bcache: use (REQ_META|REQ_PRIO) to indicate bio for metadata

[linux/fpc-iii.git] / kernel / trace / trace_hwlat.c

// SPDX-License-Identifier: GPL-2.0
/*
 * trace_hwlatdetect.c - A simple Hardware Latency detector.
 *
 * Use this tracer to detect large system latencies induced by the behavior of
 * certain underlying system hardware or firmware, independent of Linux itself.
 * The code was developed originally to detect the presence of SMIs on Intel
 * and AMD systems, although there is no dependency upon x86 herein.
 *
 * The classical example usage of this tracer is in detecting the presence of
 * SMIs or System Management Interrupts on Intel and AMD systems. An SMI is a
 * somewhat special form of hardware interrupt spawned from earlier CPU debug
 * modes in which the (BIOS/EFI/etc.) firmware arranges for the South Bridge
 * LPC (or other device) to generate a special interrupt under certain
 * circumstances, for example, upon expiration of a special SMI timer device,
 * due to certain external thermal readings, on certain I/O address accesses,
 * and other situations. An SMI hits a special CPU pin, triggers a special
 * SMI mode (complete with special memory map), and the OS is unaware.
 *
 * Although certain hardware-inducing latencies are necessary (for example,
 * a modern system often requires an SMI handler for correct thermal control
 * and remote management) they can wreak havoc upon any OS-level performance
 * guarantees toward low-latency, especially when the OS is not even made
 * aware of the presence of these interrupts. For this reason, we need a
 * somewhat brute force mechanism to detect these interrupts. In this case,
 * we do it by hogging all of the CPU(s) for configurable timer intervals,
 * sampling the built-in CPU timer, looking for discontiguous readings.
 *
 * WARNING: This implementation necessarily introduces latencies. Therefore,
 *          you should NEVER use this tracer while running in a production
 *          environment requiring any kind of low-latency performance
 *          guarantee(s).
 *
 * Copyright (C) 2008-2009 Jon Masters, Red Hat, Inc. <jcm@redhat.com>
 * Copyright (C) 2013-2016 Steven Rostedt, Red Hat, Inc. <srostedt@redhat.com>
 *
 * Includes useful feedback from Clark Williams <clark@redhat.com>
 *
 */
#include <linux/kthread.h>
#include <linux/tracefs.h>
#include <linux/uaccess.h>
#include <linux/cpumask.h>
#include <linux/delay.h>
#include <linux/sched/clock.h>
#include "trace.h"

static struct trace_array       *hwlat_trace;

#define U64STR_SIZE             22                      /* 20 digits max */

#define BANNER                  "hwlat_detector: "
#define DEFAULT_SAMPLE_WINDOW   1000000                 /* 1s */
#define DEFAULT_SAMPLE_WIDTH    500000                  /* 0.5s */
#define DEFAULT_LAT_THRESHOLD   10                      /* 10us */

/* sampling thread*/
static struct task_struct *hwlat_kthread;

static struct dentry *hwlat_sample_width;       /* sample width us */
static struct dentry *hwlat_sample_window;      /* sample window us */

/* Save the previous tracing_thresh value */
static unsigned long save_tracing_thresh;

/* NMI timestamp counters */
static u64 nmi_ts_start;
static u64 nmi_total_ts;
static int nmi_count;
static int nmi_cpu;

/* Tells NMIs to call back to the hwlat tracer to record timestamps */
bool trace_hwlat_callback_enabled;

/* If the user changed threshold, remember it */
static u64 last_tracing_thresh = DEFAULT_LAT_THRESHOLD * NSEC_PER_USEC;

/* Individual latency samples are stored here when detected. */
struct hwlat_sample {
        u64                     seqnum;         /* unique sequence */
        u64                     duration;       /* delta */
        u64                     outer_duration; /* delta (outer loop) */
        u64                     nmi_total_ts;   /* Total time spent in NMIs */
        struct timespec64       timestamp;      /* wall time */
        int                     nmi_count;      /* # NMIs during this sample */
};

/* keep the global state somewhere. */
static struct hwlat_data {

        struct mutex lock;              /* protect changes */

        u64     count;                  /* total since reset */

        u64     sample_window;          /* total sampling window (on+off) */
        u64     sample_width;           /* active sampling portion of window */

} hwlat_data = {
        .sample_window          = DEFAULT_SAMPLE_WINDOW,
        .sample_width           = DEFAULT_SAMPLE_WIDTH,
};

static void trace_hwlat_sample(struct hwlat_sample *sample)
{
        struct trace_array *tr = hwlat_trace;
        struct trace_event_call *call = &event_hwlat;
        struct ring_buffer *buffer = tr->trace_buffer.buffer;
        struct ring_buffer_event *event;
        struct hwlat_entry *entry;
        unsigned long flags;
        int pc;

        pc = preempt_count();
        local_save_flags(flags);

        event = trace_buffer_lock_reserve(buffer, TRACE_HWLAT, sizeof(*entry),
                                          flags, pc);
        if (!event)
                return;
        entry   = ring_buffer_event_data(event);
        entry->seqnum                   = sample->seqnum;
        entry->duration                 = sample->duration;
        entry->outer_duration           = sample->outer_duration;
        entry->timestamp                = sample->timestamp;
        entry->nmi_total_ts             = sample->nmi_total_ts;
        entry->nmi_count                = sample->nmi_count;

        if (!call_filter_check_discard(call, entry, buffer, event))
                trace_buffer_unlock_commit_nostack(buffer, event);
}

/* Macros to encapsulate the time capturing infrastructure */
#define time_type       u64
#define time_get()      trace_clock_local()
#define time_to_us(x)   div_u64(x, 1000)
#define time_sub(a, b)  ((a) - (b))
#define init_time(a, b) (a = b)
#define time_u64(a)     a

void trace_hwlat_callback(bool enter)
{
        if (smp_processor_id() != nmi_cpu)
                return;

        /*
         * Currently trace_clock_local() calls sched_clock() and the
         * generic version is not NMI safe.
         */
        if (!IS_ENABLED(CONFIG_GENERIC_SCHED_CLOCK)) {
                if (enter)
                        nmi_ts_start = time_get();
                else
                        nmi_total_ts = time_get() - nmi_ts_start;
        }

        if (enter)
                nmi_count++;
}

/**
 * get_sample - sample the CPU TSC and look for likely hardware latencies
 *
 * Used to repeatedly capture the CPU TSC (or similar), looking for potential
 * hardware-induced latency. Called with interrupts disabled and with
 * hwlat_data.lock held.
 */
static int get_sample(void)
{
        struct trace_array *tr = hwlat_trace;
        time_type start, t1, t2, last_t2;
        s64 diff, total, last_total = 0;
        u64 sample = 0;
        u64 thresh = tracing_thresh;
        u64 outer_sample = 0;
        int ret = -1;

        do_div(thresh, NSEC_PER_USEC); /* modifies interval value */

        nmi_cpu = smp_processor_id();
        nmi_total_ts = 0;
        nmi_count = 0;
        /* Make sure NMIs see this first */
        barrier();

        trace_hwlat_callback_enabled = true;

        init_time(last_t2, 0);
        start = time_get(); /* start timestamp */

        do {

                t1 = time_get();        /* we'll look for a discontinuity */
                t2 = time_get();

                if (time_u64(last_t2)) {
                        /* Check the delta from outer loop (t2 to next t1) */
                        diff = time_to_us(time_sub(t1, last_t2));
                        /* This shouldn't happen */
                        if (diff < 0) {
                                pr_err(BANNER "time running backwards\n");
                                goto out;
                        }
                        if (diff > outer_sample)
                                outer_sample = diff;
                }
                last_t2 = t2;

                total = time_to_us(time_sub(t2, start)); /* sample width */

                /* Check for possible overflows */
                if (total < last_total) {
                        pr_err("Time total overflowed\n");
                        break;
                }
                last_total = total;

                /* This checks the inner loop (t1 to t2) */
                diff = time_to_us(time_sub(t2, t1));     /* current diff */

                /* This shouldn't happen */
                if (diff < 0) {
                        pr_err(BANNER "time running backwards\n");
                        goto out;
                }

                if (diff > sample)
                        sample = diff; /* only want highest value */

        } while (total <= hwlat_data.sample_width);

        barrier(); /* finish the above in the view for NMIs */
        trace_hwlat_callback_enabled = false;
        barrier(); /* Make sure nmi_total_ts is no longer updated */

        ret = 0;

        /* If we exceed the threshold value, we have found a hardware latency */
        if (sample > thresh || outer_sample > thresh) {
                struct hwlat_sample s;

                ret = 1;

                /* We read in microseconds */
                if (nmi_total_ts)
                        do_div(nmi_total_ts, NSEC_PER_USEC);

                hwlat_data.count++;
                s.seqnum = hwlat_data.count;
                s.duration = sample;
                s.outer_duration = outer_sample;
                ktime_get_real_ts64(&s.timestamp);
                s.nmi_total_ts = nmi_total_ts;
                s.nmi_count = nmi_count;
                trace_hwlat_sample(&s);

                /* Keep a running maximum ever recorded hardware latency */
                if (sample > tr->max_latency)
                        tr->max_latency = sample;
        }

out:
        return ret;
}

static struct cpumask save_cpumask;
static bool disable_migrate;

static void move_to_next_cpu(void)
{
        struct cpumask *current_mask = &save_cpumask;
        int next_cpu;

        if (disable_migrate)
                return;
        /*
         * If for some reason the user modifies the CPU affinity
         * of this thread, than stop migrating for the duration
         * of the current test.
         */
        if (!cpumask_equal(current_mask, &current->cpus_allowed))
                goto disable;

        get_online_cpus();
        cpumask_and(current_mask, cpu_online_mask, tracing_buffer_mask);
        next_cpu = cpumask_next(smp_processor_id(), current_mask);
        put_online_cpus();

        if (next_cpu >= nr_cpu_ids)
                next_cpu = cpumask_first(current_mask);

        if (next_cpu >= nr_cpu_ids) /* Shouldn't happen! */
                goto disable;

        cpumask_clear(current_mask);
        cpumask_set_cpu(next_cpu, current_mask);

        sched_setaffinity(0, current_mask);
        return;

 disable:
        disable_migrate = true;
}

/*
 * kthread_fn - The CPU time sampling/hardware latency detection kernel thread
 *
 * Used to periodically sample the CPU TSC via a call to get_sample. We
 * disable interrupts, which does (intentionally) introduce latency since we
 * need to ensure nothing else might be running (and thus preempting).
 * Obviously this should never be used in production environments.
 *
 * Executes one loop interaction on each CPU in tracing_cpumask sysfs file.
 */
static int kthread_fn(void *data)
{
        u64 interval;

        while (!kthread_should_stop()) {

                move_to_next_cpu();

                local_irq_disable();
                get_sample();
                local_irq_enable();

                mutex_lock(&hwlat_data.lock);
                interval = hwlat_data.sample_window - hwlat_data.sample_width;
                mutex_unlock(&hwlat_data.lock);

                do_div(interval, USEC_PER_MSEC); /* modifies interval value */

                /* Always sleep for at least 1ms */
                if (interval < 1)
                        interval = 1;

                if (msleep_interruptible(interval))
                        break;
        }

        return 0;
}

/**
 * start_kthread - Kick off the hardware latency sampling/detector kthread
 *
 * This starts the kernel thread that will sit and sample the CPU timestamp
 * counter (TSC or similar) and look for potential hardware latencies.
 */
static int start_kthread(struct trace_array *tr)
{
        struct cpumask *current_mask = &save_cpumask;
        struct task_struct *kthread;
        int next_cpu;

        if (WARN_ON(hwlat_kthread))
                return 0;

        /* Just pick the first CPU on first iteration */
        current_mask = &save_cpumask;
        get_online_cpus();
        cpumask_and(current_mask, cpu_online_mask, tracing_buffer_mask);
        put_online_cpus();
        next_cpu = cpumask_first(current_mask);

        kthread = kthread_create(kthread_fn, NULL, "hwlatd");
        if (IS_ERR(kthread)) {
                pr_err(BANNER "could not start sampling thread\n");
                return -ENOMEM;
        }

        cpumask_clear(current_mask);
        cpumask_set_cpu(next_cpu, current_mask);
        sched_setaffinity(kthread->pid, current_mask);

        hwlat_kthread = kthread;
        wake_up_process(kthread);

        return 0;
}

/**
 * stop_kthread - Inform the hardware latency samping/detector kthread to stop
 *
 * This kicks the running hardware latency sampling/detector kernel thread and
 * tells it to stop sampling now. Use this on unload and at system shutdown.
 */
static void stop_kthread(void)
{
        if (!hwlat_kthread)
                return;
        kthread_stop(hwlat_kthread);
        hwlat_kthread = NULL;
}

/*
 * hwlat_read - Wrapper read function for reading both window and width
 * @filp: The active open file structure
 * @ubuf: The userspace provided buffer to read value into
 * @cnt: The maximum number of bytes to read
 * @ppos: The current "file" position
 *
 * This function provides a generic read implementation for the global state
 * "hwlat_data" structure filesystem entries.
 */
static ssize_t hwlat_read(struct file *filp, char __user *ubuf,
                          size_t cnt, loff_t *ppos)
{
        char buf[U64STR_SIZE];
        u64 *entry = filp->private_data;
        u64 val;
        int len;

        if (!entry)
                return -EFAULT;

        if (cnt > sizeof(buf))
                cnt = sizeof(buf);

        val = *entry;

        len = snprintf(buf, sizeof(buf), "%llu\n", val);

        return simple_read_from_buffer(ubuf, cnt, ppos, buf, len);
}

/**
 * hwlat_width_write - Write function for "width" entry
 * @filp: The active open file structure
 * @ubuf: The user buffer that contains the value to write
 * @cnt: The maximum number of bytes to write to "file"
 * @ppos: The current position in @file
 *
 * This function provides a write implementation for the "width" interface
 * to the hardware latency detector. It can be used to configure
 * for how many us of the total window us we will actively sample for any
 * hardware-induced latency periods. Obviously, it is not possible to
 * sample constantly and have the system respond to a sample reader, or,
 * worse, without having the system appear to have gone out to lunch. It
 * is enforced that width is less that the total window size.
 */
static ssize_t
hwlat_width_write(struct file *filp, const char __user *ubuf,
                  size_t cnt, loff_t *ppos)
{
        u64 val;
        int err;

        err = kstrtoull_from_user(ubuf, cnt, 10, &val);
        if (err)
                return err;

        mutex_lock(&hwlat_data.lock);
        if (val < hwlat_data.sample_window)
                hwlat_data.sample_width = val;
        else
                err = -EINVAL;
        mutex_unlock(&hwlat_data.lock);

        if (err)
                return err;

        return cnt;
}

/**
 * hwlat_window_write - Write function for "window" entry
 * @filp: The active open file structure
 * @ubuf: The user buffer that contains the value to write
 * @cnt: The maximum number of bytes to write to "file"
 * @ppos: The current position in @file
 *
 * This function provides a write implementation for the "window" interface
 * to the hardware latency detetector. The window is the total time
 * in us that will be considered one sample period. Conceptually, windows
 * occur back-to-back and contain a sample width period during which
 * actual sampling occurs. Can be used to write a new total window size. It
 * is enfoced that any value written must be greater than the sample width
 * size, or an error results.
 */
static ssize_t
hwlat_window_write(struct file *filp, const char __user *ubuf,
                   size_t cnt, loff_t *ppos)
{
        u64 val;
        int err;

        err = kstrtoull_from_user(ubuf, cnt, 10, &val);
        if (err)
                return err;

        mutex_lock(&hwlat_data.lock);
        if (hwlat_data.sample_width < val)
                hwlat_data.sample_window = val;
        else
                err = -EINVAL;
        mutex_unlock(&hwlat_data.lock);

        if (err)
                return err;

        return cnt;
}

static const struct file_operations width_fops = {
        .open           = tracing_open_generic,
        .read           = hwlat_read,
        .write          = hwlat_width_write,
};

static const struct file_operations window_fops = {
        .open           = tracing_open_generic,
        .read           = hwlat_read,
        .write          = hwlat_window_write,
};

/**
 * init_tracefs - A function to initialize the tracefs interface files
 *
 * This function creates entries in tracefs for "hwlat_detector".
 * It creates the hwlat_detector directory in the tracing directory,
 * and within that directory is the count, width and window files to
 * change and view those values.
 */
static int init_tracefs(void)
{
        struct dentry *d_tracer;
        struct dentry *top_dir;

        d_tracer = tracing_init_dentry();
        if (IS_ERR(d_tracer))
                return -ENOMEM;

        top_dir = tracefs_create_dir("hwlat_detector", d_tracer);
        if (!top_dir)
                return -ENOMEM;

        hwlat_sample_window = tracefs_create_file("window", 0640,
                                                  top_dir,
                                                  &hwlat_data.sample_window,
                                                  &window_fops);
        if (!hwlat_sample_window)
                goto err;

        hwlat_sample_width = tracefs_create_file("width", 0644,
                                                 top_dir,
                                                 &hwlat_data.sample_width,
                                                 &width_fops);
        if (!hwlat_sample_width)
                goto err;

        return 0;

 err:
        tracefs_remove_recursive(top_dir);
        return -ENOMEM;
}

static void hwlat_tracer_start(struct trace_array *tr)
{
        int err;

        err = start_kthread(tr);
        if (err)
                pr_err(BANNER "Cannot start hwlat kthread\n");
}

static void hwlat_tracer_stop(struct trace_array *tr)
{
        stop_kthread();
}

static bool hwlat_busy;

static int hwlat_tracer_init(struct trace_array *tr)
{
        /* Only allow one instance to enable this */
        if (hwlat_busy)
                return -EBUSY;

        hwlat_trace = tr;

        disable_migrate = false;
        hwlat_data.count = 0;
        tr->max_latency = 0;
        save_tracing_thresh = tracing_thresh;

        /* tracing_thresh is in nsecs, we speak in usecs */
        if (!tracing_thresh)
                tracing_thresh = last_tracing_thresh;

        if (tracer_tracing_is_on(tr))
                hwlat_tracer_start(tr);

        hwlat_busy = true;

        return 0;
}

static void hwlat_tracer_reset(struct trace_array *tr)
{
        stop_kthread();

        /* the tracing threshold is static between runs */
        last_tracing_thresh = tracing_thresh;

        tracing_thresh = save_tracing_thresh;
        hwlat_busy = false;
}

static struct tracer hwlat_tracer __read_mostly =
{
        .name           = "hwlat",
        .init           = hwlat_tracer_init,
        .reset          = hwlat_tracer_reset,
        .start          = hwlat_tracer_start,
        .stop           = hwlat_tracer_stop,
        .allow_instances = true,
};

__init static int init_hwlat_tracer(void)
{
        int ret;

        mutex_init(&hwlat_data.lock);

        ret = register_tracer(&hwlat_tracer);
        if (ret)
                return ret;

        init_tracefs();

        return 0;
}
late_initcall(init_hwlat_tracer);