drivers/tty/serial/uartlite.c

   1 /*
   2  * uartlite.c: Serial driver for Xilinx uartlite serial controller
   3  *
   4  * Copyright (C) 2006 Peter Korsgaard <jacmet@sunsite.dk>
   5  * Copyright (C) 2007 Secret Lab Technologies Ltd.
   6  *
   7  * This file is licensed under the terms of the GNU General Public License
   8  * version 2.  This program is licensed "as is" without any warranty of any
   9  * kind, whether express or implied.
  10  */
  11
  12 #include <linux/platform_device.h>
  13 #include <linux/module.h>
  14 #include <linux/console.h>
  15 #include <linux/serial.h>
  16 #include <linux/serial_core.h>
  17 #include <linux/tty.h>
  18 #include <linux/tty_flip.h>
  19 #include <linux/delay.h>
  20 #include <linux/interrupt.h>
  21 #include <linux/init.h>
  22 #include <asm/io.h>
  23 #include <linux/of.h>
  24 #include <linux/of_address.h>
  25 #include <linux/of_device.h>
  26 #include <linux/of_platform.h>
  27
  28 #define ULITE_NAME              "ttyUL"
  29 #define ULITE_MAJOR             204
  30 #define ULITE_MINOR             187
  31 #define ULITE_NR_UARTS          4
  32
  33 /* ---------------------------------------------------------------------
  34  * Register definitions
  35  *
  36  * For register details see datasheet:
  37  * http://www.xilinx.com/support/documentation/ip_documentation/opb_uartlite.pdf
  38  */
  39
  40 #define ULITE_RX                0x00
  41 #define ULITE_TX                0x04
  42 #define ULITE_STATUS            0x08
  43 #define ULITE_CONTROL           0x0c
  44
  45 #define ULITE_REGION            16
  46
  47 #define ULITE_STATUS_RXVALID    0x01
  48 #define ULITE_STATUS_RXFULL     0x02
  49 #define ULITE_STATUS_TXEMPTY    0x04
  50 #define ULITE_STATUS_TXFULL     0x08
  51 #define ULITE_STATUS_IE         0x10
  52 #define ULITE_STATUS_OVERRUN    0x20
  53 #define ULITE_STATUS_FRAME      0x40
  54 #define ULITE_STATUS_PARITY     0x80
  55
  56 #define ULITE_CONTROL_RST_TX    0x01
  57 #define ULITE_CONTROL_RST_RX    0x02
  58 #define ULITE_CONTROL_IE        0x10
  59
  60
  61 static struct uart_port ulite_ports[ULITE_NR_UARTS];
  62
  63 /* ---------------------------------------------------------------------
  64  * Core UART driver operations
  65  */
  66
  67 static int ulite_receive(struct uart_port *port, int stat)
  68 {
  69         struct tty_struct *tty = port->state->port.tty;
  70         unsigned char ch = 0;
  71         char flag = TTY_NORMAL;
  72
  73         if ((stat & (ULITE_STATUS_RXVALID | ULITE_STATUS_OVERRUN
  74                      | ULITE_STATUS_FRAME)) == 0)
  75                 return 0;
  76
  77         /* stats */
  78         if (stat & ULITE_STATUS_RXVALID) {
  79                 port->icount.rx++;
  80                 ch = ioread32be(port->membase + ULITE_RX);
  81
  82                 if (stat & ULITE_STATUS_PARITY)
  83                         port->icount.parity++;
  84         }
  85
  86         if (stat & ULITE_STATUS_OVERRUN)
  87                 port->icount.overrun++;
  88
  89         if (stat & ULITE_STATUS_FRAME)
  90                 port->icount.frame++;
  91
  92
  93         /* drop byte with parity error if IGNPAR specificed */
  94         if (stat & port->ignore_status_mask & ULITE_STATUS_PARITY)
  95                 stat &= ~ULITE_STATUS_RXVALID;
  96
  97         stat &= port->read_status_mask;
  98
  99         if (stat & ULITE_STATUS_PARITY)
 100                 flag = TTY_PARITY;
 101
 102
 103         stat &= ~port->ignore_status_mask;
 104
 105         if (stat & ULITE_STATUS_RXVALID)
 106                 tty_insert_flip_char(tty, ch, flag);
 107
 108         if (stat & ULITE_STATUS_FRAME)
 109                 tty_insert_flip_char(tty, 0, TTY_FRAME);
 110
 111         if (stat & ULITE_STATUS_OVERRUN)
 112                 tty_insert_flip_char(tty, 0, TTY_OVERRUN);
 113
 114         return 1;
 115 }
 116
 117 static int ulite_transmit(struct uart_port *port, int stat)
 118 {
 119         struct circ_buf *xmit  = &port->state->xmit;
 120
 121         if (stat & ULITE_STATUS_TXFULL)
 122                 return 0;
 123
 124         if (port->x_char) {
 125                 iowrite32be(port->x_char, port->membase + ULITE_TX);
 126                 port->x_char = 0;
 127                 port->icount.tx++;
 128                 return 1;
 129         }
 130
 131         if (uart_circ_empty(xmit) || uart_tx_stopped(port))
 132                 return 0;
 133
 134         iowrite32be(xmit->buf[xmit->tail], port->membase + ULITE_TX);
 135         xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE-1);
 136         port->icount.tx++;
 137
 138         /* wake up */
 139         if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 140                 uart_write_wakeup(port);
 141
 142         return 1;
 143 }
 144
 145 static irqreturn_t ulite_isr(int irq, void *dev_id)
 146 {
 147         struct uart_port *port = dev_id;
 148         int busy, n = 0;
 149
 150         do {
 151                 int stat = ioread32be(port->membase + ULITE_STATUS);
 152                 busy  = ulite_receive(port, stat);
 153                 busy |= ulite_transmit(port, stat);
 154                 n++;
 155         } while (busy);
 156
 157         /* work done? */
 158         if (n > 1) {
 159                 tty_flip_buffer_push(port->state->port.tty);
 160                 return IRQ_HANDLED;
 161         } else {
 162                 return IRQ_NONE;
 163         }
 164 }
 165
 166 static unsigned int ulite_tx_empty(struct uart_port *port)
 167 {
 168         unsigned long flags;
 169         unsigned int ret;
 170
 171         spin_lock_irqsave(&port->lock, flags);
 172         ret = ioread32be(port->membase + ULITE_STATUS);
 173         spin_unlock_irqrestore(&port->lock, flags);
 174
 175         return ret & ULITE_STATUS_TXEMPTY ? TIOCSER_TEMT : 0;
 176 }
 177
 178 static unsigned int ulite_get_mctrl(struct uart_port *port)
 179 {
 180         return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
 181 }
 182
 183 static void ulite_set_mctrl(struct uart_port *port, unsigned int mctrl)
 184 {
 185         /* N/A */
 186 }
 187
 188 static void ulite_stop_tx(struct uart_port *port)
 189 {
 190         /* N/A */
 191 }
 192
 193 static void ulite_start_tx(struct uart_port *port)
 194 {
 195         ulite_transmit(port, ioread32be(port->membase + ULITE_STATUS));
 196 }
 197
 198 static void ulite_stop_rx(struct uart_port *port)
 199 {
 200         /* don't forward any more data (like !CREAD) */
 201         port->ignore_status_mask = ULITE_STATUS_RXVALID | ULITE_STATUS_PARITY
 202                 | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN;
 203 }
 204
 205 static void ulite_enable_ms(struct uart_port *port)
 206 {
 207         /* N/A */
 208 }
 209
 210 static void ulite_break_ctl(struct uart_port *port, int ctl)
 211 {
 212         /* N/A */
 213 }
 214
 215 static int ulite_startup(struct uart_port *port)
 216 {
 217         int ret;
 218
 219         ret = request_irq(port->irq, ulite_isr,
 220                           IRQF_SHARED | IRQF_SAMPLE_RANDOM, "uartlite", port);
 221         if (ret)
 222                 return ret;
 223
 224         iowrite32be(ULITE_CONTROL_RST_RX | ULITE_CONTROL_RST_TX,
 225                port->membase + ULITE_CONTROL);
 226         iowrite32be(ULITE_CONTROL_IE, port->membase + ULITE_CONTROL);
 227
 228         return 0;
 229 }
 230
 231 static void ulite_shutdown(struct uart_port *port)
 232 {
 233         iowrite32be(0, port->membase + ULITE_CONTROL);
 234         ioread32be(port->membase + ULITE_CONTROL); /* dummy */
 235         free_irq(port->irq, port);
 236 }
 237
 238 static void ulite_set_termios(struct uart_port *port, struct ktermios *termios,
 239                               struct ktermios *old)
 240 {
 241         unsigned long flags;
 242         unsigned int baud;
 243
 244         spin_lock_irqsave(&port->lock, flags);
 245
 246         port->read_status_mask = ULITE_STATUS_RXVALID | ULITE_STATUS_OVERRUN
 247                 | ULITE_STATUS_TXFULL;
 248
 249         if (termios->c_iflag & INPCK)
 250                 port->read_status_mask |=
 251                         ULITE_STATUS_PARITY | ULITE_STATUS_FRAME;
 252
 253         port->ignore_status_mask = 0;
 254         if (termios->c_iflag & IGNPAR)
 255                 port->ignore_status_mask |= ULITE_STATUS_PARITY
 256                         | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN;
 257
 258         /* ignore all characters if CREAD is not set */
 259         if ((termios->c_cflag & CREAD) == 0)
 260                 port->ignore_status_mask |=
 261                         ULITE_STATUS_RXVALID | ULITE_STATUS_PARITY
 262                         | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN;
 263
 264         /* update timeout */
 265         baud = uart_get_baud_rate(port, termios, old, 0, 460800);
 266         uart_update_timeout(port, termios->c_cflag, baud);
 267
 268         spin_unlock_irqrestore(&port->lock, flags);
 269 }
 270
 271 static const char *ulite_type(struct uart_port *port)
 272 {
 273         return port->type == PORT_UARTLITE ? "uartlite" : NULL;
 274 }
 275
 276 static void ulite_release_port(struct uart_port *port)
 277 {
 278         release_mem_region(port->mapbase, ULITE_REGION);
 279         iounmap(port->membase);
 280         port->membase = NULL;
 281 }
 282
 283 static int ulite_request_port(struct uart_port *port)
 284 {
 285         pr_debug("ulite console: port=%p; port->mapbase=%llx\n",
 286                  port, (unsigned long long) port->mapbase);
 287
 288         if (!request_mem_region(port->mapbase, ULITE_REGION, "uartlite")) {
 289                 dev_err(port->dev, "Memory region busy\n");
 290                 return -EBUSY;
 291         }
 292
 293         port->membase = ioremap(port->mapbase, ULITE_REGION);
 294         if (!port->membase) {
 295                 dev_err(port->dev, "Unable to map registers\n");
 296                 release_mem_region(port->mapbase, ULITE_REGION);
 297                 return -EBUSY;
 298         }
 299
 300         return 0;
 301 }
 302
 303 static void ulite_config_port(struct uart_port *port, int flags)
 304 {
 305         if (!ulite_request_port(port))
 306                 port->type = PORT_UARTLITE;
 307 }
 308
 309 static int ulite_verify_port(struct uart_port *port, struct serial_struct *ser)
 310 {
 311         /* we don't want the core code to modify any port params */
 312         return -EINVAL;
 313 }
 314
 315 #ifdef CONFIG_CONSOLE_POLL
 316 static int ulite_get_poll_char(struct uart_port *port)
 317 {
 318         if (!(ioread32be(port->membase + ULITE_STATUS)
 319                                                 & ULITE_STATUS_RXVALID))
 320                 return NO_POLL_CHAR;
 321
 322         return ioread32be(port->membase + ULITE_RX);
 323 }
 324
 325 static void ulite_put_poll_char(struct uart_port *port, unsigned char ch)
 326 {
 327         while (ioread32be(port->membase + ULITE_STATUS) & ULITE_STATUS_TXFULL)
 328                 cpu_relax();
 329
 330         /* write char to device */
 331         iowrite32be(ch, port->membase + ULITE_TX);
 332 }
 333 #endif
 334
 335 static struct uart_ops ulite_ops = {
 336         .tx_empty       = ulite_tx_empty,
 337         .set_mctrl      = ulite_set_mctrl,
 338         .get_mctrl      = ulite_get_mctrl,
 339         .stop_tx        = ulite_stop_tx,
 340         .start_tx       = ulite_start_tx,
 341         .stop_rx        = ulite_stop_rx,
 342         .enable_ms      = ulite_enable_ms,
 343         .break_ctl      = ulite_break_ctl,
 344         .startup        = ulite_startup,
 345         .shutdown       = ulite_shutdown,
 346         .set_termios    = ulite_set_termios,
 347         .type           = ulite_type,
 348         .release_port   = ulite_release_port,
 349         .request_port   = ulite_request_port,
 350         .config_port    = ulite_config_port,
 351         .verify_port    = ulite_verify_port,
 352 #ifdef CONFIG_CONSOLE_POLL
 353         .poll_get_char  = ulite_get_poll_char,
 354         .poll_put_char  = ulite_put_poll_char,
 355 #endif
 356 };
 357
 358 /* ---------------------------------------------------------------------
 359  * Console driver operations
 360  */
 361
 362 #ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
 363 static void ulite_console_wait_tx(struct uart_port *port)
 364 {
 365         int i;
 366         u8 val;
 367
 368         /* Spin waiting for TX fifo to have space available */
 369         for (i = 0; i < 100000; i++) {
 370                 val = ioread32be(port->membase + ULITE_STATUS);
 371                 if ((val & ULITE_STATUS_TXFULL) == 0)
 372                         break;
 373                 cpu_relax();
 374         }
 375 }
 376
 377 static void ulite_console_putchar(struct uart_port *port, int ch)
 378 {
 379         ulite_console_wait_tx(port);
 380         iowrite32be(ch, port->membase + ULITE_TX);
 381 }
 382
 383 static void ulite_console_write(struct console *co, const char *s,
 384                                 unsigned int count)
 385 {
 386         struct uart_port *port = &ulite_ports[co->index];
 387         unsigned long flags;
 388         unsigned int ier;
 389         int locked = 1;
 390
 391         if (oops_in_progress) {
 392                 locked = spin_trylock_irqsave(&port->lock, flags);
 393         } else
 394                 spin_lock_irqsave(&port->lock, flags);
 395
 396         /* save and disable interrupt */
 397         ier = ioread32be(port->membase + ULITE_STATUS) & ULITE_STATUS_IE;
 398         iowrite32be(0, port->membase + ULITE_CONTROL);
 399
 400         uart_console_write(port, s, count, ulite_console_putchar);
 401
 402         ulite_console_wait_tx(port);
 403
 404         /* restore interrupt state */
 405         if (ier)
 406                 iowrite32be(ULITE_CONTROL_IE, port->membase + ULITE_CONTROL);
 407
 408         if (locked)
 409                 spin_unlock_irqrestore(&port->lock, flags);
 410 }
 411
 412 static int __devinit ulite_console_setup(struct console *co, char *options)
 413 {
 414         struct uart_port *port;
 415         int baud = 9600;
 416         int bits = 8;
 417         int parity = 'n';
 418         int flow = 'n';
 419
 420         if (co->index < 0 || co->index >= ULITE_NR_UARTS)
 421                 return -EINVAL;
 422
 423         port = &ulite_ports[co->index];
 424
 425         /* Has the device been initialized yet? */
 426         if (!port->mapbase) {
 427                 pr_debug("console on ttyUL%i not present\n", co->index);
 428                 return -ENODEV;
 429         }
 430
 431         /* not initialized yet? */
 432         if (!port->membase) {
 433                 if (ulite_request_port(port))
 434                         return -ENODEV;
 435         }
 436
 437         if (options)
 438                 uart_parse_options(options, &baud, &parity, &bits, &flow);
 439
 440         return uart_set_options(port, co, baud, parity, bits, flow);
 441 }
 442
 443 static struct uart_driver ulite_uart_driver;
 444
 445 static struct console ulite_console = {
 446         .name   = ULITE_NAME,
 447         .write  = ulite_console_write,
 448         .device = uart_console_device,
 449         .setup  = ulite_console_setup,
 450         .flags  = CON_PRINTBUFFER,
 451         .index  = -1, /* Specified on the cmdline (e.g. console=ttyUL0 ) */
 452         .data   = &ulite_uart_driver,
 453 };
 454
 455 static int __init ulite_console_init(void)
 456 {
 457         register_console(&ulite_console);
 458         return 0;
 459 }
 460
 461 console_initcall(ulite_console_init);
 462
 463 #endif /* CONFIG_SERIAL_UARTLITE_CONSOLE */
 464
 465 static struct uart_driver ulite_uart_driver = {
 466         .owner          = THIS_MODULE,
 467         .driver_name    = "uartlite",
 468         .dev_name       = ULITE_NAME,
 469         .major          = ULITE_MAJOR,
 470         .minor          = ULITE_MINOR,
 471         .nr             = ULITE_NR_UARTS,
 472 #ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
 473         .cons           = &ulite_console,
 474 #endif
 475 };
 476
 477 /* ---------------------------------------------------------------------
 478  * Port assignment functions (mapping devices to uart_port structures)
 479  */
 480
 481 /** ulite_assign: register a uartlite device with the driver
 482  *
 483  * @dev: pointer to device structure
 484  * @id: requested id number.  Pass -1 for automatic port assignment
 485  * @base: base address of uartlite registers
 486  * @irq: irq number for uartlite
 487  *
 488  * Returns: 0 on success, <0 otherwise
 489  */
 490 static int __devinit ulite_assign(struct device *dev, int id, u32 base, int irq)
 491 {
 492         struct uart_port *port;
 493         int rc;
 494
 495         /* if id = -1; then scan for a free id and use that */
 496         if (id < 0) {
 497                 for (id = 0; id < ULITE_NR_UARTS; id++)
 498                         if (ulite_ports[id].mapbase == 0)
 499                                 break;
 500         }
 501         if (id < 0 || id >= ULITE_NR_UARTS) {
 502                 dev_err(dev, "%s%i too large\n", ULITE_NAME, id);
 503                 return -EINVAL;
 504         }
 505
 506         if ((ulite_ports[id].mapbase) && (ulite_ports[id].mapbase != base)) {
 507                 dev_err(dev, "cannot assign to %s%i; it is already in use\n",
 508                         ULITE_NAME, id);
 509                 return -EBUSY;
 510         }
 511
 512         port = &ulite_ports[id];
 513
 514         spin_lock_init(&port->lock);
 515         port->fifosize = 16;
 516         port->regshift = 2;
 517         port->iotype = UPIO_MEM;
 518         port->iobase = 1; /* mark port in use */
 519         port->mapbase = base;
 520         port->membase = NULL;
 521         port->ops = &ulite_ops;
 522         port->irq = irq;
 523         port->flags = UPF_BOOT_AUTOCONF;
 524         port->dev = dev;
 525         port->type = PORT_UNKNOWN;
 526         port->line = id;
 527
 528         dev_set_drvdata(dev, port);
 529
 530         /* Register the port */
 531         rc = uart_add_one_port(&ulite_uart_driver, port);
 532         if (rc) {
 533                 dev_err(dev, "uart_add_one_port() failed; err=%i\n", rc);
 534                 port->mapbase = 0;
 535                 dev_set_drvdata(dev, NULL);
 536                 return rc;
 537         }
 538
 539         return 0;
 540 }
 541
 542 /** ulite_release: register a uartlite device with the driver
 543  *
 544  * @dev: pointer to device structure
 545  */
 546 static int __devexit ulite_release(struct device *dev)
 547 {
 548         struct uart_port *port = dev_get_drvdata(dev);
 549         int rc = 0;
 550
 551         if (port) {
 552                 rc = uart_remove_one_port(&ulite_uart_driver, port);
 553                 dev_set_drvdata(dev, NULL);
 554                 port->mapbase = 0;
 555         }
 556
 557         return rc;
 558 }
 559
 560 /* ---------------------------------------------------------------------
 561  * Platform bus binding
 562  */
 563
 564 #if defined(CONFIG_OF)
 565 /* Match table for of_platform binding */
 566 static struct of_device_id ulite_of_match[] __devinitdata = {
 567         { .compatible = "xlnx,opb-uartlite-1.00.b", },
 568         { .compatible = "xlnx,xps-uartlite-1.00.a", },
 569         {}
 570 };
 571 MODULE_DEVICE_TABLE(of, ulite_of_match);
 572 #endif /* CONFIG_OF */
 573
 574 static int __devinit ulite_probe(struct platform_device *pdev)
 575 {
 576         struct resource *res, *res2;
 577         int id = pdev->id;
 578 #ifdef CONFIG_OF
 579         const __be32 *prop;
 580
 581         prop = of_get_property(pdev->dev.of_node, "port-number", NULL);
 582         if (prop)
 583                 id = be32_to_cpup(prop);
 584 #endif
 585
 586         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 587         if (!res)
 588                 return -ENODEV;
 589
 590         res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 591         if (!res2)
 592                 return -ENODEV;
 593
 594         return ulite_assign(&pdev->dev, id, res->start, res2->start);
 595 }
 596
 597 static int __devexit ulite_remove(struct platform_device *pdev)
 598 {
 599         return ulite_release(&pdev->dev);
 600 }
 601
 602 /* work with hotplug and coldplug */
 603 MODULE_ALIAS("platform:uartlite");
 604
 605 static struct platform_driver ulite_platform_driver = {
 606         .probe = ulite_probe,
 607         .remove = __devexit_p(ulite_remove),
 608         .driver = {
 609                 .owner = THIS_MODULE,
 610                 .name  = "uartlite",
 611                 .of_match_table = of_match_ptr(ulite_of_match),
 612         },
 613 };
 614
 615 /* ---------------------------------------------------------------------
 616  * Module setup/teardown
 617  */
 618
 619 int __init ulite_init(void)
 620 {
 621         int ret;
 622
 623         pr_debug("uartlite: calling uart_register_driver()\n");
 624         ret = uart_register_driver(&ulite_uart_driver);
 625         if (ret)
 626                 goto err_uart;
 627
 628         pr_debug("uartlite: calling platform_driver_register()\n");
 629         ret = platform_driver_register(&ulite_platform_driver);
 630         if (ret)
 631                 goto err_plat;
 632
 633         return 0;
 634
 635 err_plat:
 636         uart_unregister_driver(&ulite_uart_driver);
 637 err_uart:
 638         printk(KERN_ERR "registering uartlite driver failed: err=%i", ret);
 639         return ret;
 640 }
 641
 642 void __exit ulite_exit(void)
 643 {
 644         platform_driver_unregister(&ulite_platform_driver);
 645         uart_unregister_driver(&ulite_uart_driver);
 646 }
 647
 648 module_init(ulite_init);
 649 module_exit(ulite_exit);
 650
 651 MODULE_AUTHOR("Peter Korsgaard <jacmet@sunsite.dk>");
 652 MODULE_DESCRIPTION("Xilinx uartlite serial driver");
 653 MODULE_LICENSE("GPL");