?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Linux 3.4.102
[linux/fpc-iii.git] / drivers / tty / serial / pmac_zilog.c
blob3f93c47d50bbf84e05107c4925b97ed9df9dd05b
1 /*
2 * Driver for PowerMac Z85c30 based ESCC cell found in the
3 * "macio" ASICs of various PowerMac models
4 *
5 * Copyright (C) 2003 Ben. Herrenschmidt (benh@kernel.crashing.org)
6 *
7 * Derived from drivers/macintosh/macserial.c by Paul Mackerras
8 * and drivers/serial/sunzilog.c by David S. Miller
9 *
10 * Hrm... actually, I ripped most of sunzilog (Thanks David !) and
11 * adapted special tweaks needed for us. I don't think it's worth
12 * merging back those though. The DMA code still has to get in
13 * and once done, I expect that driver to remain fairly stable in
14 * the long term, unless we change the driver model again...
15 *
16 * This program is free software; you can redistribute it and/or modify
17 * it under the terms of the GNU General Public License as published by
18 * the Free Software Foundation; either version 2 of the License, or
19 * (at your option) any later version.
20 *
21 * This program is distributed in the hope that it will be useful,
22 * but WITHOUT ANY WARRANTY; without even the implied warranty of
23 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
24 * GNU General Public License for more details.
25 *
26 * You should have received a copy of the GNU General Public License
27 * along with this program; if not, write to the Free Software
28 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
29 *
30 * 2004-08-06 Harald Welte <laforge@gnumonks.org>
31 * - Enable BREAK interrupt
32 * - Add support for sysreq
33 *
34 * TODO: - Add DMA support
35 * - Defer port shutdown to a few seconds after close
36 * - maybe put something right into uap->clk_divisor
37 */
38
39 #undef DEBUG
40 #undef DEBUG_HARD
41 #undef USE_CTRL_O_SYSRQ
42
43 #include <linux/module.h>
44 #include <linux/tty.h>
45
46 #include <linux/tty_flip.h>
47 #include <linux/major.h>
48 #include <linux/string.h>
49 #include <linux/fcntl.h>
50 #include <linux/mm.h>
51 #include <linux/kernel.h>
52 #include <linux/delay.h>
53 #include <linux/init.h>
54 #include <linux/console.h>
55 #include <linux/adb.h>
56 #include <linux/pmu.h>
57 #include <linux/bitops.h>
58 #include <linux/sysrq.h>
59 #include <linux/mutex.h>
60 #include <asm/sections.h>
61 #include <asm/io.h>
62 #include <asm/irq.h>
63
64 #ifdef CONFIG_PPC_PMAC
65 #include <asm/prom.h>
66 #include <asm/machdep.h>
67 #include <asm/pmac_feature.h>
68 #include <asm/dbdma.h>
69 #include <asm/macio.h>
70 #else
71 #include <linux/platform_device.h>
72 #define of_machine_is_compatible(x) (0)
73 #endif
74
75 #if defined (CONFIG_SERIAL_PMACZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
76 #define SUPPORT_SYSRQ
77 #endif
78
79 #include <linux/serial.h>
80 #include <linux/serial_core.h>
81
82 #include "pmac_zilog.h"
83
84 /* Not yet implemented */
85 #undef HAS_DBDMA
86
87 static char version[] __initdata = "pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)";
88 MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
89 MODULE_DESCRIPTION("Driver for the Mac and PowerMac serial ports.");
90 MODULE_LICENSE("GPL");
91
92 #ifdef CONFIG_SERIAL_PMACZILOG_TTYS
93 #define PMACZILOG_MAJOR TTY_MAJOR
94 #define PMACZILOG_MINOR 64
95 #define PMACZILOG_NAME "ttyS"
96 #else
97 #define PMACZILOG_MAJOR 204
98 #define PMACZILOG_MINOR 192
99 #define PMACZILOG_NAME "ttyPZ"
100 #endif
101
102 #define pmz_debug(fmt, arg...) pr_debug("ttyPZ%d: " fmt, uap->port.line, ## arg)
103 #define pmz_error(fmt, arg...) pr_err("ttyPZ%d: " fmt, uap->port.line, ## arg)
104 #define pmz_info(fmt, arg...) pr_info("ttyPZ%d: " fmt, uap->port.line, ## arg)
105
106 /*
107 * For the sake of early serial console, we can do a pre-probe
108 * (optional) of the ports at rather early boot time.
109 */
110 static struct uart_pmac_port pmz_ports[MAX_ZS_PORTS];
111 static int pmz_ports_count;
112
113 static struct uart_driver pmz_uart_reg = {
114 .owner = THIS_MODULE,
115 .driver_name = PMACZILOG_NAME,
116 .dev_name = PMACZILOG_NAME,
117 .major = PMACZILOG_MAJOR,
118 .minor = PMACZILOG_MINOR,
119 };
120
121
122 /*
123 * Load all registers to reprogram the port
124 * This function must only be called when the TX is not busy. The UART
125 * port lock must be held and local interrupts disabled.
126 */
127 static void pmz_load_zsregs(struct uart_pmac_port *uap, u8 *regs)
128 {
129 int i;
130
131 /* Let pending transmits finish. */
132 for (i = 0; i < 1000; i++) {
133 unsigned char stat = read_zsreg(uap, R1);
134 if (stat & ALL_SNT)
135 break;
136 udelay(100);
137 }
138
139 ZS_CLEARERR(uap);
140 zssync(uap);
141 ZS_CLEARFIFO(uap);
142 zssync(uap);
143 ZS_CLEARERR(uap);
144
145 /* Disable all interrupts. */
146 write_zsreg(uap, R1,
147 regs[R1] & ~(RxINT_MASK | TxINT_ENAB | EXT_INT_ENAB));
148
149 /* Set parity, sync config, stop bits, and clock divisor. */
150 write_zsreg(uap, R4, regs[R4]);
151
152 /* Set misc. TX/RX control bits. */
153 write_zsreg(uap, R10, regs[R10]);
154
155 /* Set TX/RX controls sans the enable bits. */
156 write_zsreg(uap, R3, regs[R3] & ~RxENABLE);
157 write_zsreg(uap, R5, regs[R5] & ~TxENABLE);
158
159 /* now set R7 "prime" on ESCC */
160 write_zsreg(uap, R15, regs[R15] | EN85C30);
161 write_zsreg(uap, R7, regs[R7P]);
162
163 /* make sure we use R7 "non-prime" on ESCC */
164 write_zsreg(uap, R15, regs[R15] & ~EN85C30);
165
166 /* Synchronous mode config. */
167 write_zsreg(uap, R6, regs[R6]);
168 write_zsreg(uap, R7, regs[R7]);
169
170 /* Disable baud generator. */
171 write_zsreg(uap, R14, regs[R14] & ~BRENAB);
172
173 /* Clock mode control. */
174 write_zsreg(uap, R11, regs[R11]);
175
176 /* Lower and upper byte of baud rate generator divisor. */
177 write_zsreg(uap, R12, regs[R12]);
178 write_zsreg(uap, R13, regs[R13]);
179
180 /* Now rewrite R14, with BRENAB (if set). */
181 write_zsreg(uap, R14, regs[R14]);
182
183 /* Reset external status interrupts. */
184 write_zsreg(uap, R0, RES_EXT_INT);
185 write_zsreg(uap, R0, RES_EXT_INT);
186
187 /* Rewrite R3/R5, this time without enables masked. */
188 write_zsreg(uap, R3, regs[R3]);
189 write_zsreg(uap, R5, regs[R5]);
190
191 /* Rewrite R1, this time without IRQ enabled masked. */
192 write_zsreg(uap, R1, regs[R1]);
193
194 /* Enable interrupts */
195 write_zsreg(uap, R9, regs[R9]);
196 }
197
198 /*
199 * We do like sunzilog to avoid disrupting pending Tx
200 * Reprogram the Zilog channel HW registers with the copies found in the
201 * software state struct. If the transmitter is busy, we defer this update
202 * until the next TX complete interrupt. Else, we do it right now.
203 *
204 * The UART port lock must be held and local interrupts disabled.
205 */
206 static void pmz_maybe_update_regs(struct uart_pmac_port *uap)
207 {
208 if (!ZS_REGS_HELD(uap)) {
209 if (ZS_TX_ACTIVE(uap)) {
210 uap->flags |= PMACZILOG_FLAG_REGS_HELD;
211 } else {
212 pmz_debug("pmz: maybe_update_regs: updating\n");
213 pmz_load_zsregs(uap, uap->curregs);
214 }
215 }
216 }
217
218 static void pmz_interrupt_control(struct uart_pmac_port *uap, int enable)
219 {
220 if (enable) {
221 uap->curregs[1] |= INT_ALL_Rx | TxINT_ENAB;
222 if (!ZS_IS_EXTCLK(uap))
223 uap->curregs[1] |= EXT_INT_ENAB;
224 } else {
225 uap->curregs[1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK);
226 }
227 write_zsreg(uap, R1, uap->curregs[1]);
228 }
229
230 static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap)
231 {
232 struct tty_struct *tty = NULL;
233 unsigned char ch, r1, drop, error, flag;
234 int loops = 0;
235
236 /* Sanity check, make sure the old bug is no longer happening */
237 if (uap->port.state == NULL || uap->port.state->port.tty == NULL) {
238 WARN_ON(1);
239 (void)read_zsdata(uap);
240 return NULL;
241 }
242 tty = uap->port.state->port.tty;
243
244 while (1) {
245 error = 0;
246 drop = 0;
247
248 r1 = read_zsreg(uap, R1);
249 ch = read_zsdata(uap);
250
251 if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) {
252 write_zsreg(uap, R0, ERR_RES);
253 zssync(uap);
254 }
255
256 ch &= uap->parity_mask;
257 if (ch == 0 && uap->flags & PMACZILOG_FLAG_BREAK) {
258 uap->flags &= ~PMACZILOG_FLAG_BREAK;
259 }
260
261 #if defined(CONFIG_MAGIC_SYSRQ) && defined(CONFIG_SERIAL_CORE_CONSOLE)
262 #ifdef USE_CTRL_O_SYSRQ
263 /* Handle the SysRq ^O Hack */
264 if (ch == '\x0f') {
265 uap->port.sysrq = jiffies + HZ*5;
266 goto next_char;
267 }
268 #endif /* USE_CTRL_O_SYSRQ */
269 if (uap->port.sysrq) {
270 int swallow;
271 spin_unlock(&uap->port.lock);
272 swallow = uart_handle_sysrq_char(&uap->port, ch);
273 spin_lock(&uap->port.lock);
274 if (swallow)
275 goto next_char;
276 }
277 #endif /* CONFIG_MAGIC_SYSRQ && CONFIG_SERIAL_CORE_CONSOLE */
278
279 /* A real serial line, record the character and status. */
280 if (drop)
281 goto next_char;
282
283 flag = TTY_NORMAL;
284 uap->port.icount.rx++;
285
286 if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR | BRK_ABRT)) {
287 error = 1;
288 if (r1 & BRK_ABRT) {
289 pmz_debug("pmz: got break !\n");
290 r1 &= ~(PAR_ERR | CRC_ERR);
291 uap->port.icount.brk++;
292 if (uart_handle_break(&uap->port))
293 goto next_char;
294 }
295 else if (r1 & PAR_ERR)
296 uap->port.icount.parity++;
297 else if (r1 & CRC_ERR)
298 uap->port.icount.frame++;
299 if (r1 & Rx_OVR)
300 uap->port.icount.overrun++;
301 r1 &= uap->port.read_status_mask;
302 if (r1 & BRK_ABRT)
303 flag = TTY_BREAK;
304 else if (r1 & PAR_ERR)
305 flag = TTY_PARITY;
306 else if (r1 & CRC_ERR)
307 flag = TTY_FRAME;
308 }
309
310 if (uap->port.ignore_status_mask == 0xff ||
311 (r1 & uap->port.ignore_status_mask) == 0) {
312 tty_insert_flip_char(tty, ch, flag);
313 }
314 if (r1 & Rx_OVR)
315 tty_insert_flip_char(tty, 0, TTY_OVERRUN);
316 next_char:
317 /* We can get stuck in an infinite loop getting char 0 when the
318 * line is in a wrong HW state, we break that here.
319 * When that happens, I disable the receive side of the driver.
320 * Note that what I've been experiencing is a real irq loop where
321 * I'm getting flooded regardless of the actual port speed.
322 * Something strange is going on with the HW
323 */
324 if ((++loops) > 1000)
325 goto flood;
326 ch = read_zsreg(uap, R0);
327 if (!(ch & Rx_CH_AV))
328 break;
329 }
330
331 return tty;
332 flood:
333 pmz_interrupt_control(uap, 0);
334 pmz_error("pmz: rx irq flood !\n");
335 return tty;
336 }
337
338 static void pmz_status_handle(struct uart_pmac_port *uap)
339 {
340 unsigned char status;
341
342 status = read_zsreg(uap, R0);
343 write_zsreg(uap, R0, RES_EXT_INT);
344 zssync(uap);
345
346 if (ZS_IS_OPEN(uap) && ZS_WANTS_MODEM_STATUS(uap)) {
347 if (status & SYNC_HUNT)
348 uap->port.icount.dsr++;
349
350 /* The Zilog just gives us an interrupt when DCD/CTS/etc. change.
351 * But it does not tell us which bit has changed, we have to keep
352 * track of this ourselves.
353 * The CTS input is inverted for some reason. -- paulus
354 */
355 if ((status ^ uap->prev_status) & DCD)
356 uart_handle_dcd_change(&uap->port,
357 (status & DCD));
358 if ((status ^ uap->prev_status) & CTS)
359 uart_handle_cts_change(&uap->port,
360 !(status & CTS));
361
362 wake_up_interruptible(&uap->port.state->port.delta_msr_wait);
363 }
364
365 if (status & BRK_ABRT)
366 uap->flags |= PMACZILOG_FLAG_BREAK;
367
368 uap->prev_status = status;
369 }
370
371 static void pmz_transmit_chars(struct uart_pmac_port *uap)
372 {
373 struct circ_buf *xmit;
374
375 if (ZS_IS_CONS(uap)) {
376 unsigned char status = read_zsreg(uap, R0);
377
378 /* TX still busy? Just wait for the next TX done interrupt.
379 *
380 * It can occur because of how we do serial console writes. It would
381 * be nice to transmit console writes just like we normally would for
382 * a TTY line. (ie. buffered and TX interrupt driven). That is not
383 * easy because console writes cannot sleep. One solution might be
384 * to poll on enough port->xmit space becoming free. -DaveM
385 */
386 if (!(status & Tx_BUF_EMP))
387 return;
388 }
389
390 uap->flags &= ~PMACZILOG_FLAG_TX_ACTIVE;
391
392 if (ZS_REGS_HELD(uap)) {
393 pmz_load_zsregs(uap, uap->curregs);
394 uap->flags &= ~PMACZILOG_FLAG_REGS_HELD;
395 }
396
397 if (ZS_TX_STOPPED(uap)) {
398 uap->flags &= ~PMACZILOG_FLAG_TX_STOPPED;
399 goto ack_tx_int;
400 }
401
402 /* Under some circumstances, we see interrupts reported for
403 * a closed channel. The interrupt mask in R1 is clear, but
404 * R3 still signals the interrupts and we see them when taking
405 * an interrupt for the other channel (this could be a qemu
406 * bug but since the ESCC doc doesn't specify precsiely whether
407 * R3 interrup status bits are masked by R1 interrupt enable
408 * bits, better safe than sorry). --BenH.
409 */
410 if (!ZS_IS_OPEN(uap))
411 goto ack_tx_int;
412
413 if (uap->port.x_char) {
414 uap->flags |= PMACZILOG_FLAG_TX_ACTIVE;
415 write_zsdata(uap, uap->port.x_char);
416 zssync(uap);
417 uap->port.icount.tx++;
418 uap->port.x_char = 0;
419 return;
420 }
421
422 if (uap->port.state == NULL)
423 goto ack_tx_int;
424 xmit = &uap->port.state->xmit;
425 if (uart_circ_empty(xmit)) {
426 uart_write_wakeup(&uap->port);
427 goto ack_tx_int;
428 }
429 if (uart_tx_stopped(&uap->port))
430 goto ack_tx_int;
431
432 uap->flags |= PMACZILOG_FLAG_TX_ACTIVE;
433 write_zsdata(uap, xmit->buf[xmit->tail]);
434 zssync(uap);
435
436 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
437 uap->port.icount.tx++;
438
439 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
440 uart_write_wakeup(&uap->port);
441
442 return;
443
444 ack_tx_int:
445 write_zsreg(uap, R0, RES_Tx_P);
446 zssync(uap);
447 }
448
449 /* Hrm... we register that twice, fixme later.... */
450 static irqreturn_t pmz_interrupt(int irq, void *dev_id)
451 {
452 struct uart_pmac_port *uap = dev_id;
453 struct uart_pmac_port *uap_a;
454 struct uart_pmac_port *uap_b;
455 int rc = IRQ_NONE;
456 struct tty_struct *tty;
457 u8 r3;
458
459 uap_a = pmz_get_port_A(uap);
460 uap_b = uap_a->mate;
461
462 spin_lock(&uap_a->port.lock);
463 r3 = read_zsreg(uap_a, R3);
464
465 #ifdef DEBUG_HARD
466 pmz_debug("irq, r3: %x\n", r3);
467 #endif
468 /* Channel A */
469 tty = NULL;
470 if (r3 & (CHAEXT | CHATxIP | CHARxIP)) {
471 if (!ZS_IS_OPEN(uap_a)) {
472 pmz_debug("ChanA interrupt while not open !\n");
473 goto skip_a;
474 }
475 write_zsreg(uap_a, R0, RES_H_IUS);
476 zssync(uap_a);
477 if (r3 & CHAEXT)
478 pmz_status_handle(uap_a);
479 if (r3 & CHARxIP)
480 tty = pmz_receive_chars(uap_a);
481 if (r3 & CHATxIP)
482 pmz_transmit_chars(uap_a);
483 rc = IRQ_HANDLED;
484 }
485 skip_a:
486 spin_unlock(&uap_a->port.lock);
487 if (tty != NULL)
488 tty_flip_buffer_push(tty);
489
490 if (!uap_b)
491 goto out;
492
493 spin_lock(&uap_b->port.lock);
494 tty = NULL;
495 if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) {
496 if (!ZS_IS_OPEN(uap_b)) {
497 pmz_debug("ChanB interrupt while not open !\n");
498 goto skip_b;
499 }
500 write_zsreg(uap_b, R0, RES_H_IUS);
501 zssync(uap_b);
502 if (r3 & CHBEXT)
503 pmz_status_handle(uap_b);
504 if (r3 & CHBRxIP)
505 tty = pmz_receive_chars(uap_b);
506 if (r3 & CHBTxIP)
507 pmz_transmit_chars(uap_b);
508 rc = IRQ_HANDLED;
509 }
510 skip_b:
511 spin_unlock(&uap_b->port.lock);
512 if (tty != NULL)
513 tty_flip_buffer_push(tty);
514
515 out:
516 return rc;
517 }
518
519 /*
520 * Peek the status register, lock not held by caller
521 */
522 static inline u8 pmz_peek_status(struct uart_pmac_port *uap)
523 {
524 unsigned long flags;
525 u8 status;
526
527 spin_lock_irqsave(&uap->port.lock, flags);
528 status = read_zsreg(uap, R0);
529 spin_unlock_irqrestore(&uap->port.lock, flags);
530
531 return status;
532 }
533
534 /*
535 * Check if transmitter is empty
536 * The port lock is not held.
537 */
538 static unsigned int pmz_tx_empty(struct uart_port *port)
539 {
540 unsigned char status;
541
542 status = pmz_peek_status(to_pmz(port));
543 if (status & Tx_BUF_EMP)
544 return TIOCSER_TEMT;
545 return 0;
546 }
547
548 /*
549 * Set Modem Control (RTS & DTR) bits
550 * The port lock is held and interrupts are disabled.
551 * Note: Shall we really filter out RTS on external ports or
552 * should that be dealt at higher level only ?
553 */
554 static void pmz_set_mctrl(struct uart_port *port, unsigned int mctrl)
555 {
556 struct uart_pmac_port *uap = to_pmz(port);
557 unsigned char set_bits, clear_bits;
558
559 /* Do nothing for irda for now... */
560 if (ZS_IS_IRDA(uap))
561 return;
562 /* We get called during boot with a port not up yet */
563 if (!(ZS_IS_OPEN(uap) || ZS_IS_CONS(uap)))
564 return;
565
566 set_bits = clear_bits = 0;
567
568 if (ZS_IS_INTMODEM(uap)) {
569 if (mctrl & TIOCM_RTS)
570 set_bits |= RTS;
571 else
572 clear_bits |= RTS;
573 }
574 if (mctrl & TIOCM_DTR)
575 set_bits |= DTR;
576 else
577 clear_bits |= DTR;
578
579 /* NOTE: Not subject to 'transmitter active' rule. */
580 uap->curregs[R5] |= set_bits;
581 uap->curregs[R5] &= ~clear_bits;
582
583 write_zsreg(uap, R5, uap->curregs[R5]);
584 pmz_debug("pmz_set_mctrl: set bits: %x, clear bits: %x -> %x\n",
585 set_bits, clear_bits, uap->curregs[R5]);
586 zssync(uap);
587 }
588
589 /*
590 * Get Modem Control bits (only the input ones, the core will
591 * or that with a cached value of the control ones)
592 * The port lock is held and interrupts are disabled.
593 */
594 static unsigned int pmz_get_mctrl(struct uart_port *port)
595 {
596 struct uart_pmac_port *uap = to_pmz(port);
597 unsigned char status;
598 unsigned int ret;
599
600 status = read_zsreg(uap, R0);
601
602 ret = 0;
603 if (status & DCD)
604 ret |= TIOCM_CAR;
605 if (status & SYNC_HUNT)
606 ret |= TIOCM_DSR;
607 if (!(status & CTS))
608 ret |= TIOCM_CTS;
609
610 return ret;
611 }
612
613 /*
614 * Stop TX side. Dealt like sunzilog at next Tx interrupt,
615 * though for DMA, we will have to do a bit more.
616 * The port lock is held and interrupts are disabled.
617 */
618 static void pmz_stop_tx(struct uart_port *port)
619 {
620 to_pmz(port)->flags |= PMACZILOG_FLAG_TX_STOPPED;
621 }
622
623 /*
624 * Kick the Tx side.
625 * The port lock is held and interrupts are disabled.
626 */
627 static void pmz_start_tx(struct uart_port *port)
628 {
629 struct uart_pmac_port *uap = to_pmz(port);
630 unsigned char status;
631
632 pmz_debug("pmz: start_tx()\n");
633
634 uap->flags |= PMACZILOG_FLAG_TX_ACTIVE;
635 uap->flags &= ~PMACZILOG_FLAG_TX_STOPPED;
636
637 status = read_zsreg(uap, R0);
638
639 /* TX busy? Just wait for the TX done interrupt. */
640 if (!(status & Tx_BUF_EMP))
641 return;
642
643 /* Send the first character to jump-start the TX done
644 * IRQ sending engine.
645 */
646 if (port->x_char) {
647 write_zsdata(uap, port->x_char);
648 zssync(uap);
649 port->icount.tx++;
650 port->x_char = 0;
651 } else {
652 struct circ_buf *xmit = &port->state->xmit;
653
654 write_zsdata(uap, xmit->buf[xmit->tail]);
655 zssync(uap);
656 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
657 port->icount.tx++;
658
659 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
660 uart_write_wakeup(&uap->port);
661 }
662 pmz_debug("pmz: start_tx() done.\n");
663 }
664
665 /*
666 * Stop Rx side, basically disable emitting of
667 * Rx interrupts on the port. We don't disable the rx
668 * side of the chip proper though
669 * The port lock is held.
670 */
671 static void pmz_stop_rx(struct uart_port *port)
672 {
673 struct uart_pmac_port *uap = to_pmz(port);
674
675 pmz_debug("pmz: stop_rx()()\n");
676
677 /* Disable all RX interrupts. */
678 uap->curregs[R1] &= ~RxINT_MASK;
679 pmz_maybe_update_regs(uap);
680
681 pmz_debug("pmz: stop_rx() done.\n");
682 }
683
684 /*
685 * Enable modem status change interrupts
686 * The port lock is held.
687 */
688 static void pmz_enable_ms(struct uart_port *port)
689 {
690 struct uart_pmac_port *uap = to_pmz(port);
691 unsigned char new_reg;
692
693 if (ZS_IS_IRDA(uap))
694 return;
695 new_reg = uap->curregs[R15] | (DCDIE | SYNCIE | CTSIE);
696 if (new_reg != uap->curregs[R15]) {
697 uap->curregs[R15] = new_reg;
698
699 /* NOTE: Not subject to 'transmitter active' rule. */
700 write_zsreg(uap, R15, uap->curregs[R15]);
701 }
702 }
703
704 /*
705 * Control break state emission
706 * The port lock is not held.
707 */
708 static void pmz_break_ctl(struct uart_port *port, int break_state)
709 {
710 struct uart_pmac_port *uap = to_pmz(port);
711 unsigned char set_bits, clear_bits, new_reg;
712 unsigned long flags;
713
714 set_bits = clear_bits = 0;
715
716 if (break_state)
717 set_bits |= SND_BRK;
718 else
719 clear_bits |= SND_BRK;
720
721 spin_lock_irqsave(&port->lock, flags);
722
723 new_reg = (uap->curregs[R5] | set_bits) & ~clear_bits;
724 if (new_reg != uap->curregs[R5]) {
725 uap->curregs[R5] = new_reg;
726 write_zsreg(uap, R5, uap->curregs[R5]);
727 }
728
729 spin_unlock_irqrestore(&port->lock, flags);
730 }
731
732 #ifdef CONFIG_PPC_PMAC
733
734 /*
735 * Turn power on or off to the SCC and associated stuff
736 * (port drivers, modem, IR port, etc.)
737 * Returns the number of milliseconds we should wait before
738 * trying to use the port.
739 */
740 static int pmz_set_scc_power(struct uart_pmac_port *uap, int state)
741 {
742 int delay = 0;
743 int rc;
744
745 if (state) {
746 rc = pmac_call_feature(
747 PMAC_FTR_SCC_ENABLE, uap->node, uap->port_type, 1);
748 pmz_debug("port power on result: %d\n", rc);
749 if (ZS_IS_INTMODEM(uap)) {
750 rc = pmac_call_feature(
751 PMAC_FTR_MODEM_ENABLE, uap->node, 0, 1);
752 delay = 2500; /* wait for 2.5s before using */
753 pmz_debug("modem power result: %d\n", rc);
754 }
755 } else {
756 /* TODO: Make that depend on a timer, don't power down
757 * immediately
758 */
759 if (ZS_IS_INTMODEM(uap)) {
760 rc = pmac_call_feature(
761 PMAC_FTR_MODEM_ENABLE, uap->node, 0, 0);
762 pmz_debug("port power off result: %d\n", rc);
763 }
764 pmac_call_feature(PMAC_FTR_SCC_ENABLE, uap->node, uap->port_type, 0);
765 }
766 return delay;
767 }
768
769 #else
770
771 static int pmz_set_scc_power(struct uart_pmac_port *uap, int state)
772 {
773 return 0;
774 }
775
776 #endif /* !CONFIG_PPC_PMAC */
777
778 /*
779 * FixZeroBug....Works around a bug in the SCC receiving channel.
780 * Inspired from Darwin code, 15 Sept. 2000 -DanM
781 *
782 * The following sequence prevents a problem that is seen with O'Hare ASICs
783 * (most versions -- also with some Heathrow and Hydra ASICs) where a zero
784 * at the input to the receiver becomes 'stuck' and locks up the receiver.
785 * This problem can occur as a result of a zero bit at the receiver input
786 * coincident with any of the following events:
787 *
788 * The SCC is initialized (hardware or software).
789 * A framing error is detected.
790 * The clocking option changes from synchronous or X1 asynchronous
791 * clocking to X16, X32, or X64 asynchronous clocking.
792 * The decoding mode is changed among NRZ, NRZI, FM0, or FM1.
793 *
794 * This workaround attempts to recover from the lockup condition by placing
795 * the SCC in synchronous loopback mode with a fast clock before programming
796 * any of the asynchronous modes.
797 */
798 static void pmz_fix_zero_bug_scc(struct uart_pmac_port *uap)
799 {
800 write_zsreg(uap, 9, ZS_IS_CHANNEL_A(uap) ? CHRA : CHRB);
801 zssync(uap);
802 udelay(10);
803 write_zsreg(uap, 9, (ZS_IS_CHANNEL_A(uap) ? CHRA : CHRB) | NV);
804 zssync(uap);
805
806 write_zsreg(uap, 4, X1CLK | MONSYNC);
807 write_zsreg(uap, 3, Rx8);
808 write_zsreg(uap, 5, Tx8 | RTS);
809 write_zsreg(uap, 9, NV); /* Didn't we already do this? */
810 write_zsreg(uap, 11, RCBR | TCBR);
811 write_zsreg(uap, 12, 0);
812 write_zsreg(uap, 13, 0);
813 write_zsreg(uap, 14, (LOOPBAK | BRSRC));
814 write_zsreg(uap, 14, (LOOPBAK | BRSRC | BRENAB));
815 write_zsreg(uap, 3, Rx8 | RxENABLE);
816 write_zsreg(uap, 0, RES_EXT_INT);
817 write_zsreg(uap, 0, RES_EXT_INT);
818 write_zsreg(uap, 0, RES_EXT_INT); /* to kill some time */
819
820 /* The channel should be OK now, but it is probably receiving
821 * loopback garbage.
822 * Switch to asynchronous mode, disable the receiver,
823 * and discard everything in the receive buffer.
824 */
825 write_zsreg(uap, 9, NV);
826 write_zsreg(uap, 4, X16CLK | SB_MASK);
827 write_zsreg(uap, 3, Rx8);
828
829 while (read_zsreg(uap, 0) & Rx_CH_AV) {
830 (void)read_zsreg(uap, 8);
831 write_zsreg(uap, 0, RES_EXT_INT);
832 write_zsreg(uap, 0, ERR_RES);
833 }
834 }
835
836 /*
837 * Real startup routine, powers up the hardware and sets up
838 * the SCC. Returns a delay in ms where you need to wait before
839 * actually using the port, this is typically the internal modem
840 * powerup delay. This routine expect the lock to be taken.
841 */
842 static int __pmz_startup(struct uart_pmac_port *uap)
843 {
844 int pwr_delay = 0;
845
846 memset(&uap->curregs, 0, sizeof(uap->curregs));
847
848 /* Power up the SCC & underlying hardware (modem/irda) */
849 pwr_delay = pmz_set_scc_power(uap, 1);
850
851 /* Nice buggy HW ... */
852 pmz_fix_zero_bug_scc(uap);
853
854 /* Reset the channel */
855 uap->curregs[R9] = 0;
856 write_zsreg(uap, 9, ZS_IS_CHANNEL_A(uap) ? CHRA : CHRB);
857 zssync(uap);
858 udelay(10);
859 write_zsreg(uap, 9, 0);
860 zssync(uap);
861
862 /* Clear the interrupt registers */
863 write_zsreg(uap, R1, 0);
864 write_zsreg(uap, R0, ERR_RES);
865 write_zsreg(uap, R0, ERR_RES);
866 write_zsreg(uap, R0, RES_H_IUS);
867 write_zsreg(uap, R0, RES_H_IUS);
868
869 /* Setup some valid baud rate */
870 uap->curregs[R4] = X16CLK | SB1;
871 uap->curregs[R3] = Rx8;
872 uap->curregs[R5] = Tx8 | RTS;
873 if (!ZS_IS_IRDA(uap))
874 uap->curregs[R5] |= DTR;
875 uap->curregs[R12] = 0;
876 uap->curregs[R13] = 0;
877 uap->curregs[R14] = BRENAB;
878
879 /* Clear handshaking, enable BREAK interrupts */
880 uap->curregs[R15] = BRKIE;
881
882 /* Master interrupt enable */
883 uap->curregs[R9] |= NV | MIE;
884
885 pmz_load_zsregs(uap, uap->curregs);
886
887 /* Enable receiver and transmitter. */
888 write_zsreg(uap, R3, uap->curregs[R3] |= RxENABLE);
889 write_zsreg(uap, R5, uap->curregs[R5] |= TxENABLE);
890
891 /* Remember status for DCD/CTS changes */
892 uap->prev_status = read_zsreg(uap, R0);
893
894 return pwr_delay;
895 }
896
897 static void pmz_irda_reset(struct uart_pmac_port *uap)
898 {
899 unsigned long flags;
900
901 spin_lock_irqsave(&uap->port.lock, flags);
902 uap->curregs[R5] |= DTR;
903 write_zsreg(uap, R5, uap->curregs[R5]);
904 zssync(uap);
905 spin_unlock_irqrestore(&uap->port.lock, flags);
906 msleep(110);
907
908 spin_lock_irqsave(&uap->port.lock, flags);
909 uap->curregs[R5] &= ~DTR;
910 write_zsreg(uap, R5, uap->curregs[R5]);
911 zssync(uap);
912 spin_unlock_irqrestore(&uap->port.lock, flags);
913 msleep(10);
914 }
915
916 /*
917 * This is the "normal" startup routine, using the above one
918 * wrapped with the lock and doing a schedule delay
919 */
920 static int pmz_startup(struct uart_port *port)
921 {
922 struct uart_pmac_port *uap = to_pmz(port);
923 unsigned long flags;
924 int pwr_delay = 0;
925
926 pmz_debug("pmz: startup()\n");
927
928 uap->flags |= PMACZILOG_FLAG_IS_OPEN;
929
930 /* A console is never powered down. Else, power up and
931 * initialize the chip
932 */
933 if (!ZS_IS_CONS(uap)) {
934 spin_lock_irqsave(&port->lock, flags);
935 pwr_delay = __pmz_startup(uap);
936 spin_unlock_irqrestore(&port->lock, flags);
937 }
938 sprintf(uap->irq_name, PMACZILOG_NAME"%d", uap->port.line);
939 if (request_irq(uap->port.irq, pmz_interrupt, IRQF_SHARED,
940 uap->irq_name, uap)) {
941 pmz_error("Unable to register zs interrupt handler.\n");
942 pmz_set_scc_power(uap, 0);
943 return -ENXIO;
944 }
945
946 /* Right now, we deal with delay by blocking here, I'll be
947 * smarter later on
948 */
949 if (pwr_delay != 0) {
950 pmz_debug("pmz: delaying %d ms\n", pwr_delay);
951 msleep(pwr_delay);
952 }
953
954 /* IrDA reset is done now */
955 if (ZS_IS_IRDA(uap))
956 pmz_irda_reset(uap);
957
958 /* Enable interrupt requests for the channel */
959 spin_lock_irqsave(&port->lock, flags);
960 pmz_interrupt_control(uap, 1);
961 spin_unlock_irqrestore(&port->lock, flags);
962
963 pmz_debug("pmz: startup() done.\n");
964
965 return 0;
966 }
967
968 static void pmz_shutdown(struct uart_port *port)
969 {
970 struct uart_pmac_port *uap = to_pmz(port);
971 unsigned long flags;
972
973 pmz_debug("pmz: shutdown()\n");
974
975 spin_lock_irqsave(&port->lock, flags);
976
977 /* Disable interrupt requests for the channel */
978 pmz_interrupt_control(uap, 0);
979
980 if (!ZS_IS_CONS(uap)) {
981 /* Disable receiver and transmitter */
982 uap->curregs[R3] &= ~RxENABLE;
983 uap->curregs[R5] &= ~TxENABLE;
984
985 /* Disable break assertion */
986 uap->curregs[R5] &= ~SND_BRK;
987 pmz_maybe_update_regs(uap);
988 }
989
990 spin_unlock_irqrestore(&port->lock, flags);
991
992 /* Release interrupt handler */
993 free_irq(uap->port.irq, uap);
994
995 spin_lock_irqsave(&port->lock, flags);
996
997 uap->flags &= ~PMACZILOG_FLAG_IS_OPEN;
998
999 if (!ZS_IS_CONS(uap))
1000 pmz_set_scc_power(uap, 0); /* Shut the chip down */
1001
1002 spin_unlock_irqrestore(&port->lock, flags);
1003
1004 pmz_debug("pmz: shutdown() done.\n");
1005 }
1006
1007 /* Shared by TTY driver and serial console setup. The port lock is held
1008 * and local interrupts are disabled.
1009 */
1010 static void pmz_convert_to_zs(struct uart_pmac_port *uap, unsigned int cflag,
1011 unsigned int iflag, unsigned long baud)
1012 {
1013 int brg;
1014
1015 /* Switch to external clocking for IrDA high clock rates. That
1016 * code could be re-used for Midi interfaces with different
1017 * multipliers
1018 */
1019 if (baud >= 115200 && ZS_IS_IRDA(uap)) {
1020 uap->curregs[R4] = X1CLK;
1021 uap->curregs[R11] = RCTRxCP | TCTRxCP;
1022 uap->curregs[R14] = 0; /* BRG off */
1023 uap->curregs[R12] = 0;
1024 uap->curregs[R13] = 0;
1025 uap->flags |= PMACZILOG_FLAG_IS_EXTCLK;
1026 } else {
1027 switch (baud) {
1028 case ZS_CLOCK/16: /* 230400 */
1029 uap->curregs[R4] = X16CLK;
1030 uap->curregs[R11] = 0;
1031 uap->curregs[R14] = 0;
1032 break;
1033 case ZS_CLOCK/32: /* 115200 */
1034 uap->curregs[R4] = X32CLK;
1035 uap->curregs[R11] = 0;
1036 uap->curregs[R14] = 0;
1037 break;
1038 default:
1039 uap->curregs[R4] = X16CLK;
1040 uap->curregs[R11] = TCBR | RCBR;
1041 brg = BPS_TO_BRG(baud, ZS_CLOCK / 16);
1042 uap->curregs[R12] = (brg & 255);
1043 uap->curregs[R13] = ((brg >> 8) & 255);
1044 uap->curregs[R14] = BRENAB;
1045 }
1046 uap->flags &= ~PMACZILOG_FLAG_IS_EXTCLK;
1047 }
1048
1049 /* Character size, stop bits, and parity. */
1050 uap->curregs[3] &= ~RxN_MASK;
1051 uap->curregs[5] &= ~TxN_MASK;
1052
1053 switch (cflag & CSIZE) {
1054 case CS5:
1055 uap->curregs[3] |= Rx5;
1056 uap->curregs[5] |= Tx5;
1057 uap->parity_mask = 0x1f;
1058 break;
1059 case CS6:
1060 uap->curregs[3] |= Rx6;
1061 uap->curregs[5] |= Tx6;
1062 uap->parity_mask = 0x3f;
1063 break;
1064 case CS7:
1065 uap->curregs[3] |= Rx7;
1066 uap->curregs[5] |= Tx7;
1067 uap->parity_mask = 0x7f;
1068 break;
1069 case CS8:
1070 default:
1071 uap->curregs[3] |= Rx8;
1072 uap->curregs[5] |= Tx8;
1073 uap->parity_mask = 0xff;
1074 break;
1075 };
1076 uap->curregs[4] &= ~(SB_MASK);
1077 if (cflag & CSTOPB)
1078 uap->curregs[4] |= SB2;
1079 else
1080 uap->curregs[4] |= SB1;
1081 if (cflag & PARENB)
1082 uap->curregs[4] |= PAR_ENAB;
1083 else
1084 uap->curregs[4] &= ~PAR_ENAB;
1085 if (!(cflag & PARODD))
1086 uap->curregs[4] |= PAR_EVEN;
1087 else
1088 uap->curregs[4] &= ~PAR_EVEN;
1089
1090 uap->port.read_status_mask = Rx_OVR;
1091 if (iflag & INPCK)
1092 uap->port.read_status_mask |= CRC_ERR | PAR_ERR;
1093 if (iflag & (BRKINT | PARMRK))
1094 uap->port.read_status_mask |= BRK_ABRT;
1095
1096 uap->port.ignore_status_mask = 0;
1097 if (iflag & IGNPAR)
1098 uap->port.ignore_status_mask |= CRC_ERR | PAR_ERR;
1099 if (iflag & IGNBRK) {
1100 uap->port.ignore_status_mask |= BRK_ABRT;
1101 if (iflag & IGNPAR)
1102 uap->port.ignore_status_mask |= Rx_OVR;
1103 }
1104
1105 if ((cflag & CREAD) == 0)
1106 uap->port.ignore_status_mask = 0xff;
1107 }
1108
1109
1110 /*
1111 * Set the irda codec on the imac to the specified baud rate.
1112 */
1113 static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud)
1114 {
1115 u8 cmdbyte;
1116 int t, version;
1117
1118 switch (*baud) {
1119 /* SIR modes */
1120 case 2400:
1121 cmdbyte = 0x53;
1122 break;
1123 case 4800:
1124 cmdbyte = 0x52;
1125 break;
1126 case 9600:
1127 cmdbyte = 0x51;
1128 break;
1129 case 19200:
1130 cmdbyte = 0x50;
1131 break;
1132 case 38400:
1133 cmdbyte = 0x4f;
1134 break;
1135 case 57600:
1136 cmdbyte = 0x4e;
1137 break;
1138 case 115200:
1139 cmdbyte = 0x4d;
1140 break;
1141 /* The FIR modes aren't really supported at this point, how
1142 * do we select the speed ? via the FCR on KeyLargo ?
1143 */
1144 case 1152000:
1145 cmdbyte = 0;
1146 break;
1147 case 4000000:
1148 cmdbyte = 0;
1149 break;
1150 default: /* 9600 */
1151 cmdbyte = 0x51;
1152 *baud = 9600;
1153 break;
1154 }
1155
1156 /* Wait for transmitter to drain */
1157 t = 10000;
1158 while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0
1159 || (read_zsreg(uap, R1) & ALL_SNT) == 0) {
1160 if (--t <= 0) {
1161 pmz_error("transmitter didn't drain\n");
1162 return;
1163 }
1164 udelay(10);
1165 }
1166
1167 /* Drain the receiver too */
1168 t = 100;
1169 (void)read_zsdata(uap);
1170 (void)read_zsdata(uap);
1171 (void)read_zsdata(uap);
1172 mdelay(10);
1173 while (read_zsreg(uap, R0) & Rx_CH_AV) {
1174 read_zsdata(uap);
1175 mdelay(10);
1176 if (--t <= 0) {
1177 pmz_error("receiver didn't drain\n");
1178 return;
1179 }
1180 }
1181
1182 /* Switch to command mode */
1183 uap->curregs[R5] |= DTR;
1184 write_zsreg(uap, R5, uap->curregs[R5]);
1185 zssync(uap);
1186 mdelay(1);
1187
1188 /* Switch SCC to 19200 */
1189 pmz_convert_to_zs(uap, CS8, 0, 19200);
1190 pmz_load_zsregs(uap, uap->curregs);
1191 mdelay(1);
1192
1193 /* Write get_version command byte */
1194 write_zsdata(uap, 1);
1195 t = 5000;
1196 while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) {
1197 if (--t <= 0) {
1198 pmz_error("irda_setup timed out on get_version byte\n");
1199 goto out;
1200 }
1201 udelay(10);
1202 }
1203 version = read_zsdata(uap);
1204
1205 if (version < 4) {
1206 pmz_info("IrDA: dongle version %d not supported\n", version);
1207 goto out;
1208 }
1209
1210 /* Send speed mode */
1211 write_zsdata(uap, cmdbyte);
1212 t = 5000;
1213 while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) {
1214 if (--t <= 0) {
1215 pmz_error("irda_setup timed out on speed mode byte\n");
1216 goto out;
1217 }
1218 udelay(10);
1219 }
1220 t = read_zsdata(uap);
1221 if (t != cmdbyte)
1222 pmz_error("irda_setup speed mode byte = %x (%x)\n", t, cmdbyte);
1223
1224 pmz_info("IrDA setup for %ld bps, dongle version: %d\n",
1225 *baud, version);
1226
1227 (void)read_zsdata(uap);
1228 (void)read_zsdata(uap);
1229 (void)read_zsdata(uap);
1230
1231 out:
1232 /* Switch back to data mode */
1233 uap->curregs[R5] &= ~DTR;
1234 write_zsreg(uap, R5, uap->curregs[R5]);
1235 zssync(uap);
1236
1237 (void)read_zsdata(uap);
1238 (void)read_zsdata(uap);
1239 (void)read_zsdata(uap);
1240 }
1241
1242
1243 static void __pmz_set_termios(struct uart_port *port, struct ktermios *termios,
1244 struct ktermios *old)
1245 {
1246 struct uart_pmac_port *uap = to_pmz(port);
1247 unsigned long baud;
1248
1249 pmz_debug("pmz: set_termios()\n");
1250
1251 memcpy(&uap->termios_cache, termios, sizeof(struct ktermios));
1252
1253 /* XXX Check which revs of machines actually allow 1 and 4Mb speeds
1254 * on the IR dongle. Note that the IRTTY driver currently doesn't know
1255 * about the FIR mode and high speed modes. So these are unused. For
1256 * implementing proper support for these, we should probably add some
1257 * DMA as well, at least on the Rx side, which isn't a simple thing
1258 * at this point.
1259 */
1260 if (ZS_IS_IRDA(uap)) {
1261 /* Calc baud rate */
1262 baud = uart_get_baud_rate(port, termios, old, 1200, 4000000);
1263 pmz_debug("pmz: switch IRDA to %ld bauds\n", baud);
1264 /* Cet the irda codec to the right rate */
1265 pmz_irda_setup(uap, &baud);
1266 /* Set final baud rate */
1267 pmz_convert_to_zs(uap, termios->c_cflag, termios->c_iflag, baud);
1268 pmz_load_zsregs(uap, uap->curregs);
1269 zssync(uap);
1270 } else {
1271 baud = uart_get_baud_rate(port, termios, old, 1200, 230400);
1272 pmz_convert_to_zs(uap, termios->c_cflag, termios->c_iflag, baud);
1273 /* Make sure modem status interrupts are correctly configured */
1274 if (UART_ENABLE_MS(&uap->port, termios->c_cflag)) {
1275 uap->curregs[R15] |= DCDIE | SYNCIE | CTSIE;
1276 uap->flags |= PMACZILOG_FLAG_MODEM_STATUS;
1277 } else {
1278 uap->curregs[R15] &= ~(DCDIE | SYNCIE | CTSIE);
1279 uap->flags &= ~PMACZILOG_FLAG_MODEM_STATUS;
1280 }
1281
1282 /* Load registers to the chip */
1283 pmz_maybe_update_regs(uap);
1284 }
1285 uart_update_timeout(port, termios->c_cflag, baud);
1286
1287 pmz_debug("pmz: set_termios() done.\n");
1288 }
1289
1290 /* The port lock is not held. */
1291 static void pmz_set_termios(struct uart_port *port, struct ktermios *termios,
1292 struct ktermios *old)
1293 {
1294 struct uart_pmac_port *uap = to_pmz(port);
1295 unsigned long flags;
1296
1297 spin_lock_irqsave(&port->lock, flags);
1298
1299 /* Disable IRQs on the port */
1300 pmz_interrupt_control(uap, 0);
1301
1302 /* Setup new port configuration */
1303 __pmz_set_termios(port, termios, old);
1304
1305 /* Re-enable IRQs on the port */
1306 if (ZS_IS_OPEN(uap))
1307 pmz_interrupt_control(uap, 1);
1308
1309 spin_unlock_irqrestore(&port->lock, flags);
1310 }
1311
1312 static const char *pmz_type(struct uart_port *port)
1313 {
1314 struct uart_pmac_port *uap = to_pmz(port);
1315
1316 if (ZS_IS_IRDA(uap))
1317 return "Z85c30 ESCC - Infrared port";
1318 else if (ZS_IS_INTMODEM(uap))
1319 return "Z85c30 ESCC - Internal modem";
1320 return "Z85c30 ESCC - Serial port";
1321 }
1322
1323 /* We do not request/release mappings of the registers here, this
1324 * happens at early serial probe time.
1325 */
1326 static void pmz_release_port(struct uart_port *port)
1327 {
1328 }
1329
1330 static int pmz_request_port(struct uart_port *port)
1331 {
1332 return 0;
1333 }
1334
1335 /* These do not need to do anything interesting either. */
1336 static void pmz_config_port(struct uart_port *port, int flags)
1337 {
1338 }
1339
1340 /* We do not support letting the user mess with the divisor, IRQ, etc. */
1341 static int pmz_verify_port(struct uart_port *port, struct serial_struct *ser)
1342 {
1343 return -EINVAL;
1344 }
1345
1346 #ifdef CONFIG_CONSOLE_POLL
1347
1348 static int pmz_poll_get_char(struct uart_port *port)
1349 {
1350 struct uart_pmac_port *uap = (struct uart_pmac_port *)port;
1351 int tries = 2;
1352
1353 while (tries) {
1354 if ((read_zsreg(uap, R0) & Rx_CH_AV) != 0)
1355 return read_zsdata(uap);
1356 if (tries--)
1357 udelay(5);
1358 }
1359
1360 return NO_POLL_CHAR;
1361 }
1362
1363 static void pmz_poll_put_char(struct uart_port *port, unsigned char c)
1364 {
1365 struct uart_pmac_port *uap = (struct uart_pmac_port *)port;
1366
1367 /* Wait for the transmit buffer to empty. */
1368 while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0)
1369 udelay(5);
1370 write_zsdata(uap, c);
1371 }
1372
1373 #endif /* CONFIG_CONSOLE_POLL */
1374
1375 static struct uart_ops pmz_pops = {
1376 .tx_empty = pmz_tx_empty,
1377 .set_mctrl = pmz_set_mctrl,
1378 .get_mctrl = pmz_get_mctrl,
1379 .stop_tx = pmz_stop_tx,
1380 .start_tx = pmz_start_tx,
1381 .stop_rx = pmz_stop_rx,
1382 .enable_ms = pmz_enable_ms,
1383 .break_ctl = pmz_break_ctl,
1384 .startup = pmz_startup,
1385 .shutdown = pmz_shutdown,
1386 .set_termios = pmz_set_termios,
1387 .type = pmz_type,
1388 .release_port = pmz_release_port,
1389 .request_port = pmz_request_port,
1390 .config_port = pmz_config_port,
1391 .verify_port = pmz_verify_port,
1392 #ifdef CONFIG_CONSOLE_POLL
1393 .poll_get_char = pmz_poll_get_char,
1394 .poll_put_char = pmz_poll_put_char,
1395 #endif
1396 };
1397
1398 #ifdef CONFIG_PPC_PMAC
1399
1400 /*
1401 * Setup one port structure after probing, HW is down at this point,
1402 * Unlike sunzilog, we don't need to pre-init the spinlock as we don't
1403 * register our console before uart_add_one_port() is called
1404 */
1405 static int __init pmz_init_port(struct uart_pmac_port *uap)
1406 {
1407 struct device_node *np = uap->node;
1408 const char *conn;
1409 const struct slot_names_prop {
1410 int count;
1411 char name[1];
1412 } *slots;
1413 int len;
1414 struct resource r_ports, r_rxdma, r_txdma;
1415
1416 /*
1417 * Request & map chip registers
1418 */
1419 if (of_address_to_resource(np, 0, &r_ports))
1420 return -ENODEV;
1421 uap->port.mapbase = r_ports.start;
1422 uap->port.membase = ioremap(uap->port.mapbase, 0x1000);
1423
1424 uap->control_reg = uap->port.membase;
1425 uap->data_reg = uap->control_reg + 0x10;
1426
1427 /*
1428 * Request & map DBDMA registers
1429 */
1430 #ifdef HAS_DBDMA
1431 if (of_address_to_resource(np, 1, &r_txdma) == 0 &&
1432 of_address_to_resource(np, 2, &r_rxdma) == 0)
1433 uap->flags |= PMACZILOG_FLAG_HAS_DMA;
1434 #else
1435 memset(&r_txdma, 0, sizeof(struct resource));
1436 memset(&r_rxdma, 0, sizeof(struct resource));
1437 #endif
1438 if (ZS_HAS_DMA(uap)) {
1439 uap->tx_dma_regs = ioremap(r_txdma.start, 0x100);
1440 if (uap->tx_dma_regs == NULL) {
1441 uap->flags &= ~PMACZILOG_FLAG_HAS_DMA;
1442 goto no_dma;
1443 }
1444 uap->rx_dma_regs = ioremap(r_rxdma.start, 0x100);
1445 if (uap->rx_dma_regs == NULL) {
1446 iounmap(uap->tx_dma_regs);
1447 uap->tx_dma_regs = NULL;
1448 uap->flags &= ~PMACZILOG_FLAG_HAS_DMA;
1449 goto no_dma;
1450 }
1451 uap->tx_dma_irq = irq_of_parse_and_map(np, 1);
1452 uap->rx_dma_irq = irq_of_parse_and_map(np, 2);
1453 }
1454 no_dma:
1455
1456 /*
1457 * Detect port type
1458 */
1459 if (of_device_is_compatible(np, "cobalt"))
1460 uap->flags |= PMACZILOG_FLAG_IS_INTMODEM;
1461 conn = of_get_property(np, "AAPL,connector", &len);
1462 if (conn && (strcmp(conn, "infrared") == 0))
1463 uap->flags |= PMACZILOG_FLAG_IS_IRDA;
1464 uap->port_type = PMAC_SCC_ASYNC;
1465 /* 1999 Powerbook G3 has slot-names property instead */
1466 slots = of_get_property(np, "slot-names", &len);
1467 if (slots && slots->count > 0) {
1468 if (strcmp(slots->name, "IrDA") == 0)
1469 uap->flags |= PMACZILOG_FLAG_IS_IRDA;
1470 else if (strcmp(slots->name, "Modem") == 0)
1471 uap->flags |= PMACZILOG_FLAG_IS_INTMODEM;
1472 }
1473 if (ZS_IS_IRDA(uap))
1474 uap->port_type = PMAC_SCC_IRDA;
1475 if (ZS_IS_INTMODEM(uap)) {
1476 struct device_node* i2c_modem =
1477 of_find_node_by_name(NULL, "i2c-modem");
1478 if (i2c_modem) {
1479 const char* mid =
1480 of_get_property(i2c_modem, "modem-id", NULL);
1481 if (mid) switch(*mid) {
1482 case 0x04 :
1483 case 0x05 :
1484 case 0x07 :
1485 case 0x08 :
1486 case 0x0b :
1487 case 0x0c :
1488 uap->port_type = PMAC_SCC_I2S1;
1489 }
1490 printk(KERN_INFO "pmac_zilog: i2c-modem detected, id: %d\n",
1491 mid ? (*mid) : 0);
1492 of_node_put(i2c_modem);
1493 } else {
1494 printk(KERN_INFO "pmac_zilog: serial modem detected\n");
1495 }
1496 }
1497
1498 /*
1499 * Init remaining bits of "port" structure
1500 */
1501 uap->port.iotype = UPIO_MEM;
1502 uap->port.irq = irq_of_parse_and_map(np, 0);
1503 uap->port.uartclk = ZS_CLOCK;
1504 uap->port.fifosize = 1;
1505 uap->port.ops = &pmz_pops;
1506 uap->port.type = PORT_PMAC_ZILOG;
1507 uap->port.flags = 0;
1508
1509 /*
1510 * Fixup for the port on Gatwick for which the device-tree has
1511 * missing interrupts. Normally, the macio_dev would contain
1512 * fixed up interrupt info, but we use the device-tree directly
1513 * here due to early probing so we need the fixup too.
1514 */
1515 if (uap->port.irq == 0 &&
1516 np->parent && np->parent->parent &&
1517 of_device_is_compatible(np->parent->parent, "gatwick")) {
1518 /* IRQs on gatwick are offset by 64 */
1519 uap->port.irq = irq_create_mapping(NULL, 64 + 15);
1520 uap->tx_dma_irq = irq_create_mapping(NULL, 64 + 4);
1521 uap->rx_dma_irq = irq_create_mapping(NULL, 64 + 5);
1522 }
1523
1524 /* Setup some valid baud rate information in the register
1525 * shadows so we don't write crap there before baud rate is
1526 * first initialized.
1527 */
1528 pmz_convert_to_zs(uap, CS8, 0, 9600);
1529
1530 return 0;
1531 }
1532
1533 /*
1534 * Get rid of a port on module removal
1535 */
1536 static void pmz_dispose_port(struct uart_pmac_port *uap)
1537 {
1538 struct device_node *np;
1539
1540 np = uap->node;
1541 iounmap(uap->rx_dma_regs);
1542 iounmap(uap->tx_dma_regs);
1543 iounmap(uap->control_reg);
1544 uap->node = NULL;
1545 of_node_put(np);
1546 memset(uap, 0, sizeof(struct uart_pmac_port));
1547 }
1548
1549 /*
1550 * Called upon match with an escc node in the device-tree.
1551 */
1552 static int pmz_attach(struct macio_dev *mdev, const struct of_device_id *match)
1553 {
1554 struct uart_pmac_port *uap;
1555 int i;
1556
1557 /* Iterate the pmz_ports array to find a matching entry
1558 */
1559 for (i = 0; i < MAX_ZS_PORTS; i++)
1560 if (pmz_ports[i].node == mdev->ofdev.dev.of_node)
1561 break;
1562 if (i >= MAX_ZS_PORTS)
1563 return -ENODEV;
1564
1565
1566 uap = &pmz_ports[i];
1567 uap->dev = mdev;
1568 uap->port.dev = &mdev->ofdev.dev;
1569 dev_set_drvdata(&mdev->ofdev.dev, uap);
1570
1571 /* We still activate the port even when failing to request resources
1572 * to work around bugs in ancient Apple device-trees
1573 */
1574 if (macio_request_resources(uap->dev, "pmac_zilog"))
1575 printk(KERN_WARNING "%s: Failed to request resource"
1576 ", port still active\n",
1577 uap->node->name);
1578 else
1579 uap->flags |= PMACZILOG_FLAG_RSRC_REQUESTED;
1580
1581 return uart_add_one_port(&pmz_uart_reg, &uap->port);
1582 }
1583
1584 /*
1585 * That one should not be called, macio isn't really a hotswap device,
1586 * we don't expect one of those serial ports to go away...
1587 */
1588 static int pmz_detach(struct macio_dev *mdev)
1589 {
1590 struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev);
1591
1592 if (!uap)
1593 return -ENODEV;
1594
1595 uart_remove_one_port(&pmz_uart_reg, &uap->port);
1596
1597 if (uap->flags & PMACZILOG_FLAG_RSRC_REQUESTED) {
1598 macio_release_resources(uap->dev);
1599 uap->flags &= ~PMACZILOG_FLAG_RSRC_REQUESTED;
1600 }
1601 dev_set_drvdata(&mdev->ofdev.dev, NULL);
1602 uap->dev = NULL;
1603 uap->port.dev = NULL;
1604
1605 return 0;
1606 }
1607
1608
1609 static int pmz_suspend(struct macio_dev *mdev, pm_message_t pm_state)
1610 {
1611 struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev);
1612
1613 if (uap == NULL) {
1614 printk("HRM... pmz_suspend with NULL uap\n");
1615 return 0;
1616 }
1617
1618 uart_suspend_port(&pmz_uart_reg, &uap->port);
1619
1620 return 0;
1621 }
1622
1623
1624 static int pmz_resume(struct macio_dev *mdev)
1625 {
1626 struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev);
1627
1628 if (uap == NULL)
1629 return 0;
1630
1631 uart_resume_port(&pmz_uart_reg, &uap->port);
1632
1633 return 0;
1634 }
1635
1636 /*
1637 * Probe all ports in the system and build the ports array, we register
1638 * with the serial layer later, so we get a proper struct device which
1639 * allows the tty to attach properly. This is later than it used to be
1640 * but the tty layer really wants it that way.
1641 */
1642 static int __init pmz_probe(void)
1643 {
1644 struct device_node *node_p, *node_a, *node_b, *np;
1645 int count = 0;
1646 int rc;
1647
1648 /*
1649 * Find all escc chips in the system
1650 */
1651 node_p = of_find_node_by_name(NULL, "escc");
1652 while (node_p) {
1653 /*
1654 * First get channel A/B node pointers
1655 *
1656 * TODO: Add routines with proper locking to do that...
1657 */
1658 node_a = node_b = NULL;
1659 for (np = NULL; (np = of_get_next_child(node_p, np)) != NULL;) {
1660 if (strncmp(np->name, "ch-a", 4) == 0)
1661 node_a = of_node_get(np);
1662 else if (strncmp(np->name, "ch-b", 4) == 0)
1663 node_b = of_node_get(np);
1664 }
1665 if (!node_a && !node_b) {
1666 of_node_put(node_a);
1667 of_node_put(node_b);
1668 printk(KERN_ERR "pmac_zilog: missing node %c for escc %s\n",
1669 (!node_a) ? 'a' : 'b', node_p->full_name);
1670 goto next;
1671 }
1672
1673 /*
1674 * Fill basic fields in the port structures
1675 */
1676 if (node_b != NULL) {
1677 pmz_ports[count].mate = &pmz_ports[count+1];
1678 pmz_ports[count+1].mate = &pmz_ports[count];
1679 }
1680 pmz_ports[count].flags = PMACZILOG_FLAG_IS_CHANNEL_A;
1681 pmz_ports[count].node = node_a;
1682 pmz_ports[count+1].node = node_b;
1683 pmz_ports[count].port.line = count;
1684 pmz_ports[count+1].port.line = count+1;
1685
1686 /*
1687 * Setup the ports for real
1688 */
1689 rc = pmz_init_port(&pmz_ports[count]);
1690 if (rc == 0 && node_b != NULL)
1691 rc = pmz_init_port(&pmz_ports[count+1]);
1692 if (rc != 0) {
1693 of_node_put(node_a);
1694 of_node_put(node_b);
1695 memset(&pmz_ports[count], 0, sizeof(struct uart_pmac_port));
1696 memset(&pmz_ports[count+1], 0, sizeof(struct uart_pmac_port));
1697 goto next;
1698 }
1699 count += 2;
1700 next:
1701 node_p = of_find_node_by_name(node_p, "escc");
1702 }
1703 pmz_ports_count = count;
1704
1705 return 0;
1706 }
1707
1708 #else
1709
1710 extern struct platform_device scc_a_pdev, scc_b_pdev;
1711
1712 static int __init pmz_init_port(struct uart_pmac_port *uap)
1713 {
1714 struct resource *r_ports;
1715 int irq;
1716
1717 r_ports = platform_get_resource(uap->pdev, IORESOURCE_MEM, 0);
1718 irq = platform_get_irq(uap->pdev, 0);
1719 if (!r_ports || !irq)
1720 return -ENODEV;
1721
1722 uap->port.mapbase = r_ports->start;
1723 uap->port.membase = (unsigned char __iomem *) r_ports->start;
1724 uap->port.iotype = UPIO_MEM;
1725 uap->port.irq = irq;
1726 uap->port.uartclk = ZS_CLOCK;
1727 uap->port.fifosize = 1;
1728 uap->port.ops = &pmz_pops;
1729 uap->port.type = PORT_PMAC_ZILOG;
1730 uap->port.flags = 0;
1731
1732 uap->control_reg = uap->port.membase;
1733 uap->data_reg = uap->control_reg + 4;
1734 uap->port_type = 0;
1735
1736 pmz_convert_to_zs(uap, CS8, 0, 9600);
1737
1738 return 0;
1739 }
1740
1741 static int __init pmz_probe(void)
1742 {
1743 int err;
1744
1745 pmz_ports_count = 0;
1746
1747 pmz_ports[0].port.line = 0;
1748 pmz_ports[0].flags = PMACZILOG_FLAG_IS_CHANNEL_A;
1749 pmz_ports[0].pdev = &scc_a_pdev;
1750 err = pmz_init_port(&pmz_ports[0]);
1751 if (err)
1752 return err;
1753 pmz_ports_count++;
1754
1755 pmz_ports[0].mate = &pmz_ports[1];
1756 pmz_ports[1].mate = &pmz_ports[0];
1757 pmz_ports[1].port.line = 1;
1758 pmz_ports[1].flags = 0;
1759 pmz_ports[1].pdev = &scc_b_pdev;
1760 err = pmz_init_port(&pmz_ports[1]);
1761 if (err)
1762 return err;
1763 pmz_ports_count++;
1764
1765 return 0;
1766 }
1767
1768 static void pmz_dispose_port(struct uart_pmac_port *uap)
1769 {
1770 memset(uap, 0, sizeof(struct uart_pmac_port));
1771 }
1772
1773 static int __init pmz_attach(struct platform_device *pdev)
1774 {
1775 struct uart_pmac_port *uap;
1776 int i;
1777
1778 /* Iterate the pmz_ports array to find a matching entry */
1779 for (i = 0; i < pmz_ports_count; i++)
1780 if (pmz_ports[i].pdev == pdev)
1781 break;
1782 if (i >= pmz_ports_count)
1783 return -ENODEV;
1784
1785 uap = &pmz_ports[i];
1786 uap->port.dev = &pdev->dev;
1787 platform_set_drvdata(pdev, uap);
1788
1789 return uart_add_one_port(&pmz_uart_reg, &uap->port);
1790 }
1791
1792 static int __exit pmz_detach(struct platform_device *pdev)
1793 {
1794 struct uart_pmac_port *uap = platform_get_drvdata(pdev);
1795
1796 if (!uap)
1797 return -ENODEV;
1798
1799 uart_remove_one_port(&pmz_uart_reg, &uap->port);
1800
1801 platform_set_drvdata(pdev, NULL);
1802 uap->port.dev = NULL;
1803
1804 return 0;
1805 }
1806
1807 #endif /* !CONFIG_PPC_PMAC */
1808
1809 #ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
1810
1811 static void pmz_console_write(struct console *con, const char *s, unsigned int count);
1812 static int __init pmz_console_setup(struct console *co, char *options);
1813
1814 static struct console pmz_console = {
1815 .name = PMACZILOG_NAME,
1816 .write = pmz_console_write,
1817 .device = uart_console_device,
1818 .setup = pmz_console_setup,
1819 .flags = CON_PRINTBUFFER,
1820 .index = -1,
1821 .data = &pmz_uart_reg,
1822 };
1823
1824 #define PMACZILOG_CONSOLE &pmz_console
1825 #else /* CONFIG_SERIAL_PMACZILOG_CONSOLE */
1826 #define PMACZILOG_CONSOLE (NULL)
1827 #endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */
1828
1829 /*
1830 * Register the driver, console driver and ports with the serial
1831 * core
1832 */
1833 static int __init pmz_register(void)
1834 {
1835 pmz_uart_reg.nr = pmz_ports_count;
1836 pmz_uart_reg.cons = PMACZILOG_CONSOLE;
1837
1838 /*
1839 * Register this driver with the serial core
1840 */
1841 return uart_register_driver(&pmz_uart_reg);
1842 }
1843
1844 #ifdef CONFIG_PPC_PMAC
1845
1846 static struct of_device_id pmz_match[] =
1847 {
1848 {
1849 .name = "ch-a",
1850 },
1851 {
1852 .name = "ch-b",
1853 },
1854 {},
1855 };
1856 MODULE_DEVICE_TABLE (of, pmz_match);
1857
1858 static struct macio_driver pmz_driver = {
1859 .driver = {
1860 .name = "pmac_zilog",
1861 .owner = THIS_MODULE,
1862 .of_match_table = pmz_match,
1863 },
1864 .probe = pmz_attach,
1865 .remove = pmz_detach,
1866 .suspend = pmz_suspend,
1867 .resume = pmz_resume,
1868 };
1869
1870 #else
1871
1872 static struct platform_driver pmz_driver = {
1873 .remove = __exit_p(pmz_detach),
1874 .driver = {
1875 .name = "scc",
1876 .owner = THIS_MODULE,
1877 },
1878 };
1879
1880 #endif /* !CONFIG_PPC_PMAC */
1881
1882 static int __init init_pmz(void)
1883 {
1884 int rc, i;
1885 printk(KERN_INFO "%s\n", version);
1886
1887 /*
1888 * First, we need to do a direct OF-based probe pass. We
1889 * do that because we want serial console up before the
1890 * macio stuffs calls us back, and since that makes it
1891 * easier to pass the proper number of channels to
1892 * uart_register_driver()
1893 */
1894 if (pmz_ports_count == 0)
1895 pmz_probe();
1896
1897 /*
1898 * Bail early if no port found
1899 */
1900 if (pmz_ports_count == 0)
1901 return -ENODEV;
1902
1903 /*
1904 * Now we register with the serial layer
1905 */
1906 rc = pmz_register();
1907 if (rc) {
1908 printk(KERN_ERR
1909 "pmac_zilog: Error registering serial device, disabling pmac_zilog.\n"
1910 "pmac_zilog: Did another serial driver already claim the minors?\n");
1911 /* effectively "pmz_unprobe()" */
1912 for (i=0; i < pmz_ports_count; i++)
1913 pmz_dispose_port(&pmz_ports[i]);
1914 return rc;
1915 }
1916
1917 /*
1918 * Then we register the macio driver itself
1919 */
1920 #ifdef CONFIG_PPC_PMAC
1921 return macio_register_driver(&pmz_driver);
1922 #else
1923 return platform_driver_probe(&pmz_driver, pmz_attach);
1924 #endif
1925 }
1926
1927 static void __exit exit_pmz(void)
1928 {
1929 int i;
1930
1931 #ifdef CONFIG_PPC_PMAC
1932 /* Get rid of macio-driver (detach from macio) */
1933 macio_unregister_driver(&pmz_driver);
1934 #else
1935 platform_driver_unregister(&pmz_driver);
1936 #endif
1937
1938 for (i = 0; i < pmz_ports_count; i++) {
1939 struct uart_pmac_port *uport = &pmz_ports[i];
1940 #ifdef CONFIG_PPC_PMAC
1941 if (uport->node != NULL)
1942 pmz_dispose_port(uport);
1943 #else
1944 if (uport->pdev != NULL)
1945 pmz_dispose_port(uport);
1946 #endif
1947 }
1948 /* Unregister UART driver */
1949 uart_unregister_driver(&pmz_uart_reg);
1950 }
1951
1952 #ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
1953
1954 static void pmz_console_putchar(struct uart_port *port, int ch)
1955 {
1956 struct uart_pmac_port *uap = (struct uart_pmac_port *)port;
1957
1958 /* Wait for the transmit buffer to empty. */
1959 while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0)
1960 udelay(5);
1961 write_zsdata(uap, ch);
1962 }
1963
1964 /*
1965 * Print a string to the serial port trying not to disturb
1966 * any possible real use of the port...
1967 */
1968 static void pmz_console_write(struct console *con, const char *s, unsigned int count)
1969 {
1970 struct uart_pmac_port *uap = &pmz_ports[con->index];
1971 unsigned long flags;
1972
1973 spin_lock_irqsave(&uap->port.lock, flags);
1974
1975 /* Turn of interrupts and enable the transmitter. */
1976 write_zsreg(uap, R1, uap->curregs[1] & ~TxINT_ENAB);
1977 write_zsreg(uap, R5, uap->curregs[5] | TxENABLE | RTS | DTR);
1978
1979 uart_console_write(&uap->port, s, count, pmz_console_putchar);
1980
1981 /* Restore the values in the registers. */
1982 write_zsreg(uap, R1, uap->curregs[1]);
1983 /* Don't disable the transmitter. */
1984
1985 spin_unlock_irqrestore(&uap->port.lock, flags);
1986 }
1987
1988 /*
1989 * Setup the serial console
1990 */
1991 static int __init pmz_console_setup(struct console *co, char *options)
1992 {
1993 struct uart_pmac_port *uap;
1994 struct uart_port *port;
1995 int baud = 38400;
1996 int bits = 8;
1997 int parity = 'n';
1998 int flow = 'n';
1999 unsigned long pwr_delay;
2000
2001 /*
2002 * XServe's default to 57600 bps
2003 */
2004 if (of_machine_is_compatible("RackMac1,1")
2005 || of_machine_is_compatible("RackMac1,2")
2006 || of_machine_is_compatible("MacRISC4"))
2007 baud = 57600;
2008
2009 /*
2010 * Check whether an invalid uart number has been specified, and
2011 * if so, search for the first available port that does have
2012 * console support.
2013 */
2014 if (co->index >= pmz_ports_count)
2015 co->index = 0;
2016 uap = &pmz_ports[co->index];
2017 #ifdef CONFIG_PPC_PMAC
2018 if (uap->node == NULL)
2019 return -ENODEV;
2020 #else
2021 if (uap->pdev == NULL)
2022 return -ENODEV;
2023 #endif
2024 port = &uap->port;
2025
2026 /*
2027 * Mark port as beeing a console
2028 */
2029 uap->flags |= PMACZILOG_FLAG_IS_CONS;
2030
2031 /*
2032 * Temporary fix for uart layer who didn't setup the spinlock yet
2033 */
2034 spin_lock_init(&port->lock);
2035
2036 /*
2037 * Enable the hardware
2038 */
2039 pwr_delay = __pmz_startup(uap);
2040 if (pwr_delay)
2041 mdelay(pwr_delay);
2042
2043 if (options)
2044 uart_parse_options(options, &baud, &parity, &bits, &flow);
2045
2046 return uart_set_options(port, co, baud, parity, bits, flow);
2047 }
2048
2049 static int __init pmz_console_init(void)
2050 {
2051 /* Probe ports */
2052 pmz_probe();
2053
2054 if (pmz_ports_count == 0)
2055 return -ENODEV;
2056
2057 /* TODO: Autoprobe console based on OF */
2058 /* pmz_console.index = i; */
2059 register_console(&pmz_console);
2060
2061 return 0;
2062
2063 }
2064 console_initcall(pmz_console_init);
2065 #endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */
2066
2067 module_init(init_pmz);
2068 module_exit(exit_pmz);
Linux with added FPC-III support