2 * Analog Devices SPI3 controller driver
4 * Copyright (c) 2013 Analog Devices Inc.
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
16 #include <linux/delay.h>
17 #include <linux/device.h>
18 #include <linux/dma-mapping.h>
19 #include <linux/errno.h>
20 #include <linux/gpio.h>
21 #include <linux/init.h>
22 #include <linux/interrupt.h>
24 #include <linux/ioport.h>
25 #include <linux/module.h>
26 #include <linux/platform_device.h>
27 #include <linux/slab.h>
28 #include <linux/spi/spi.h>
29 #include <linux/types.h>
31 #include <asm/bfin_spi3.h>
32 #include <asm/cacheflush.h>
34 #include <asm/portmux.h>
43 struct bfin_spi_master
;
45 struct bfin_spi_transfer_ops
{
46 void (*write
) (struct bfin_spi_master
*);
47 void (*read
) (struct bfin_spi_master
*);
48 void (*duplex
) (struct bfin_spi_master
*);
51 /* runtime info for spi master */
52 struct bfin_spi_master
{
53 /* SPI framework hookup */
54 struct spi_master
*master
;
56 /* Regs base of SPI controller */
57 struct bfin_spi_regs __iomem
*regs
;
59 /* Pin request list */
62 /* Message Transfer pump */
63 struct tasklet_struct pump_transfers
;
65 /* Current message transfer state info */
66 struct spi_message
*cur_msg
;
67 struct spi_transfer
*cur_transfer
;
68 struct bfin_spi_device
*cur_chip
;
69 unsigned transfer_len
;
80 dma_addr_t tx_dma_addr
;
81 dma_addr_t rx_dma_addr
;
82 unsigned long dummy_buffer
; /* used in unidirectional transfer */
83 unsigned long tx_dma_size
;
84 unsigned long rx_dma_size
;
88 /* store register value for suspend/resume */
93 enum bfin_spi_state state
;
95 const struct bfin_spi_transfer_ops
*ops
;
98 struct bfin_spi_device
{
104 u16 cs_chg_udelay
; /* Some devices require > 255usec delay */
106 u32 tx_dummy_val
; /* tx value for rx only transfer */
108 const struct bfin_spi_transfer_ops
*ops
;
111 static void bfin_spi_enable(struct bfin_spi_master
*drv_data
)
113 bfin_write_or(&drv_data
->regs
->control
, SPI_CTL_EN
);
116 static void bfin_spi_disable(struct bfin_spi_master
*drv_data
)
118 bfin_write_and(&drv_data
->regs
->control
, ~SPI_CTL_EN
);
121 /* Caculate the SPI_CLOCK register value based on input HZ */
122 static u32
hz_to_spi_clock(u32 sclk
, u32 speed_hz
)
124 u32 spi_clock
= sclk
/ speed_hz
;
131 static int bfin_spi_flush(struct bfin_spi_master
*drv_data
)
133 unsigned long limit
= loops_per_jiffy
<< 1;
135 /* wait for stop and clear stat */
136 while (!(bfin_read(&drv_data
->regs
->status
) & SPI_STAT_SPIF
) && --limit
)
139 bfin_write(&drv_data
->regs
->status
, 0xFFFFFFFF);
144 /* Chip select operation functions for cs_change flag */
145 static void bfin_spi_cs_active(struct bfin_spi_master
*drv_data
, struct bfin_spi_device
*chip
)
147 if (likely(chip
->cs
< MAX_CTRL_CS
))
148 bfin_write_and(&drv_data
->regs
->ssel
, ~chip
->ssel
);
150 gpio_set_value(chip
->cs_gpio
, 0);
153 static void bfin_spi_cs_deactive(struct bfin_spi_master
*drv_data
,
154 struct bfin_spi_device
*chip
)
156 if (likely(chip
->cs
< MAX_CTRL_CS
))
157 bfin_write_or(&drv_data
->regs
->ssel
, chip
->ssel
);
159 gpio_set_value(chip
->cs_gpio
, 1);
161 /* Move delay here for consistency */
162 if (chip
->cs_chg_udelay
)
163 udelay(chip
->cs_chg_udelay
);
166 /* enable or disable the pin muxed by GPIO and SPI CS to work as SPI CS */
167 static inline void bfin_spi_cs_enable(struct bfin_spi_master
*drv_data
,
168 struct bfin_spi_device
*chip
)
170 if (chip
->cs
< MAX_CTRL_CS
)
171 bfin_write_or(&drv_data
->regs
->ssel
, chip
->ssel
>> 8);
174 static inline void bfin_spi_cs_disable(struct bfin_spi_master
*drv_data
,
175 struct bfin_spi_device
*chip
)
177 if (chip
->cs
< MAX_CTRL_CS
)
178 bfin_write_and(&drv_data
->regs
->ssel
, ~(chip
->ssel
>> 8));
181 /* stop controller and re-config current chip*/
182 static void bfin_spi_restore_state(struct bfin_spi_master
*drv_data
)
184 struct bfin_spi_device
*chip
= drv_data
->cur_chip
;
186 /* Clear status and disable clock */
187 bfin_write(&drv_data
->regs
->status
, 0xFFFFFFFF);
188 bfin_write(&drv_data
->regs
->rx_control
, 0x0);
189 bfin_write(&drv_data
->regs
->tx_control
, 0x0);
190 bfin_spi_disable(drv_data
);
194 /* Load the registers */
195 bfin_write(&drv_data
->regs
->control
, chip
->control
);
196 bfin_write(&drv_data
->regs
->clock
, chip
->clock
);
198 bfin_spi_enable(drv_data
);
199 drv_data
->tx_num
= drv_data
->rx_num
= 0;
200 /* we always choose tx transfer initiate */
201 bfin_write(&drv_data
->regs
->rx_control
, SPI_RXCTL_REN
);
202 bfin_write(&drv_data
->regs
->tx_control
,
203 SPI_TXCTL_TEN
| SPI_TXCTL_TTI
);
204 bfin_spi_cs_active(drv_data
, chip
);
207 /* discard invalid rx data and empty rfifo */
208 static inline void dummy_read(struct bfin_spi_master
*drv_data
)
210 while (!(bfin_read(&drv_data
->regs
->status
) & SPI_STAT_RFE
))
211 bfin_read(&drv_data
->regs
->rfifo
);
214 static void bfin_spi_u8_write(struct bfin_spi_master
*drv_data
)
216 dummy_read(drv_data
);
217 while (drv_data
->tx
< drv_data
->tx_end
) {
218 bfin_write(&drv_data
->regs
->tfifo
, (*(u8
*)(drv_data
->tx
++)));
219 while (bfin_read(&drv_data
->regs
->status
) & SPI_STAT_RFE
)
221 bfin_read(&drv_data
->regs
->rfifo
);
225 static void bfin_spi_u8_read(struct bfin_spi_master
*drv_data
)
227 u32 tx_val
= drv_data
->cur_chip
->tx_dummy_val
;
229 dummy_read(drv_data
);
230 while (drv_data
->rx
< drv_data
->rx_end
) {
231 bfin_write(&drv_data
->regs
->tfifo
, tx_val
);
232 while (bfin_read(&drv_data
->regs
->status
) & SPI_STAT_RFE
)
234 *(u8
*)(drv_data
->rx
++) = bfin_read(&drv_data
->regs
->rfifo
);
238 static void bfin_spi_u8_duplex(struct bfin_spi_master
*drv_data
)
240 dummy_read(drv_data
);
241 while (drv_data
->rx
< drv_data
->rx_end
) {
242 bfin_write(&drv_data
->regs
->tfifo
, (*(u8
*)(drv_data
->tx
++)));
243 while (bfin_read(&drv_data
->regs
->status
) & SPI_STAT_RFE
)
245 *(u8
*)(drv_data
->rx
++) = bfin_read(&drv_data
->regs
->rfifo
);
249 static const struct bfin_spi_transfer_ops bfin_bfin_spi_transfer_ops_u8
= {
250 .write
= bfin_spi_u8_write
,
251 .read
= bfin_spi_u8_read
,
252 .duplex
= bfin_spi_u8_duplex
,
255 static void bfin_spi_u16_write(struct bfin_spi_master
*drv_data
)
257 dummy_read(drv_data
);
258 while (drv_data
->tx
< drv_data
->tx_end
) {
259 bfin_write(&drv_data
->regs
->tfifo
, (*(u16
*)drv_data
->tx
));
261 while (bfin_read(&drv_data
->regs
->status
) & SPI_STAT_RFE
)
263 bfin_read(&drv_data
->regs
->rfifo
);
267 static void bfin_spi_u16_read(struct bfin_spi_master
*drv_data
)
269 u32 tx_val
= drv_data
->cur_chip
->tx_dummy_val
;
271 dummy_read(drv_data
);
272 while (drv_data
->rx
< drv_data
->rx_end
) {
273 bfin_write(&drv_data
->regs
->tfifo
, tx_val
);
274 while (bfin_read(&drv_data
->regs
->status
) & SPI_STAT_RFE
)
276 *(u16
*)drv_data
->rx
= bfin_read(&drv_data
->regs
->rfifo
);
281 static void bfin_spi_u16_duplex(struct bfin_spi_master
*drv_data
)
283 dummy_read(drv_data
);
284 while (drv_data
->rx
< drv_data
->rx_end
) {
285 bfin_write(&drv_data
->regs
->tfifo
, (*(u16
*)drv_data
->tx
));
287 while (bfin_read(&drv_data
->regs
->status
) & SPI_STAT_RFE
)
289 *(u16
*)drv_data
->rx
= bfin_read(&drv_data
->regs
->rfifo
);
294 static const struct bfin_spi_transfer_ops bfin_bfin_spi_transfer_ops_u16
= {
295 .write
= bfin_spi_u16_write
,
296 .read
= bfin_spi_u16_read
,
297 .duplex
= bfin_spi_u16_duplex
,
300 static void bfin_spi_u32_write(struct bfin_spi_master
*drv_data
)
302 dummy_read(drv_data
);
303 while (drv_data
->tx
< drv_data
->tx_end
) {
304 bfin_write(&drv_data
->regs
->tfifo
, (*(u32
*)drv_data
->tx
));
306 while (bfin_read(&drv_data
->regs
->status
) & SPI_STAT_RFE
)
308 bfin_read(&drv_data
->regs
->rfifo
);
312 static void bfin_spi_u32_read(struct bfin_spi_master
*drv_data
)
314 u32 tx_val
= drv_data
->cur_chip
->tx_dummy_val
;
316 dummy_read(drv_data
);
317 while (drv_data
->rx
< drv_data
->rx_end
) {
318 bfin_write(&drv_data
->regs
->tfifo
, tx_val
);
319 while (bfin_read(&drv_data
->regs
->status
) & SPI_STAT_RFE
)
321 *(u32
*)drv_data
->rx
= bfin_read(&drv_data
->regs
->rfifo
);
326 static void bfin_spi_u32_duplex(struct bfin_spi_master
*drv_data
)
328 dummy_read(drv_data
);
329 while (drv_data
->rx
< drv_data
->rx_end
) {
330 bfin_write(&drv_data
->regs
->tfifo
, (*(u32
*)drv_data
->tx
));
332 while (bfin_read(&drv_data
->regs
->status
) & SPI_STAT_RFE
)
334 *(u32
*)drv_data
->rx
= bfin_read(&drv_data
->regs
->rfifo
);
339 static const struct bfin_spi_transfer_ops bfin_bfin_spi_transfer_ops_u32
= {
340 .write
= bfin_spi_u32_write
,
341 .read
= bfin_spi_u32_read
,
342 .duplex
= bfin_spi_u32_duplex
,
346 /* test if there is more transfer to be done */
347 static void bfin_spi_next_transfer(struct bfin_spi_master
*drv
)
349 struct spi_message
*msg
= drv
->cur_msg
;
350 struct spi_transfer
*t
= drv
->cur_transfer
;
352 /* Move to next transfer */
353 if (t
->transfer_list
.next
!= &msg
->transfers
) {
354 drv
->cur_transfer
= list_entry(t
->transfer_list
.next
,
355 struct spi_transfer
, transfer_list
);
356 drv
->state
= RUNNING_STATE
;
358 drv
->state
= DONE_STATE
;
359 drv
->cur_transfer
= NULL
;
363 static void bfin_spi_giveback(struct bfin_spi_master
*drv_data
)
365 struct bfin_spi_device
*chip
= drv_data
->cur_chip
;
367 bfin_spi_cs_deactive(drv_data
, chip
);
368 spi_finalize_current_message(drv_data
->master
);
371 static int bfin_spi_setup_transfer(struct bfin_spi_master
*drv
)
373 struct spi_transfer
*t
= drv
->cur_transfer
;
377 drv
->tx
= (void *)t
->tx_buf
;
378 drv
->tx_end
= drv
->tx
+ t
->len
;
385 drv
->rx_end
= drv
->rx
+ t
->len
;
390 drv
->transfer_len
= t
->len
;
392 /* bits per word setup */
393 switch (t
->bits_per_word
) {
395 cr_width
= SPI_CTL_SIZE08
;
396 drv
->ops
= &bfin_bfin_spi_transfer_ops_u8
;
399 cr_width
= SPI_CTL_SIZE16
;
400 drv
->ops
= &bfin_bfin_spi_transfer_ops_u16
;
403 cr_width
= SPI_CTL_SIZE32
;
404 drv
->ops
= &bfin_bfin_spi_transfer_ops_u32
;
409 cr
= bfin_read(&drv
->regs
->control
) & ~SPI_CTL_SIZE
;
411 bfin_write(&drv
->regs
->control
, cr
);
414 bfin_write(&drv
->regs
->clock
,
415 hz_to_spi_clock(drv
->sclk
, t
->speed_hz
));
419 static int bfin_spi_dma_xfer(struct bfin_spi_master
*drv_data
)
421 struct spi_transfer
*t
= drv_data
->cur_transfer
;
422 struct spi_message
*msg
= drv_data
->cur_msg
;
423 struct bfin_spi_device
*chip
= drv_data
->cur_chip
;
425 unsigned long word_count
, word_size
;
426 void *tx_buf
, *rx_buf
;
428 switch (t
->bits_per_word
) {
430 dma_config
= WDSIZE_8
| PSIZE_8
;
431 word_count
= drv_data
->transfer_len
;
435 dma_config
= WDSIZE_16
| PSIZE_16
;
436 word_count
= drv_data
->transfer_len
/ 2;
440 dma_config
= WDSIZE_32
| PSIZE_32
;
441 word_count
= drv_data
->transfer_len
/ 4;
447 tx_buf
= drv_data
->tx
;
448 rx_buf
= &drv_data
->dummy_buffer
;
449 drv_data
->tx_dma_size
= drv_data
->transfer_len
;
450 drv_data
->rx_dma_size
= sizeof(drv_data
->dummy_buffer
);
451 set_dma_x_modify(drv_data
->tx_dma
, word_size
);
452 set_dma_x_modify(drv_data
->rx_dma
, 0);
453 } else if (!drv_data
->tx
) {
454 drv_data
->dummy_buffer
= chip
->tx_dummy_val
;
455 tx_buf
= &drv_data
->dummy_buffer
;
456 rx_buf
= drv_data
->rx
;
457 drv_data
->tx_dma_size
= sizeof(drv_data
->dummy_buffer
);
458 drv_data
->rx_dma_size
= drv_data
->transfer_len
;
459 set_dma_x_modify(drv_data
->tx_dma
, 0);
460 set_dma_x_modify(drv_data
->rx_dma
, word_size
);
462 tx_buf
= drv_data
->tx
;
463 rx_buf
= drv_data
->rx
;
464 drv_data
->tx_dma_size
= drv_data
->rx_dma_size
465 = drv_data
->transfer_len
;
466 set_dma_x_modify(drv_data
->tx_dma
, word_size
);
467 set_dma_x_modify(drv_data
->rx_dma
, word_size
);
470 drv_data
->tx_dma_addr
= dma_map_single(&msg
->spi
->dev
,
472 drv_data
->tx_dma_size
,
474 if (dma_mapping_error(&msg
->spi
->dev
,
475 drv_data
->tx_dma_addr
))
478 drv_data
->rx_dma_addr
= dma_map_single(&msg
->spi
->dev
,
480 drv_data
->rx_dma_size
,
482 if (dma_mapping_error(&msg
->spi
->dev
,
483 drv_data
->rx_dma_addr
)) {
484 dma_unmap_single(&msg
->spi
->dev
,
485 drv_data
->tx_dma_addr
,
486 drv_data
->tx_dma_size
,
491 dummy_read(drv_data
);
492 set_dma_x_count(drv_data
->tx_dma
, word_count
);
493 set_dma_x_count(drv_data
->rx_dma
, word_count
);
494 set_dma_start_addr(drv_data
->tx_dma
, drv_data
->tx_dma_addr
);
495 set_dma_start_addr(drv_data
->rx_dma
, drv_data
->rx_dma_addr
);
496 dma_config
|= DMAFLOW_STOP
| RESTART
| DI_EN
;
497 set_dma_config(drv_data
->tx_dma
, dma_config
);
498 set_dma_config(drv_data
->rx_dma
, dma_config
| WNR
);
499 enable_dma(drv_data
->tx_dma
);
500 enable_dma(drv_data
->rx_dma
);
503 bfin_write(&drv_data
->regs
->rx_control
, SPI_RXCTL_REN
| SPI_RXCTL_RDR_NE
);
505 bfin_write(&drv_data
->regs
->tx_control
,
506 SPI_TXCTL_TEN
| SPI_TXCTL_TTI
| SPI_TXCTL_TDR_NF
);
511 static int bfin_spi_pio_xfer(struct bfin_spi_master
*drv_data
)
513 struct spi_message
*msg
= drv_data
->cur_msg
;
516 /* write only half duplex */
517 drv_data
->ops
->write(drv_data
);
518 if (drv_data
->tx
!= drv_data
->tx_end
)
520 } else if (!drv_data
->tx
) {
521 /* read only half duplex */
522 drv_data
->ops
->read(drv_data
);
523 if (drv_data
->rx
!= drv_data
->rx_end
)
526 /* full duplex mode */
527 drv_data
->ops
->duplex(drv_data
);
528 if (drv_data
->tx
!= drv_data
->tx_end
)
532 if (!bfin_spi_flush(drv_data
))
534 msg
->actual_length
+= drv_data
->transfer_len
;
535 tasklet_schedule(&drv_data
->pump_transfers
);
539 static void bfin_spi_pump_transfers(unsigned long data
)
541 struct bfin_spi_master
*drv_data
= (struct bfin_spi_master
*)data
;
542 struct spi_message
*msg
= NULL
;
543 struct spi_transfer
*t
= NULL
;
544 struct bfin_spi_device
*chip
= NULL
;
547 /* Get current state information */
548 msg
= drv_data
->cur_msg
;
549 t
= drv_data
->cur_transfer
;
550 chip
= drv_data
->cur_chip
;
552 /* Handle for abort */
553 if (drv_data
->state
== ERROR_STATE
) {
555 bfin_spi_giveback(drv_data
);
559 if (drv_data
->state
== RUNNING_STATE
) {
561 udelay(t
->delay_usecs
);
563 bfin_spi_cs_deactive(drv_data
, chip
);
564 bfin_spi_next_transfer(drv_data
);
565 t
= drv_data
->cur_transfer
;
567 /* Handle end of message */
568 if (drv_data
->state
== DONE_STATE
) {
570 bfin_spi_giveback(drv_data
);
574 if ((t
->len
== 0) || (t
->tx_buf
== NULL
&& t
->rx_buf
== NULL
)) {
575 /* Schedule next transfer tasklet */
576 tasklet_schedule(&drv_data
->pump_transfers
);
580 ret
= bfin_spi_setup_transfer(drv_data
);
583 bfin_spi_giveback(drv_data
);
586 bfin_write(&drv_data
->regs
->status
, 0xFFFFFFFF);
587 bfin_spi_cs_active(drv_data
, chip
);
588 drv_data
->state
= RUNNING_STATE
;
590 if (chip
->enable_dma
)
591 ret
= bfin_spi_dma_xfer(drv_data
);
593 ret
= bfin_spi_pio_xfer(drv_data
);
596 bfin_spi_giveback(drv_data
);
600 static int bfin_spi_transfer_one_message(struct spi_master
*master
,
601 struct spi_message
*m
)
603 struct bfin_spi_master
*drv_data
= spi_master_get_devdata(master
);
605 drv_data
->cur_msg
= m
;
606 drv_data
->cur_chip
= spi_get_ctldata(drv_data
->cur_msg
->spi
);
607 bfin_spi_restore_state(drv_data
);
609 drv_data
->state
= START_STATE
;
610 drv_data
->cur_transfer
= list_entry(drv_data
->cur_msg
->transfers
.next
,
611 struct spi_transfer
, transfer_list
);
613 tasklet_schedule(&drv_data
->pump_transfers
);
617 #define MAX_SPI_SSEL 7
619 static const u16 ssel
[][MAX_SPI_SSEL
] = {
620 {P_SPI0_SSEL1
, P_SPI0_SSEL2
, P_SPI0_SSEL3
,
621 P_SPI0_SSEL4
, P_SPI0_SSEL5
,
622 P_SPI0_SSEL6
, P_SPI0_SSEL7
},
624 {P_SPI1_SSEL1
, P_SPI1_SSEL2
, P_SPI1_SSEL3
,
625 P_SPI1_SSEL4
, P_SPI1_SSEL5
,
626 P_SPI1_SSEL6
, P_SPI1_SSEL7
},
628 {P_SPI2_SSEL1
, P_SPI2_SSEL2
, P_SPI2_SSEL3
,
629 P_SPI2_SSEL4
, P_SPI2_SSEL5
,
630 P_SPI2_SSEL6
, P_SPI2_SSEL7
},
633 static int bfin_spi_setup(struct spi_device
*spi
)
635 struct bfin_spi_master
*drv_data
= spi_master_get_devdata(spi
->master
);
636 struct bfin_spi_device
*chip
= spi_get_ctldata(spi
);
637 u32 bfin_ctl_reg
= SPI_CTL_ODM
| SPI_CTL_PSSE
;
641 struct bfin_spi3_chip
*chip_info
= spi
->controller_data
;
643 chip
= kzalloc(sizeof(*chip
), GFP_KERNEL
);
645 dev_err(&spi
->dev
, "can not allocate chip data\n");
649 if (chip_info
->control
& ~bfin_ctl_reg
) {
651 "do not set bits that the SPI framework manages\n");
654 chip
->control
= chip_info
->control
;
655 chip
->cs_chg_udelay
= chip_info
->cs_chg_udelay
;
656 chip
->tx_dummy_val
= chip_info
->tx_dummy_val
;
657 chip
->enable_dma
= chip_info
->enable_dma
;
659 chip
->cs
= spi
->chip_select
;
660 if (chip
->cs
< MAX_CTRL_CS
) {
661 chip
->ssel
= (1 << chip
->cs
) << 8;
662 ret
= peripheral_request(ssel
[spi
->master
->bus_num
]
663 [chip
->cs
-1], dev_name(&spi
->dev
));
665 dev_err(&spi
->dev
, "peripheral_request() error\n");
669 chip
->cs_gpio
= chip
->cs
- MAX_CTRL_CS
;
670 ret
= gpio_request_one(chip
->cs_gpio
, GPIOF_OUT_INIT_HIGH
,
671 dev_name(&spi
->dev
));
673 dev_err(&spi
->dev
, "gpio_request_one() error\n");
677 spi_set_ctldata(spi
, chip
);
680 /* force a default base state */
681 chip
->control
&= bfin_ctl_reg
;
683 if (spi
->mode
& SPI_CPOL
)
684 chip
->control
|= SPI_CTL_CPOL
;
685 if (spi
->mode
& SPI_CPHA
)
686 chip
->control
|= SPI_CTL_CPHA
;
687 if (spi
->mode
& SPI_LSB_FIRST
)
688 chip
->control
|= SPI_CTL_LSBF
;
689 chip
->control
|= SPI_CTL_MSTR
;
690 /* we choose software to controll cs */
691 chip
->control
&= ~SPI_CTL_ASSEL
;
693 chip
->clock
= hz_to_spi_clock(drv_data
->sclk
, spi
->max_speed_hz
);
695 bfin_spi_cs_enable(drv_data
, chip
);
696 bfin_spi_cs_deactive(drv_data
, chip
);
702 spi_set_ctldata(spi
, NULL
);
708 static void bfin_spi_cleanup(struct spi_device
*spi
)
710 struct bfin_spi_device
*chip
= spi_get_ctldata(spi
);
711 struct bfin_spi_master
*drv_data
= spi_master_get_devdata(spi
->master
);
716 if (chip
->cs
< MAX_CTRL_CS
) {
717 peripheral_free(ssel
[spi
->master
->bus_num
]
719 bfin_spi_cs_disable(drv_data
, chip
);
721 gpio_free(chip
->cs_gpio
);
725 spi_set_ctldata(spi
, NULL
);
728 static irqreturn_t
bfin_spi_tx_dma_isr(int irq
, void *dev_id
)
730 struct bfin_spi_master
*drv_data
= dev_id
;
731 u32 dma_stat
= get_dma_curr_irqstat(drv_data
->tx_dma
);
733 clear_dma_irqstat(drv_data
->tx_dma
);
734 if (dma_stat
& DMA_DONE
) {
737 dev_err(&drv_data
->master
->dev
,
738 "spi tx dma error: %d\n", dma_stat
);
740 drv_data
->state
= ERROR_STATE
;
742 bfin_write_and(&drv_data
->regs
->tx_control
, ~SPI_TXCTL_TDR_NF
);
746 static irqreturn_t
bfin_spi_rx_dma_isr(int irq
, void *dev_id
)
748 struct bfin_spi_master
*drv_data
= dev_id
;
749 struct spi_message
*msg
= drv_data
->cur_msg
;
750 u32 dma_stat
= get_dma_curr_irqstat(drv_data
->rx_dma
);
752 clear_dma_irqstat(drv_data
->rx_dma
);
753 if (dma_stat
& DMA_DONE
) {
755 /* we may fail on tx dma */
756 if (drv_data
->state
!= ERROR_STATE
)
757 msg
->actual_length
+= drv_data
->transfer_len
;
759 drv_data
->state
= ERROR_STATE
;
760 dev_err(&drv_data
->master
->dev
,
761 "spi rx dma error: %d\n", dma_stat
);
763 bfin_write(&drv_data
->regs
->tx_control
, 0);
764 bfin_write(&drv_data
->regs
->rx_control
, 0);
765 if (drv_data
->rx_num
!= drv_data
->tx_num
)
766 dev_dbg(&drv_data
->master
->dev
,
767 "dma interrupt missing: tx=%d,rx=%d\n",
768 drv_data
->tx_num
, drv_data
->rx_num
);
769 tasklet_schedule(&drv_data
->pump_transfers
);
773 static int bfin_spi_probe(struct platform_device
*pdev
)
775 struct device
*dev
= &pdev
->dev
;
776 struct bfin_spi3_master
*info
= dev_get_platdata(dev
);
777 struct spi_master
*master
;
778 struct bfin_spi_master
*drv_data
;
779 struct resource
*mem
, *res
;
780 unsigned int tx_dma
, rx_dma
;
785 dev_err(dev
, "platform data missing!\n");
791 dev_err(dev
, "can not get sclk1\n");
795 res
= platform_get_resource(pdev
, IORESOURCE_DMA
, 0);
797 dev_err(dev
, "can not get tx dma resource\n");
802 res
= platform_get_resource(pdev
, IORESOURCE_DMA
, 1);
804 dev_err(dev
, "can not get rx dma resource\n");
809 /* allocate master with space for drv_data */
810 master
= spi_alloc_master(dev
, sizeof(*drv_data
));
812 dev_err(dev
, "can not alloc spi_master\n");
815 platform_set_drvdata(pdev
, master
);
817 /* the mode bits supported by this driver */
818 master
->mode_bits
= SPI_CPOL
| SPI_CPHA
| SPI_LSB_FIRST
;
820 master
->bus_num
= pdev
->id
;
821 master
->num_chipselect
= info
->num_chipselect
;
822 master
->cleanup
= bfin_spi_cleanup
;
823 master
->setup
= bfin_spi_setup
;
824 master
->transfer_one_message
= bfin_spi_transfer_one_message
;
825 master
->bits_per_word_mask
= BIT(32 - 1) | BIT(16 - 1) | BIT(8 - 1);
827 drv_data
= spi_master_get_devdata(master
);
828 drv_data
->master
= master
;
829 drv_data
->tx_dma
= tx_dma
;
830 drv_data
->rx_dma
= rx_dma
;
831 drv_data
->pin_req
= info
->pin_req
;
832 drv_data
->sclk
= sclk
;
834 mem
= platform_get_resource(pdev
, IORESOURCE_MEM
, 0);
835 drv_data
->regs
= devm_ioremap_resource(dev
, mem
);
836 if (IS_ERR(drv_data
->regs
)) {
837 ret
= PTR_ERR(drv_data
->regs
);
841 /* request tx and rx dma */
842 ret
= request_dma(tx_dma
, "SPI_TX_DMA");
844 dev_err(dev
, "can not request SPI TX DMA channel\n");
847 set_dma_callback(tx_dma
, bfin_spi_tx_dma_isr
, drv_data
);
849 ret
= request_dma(rx_dma
, "SPI_RX_DMA");
851 dev_err(dev
, "can not request SPI RX DMA channel\n");
852 goto err_free_tx_dma
;
854 set_dma_callback(drv_data
->rx_dma
, bfin_spi_rx_dma_isr
, drv_data
);
856 /* request CLK, MOSI and MISO */
857 ret
= peripheral_request_list(drv_data
->pin_req
, "bfin-spi3");
859 dev_err(dev
, "can not request spi pins\n");
860 goto err_free_rx_dma
;
863 bfin_write(&drv_data
->regs
->control
, SPI_CTL_MSTR
| SPI_CTL_CPHA
);
864 bfin_write(&drv_data
->regs
->ssel
, 0x0000FE00);
865 bfin_write(&drv_data
->regs
->delay
, 0x0);
867 tasklet_init(&drv_data
->pump_transfers
,
868 bfin_spi_pump_transfers
, (unsigned long)drv_data
);
869 /* register with the SPI framework */
870 ret
= spi_register_master(master
);
872 dev_err(dev
, "can not register spi master\n");
873 goto err_free_peripheral
;
879 peripheral_free_list(drv_data
->pin_req
);
885 spi_master_put(master
);
890 static int bfin_spi_remove(struct platform_device
*pdev
)
892 struct spi_master
*master
= platform_get_drvdata(pdev
);
893 struct bfin_spi_master
*drv_data
= spi_master_get_devdata(master
);
895 bfin_spi_disable(drv_data
);
897 peripheral_free_list(drv_data
->pin_req
);
898 free_dma(drv_data
->rx_dma
);
899 free_dma(drv_data
->tx_dma
);
901 spi_unregister_master(drv_data
->master
);
906 static int bfin_spi_suspend(struct device
*dev
)
908 struct spi_master
*master
= dev_get_drvdata(dev
);
909 struct bfin_spi_master
*drv_data
= spi_master_get_devdata(master
);
911 spi_master_suspend(master
);
913 drv_data
->control
= bfin_read(&drv_data
->regs
->control
);
914 drv_data
->ssel
= bfin_read(&drv_data
->regs
->ssel
);
916 bfin_write(&drv_data
->regs
->control
, SPI_CTL_MSTR
| SPI_CTL_CPHA
);
917 bfin_write(&drv_data
->regs
->ssel
, 0x0000FE00);
918 dma_disable_irq(drv_data
->rx_dma
);
919 dma_disable_irq(drv_data
->tx_dma
);
924 static int bfin_spi_resume(struct device
*dev
)
926 struct spi_master
*master
= dev_get_drvdata(dev
);
927 struct bfin_spi_master
*drv_data
= spi_master_get_devdata(master
);
930 /* bootrom may modify spi and dma status when resume in spi boot mode */
931 disable_dma(drv_data
->rx_dma
);
933 dma_enable_irq(drv_data
->rx_dma
);
934 dma_enable_irq(drv_data
->tx_dma
);
935 bfin_write(&drv_data
->regs
->control
, drv_data
->control
);
936 bfin_write(&drv_data
->regs
->ssel
, drv_data
->ssel
);
938 ret
= spi_master_resume(master
);
940 free_dma(drv_data
->rx_dma
);
941 free_dma(drv_data
->tx_dma
);
947 static const struct dev_pm_ops bfin_spi_pm_ops
= {
948 SET_SYSTEM_SLEEP_PM_OPS(bfin_spi_suspend
, bfin_spi_resume
)
951 MODULE_ALIAS("platform:bfin-spi3");
952 static struct platform_driver bfin_spi_driver
= {
955 .owner
= THIS_MODULE
,
956 .pm
= &bfin_spi_pm_ops
,
958 .remove
= bfin_spi_remove
,
961 module_platform_driver_probe(bfin_spi_driver
, bfin_spi_probe
);
963 MODULE_DESCRIPTION("Analog Devices SPI3 controller driver");
964 MODULE_AUTHOR("Scott Jiang <Scott.Jiang.Linux@gmail.com>");
965 MODULE_LICENSE("GPL v2");