPCR_FICLR_BIT
, 0);
271 pch_spi_setclr_reg(master
, PCH_SPCR
, 0, SPCR_FICLR_BIT
);
274 static void pch_spi_handler_sub(struct pch_spi_data
*data
, u32 reg_spsr_val
,
275 void __iomem
*io_remap_addr
)
277 u32 n_read
, tx_index
, rx_index
, bpw_len
;
278 u16
*pkt_rx_buffer
, *pkt_tx_buff
;
285 spsr
= io_remap_addr
+ PCH_SPSR
;
286 iowrite32(reg_spsr_val
, spsr
);
288 if (data
->transfer_active
) {
289 rx_index
= data
->rx_index
;
290 tx_index
= data
->tx_index
;
291 bpw_len
= data
->bpw_len
;
292 pkt_rx_buffer
= data
->pkt_rx_buff
;
293 pkt_tx_buff
= data
->pkt_tx_buff
;
295 spdrr
= io_remap_addr
+ PCH_SPDRR
;
296 spdwr
= io_remap_addr
+ PCH_SPDWR
;
298 n_read
= PCH_READABLE(reg_spsr_val
);
300 for (read_cnt
= 0; (read_cnt
< n_read
); read_cnt
++) {
301 pkt_rx_buffer
[rx_index
++] = ioread32(spdrr
);
302 if (tx_index
< bpw_len
)
303 iowrite32(pkt_tx_buff
[tx_index
++], spdwr
);
306 /* disable RFI if not needed */
307 if ((bpw_len
- rx_index
) <= PCH_MAX_FIFO_DEPTH
) {
308 reg_spcr_val
= ioread32(io_remap_addr
+ PCH_SPCR
);
309 reg_spcr_val
&= ~SPCR_RFIE_BIT
; /* disable RFI */
311 /* reset rx threshold */
312 reg_spcr_val
&= ~MASK_RFIC_SPCR_BITS
;
313 reg_spcr_val
|= (PCH_RX_THOLD_MAX
<< SPCR_RFIC_FIELD
);
315 iowrite32(reg_spcr_val
, (io_remap_addr
+ PCH_SPCR
));
319 data
->tx_index
= tx_index
;
320 data
->rx_index
= rx_index
;
322 /* if transfer complete interrupt */
323 if (reg_spsr_val
& SPSR_FI_BIT
) {
324 if ((tx_index
== bpw_len
) && (rx_index
== tx_index
)) {
325 /* disable interrupts */
326 pch_spi_setclr_reg(data
->master
, PCH_SPCR
, 0,
329 /* transfer is completed;
330 inform pch_spi_process_messages */
331 data
->transfer_complete
= true;
332 data
->transfer_active
= false;
333 wake_up(&data
->wait
);
335 dev_err(&data
->master
->dev
,
336 "%s : Transfer is not completed",
344 * pch_spi_handler() - Interrupt handler
345 * @irq: The interrupt number.
346 * @dev_id: Pointer to struct pch_spi_board_data.
348 static irqreturn_t
pch_spi_handler(int irq
, void *dev_id
)
352 void __iomem
*io_remap_addr
;
353 irqreturn_t ret
= IRQ_NONE
;
354 struct pch_spi_data
*data
= dev_id
;
355 struct pch_spi_board_data
*board_dat
= data
->board_dat
;
357 if (board_dat
->suspend_sts
) {
358 dev_dbg(&board_dat
->pdev
->dev
,
359 "%s returning due to suspend\n", __func__
);
363 io_remap_addr
= data
->io_remap_addr
;
364 spsr
= io_remap_addr
+ PCH_SPSR
;
366 reg_spsr_val
= ioread32(spsr
);
368 if (reg_spsr_val
& SPSR_ORF_BIT
) {
369 dev_err(&board_dat
->pdev
->dev
, "%s Over run error\n", __func__
);
370 if (data
->current_msg
->complete
!= 0) {
371 data
->transfer_complete
= true;
372 data
->current_msg
->status
= -EIO
;
373 data
->current_msg
->complete(data
->current_msg
->context
);
374 data
->bcurrent_msg_processing
= false;
375 data
->current_msg
= NULL
;
376 data
->cur_trans
= NULL
;
383 /* Check if the interrupt is for SPI device */
384 if (reg_spsr_val
& (SPSR_FI_BIT
| SPSR_RFI_BIT
)) {
385 pch_spi_handler_sub(data
, reg_spsr_val
, io_remap_addr
);
389 dev_dbg(&board_dat
->pdev
->dev
, "%s EXIT return value=%d\n",
396 * pch_spi_set_baud_rate() - Sets SPBR field in SPBRR
397 * @master: Pointer to struct spi_master.
398 * @speed_hz: Baud rate.
400 static void pch_spi_set_baud_rate(struct spi_master
*master
, u32 speed_hz
)
402 u32 n_spbr
= PCH_CLOCK_HZ
/ (speed_hz
* 2);
404 /* if baud rate is less than we can support limit it */
405 if (n_spbr
> PCH_MAX_SPBR
)
406 n_spbr
= PCH_MAX_SPBR
;
408 pch_spi_setclr_reg(master
, PCH_SPBRR
, n_spbr
, MASK_SPBRR_SPBR_BITS
);
412 * pch_spi_set_bits_per_word() - Sets SIZE field in SPBRR
413 * @master: Pointer to struct spi_master.
414 * @bits_per_word: Bits per word for SPI transfer.
416 static void pch_spi_set_bits_per_word(struct spi_master
*master
,
419 if (bits_per_word
== 8)
420 pch_spi_setclr_reg(master
, PCH_SPBRR
, 0, SPBRR_SIZE_BIT
);
422 pch_spi_setclr_reg(master
, PCH_SPBRR
, SPBRR_SIZE_BIT
, 0);
426 * pch_spi_setup_transfer() - Configures the PCH SPI hardware for transfer
427 * @spi: Pointer to struct spi_device.
429 static void pch_spi_setup_transfer(struct spi_device
*spi
)
433 dev_dbg(&spi
->dev
, "%s SPBRR content =%x setting baud rate=%d\n",
434 __func__
, pch_spi_readreg(spi
->master
, PCH_SPBRR
),
436 pch_spi_set_baud_rate(spi
->master
, spi
->max_speed_hz
);
438 /* set bits per word */
439 pch_spi_set_bits_per_word(spi
->master
, spi
->bits_per_word
);
441 if (!(spi
->mode
& SPI_LSB_FIRST
))
442 flags
|= SPCR_LSBF_BIT
;
443 if (spi
->mode
& SPI_CPOL
)
444 flags
|= SPCR_CPOL_BIT
;
445 if (spi
->mode
& SPI_CPHA
)
446 flags
|= SPCR_CPHA_BIT
;
447 pch_spi_setclr_reg(spi
->master
, PCH_SPCR
, flags
,
448 (SPCR_LSBF_BIT
| SPCR_CPOL_BIT
| SPCR_CPHA_BIT
));
450 /* Clear the FIFO by toggling FICLR to 1 and back to 0 */
451 pch_spi_clear_fifo(spi
->master
);
455 * pch_spi_reset() - Clears SPI registers
456 * @master: Pointer to struct spi_master.
458 static void pch_spi_reset(struct spi_master
*master
)
460 /* write 1 to reset SPI */
461 pch_spi_writereg(master
, PCH_SRST
, 0x1);
464 pch_spi_writereg(master
, PCH_SRST
, 0x0);
467 static int pch_spi_setup(struct spi_device
*pspi
)
469 /* check bits per word */
470 if (pspi
->bits_per_word
== 0) {
471 pspi
->bits_per_word
= 8;
472 dev_dbg(&pspi
->dev
, "%s 8 bits per word\n", __func__
);
475 if ((pspi
->bits_per_word
!= 8) && (pspi
->bits_per_word
!= 16)) {
476 dev_err(&pspi
->dev
, "%s Invalid bits per word\n", __func__
);
480 /* Check baud rate setting */
481 /* if baud rate of chip is greater than
482 max we can support,return error */
483 if ((pspi
->max_speed_hz
) > PCH_MAX_BAUDRATE
)
484 pspi
->max_speed_hz
= PCH_MAX_BAUDRATE
;
486 dev_dbg(&pspi
->dev
, "%s MODE = %x\n", __func__
,
487 (pspi
->mode
) & (SPI_CPOL
| SPI_CPHA
));
492 static int pch_spi_transfer(struct spi_device
*pspi
, struct spi_message
*pmsg
)
495 struct spi_transfer
*transfer
;
496 struct pch_spi_data
*data
= spi_master_get_devdata(pspi
->master
);
500 /* validate spi message and baud rate */
501 if (unlikely(list_empty(&pmsg
->transfers
) == 1)) {
502 dev_err(&pspi
->dev
, "%s list empty\n", __func__
);
507 if (unlikely(pspi
->max_speed_hz
== 0)) {
508 dev_err(&pspi
->dev
, "%s pch_spi_tranfer maxspeed=%d\n",
509 __func__
, pspi
->max_speed_hz
);
514 dev_dbg(&pspi
->dev
, "%s Transfer List not empty. "
515 "Transfer Speed is set.\n", __func__
);
517 spin_lock_irqsave(&data
->lock
, flags
);
518 /* validate Tx/Rx buffers and Transfer length */
519 list_for_each_entry(transfer
, &pmsg
->transfers
, transfer_list
) {
520 if (!transfer
->tx_buf
&& !transfer
->rx_buf
) {
522 "%s Tx and Rx buffer NULL\n", __func__
);
524 goto err_return_spinlock
;
527 if (!transfer
->len
) {
528 dev_err(&pspi
->dev
, "%s Transfer length invalid\n",
531 goto err_return_spinlock
;
534 dev_dbg(&pspi
->dev
, "%s Tx/Rx buffer valid. Transfer length"
535 " valid\n", __func__
);
537 /* if baud rate has been specified validate the same */
538 if (transfer
->speed_hz
> PCH_MAX_BAUDRATE
)
539 transfer
->speed_hz
= PCH_MAX_BAUDRATE
;
541 /* if bits per word has been specified validate the same */
542 if (transfer
->bits_per_word
) {
543 if ((transfer
->bits_per_word
!= 8)
544 && (transfer
->bits_per_word
!= 16)) {
547 "%s Invalid bits per word\n", __func__
);
548 goto err_return_spinlock
;
552 spin_unlock_irqrestore(&data
->lock
, flags
);
554 /* We won't process any messages if we have been asked to terminate */
555 if (data
->status
== STATUS_EXITING
) {
556 dev_err(&pspi
->dev
, "%s status = STATUS_EXITING.\n", __func__
);
561 /* If suspended ,return -EINVAL */
562 if (data
->board_dat
->suspend_sts
) {
563 dev_err(&pspi
->dev
, "%s suspend; returning EINVAL\n", __func__
);
568 /* set status of message */
569 pmsg
->actual_length
= 0;
570 dev_dbg(&pspi
->dev
, "%s - pmsg->status =%d\n", __func__
, pmsg
->status
);
572 pmsg
->status
= -EINPROGRESS
;
573 spin_lock_irqsave(&data
->lock
, flags
);
574 /* add message to queue */
575 list_add_tail(&pmsg
->queue
, &data
->queue
);
576 spin_unlock_irqrestore(&data
->lock
, flags
);
578 dev_dbg(&pspi
->dev
, "%s - Invoked list_add_tail\n", __func__
);
580 /* schedule work queue to run */
581 queue_work(data
->wk
, &data
->work
);
582 dev_dbg(&pspi
->dev
, "%s - Invoked queue work\n", __func__
);
587 dev_dbg(&pspi
->dev
, "%s RETURN=%d\n", __func__
, retval
);
590 dev_dbg(&pspi
->dev
, "%s RETURN=%d\n", __func__
, retval
);
591 spin_unlock_irqrestore(&data
->lock
, flags
);
595 static inline void pch_spi_select_chip(struct pch_spi_data
*data
,
596 struct spi_device
*pspi
)
598 if (data
->current_chip
!= NULL
) {
599 if (pspi
->chip_select
!= data
->n_curnt_chip
) {
600 dev_dbg(&pspi
->dev
, "%s : different slave\n", __func__
);
601 data
->current_chip
= NULL
;
605 data
->current_chip
= pspi
;
607 data
->n_curnt_chip
= data
->current_chip
->chip_select
;
609 dev_dbg(&pspi
->dev
, "%s :Invoking pch_spi_setup_transfer\n", __func__
);
610 pch_spi_setup_transfer(pspi
);
613 static void pch_spi_set_tx(struct pch_spi_data
*data
, int *bpw
)
618 struct spi_message
*pmsg
;
622 /* set baud rate if needed */
623 if (data
->cur_trans
->speed_hz
) {
624 dev_dbg(&data
->master
->dev
, "%s:setting baud rate\n", __func__
);
625 pch_spi_set_baud_rate(data
->master
, data
->cur_trans
->speed_hz
);
628 /* set bits per word if needed */
629 if (data
->cur_trans
->bits_per_word
&&
630 (data
->current_msg
->spi
->bits_per_word
!= data
->cur_trans
->bits_per_word
)) {
631 dev_dbg(&data
->master
->dev
, "%s:set bits per word\n", __func__
);
632 pch_spi_set_bits_per_word(data
->master
,
633 data
->cur_trans
->bits_per_word
);
634 *bpw
= data
->cur_trans
->bits_per_word
;
636 *bpw
= data
->current_msg
->spi
->bits_per_word
;
639 /* reset Tx/Rx index */
643 data
->bpw_len
= data
->cur_trans
->len
/ (*bpw
/ 8);
645 /* find alloc size */
646 size
= data
->cur_trans
->len
* sizeof(*data
->pkt_tx_buff
);
648 /* allocate memory for pkt_tx_buff & pkt_rx_buffer */
649 data
->pkt_tx_buff
= kzalloc(size
, GFP_KERNEL
);
650 if (data
->pkt_tx_buff
!= NULL
) {
651 data
->pkt_rx_buff
= kzalloc(size
, GFP_KERNEL
);
652 if (!data
->pkt_rx_buff
)
653 kfree(data
->pkt_tx_buff
);
656 if (!data
->pkt_rx_buff
) {
657 /* flush queue and set status of all transfers to -ENOMEM */
658 dev_err(&data
->master
->dev
, "%s :kzalloc failed\n", __func__
);
659 list_for_each_entry(pmsg
, data
->queue
.next
, queue
) {
660 pmsg
->status
= -ENOMEM
;
662 if (pmsg
->complete
!= 0)
663 pmsg
->complete(pmsg
->context
);
665 /* delete from queue */
666 list_del_init(&pmsg
->queue
);
672 if (data
->cur_trans
->tx_buf
!= NULL
) {
674 tx_buf
= data
->cur_trans
->tx_buf
;
675 for (j
= 0; j
< data
->bpw_len
; j
++)
676 data
->pkt_tx_buff
[j
] = *tx_buf
++;
678 tx_sbuf
= data
->cur_trans
->tx_buf
;
679 for (j
= 0; j
< data
->bpw_len
; j
++)
680 data
->pkt_tx_buff
[j
] = *tx_sbuf
++;
684 /* if len greater than PCH_MAX_FIFO_DEPTH, write 16,else len bytes */
685 n_writes
= data
->bpw_len
;
686 if (n_writes
> PCH_MAX_FIFO_DEPTH
)
687 n_writes
= PCH_MAX_FIFO_DEPTH
;
689 dev_dbg(&data
->master
->dev
, "\n%s:Pulling down SSN low - writing "
690 "0x2 to SSNXCR\n", __func__
);
691 pch_spi_writereg(data
->master
, PCH_SSNXCR
, SSN_LOW
);
693 for (j
= 0; j
< n_writes
; j
++)
694 pch_spi_writereg(data
->master
, PCH_SPDWR
, data
->pkt_tx_buff
[j
]);
696 /* update tx_index */
699 /* reset transfer complete flag */
700 data
->transfer_complete
= false;
701 data
->transfer_active
= true;
704 static void pch_spi_nomore_transfer(struct pch_spi_data
*data
)
706 struct spi_message
*pmsg
;
707 dev_dbg(&data
->master
->dev
, "%s called\n", __func__
);
708 /* Invoke complete callback
709 * [To the spi core..indicating end of transfer] */
710 data
->current_msg
->status
= 0;
712 if (data
->current_msg
->complete
!= 0) {
713 dev_dbg(&data
->master
->dev
,
714 "%s:Invoking callback of SPI core\n", __func__
);
715 data
->current_msg
->complete(data
->current_msg
->context
);
718 /* update status in global variable */
719 data
->bcurrent_msg_processing
= false;
721 dev_dbg(&data
->master
->dev
,
722 "%s:data->bcurrent_msg_processing = false\n", __func__
);
724 data
->current_msg
= NULL
;
725 data
->cur_trans
= NULL
;
727 /* check if we have items in list and not suspending
728 * return 1 if list empty */
729 if ((list_empty(&data
->queue
) == 0) &&
730 (!data
->board_dat
->suspend_sts
) &&
731 (data
->status
!= STATUS_EXITING
)) {
732 /* We have some more work to do (either there is more tranint
733 * bpw;sfer requests in the current message or there are
736 dev_dbg(&data
->master
->dev
, "%s:Invoke queue_work\n", __func__
);
737 queue_work(data
->wk
, &data
->work
);
738 } else if (data
->board_dat
->suspend_sts
||
739 data
->status
== STATUS_EXITING
) {
740 dev_dbg(&data
->master
->dev
,
741 "%s suspend/remove initiated, flushing queue\n",
743 list_for_each_entry(pmsg
, data
->queue
.next
, queue
) {
747 pmsg
->complete(pmsg
->context
);
749 /* delete from queue */
750 list_del_init(&pmsg
->queue
);
755 static void pch_spi_set_ir(struct pch_spi_data
*data
)
757 /* enable interrupts, set threshold, enable SPI */
758 if ((data
->bpw_len
) > PCH_MAX_FIFO_DEPTH
)
759 /* set receive threshold to PCH_RX_THOLD */
760 pch_spi_setclr_reg(data
->master
, PCH_SPCR
,
761 PCH_RX_THOLD
<< SPCR_RFIC_FIELD
|
762 SPCR_FIE_BIT
| SPCR_RFIE_BIT
|
763 SPCR_ORIE_BIT
| SPCR_SPE_BIT
,
764 MASK_RFIC_SPCR_BITS
| PCH_ALL
);
766 /* set receive threshold to maximum */
767 pch_spi_setclr_reg(data
->master
, PCH_SPCR
,
768 PCH_RX_THOLD_MAX
<< SPCR_RFIC_FIELD
|
769 SPCR_FIE_BIT
| SPCR_ORIE_BIT
|
771 MASK_RFIC_SPCR_BITS
| PCH_ALL
);
773 /* Wait until the transfer completes; go to sleep after
774 initiating the transfer. */
775 dev_dbg(&data
->master
->dev
,
776 "%s:waiting for transfer to get over\n", __func__
);
778 wait_event_interruptible(data
->wait
, data
->transfer_complete
);
780 /* clear all interrupts */
781 pch_spi_writereg(data
->master
, PCH_SPSR
,
782 pch_spi_readreg(data
->master
, PCH_SPSR
));
783 /* Disable interrupts and SPI transfer */
784 pch_spi_setclr_reg(data
->master
, PCH_SPCR
, 0, PCH_ALL
| SPCR_SPE_BIT
);
786 pch_spi_clear_fifo(data
->master
);
789 static void pch_spi_copy_rx_data(struct pch_spi_data
*data
, int bpw
)
796 if (!data
->cur_trans
->rx_buf
)
800 rx_buf
= data
->cur_trans
->rx_buf
;
801 for (j
= 0; j
< data
->bpw_len
; j
++)
802 *rx_buf
++ = data
->pkt_rx_buff
[j
] & 0xFF;
804 rx_sbuf
= data
->cur_trans
->rx_buf
;
805 for (j
= 0; j
< data
->bpw_len
; j
++)
806 *rx_sbuf
++ = data
->pkt_rx_buff
[j
];
810 static void pch_spi_copy_rx_data_for_dma(struct pch_spi_data
*data
, int bpw
)
815 const u8
*rx_dma_buf
;
816 const u16
*rx_dma_sbuf
;
819 if (!data
->cur_trans
->rx_buf
)
823 rx_buf
= data
->cur_trans
->rx_buf
;
824 rx_dma_buf
= data
->dma
.rx_buf_virt
;
825 for (j
= 0; j
< data
->bpw_len
; j
++)
826 *rx_buf
++ = *rx_dma_buf
++ & 0xFF;
827 data
->cur_trans
->rx_buf
= rx_buf
;
829 rx_sbuf
= data
->cur_trans
->rx_buf
;
830 rx_dma_sbuf
= data
->dma
.rx_buf_virt
;
831 for (j
= 0; j
< data
->bpw_len
; j
++)
832 *rx_sbuf
++ = *rx_dma_sbuf
++;
833 data
->cur_trans
->rx_buf
= rx_sbuf
;
837 static int pch_spi_start_transfer(struct pch_spi_data
*data
)
839 struct pch_spi_dma_ctrl
*dma
;
845 spin_lock_irqsave(&data
->lock
, flags
);
847 /* disable interrupts, SPI set enable */
848 pch_spi_setclr_reg(data
->master
, PCH_SPCR
, SPCR_SPE_BIT
, PCH_ALL
);
850 spin_unlock_irqrestore(&data
->lock
, flags
);
852 /* Wait until the transfer completes; go to sleep after
853 initiating the transfer. */
854 dev_dbg(&data
->master
->dev
,
855 "%s:waiting for transfer to get over\n", __func__
);
856 rtn
= wait_event_interruptible_timeout(data
->wait
,
857 data
->transfer_complete
,
858 msecs_to_jiffies(2 * HZ
));
860 dev_err(&data
->master
->dev
,
861 "%s wait-event timeout\n", __func__
);
863 dma_sync_sg_for_cpu(&data
->master
->dev
, dma
->sg_rx_p
, dma
->nent
,
866 dma_sync_sg_for_cpu(&data
->master
->dev
, dma
->sg_tx_p
, dma
->nent
,
868 memset(data
->dma
.tx_buf_virt
, 0, PAGE_SIZE
);
870 async_tx_ack(dma
->desc_rx
);
871 async_tx_ack(dma
->desc_tx
);
875 spin_lock_irqsave(&data
->lock
, flags
);
877 /* clear fifo threshold, disable interrupts, disable SPI transfer */
878 pch_spi_setclr_reg(data
->master
, PCH_SPCR
, 0,
879 MASK_RFIC_SPCR_BITS
| MASK_TFIC_SPCR_BITS
| PCH_ALL
|
881 /* clear all interrupts */
882 pch_spi_writereg(data
->master
, PCH_SPSR
,
883 pch_spi_readreg(data
->master
, PCH_SPSR
));
885 pch_spi_clear_fifo(data
->master
);
887 spin_unlock_irqrestore(&data
->lock
, flags
);
892 static void pch_dma_rx_complete(void *arg
)
894 struct pch_spi_data
*data
= arg
;
896 /* transfer is completed;inform pch_spi_process_messages_dma */
897 data
->transfer_complete
= true;
898 wake_up_interruptible(&data
->wait
);
901 static bool pch_spi_filter(struct dma_chan
*chan
, void *slave
)
903 struct pch_dma_slave
*param
= slave
;
905 if ((chan
->chan_id
== param
->chan_id
) &&
906 (param
->dma_dev
== chan
->device
->dev
)) {
907 chan
->private = param
;
914 static void pch_spi_request_dma(struct pch_spi_data
*data
, int bpw
)
917 struct dma_chan
*chan
;
918 struct pci_dev
*dma_dev
;
919 struct pch_dma_slave
*param
;
920 struct pch_spi_dma_ctrl
*dma
;
924 width
= PCH_DMA_WIDTH_1_BYTE
;
926 width
= PCH_DMA_WIDTH_2_BYTES
;
930 dma_cap_set(DMA_SLAVE
, mask
);
932 /* Get DMA's dev information */
933 dma_dev
= pci_get_bus_and_slot(data
->board_dat
->pdev
->bus
->number
,
937 param
= &dma
->param_tx
;
938 param
->dma_dev
= &dma_dev
->dev
;
939 param
->chan_id
= data
->master
->bus_num
* 2; /* Tx = 0, 2 */
940 param
->tx_reg
= data
->io_base_addr
+ PCH_SPDWR
;
941 param
->width
= width
;
942 chan
= dma_request_channel(mask
, pch_spi_filter
, param
);
944 dev_err(&data
->master
->dev
,
945 "ERROR: dma_request_channel FAILS(Tx)\n");
952 param
= &dma
->param_rx
;
953 param
->dma_dev
= &dma_dev
->dev
;
954 param
->chan_id
= data
->master
->bus_num
* 2 + 1; /* Rx = Tx + 1 */
955 param
->rx_reg
= data
->io_base_addr
+ PCH_SPDRR
;
956 param
->width
= width
;
957 chan
= dma_request_channel(mask
, pch_spi_filter
, param
);
959 dev_err(&data
->master
->dev
,
960 "ERROR: dma_request_channel FAILS(Rx)\n");
961 dma_release_channel(dma
->chan_tx
);
969 static void pch_spi_release_dma(struct pch_spi_data
*data
)
971 struct pch_spi_dma_ctrl
*dma
;
975 dma_release_channel(dma
->chan_tx
);
979 dma_release_channel(dma
->chan_rx
);
985 static void pch_spi_handle_dma(struct pch_spi_data
*data
, int *bpw
)
991 struct scatterlist
*sg
;
992 struct dma_async_tx_descriptor
*desc_tx
;
993 struct dma_async_tx_descriptor
*desc_rx
;
1000 struct pch_spi_dma_ctrl
*dma
;
1004 /* set baud rate if needed */
1005 if (data
->cur_trans
->speed_hz
) {
1006 dev_dbg(&data
->master
->dev
, "%s:setting baud rate\n", __func__
);
1007 spin_lock_irqsave(&data
->lock
, flags
);
1008 pch_spi_set_baud_rate(data
->master
, data
->cur_trans
->speed_hz
);
1009 spin_unlock_irqrestore(&data
->lock
, flags
);
1012 /* set bits per word if needed */
1013 if (data
->cur_trans
->bits_per_word
&&
1014 (data
->current_msg
->spi
->bits_per_word
!=
1015 data
->cur_trans
->bits_per_word
)) {
1016 dev_dbg(&data
->master
->dev
, "%s:set bits per word\n", __func__
);
1017 spin_lock_irqsave(&data
->lock
, flags
);
1018 pch_spi_set_bits_per_word(data
->master
,
1019 data
->cur_trans
->bits_per_word
);
1020 spin_unlock_irqrestore(&data
->lock
, flags
);
1021 *bpw
= data
->cur_trans
->bits_per_word
;
1023 *bpw
= data
->current_msg
->spi
->bits_per_word
;
1025 data
->bpw_len
= data
->cur_trans
->len
/ (*bpw
/ 8);
1027 if (data
->bpw_len
> PCH_BUF_SIZE
) {
1028 data
->bpw_len
= PCH_BUF_SIZE
;
1029 data
->cur_trans
->len
-= PCH_BUF_SIZE
;
1033 if (data
->cur_trans
->tx_buf
!= NULL
) {
1035 tx_buf
= data
->cur_trans
->tx_buf
;
1036 tx_dma_buf
= dma
->tx_buf_virt
;
1037 for (i
= 0; i
< data
->bpw_len
; i
++)
1038 *tx_dma_buf
++ = *tx_buf
++;
1040 tx_sbuf
= data
->cur_trans
->tx_buf
;
1041 tx_dma_sbuf
= dma
->tx_buf_virt
;
1042 for (i
= 0; i
< data
->bpw_len
; i
++)
1043 *tx_dma_sbuf
++ = *tx_sbuf
++;
1047 /* Calculate Rx parameter for DMA transmitting */
1048 if (data
->bpw_len
> PCH_DMA_TRANS_SIZE
) {
1049 if (data
->bpw_len
% PCH_DMA_TRANS_SIZE
) {
1050 num
= data
->bpw_len
/ PCH_DMA_TRANS_SIZE
+ 1;
1051 rem
= data
->bpw_len
% PCH_DMA_TRANS_SIZE
;
1053 num
= data
->bpw_len
/ PCH_DMA_TRANS_SIZE
;
1054 rem
= PCH_DMA_TRANS_SIZE
;
1056 size
= PCH_DMA_TRANS_SIZE
;
1059 size
= data
->bpw_len
;
1060 rem
= data
->bpw_len
;
1062 dev_dbg(&data
->master
->dev
, "%s num=%d size=%d rem=%d\n",
1063 __func__
, num
, size
, rem
);
1064 spin_lock_irqsave(&data
->lock
, flags
);
1066 /* set receive fifo threshold and transmit fifo threshold */
1067 pch_spi_setclr_reg(data
->master
, PCH_SPCR
,
1068 ((size
- 1) << SPCR_RFIC_FIELD
) |
1069 (PCH_TX_THOLD
<< SPCR_TFIC_FIELD
),
1070 MASK_RFIC_SPCR_BITS
| MASK_TFIC_SPCR_BITS
);
1072 spin_unlock_irqrestore(&data
->lock
, flags
);
1075 dma
->sg_rx_p
= kzalloc(sizeof(struct scatterlist
)*num
, GFP_ATOMIC
);
1076 sg_init_table(dma
->sg_rx_p
, num
); /* Initialize SG table */
1077 /* offset, length setting */
1079 for (i
= 0; i
< num
; i
++, sg
++) {
1080 if (i
== (num
- 2)) {
1081 sg
->offset
= size
* i
;
1082 sg
->offset
= sg
->offset
* (*bpw
/ 8);
1083 sg_set_page(sg
, virt_to_page(dma
->rx_buf_virt
), rem
,
1085 sg_dma_len(sg
) = rem
;
1086 } else if (i
== (num
- 1)) {
1087 sg
->offset
= size
* (i
- 1) + rem
;
1088 sg
->offset
= sg
->offset
* (*bpw
/ 8);
1089 sg_set_page(sg
, virt_to_page(dma
->rx_buf_virt
), size
,
1091 sg_dma_len(sg
) = size
;
1093 sg
->offset
= size
* i
;
1094 sg
->offset
= sg
->offset
* (*bpw
/ 8);
1095 sg_set_page(sg
, virt_to_page(dma
->rx_buf_virt
), size
,
1097 sg_dma_len(sg
) = size
;
1099 sg_dma_address(sg
) = dma
->rx_buf_dma
+ sg
->offset
;
1102 desc_rx
= dmaengine_prep_slave_sg(dma
->chan_rx
, sg
,
1103 num
, DMA_DEV_TO_MEM
,
1104 DMA_PREP_INTERRUPT
| DMA_CTRL_ACK
);
1106 dev_err(&data
->master
->dev
, "%s:device_prep_slave_sg Failed\n",
1110 dma_sync_sg_for_device(&data
->master
->dev
, sg
, num
, DMA_FROM_DEVICE
);
1111 desc_rx
->callback
= pch_dma_rx_complete
;
1112 desc_rx
->callback_param
= data
;
1114 dma
->desc_rx
= desc_rx
;
1116 /* Calculate Tx parameter for DMA transmitting */
1117 if (data
->bpw_len
> PCH_MAX_FIFO_DEPTH
) {
1118 head
= PCH_MAX_FIFO_DEPTH
- PCH_DMA_TRANS_SIZE
;
1119 if (data
->bpw_len
% PCH_DMA_TRANS_SIZE
> 4) {
1120 num
= data
->bpw_len
/ PCH_DMA_TRANS_SIZE
+ 1;
1121 rem
= data
->bpw_len
% PCH_DMA_TRANS_SIZE
- head
;
1123 num
= data
->bpw_len
/ PCH_DMA_TRANS_SIZE
;
1124 rem
= data
->bpw_len
% PCH_DMA_TRANS_SIZE
+
1125 PCH_DMA_TRANS_SIZE
- head
;
1127 size
= PCH_DMA_TRANS_SIZE
;
1130 size
= data
->bpw_len
;
1131 rem
= data
->bpw_len
;
1135 dma
->sg_tx_p
= kzalloc(sizeof(struct scatterlist
)*num
, GFP_ATOMIC
);
1136 sg_init_table(dma
->sg_tx_p
, num
); /* Initialize SG table */
1137 /* offset, length setting */
1139 for (i
= 0; i
< num
; i
++, sg
++) {
1142 sg_set_page(sg
, virt_to_page(dma
->tx_buf_virt
), size
+ head
,
1144 sg_dma_len(sg
) = size
+ head
;
1145 } else if (i
== (num
- 1)) {
1146 sg
->offset
= head
+ size
* i
;
1147 sg
->offset
= sg
->offset
* (*bpw
/ 8);
1148 sg_set_page(sg
, virt_to_page(dma
->tx_buf_virt
), rem
,
1150 sg_dma_len(sg
) = rem
;
1152 sg
->offset
= head
+ size
* i
;
1153 sg
->offset
= sg
->offset
* (*bpw
/ 8);
1154 sg_set_page(sg
, virt_to_page(dma
->tx_buf_virt
), size
,
1156 sg_dma_len(sg
) = size
;
1158 sg_dma_address(sg
) = dma
->tx_buf_dma
+ sg
->offset
;
1161 desc_tx
= dmaengine_prep_slave_sg(dma
->chan_tx
,
1162 sg
, num
, DMA_MEM_TO_DEV
,
1163 DMA_PREP_INTERRUPT
| DMA_CTRL_ACK
);
1165 dev_err(&data
->master
->dev
, "%s:device_prep_slave_sg Failed\n",
1169 dma_sync_sg_for_device(&data
->master
->dev
, sg
, num
, DMA_TO_DEVICE
);
1170 desc_tx
->callback
= NULL
;
1171 desc_tx
->callback_param
= data
;
1173 dma
->desc_tx
= desc_tx
;
1175 dev_dbg(&data
->master
->dev
, "\n%s:Pulling down SSN low - writing "
1176 "0x2 to SSNXCR\n", __func__
);
1178 spin_lock_irqsave(&data
->lock
, flags
);
1179 pch_spi_writereg(data
->master
, PCH_SSNXCR
, SSN_LOW
);
1180 desc_rx
->tx_submit(desc_rx
);
1181 desc_tx
->tx_submit(desc_tx
);
1182 spin_unlock_irqrestore(&data
->lock
, flags
);
1184 /* reset transfer complete flag */
1185 data
->transfer_complete
= false;
1188 static void pch_spi_process_messages(struct work_struct
*pwork
)
1190 struct spi_message
*pmsg
;
1191 struct pch_spi_data
*data
;
1194 data
= container_of(pwork
, struct pch_spi_data
, work
);
1195 dev_dbg(&data
->master
->dev
, "%s data initialized\n", __func__
);
1197 spin_lock(&data
->lock
);
1198 /* check if suspend has been initiated;if yes flush queue */
1199 if (data
->board_dat
->suspend_sts
|| (data
->status
== STATUS_EXITING
)) {
1200 dev_dbg(&data
->master
->dev
, "%s suspend/remove initiated,"
1201 "flushing queue\n", __func__
);
1202 list_for_each_entry(pmsg
, data
->queue
.next
, queue
) {
1203 pmsg
->status
= -EIO
;
1205 if (pmsg
->complete
!= 0) {
1206 spin_unlock(&data
->lock
);
1207 pmsg
->complete(pmsg
->context
);
1208 spin_lock(&data
->lock
);
1211 /* delete from queue */
1212 list_del_init(&pmsg
->queue
);
1215 spin_unlock(&data
->lock
);
1219 data
->bcurrent_msg_processing
= true;
1220 dev_dbg(&data
->master
->dev
,
1221 "%s Set data->bcurrent_msg_processing= true\n", __func__
);
1223 /* Get the message from the queue and delete it from there. */
1224 data
->current_msg
= list_entry(data
->queue
.next
, struct spi_message
,
1227 list_del_init(&data
->current_msg
->queue
);
1229 data
->current_msg
->status
= 0;
1231 pch_spi_select_chip(data
, data
->current_msg
->spi
);
1233 spin_unlock(&data
->lock
);
1236 pch_spi_request_dma(data
,
1237 data
->current_msg
->spi
->bits_per_word
);
1238 pch_spi_writereg(data
->master
, PCH_SSNXCR
, SSN_NO_CONTROL
);
1241 /* If we are already processing a message get the next
1242 transfer structure from the message otherwise retrieve
1243 the 1st transfer request from the message. */
1244 spin_lock(&data
->lock
);
1245 if (data
->cur_trans
== NULL
) {
1247 list_entry(data
->current_msg
->transfers
.next
,
1248 struct spi_transfer
, transfer_list
);
1249 dev_dbg(&data
->master
->dev
, "%s "
1250 ":Getting 1st transfer message\n", __func__
);
1253 list_entry(data
->cur_trans
->transfer_list
.next
,
1254 struct spi_transfer
, transfer_list
);
1255 dev_dbg(&data
->master
->dev
, "%s "
1256 ":Getting next transfer message\n", __func__
);
1258 spin_unlock(&data
->lock
);
1260 if (!data
->cur_trans
->len
)
1262 cnt
= (data
->cur_trans
->len
- 1) / PCH_BUF_SIZE
+ 1;
1263 data
->save_total_len
= data
->cur_trans
->len
;
1264 if (data
->use_dma
) {
1266 char *save_rx_buf
= data
->cur_trans
->rx_buf
;
1267 for (i
= 0; i
< cnt
; i
++) {
1268 pch_spi_handle_dma(data
, &bpw
);
1269 if (!pch_spi_start_transfer(data
)) {
1270 data
->transfer_complete
= true;
1271 data
->current_msg
->status
= -EIO
;
1272 data
->current_msg
->complete
1273 (data
->current_msg
->context
);
1274 data
->bcurrent_msg_processing
= false;
1275 data
->current_msg
= NULL
;
1276 data
->cur_trans
= NULL
;
1279 pch_spi_copy_rx_data_for_dma(data
, bpw
);
1281 data
->cur_trans
->rx_buf
= save_rx_buf
;
1283 pch_spi_set_tx(data
, &bpw
);
1284 pch_spi_set_ir(data
);
1285 pch_spi_copy_rx_data(data
, bpw
);
1286 kfree(data
->pkt_rx_buff
);
1287 data
->pkt_rx_buff
= NULL
;
1288 kfree(data
->pkt_tx_buff
);
1289 data
->pkt_tx_buff
= NULL
;
1291 /* increment message count */
1292 data
->cur_trans
->len
= data
->save_total_len
;
1293 data
->current_msg
->actual_length
+= data
->cur_trans
->len
;
1295 dev_dbg(&data
->master
->dev
,
1296 "%s:data->current_msg->actual_length=%d\n",
1297 __func__
, data
->current_msg
->actual_length
);
1299 /* check for delay */
1300 if (data
->cur_trans
->delay_usecs
) {
1301 dev_dbg(&data
->master
->dev
, "%s:"
1302 "delay in usec=%d\n", __func__
,
1303 data
->cur_trans
->delay_usecs
);
1304 udelay(data
->cur_trans
->delay_usecs
);
1307 spin_lock(&data
->lock
);
1309 /* No more transfer in this message. */
1310 if ((data
->cur_trans
->transfer_list
.next
) ==
1311 &(data
->current_msg
->transfers
)) {
1312 pch_spi_nomore_transfer(data
);
1315 spin_unlock(&data
->lock
);
1317 } while (data
->cur_trans
!= NULL
);
1320 pch_spi_writereg(data
->master
, PCH_SSNXCR
, SSN_HIGH
);
1322 pch_spi_release_dma(data
);
1325 static void pch_spi_free_resources(struct pch_spi_board_data
*board_dat
,
1326 struct pch_spi_data
*data
)
1328 dev_dbg(&board_dat
->pdev
->dev
, "%s ENTRY\n", __func__
);
1330 /* free workqueue */
1331 if (data
->wk
!= NULL
) {
1332 destroy_workqueue(data
->wk
);
1334 dev_dbg(&board_dat
->pdev
->dev
,
1335 "%s destroy_workqueue invoked successfully\n",
1340 static int pch_spi_get_resources(struct pch_spi_board_data
*board_dat
,
1341 struct pch_spi_data
*data
)
1345 dev_dbg(&board_dat
->pdev
->dev
, "%s ENTRY\n", __func__
);
1347 /* create workqueue */
1348 data
->wk
= create_singlethread_workqueue(KBUILD_MODNAME
);
1350 dev_err(&board_dat
->pdev
->dev
,
1351 "%s create_singlet hread_workqueue failed\n", __func__
);
1356 /* reset PCH SPI h/w */
1357 pch_spi_reset(data
->master
);
1358 dev_dbg(&board_dat
->pdev
->dev
,
1359 "%s pch_spi_reset invoked successfully\n", __func__
);
1361 dev_dbg(&board_dat
->pdev
->dev
, "%s data->irq_reg_sts=true\n", __func__
);
1365 dev_err(&board_dat
->pdev
->dev
,
1366 "%s FAIL:invoking pch_spi_free_resources\n", __func__
);
1367 pch_spi_free_resources(board_dat
, data
);
1370 dev_dbg(&board_dat
->pdev
->dev
, "%s Return=%d\n", __func__
, retval
);
1375 static void pch_free_dma_buf(struct pch_spi_board_data
*board_dat
,
1376 struct pch_spi_data
*data
)
1378 struct pch_spi_dma_ctrl
*dma
;
1381 if (dma
->tx_buf_dma
)
1382 dma_free_coherent(&board_dat
->pdev
->dev
, PCH_BUF_SIZE
,
1383 dma
->tx_buf_virt
, dma
->tx_buf_dma
);
1384 if (dma
->rx_buf_dma
)
1385 dma_free_coherent(&board_dat
->pdev
->dev
, PCH_BUF_SIZE
,
1386 dma
->rx_buf_virt
, dma
->rx_buf_dma
);
1390 static void pch_alloc_dma_buf(struct pch_spi_board_data
*board_dat
,
1391 struct pch_spi_data
*data
)
1393 struct pch_spi_dma_ctrl
*dma
;
1396 /* Get Consistent memory for Tx DMA */
1397 dma
->tx_buf_virt
= dma_alloc_coherent(&board_dat
->pdev
->dev
,
1398 PCH_BUF_SIZE
, &dma
->tx_buf_dma
, GFP_KERNEL
);
1399 /* Get Consistent memory for Rx DMA */
1400 dma
->rx_buf_virt
= dma_alloc_coherent(&board_dat
->pdev
->dev
,
1401 PCH_BUF_SIZE
, &dma
->rx_buf_dma
, GFP_KERNEL
);
1404 static int __devinit
pch_spi_pd_probe(struct platform_device
*plat_dev
)
1407 struct spi_master
*master
;
1408 struct pch_spi_board_data
*board_dat
= dev_get_platdata(&plat_dev
->dev
);
1409 struct pch_spi_data
*data
;
1411 dev_dbg(&plat_dev
->dev
, "%s:debug\n", __func__
);
1413 master
= spi_alloc_master(&board_dat
->pdev
->dev
,
1414 sizeof(struct pch_spi_data
));
1416 dev_err(&plat_dev
->dev
, "spi_alloc_master[%d] failed.\n",
1421 data
= spi_master_get_devdata(master
);
1422 data
->master
= master
;
1424 platform_set_drvdata(plat_dev
, data
);
1426 /* baseaddress + address offset) */
1427 data
->io_base_addr
= pci_resource_start(board_dat
->pdev
, 1) +
1428 PCH_ADDRESS_SIZE
* plat_dev
->id
;
1429 data
->io_remap_addr
= pci_iomap(board_dat
->pdev
, 1, 0) +
1430 PCH_ADDRESS_SIZE
* plat_dev
->id
;
1431 if (!data
->io_remap_addr
) {
1432 dev_err(&plat_dev
->dev
, "%s pci_iomap failed\n", __func__
);
1437 dev_dbg(&plat_dev
->dev
, "[ch%d] remap_addr=%p\n",
1438 plat_dev
->id
, data
->io_remap_addr
);
1440 /* initialize members of SPI master */
1441 master
->bus_num
= -1;
1442 master
->num_chipselect
= PCH_MAX_CS
;
1443 master
->setup
= pch_spi_setup
;
1444 master
->transfer
= pch_spi_transfer
;
1445 master
->mode_bits
= SPI_CPOL
| SPI_CPHA
| SPI_LSB_FIRST
;
1447 data
->board_dat
= board_dat
;
1448 data
->plat_dev
= plat_dev
;
1449 data
->n_curnt_chip
= 255;
1450 data
->status
= STATUS_RUNNING
;
1451 data
->ch
= plat_dev
->id
;
1452 data
->use_dma
= use_dma
;
1454 INIT_LIST_HEAD(&data
->queue
);
1455 spin_lock_init(&data
->lock
);
1456 INIT_WORK(&data
->work
, pch_spi_process_messages
);
1457 init_waitqueue_head(&data
->wait
);
1459 ret
= pch_spi_get_resources(board_dat
, data
);
1461 dev_err(&plat_dev
->dev
, "%s fail(retval=%d)\n", __func__
, ret
);
1462 goto err_spi_get_resources
;
1465 ret
= request_irq(board_dat
->pdev
->irq
, pch_spi_handler
,
1466 IRQF_SHARED
, KBUILD_MODNAME
, data
);
1468 dev_err(&plat_dev
->dev
,
1469 "%s request_irq failed\n", __func__
);
1470 goto err_request_irq
;
1472 data
->irq_reg_sts
= true;
1474 pch_spi_set_master_mode(master
);
1476 ret
= spi_register_master(master
);
1478 dev_err(&plat_dev
->dev
,
1479 "%s spi_register_master FAILED\n", __func__
);
1480 goto err_spi_register_master
;
1484 dev_info(&plat_dev
->dev
, "Use DMA for data transfers\n");
1485 pch_alloc_dma_buf(board_dat
, data
);
1490 err_spi_register_master
:
1491 free_irq(board_dat
->pdev
->irq
, board_dat
);
1493 pch_spi_free_resources(board_dat
, data
);
1494 err_spi_get_resources
:
1495 pci_iounmap(board_dat
->pdev
, data
->io_remap_addr
);
1497 spi_master_put(master
);
1502 static int __devexit
pch_spi_pd_remove(struct platform_device
*plat_dev
)
1504 struct pch_spi_board_data
*board_dat
= dev_get_platdata(&plat_dev
->dev
);
1505 struct pch_spi_data
*data
= platform_get_drvdata(plat_dev
);
1507 unsigned long flags
;
1509 dev_dbg(&plat_dev
->dev
, "%s:[ch%d] irq=%d\n",
1510 __func__
, plat_dev
->id
, board_dat
->pdev
->irq
);
1513 pch_free_dma_buf(board_dat
, data
);
1515 /* check for any pending messages; no action is taken if the queue
1516 * is still full; but at least we tried. Unload anyway */
1518 spin_lock_irqsave(&data
->lock
, flags
);
1519 data
->status
= STATUS_EXITING
;
1520 while ((list_empty(&data
->queue
) == 0) && --count
) {
1521 dev_dbg(&board_dat
->pdev
->dev
, "%s :queue not empty\n",
1523 spin_unlock_irqrestore(&data
->lock
, flags
);
1524 msleep(PCH_SLEEP_TIME
);
1525 spin_lock_irqsave(&data
->lock
, flags
);
1527 spin_unlock_irqrestore(&data
->lock
, flags
);
1529 pch_spi_free_resources(board_dat
, data
);
1530 /* disable interrupts & free IRQ */
1531 if (data
->irq_reg_sts
) {
1532 /* disable interrupts */
1533 pch_spi_setclr_reg(data
->master
, PCH_SPCR
, 0, PCH_ALL
);
1534 data
->irq_reg_sts
= false;
1535 free_irq(board_dat
->pdev
->irq
, data
);
1538 pci_iounmap(board_dat
->pdev
, data
->io_remap_addr
);
1539 spi_unregister_master(data
->master
);
1540 spi_master_put(data
->master
);
1541 platform_set_drvdata(plat_dev
, NULL
);
1546 static int pch_spi_pd_suspend(struct platform_device
*pd_dev
,
1550 struct pch_spi_board_data
*board_dat
= dev_get_platdata(&pd_dev
->dev
);
1551 struct pch_spi_data
*data
= platform_get_drvdata(pd_dev
);
1553 dev_dbg(&pd_dev
->dev
, "%s ENTRY\n", __func__
);
1556 dev_err(&pd_dev
->dev
,
1557 "%s pci_get_drvdata returned NULL\n", __func__
);
1561 /* check if the current message is processed:
1562 Only after thats done the transfer will be suspended */
1564 while ((--count
) > 0) {
1565 if (!(data
->bcurrent_msg_processing
))
1567 msleep(PCH_SLEEP_TIME
);
1571 if (data
->irq_reg_sts
) {
1572 /* disable all interrupts */
1573 pch_spi_setclr_reg(data
->master
, PCH_SPCR
, 0, PCH_ALL
);
1574 pch_spi_reset(data
->master
);
1575 free_irq(board_dat
->pdev
->irq
, data
);
1577 data
->irq_reg_sts
= false;
1578 dev_dbg(&pd_dev
->dev
,
1579 "%s free_irq invoked successfully.\n", __func__
);
1585 static int pch_spi_pd_resume(struct platform_device
*pd_dev
)
1587 struct pch_spi_board_data
*board_dat
= dev_get_platdata(&pd_dev
->dev
);
1588 struct pch_spi_data
*data
= platform_get_drvdata(pd_dev
);
1592 dev_err(&pd_dev
->dev
,
1593 "%s pci_get_drvdata returned NULL\n", __func__
);
1597 if (!data
->irq_reg_sts
) {
1599 retval
= request_irq(board_dat
->pdev
->irq
, pch_spi_handler
,
1600 IRQF_SHARED
, KBUILD_MODNAME
, data
);
1602 dev_err(&pd_dev
->dev
,
1603 "%s request_irq failed\n", __func__
);
1607 /* reset PCH SPI h/w */
1608 pch_spi_reset(data
->master
);
1609 pch_spi_set_master_mode(data
->master
);
1610 data
->irq_reg_sts
= true;
1615 #define pch_spi_pd_suspend NULL
1616 #define pch_spi_pd_resume NULL
1619 static struct platform_driver pch_spi_pd_driver
= {
1622 .owner
= THIS_MODULE
,
1624 .probe
= pch_spi_pd_probe
,
1625 .remove
= __devexit_p(pch_spi_pd_remove
),
1626 .suspend
= pch_spi_pd_suspend
,
1627 .resume
= pch_spi_pd_resume
1630 static int __devinit
pch_spi_probe(struct pci_dev
*pdev
,
1631 const struct pci_device_id
*id
)
1633 struct pch_spi_board_data
*board_dat
;
1634 struct platform_device
*pd_dev
= NULL
;
1637 struct pch_pd_dev_save
*pd_dev_save
;
1639 pd_dev_save
= kzalloc(sizeof(struct pch_pd_dev_save
), GFP_KERNEL
);
1641 dev_err(&pdev
->dev
, "%s Can't allocate pd_dev_sav\n", __func__
);
1645 board_dat
= kzalloc(sizeof(struct pch_spi_board_data
), GFP_KERNEL
);
1647 dev_err(&pdev
->dev
, "%s Can't allocate board_dat\n", __func__
);
1652 retval
= pci_request_regions(pdev
, KBUILD_MODNAME
);
1654 dev_err(&pdev
->dev
, "%s request_region failed\n", __func__
);
1655 goto pci_request_regions
;
1658 board_dat
->pdev
= pdev
;
1659 board_dat
->num
= id
->driver_data
;
1660 pd_dev_save
->num
= id
->driver_data
;
1661 pd_dev_save
->board_dat
= board_dat
;
1663 retval
= pci_enable_device(pdev
);
1665 dev_err(&pdev
->dev
, "%s pci_enable_device failed\n", __func__
);
1666 goto pci_enable_device
;
1669 for (i
= 0; i
< board_dat
->num
; i
++) {
1670 pd_dev
= platform_device_alloc("pch-spi", i
);
1672 dev_err(&pdev
->dev
, "platform_device_alloc failed\n");
1673 goto err_platform_device
;
1675 pd_dev_save
->pd_save
[i
] = pd_dev
;
1676 pd_dev
->dev
.parent
= &pdev
->dev
;
1678 retval
= platform_device_add_data(pd_dev
, board_dat
,
1679 sizeof(*board_dat
));
1682 "platform_device_add_data failed\n");
1683 platform_device_put(pd_dev
);
1684 goto err_platform_device
;
1687 retval
= platform_device_add(pd_dev
);
1689 dev_err(&pdev
->dev
, "platform_device_add failed\n");
1690 platform_device_put(pd_dev
);
1691 goto err_platform_device
;
1695 pci_set_drvdata(pdev
, pd_dev_save
);
1699 err_platform_device
:
1700 pci_disable_device(pdev
);
1702 pci_release_regions(pdev
);
1703 pci_request_regions
:
1711 static void __devexit
pch_spi_remove(struct pci_dev
*pdev
)
1714 struct pch_pd_dev_save
*pd_dev_save
= pci_get_drvdata(pdev
);
1716 dev_dbg(&pdev
->dev
, "%s ENTRY:pdev=%p\n", __func__
, pdev
);
1718 for (i
= 0; i
< pd_dev_save
->num
; i
++)
1719 platform_device_unregister(pd_dev_save
->pd_save
[i
]);
1721 pci_disable_device(pdev
);
1722 pci_release_regions(pdev
);
1723 kfree(pd_dev_save
->board_dat
);
1728 static int pch_spi_suspend(struct pci_dev
*pdev
, pm_message_t state
)
1731 struct pch_pd_dev_save
*pd_dev_save
= pci_get_drvdata(pdev
);
1733 dev_dbg(&pdev
->dev
, "%s ENTRY\n", __func__
);
1735 pd_dev_save
->board_dat
->suspend_sts
= true;
1737 /* save config space */
1738 retval
= pci_save_state(pdev
);
1740 pci_enable_wake(pdev
, PCI_D3hot
, 0);
1741 pci_disable_device(pdev
);
1742 pci_set_power_state(pdev
, PCI_D3hot
);
1744 dev_err(&pdev
->dev
, "%s pci_save_state failed\n", __func__
);
1750 static int pch_spi_resume(struct pci_dev
*pdev
)
1753 struct pch_pd_dev_save
*pd_dev_save
= pci_get_drvdata(pdev
);
1754 dev_dbg(&pdev
->dev
, "%s ENTRY\n", __func__
);
1756 pci_set_power_state(pdev
, PCI_D0
);
1757 pci_restore_state(pdev
);
1759 retval
= pci_enable_device(pdev
);
1762 "%s pci_enable_device failed\n", __func__
);
1764 pci_enable_wake(pdev
, PCI_D3hot
, 0);
1766 /* set suspend status to false */
1767 pd_dev_save
->board_dat
->suspend_sts
= false;
1773 #define pch_spi_suspend NULL
1774 #define pch_spi_resume NULL
1778 static struct pci_driver pch_spi_pcidev_driver
= {
1780 .id_table
= pch_spi_pcidev_id
,
1781 .probe
= pch_spi_probe
,
1782 .remove
= pch_spi_remove
,
1783 .suspend
= pch_spi_suspend
,
1784 .resume
= pch_spi_resume
,
1787 static int __init
pch_spi_init(void)
1790 ret
= platform_driver_register(&pch_spi_pd_driver
);
1794 ret
= pci_register_driver(&pch_spi_pcidev_driver
);
1800 module_init(pch_spi_init
);
1802 static void __exit
pch_spi_exit(void)
1804 pci_unregister_driver(&pch_spi_pcidev_driver
);
1805 platform_driver_unregister(&pch_spi_pd_driver
);
1807 module_exit(pch_spi_exit
);
1809 module_param(use_dma
, int, 0644);
1810 MODULE_PARM_DESC(use_dma
,
1811 "to use DMA for data transfers pass 1 else 0; default 1");
1813 MODULE_LICENSE("GPL");
1814 MODULE_DESCRIPTION("Intel EG20T PCH/LAPIS Semiconductor ML7xxx IOH SPI Driver");