?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Linux 3.4.102
[linux/fpc-iii.git] / drivers / tty / serial / sh-sci.c
blob3158e17b665cc6fb1c5eb214674610bd42611235
1 /*
2 * SuperH on-chip serial module support. (SCI with no FIFO / with FIFO)
3 *
4 * Copyright (C) 2002 - 2011 Paul Mundt
5 * Modified to support SH7720 SCIF. Markus Brunner, Mark Jonas (Jul 2007).
6 *
7 * based off of the old drivers/char/sh-sci.c by:
8 *
9 * Copyright (C) 1999, 2000 Niibe Yutaka
10 * Copyright (C) 2000 Sugioka Toshinobu
11 * Modified to support multiple serial ports. Stuart Menefy (May 2000).
12 * Modified to support SecureEdge. David McCullough (2002)
13 * Modified to support SH7300 SCIF. Takashi Kusuda (Jun 2003).
14 * Removed SH7300 support (Jul 2007).
15 *
16 * This file is subject to the terms and conditions of the GNU General Public
17 * License. See the file "COPYING" in the main directory of this archive
18 * for more details.
19 */
20 #if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
21 #define SUPPORT_SYSRQ
22 #endif
23
24 #undef DEBUG
25
26 #include <linux/module.h>
27 #include <linux/errno.h>
28 #include <linux/timer.h>
29 #include <linux/interrupt.h>
30 #include <linux/tty.h>
31 #include <linux/tty_flip.h>
32 #include <linux/serial.h>
33 #include <linux/major.h>
34 #include <linux/string.h>
35 #include <linux/sysrq.h>
36 #include <linux/ioport.h>
37 #include <linux/mm.h>
38 #include <linux/init.h>
39 #include <linux/delay.h>
40 #include <linux/console.h>
41 #include <linux/platform_device.h>
42 #include <linux/serial_sci.h>
43 #include <linux/notifier.h>
44 #include <linux/pm_runtime.h>
45 #include <linux/cpufreq.h>
46 #include <linux/clk.h>
47 #include <linux/ctype.h>
48 #include <linux/err.h>
49 #include <linux/dmaengine.h>
50 #include <linux/dma-mapping.h>
51 #include <linux/scatterlist.h>
52 #include <linux/slab.h>
53 #include <linux/gpio.h>
54
55 #ifdef CONFIG_SUPERH
56 #include <asm/sh_bios.h>
57 #endif
58
59 #include "sh-sci.h"
60
61 struct sci_port {
62 struct uart_port port;
63
64 /* Platform configuration */
65 struct plat_sci_port *cfg;
66
67 /* Break timer */
68 struct timer_list break_timer;
69 int break_flag;
70
71 /* Interface clock */
72 struct clk *iclk;
73 /* Function clock */
74 struct clk *fclk;
75
76 char *irqstr[SCIx_NR_IRQS];
77 char *gpiostr[SCIx_NR_FNS];
78
79 struct dma_chan *chan_tx;
80 struct dma_chan *chan_rx;
81
82 #ifdef CONFIG_SERIAL_SH_SCI_DMA
83 struct dma_async_tx_descriptor *desc_tx;
84 struct dma_async_tx_descriptor *desc_rx[2];
85 dma_cookie_t cookie_tx;
86 dma_cookie_t cookie_rx[2];
87 dma_cookie_t active_rx;
88 struct scatterlist sg_tx;
89 unsigned int sg_len_tx;
90 struct scatterlist sg_rx[2];
91 size_t buf_len_rx;
92 struct sh_dmae_slave param_tx;
93 struct sh_dmae_slave param_rx;
94 struct work_struct work_tx;
95 struct work_struct work_rx;
96 struct timer_list rx_timer;
97 unsigned int rx_timeout;
98 #endif
99
100 struct notifier_block freq_transition;
101
102 #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
103 unsigned short saved_smr;
104 unsigned short saved_fcr;
105 unsigned char saved_brr;
106 #endif
107 };
108
109 /* Function prototypes */
110 static void sci_start_tx(struct uart_port *port);
111 static void sci_stop_tx(struct uart_port *port);
112 static void sci_start_rx(struct uart_port *port);
113
114 #define SCI_NPORTS CONFIG_SERIAL_SH_SCI_NR_UARTS
115
116 static struct sci_port sci_ports[SCI_NPORTS];
117 static struct uart_driver sci_uart_driver;
118
119 static inline struct sci_port *
120 to_sci_port(struct uart_port *uart)
121 {
122 return container_of(uart, struct sci_port, port);
123 }
124
125 struct plat_sci_reg {
126 u8 offset, size;
127 };
128
129 /* Helper for invalidating specific entries of an inherited map. */
130 #define sci_reg_invalid { .offset = 0, .size = 0 }
131
132 static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
133 [SCIx_PROBE_REGTYPE] = {
134 [0 ... SCIx_NR_REGS - 1] = sci_reg_invalid,
135 },
136
137 /*
138 * Common SCI definitions, dependent on the port's regshift
139 * value.
140 */
141 [SCIx_SCI_REGTYPE] = {
142 [SCSMR] = { 0x00, 8 },
143 [SCBRR] = { 0x01, 8 },
144 [SCSCR] = { 0x02, 8 },
145 [SCxTDR] = { 0x03, 8 },
146 [SCxSR] = { 0x04, 8 },
147 [SCxRDR] = { 0x05, 8 },
148 [SCFCR] = sci_reg_invalid,
149 [SCFDR] = sci_reg_invalid,
150 [SCTFDR] = sci_reg_invalid,
151 [SCRFDR] = sci_reg_invalid,
152 [SCSPTR] = sci_reg_invalid,
153 [SCLSR] = sci_reg_invalid,
154 },
155
156 /*
157 * Common definitions for legacy IrDA ports, dependent on
158 * regshift value.
159 */
160 [SCIx_IRDA_REGTYPE] = {
161 [SCSMR] = { 0x00, 8 },
162 [SCBRR] = { 0x01, 8 },
163 [SCSCR] = { 0x02, 8 },
164 [SCxTDR] = { 0x03, 8 },
165 [SCxSR] = { 0x04, 8 },
166 [SCxRDR] = { 0x05, 8 },
167 [SCFCR] = { 0x06, 8 },
168 [SCFDR] = { 0x07, 16 },
169 [SCTFDR] = sci_reg_invalid,
170 [SCRFDR] = sci_reg_invalid,
171 [SCSPTR] = sci_reg_invalid,
172 [SCLSR] = sci_reg_invalid,
173 },
174
175 /*
176 * Common SCIFA definitions.
177 */
178 [SCIx_SCIFA_REGTYPE] = {
179 [SCSMR] = { 0x00, 16 },
180 [SCBRR] = { 0x04, 8 },
181 [SCSCR] = { 0x08, 16 },
182 [SCxTDR] = { 0x20, 8 },
183 [SCxSR] = { 0x14, 16 },
184 [SCxRDR] = { 0x24, 8 },
185 [SCFCR] = { 0x18, 16 },
186 [SCFDR] = { 0x1c, 16 },
187 [SCTFDR] = sci_reg_invalid,
188 [SCRFDR] = sci_reg_invalid,
189 [SCSPTR] = sci_reg_invalid,
190 [SCLSR] = sci_reg_invalid,
191 },
192
193 /*
194 * Common SCIFB definitions.
195 */
196 [SCIx_SCIFB_REGTYPE] = {
197 [SCSMR] = { 0x00, 16 },
198 [SCBRR] = { 0x04, 8 },
199 [SCSCR] = { 0x08, 16 },
200 [SCxTDR] = { 0x40, 8 },
201 [SCxSR] = { 0x14, 16 },
202 [SCxRDR] = { 0x60, 8 },
203 [SCFCR] = { 0x18, 16 },
204 [SCFDR] = { 0x1c, 16 },
205 [SCTFDR] = sci_reg_invalid,
206 [SCRFDR] = sci_reg_invalid,
207 [SCSPTR] = sci_reg_invalid,
208 [SCLSR] = sci_reg_invalid,
209 },
210
211 /*
212 * Common SH-2(A) SCIF definitions for ports with FIFO data
213 * count registers.
214 */
215 [SCIx_SH2_SCIF_FIFODATA_REGTYPE] = {
216 [SCSMR] = { 0x00, 16 },
217 [SCBRR] = { 0x04, 8 },
218 [SCSCR] = { 0x08, 16 },
219 [SCxTDR] = { 0x0c, 8 },
220 [SCxSR] = { 0x10, 16 },
221 [SCxRDR] = { 0x14, 8 },
222 [SCFCR] = { 0x18, 16 },
223 [SCFDR] = { 0x1c, 16 },
224 [SCTFDR] = sci_reg_invalid,
225 [SCRFDR] = sci_reg_invalid,
226 [SCSPTR] = { 0x20, 16 },
227 [SCLSR] = { 0x24, 16 },
228 },
229
230 /*
231 * Common SH-3 SCIF definitions.
232 */
233 [SCIx_SH3_SCIF_REGTYPE] = {
234 [SCSMR] = { 0x00, 8 },
235 [SCBRR] = { 0x02, 8 },
236 [SCSCR] = { 0x04, 8 },
237 [SCxTDR] = { 0x06, 8 },
238 [SCxSR] = { 0x08, 16 },
239 [SCxRDR] = { 0x0a, 8 },
240 [SCFCR] = { 0x0c, 8 },
241 [SCFDR] = { 0x0e, 16 },
242 [SCTFDR] = sci_reg_invalid,
243 [SCRFDR] = sci_reg_invalid,
244 [SCSPTR] = sci_reg_invalid,
245 [SCLSR] = sci_reg_invalid,
246 },
247
248 /*
249 * Common SH-4(A) SCIF(B) definitions.
250 */
251 [SCIx_SH4_SCIF_REGTYPE] = {
252 [SCSMR] = { 0x00, 16 },
253 [SCBRR] = { 0x04, 8 },
254 [SCSCR] = { 0x08, 16 },
255 [SCxTDR] = { 0x0c, 8 },
256 [SCxSR] = { 0x10, 16 },
257 [SCxRDR] = { 0x14, 8 },
258 [SCFCR] = { 0x18, 16 },
259 [SCFDR] = { 0x1c, 16 },
260 [SCTFDR] = sci_reg_invalid,
261 [SCRFDR] = sci_reg_invalid,
262 [SCSPTR] = { 0x20, 16 },
263 [SCLSR] = { 0x24, 16 },
264 },
265
266 /*
267 * Common SH-4(A) SCIF(B) definitions for ports without an SCSPTR
268 * register.
269 */
270 [SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE] = {
271 [SCSMR] = { 0x00, 16 },
272 [SCBRR] = { 0x04, 8 },
273 [SCSCR] = { 0x08, 16 },
274 [SCxTDR] = { 0x0c, 8 },
275 [SCxSR] = { 0x10, 16 },
276 [SCxRDR] = { 0x14, 8 },
277 [SCFCR] = { 0x18, 16 },
278 [SCFDR] = { 0x1c, 16 },
279 [SCTFDR] = sci_reg_invalid,
280 [SCRFDR] = sci_reg_invalid,
281 [SCSPTR] = sci_reg_invalid,
282 [SCLSR] = { 0x24, 16 },
283 },
284
285 /*
286 * Common SH-4(A) SCIF(B) definitions for ports with FIFO data
287 * count registers.
288 */
289 [SCIx_SH4_SCIF_FIFODATA_REGTYPE] = {
290 [SCSMR] = { 0x00, 16 },
291 [SCBRR] = { 0x04, 8 },
292 [SCSCR] = { 0x08, 16 },
293 [SCxTDR] = { 0x0c, 8 },
294 [SCxSR] = { 0x10, 16 },
295 [SCxRDR] = { 0x14, 8 },
296 [SCFCR] = { 0x18, 16 },
297 [SCFDR] = { 0x1c, 16 },
298 [SCTFDR] = { 0x1c, 16 }, /* aliased to SCFDR */
299 [SCRFDR] = { 0x20, 16 },
300 [SCSPTR] = { 0x24, 16 },
301 [SCLSR] = { 0x28, 16 },
302 },
303
304 /*
305 * SH7705-style SCIF(B) ports, lacking both SCSPTR and SCLSR
306 * registers.
307 */
308 [SCIx_SH7705_SCIF_REGTYPE] = {
309 [SCSMR] = { 0x00, 16 },
310 [SCBRR] = { 0x04, 8 },
311 [SCSCR] = { 0x08, 16 },
312 [SCxTDR] = { 0x20, 8 },
313 [SCxSR] = { 0x14, 16 },
314 [SCxRDR] = { 0x24, 8 },
315 [SCFCR] = { 0x18, 16 },
316 [SCFDR] = { 0x1c, 16 },
317 [SCTFDR] = sci_reg_invalid,
318 [SCRFDR] = sci_reg_invalid,
319 [SCSPTR] = sci_reg_invalid,
320 [SCLSR] = sci_reg_invalid,
321 },
322 };
323
324 #define sci_getreg(up, offset) (sci_regmap[to_sci_port(up)->cfg->regtype] + offset)
325
326 /*
327 * The "offset" here is rather misleading, in that it refers to an enum
328 * value relative to the port mapping rather than the fixed offset
329 * itself, which needs to be manually retrieved from the platform's
330 * register map for the given port.
331 */
332 static unsigned int sci_serial_in(struct uart_port *p, int offset)
333 {
334 struct plat_sci_reg *reg = sci_getreg(p, offset);
335
336 if (reg->size == 8)
337 return ioread8(p->membase + (reg->offset << p->regshift));
338 else if (reg->size == 16)
339 return ioread16(p->membase + (reg->offset << p->regshift));
340 else
341 WARN(1, "Invalid register access\n");
342
343 return 0;
344 }
345
346 static void sci_serial_out(struct uart_port *p, int offset, int value)
347 {
348 struct plat_sci_reg *reg = sci_getreg(p, offset);
349
350 if (reg->size == 8)
351 iowrite8(value, p->membase + (reg->offset << p->regshift));
352 else if (reg->size == 16)
353 iowrite16(value, p->membase + (reg->offset << p->regshift));
354 else
355 WARN(1, "Invalid register access\n");
356 }
357
358 static int sci_probe_regmap(struct plat_sci_port *cfg)
359 {
360 switch (cfg->type) {
361 case PORT_SCI:
362 cfg->regtype = SCIx_SCI_REGTYPE;
363 break;
364 case PORT_IRDA:
365 cfg->regtype = SCIx_IRDA_REGTYPE;
366 break;
367 case PORT_SCIFA:
368 cfg->regtype = SCIx_SCIFA_REGTYPE;
369 break;
370 case PORT_SCIFB:
371 cfg->regtype = SCIx_SCIFB_REGTYPE;
372 break;
373 case PORT_SCIF:
374 /*
375 * The SH-4 is a bit of a misnomer here, although that's
376 * where this particular port layout originated. This
377 * configuration (or some slight variation thereof)
378 * remains the dominant model for all SCIFs.
379 */
380 cfg->regtype = SCIx_SH4_SCIF_REGTYPE;
381 break;
382 default:
383 printk(KERN_ERR "Can't probe register map for given port\n");
384 return -EINVAL;
385 }
386
387 return 0;
388 }
389
390 static void sci_port_enable(struct sci_port *sci_port)
391 {
392 if (!sci_port->port.dev)
393 return;
394
395 pm_runtime_get_sync(sci_port->port.dev);
396
397 clk_enable(sci_port->iclk);
398 sci_port->port.uartclk = clk_get_rate(sci_port->iclk);
399 clk_enable(sci_port->fclk);
400 }
401
402 static void sci_port_disable(struct sci_port *sci_port)
403 {
404 if (!sci_port->port.dev)
405 return;
406
407 clk_disable(sci_port->fclk);
408 clk_disable(sci_port->iclk);
409
410 pm_runtime_put_sync(sci_port->port.dev);
411 }
412
413 #if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
414
415 #ifdef CONFIG_CONSOLE_POLL
416 static int sci_poll_get_char(struct uart_port *port)
417 {
418 unsigned short status;
419 int c;
420
421 do {
422 status = serial_port_in(port, SCxSR);
423 if (status & SCxSR_ERRORS(port)) {
424 serial_port_out(port, SCxSR, SCxSR_ERROR_CLEAR(port));
425 continue;
426 }
427 break;
428 } while (1);
429
430 if (!(status & SCxSR_RDxF(port)))
431 return NO_POLL_CHAR;
432
433 c = serial_port_in(port, SCxRDR);
434
435 /* Dummy read */
436 serial_port_in(port, SCxSR);
437 serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
438
439 return c;
440 }
441 #endif
442
443 static void sci_poll_put_char(struct uart_port *port, unsigned char c)
444 {
445 unsigned short status;
446
447 do {
448 status = serial_port_in(port, SCxSR);
449 } while (!(status & SCxSR_TDxE(port)));
450
451 serial_port_out(port, SCxTDR, c);
452 serial_port_out(port, SCxSR, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port));
453 }
454 #endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */
455
456 static void sci_init_pins(struct uart_port *port, unsigned int cflag)
457 {
458 struct sci_port *s = to_sci_port(port);
459 struct plat_sci_reg *reg = sci_regmap[s->cfg->regtype] + SCSPTR;
460
461 /*
462 * Use port-specific handler if provided.
463 */
464 if (s->cfg->ops && s->cfg->ops->init_pins) {
465 s->cfg->ops->init_pins(port, cflag);
466 return;
467 }
468
469 /*
470 * For the generic path SCSPTR is necessary. Bail out if that's
471 * unavailable, too.
472 */
473 if (!reg->size)
474 return;
475
476 if ((s->cfg->capabilities & SCIx_HAVE_RTSCTS) &&
477 ((!(cflag & CRTSCTS)))) {
478 unsigned short status;
479
480 status = serial_port_in(port, SCSPTR);
481 status &= ~SCSPTR_CTSIO;
482 status |= SCSPTR_RTSIO;
483 serial_port_out(port, SCSPTR, status); /* Set RTS = 1 */
484 }
485 }
486
487 static int sci_txfill(struct uart_port *port)
488 {
489 struct plat_sci_reg *reg;
490
491 reg = sci_getreg(port, SCTFDR);
492 if (reg->size)
493 return serial_port_in(port, SCTFDR) & 0xff;
494
495 reg = sci_getreg(port, SCFDR);
496 if (reg->size)
497 return serial_port_in(port, SCFDR) >> 8;
498
499 return !(serial_port_in(port, SCxSR) & SCI_TDRE);
500 }
501
502 static int sci_txroom(struct uart_port *port)
503 {
504 return port->fifosize - sci_txfill(port);
505 }
506
507 static int sci_rxfill(struct uart_port *port)
508 {
509 struct plat_sci_reg *reg;
510
511 reg = sci_getreg(port, SCRFDR);
512 if (reg->size)
513 return serial_port_in(port, SCRFDR) & 0xff;
514
515 reg = sci_getreg(port, SCFDR);
516 if (reg->size)
517 return serial_port_in(port, SCFDR) & ((port->fifosize << 1) - 1);
518
519 return (serial_port_in(port, SCxSR) & SCxSR_RDxF(port)) != 0;
520 }
521
522 /*
523 * SCI helper for checking the state of the muxed port/RXD pins.
524 */
525 static inline int sci_rxd_in(struct uart_port *port)
526 {
527 struct sci_port *s = to_sci_port(port);
528
529 if (s->cfg->port_reg <= 0)
530 return 1;
531
532 return !!__raw_readb(s->cfg->port_reg);
533 }
534
535 /* ********************************************************************** *
536 * the interrupt related routines *
537 * ********************************************************************** */
538
539 static void sci_transmit_chars(struct uart_port *port)
540 {
541 struct circ_buf *xmit = &port->state->xmit;
542 unsigned int stopped = uart_tx_stopped(port);
543 unsigned short status;
544 unsigned short ctrl;
545 int count;
546
547 status = serial_port_in(port, SCxSR);
548 if (!(status & SCxSR_TDxE(port))) {
549 ctrl = serial_port_in(port, SCSCR);
550 if (uart_circ_empty(xmit))
551 ctrl &= ~SCSCR_TIE;
552 else
553 ctrl |= SCSCR_TIE;
554 serial_port_out(port, SCSCR, ctrl);
555 return;
556 }
557
558 count = sci_txroom(port);
559
560 do {
561 unsigned char c;
562
563 if (port->x_char) {
564 c = port->x_char;
565 port->x_char = 0;
566 } else if (!uart_circ_empty(xmit) && !stopped) {
567 c = xmit->buf[xmit->tail];
568 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
569 } else {
570 break;
571 }
572
573 serial_port_out(port, SCxTDR, c);
574
575 port->icount.tx++;
576 } while (--count > 0);
577
578 serial_port_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
579
580 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
581 uart_write_wakeup(port);
582 if (uart_circ_empty(xmit)) {
583 sci_stop_tx(port);
584 } else {
585 ctrl = serial_port_in(port, SCSCR);
586
587 if (port->type != PORT_SCI) {
588 serial_port_in(port, SCxSR); /* Dummy read */
589 serial_port_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
590 }
591
592 ctrl |= SCSCR_TIE;
593 serial_port_out(port, SCSCR, ctrl);
594 }
595 }
596
597 /* On SH3, SCIF may read end-of-break as a space->mark char */
598 #define STEPFN(c) ({int __c = (c); (((__c-1)|(__c)) == -1); })
599
600 static void sci_receive_chars(struct uart_port *port)
601 {
602 struct sci_port *sci_port = to_sci_port(port);
603 struct tty_struct *tty = port->state->port.tty;
604 int i, count, copied = 0;
605 unsigned short status;
606 unsigned char flag;
607
608 status = serial_port_in(port, SCxSR);
609 if (!(status & SCxSR_RDxF(port)))
610 return;
611
612 while (1) {
613 /* Don't copy more bytes than there is room for in the buffer */
614 count = tty_buffer_request_room(tty, sci_rxfill(port));
615
616 /* If for any reason we can't copy more data, we're done! */
617 if (count == 0)
618 break;
619
620 if (port->type == PORT_SCI) {
621 char c = serial_port_in(port, SCxRDR);
622 if (uart_handle_sysrq_char(port, c) ||
623 sci_port->break_flag)
624 count = 0;
625 else
626 tty_insert_flip_char(tty, c, TTY_NORMAL);
627 } else {
628 for (i = 0; i < count; i++) {
629 char c = serial_port_in(port, SCxRDR);
630
631 status = serial_port_in(port, SCxSR);
632 #if defined(CONFIG_CPU_SH3)
633 /* Skip "chars" during break */
634 if (sci_port->break_flag) {
635 if ((c == 0) &&
636 (status & SCxSR_FER(port))) {
637 count--; i--;
638 continue;
639 }
640
641 /* Nonzero => end-of-break */
642 dev_dbg(port->dev, "debounce<%02x>\n", c);
643 sci_port->break_flag = 0;
644
645 if (STEPFN(c)) {
646 count--; i--;
647 continue;
648 }
649 }
650 #endif /* CONFIG_CPU_SH3 */
651 if (uart_handle_sysrq_char(port, c)) {
652 count--; i--;
653 continue;
654 }
655
656 /* Store data and status */
657 if (status & SCxSR_FER(port)) {
658 flag = TTY_FRAME;
659 port->icount.frame++;
660 dev_notice(port->dev, "frame error\n");
661 } else if (status & SCxSR_PER(port)) {
662 flag = TTY_PARITY;
663 port->icount.parity++;
664 dev_notice(port->dev, "parity error\n");
665 } else
666 flag = TTY_NORMAL;
667
668 tty_insert_flip_char(tty, c, flag);
669 }
670 }
671
672 serial_port_in(port, SCxSR); /* dummy read */
673 serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
674
675 copied += count;
676 port->icount.rx += count;
677 }
678
679 if (copied) {
680 /* Tell the rest of the system the news. New characters! */
681 tty_flip_buffer_push(tty);
682 } else {
683 serial_port_in(port, SCxSR); /* dummy read */
684 serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
685 }
686 }
687
688 #define SCI_BREAK_JIFFIES (HZ/20)
689
690 /*
691 * The sci generates interrupts during the break,
692 * 1 per millisecond or so during the break period, for 9600 baud.
693 * So dont bother disabling interrupts.
694 * But dont want more than 1 break event.
695 * Use a kernel timer to periodically poll the rx line until
696 * the break is finished.
697 */
698 static inline void sci_schedule_break_timer(struct sci_port *port)
699 {
700 mod_timer(&port->break_timer, jiffies + SCI_BREAK_JIFFIES);
701 }
702
703 /* Ensure that two consecutive samples find the break over. */
704 static void sci_break_timer(unsigned long data)
705 {
706 struct sci_port *port = (struct sci_port *)data;
707
708 sci_port_enable(port);
709
710 if (sci_rxd_in(&port->port) == 0) {
711 port->break_flag = 1;
712 sci_schedule_break_timer(port);
713 } else if (port->break_flag == 1) {
714 /* break is over. */
715 port->break_flag = 2;
716 sci_schedule_break_timer(port);
717 } else
718 port->break_flag = 0;
719
720 sci_port_disable(port);
721 }
722
723 static int sci_handle_errors(struct uart_port *port)
724 {
725 int copied = 0;
726 unsigned short status = serial_port_in(port, SCxSR);
727 struct tty_struct *tty = port->state->port.tty;
728 struct sci_port *s = to_sci_port(port);
729
730 /*
731 * Handle overruns, if supported.
732 */
733 if (s->cfg->overrun_bit != SCIx_NOT_SUPPORTED) {
734 if (status & (1 << s->cfg->overrun_bit)) {
735 port->icount.overrun++;
736
737 /* overrun error */
738 if (tty_insert_flip_char(tty, 0, TTY_OVERRUN))
739 copied++;
740
741 dev_notice(port->dev, "overrun error");
742 }
743 }
744
745 if (status & SCxSR_FER(port)) {
746 if (sci_rxd_in(port) == 0) {
747 /* Notify of BREAK */
748 struct sci_port *sci_port = to_sci_port(port);
749
750 if (!sci_port->break_flag) {
751 port->icount.brk++;
752
753 sci_port->break_flag = 1;
754 sci_schedule_break_timer(sci_port);
755
756 /* Do sysrq handling. */
757 if (uart_handle_break(port))
758 return 0;
759
760 dev_dbg(port->dev, "BREAK detected\n");
761
762 if (tty_insert_flip_char(tty, 0, TTY_BREAK))
763 copied++;
764 }
765
766 } else {
767 /* frame error */
768 port->icount.frame++;
769
770 if (tty_insert_flip_char(tty, 0, TTY_FRAME))
771 copied++;
772
773 dev_notice(port->dev, "frame error\n");
774 }
775 }
776
777 if (status & SCxSR_PER(port)) {
778 /* parity error */
779 port->icount.parity++;
780
781 if (tty_insert_flip_char(tty, 0, TTY_PARITY))
782 copied++;
783
784 dev_notice(port->dev, "parity error");
785 }
786
787 if (copied)
788 tty_flip_buffer_push(tty);
789
790 return copied;
791 }
792
793 static int sci_handle_fifo_overrun(struct uart_port *port)
794 {
795 struct tty_struct *tty = port->state->port.tty;
796 struct sci_port *s = to_sci_port(port);
797 struct plat_sci_reg *reg;
798 int copied = 0;
799
800 reg = sci_getreg(port, SCLSR);
801 if (!reg->size)
802 return 0;
803
804 if ((serial_port_in(port, SCLSR) & (1 << s->cfg->overrun_bit))) {
805 serial_port_out(port, SCLSR, 0);
806
807 port->icount.overrun++;
808
809 tty_insert_flip_char(tty, 0, TTY_OVERRUN);
810 tty_flip_buffer_push(tty);
811
812 dev_notice(port->dev, "overrun error\n");
813 copied++;
814 }
815
816 return copied;
817 }
818
819 static int sci_handle_breaks(struct uart_port *port)
820 {
821 int copied = 0;
822 unsigned short status = serial_port_in(port, SCxSR);
823 struct tty_struct *tty = port->state->port.tty;
824 struct sci_port *s = to_sci_port(port);
825
826 if (uart_handle_break(port))
827 return 0;
828
829 if (!s->break_flag && status & SCxSR_BRK(port)) {
830 #if defined(CONFIG_CPU_SH3)
831 /* Debounce break */
832 s->break_flag = 1;
833 #endif
834
835 port->icount.brk++;
836
837 /* Notify of BREAK */
838 if (tty_insert_flip_char(tty, 0, TTY_BREAK))
839 copied++;
840
841 dev_dbg(port->dev, "BREAK detected\n");
842 }
843
844 if (copied)
845 tty_flip_buffer_push(tty);
846
847 copied += sci_handle_fifo_overrun(port);
848
849 return copied;
850 }
851
852 static irqreturn_t sci_rx_interrupt(int irq, void *ptr)
853 {
854 #ifdef CONFIG_SERIAL_SH_SCI_DMA
855 struct uart_port *port = ptr;
856 struct sci_port *s = to_sci_port(port);
857
858 if (s->chan_rx) {
859 u16 scr = serial_port_in(port, SCSCR);
860 u16 ssr = serial_port_in(port, SCxSR);
861
862 /* Disable future Rx interrupts */
863 if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
864 disable_irq_nosync(irq);
865 scr |= 0x4000;
866 } else {
867 scr &= ~SCSCR_RIE;
868 }
869 serial_port_out(port, SCSCR, scr);
870 /* Clear current interrupt */
871 serial_port_out(port, SCxSR, ssr & ~(1 | SCxSR_RDxF(port)));
872 dev_dbg(port->dev, "Rx IRQ %lu: setup t-out in %u jiffies\n",
873 jiffies, s->rx_timeout);
874 mod_timer(&s->rx_timer, jiffies + s->rx_timeout);
875
876 return IRQ_HANDLED;
877 }
878 #endif
879
880 /* I think sci_receive_chars has to be called irrespective
881 * of whether the I_IXOFF is set, otherwise, how is the interrupt
882 * to be disabled?
883 */
884 sci_receive_chars(ptr);
885
886 return IRQ_HANDLED;
887 }
888
889 static irqreturn_t sci_tx_interrupt(int irq, void *ptr)
890 {
891 struct uart_port *port = ptr;
892 unsigned long flags;
893
894 spin_lock_irqsave(&port->lock, flags);
895 sci_transmit_chars(port);
896 spin_unlock_irqrestore(&port->lock, flags);
897
898 return IRQ_HANDLED;
899 }
900
901 static irqreturn_t sci_er_interrupt(int irq, void *ptr)
902 {
903 struct uart_port *port = ptr;
904
905 /* Handle errors */
906 if (port->type == PORT_SCI) {
907 if (sci_handle_errors(port)) {
908 /* discard character in rx buffer */
909 serial_port_in(port, SCxSR);
910 serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
911 }
912 } else {
913 sci_handle_fifo_overrun(port);
914 sci_rx_interrupt(irq, ptr);
915 }
916
917 serial_port_out(port, SCxSR, SCxSR_ERROR_CLEAR(port));
918
919 /* Kick the transmission */
920 sci_tx_interrupt(irq, ptr);
921
922 return IRQ_HANDLED;
923 }
924
925 static irqreturn_t sci_br_interrupt(int irq, void *ptr)
926 {
927 struct uart_port *port = ptr;
928
929 /* Handle BREAKs */
930 sci_handle_breaks(port);
931 serial_port_out(port, SCxSR, SCxSR_BREAK_CLEAR(port));
932
933 return IRQ_HANDLED;
934 }
935
936 static inline unsigned long port_rx_irq_mask(struct uart_port *port)
937 {
938 /*
939 * Not all ports (such as SCIFA) will support REIE. Rather than
940 * special-casing the port type, we check the port initialization
941 * IRQ enable mask to see whether the IRQ is desired at all. If
942 * it's unset, it's logically inferred that there's no point in
943 * testing for it.
944 */
945 return SCSCR_RIE | (to_sci_port(port)->cfg->scscr & SCSCR_REIE);
946 }
947
948 static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
949 {
950 unsigned short ssr_status, scr_status, err_enabled;
951 struct uart_port *port = ptr;
952 struct sci_port *s = to_sci_port(port);
953 irqreturn_t ret = IRQ_NONE;
954
955 ssr_status = serial_port_in(port, SCxSR);
956 scr_status = serial_port_in(port, SCSCR);
957 err_enabled = scr_status & port_rx_irq_mask(port);
958
959 /* Tx Interrupt */
960 if ((ssr_status & SCxSR_TDxE(port)) && (scr_status & SCSCR_TIE) &&
961 !s->chan_tx)
962 ret = sci_tx_interrupt(irq, ptr);
963
964 /*
965 * Rx Interrupt: if we're using DMA, the DMA controller clears RDF /
966 * DR flags
967 */
968 if (((ssr_status & SCxSR_RDxF(port)) || s->chan_rx) &&
969 (scr_status & SCSCR_RIE))
970 ret = sci_rx_interrupt(irq, ptr);
971
972 /* Error Interrupt */
973 if ((ssr_status & SCxSR_ERRORS(port)) && err_enabled)
974 ret = sci_er_interrupt(irq, ptr);
975
976 /* Break Interrupt */
977 if ((ssr_status & SCxSR_BRK(port)) && err_enabled)
978 ret = sci_br_interrupt(irq, ptr);
979
980 return ret;
981 }
982
983 /*
984 * Here we define a transition notifier so that we can update all of our
985 * ports' baud rate when the peripheral clock changes.
986 */
987 static int sci_notifier(struct notifier_block *self,
988 unsigned long phase, void *p)
989 {
990 struct sci_port *sci_port;
991 unsigned long flags;
992
993 sci_port = container_of(self, struct sci_port, freq_transition);
994
995 if ((phase == CPUFREQ_POSTCHANGE) ||
996 (phase == CPUFREQ_RESUMECHANGE)) {
997 struct uart_port *port = &sci_port->port;
998
999 spin_lock_irqsave(&port->lock, flags);
1000 port->uartclk = clk_get_rate(sci_port->iclk);
1001 spin_unlock_irqrestore(&port->lock, flags);
1002 }
1003
1004 return NOTIFY_OK;
1005 }
1006
1007 static struct sci_irq_desc {
1008 const char *desc;
1009 irq_handler_t handler;
1010 } sci_irq_desc[] = {
1011 /*
1012 * Split out handlers, the default case.
1013 */
1014 [SCIx_ERI_IRQ] = {
1015 .desc = "rx err",
1016 .handler = sci_er_interrupt,
1017 },
1018
1019 [SCIx_RXI_IRQ] = {
1020 .desc = "rx full",
1021 .handler = sci_rx_interrupt,
1022 },
1023
1024 [SCIx_TXI_IRQ] = {
1025 .desc = "tx empty",
1026 .handler = sci_tx_interrupt,
1027 },
1028
1029 [SCIx_BRI_IRQ] = {
1030 .desc = "break",
1031 .handler = sci_br_interrupt,
1032 },
1033
1034 /*
1035 * Special muxed handler.
1036 */
1037 [SCIx_MUX_IRQ] = {
1038 .desc = "mux",
1039 .handler = sci_mpxed_interrupt,
1040 },
1041 };
1042
1043 static int sci_request_irq(struct sci_port *port)
1044 {
1045 struct uart_port *up = &port->port;
1046 int i, j, ret = 0;
1047
1048 for (i = j = 0; i < SCIx_NR_IRQS; i++, j++) {
1049 struct sci_irq_desc *desc;
1050 unsigned int irq;
1051
1052 if (SCIx_IRQ_IS_MUXED(port)) {
1053 i = SCIx_MUX_IRQ;
1054 irq = up->irq;
1055 } else
1056 irq = port->cfg->irqs[i];
1057
1058 desc = sci_irq_desc + i;
1059 port->irqstr[j] = kasprintf(GFP_KERNEL, "%s:%s",
1060 dev_name(up->dev), desc->desc);
1061 if (!port->irqstr[j]) {
1062 dev_err(up->dev, "Failed to allocate %s IRQ string\n",
1063 desc->desc);
1064 goto out_nomem;
1065 }
1066
1067 ret = request_irq(irq, desc->handler, up->irqflags,
1068 port->irqstr[j], port);
1069 if (unlikely(ret)) {
1070 dev_err(up->dev, "Can't allocate %s IRQ\n", desc->desc);
1071 goto out_noirq;
1072 }
1073 }
1074
1075 return 0;
1076
1077 out_noirq:
1078 while (--i >= 0)
1079 free_irq(port->cfg->irqs[i], port);
1080
1081 out_nomem:
1082 while (--j >= 0)
1083 kfree(port->irqstr[j]);
1084
1085 return ret;
1086 }
1087
1088 static void sci_free_irq(struct sci_port *port)
1089 {
1090 int i;
1091
1092 /*
1093 * Intentionally in reverse order so we iterate over the muxed
1094 * IRQ first.
1095 */
1096 for (i = 0; i < SCIx_NR_IRQS; i++) {
1097 free_irq(port->cfg->irqs[i], port);
1098 kfree(port->irqstr[i]);
1099
1100 if (SCIx_IRQ_IS_MUXED(port)) {
1101 /* If there's only one IRQ, we're done. */
1102 return;
1103 }
1104 }
1105 }
1106
1107 static const char *sci_gpio_names[SCIx_NR_FNS] = {
1108 "sck", "rxd", "txd", "cts", "rts",
1109 };
1110
1111 static const char *sci_gpio_str(unsigned int index)
1112 {
1113 return sci_gpio_names[index];
1114 }
1115
1116 static void __devinit sci_init_gpios(struct sci_port *port)
1117 {
1118 struct uart_port *up = &port->port;
1119 int i;
1120
1121 if (!port->cfg)
1122 return;
1123
1124 for (i = 0; i < SCIx_NR_FNS; i++) {
1125 const char *desc;
1126 int ret;
1127
1128 if (!port->cfg->gpios[i])
1129 continue;
1130
1131 desc = sci_gpio_str(i);
1132
1133 port->gpiostr[i] = kasprintf(GFP_KERNEL, "%s:%s",
1134 dev_name(up->dev), desc);
1135
1136 /*
1137 * If we've failed the allocation, we can still continue
1138 * on with a NULL string.
1139 */
1140 if (!port->gpiostr[i])
1141 dev_notice(up->dev, "%s string allocation failure\n",
1142 desc);
1143
1144 ret = gpio_request(port->cfg->gpios[i], port->gpiostr[i]);
1145 if (unlikely(ret != 0)) {
1146 dev_notice(up->dev, "failed %s gpio request\n", desc);
1147
1148 /*
1149 * If we can't get the GPIO for whatever reason,
1150 * no point in keeping the verbose string around.
1151 */
1152 kfree(port->gpiostr[i]);
1153 }
1154 }
1155 }
1156
1157 static void sci_free_gpios(struct sci_port *port)
1158 {
1159 int i;
1160
1161 for (i = 0; i < SCIx_NR_FNS; i++)
1162 if (port->cfg->gpios[i]) {
1163 gpio_free(port->cfg->gpios[i]);
1164 kfree(port->gpiostr[i]);
1165 }
1166 }
1167
1168 static unsigned int sci_tx_empty(struct uart_port *port)
1169 {
1170 unsigned short status = serial_port_in(port, SCxSR);
1171 unsigned short in_tx_fifo = sci_txfill(port);
1172
1173 return (status & SCxSR_TEND(port)) && !in_tx_fifo ? TIOCSER_TEMT : 0;
1174 }
1175
1176 /*
1177 * Modem control is a bit of a mixed bag for SCI(F) ports. Generally
1178 * CTS/RTS is supported in hardware by at least one port and controlled
1179 * via SCSPTR (SCxPCR for SCIFA/B parts), or external pins (presently
1180 * handled via the ->init_pins() op, which is a bit of a one-way street,
1181 * lacking any ability to defer pin control -- this will later be
1182 * converted over to the GPIO framework).
1183 *
1184 * Other modes (such as loopback) are supported generically on certain
1185 * port types, but not others. For these it's sufficient to test for the
1186 * existence of the support register and simply ignore the port type.
1187 */
1188 static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl)
1189 {
1190 if (mctrl & TIOCM_LOOP) {
1191 struct plat_sci_reg *reg;
1192
1193 /*
1194 * Standard loopback mode for SCFCR ports.
1195 */
1196 reg = sci_getreg(port, SCFCR);
1197 if (reg->size)
1198 serial_port_out(port, SCFCR, serial_port_in(port, SCFCR) | 1);
1199 }
1200 }
1201
1202 static unsigned int sci_get_mctrl(struct uart_port *port)
1203 {
1204 /*
1205 * CTS/RTS is handled in hardware when supported, while nothing
1206 * else is wired up. Keep it simple and simply assert DSR/CAR.
1207 */
1208 return TIOCM_DSR | TIOCM_CAR;
1209 }
1210
1211 #ifdef CONFIG_SERIAL_SH_SCI_DMA
1212 static void sci_dma_tx_complete(void *arg)
1213 {
1214 struct sci_port *s = arg;
1215 struct uart_port *port = &s->port;
1216 struct circ_buf *xmit = &port->state->xmit;
1217 unsigned long flags;
1218
1219 dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
1220
1221 spin_lock_irqsave(&port->lock, flags);
1222
1223 xmit->tail += sg_dma_len(&s->sg_tx);
1224 xmit->tail &= UART_XMIT_SIZE - 1;
1225
1226 port->icount.tx += sg_dma_len(&s->sg_tx);
1227
1228 async_tx_ack(s->desc_tx);
1229 s->desc_tx = NULL;
1230
1231 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
1232 uart_write_wakeup(port);
1233
1234 if (!uart_circ_empty(xmit)) {
1235 s->cookie_tx = 0;
1236 schedule_work(&s->work_tx);
1237 } else {
1238 s->cookie_tx = -EINVAL;
1239 if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
1240 u16 ctrl = serial_port_in(port, SCSCR);
1241 serial_port_out(port, SCSCR, ctrl & ~SCSCR_TIE);
1242 }
1243 }
1244
1245 spin_unlock_irqrestore(&port->lock, flags);
1246 }
1247
1248 /* Locking: called with port lock held */
1249 static int sci_dma_rx_push(struct sci_port *s, struct tty_struct *tty,
1250 size_t count)
1251 {
1252 struct uart_port *port = &s->port;
1253 int i, active, room;
1254
1255 room = tty_buffer_request_room(tty, count);
1256
1257 if (s->active_rx == s->cookie_rx[0]) {
1258 active = 0;
1259 } else if (s->active_rx == s->cookie_rx[1]) {
1260 active = 1;
1261 } else {
1262 dev_err(port->dev, "cookie %d not found!\n", s->active_rx);
1263 return 0;
1264 }
1265
1266 if (room < count)
1267 dev_warn(port->dev, "Rx overrun: dropping %u bytes\n",
1268 count - room);
1269 if (!room)
1270 return room;
1271
1272 for (i = 0; i < room; i++)
1273 tty_insert_flip_char(tty, ((u8 *)sg_virt(&s->sg_rx[active]))[i],
1274 TTY_NORMAL);
1275
1276 port->icount.rx += room;
1277
1278 return room;
1279 }
1280
1281 static void sci_dma_rx_complete(void *arg)
1282 {
1283 struct sci_port *s = arg;
1284 struct uart_port *port = &s->port;
1285 struct tty_struct *tty = port->state->port.tty;
1286 unsigned long flags;
1287 int count;
1288
1289 dev_dbg(port->dev, "%s(%d) active #%d\n", __func__, port->line, s->active_rx);
1290
1291 spin_lock_irqsave(&port->lock, flags);
1292
1293 count = sci_dma_rx_push(s, tty, s->buf_len_rx);
1294
1295 mod_timer(&s->rx_timer, jiffies + s->rx_timeout);
1296
1297 spin_unlock_irqrestore(&port->lock, flags);
1298
1299 if (count)
1300 tty_flip_buffer_push(tty);
1301
1302 schedule_work(&s->work_rx);
1303 }
1304
1305 static void sci_rx_dma_release(struct sci_port *s, bool enable_pio)
1306 {
1307 struct dma_chan *chan = s->chan_rx;
1308 struct uart_port *port = &s->port;
1309
1310 s->chan_rx = NULL;
1311 s->cookie_rx[0] = s->cookie_rx[1] = -EINVAL;
1312 dma_release_channel(chan);
1313 if (sg_dma_address(&s->sg_rx[0]))
1314 dma_free_coherent(port->dev, s->buf_len_rx * 2,
1315 sg_virt(&s->sg_rx[0]), sg_dma_address(&s->sg_rx[0]));
1316 if (enable_pio)
1317 sci_start_rx(port);
1318 }
1319
1320 static void sci_tx_dma_release(struct sci_port *s, bool enable_pio)
1321 {
1322 struct dma_chan *chan = s->chan_tx;
1323 struct uart_port *port = &s->port;
1324
1325 s->chan_tx = NULL;
1326 s->cookie_tx = -EINVAL;
1327 dma_release_channel(chan);
1328 if (enable_pio)
1329 sci_start_tx(port);
1330 }
1331
1332 static void sci_submit_rx(struct sci_port *s)
1333 {
1334 struct dma_chan *chan = s->chan_rx;
1335 int i;
1336
1337 for (i = 0; i < 2; i++) {
1338 struct scatterlist *sg = &s->sg_rx[i];
1339 struct dma_async_tx_descriptor *desc;
1340
1341 desc = dmaengine_prep_slave_sg(chan,
1342 sg, 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT);
1343
1344 if (desc) {
1345 s->desc_rx[i] = desc;
1346 desc->callback = sci_dma_rx_complete;
1347 desc->callback_param = s;
1348 s->cookie_rx[i] = desc->tx_submit(desc);
1349 }
1350
1351 if (!desc || s->cookie_rx[i] < 0) {
1352 if (i) {
1353 async_tx_ack(s->desc_rx[0]);
1354 s->cookie_rx[0] = -EINVAL;
1355 }
1356 if (desc) {
1357 async_tx_ack(desc);
1358 s->cookie_rx[i] = -EINVAL;
1359 }
1360 dev_warn(s->port.dev,
1361 "failed to re-start DMA, using PIO\n");
1362 sci_rx_dma_release(s, true);
1363 return;
1364 }
1365 dev_dbg(s->port.dev, "%s(): cookie %d to #%d\n", __func__,
1366 s->cookie_rx[i], i);
1367 }
1368
1369 s->active_rx = s->cookie_rx[0];
1370
1371 dma_async_issue_pending(chan);
1372 }
1373
1374 static void work_fn_rx(struct work_struct *work)
1375 {
1376 struct sci_port *s = container_of(work, struct sci_port, work_rx);
1377 struct uart_port *port = &s->port;
1378 struct dma_async_tx_descriptor *desc;
1379 int new;
1380
1381 if (s->active_rx == s->cookie_rx[0]) {
1382 new = 0;
1383 } else if (s->active_rx == s->cookie_rx[1]) {
1384 new = 1;
1385 } else {
1386 dev_err(port->dev, "cookie %d not found!\n", s->active_rx);
1387 return;
1388 }
1389 desc = s->desc_rx[new];
1390
1391 if (dma_async_is_tx_complete(s->chan_rx, s->active_rx, NULL, NULL) !=
1392 DMA_SUCCESS) {
1393 /* Handle incomplete DMA receive */
1394 struct tty_struct *tty = port->state->port.tty;
1395 struct dma_chan *chan = s->chan_rx;
1396 struct sh_desc *sh_desc = container_of(desc, struct sh_desc,
1397 async_tx);
1398 unsigned long flags;
1399 int count;
1400
1401 chan->device->device_control(chan, DMA_TERMINATE_ALL, 0);
1402 dev_dbg(port->dev, "Read %u bytes with cookie %d\n",
1403 sh_desc->partial, sh_desc->cookie);
1404
1405 spin_lock_irqsave(&port->lock, flags);
1406 count = sci_dma_rx_push(s, tty, sh_desc->partial);
1407 spin_unlock_irqrestore(&port->lock, flags);
1408
1409 if (count)
1410 tty_flip_buffer_push(tty);
1411
1412 sci_submit_rx(s);
1413
1414 return;
1415 }
1416
1417 s->cookie_rx[new] = desc->tx_submit(desc);
1418 if (s->cookie_rx[new] < 0) {
1419 dev_warn(port->dev, "Failed submitting Rx DMA descriptor\n");
1420 sci_rx_dma_release(s, true);
1421 return;
1422 }
1423
1424 s->active_rx = s->cookie_rx[!new];
1425
1426 dev_dbg(port->dev, "%s: cookie %d #%d, new active #%d\n", __func__,
1427 s->cookie_rx[new], new, s->active_rx);
1428 }
1429
1430 static void work_fn_tx(struct work_struct *work)
1431 {
1432 struct sci_port *s = container_of(work, struct sci_port, work_tx);
1433 struct dma_async_tx_descriptor *desc;
1434 struct dma_chan *chan = s->chan_tx;
1435 struct uart_port *port = &s->port;
1436 struct circ_buf *xmit = &port->state->xmit;
1437 struct scatterlist *sg = &s->sg_tx;
1438
1439 /*
1440 * DMA is idle now.
1441 * Port xmit buffer is already mapped, and it is one page... Just adjust
1442 * offsets and lengths. Since it is a circular buffer, we have to
1443 * transmit till the end, and then the rest. Take the port lock to get a
1444 * consistent xmit buffer state.
1445 */
1446 spin_lock_irq(&port->lock);
1447 sg->offset = xmit->tail & (UART_XMIT_SIZE - 1);
1448 sg_dma_address(sg) = (sg_dma_address(sg) & ~(UART_XMIT_SIZE - 1)) +
1449 sg->offset;
1450 sg_dma_len(sg) = min((int)CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE),
1451 CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE));
1452 spin_unlock_irq(&port->lock);
1453
1454 BUG_ON(!sg_dma_len(sg));
1455
1456 desc = dmaengine_prep_slave_sg(chan,
1457 sg, s->sg_len_tx, DMA_MEM_TO_DEV,
1458 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
1459 if (!desc) {
1460 /* switch to PIO */
1461 sci_tx_dma_release(s, true);
1462 return;
1463 }
1464
1465 dma_sync_sg_for_device(port->dev, sg, 1, DMA_TO_DEVICE);
1466
1467 spin_lock_irq(&port->lock);
1468 s->desc_tx = desc;
1469 desc->callback = sci_dma_tx_complete;
1470 desc->callback_param = s;
1471 spin_unlock_irq(&port->lock);
1472 s->cookie_tx = desc->tx_submit(desc);
1473 if (s->cookie_tx < 0) {
1474 dev_warn(port->dev, "Failed submitting Tx DMA descriptor\n");
1475 /* switch to PIO */
1476 sci_tx_dma_release(s, true);
1477 return;
1478 }
1479
1480 dev_dbg(port->dev, "%s: %p: %d...%d, cookie %d\n", __func__,
1481 xmit->buf, xmit->tail, xmit->head, s->cookie_tx);
1482
1483 dma_async_issue_pending(chan);
1484 }
1485 #endif
1486
1487 static void sci_start_tx(struct uart_port *port)
1488 {
1489 struct sci_port *s = to_sci_port(port);
1490 unsigned short ctrl;
1491
1492 #ifdef CONFIG_SERIAL_SH_SCI_DMA
1493 if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
1494 u16 new, scr = serial_port_in(port, SCSCR);
1495 if (s->chan_tx)
1496 new = scr | 0x8000;
1497 else
1498 new = scr & ~0x8000;
1499 if (new != scr)
1500 serial_port_out(port, SCSCR, new);
1501 }
1502
1503 if (s->chan_tx && !uart_circ_empty(&s->port.state->xmit) &&
1504 s->cookie_tx < 0) {
1505 s->cookie_tx = 0;
1506 schedule_work(&s->work_tx);
1507 }
1508 #endif
1509
1510 if (!s->chan_tx || port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
1511 /* Set TIE (Transmit Interrupt Enable) bit in SCSCR */
1512 ctrl = serial_port_in(port, SCSCR);
1513 serial_port_out(port, SCSCR, ctrl | SCSCR_TIE);
1514 }
1515 }
1516
1517 static void sci_stop_tx(struct uart_port *port)
1518 {
1519 unsigned short ctrl;
1520
1521 /* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */
1522 ctrl = serial_port_in(port, SCSCR);
1523
1524 if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
1525 ctrl &= ~0x8000;
1526
1527 ctrl &= ~SCSCR_TIE;
1528
1529 serial_port_out(port, SCSCR, ctrl);
1530 }
1531
1532 static void sci_start_rx(struct uart_port *port)
1533 {
1534 unsigned short ctrl;
1535
1536 ctrl = serial_port_in(port, SCSCR) | port_rx_irq_mask(port);
1537
1538 if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
1539 ctrl &= ~0x4000;
1540
1541 serial_port_out(port, SCSCR, ctrl);
1542 }
1543
1544 static void sci_stop_rx(struct uart_port *port)
1545 {
1546 unsigned short ctrl;
1547
1548 ctrl = serial_port_in(port, SCSCR);
1549
1550 if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
1551 ctrl &= ~0x4000;
1552
1553 ctrl &= ~port_rx_irq_mask(port);
1554
1555 serial_port_out(port, SCSCR, ctrl);
1556 }
1557
1558 static void sci_enable_ms(struct uart_port *port)
1559 {
1560 /*
1561 * Not supported by hardware, always a nop.
1562 */
1563 }
1564
1565 static void sci_break_ctl(struct uart_port *port, int break_state)
1566 {
1567 /*
1568 * Not supported by hardware. Most parts couple break and rx
1569 * interrupts together, with break detection always enabled.
1570 */
1571 }
1572
1573 #ifdef CONFIG_SERIAL_SH_SCI_DMA
1574 static bool filter(struct dma_chan *chan, void *slave)
1575 {
1576 struct sh_dmae_slave *param = slave;
1577
1578 dev_dbg(chan->device->dev, "%s: slave ID %d\n", __func__,
1579 param->slave_id);
1580
1581 chan->private = param;
1582 return true;
1583 }
1584
1585 static void rx_timer_fn(unsigned long arg)
1586 {
1587 struct sci_port *s = (struct sci_port *)arg;
1588 struct uart_port *port = &s->port;
1589 u16 scr = serial_port_in(port, SCSCR);
1590
1591 if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
1592 scr &= ~0x4000;
1593 enable_irq(s->cfg->irqs[1]);
1594 }
1595 serial_port_out(port, SCSCR, scr | SCSCR_RIE);
1596 dev_dbg(port->dev, "DMA Rx timed out\n");
1597 schedule_work(&s->work_rx);
1598 }
1599
1600 static void sci_request_dma(struct uart_port *port)
1601 {
1602 struct sci_port *s = to_sci_port(port);
1603 struct sh_dmae_slave *param;
1604 struct dma_chan *chan;
1605 dma_cap_mask_t mask;
1606 int nent;
1607
1608 dev_dbg(port->dev, "%s: port %d\n", __func__,
1609 port->line);
1610
1611 if (s->cfg->dma_slave_tx <= 0 || s->cfg->dma_slave_rx <= 0)
1612 return;
1613
1614 dma_cap_zero(mask);
1615 dma_cap_set(DMA_SLAVE, mask);
1616
1617 param = &s->param_tx;
1618
1619 /* Slave ID, e.g., SHDMA_SLAVE_SCIF0_TX */
1620 param->slave_id = s->cfg->dma_slave_tx;
1621
1622 s->cookie_tx = -EINVAL;
1623 chan = dma_request_channel(mask, filter, param);
1624 dev_dbg(port->dev, "%s: TX: got channel %p\n", __func__, chan);
1625 if (chan) {
1626 s->chan_tx = chan;
1627 sg_init_table(&s->sg_tx, 1);
1628 /* UART circular tx buffer is an aligned page. */
1629 BUG_ON((int)port->state->xmit.buf & ~PAGE_MASK);
1630 sg_set_page(&s->sg_tx, virt_to_page(port->state->xmit.buf),
1631 UART_XMIT_SIZE, (int)port->state->xmit.buf & ~PAGE_MASK);
1632 nent = dma_map_sg(port->dev, &s->sg_tx, 1, DMA_TO_DEVICE);
1633 if (!nent)
1634 sci_tx_dma_release(s, false);
1635 else
1636 dev_dbg(port->dev, "%s: mapped %d@%p to %x\n", __func__,
1637 sg_dma_len(&s->sg_tx),
1638 port->state->xmit.buf, sg_dma_address(&s->sg_tx));
1639
1640 s->sg_len_tx = nent;
1641
1642 INIT_WORK(&s->work_tx, work_fn_tx);
1643 }
1644
1645 param = &s->param_rx;
1646
1647 /* Slave ID, e.g., SHDMA_SLAVE_SCIF0_RX */
1648 param->slave_id = s->cfg->dma_slave_rx;
1649
1650 chan = dma_request_channel(mask, filter, param);
1651 dev_dbg(port->dev, "%s: RX: got channel %p\n", __func__, chan);
1652 if (chan) {
1653 dma_addr_t dma[2];
1654 void *buf[2];
1655 int i;
1656
1657 s->chan_rx = chan;
1658
1659 s->buf_len_rx = 2 * max(16, (int)port->fifosize);
1660 buf[0] = dma_alloc_coherent(port->dev, s->buf_len_rx * 2,
1661 &dma[0], GFP_KERNEL);
1662
1663 if (!buf[0]) {
1664 dev_warn(port->dev,
1665 "failed to allocate dma buffer, using PIO\n");
1666 sci_rx_dma_release(s, true);
1667 return;
1668 }
1669
1670 buf[1] = buf[0] + s->buf_len_rx;
1671 dma[1] = dma[0] + s->buf_len_rx;
1672
1673 for (i = 0; i < 2; i++) {
1674 struct scatterlist *sg = &s->sg_rx[i];
1675
1676 sg_init_table(sg, 1);
1677 sg_set_page(sg, virt_to_page(buf[i]), s->buf_len_rx,
1678 (int)buf[i] & ~PAGE_MASK);
1679 sg_dma_address(sg) = dma[i];
1680 }
1681
1682 INIT_WORK(&s->work_rx, work_fn_rx);
1683 setup_timer(&s->rx_timer, rx_timer_fn, (unsigned long)s);
1684
1685 sci_submit_rx(s);
1686 }
1687 }
1688
1689 static void sci_free_dma(struct uart_port *port)
1690 {
1691 struct sci_port *s = to_sci_port(port);
1692
1693 if (s->chan_tx)
1694 sci_tx_dma_release(s, false);
1695 if (s->chan_rx)
1696 sci_rx_dma_release(s, false);
1697 }
1698 #else
1699 static inline void sci_request_dma(struct uart_port *port)
1700 {
1701 }
1702
1703 static inline void sci_free_dma(struct uart_port *port)
1704 {
1705 }
1706 #endif
1707
1708 static int sci_startup(struct uart_port *port)
1709 {
1710 struct sci_port *s = to_sci_port(port);
1711 int ret;
1712
1713 dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
1714
1715 pm_runtime_put_noidle(port->dev);
1716
1717 sci_port_enable(s);
1718
1719 ret = sci_request_irq(s);
1720 if (unlikely(ret < 0))
1721 return ret;
1722
1723 sci_request_dma(port);
1724
1725 sci_start_tx(port);
1726 sci_start_rx(port);
1727
1728 return 0;
1729 }
1730
1731 static void sci_shutdown(struct uart_port *port)
1732 {
1733 struct sci_port *s = to_sci_port(port);
1734
1735 dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
1736
1737 sci_stop_rx(port);
1738 sci_stop_tx(port);
1739
1740 sci_free_dma(port);
1741 sci_free_irq(s);
1742
1743 sci_port_disable(s);
1744
1745 pm_runtime_get_noresume(port->dev);
1746 }
1747
1748 static unsigned int sci_scbrr_calc(unsigned int algo_id, unsigned int bps,
1749 unsigned long freq)
1750 {
1751 switch (algo_id) {
1752 case SCBRR_ALGO_1:
1753 return ((freq + 16 * bps) / (16 * bps) - 1);
1754 case SCBRR_ALGO_2:
1755 return ((freq + 16 * bps) / (32 * bps) - 1);
1756 case SCBRR_ALGO_3:
1757 return (((freq * 2) + 16 * bps) / (16 * bps) - 1);
1758 case SCBRR_ALGO_4:
1759 return (((freq * 2) + 16 * bps) / (32 * bps) - 1);
1760 case SCBRR_ALGO_5:
1761 return (((freq * 1000 / 32) / bps) - 1);
1762 }
1763
1764 /* Warn, but use a safe default */
1765 WARN_ON(1);
1766
1767 return ((freq + 16 * bps) / (32 * bps) - 1);
1768 }
1769
1770 static void sci_reset(struct uart_port *port)
1771 {
1772 struct plat_sci_reg *reg;
1773 unsigned int status;
1774
1775 do {
1776 status = serial_port_in(port, SCxSR);
1777 } while (!(status & SCxSR_TEND(port)));
1778
1779 serial_port_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */
1780
1781 reg = sci_getreg(port, SCFCR);
1782 if (reg->size)
1783 serial_port_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST);
1784 }
1785
1786 static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
1787 struct ktermios *old)
1788 {
1789 struct sci_port *s = to_sci_port(port);
1790 struct plat_sci_reg *reg;
1791 unsigned int baud, smr_val, max_baud;
1792 int t = -1;
1793
1794 /*
1795 * earlyprintk comes here early on with port->uartclk set to zero.
1796 * the clock framework is not up and running at this point so here
1797 * we assume that 115200 is the maximum baud rate. please note that
1798 * the baud rate is not programmed during earlyprintk - it is assumed
1799 * that the previous boot loader has enabled required clocks and
1800 * setup the baud rate generator hardware for us already.
1801 */
1802 max_baud = port->uartclk ? port->uartclk / 16 : 115200;
1803
1804 baud = uart_get_baud_rate(port, termios, old, 0, max_baud);
1805 if (likely(baud && port->uartclk))
1806 t = sci_scbrr_calc(s->cfg->scbrr_algo_id, baud, port->uartclk);
1807
1808 sci_port_enable(s);
1809
1810 sci_reset(port);
1811
1812 smr_val = serial_port_in(port, SCSMR) & 3;
1813
1814 if ((termios->c_cflag & CSIZE) == CS7)
1815 smr_val |= 0x40;
1816 if (termios->c_cflag & PARENB)
1817 smr_val |= 0x20;
1818 if (termios->c_cflag & PARODD)
1819 smr_val |= 0x30;
1820 if (termios->c_cflag & CSTOPB)
1821 smr_val |= 0x08;
1822
1823 uart_update_timeout(port, termios->c_cflag, baud);
1824
1825 serial_port_out(port, SCSMR, smr_val);
1826
1827 dev_dbg(port->dev, "%s: SMR %x, t %x, SCSCR %x\n", __func__, smr_val, t,
1828 s->cfg->scscr);
1829
1830 if (t > 0) {
1831 if (t >= 256) {
1832 serial_port_out(port, SCSMR, (serial_port_in(port, SCSMR) & ~3) | 1);
1833 t >>= 2;
1834 } else
1835 serial_port_out(port, SCSMR, serial_port_in(port, SCSMR) & ~3);
1836
1837 serial_port_out(port, SCBRR, t);
1838 udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */
1839 }
1840
1841 sci_init_pins(port, termios->c_cflag);
1842
1843 reg = sci_getreg(port, SCFCR);
1844 if (reg->size) {
1845 unsigned short ctrl = serial_port_in(port, SCFCR);
1846
1847 if (s->cfg->capabilities & SCIx_HAVE_RTSCTS) {
1848 if (termios->c_cflag & CRTSCTS)
1849 ctrl |= SCFCR_MCE;
1850 else
1851 ctrl &= ~SCFCR_MCE;
1852 }
1853
1854 /*
1855 * As we've done a sci_reset() above, ensure we don't
1856 * interfere with the FIFOs while toggling MCE. As the
1857 * reset values could still be set, simply mask them out.
1858 */
1859 ctrl &= ~(SCFCR_RFRST | SCFCR_TFRST);
1860
1861 serial_port_out(port, SCFCR, ctrl);
1862 }
1863
1864 serial_port_out(port, SCSCR, s->cfg->scscr);
1865
1866 #ifdef CONFIG_SERIAL_SH_SCI_DMA
1867 /*
1868 * Calculate delay for 1.5 DMA buffers: see
1869 * drivers/serial/serial_core.c::uart_update_timeout(). With 10 bits
1870 * (CS8), 250Hz, 115200 baud and 64 bytes FIFO, the above function
1871 * calculates 1 jiffie for the data plus 5 jiffies for the "slop(e)."
1872 * Then below we calculate 3 jiffies (12ms) for 1.5 DMA buffers (3 FIFO
1873 * sizes), but it has been found out experimentally, that this is not
1874 * enough: the driver too often needlessly runs on a DMA timeout. 20ms
1875 * as a minimum seem to work perfectly.
1876 */
1877 if (s->chan_rx) {
1878 s->rx_timeout = (port->timeout - HZ / 50) * s->buf_len_rx * 3 /
1879 port->fifosize / 2;
1880 dev_dbg(port->dev,
1881 "DMA Rx t-out %ums, tty t-out %u jiffies\n",
1882 s->rx_timeout * 1000 / HZ, port->timeout);
1883 if (s->rx_timeout < msecs_to_jiffies(20))
1884 s->rx_timeout = msecs_to_jiffies(20);
1885 }
1886 #endif
1887
1888 if ((termios->c_cflag & CREAD) != 0)
1889 sci_start_rx(port);
1890
1891 sci_port_disable(s);
1892 }
1893
1894 static const char *sci_type(struct uart_port *port)
1895 {
1896 switch (port->type) {
1897 case PORT_IRDA:
1898 return "irda";
1899 case PORT_SCI:
1900 return "sci";
1901 case PORT_SCIF:
1902 return "scif";
1903 case PORT_SCIFA:
1904 return "scifa";
1905 case PORT_SCIFB:
1906 return "scifb";
1907 }
1908
1909 return NULL;
1910 }
1911
1912 static inline unsigned long sci_port_size(struct uart_port *port)
1913 {
1914 /*
1915 * Pick an arbitrary size that encapsulates all of the base
1916 * registers by default. This can be optimized later, or derived
1917 * from platform resource data at such a time that ports begin to
1918 * behave more erratically.
1919 */
1920 return 64;
1921 }
1922
1923 static int sci_remap_port(struct uart_port *port)
1924 {
1925 unsigned long size = sci_port_size(port);
1926
1927 /*
1928 * Nothing to do if there's already an established membase.
1929 */
1930 if (port->membase)
1931 return 0;
1932
1933 if (port->flags & UPF_IOREMAP) {
1934 port->membase = ioremap_nocache(port->mapbase, size);
1935 if (unlikely(!port->membase)) {
1936 dev_err(port->dev, "can't remap port#%d\n", port->line);
1937 return -ENXIO;
1938 }
1939 } else {
1940 /*
1941 * For the simple (and majority of) cases where we don't
1942 * need to do any remapping, just cast the cookie
1943 * directly.
1944 */
1945 port->membase = (void __iomem *)port->mapbase;
1946 }
1947
1948 return 0;
1949 }
1950
1951 static void sci_release_port(struct uart_port *port)
1952 {
1953 if (port->flags & UPF_IOREMAP) {
1954 iounmap(port->membase);
1955 port->membase = NULL;
1956 }
1957
1958 release_mem_region(port->mapbase, sci_port_size(port));
1959 }
1960
1961 static int sci_request_port(struct uart_port *port)
1962 {
1963 unsigned long size = sci_port_size(port);
1964 struct resource *res;
1965 int ret;
1966
1967 res = request_mem_region(port->mapbase, size, dev_name(port->dev));
1968 if (unlikely(res == NULL))
1969 return -EBUSY;
1970
1971 ret = sci_remap_port(port);
1972 if (unlikely(ret != 0)) {
1973 release_resource(res);
1974 return ret;
1975 }
1976
1977 return 0;
1978 }
1979
1980 static void sci_config_port(struct uart_port *port, int flags)
1981 {
1982 if (flags & UART_CONFIG_TYPE) {
1983 struct sci_port *sport = to_sci_port(port);
1984
1985 port->type = sport->cfg->type;
1986 sci_request_port(port);
1987 }
1988 }
1989
1990 static int sci_verify_port(struct uart_port *port, struct serial_struct *ser)
1991 {
1992 struct sci_port *s = to_sci_port(port);
1993
1994 if (ser->irq != s->cfg->irqs[SCIx_TXI_IRQ] || ser->irq > nr_irqs)
1995 return -EINVAL;
1996 if (ser->baud_base < 2400)
1997 /* No paper tape reader for Mitch.. */
1998 return -EINVAL;
1999
2000 return 0;
2001 }
2002
2003 static struct uart_ops sci_uart_ops = {
2004 .tx_empty = sci_tx_empty,
2005 .set_mctrl = sci_set_mctrl,
2006 .get_mctrl = sci_get_mctrl,
2007 .start_tx = sci_start_tx,
2008 .stop_tx = sci_stop_tx,
2009 .stop_rx = sci_stop_rx,
2010 .enable_ms = sci_enable_ms,
2011 .break_ctl = sci_break_ctl,
2012 .startup = sci_startup,
2013 .shutdown = sci_shutdown,
2014 .set_termios = sci_set_termios,
2015 .type = sci_type,
2016 .release_port = sci_release_port,
2017 .request_port = sci_request_port,
2018 .config_port = sci_config_port,
2019 .verify_port = sci_verify_port,
2020 #ifdef CONFIG_CONSOLE_POLL
2021 .poll_get_char = sci_poll_get_char,
2022 .poll_put_char = sci_poll_put_char,
2023 #endif
2024 };
2025
2026 static int __devinit sci_init_single(struct platform_device *dev,
2027 struct sci_port *sci_port,
2028 unsigned int index,
2029 struct plat_sci_port *p)
2030 {
2031 struct uart_port *port = &sci_port->port;
2032 int ret;
2033
2034 sci_port->cfg = p;
2035
2036 port->ops = &sci_uart_ops;
2037 port->iotype = UPIO_MEM;
2038 port->line = index;
2039
2040 switch (p->type) {
2041 case PORT_SCIFB:
2042 port->fifosize = 256;
2043 break;
2044 case PORT_SCIFA:
2045 port->fifosize = 64;
2046 break;
2047 case PORT_SCIF:
2048 port->fifosize = 16;
2049 break;
2050 default:
2051 port->fifosize = 1;
2052 break;
2053 }
2054
2055 if (p->regtype == SCIx_PROBE_REGTYPE) {
2056 ret = sci_probe_regmap(p);
2057 if (unlikely(ret))
2058 return ret;
2059 }
2060
2061 if (dev) {
2062 sci_port->iclk = clk_get(&dev->dev, "sci_ick");
2063 if (IS_ERR(sci_port->iclk)) {
2064 sci_port->iclk = clk_get(&dev->dev, "peripheral_clk");
2065 if (IS_ERR(sci_port->iclk)) {
2066 dev_err(&dev->dev, "can't get iclk\n");
2067 return PTR_ERR(sci_port->iclk);
2068 }
2069 }
2070
2071 /*
2072 * The function clock is optional, ignore it if we can't
2073 * find it.
2074 */
2075 sci_port->fclk = clk_get(&dev->dev, "sci_fck");
2076 if (IS_ERR(sci_port->fclk))
2077 sci_port->fclk = NULL;
2078
2079 port->dev = &dev->dev;
2080
2081 sci_init_gpios(sci_port);
2082
2083 pm_runtime_irq_safe(&dev->dev);
2084 pm_runtime_get_noresume(&dev->dev);
2085 pm_runtime_enable(&dev->dev);
2086 }
2087
2088 sci_port->break_timer.data = (unsigned long)sci_port;
2089 sci_port->break_timer.function = sci_break_timer;
2090 init_timer(&sci_port->break_timer);
2091
2092 /*
2093 * Establish some sensible defaults for the error detection.
2094 */
2095 if (!p->error_mask)
2096 p->error_mask = (p->type == PORT_SCI) ?
2097 SCI_DEFAULT_ERROR_MASK : SCIF_DEFAULT_ERROR_MASK;
2098
2099 /*
2100 * Establish sensible defaults for the overrun detection, unless
2101 * the part has explicitly disabled support for it.
2102 */
2103 if (p->overrun_bit != SCIx_NOT_SUPPORTED) {
2104 if (p->type == PORT_SCI)
2105 p->overrun_bit = 5;
2106 else if (p->scbrr_algo_id == SCBRR_ALGO_4)
2107 p->overrun_bit = 9;
2108 else
2109 p->overrun_bit = 0;
2110
2111 /*
2112 * Make the error mask inclusive of overrun detection, if
2113 * supported.
2114 */
2115 p->error_mask |= (1 << p->overrun_bit);
2116 }
2117
2118 port->mapbase = p->mapbase;
2119 port->type = p->type;
2120 port->flags = p->flags;
2121 port->regshift = p->regshift;
2122
2123 /*
2124 * The UART port needs an IRQ value, so we peg this to the RX IRQ
2125 * for the multi-IRQ ports, which is where we are primarily
2126 * concerned with the shutdown path synchronization.
2127 *
2128 * For the muxed case there's nothing more to do.
2129 */
2130 port->irq = p->irqs[SCIx_RXI_IRQ];
2131 port->irqflags = 0;
2132
2133 port->serial_in = sci_serial_in;
2134 port->serial_out = sci_serial_out;
2135
2136 if (p->dma_slave_tx > 0 && p->dma_slave_rx > 0)
2137 dev_dbg(port->dev, "DMA tx %d, rx %d\n",
2138 p->dma_slave_tx, p->dma_slave_rx);
2139
2140 return 0;
2141 }
2142
2143 #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
2144 static void serial_console_putchar(struct uart_port *port, int ch)
2145 {
2146 sci_poll_put_char(port, ch);
2147 }
2148
2149 /*
2150 * Print a string to the serial port trying not to disturb
2151 * any possible real use of the port...
2152 */
2153 static void serial_console_write(struct console *co, const char *s,
2154 unsigned count)
2155 {
2156 struct sci_port *sci_port = &sci_ports[co->index];
2157 struct uart_port *port = &sci_port->port;
2158 unsigned short bits;
2159
2160 sci_port_enable(sci_port);
2161
2162 uart_console_write(port, s, count, serial_console_putchar);
2163
2164 /* wait until fifo is empty and last bit has been transmitted */
2165 bits = SCxSR_TDxE(port) | SCxSR_TEND(port);
2166 while ((serial_port_in(port, SCxSR) & bits) != bits)
2167 cpu_relax();
2168
2169 sci_port_disable(sci_port);
2170 }
2171
2172 static int __devinit serial_console_setup(struct console *co, char *options)
2173 {
2174 struct sci_port *sci_port;
2175 struct uart_port *port;
2176 int baud = 115200;
2177 int bits = 8;
2178 int parity = 'n';
2179 int flow = 'n';
2180 int ret;
2181
2182 /*
2183 * Refuse to handle any bogus ports.
2184 */
2185 if (co->index < 0 || co->index >= SCI_NPORTS)
2186 return -ENODEV;
2187
2188 sci_port = &sci_ports[co->index];
2189 port = &sci_port->port;
2190
2191 /*
2192 * Refuse to handle uninitialized ports.
2193 */
2194 if (!port->ops)
2195 return -ENODEV;
2196
2197 ret = sci_remap_port(port);
2198 if (unlikely(ret != 0))
2199 return ret;
2200
2201 sci_port_enable(sci_port);
2202
2203 if (options)
2204 uart_parse_options(options, &baud, &parity, &bits, &flow);
2205
2206 sci_port_disable(sci_port);
2207
2208 return uart_set_options(port, co, baud, parity, bits, flow);
2209 }
2210
2211 static struct console serial_console = {
2212 .name = "ttySC",
2213 .device = uart_console_device,
2214 .write = serial_console_write,
2215 .setup = serial_console_setup,
2216 .flags = CON_PRINTBUFFER,
2217 .index = -1,
2218 .data = &sci_uart_driver,
2219 };
2220
2221 static struct console early_serial_console = {
2222 .name = "early_ttySC",
2223 .write = serial_console_write,
2224 .flags = CON_PRINTBUFFER,
2225 .index = -1,
2226 };
2227
2228 static char early_serial_buf[32];
2229
2230 static int __devinit sci_probe_earlyprintk(struct platform_device *pdev)
2231 {
2232 struct plat_sci_port *cfg = pdev->dev.platform_data;
2233
2234 if (early_serial_console.data)
2235 return -EEXIST;
2236
2237 early_serial_console.index = pdev->id;
2238
2239 sci_init_single(NULL, &sci_ports[pdev->id], pdev->id, cfg);
2240
2241 serial_console_setup(&early_serial_console, early_serial_buf);
2242
2243 if (!strstr(early_serial_buf, "keep"))
2244 early_serial_console.flags |= CON_BOOT;
2245
2246 register_console(&early_serial_console);
2247 return 0;
2248 }
2249
2250 #define uart_console(port) ((port)->cons->index == (port)->line)
2251
2252 static int sci_runtime_suspend(struct device *dev)
2253 {
2254 struct sci_port *sci_port = dev_get_drvdata(dev);
2255 struct uart_port *port = &sci_port->port;
2256
2257 if (uart_console(port)) {
2258 struct plat_sci_reg *reg;
2259
2260 sci_port->saved_smr = serial_port_in(port, SCSMR);
2261 sci_port->saved_brr = serial_port_in(port, SCBRR);
2262
2263 reg = sci_getreg(port, SCFCR);
2264 if (reg->size)
2265 sci_port->saved_fcr = serial_port_in(port, SCFCR);
2266 else
2267 sci_port->saved_fcr = 0;
2268 }
2269 return 0;
2270 }
2271
2272 static int sci_runtime_resume(struct device *dev)
2273 {
2274 struct sci_port *sci_port = dev_get_drvdata(dev);
2275 struct uart_port *port = &sci_port->port;
2276
2277 if (uart_console(port)) {
2278 sci_reset(port);
2279 serial_port_out(port, SCSMR, sci_port->saved_smr);
2280 serial_port_out(port, SCBRR, sci_port->saved_brr);
2281
2282 if (sci_port->saved_fcr)
2283 serial_port_out(port, SCFCR, sci_port->saved_fcr);
2284
2285 serial_port_out(port, SCSCR, sci_port->cfg->scscr);
2286 }
2287 return 0;
2288 }
2289
2290 #define SCI_CONSOLE (&serial_console)
2291
2292 #else
2293 static inline int __devinit sci_probe_earlyprintk(struct platform_device *pdev)
2294 {
2295 return -EINVAL;
2296 }
2297
2298 #define SCI_CONSOLE NULL
2299 #define sci_runtime_suspend NULL
2300 #define sci_runtime_resume NULL
2301
2302 #endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
2303
2304 static char banner[] __initdata =
2305 KERN_INFO "SuperH SCI(F) driver initialized\n";
2306
2307 static struct uart_driver sci_uart_driver = {
2308 .owner = THIS_MODULE,
2309 .driver_name = "sci",
2310 .dev_name = "ttySC",
2311 .major = SCI_MAJOR,
2312 .minor = SCI_MINOR_START,
2313 .nr = SCI_NPORTS,
2314 .cons = SCI_CONSOLE,
2315 };
2316
2317 static int sci_remove(struct platform_device *dev)
2318 {
2319 struct sci_port *port = platform_get_drvdata(dev);
2320
2321 cpufreq_unregister_notifier(&port->freq_transition,
2322 CPUFREQ_TRANSITION_NOTIFIER);
2323
2324 sci_free_gpios(port);
2325
2326 uart_remove_one_port(&sci_uart_driver, &port->port);
2327
2328 clk_put(port->iclk);
2329 clk_put(port->fclk);
2330
2331 pm_runtime_disable(&dev->dev);
2332 return 0;
2333 }
2334
2335 static int __devinit sci_probe_single(struct platform_device *dev,
2336 unsigned int index,
2337 struct plat_sci_port *p,
2338 struct sci_port *sciport)
2339 {
2340 int ret;
2341
2342 /* Sanity check */
2343 if (unlikely(index >= SCI_NPORTS)) {
2344 dev_notice(&dev->dev, "Attempting to register port "
2345 "%d when only %d are available.\n",
2346 index+1, SCI_NPORTS);
2347 dev_notice(&dev->dev, "Consider bumping "
2348 "CONFIG_SERIAL_SH_SCI_NR_UARTS!\n");
2349 return 0;
2350 }
2351
2352 ret = sci_init_single(dev, sciport, index, p);
2353 if (ret)
2354 return ret;
2355
2356 return uart_add_one_port(&sci_uart_driver, &sciport->port);
2357 }
2358
2359 static int __devinit sci_probe(struct platform_device *dev)
2360 {
2361 struct plat_sci_port *p = dev->dev.platform_data;
2362 struct sci_port *sp = &sci_ports[dev->id];
2363 int ret;
2364
2365 /*
2366 * If we've come here via earlyprintk initialization, head off to
2367 * the special early probe. We don't have sufficient device state
2368 * to make it beyond this yet.
2369 */
2370 if (is_early_platform_device(dev))
2371 return sci_probe_earlyprintk(dev);
2372
2373 platform_set_drvdata(dev, sp);
2374
2375 ret = sci_probe_single(dev, dev->id, p, sp);
2376 if (ret)
2377 goto err_unreg;
2378
2379 sp->freq_transition.notifier_call = sci_notifier;
2380
2381 ret = cpufreq_register_notifier(&sp->freq_transition,
2382 CPUFREQ_TRANSITION_NOTIFIER);
2383 if (unlikely(ret < 0))
2384 goto err_unreg;
2385
2386 #ifdef CONFIG_SH_STANDARD_BIOS
2387 sh_bios_gdb_detach();
2388 #endif
2389
2390 return 0;
2391
2392 err_unreg:
2393 sci_remove(dev);
2394 return ret;
2395 }
2396
2397 static int sci_suspend(struct device *dev)
2398 {
2399 struct sci_port *sport = dev_get_drvdata(dev);
2400
2401 if (sport)
2402 uart_suspend_port(&sci_uart_driver, &sport->port);
2403
2404 return 0;
2405 }
2406
2407 static int sci_resume(struct device *dev)
2408 {
2409 struct sci_port *sport = dev_get_drvdata(dev);
2410
2411 if (sport)
2412 uart_resume_port(&sci_uart_driver, &sport->port);
2413
2414 return 0;
2415 }
2416
2417 static const struct dev_pm_ops sci_dev_pm_ops = {
2418 .runtime_suspend = sci_runtime_suspend,
2419 .runtime_resume = sci_runtime_resume,
2420 .suspend = sci_suspend,
2421 .resume = sci_resume,
2422 };
2423
2424 static struct platform_driver sci_driver = {
2425 .probe = sci_probe,
2426 .remove = sci_remove,
2427 .driver = {
2428 .name = "sh-sci",
2429 .owner = THIS_MODULE,
2430 .pm = &sci_dev_pm_ops,
2431 },
2432 };
2433
2434 static int __init sci_init(void)
2435 {
2436 int ret;
2437
2438 printk(banner);
2439
2440 ret = uart_register_driver(&sci_uart_driver);
2441 if (likely(ret == 0)) {
2442 ret = platform_driver_register(&sci_driver);
2443 if (unlikely(ret))
2444 uart_unregister_driver(&sci_uart_driver);
2445 }
2446
2447 return ret;
2448 }
2449
2450 static void __exit sci_exit(void)
2451 {
2452 platform_driver_unregister(&sci_driver);
2453 uart_unregister_driver(&sci_uart_driver);
2454 }
2455
2456 #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
2457 early_platform_init_buffer("earlyprintk", &sci_driver,
2458 early_serial_buf, ARRAY_SIZE(early_serial_buf));
2459 #endif
2460 module_init(sci_init);
2461 module_exit(sci_exit);
2462
2463 MODULE_LICENSE("GPL");
2464 MODULE_ALIAS("platform:sh-sci");
2465 MODULE_AUTHOR("Paul Mundt");
2466 MODULE_DESCRIPTION("SuperH SCI(F) serial driver");
Linux with added FPC-III support