2 * SPI bus driver for the Topcliff PCH used by Intel SoCs
4 * Copyright (C) 2011 LAPIS Semiconductor Co., Ltd.
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; version 2 of the License.
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
20 #include <linux/delay.h>
21 #include <linux/pci.h>
22 #include <linux/wait.h>
23 #include <linux/spi/spi.h>
24 #include <linux/interrupt.h>
25 #include <linux/sched.h>
26 #include <linux/spi/spidev.h>
27 #include <linux/module.h>
28 #include <linux/device.h>
29 #include <linux/platform_device.h>
31 #include <linux/dmaengine.h>
32 #include <linux/pch_dma.h>
34 /* Register offsets */
35 #define PCH_SPCR 0x00 /* SPI control register */
36 #define PCH_SPBRR 0x04 /* SPI baud rate register */
37 #define PCH_SPSR 0x08 /* SPI status register */
38 #define PCH_SPDWR 0x0C /* SPI write data register */
39 #define PCH_SPDRR 0x10 /* SPI read data register */
40 #define PCH_SSNXCR 0x18 /* SSN Expand Control Register */
41 #define PCH_SRST 0x1C /* SPI reset register */
42 #define PCH_ADDRESS_SIZE 0x20
44 #define PCH_SPSR_TFD 0x000007C0
45 #define PCH_SPSR_RFD 0x0000F800
47 #define PCH_READABLE(x) (((x) & PCH_SPSR_RFD)>>11)
48 #define PCH_WRITABLE(x) (((x) & PCH_SPSR_TFD)>>6)
50 #define PCH_RX_THOLD 7
51 #define PCH_RX_THOLD_MAX 15
53 #define PCH_TX_THOLD 2
55 #define PCH_MAX_BAUDRATE 5000000
56 #define PCH_MAX_FIFO_DEPTH 16
58 #define STATUS_RUNNING 1
59 #define STATUS_EXITING 2
60 #define PCH_SLEEP_TIME 10
63 #define SSN_HIGH 0x03U
64 #define SSN_NO_CONTROL 0x00U
65 #define PCH_MAX_CS 0xFF
66 #define PCI_DEVICE_ID_GE_SPI 0x8816
68 #define SPCR_SPE_BIT (1 << 0)
69 #define SPCR_MSTR_BIT (1 << 1)
70 #define SPCR_LSBF_BIT (1 << 4)
71 #define SPCR_CPHA_BIT (1 << 5)
72 #define SPCR_CPOL_BIT (1 << 6)
73 #define SPCR_TFIE_BIT (1 << 8)
74 #define SPCR_RFIE_BIT (1 << 9)
75 #define SPCR_FIE_BIT (1 << 10)
76 #define SPCR_ORIE_BIT (1 << 11)
77 #define SPCR_MDFIE_BIT (1 << 12)
78 #define SPCR_FICLR_BIT (1 << 24)
79 #define SPSR_TFI_BIT (1 << 0)
80 #define SPSR_RFI_BIT (1 << 1)
81 #define SPSR_FI_BIT (1 << 2)
82 #define SPSR_ORF_BIT (1 << 3)
83 #define SPBRR_SIZE_BIT (1 << 10)
85 #define PCH_ALL (SPCR_TFIE_BIT|SPCR_RFIE_BIT|SPCR_FIE_BIT|\
86 SPCR_ORIE_BIT|SPCR_MDFIE_BIT)
88 #define SPCR_RFIC_FIELD 20
89 #define SPCR_TFIC_FIELD 16
91 #define MASK_SPBRR_SPBR_BITS ((1 << 10) - 1)
92 #define MASK_RFIC_SPCR_BITS (0xf << SPCR_RFIC_FIELD)
93 #define MASK_TFIC_SPCR_BITS (0xf << SPCR_TFIC_FIELD)
95 #define PCH_CLOCK_HZ 50000000
96 #define PCH_MAX_SPBR 1023
98 /* Definition for ML7213/ML7223/ML7831 by LAPIS Semiconductor */
99 #define PCI_VENDOR_ID_ROHM 0x10DB
100 #define PCI_DEVICE_ID_ML7213_SPI 0x802c
101 #define PCI_DEVICE_ID_ML7223_SPI 0x800F
102 #define PCI_DEVICE_ID_ML7831_SPI 0x8816
105 * Set the number of SPI instance max
106 * Intel EG20T PCH : 1ch
107 * LAPIS Semiconductor ML7213 IOH : 2ch
108 * LAPIS Semiconductor ML7223 IOH : 1ch
109 * LAPIS Semiconductor ML7831 IOH : 1ch
111 #define PCH_SPI_MAX_DEV 2
113 #define PCH_BUF_SIZE 4096
114 #define PCH_DMA_TRANS_SIZE 12
116 static int use_dma
= 1;
118 struct pch_spi_dma_ctrl
{
119 struct dma_async_tx_descriptor
*desc_tx
;
120 struct dma_async_tx_descriptor
*desc_rx
;
121 struct pch_dma_slave param_tx
;
122 struct pch_dma_slave param_rx
;
123 struct dma_chan
*chan_tx
;
124 struct dma_chan
*chan_rx
;
125 struct scatterlist
*sg_tx_p
;
126 struct scatterlist
*sg_rx_p
;
127 struct scatterlist sg_tx
;
128 struct scatterlist sg_rx
;
132 dma_addr_t tx_buf_dma
;
133 dma_addr_t rx_buf_dma
;
136 * struct pch_spi_data - Holds the SPI channel specific details
137 * @io_remap_addr: The remapped PCI base address
138 * @master: Pointer to the SPI master structure
139 * @work: Reference to work queue handler
140 * @wk: Workqueue for carrying out execution of the
142 * @wait: Wait queue for waking up upon receiving an
144 * @transfer_complete: Status of SPI Transfer
145 * @bcurrent_msg_processing: Status flag for message processing
146 * @lock: Lock for protecting this structure
147 * @queue: SPI Message queue
148 * @status: Status of the SPI driver
149 * @bpw_len: Length of data to be transferred in bits per
151 * @transfer_active: Flag showing active transfer
152 * @tx_index: Transmit data count; for bookkeeping during
154 * @rx_index: Receive data count; for bookkeeping during
156 * @tx_buff: Buffer for data to be transmitted
157 * @rx_index: Buffer for Received data
158 * @n_curnt_chip: The chip number that this SPI driver currently
160 * @current_chip: Reference to the current chip that this SPI
161 * driver currently operates on
162 * @current_msg: The current message that this SPI driver is
164 * @cur_trans: The current transfer that this SPI driver is
166 * @board_dat: Reference to the SPI device data structure
167 * @plat_dev: platform_device structure
168 * @ch: SPI channel number
169 * @irq_reg_sts: Status of IRQ registration
171 struct pch_spi_data
{
172 void __iomem
*io_remap_addr
;
173 unsigned long io_base_addr
;
174 struct spi_master
*master
;
175 struct work_struct work
;
176 struct workqueue_struct
*wk
;
177 wait_queue_head_t wait
;
178 u8 transfer_complete
;
179 u8 bcurrent_msg_processing
;
181 struct list_head queue
;
190 struct spi_device
*current_chip
;
191 struct spi_message
*current_msg
;
192 struct spi_transfer
*cur_trans
;
193 struct pch_spi_board_data
*board_dat
;
194 struct platform_device
*plat_dev
;
196 struct pch_spi_dma_ctrl dma
;
203 * struct pch_spi_board_data - Holds the SPI device specific details
204 * @pdev: Pointer to the PCI device
205 * @suspend_sts: Status of suspend
206 * @num: The number of SPI device instance
208 struct pch_spi_board_data
{
209 struct pci_dev
*pdev
;
214 struct pch_pd_dev_save
{
216 struct platform_device
*pd_save
[PCH_SPI_MAX_DEV
];
217 struct pch_spi_board_data
*board_dat
;
220 static DEFINE_PCI_DEVICE_TABLE(pch_spi_pcidev_id
) = {
221 { PCI_VDEVICE(INTEL
, PCI_DEVICE_ID_GE_SPI
), 1, },
222 { PCI_VDEVICE(ROHM
, PCI_DEVICE_ID_ML7213_SPI
), 2, },
223 { PCI_VDEVICE(ROHM
, PCI_DEVICE_ID_ML7223_SPI
), 1, },
224 { PCI_VDEVICE(ROHM
, PCI_DEVICE_ID_ML7831_SPI
), 1, },
229 * pch_spi_writereg() - Performs register writes
230 * @master: Pointer to struct spi_master.
231 * @idx: Register offset.
232 * @val: Value to be written to register.
234 static inline void pch_spi_writereg(struct spi_master
*master
, int idx
, u32 val
)
236 struct pch_spi_data
*data
= spi_master_get_devdata(master
);
237 iowrite32(val
, (data
->io_remap_addr
+ idx
));
241 * pch_spi_readreg() - Performs register reads
242 * @master: Pointer to struct spi_master.
243 * @idx: Register offset.
245 static inline u32
pch_spi_readreg(struct spi_master
*master
, int idx
)
247 struct pch_spi_data
*data
= spi_master_get_devdata(master
);
248 return ioread32(data
->io_remap_addr
+ idx
);
251 static inline void pch_spi_setclr_reg(struct spi_master
*master
, int idx
,
254 u32 tmp
= pch_spi_readreg(master
, idx
);
255 tmp
= (tmp
& ~clr
) | set
;
256 pch_spi_writereg(master
, idx
, tmp
);
259 static void pch_spi_set_master_mode(struct spi_master
*master
)
261 pch_spi_setclr_reg(master
, PCH_SPCR
, SPCR_MSTR_BIT
, 0);
265 * pch_spi_clear_fifo() - Clears the Transmit and Receive FIFOs
266 * @master: Pointer to struct spi_master.
268 static void pch_spi_clear_fifo(struct spi_master
*master
)
270 pch_spi_setclr_reg(master
, PCH_SPCR
, SPCR_FICLR_BIT
, 0);
271 pch_spi_setclr_reg(master
, PCH_SPCR
, 0, SPCR_FICLR_BIT
);
274 static void pch_spi_handler_sub(struct pch_spi_data
*data
, u32 reg_spsr_val
,
275 void __iomem
*io_remap_addr
)
277 u32 n_read
, tx_index
, rx_index
, bpw_len
;
278 u16
*pkt_rx_buffer
, *pkt_tx_buff
;
285 spsr
= io_remap_addr
+ PCH_SPSR
;
286 iowrite32(reg_spsr_val
, spsr
);
288 if (data
->transfer_active
) {
289 rx_index
= data
->rx_index
;
290 tx_index
= data
->tx_index
;
291 bpw_len
= data
->bpw_len
;
292 pkt_rx_buffer
= data
->pkt_rx_buff
;
293 pkt_tx_buff
= data
->pkt_tx_buff
;
295 spdrr
= io_remap_addr
+ PCH_SPDRR
;
296 spdwr
= io_remap_addr
+ PCH_SPDWR
;
298 n_read
= PCH_READABLE(reg_spsr_val
);
300 for (read_cnt
= 0; (read_cnt
< n_read
); read_cnt
++) {
301 pkt_rx_buffer
[rx_index
++] = ioread32(spdrr
);
302 if (tx_index
< bpw_len
)
303 iowrite32(pkt_tx_buff
[tx_index
++], spdwr
);
306 /* disable RFI if not needed */
307 if ((bpw_len
- rx_index
) <= PCH_MAX_FIFO_DEPTH
) {
308 reg_spcr_val
= ioread32(io_remap_addr
+ PCH_SPCR
);
309 reg_spcr_val
&= ~SPCR_RFIE_BIT
; /* disable RFI */
311 /* reset rx threshold */
312 reg_spcr_val
&= ~MASK_RFIC_SPCR_BITS
;
313 reg_spcr_val
|= (PCH_RX_THOLD_MAX
<< SPCR_RFIC_FIELD
);
315 iowrite32(reg_spcr_val
, (io_remap_addr
+ PCH_SPCR
));
319 data
->tx_index
= tx_index
;
320 data
->rx_index
= rx_index
;
322 /* if transfer complete interrupt */
323 if (reg_spsr_val
& SPSR_FI_BIT
) {
324 if ((tx_index
== bpw_len
) && (rx_index
== tx_index
)) {
325 /* disable interrupts */
326 pch_spi_setclr_reg(data
->master
, PCH_SPCR
, 0,
329 /* transfer is completed;
330 inform pch_spi_process_messages */
331 data
->transfer_complete
= true;
332 data
->transfer_active
= false;
333 wake_up(&data
->wait
);
335 dev_err(&data
->master
->dev
,
336 "%s : Transfer is not completed",
344 * pch_spi_handler() - Interrupt handler
345 * @irq: The interrupt number.
346 * @dev_id: Pointer to struct pch_spi_board_data.
348 static irqreturn_t
pch_spi_handler(int irq
, void *dev_id
)
352 void __iomem
*io_remap_addr
;
353 irqreturn_t ret
= IRQ_NONE
;
354 struct pch_spi_data
*data
= dev_id
;
355 struct pch_spi_board_data
*board_dat
= data
->board_dat
;
357 if (board_dat
->suspend_sts
) {
358 dev_dbg(&board_dat
->pdev
->dev
,
359 "%s returning due to suspend\n", __func__
);
363 io_remap_addr
= data
->io_remap_addr
;
364 spsr
= io_remap_addr
+ PCH_SPSR
;
366 reg_spsr_val
= ioread32(spsr
);
368 if (reg_spsr_val
& SPSR_ORF_BIT
) {
369 dev_err(&board_dat
->pdev
->dev
, "%s Over run error\n", __func__
);
370 if (data
->current_msg
->complete
) {
371 data
->transfer_complete
= true;
372 data
->current_msg
->status
= -EIO
;
373 data
->current_msg
->complete(data
->current_msg
->context
);
374 data
->bcurrent_msg_processing
= false;
375 data
->current_msg
= NULL
;
376 data
->cur_trans
= NULL
;
383 /* Check if the interrupt is for SPI device */
384 if (reg_spsr_val
& (SPSR_FI_BIT
| SPSR_RFI_BIT
)) {
385 pch_spi_handler_sub(data
, reg_spsr_val
, io_remap_addr
);
389 dev_dbg(&board_dat
->pdev
->dev
, "%s EXIT return value=%d\n",
396 * pch_spi_set_baud_rate() - Sets SPBR field in SPBRR
397 * @master: Pointer to struct spi_master.
398 * @speed_hz: Baud rate.
400 static void pch_spi_set_baud_rate(struct spi_master
*master
, u32 speed_hz
)
402 u32 n_spbr
= PCH_CLOCK_HZ
/ (speed_hz
* 2);
404 /* if baud rate is less than we can support limit it */
405 if (n_spbr
> PCH_MAX_SPBR
)
406 n_spbr
= PCH_MAX_SPBR
;
408 pch_spi_setclr_reg(master
, PCH_SPBRR
, n_spbr
, MASK_SPBRR_SPBR_BITS
);
412 * pch_spi_set_bits_per_word() - Sets SIZE field in SPBRR
413 * @master: Pointer to struct spi_master.
414 * @bits_per_word: Bits per word for SPI transfer.
416 static void pch_spi_set_bits_per_word(struct spi_master
*master
,
419 if (bits_per_word
== 8)
420 pch_spi_setclr_reg(master
, PCH_SPBRR
, 0, SPBRR_SIZE_BIT
);
422 pch_spi_setclr_reg(master
, PCH_SPBRR
, SPBRR_SIZE_BIT
, 0);
426 * pch_spi_setup_transfer() - Configures the PCH SPI hardware for transfer
427 * @spi: Pointer to struct spi_device.
429 static void pch_spi_setup_transfer(struct spi_device
*spi
)
433 dev_dbg(&spi
->dev
, "%s SPBRR content =%x setting baud rate=%d\n",
434 __func__
, pch_spi_readreg(spi
->master
, PCH_SPBRR
),
436 pch_spi_set_baud_rate(spi
->master
, spi
->max_speed_hz
);
438 /* set bits per word */
439 pch_spi_set_bits_per_word(spi
->master
, spi
->bits_per_word
);
441 if (!(spi
->mode
& SPI_LSB_FIRST
))
442 flags
|= SPCR_LSBF_BIT
;
443 if (spi
->mode
& SPI_CPOL
)
444 flags
|= SPCR_CPOL_BIT
;
445 if (spi
->mode
& SPI_CPHA
)
446 flags
|= SPCR_CPHA_BIT
;
447 pch_spi_setclr_reg(spi
->master
, PCH_SPCR
, flags
,
448 (SPCR_LSBF_BIT
| SPCR_CPOL_BIT
| SPCR_CPHA_BIT
));
450 /* Clear the FIFO by toggling FICLR to 1 and back to 0 */
451 pch_spi_clear_fifo(spi
->master
);
455 * pch_spi_reset() - Clears SPI registers
456 * @master: Pointer to struct spi_master.
458 static void pch_spi_reset(struct spi_master
*master
)
460 /* write 1 to reset SPI */
461 pch_spi_writereg(master
, PCH_SRST
, 0x1);
464 pch_spi_writereg(master
, PCH_SRST
, 0x0);
467 static int pch_spi_setup(struct spi_device
*pspi
)
469 /* check bits per word */
470 if (pspi
->bits_per_word
== 0) {
471 pspi
->bits_per_word
= 8;
472 dev_dbg(&pspi
->dev
, "%s 8 bits per word\n", __func__
);
475 /* Check baud rate setting */
476 /* if baud rate of chip is greater than
477 max we can support,return error */
478 if ((pspi
->max_speed_hz
) > PCH_MAX_BAUDRATE
)
479 pspi
->max_speed_hz
= PCH_MAX_BAUDRATE
;
481 dev_dbg(&pspi
->dev
, "%s MODE = %x\n", __func__
,
482 (pspi
->mode
) & (SPI_CPOL
| SPI_CPHA
));
487 static int pch_spi_transfer(struct spi_device
*pspi
, struct spi_message
*pmsg
)
490 struct spi_transfer
*transfer
;
491 struct pch_spi_data
*data
= spi_master_get_devdata(pspi
->master
);
495 /* validate spi message and baud rate */
496 if (unlikely(list_empty(&pmsg
->transfers
) == 1)) {
497 dev_err(&pspi
->dev
, "%s list empty\n", __func__
);
502 if (unlikely(pspi
->max_speed_hz
== 0)) {
503 dev_err(&pspi
->dev
, "%s pch_spi_transfer maxspeed=%d\n",
504 __func__
, pspi
->max_speed_hz
);
509 dev_dbg(&pspi
->dev
, "%s Transfer List not empty. "
510 "Transfer Speed is set.\n", __func__
);
512 spin_lock_irqsave(&data
->lock
, flags
);
513 /* validate Tx/Rx buffers and Transfer length */
514 list_for_each_entry(transfer
, &pmsg
->transfers
, transfer_list
) {
515 if (!transfer
->tx_buf
&& !transfer
->rx_buf
) {
517 "%s Tx and Rx buffer NULL\n", __func__
);
519 goto err_return_spinlock
;
522 if (!transfer
->len
) {
523 dev_err(&pspi
->dev
, "%s Transfer length invalid\n",
526 goto err_return_spinlock
;
529 dev_dbg(&pspi
->dev
, "%s Tx/Rx buffer valid. Transfer length"
530 " valid\n", __func__
);
532 /* if baud rate has been specified validate the same */
533 if (transfer
->speed_hz
> PCH_MAX_BAUDRATE
)
534 transfer
->speed_hz
= PCH_MAX_BAUDRATE
;
536 spin_unlock_irqrestore(&data
->lock
, flags
);
538 /* We won't process any messages if we have been asked to terminate */
539 if (data
->status
== STATUS_EXITING
) {
540 dev_err(&pspi
->dev
, "%s status = STATUS_EXITING.\n", __func__
);
545 /* If suspended ,return -EINVAL */
546 if (data
->board_dat
->suspend_sts
) {
547 dev_err(&pspi
->dev
, "%s suspend; returning EINVAL\n", __func__
);
552 /* set status of message */
553 pmsg
->actual_length
= 0;
554 dev_dbg(&pspi
->dev
, "%s - pmsg->status =%d\n", __func__
, pmsg
->status
);
556 pmsg
->status
= -EINPROGRESS
;
557 spin_lock_irqsave(&data
->lock
, flags
);
558 /* add message to queue */
559 list_add_tail(&pmsg
->queue
, &data
->queue
);
560 spin_unlock_irqrestore(&data
->lock
, flags
);
562 dev_dbg(&pspi
->dev
, "%s - Invoked list_add_tail\n", __func__
);
564 /* schedule work queue to run */
565 queue_work(data
->wk
, &data
->work
);
566 dev_dbg(&pspi
->dev
, "%s - Invoked queue work\n", __func__
);
571 dev_dbg(&pspi
->dev
, "%s RETURN=%d\n", __func__
, retval
);
574 dev_dbg(&pspi
->dev
, "%s RETURN=%d\n", __func__
, retval
);
575 spin_unlock_irqrestore(&data
->lock
, flags
);
579 static inline void pch_spi_select_chip(struct pch_spi_data
*data
,
580 struct spi_device
*pspi
)
582 if (data
->current_chip
!= NULL
) {
583 if (pspi
->chip_select
!= data
->n_curnt_chip
) {
584 dev_dbg(&pspi
->dev
, "%s : different slave\n", __func__
);
585 data
->current_chip
= NULL
;
589 data
->current_chip
= pspi
;
591 data
->n_curnt_chip
= data
->current_chip
->chip_select
;
593 dev_dbg(&pspi
->dev
, "%s :Invoking pch_spi_setup_transfer\n", __func__
);
594 pch_spi_setup_transfer(pspi
);
597 static void pch_spi_set_tx(struct pch_spi_data
*data
, int *bpw
)
602 struct spi_message
*pmsg
, *tmp
;
606 /* set baud rate if needed */
607 if (data
->cur_trans
->speed_hz
) {
608 dev_dbg(&data
->master
->dev
, "%s:setting baud rate\n", __func__
);
609 pch_spi_set_baud_rate(data
->master
, data
->cur_trans
->speed_hz
);
612 /* set bits per word if needed */
613 if (data
->cur_trans
->bits_per_word
&&
614 (data
->current_msg
->spi
->bits_per_word
!= data
->cur_trans
->bits_per_word
)) {
615 dev_dbg(&data
->master
->dev
, "%s:set bits per word\n", __func__
);
616 pch_spi_set_bits_per_word(data
->master
,
617 data
->cur_trans
->bits_per_word
);
618 *bpw
= data
->cur_trans
->bits_per_word
;
620 *bpw
= data
->current_msg
->spi
->bits_per_word
;
623 /* reset Tx/Rx index */
627 data
->bpw_len
= data
->cur_trans
->len
/ (*bpw
/ 8);
629 /* find alloc size */
630 size
= data
->cur_trans
->len
* sizeof(*data
->pkt_tx_buff
);
632 /* allocate memory for pkt_tx_buff & pkt_rx_buffer */
633 data
->pkt_tx_buff
= kzalloc(size
, GFP_KERNEL
);
634 if (data
->pkt_tx_buff
!= NULL
) {
635 data
->pkt_rx_buff
= kzalloc(size
, GFP_KERNEL
);
636 if (!data
->pkt_rx_buff
)
637 kfree(data
->pkt_tx_buff
);
640 if (!data
->pkt_rx_buff
) {
641 /* flush queue and set status of all transfers to -ENOMEM */
642 dev_err(&data
->master
->dev
, "%s :kzalloc failed\n", __func__
);
643 list_for_each_entry_safe(pmsg
, tmp
, data
->queue
.next
, queue
) {
644 pmsg
->status
= -ENOMEM
;
647 pmsg
->complete(pmsg
->context
);
649 /* delete from queue */
650 list_del_init(&pmsg
->queue
);
656 if (data
->cur_trans
->tx_buf
!= NULL
) {
658 tx_buf
= data
->cur_trans
->tx_buf
;
659 for (j
= 0; j
< data
->bpw_len
; j
++)
660 data
->pkt_tx_buff
[j
] = *tx_buf
++;
662 tx_sbuf
= data
->cur_trans
->tx_buf
;
663 for (j
= 0; j
< data
->bpw_len
; j
++)
664 data
->pkt_tx_buff
[j
] = *tx_sbuf
++;
668 /* if len greater than PCH_MAX_FIFO_DEPTH, write 16,else len bytes */
669 n_writes
= data
->bpw_len
;
670 if (n_writes
> PCH_MAX_FIFO_DEPTH
)
671 n_writes
= PCH_MAX_FIFO_DEPTH
;
673 dev_dbg(&data
->master
->dev
, "\n%s:Pulling down SSN low - writing "
674 "0x2 to SSNXCR\n", __func__
);
675 pch_spi_writereg(data
->master
, PCH_SSNXCR
, SSN_LOW
);
677 for (j
= 0; j
< n_writes
; j
++)
678 pch_spi_writereg(data
->master
, PCH_SPDWR
, data
->pkt_tx_buff
[j
]);
680 /* update tx_index */
683 /* reset transfer complete flag */
684 data
->transfer_complete
= false;
685 data
->transfer_active
= true;
688 static void pch_spi_nomore_transfer(struct pch_spi_data
*data
)
690 struct spi_message
*pmsg
, *tmp
;
691 dev_dbg(&data
->master
->dev
, "%s called\n", __func__
);
692 /* Invoke complete callback
693 * [To the spi core..indicating end of transfer] */
694 data
->current_msg
->status
= 0;
696 if (data
->current_msg
->complete
) {
697 dev_dbg(&data
->master
->dev
,
698 "%s:Invoking callback of SPI core\n", __func__
);
699 data
->current_msg
->complete(data
->current_msg
->context
);
702 /* update status in global variable */
703 data
->bcurrent_msg_processing
= false;
705 dev_dbg(&data
->master
->dev
,
706 "%s:data->bcurrent_msg_processing = false\n", __func__
);
708 data
->current_msg
= NULL
;
709 data
->cur_trans
= NULL
;
711 /* check if we have items in list and not suspending
712 * return 1 if list empty */
713 if ((list_empty(&data
->queue
) == 0) &&
714 (!data
->board_dat
->suspend_sts
) &&
715 (data
->status
!= STATUS_EXITING
)) {
716 /* We have some more work to do (either there is more tranint
717 * bpw;sfer requests in the current message or there are
720 dev_dbg(&data
->master
->dev
, "%s:Invoke queue_work\n", __func__
);
721 queue_work(data
->wk
, &data
->work
);
722 } else if (data
->board_dat
->suspend_sts
||
723 data
->status
== STATUS_EXITING
) {
724 dev_dbg(&data
->master
->dev
,
725 "%s suspend/remove initiated, flushing queue\n",
727 list_for_each_entry_safe(pmsg
, tmp
, data
->queue
.next
, queue
) {
731 pmsg
->complete(pmsg
->context
);
733 /* delete from queue */
734 list_del_init(&pmsg
->queue
);
739 static void pch_spi_set_ir(struct pch_spi_data
*data
)
741 /* enable interrupts, set threshold, enable SPI */
742 if ((data
->bpw_len
) > PCH_MAX_FIFO_DEPTH
)
743 /* set receive threshold to PCH_RX_THOLD */
744 pch_spi_setclr_reg(data
->master
, PCH_SPCR
,
745 PCH_RX_THOLD
<< SPCR_RFIC_FIELD
|
746 SPCR_FIE_BIT
| SPCR_RFIE_BIT
|
747 SPCR_ORIE_BIT
| SPCR_SPE_BIT
,
748 MASK_RFIC_SPCR_BITS
| PCH_ALL
);
750 /* set receive threshold to maximum */
751 pch_spi_setclr_reg(data
->master
, PCH_SPCR
,
752 PCH_RX_THOLD_MAX
<< SPCR_RFIC_FIELD
|
753 SPCR_FIE_BIT
| SPCR_ORIE_BIT
|
755 MASK_RFIC_SPCR_BITS
| PCH_ALL
);
757 /* Wait until the transfer completes; go to sleep after
758 initiating the transfer. */
759 dev_dbg(&data
->master
->dev
,
760 "%s:waiting for transfer to get over\n", __func__
);
762 wait_event_interruptible(data
->wait
, data
->transfer_complete
);
764 /* clear all interrupts */
765 pch_spi_writereg(data
->master
, PCH_SPSR
,
766 pch_spi_readreg(data
->master
, PCH_SPSR
));
767 /* Disable interrupts and SPI transfer */
768 pch_spi_setclr_reg(data
->master
, PCH_SPCR
, 0, PCH_ALL
| SPCR_SPE_BIT
);
770 pch_spi_clear_fifo(data
->master
);
773 static void pch_spi_copy_rx_data(struct pch_spi_data
*data
, int bpw
)
780 if (!data
->cur_trans
->rx_buf
)
784 rx_buf
= data
->cur_trans
->rx_buf
;
785 for (j
= 0; j
< data
->bpw_len
; j
++)
786 *rx_buf
++ = data
->pkt_rx_buff
[j
] & 0xFF;
788 rx_sbuf
= data
->cur_trans
->rx_buf
;
789 for (j
= 0; j
< data
->bpw_len
; j
++)
790 *rx_sbuf
++ = data
->pkt_rx_buff
[j
];
794 static void pch_spi_copy_rx_data_for_dma(struct pch_spi_data
*data
, int bpw
)
799 const u8
*rx_dma_buf
;
800 const u16
*rx_dma_sbuf
;
803 if (!data
->cur_trans
->rx_buf
)
807 rx_buf
= data
->cur_trans
->rx_buf
;
808 rx_dma_buf
= data
->dma
.rx_buf_virt
;
809 for (j
= 0; j
< data
->bpw_len
; j
++)
810 *rx_buf
++ = *rx_dma_buf
++ & 0xFF;
811 data
->cur_trans
->rx_buf
= rx_buf
;
813 rx_sbuf
= data
->cur_trans
->rx_buf
;
814 rx_dma_sbuf
= data
->dma
.rx_buf_virt
;
815 for (j
= 0; j
< data
->bpw_len
; j
++)
816 *rx_sbuf
++ = *rx_dma_sbuf
++;
817 data
->cur_trans
->rx_buf
= rx_sbuf
;
821 static int pch_spi_start_transfer(struct pch_spi_data
*data
)
823 struct pch_spi_dma_ctrl
*dma
;
829 spin_lock_irqsave(&data
->lock
, flags
);
831 /* disable interrupts, SPI set enable */
832 pch_spi_setclr_reg(data
->master
, PCH_SPCR
, SPCR_SPE_BIT
, PCH_ALL
);
834 spin_unlock_irqrestore(&data
->lock
, flags
);
836 /* Wait until the transfer completes; go to sleep after
837 initiating the transfer. */
838 dev_dbg(&data
->master
->dev
,
839 "%s:waiting for transfer to get over\n", __func__
);
840 rtn
= wait_event_interruptible_timeout(data
->wait
,
841 data
->transfer_complete
,
842 msecs_to_jiffies(2 * HZ
));
844 dev_err(&data
->master
->dev
,
845 "%s wait-event timeout\n", __func__
);
847 dma_sync_sg_for_cpu(&data
->master
->dev
, dma
->sg_rx_p
, dma
->nent
,
850 dma_sync_sg_for_cpu(&data
->master
->dev
, dma
->sg_tx_p
, dma
->nent
,
852 memset(data
->dma
.tx_buf_virt
, 0, PAGE_SIZE
);
854 async_tx_ack(dma
->desc_rx
);
855 async_tx_ack(dma
->desc_tx
);
859 spin_lock_irqsave(&data
->lock
, flags
);
861 /* clear fifo threshold, disable interrupts, disable SPI transfer */
862 pch_spi_setclr_reg(data
->master
, PCH_SPCR
, 0,
863 MASK_RFIC_SPCR_BITS
| MASK_TFIC_SPCR_BITS
| PCH_ALL
|
865 /* clear all interrupts */
866 pch_spi_writereg(data
->master
, PCH_SPSR
,
867 pch_spi_readreg(data
->master
, PCH_SPSR
));
869 pch_spi_clear_fifo(data
->master
);
871 spin_unlock_irqrestore(&data
->lock
, flags
);
876 static void pch_dma_rx_complete(void *arg
)
878 struct pch_spi_data
*data
= arg
;
880 /* transfer is completed;inform pch_spi_process_messages_dma */
881 data
->transfer_complete
= true;
882 wake_up_interruptible(&data
->wait
);
885 static bool pch_spi_filter(struct dma_chan
*chan
, void *slave
)
887 struct pch_dma_slave
*param
= slave
;
889 if ((chan
->chan_id
== param
->chan_id
) &&
890 (param
->dma_dev
== chan
->device
->dev
)) {
891 chan
->private = param
;
898 static void pch_spi_request_dma(struct pch_spi_data
*data
, int bpw
)
901 struct dma_chan
*chan
;
902 struct pci_dev
*dma_dev
;
903 struct pch_dma_slave
*param
;
904 struct pch_spi_dma_ctrl
*dma
;
908 width
= PCH_DMA_WIDTH_1_BYTE
;
910 width
= PCH_DMA_WIDTH_2_BYTES
;
914 dma_cap_set(DMA_SLAVE
, mask
);
916 /* Get DMA's dev information */
917 dma_dev
= pci_get_bus_and_slot(data
->board_dat
->pdev
->bus
->number
,
921 param
= &dma
->param_tx
;
922 param
->dma_dev
= &dma_dev
->dev
;
923 param
->chan_id
= data
->master
->bus_num
* 2; /* Tx = 0, 2 */
924 param
->tx_reg
= data
->io_base_addr
+ PCH_SPDWR
;
925 param
->width
= width
;
926 chan
= dma_request_channel(mask
, pch_spi_filter
, param
);
928 dev_err(&data
->master
->dev
,
929 "ERROR: dma_request_channel FAILS(Tx)\n");
936 param
= &dma
->param_rx
;
937 param
->dma_dev
= &dma_dev
->dev
;
938 param
->chan_id
= data
->master
->bus_num
* 2 + 1; /* Rx = Tx + 1 */
939 param
->rx_reg
= data
->io_base_addr
+ PCH_SPDRR
;
940 param
->width
= width
;
941 chan
= dma_request_channel(mask
, pch_spi_filter
, param
);
943 dev_err(&data
->master
->dev
,
944 "ERROR: dma_request_channel FAILS(Rx)\n");
945 dma_release_channel(dma
->chan_tx
);
953 static void pch_spi_release_dma(struct pch_spi_data
*data
)
955 struct pch_spi_dma_ctrl
*dma
;
959 dma_release_channel(dma
->chan_tx
);
963 dma_release_channel(dma
->chan_rx
);
969 static void pch_spi_handle_dma(struct pch_spi_data
*data
, int *bpw
)
975 struct scatterlist
*sg
;
976 struct dma_async_tx_descriptor
*desc_tx
;
977 struct dma_async_tx_descriptor
*desc_rx
;
984 struct pch_spi_dma_ctrl
*dma
;
988 /* set baud rate if needed */
989 if (data
->cur_trans
->speed_hz
) {
990 dev_dbg(&data
->master
->dev
, "%s:setting baud rate\n", __func__
);
991 spin_lock_irqsave(&data
->lock
, flags
);
992 pch_spi_set_baud_rate(data
->master
, data
->cur_trans
->speed_hz
);
993 spin_unlock_irqrestore(&data
->lock
, flags
);
996 /* set bits per word if needed */
997 if (data
->cur_trans
->bits_per_word
&&
998 (data
->current_msg
->spi
->bits_per_word
!=
999 data
->cur_trans
->bits_per_word
)) {
1000 dev_dbg(&data
->master
->dev
, "%s:set bits per word\n", __func__
);
1001 spin_lock_irqsave(&data
->lock
, flags
);
1002 pch_spi_set_bits_per_word(data
->master
,
1003 data
->cur_trans
->bits_per_word
);
1004 spin_unlock_irqrestore(&data
->lock
, flags
);
1005 *bpw
= data
->cur_trans
->bits_per_word
;
1007 *bpw
= data
->current_msg
->spi
->bits_per_word
;
1009 data
->bpw_len
= data
->cur_trans
->len
/ (*bpw
/ 8);
1011 if (data
->bpw_len
> PCH_BUF_SIZE
) {
1012 data
->bpw_len
= PCH_BUF_SIZE
;
1013 data
->cur_trans
->len
-= PCH_BUF_SIZE
;
1017 if (data
->cur_trans
->tx_buf
!= NULL
) {
1019 tx_buf
= data
->cur_trans
->tx_buf
;
1020 tx_dma_buf
= dma
->tx_buf_virt
;
1021 for (i
= 0; i
< data
->bpw_len
; i
++)
1022 *tx_dma_buf
++ = *tx_buf
++;
1024 tx_sbuf
= data
->cur_trans
->tx_buf
;
1025 tx_dma_sbuf
= dma
->tx_buf_virt
;
1026 for (i
= 0; i
< data
->bpw_len
; i
++)
1027 *tx_dma_sbuf
++ = *tx_sbuf
++;
1031 /* Calculate Rx parameter for DMA transmitting */
1032 if (data
->bpw_len
> PCH_DMA_TRANS_SIZE
) {
1033 if (data
->bpw_len
% PCH_DMA_TRANS_SIZE
) {
1034 num
= data
->bpw_len
/ PCH_DMA_TRANS_SIZE
+ 1;
1035 rem
= data
->bpw_len
% PCH_DMA_TRANS_SIZE
;
1037 num
= data
->bpw_len
/ PCH_DMA_TRANS_SIZE
;
1038 rem
= PCH_DMA_TRANS_SIZE
;
1040 size
= PCH_DMA_TRANS_SIZE
;
1043 size
= data
->bpw_len
;
1044 rem
= data
->bpw_len
;
1046 dev_dbg(&data
->master
->dev
, "%s num=%d size=%d rem=%d\n",
1047 __func__
, num
, size
, rem
);
1048 spin_lock_irqsave(&data
->lock
, flags
);
1050 /* set receive fifo threshold and transmit fifo threshold */
1051 pch_spi_setclr_reg(data
->master
, PCH_SPCR
,
1052 ((size
- 1) << SPCR_RFIC_FIELD
) |
1053 (PCH_TX_THOLD
<< SPCR_TFIC_FIELD
),
1054 MASK_RFIC_SPCR_BITS
| MASK_TFIC_SPCR_BITS
);
1056 spin_unlock_irqrestore(&data
->lock
, flags
);
1059 dma
->sg_rx_p
= kzalloc(sizeof(struct scatterlist
)*num
, GFP_ATOMIC
);
1060 sg_init_table(dma
->sg_rx_p
, num
); /* Initialize SG table */
1061 /* offset, length setting */
1063 for (i
= 0; i
< num
; i
++, sg
++) {
1064 if (i
== (num
- 2)) {
1065 sg
->offset
= size
* i
;
1066 sg
->offset
= sg
->offset
* (*bpw
/ 8);
1067 sg_set_page(sg
, virt_to_page(dma
->rx_buf_virt
), rem
,
1069 sg_dma_len(sg
) = rem
;
1070 } else if (i
== (num
- 1)) {
1071 sg
->offset
= size
* (i
- 1) + rem
;
1072 sg
->offset
= sg
->offset
* (*bpw
/ 8);
1073 sg_set_page(sg
, virt_to_page(dma
->rx_buf_virt
), size
,
1075 sg_dma_len(sg
) = size
;
1077 sg
->offset
= size
* i
;
1078 sg
->offset
= sg
->offset
* (*bpw
/ 8);
1079 sg_set_page(sg
, virt_to_page(dma
->rx_buf_virt
), size
,
1081 sg_dma_len(sg
) = size
;
1083 sg_dma_address(sg
) = dma
->rx_buf_dma
+ sg
->offset
;
1086 desc_rx
= dmaengine_prep_slave_sg(dma
->chan_rx
, sg
,
1087 num
, DMA_DEV_TO_MEM
,
1088 DMA_PREP_INTERRUPT
| DMA_CTRL_ACK
);
1090 dev_err(&data
->master
->dev
, "%s:device_prep_slave_sg Failed\n",
1094 dma_sync_sg_for_device(&data
->master
->dev
, sg
, num
, DMA_FROM_DEVICE
);
1095 desc_rx
->callback
= pch_dma_rx_complete
;
1096 desc_rx
->callback_param
= data
;
1098 dma
->desc_rx
= desc_rx
;
1100 /* Calculate Tx parameter for DMA transmitting */
1101 if (data
->bpw_len
> PCH_MAX_FIFO_DEPTH
) {
1102 head
= PCH_MAX_FIFO_DEPTH
- PCH_DMA_TRANS_SIZE
;
1103 if (data
->bpw_len
% PCH_DMA_TRANS_SIZE
> 4) {
1104 num
= data
->bpw_len
/ PCH_DMA_TRANS_SIZE
+ 1;
1105 rem
= data
->bpw_len
% PCH_DMA_TRANS_SIZE
- head
;
1107 num
= data
->bpw_len
/ PCH_DMA_TRANS_SIZE
;
1108 rem
= data
->bpw_len
% PCH_DMA_TRANS_SIZE
+
1109 PCH_DMA_TRANS_SIZE
- head
;
1111 size
= PCH_DMA_TRANS_SIZE
;
1114 size
= data
->bpw_len
;
1115 rem
= data
->bpw_len
;
1119 dma
->sg_tx_p
= kzalloc(sizeof(struct scatterlist
)*num
, GFP_ATOMIC
);
1120 sg_init_table(dma
->sg_tx_p
, num
); /* Initialize SG table */
1121 /* offset, length setting */
1123 for (i
= 0; i
< num
; i
++, sg
++) {
1126 sg_set_page(sg
, virt_to_page(dma
->tx_buf_virt
), size
+ head
,
1128 sg_dma_len(sg
) = size
+ head
;
1129 } else if (i
== (num
- 1)) {
1130 sg
->offset
= head
+ size
* i
;
1131 sg
->offset
= sg
->offset
* (*bpw
/ 8);
1132 sg_set_page(sg
, virt_to_page(dma
->tx_buf_virt
), rem
,
1134 sg_dma_len(sg
) = rem
;
1136 sg
->offset
= head
+ size
* i
;
1137 sg
->offset
= sg
->offset
* (*bpw
/ 8);
1138 sg_set_page(sg
, virt_to_page(dma
->tx_buf_virt
), size
,
1140 sg_dma_len(sg
) = size
;
1142 sg_dma_address(sg
) = dma
->tx_buf_dma
+ sg
->offset
;
1145 desc_tx
= dmaengine_prep_slave_sg(dma
->chan_tx
,
1146 sg
, num
, DMA_MEM_TO_DEV
,
1147 DMA_PREP_INTERRUPT
| DMA_CTRL_ACK
);
1149 dev_err(&data
->master
->dev
, "%s:device_prep_slave_sg Failed\n",
1153 dma_sync_sg_for_device(&data
->master
->dev
, sg
, num
, DMA_TO_DEVICE
);
1154 desc_tx
->callback
= NULL
;
1155 desc_tx
->callback_param
= data
;
1157 dma
->desc_tx
= desc_tx
;
1159 dev_dbg(&data
->master
->dev
, "\n%s:Pulling down SSN low - writing "
1160 "0x2 to SSNXCR\n", __func__
);
1162 spin_lock_irqsave(&data
->lock
, flags
);
1163 pch_spi_writereg(data
->master
, PCH_SSNXCR
, SSN_LOW
);
1164 desc_rx
->tx_submit(desc_rx
);
1165 desc_tx
->tx_submit(desc_tx
);
1166 spin_unlock_irqrestore(&data
->lock
, flags
);
1168 /* reset transfer complete flag */
1169 data
->transfer_complete
= false;
1172 static void pch_spi_process_messages(struct work_struct
*pwork
)
1174 struct spi_message
*pmsg
, *tmp
;
1175 struct pch_spi_data
*data
;
1178 data
= container_of(pwork
, struct pch_spi_data
, work
);
1179 dev_dbg(&data
->master
->dev
, "%s data initialized\n", __func__
);
1181 spin_lock(&data
->lock
);
1182 /* check if suspend has been initiated;if yes flush queue */
1183 if (data
->board_dat
->suspend_sts
|| (data
->status
== STATUS_EXITING
)) {
1184 dev_dbg(&data
->master
->dev
, "%s suspend/remove initiated,"
1185 "flushing queue\n", __func__
);
1186 list_for_each_entry_safe(pmsg
, tmp
, data
->queue
.next
, queue
) {
1187 pmsg
->status
= -EIO
;
1189 if (pmsg
->complete
) {
1190 spin_unlock(&data
->lock
);
1191 pmsg
->complete(pmsg
->context
);
1192 spin_lock(&data
->lock
);
1195 /* delete from queue */
1196 list_del_init(&pmsg
->queue
);
1199 spin_unlock(&data
->lock
);
1203 data
->bcurrent_msg_processing
= true;
1204 dev_dbg(&data
->master
->dev
,
1205 "%s Set data->bcurrent_msg_processing= true\n", __func__
);
1207 /* Get the message from the queue and delete it from there. */
1208 data
->current_msg
= list_entry(data
->queue
.next
, struct spi_message
,
1211 list_del_init(&data
->current_msg
->queue
);
1213 data
->current_msg
->status
= 0;
1215 pch_spi_select_chip(data
, data
->current_msg
->spi
);
1217 spin_unlock(&data
->lock
);
1220 pch_spi_request_dma(data
,
1221 data
->current_msg
->spi
->bits_per_word
);
1222 pch_spi_writereg(data
->master
, PCH_SSNXCR
, SSN_NO_CONTROL
);
1225 /* If we are already processing a message get the next
1226 transfer structure from the message otherwise retrieve
1227 the 1st transfer request from the message. */
1228 spin_lock(&data
->lock
);
1229 if (data
->cur_trans
== NULL
) {
1231 list_entry(data
->current_msg
->transfers
.next
,
1232 struct spi_transfer
, transfer_list
);
1233 dev_dbg(&data
->master
->dev
, "%s "
1234 ":Getting 1st transfer message\n", __func__
);
1237 list_entry(data
->cur_trans
->transfer_list
.next
,
1238 struct spi_transfer
, transfer_list
);
1239 dev_dbg(&data
->master
->dev
, "%s "
1240 ":Getting next transfer message\n", __func__
);
1242 spin_unlock(&data
->lock
);
1244 if (!data
->cur_trans
->len
)
1246 cnt
= (data
->cur_trans
->len
- 1) / PCH_BUF_SIZE
+ 1;
1247 data
->save_total_len
= data
->cur_trans
->len
;
1248 if (data
->use_dma
) {
1250 char *save_rx_buf
= data
->cur_trans
->rx_buf
;
1251 for (i
= 0; i
< cnt
; i
++) {
1252 pch_spi_handle_dma(data
, &bpw
);
1253 if (!pch_spi_start_transfer(data
)) {
1254 data
->transfer_complete
= true;
1255 data
->current_msg
->status
= -EIO
;
1256 data
->current_msg
->complete
1257 (data
->current_msg
->context
);
1258 data
->bcurrent_msg_processing
= false;
1259 data
->current_msg
= NULL
;
1260 data
->cur_trans
= NULL
;
1263 pch_spi_copy_rx_data_for_dma(data
, bpw
);
1265 data
->cur_trans
->rx_buf
= save_rx_buf
;
1267 pch_spi_set_tx(data
, &bpw
);
1268 pch_spi_set_ir(data
);
1269 pch_spi_copy_rx_data(data
, bpw
);
1270 kfree(data
->pkt_rx_buff
);
1271 data
->pkt_rx_buff
= NULL
;
1272 kfree(data
->pkt_tx_buff
);
1273 data
->pkt_tx_buff
= NULL
;
1275 /* increment message count */
1276 data
->cur_trans
->len
= data
->save_total_len
;
1277 data
->current_msg
->actual_length
+= data
->cur_trans
->len
;
1279 dev_dbg(&data
->master
->dev
,
1280 "%s:data->current_msg->actual_length=%d\n",
1281 __func__
, data
->current_msg
->actual_length
);
1283 /* check for delay */
1284 if (data
->cur_trans
->delay_usecs
) {
1285 dev_dbg(&data
->master
->dev
, "%s:"
1286 "delay in usec=%d\n", __func__
,
1287 data
->cur_trans
->delay_usecs
);
1288 udelay(data
->cur_trans
->delay_usecs
);
1291 spin_lock(&data
->lock
);
1293 /* No more transfer in this message. */
1294 if ((data
->cur_trans
->transfer_list
.next
) ==
1295 &(data
->current_msg
->transfers
)) {
1296 pch_spi_nomore_transfer(data
);
1299 spin_unlock(&data
->lock
);
1301 } while (data
->cur_trans
!= NULL
);
1304 pch_spi_writereg(data
->master
, PCH_SSNXCR
, SSN_HIGH
);
1306 pch_spi_release_dma(data
);
1309 static void pch_spi_free_resources(struct pch_spi_board_data
*board_dat
,
1310 struct pch_spi_data
*data
)
1312 dev_dbg(&board_dat
->pdev
->dev
, "%s ENTRY\n", __func__
);
1314 /* free workqueue */
1315 if (data
->wk
!= NULL
) {
1316 destroy_workqueue(data
->wk
);
1318 dev_dbg(&board_dat
->pdev
->dev
,
1319 "%s destroy_workqueue invoked successfully\n",
1324 static int pch_spi_get_resources(struct pch_spi_board_data
*board_dat
,
1325 struct pch_spi_data
*data
)
1329 dev_dbg(&board_dat
->pdev
->dev
, "%s ENTRY\n", __func__
);
1331 /* create workqueue */
1332 data
->wk
= create_singlethread_workqueue(KBUILD_MODNAME
);
1334 dev_err(&board_dat
->pdev
->dev
,
1335 "%s create_singlet hread_workqueue failed\n", __func__
);
1340 /* reset PCH SPI h/w */
1341 pch_spi_reset(data
->master
);
1342 dev_dbg(&board_dat
->pdev
->dev
,
1343 "%s pch_spi_reset invoked successfully\n", __func__
);
1345 dev_dbg(&board_dat
->pdev
->dev
, "%s data->irq_reg_sts=true\n", __func__
);
1349 dev_err(&board_dat
->pdev
->dev
,
1350 "%s FAIL:invoking pch_spi_free_resources\n", __func__
);
1351 pch_spi_free_resources(board_dat
, data
);
1354 dev_dbg(&board_dat
->pdev
->dev
, "%s Return=%d\n", __func__
, retval
);
1359 static void pch_free_dma_buf(struct pch_spi_board_data
*board_dat
,
1360 struct pch_spi_data
*data
)
1362 struct pch_spi_dma_ctrl
*dma
;
1365 if (dma
->tx_buf_dma
)
1366 dma_free_coherent(&board_dat
->pdev
->dev
, PCH_BUF_SIZE
,
1367 dma
->tx_buf_virt
, dma
->tx_buf_dma
);
1368 if (dma
->rx_buf_dma
)
1369 dma_free_coherent(&board_dat
->pdev
->dev
, PCH_BUF_SIZE
,
1370 dma
->rx_buf_virt
, dma
->rx_buf_dma
);
1374 static void pch_alloc_dma_buf(struct pch_spi_board_data
*board_dat
,
1375 struct pch_spi_data
*data
)
1377 struct pch_spi_dma_ctrl
*dma
;
1380 /* Get Consistent memory for Tx DMA */
1381 dma
->tx_buf_virt
= dma_alloc_coherent(&board_dat
->pdev
->dev
,
1382 PCH_BUF_SIZE
, &dma
->tx_buf_dma
, GFP_KERNEL
);
1383 /* Get Consistent memory for Rx DMA */
1384 dma
->rx_buf_virt
= dma_alloc_coherent(&board_dat
->pdev
->dev
,
1385 PCH_BUF_SIZE
, &dma
->rx_buf_dma
, GFP_KERNEL
);
1388 static int pch_spi_pd_probe(struct platform_device
*plat_dev
)
1391 struct spi_master
*master
;
1392 struct pch_spi_board_data
*board_dat
= dev_get_platdata(&plat_dev
->dev
);
1393 struct pch_spi_data
*data
;
1395 dev_dbg(&plat_dev
->dev
, "%s:debug\n", __func__
);
1397 master
= spi_alloc_master(&board_dat
->pdev
->dev
,
1398 sizeof(struct pch_spi_data
));
1400 dev_err(&plat_dev
->dev
, "spi_alloc_master[%d] failed.\n",
1405 data
= spi_master_get_devdata(master
);
1406 data
->master
= master
;
1408 platform_set_drvdata(plat_dev
, data
);
1410 /* baseaddress + address offset) */
1411 data
->io_base_addr
= pci_resource_start(board_dat
->pdev
, 1) +
1412 PCH_ADDRESS_SIZE
* plat_dev
->id
;
1413 data
->io_remap_addr
= pci_iomap(board_dat
->pdev
, 1, 0) +
1414 PCH_ADDRESS_SIZE
* plat_dev
->id
;
1415 if (!data
->io_remap_addr
) {
1416 dev_err(&plat_dev
->dev
, "%s pci_iomap failed\n", __func__
);
1421 dev_dbg(&plat_dev
->dev
, "[ch%d] remap_addr=%p\n",
1422 plat_dev
->id
, data
->io_remap_addr
);
1424 /* initialize members of SPI master */
1425 master
->num_chipselect
= PCH_MAX_CS
;
1426 master
->setup
= pch_spi_setup
;
1427 master
->transfer
= pch_spi_transfer
;
1428 master
->mode_bits
= SPI_CPOL
| SPI_CPHA
| SPI_LSB_FIRST
;
1429 master
->bits_per_word_mask
= SPI_BPW_MASK(8) | SPI_BPW_MASK(16);
1431 data
->board_dat
= board_dat
;
1432 data
->plat_dev
= plat_dev
;
1433 data
->n_curnt_chip
= 255;
1434 data
->status
= STATUS_RUNNING
;
1435 data
->ch
= plat_dev
->id
;
1436 data
->use_dma
= use_dma
;
1438 INIT_LIST_HEAD(&data
->queue
);
1439 spin_lock_init(&data
->lock
);
1440 INIT_WORK(&data
->work
, pch_spi_process_messages
);
1441 init_waitqueue_head(&data
->wait
);
1443 ret
= pch_spi_get_resources(board_dat
, data
);
1445 dev_err(&plat_dev
->dev
, "%s fail(retval=%d)\n", __func__
, ret
);
1446 goto err_spi_get_resources
;
1449 ret
= request_irq(board_dat
->pdev
->irq
, pch_spi_handler
,
1450 IRQF_SHARED
, KBUILD_MODNAME
, data
);
1452 dev_err(&plat_dev
->dev
,
1453 "%s request_irq failed\n", __func__
);
1454 goto err_request_irq
;
1456 data
->irq_reg_sts
= true;
1458 pch_spi_set_master_mode(master
);
1460 ret
= spi_register_master(master
);
1462 dev_err(&plat_dev
->dev
,
1463 "%s spi_register_master FAILED\n", __func__
);
1464 goto err_spi_register_master
;
1468 dev_info(&plat_dev
->dev
, "Use DMA for data transfers\n");
1469 pch_alloc_dma_buf(board_dat
, data
);
1474 err_spi_register_master
:
1475 free_irq(board_dat
->pdev
->irq
, data
);
1477 pch_spi_free_resources(board_dat
, data
);
1478 err_spi_get_resources
:
1479 pci_iounmap(board_dat
->pdev
, data
->io_remap_addr
);
1481 spi_master_put(master
);
1486 static int pch_spi_pd_remove(struct platform_device
*plat_dev
)
1488 struct pch_spi_board_data
*board_dat
= dev_get_platdata(&plat_dev
->dev
);
1489 struct pch_spi_data
*data
= platform_get_drvdata(plat_dev
);
1491 unsigned long flags
;
1493 dev_dbg(&plat_dev
->dev
, "%s:[ch%d] irq=%d\n",
1494 __func__
, plat_dev
->id
, board_dat
->pdev
->irq
);
1497 pch_free_dma_buf(board_dat
, data
);
1499 /* check for any pending messages; no action is taken if the queue
1500 * is still full; but at least we tried. Unload anyway */
1502 spin_lock_irqsave(&data
->lock
, flags
);
1503 data
->status
= STATUS_EXITING
;
1504 while ((list_empty(&data
->queue
) == 0) && --count
) {
1505 dev_dbg(&board_dat
->pdev
->dev
, "%s :queue not empty\n",
1507 spin_unlock_irqrestore(&data
->lock
, flags
);
1508 msleep(PCH_SLEEP_TIME
);
1509 spin_lock_irqsave(&data
->lock
, flags
);
1511 spin_unlock_irqrestore(&data
->lock
, flags
);
1513 pch_spi_free_resources(board_dat
, data
);
1514 /* disable interrupts & free IRQ */
1515 if (data
->irq_reg_sts
) {
1516 /* disable interrupts */
1517 pch_spi_setclr_reg(data
->master
, PCH_SPCR
, 0, PCH_ALL
);
1518 data
->irq_reg_sts
= false;
1519 free_irq(board_dat
->pdev
->irq
, data
);
1522 pci_iounmap(board_dat
->pdev
, data
->io_remap_addr
);
1523 spi_unregister_master(data
->master
);
1528 static int pch_spi_pd_suspend(struct platform_device
*pd_dev
,
1532 struct pch_spi_board_data
*board_dat
= dev_get_platdata(&pd_dev
->dev
);
1533 struct pch_spi_data
*data
= platform_get_drvdata(pd_dev
);
1535 dev_dbg(&pd_dev
->dev
, "%s ENTRY\n", __func__
);
1538 dev_err(&pd_dev
->dev
,
1539 "%s pci_get_drvdata returned NULL\n", __func__
);
1543 /* check if the current message is processed:
1544 Only after thats done the transfer will be suspended */
1546 while ((--count
) > 0) {
1547 if (!(data
->bcurrent_msg_processing
))
1549 msleep(PCH_SLEEP_TIME
);
1553 if (data
->irq_reg_sts
) {
1554 /* disable all interrupts */
1555 pch_spi_setclr_reg(data
->master
, PCH_SPCR
, 0, PCH_ALL
);
1556 pch_spi_reset(data
->master
);
1557 free_irq(board_dat
->pdev
->irq
, data
);
1559 data
->irq_reg_sts
= false;
1560 dev_dbg(&pd_dev
->dev
,
1561 "%s free_irq invoked successfully.\n", __func__
);
1567 static int pch_spi_pd_resume(struct platform_device
*pd_dev
)
1569 struct pch_spi_board_data
*board_dat
= dev_get_platdata(&pd_dev
->dev
);
1570 struct pch_spi_data
*data
= platform_get_drvdata(pd_dev
);
1574 dev_err(&pd_dev
->dev
,
1575 "%s pci_get_drvdata returned NULL\n", __func__
);
1579 if (!data
->irq_reg_sts
) {
1581 retval
= request_irq(board_dat
->pdev
->irq
, pch_spi_handler
,
1582 IRQF_SHARED
, KBUILD_MODNAME
, data
);
1584 dev_err(&pd_dev
->dev
,
1585 "%s request_irq failed\n", __func__
);
1589 /* reset PCH SPI h/w */
1590 pch_spi_reset(data
->master
);
1591 pch_spi_set_master_mode(data
->master
);
1592 data
->irq_reg_sts
= true;
1597 #define pch_spi_pd_suspend NULL
1598 #define pch_spi_pd_resume NULL
1601 static struct platform_driver pch_spi_pd_driver
= {
1604 .owner
= THIS_MODULE
,
1606 .probe
= pch_spi_pd_probe
,
1607 .remove
= pch_spi_pd_remove
,
1608 .suspend
= pch_spi_pd_suspend
,
1609 .resume
= pch_spi_pd_resume
1612 static int pch_spi_probe(struct pci_dev
*pdev
,
1613 const struct pci_device_id
*id
)
1615 struct pch_spi_board_data
*board_dat
;
1616 struct platform_device
*pd_dev
= NULL
;
1619 struct pch_pd_dev_save
*pd_dev_save
;
1621 pd_dev_save
= kzalloc(sizeof(struct pch_pd_dev_save
), GFP_KERNEL
);
1623 dev_err(&pdev
->dev
, "%s Can't allocate pd_dev_sav\n", __func__
);
1627 board_dat
= kzalloc(sizeof(struct pch_spi_board_data
), GFP_KERNEL
);
1629 dev_err(&pdev
->dev
, "%s Can't allocate board_dat\n", __func__
);
1634 retval
= pci_request_regions(pdev
, KBUILD_MODNAME
);
1636 dev_err(&pdev
->dev
, "%s request_region failed\n", __func__
);
1637 goto pci_request_regions
;
1640 board_dat
->pdev
= pdev
;
1641 board_dat
->num
= id
->driver_data
;
1642 pd_dev_save
->num
= id
->driver_data
;
1643 pd_dev_save
->board_dat
= board_dat
;
1645 retval
= pci_enable_device(pdev
);
1647 dev_err(&pdev
->dev
, "%s pci_enable_device failed\n", __func__
);
1648 goto pci_enable_device
;
1651 for (i
= 0; i
< board_dat
->num
; i
++) {
1652 pd_dev
= platform_device_alloc("pch-spi", i
);
1654 dev_err(&pdev
->dev
, "platform_device_alloc failed\n");
1656 goto err_platform_device
;
1658 pd_dev_save
->pd_save
[i
] = pd_dev
;
1659 pd_dev
->dev
.parent
= &pdev
->dev
;
1661 retval
= platform_device_add_data(pd_dev
, board_dat
,
1662 sizeof(*board_dat
));
1665 "platform_device_add_data failed\n");
1666 platform_device_put(pd_dev
);
1667 goto err_platform_device
;
1670 retval
= platform_device_add(pd_dev
);
1672 dev_err(&pdev
->dev
, "platform_device_add failed\n");
1673 platform_device_put(pd_dev
);
1674 goto err_platform_device
;
1678 pci_set_drvdata(pdev
, pd_dev_save
);
1682 err_platform_device
:
1683 pci_disable_device(pdev
);
1685 pci_release_regions(pdev
);
1686 pci_request_regions
:
1694 static void pch_spi_remove(struct pci_dev
*pdev
)
1697 struct pch_pd_dev_save
*pd_dev_save
= pci_get_drvdata(pdev
);
1699 dev_dbg(&pdev
->dev
, "%s ENTRY:pdev=%p\n", __func__
, pdev
);
1701 for (i
= 0; i
< pd_dev_save
->num
; i
++)
1702 platform_device_unregister(pd_dev_save
->pd_save
[i
]);
1704 pci_disable_device(pdev
);
1705 pci_release_regions(pdev
);
1706 kfree(pd_dev_save
->board_dat
);
1711 static int pch_spi_suspend(struct pci_dev
*pdev
, pm_message_t state
)
1714 struct pch_pd_dev_save
*pd_dev_save
= pci_get_drvdata(pdev
);
1716 dev_dbg(&pdev
->dev
, "%s ENTRY\n", __func__
);
1718 pd_dev_save
->board_dat
->suspend_sts
= true;
1720 /* save config space */
1721 retval
= pci_save_state(pdev
);
1723 pci_enable_wake(pdev
, PCI_D3hot
, 0);
1724 pci_disable_device(pdev
);
1725 pci_set_power_state(pdev
, PCI_D3hot
);
1727 dev_err(&pdev
->dev
, "%s pci_save_state failed\n", __func__
);
1733 static int pch_spi_resume(struct pci_dev
*pdev
)
1736 struct pch_pd_dev_save
*pd_dev_save
= pci_get_drvdata(pdev
);
1737 dev_dbg(&pdev
->dev
, "%s ENTRY\n", __func__
);
1739 pci_set_power_state(pdev
, PCI_D0
);
1740 pci_restore_state(pdev
);
1742 retval
= pci_enable_device(pdev
);
1745 "%s pci_enable_device failed\n", __func__
);
1747 pci_enable_wake(pdev
, PCI_D3hot
, 0);
1749 /* set suspend status to false */
1750 pd_dev_save
->board_dat
->suspend_sts
= false;
1756 #define pch_spi_suspend NULL
1757 #define pch_spi_resume NULL
1761 static struct pci_driver pch_spi_pcidev_driver
= {
1763 .id_table
= pch_spi_pcidev_id
,
1764 .probe
= pch_spi_probe
,
1765 .remove
= pch_spi_remove
,
1766 .suspend
= pch_spi_suspend
,
1767 .resume
= pch_spi_resume
,
1770 static int __init
pch_spi_init(void)
1773 ret
= platform_driver_register(&pch_spi_pd_driver
);
1777 ret
= pci_register_driver(&pch_spi_pcidev_driver
);
1779 platform_driver_unregister(&pch_spi_pd_driver
);
1785 module_init(pch_spi_init
);
1787 static void __exit
pch_spi_exit(void)
1789 pci_unregister_driver(&pch_spi_pcidev_driver
);
1790 platform_driver_unregister(&pch_spi_pd_driver
);
1792 module_exit(pch_spi_exit
);
1794 module_param(use_dma
, int, 0644);
1795 MODULE_PARM_DESC(use_dma
,
1796 "to use DMA for data transfers pass 1 else 0; default 1");
1798 MODULE_LICENSE("GPL");
1799 MODULE_DESCRIPTION("Intel EG20T PCH/LAPIS Semiconductor ML7xxx IOH SPI Driver");
1800 MODULE_DEVICE_TABLE(pci
, pch_spi_pcidev_id
);