| blob | febd45cd50273532e99c1a4d790d2690c6ae750d |
1 #
2 # Serial device configuration
3 #
5 if TTY
7 menu "Serial drivers"
8 depends on HAS_IOMEM
10 source "drivers/tty/serial/8250/Kconfig"
12 comment "Non-8250 serial port support"
14 config SERIAL_AMBA_PL010
15 tristate "ARM AMBA PL010 serial port support"
16 depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE)
17 select SERIAL_CORE
18 help
19 This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have
20 an Integrator/AP or Integrator/PP2 platform, or if you have a
21 Cirrus Logic EP93xx CPU, say Y or M here.
23 If unsure, say N.
25 config SERIAL_AMBA_PL010_CONSOLE
26 bool "Support for console on AMBA serial port"
27 depends on SERIAL_AMBA_PL010=y
28 select SERIAL_CORE_CONSOLE
29 ---help---
30 Say Y here if you wish to use an AMBA PrimeCell UART as the system
31 console (the system console is the device which receives all kernel
32 messages and warnings and which allows logins in single user mode).
34 Even if you say Y here, the currently visible framebuffer console
35 (/dev/tty0) will still be used as the system console by default, but
36 you can alter that using a kernel command line option such as
37 "console=ttyAM0". (Try "man bootparam" or see the documentation of
38 your boot loader (lilo or loadlin) about how to pass options to the
39 kernel at boot time.)
41 config SERIAL_AMBA_PL011
42 tristate "ARM AMBA PL011 serial port support"
43 depends on ARM_AMBA
44 select SERIAL_CORE
45 help
46 This selects the ARM(R) AMBA(R) PrimeCell PL011 UART. If you have
47 an Integrator/PP2, Integrator/CP or Versatile platform, say Y or M
48 here.
50 If unsure, say N.
52 config SERIAL_AMBA_PL011_CONSOLE
53 bool "Support for console on AMBA serial port"
54 depends on SERIAL_AMBA_PL011=y
55 select SERIAL_CORE_CONSOLE
56 ---help---
57 Say Y here if you wish to use an AMBA PrimeCell UART as the system
58 console (the system console is the device which receives all kernel
59 messages and warnings and which allows logins in single user mode).
61 Even if you say Y here, the currently visible framebuffer console
62 (/dev/tty0) will still be used as the system console by default, but
63 you can alter that using a kernel command line option such as
64 "console=ttyAMA0". (Try "man bootparam" or see the documentation of
65 your boot loader (lilo or loadlin) about how to pass options to the
66 kernel at boot time.)
68 config SERIAL_SB1250_DUART
69 tristate "BCM1xxx on-chip DUART serial support"
70 depends on SIBYTE_SB1xxx_SOC=y
71 select SERIAL_CORE
72 default y
73 ---help---
74 Support for the asynchronous serial interface (DUART) included in
75 the BCM1250 and derived System-On-a-Chip (SOC) devices. Note that
76 the letter D in DUART stands for "dual", which is how the device
77 is implemented. Depending on the SOC configuration there may be
78 one or more DUARTs available of which all are handled.
80 If unsure, say Y. To compile this driver as a module, choose M here:
81 the module will be called sb1250-duart.
83 config SERIAL_SB1250_DUART_CONSOLE
84 bool "Support for console on a BCM1xxx DUART serial port"
85 depends on SERIAL_SB1250_DUART=y
86 select SERIAL_CORE_CONSOLE
87 default y
88 ---help---
89 If you say Y here, it will be possible to use a serial port as the
90 system console (the system console is the device which receives all
91 kernel messages and warnings and which allows logins in single user
92 mode).
94 If unsure, say Y.
96 config SERIAL_ATMEL
97 bool "AT91 / AT32 on-chip serial port support"
98 depends on ARCH_AT91 || AVR32
99 select SERIAL_CORE
100 help
101 This enables the driver for the on-chip UARTs of the Atmel
102 AT91 and AT32 processors.
104 config SERIAL_ATMEL_CONSOLE
105 bool "Support for console on AT91 / AT32 serial port"
106 depends on SERIAL_ATMEL=y
107 select SERIAL_CORE_CONSOLE
108 help
109 Say Y here if you wish to use an on-chip UART on a Atmel
110 AT91 or AT32 processor as the system console (the system
111 console is the device which receives all kernel messages and
112 warnings and which allows logins in single user mode).
114 config SERIAL_ATMEL_PDC
115 bool "Support DMA transfers on AT91 / AT32 serial port"
116 depends on SERIAL_ATMEL
117 default y
118 help
119 Say Y here if you wish to use the PDC to do DMA transfers to
120 and from the Atmel AT91 / AT32 serial port. In order to
121 actually use DMA transfers, make sure that the use_dma_tx
122 and use_dma_rx members in the atmel_uart_data struct is set
123 appropriately for each port.
125 Note that break and error handling currently doesn't work
126 properly when DMA is enabled. Make sure that ports where
127 this matters don't use DMA.
129 config SERIAL_ATMEL_TTYAT
130 bool "Install as device ttyATn instead of ttySn"
131 depends on SERIAL_ATMEL=y
132 help
133 Say Y here if you wish to have the internal AT91 / AT32 UARTs
134 appear as /dev/ttyATn (major 204, minor starting at 154)
135 instead of the normal /dev/ttySn (major 4, minor starting at
136 64). This is necessary if you also want other UARTs, such as
137 external 8250/16C550 compatible UARTs.
138 The ttySn nodes are legally reserved for the 8250 serial driver
139 but are often misused by other serial drivers.
141 To use this, you should create suitable ttyATn device nodes in
142 /dev/, and pass "console=ttyATn" to the kernel.
144 Say Y if you have an external 8250/16C550 UART. If unsure, say N.
146 config SERIAL_KGDB_NMI
147 bool "Serial console over KGDB NMI debugger port"
148 depends on KGDB_SERIAL_CONSOLE
149 help
150 This special driver allows you to temporary use NMI debugger port
151 as a normal console (assuming that the port is attached to KGDB).
153 Unlike KDB's disable_nmi command, with this driver you are always
154 able to go back to the debugger using KGDB escape sequence ($3#33).
155 This is because this console driver processes the input in NMI
156 context, and thus is able to intercept the magic sequence.
158 Note that since the console interprets input and uses polling
159 communication methods, for things like PPP you still must fully
160 detach debugger port from the KGDB NMI (i.e. disable_nmi), and
161 use raw console.
163 If unsure, say N.
165 config SERIAL_KS8695
166 bool "Micrel KS8695 (Centaur) serial port support"
167 depends on ARCH_KS8695
168 select SERIAL_CORE
169 help
170 This selects the Micrel Centaur KS8695 UART. Say Y here.
172 config SERIAL_KS8695_CONSOLE
173 bool "Support for console on KS8695 (Centaur) serial port"
174 depends on SERIAL_KS8695=y
175 select SERIAL_CORE_CONSOLE
176 help
177 Say Y here if you wish to use a KS8695 (Centaur) UART as the
178 system console (the system console is the device which
179 receives all kernel messages and warnings and which allows
180 logins in single user mode).
182 config SERIAL_CLPS711X
183 tristate "CLPS711X serial port support"
184 depends on ARCH_CLPS711X
185 select SERIAL_CORE
186 default y
187 help
188 This enables the driver for the on-chip UARTs of the Cirrus
189 Logic EP711x/EP721x/EP731x processors.
191 config SERIAL_CLPS711X_CONSOLE
192 bool "Support for console on CLPS711X serial port"
193 depends on SERIAL_CLPS711X=y
194 select SERIAL_CORE_CONSOLE
195 help
196 Even if you say Y here, the currently visible virtual console
197 (/dev/tty0) will still be used as the system console by default, but
198 you can alter that using a kernel command line option such as
199 "console=ttyCL1".
201 config SERIAL_SAMSUNG
202 tristate "Samsung SoC serial support"
203 depends on PLAT_SAMSUNG
204 select SERIAL_CORE
205 help
206 Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
207 providing /dev/ttySAC0, 1 and 2 (note, some machines may not
208 provide all of these ports, depending on how the serial port
209 pins are configured.
211 config SERIAL_SAMSUNG_UARTS_4
212 bool
213 depends on PLAT_SAMSUNG
214 default y if !(CPU_S3C2410 || CPU_S3C2412 || CPU_S3C2440 || CPU_S3C2442)
215 help
216 Internal node for the common case of 4 Samsung compatible UARTs
218 config SERIAL_SAMSUNG_UARTS
219 int
220 depends on PLAT_SAMSUNG
221 default 6 if CPU_S5P6450
222 default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416
223 default 3
224 help
225 Select the number of available UART ports for the Samsung S3C
226 serial driver
228 config SERIAL_SAMSUNG_DEBUG
229 bool "Samsung SoC serial debug"
230 depends on SERIAL_SAMSUNG && DEBUG_LL
231 help
232 Add support for debugging the serial driver. Since this is
233 generally being used as a console, we use our own output
234 routines that go via the low-level debug printascii()
235 function.
237 config SERIAL_SAMSUNG_CONSOLE
238 bool "Support for console on Samsung SoC serial port"
239 depends on SERIAL_SAMSUNG=y
240 select SERIAL_CORE_CONSOLE
241 help
242 Allow selection of the S3C24XX on-board serial ports for use as
243 an virtual console.
245 Even if you say Y here, the currently visible virtual console
246 (/dev/tty0) will still be used as the system console by default, but
247 you can alter that using a kernel command line option such as
248 "console=ttySACx". (Try "man bootparam" or see the documentation of
249 your boot loader about how to pass options to the kernel at
250 boot time.)
252 config SERIAL_SIRFSOC
253 tristate "SiRF SoC Platform Serial port support"
254 depends on ARCH_SIRF
255 select SERIAL_CORE
256 help
257 Support for the on-chip UART on the CSR SiRFprimaII series,
258 providing /dev/ttySiRF0, 1 and 2 (note, some machines may not
259 provide all of these ports, depending on how the serial port
260 pins are configured).
262 config SERIAL_SIRFSOC_CONSOLE
263 bool "Support for console on SiRF SoC serial port"
264 depends on SERIAL_SIRFSOC=y
265 select SERIAL_CORE_CONSOLE
266 help
267 Even if you say Y here, the currently visible virtual console
268 (/dev/tty0) will still be used as the system console by default, but
269 you can alter that using a kernel command line option such as
270 "console=ttySiRFx". (Try "man bootparam" or see the documentation of
271 your boot loader about how to pass options to the kernel at
272 boot time.)
274 config SERIAL_TEGRA
275 tristate "NVIDIA Tegra20/30 SoC serial controller"
276 depends on ARCH_TEGRA && TEGRA20_APB_DMA
277 select SERIAL_CORE
278 help
279 Support for the on-chip UARTs on the NVIDIA Tegra series SOCs
280 providing /dev/ttyTHS0, 1, 2, 3 and 4 (note, some machines may not
281 provide all of these ports, depending on how the serial port
282 are enabled). This driver uses the APB DMA to achieve higher baudrate
283 and better performance.
285 config SERIAL_MAX3100
286 tristate "MAX3100 support"
287 depends on SPI
288 select SERIAL_CORE
289 help
290 MAX3100 chip support
292 config SERIAL_MAX310X
293 bool "MAX310X support"
294 depends on SPI_MASTER
295 select SERIAL_CORE
296 select REGMAP_SPI if SPI_MASTER
297 default n
298 help
299 This selects support for an advanced UART from Maxim (Dallas).
300 Supported ICs are MAX3107, MAX3108, MAX3109, MAX14830.
301 Each IC contains 128 words each of receive and transmit FIFO
302 that can be controlled through I2C or high-speed SPI.
304 Say Y here if you want to support this ICs.
306 config SERIAL_DZ
307 bool "DECstation DZ serial driver"
308 depends on MACH_DECSTATION && 32BIT
309 select SERIAL_CORE
310 default y
311 ---help---
312 DZ11-family serial controllers for DECstations and VAXstations,
313 including the DC7085, M7814, and M7819.
315 config SERIAL_DZ_CONSOLE
316 bool "Support console on DECstation DZ serial driver"
317 depends on SERIAL_DZ=y
318 select SERIAL_CORE_CONSOLE
319 default y
320 ---help---
321 If you say Y here, it will be possible to use a serial port as the
322 system console (the system console is the device which receives all
323 kernel messages and warnings and which allows logins in single user
324 mode).
326 Note that the firmware uses ttyS3 as the serial console on
327 DECstations that use this driver.
329 If unsure, say Y.
331 config SERIAL_ZS
332 tristate "DECstation Z85C30 serial support"
333 depends on MACH_DECSTATION
334 select SERIAL_CORE
335 default y
336 ---help---
337 Support for the Zilog 85C350 serial communications controller used
338 for serial ports in newer DECstation systems. These include the
339 DECsystem 5900 and all models of the DECstation and DECsystem 5000
340 systems except from model 200.
342 If unsure, say Y. To compile this driver as a module, choose M here:
343 the module will be called zs.
345 config SERIAL_ZS_CONSOLE
346 bool "Support for console on a DECstation Z85C30 serial port"
347 depends on SERIAL_ZS=y
348 select SERIAL_CORE_CONSOLE
349 default y
350 ---help---
351 If you say Y here, it will be possible to use a serial port as the
352 system console (the system console is the device which receives all
353 kernel messages and warnings and which allows logins in single user
354 mode).
356 Note that the firmware uses ttyS1 as the serial console on the
357 Maxine and ttyS3 on the others using this driver.
359 If unsure, say Y.
361 config SERIAL_21285
362 tristate "DC21285 serial port support"
363 depends on FOOTBRIDGE
364 select SERIAL_CORE
365 help
366 If you have a machine based on a 21285 (Footbridge) StrongARM(R)/
367 PCI bridge you can enable its onboard serial port by enabling this
368 option.
370 config SERIAL_21285_CONSOLE
371 bool "Console on DC21285 serial port"
372 depends on SERIAL_21285=y
373 select SERIAL_CORE_CONSOLE
374 help
375 If you have enabled the serial port on the 21285 footbridge you can
376 make it the console by answering Y to this option.
378 Even if you say Y here, the currently visible virtual console
379 (/dev/tty0) will still be used as the system console by default, but
380 you can alter that using a kernel command line option such as
381 "console=ttyFB". (Try "man bootparam" or see the documentation of
382 your boot loader (lilo or loadlin) about how to pass options to the
383 kernel at boot time.)
385 config SERIAL_MPSC
386 bool "Marvell MPSC serial port support"
387 depends on MV64X60
388 select SERIAL_CORE
389 help
390 Say Y here if you want to use the Marvell MPSC serial controller.
392 config SERIAL_MPSC_CONSOLE
393 bool "Support for console on Marvell MPSC serial port"
394 depends on SERIAL_MPSC
395 select SERIAL_CORE_CONSOLE
396 help
397 Say Y here if you want to support a serial console on a Marvell MPSC.
399 config SERIAL_PXA
400 bool "PXA serial port support"
401 depends on ARCH_PXA || ARCH_MMP
402 select SERIAL_CORE
403 help
404 If you have a machine based on an Intel XScale PXA2xx CPU you
405 can enable its onboard serial ports by enabling this option.
407 config SERIAL_PXA_CONSOLE
408 bool "Console on PXA serial port"
409 depends on SERIAL_PXA
410 select SERIAL_CORE_CONSOLE
411 help
412 If you have enabled the serial port on the Intel XScale PXA
413 CPU you can make it the console by answering Y to this option.
415 Even if you say Y here, the currently visible virtual console
416 (/dev/tty0) will still be used as the system console by default, but
417 you can alter that using a kernel command line option such as
418 "console=ttySA0". (Try "man bootparam" or see the documentation of
419 your boot loader (lilo or loadlin) about how to pass options to the
420 kernel at boot time.)
422 config SERIAL_SA1100
423 bool "SA1100 serial port support"
424 depends on ARCH_SA1100
425 select SERIAL_CORE
426 help
427 If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you
428 can enable its onboard serial port by enabling this option.
429 Please read <file:Documentation/arm/SA1100/serial_UART> for further
430 info.
432 config SERIAL_SA1100_CONSOLE
433 bool "Console on SA1100 serial port"
434 depends on SERIAL_SA1100
435 select SERIAL_CORE_CONSOLE
436 help
437 If you have enabled the serial port on the SA1100/SA1110 StrongARM
438 CPU you can make it the console by answering Y to this option.
440 Even if you say Y here, the currently visible virtual console
441 (/dev/tty0) will still be used as the system console by default, but
442 you can alter that using a kernel command line option such as
443 "console=ttySA0". (Try "man bootparam" or see the documentation of
444 your boot loader (lilo or loadlin) about how to pass options to the
445 kernel at boot time.)
447 config SERIAL_MRST_MAX3110
448 tristate "SPI UART driver for Max3110"
449 depends on SPI_DW_PCI
450 select SERIAL_CORE
451 select SERIAL_CORE_CONSOLE
452 help
453 This is the UART protocol driver for the MAX3110 device on
454 the Intel Moorestown platform. On other systems use the max3100
455 driver.
457 config SERIAL_MFD_HSU
458 tristate "Medfield High Speed UART support"
459 depends on PCI
460 select SERIAL_CORE
462 config SERIAL_MFD_HSU_CONSOLE
463 boolean "Medfile HSU serial console support"
464 depends on SERIAL_MFD_HSU=y
465 select SERIAL_CORE_CONSOLE
467 config SERIAL_BFIN
468 tristate "Blackfin serial port support"
469 depends on BLACKFIN
470 select SERIAL_CORE
471 select SERIAL_BFIN_UART0 if (BF531 || BF532 || BF533 || BF561)
472 help
473 Add support for the built-in UARTs on the Blackfin.
475 To compile this driver as a module, choose M here: the
476 module is named bfin_uart.ko.
478 config SERIAL_BFIN_CONSOLE
479 bool "Console on Blackfin serial port"
480 depends on SERIAL_BFIN=y
481 select SERIAL_CORE_CONSOLE
483 choice
484 prompt "UART Mode"
485 depends on SERIAL_BFIN
486 default SERIAL_BFIN_DMA
487 help
488 This driver supports the built-in serial ports of the Blackfin family
489 of CPUs
491 config SERIAL_BFIN_DMA
492 bool "DMA mode"
493 depends on !DMA_UNCACHED_NONE && KGDB_SERIAL_CONSOLE=n
494 help
495 This driver works under DMA mode. If this option is selected, the
496 blackfin simple dma driver is also enabled.
498 config SERIAL_BFIN_PIO
499 bool "PIO mode"
500 help
501 This driver works under PIO mode.
503 endchoice
505 config SERIAL_BFIN_UART0
506 bool "Enable UART0"
507 depends on SERIAL_BFIN
508 help
509 Enable UART0
511 config BFIN_UART0_CTSRTS
512 bool "Enable UART0 hardware flow control"
513 depends on SERIAL_BFIN_UART0
514 help
515 Enable hardware flow control in the driver.
517 config SERIAL_BFIN_UART1
518 bool "Enable UART1"
519 depends on SERIAL_BFIN && (!BF531 && !BF532 && !BF533 && !BF561)
520 help
521 Enable UART1
523 config BFIN_UART1_CTSRTS
524 bool "Enable UART1 hardware flow control"
525 depends on SERIAL_BFIN_UART1
526 help
527 Enable hardware flow control in the driver.
529 config SERIAL_BFIN_UART2
530 bool "Enable UART2"
531 depends on SERIAL_BFIN && (BF54x || BF538 || BF539)
532 help
533 Enable UART2
535 config BFIN_UART2_CTSRTS
536 bool "Enable UART2 hardware flow control"
537 depends on SERIAL_BFIN_UART2
538 help
539 Enable hardware flow control in the driver.
541 config SERIAL_BFIN_UART3
542 bool "Enable UART3"
543 depends on SERIAL_BFIN && (BF54x)
544 help
545 Enable UART3
547 config BFIN_UART3_CTSRTS
548 bool "Enable UART3 hardware flow control"
549 depends on SERIAL_BFIN_UART3
550 help
551 Enable hardware flow control in the driver.
553 config SERIAL_IMX
554 tristate "IMX serial port support"
555 depends on ARCH_MXC
556 select SERIAL_CORE
557 select RATIONAL
558 help
559 If you have a machine based on a Motorola IMX CPU you
560 can enable its onboard serial port by enabling this option.
562 config SERIAL_IMX_CONSOLE
563 bool "Console on IMX serial port"
564 depends on SERIAL_IMX=y
565 select SERIAL_CORE_CONSOLE
566 help
567 If you have enabled the serial port on the Freescale IMX
568 CPU you can make it the console by answering Y to this option.
570 Even if you say Y here, the currently visible virtual console
571 (/dev/tty0) will still be used as the system console by default, but
572 you can alter that using a kernel command line option such as
573 "console=ttymxc0". (Try "man bootparam" or see the documentation of
574 your bootloader about how to pass options to the kernel at boot time.)
576 config SERIAL_UARTLITE
577 tristate "Xilinx uartlite serial port support"
578 depends on PPC32 || MICROBLAZE || MFD_TIMBERDALE || ARCH_ZYNQ
579 select SERIAL_CORE
580 help
581 Say Y here if you want to use the Xilinx uartlite serial controller.
583 To compile this driver as a module, choose M here: the
584 module will be called uartlite.
586 config SERIAL_UARTLITE_CONSOLE
587 bool "Support for console on Xilinx uartlite serial port"
588 depends on SERIAL_UARTLITE=y
589 select SERIAL_CORE_CONSOLE
590 help
591 Say Y here if you wish to use a Xilinx uartlite as the system
592 console (the system console is the device which receives all kernel
593 messages and warnings and which allows logins in single user mode).
595 config SERIAL_SUNCORE
596 bool
597 depends on SPARC
598 select SERIAL_CORE
599 select SERIAL_CORE_CONSOLE
600 default y
602 config SERIAL_SUNZILOG
603 tristate "Sun Zilog8530 serial support"
604 depends on SPARC
605 help
606 This driver supports the Zilog8530 serial ports found on many Sparc
607 systems. Say Y or M if you want to be able to these serial ports.
609 config SERIAL_SUNZILOG_CONSOLE
610 bool "Console on Sun Zilog8530 serial port"
611 depends on SERIAL_SUNZILOG=y
612 help
613 If you would like to be able to use the Zilog8530 serial port
614 on your Sparc system as the console, you can do so by answering
615 Y to this option.
617 config SERIAL_SUNSU
618 tristate "Sun SU serial support"
619 depends on SPARC && PCI
620 help
621 This driver supports the 8250 serial ports that run the keyboard and
622 mouse on (PCI) UltraSPARC systems. Say Y or M if you want to be able
623 to these serial ports.
625 config SERIAL_SUNSU_CONSOLE
626 bool "Console on Sun SU serial port"
627 depends on SERIAL_SUNSU=y
628 help
629 If you would like to be able to use the SU serial port
630 on your Sparc system as the console, you can do so by answering
631 Y to this option.
633 config SERIAL_MUX
634 tristate "Serial MUX support"
635 depends on GSC
636 select SERIAL_CORE
637 default y
638 ---help---
639 Saying Y here will enable the hardware MUX serial driver for
640 the Nova, K class systems and D class with a 'remote control card'.
641 The hardware MUX is not 8250/16550 compatible therefore the
642 /dev/ttyB0 device is shared between the Serial MUX and the PDC
643 software console. The following steps need to be completed to use
644 the Serial MUX:
646 1. create the device entry (mknod /dev/ttyB0 c 11 0)
647 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0
648 3. Add device ttyB0 to /etc/securetty (if you want to log on as
649 root on this console.)
650 4. Change the kernel command console parameter to: console=ttyB0
652 config SERIAL_MUX_CONSOLE
653 bool "Support for console on serial MUX"
654 depends on SERIAL_MUX=y
655 select SERIAL_CORE_CONSOLE
656 default y
658 config PDC_CONSOLE
659 bool "PDC software console support"
660 depends on PARISC && !SERIAL_MUX && VT
661 default n
662 help
663 Saying Y here will enable the software based PDC console to be
664 used as the system console. This is useful for machines in
665 which the hardware based console has not been written yet. The
666 following steps must be competed to use the PDC console:
668 1. create the device entry (mknod /dev/ttyB0 c 11 0)
669 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0
670 3. Add device ttyB0 to /etc/securetty (if you want to log on as
671 root on this console.)
672 4. Change the kernel command console parameter to: console=ttyB0
674 config SERIAL_SUNSAB
675 tristate "Sun Siemens SAB82532 serial support"
676 depends on SPARC && PCI
677 help
678 This driver supports the Siemens SAB82532 DUSCC serial ports on newer
679 (PCI) UltraSPARC systems. Say Y or M if you want to be able to these
680 serial ports.
682 config SERIAL_SUNSAB_CONSOLE
683 bool "Console on Sun Siemens SAB82532 serial port"
684 depends on SERIAL_SUNSAB=y
685 help
686 If you would like to be able to use the SAB82532 serial port
687 on your Sparc system as the console, you can do so by answering
688 Y to this option.
690 config SERIAL_SUNHV
691 bool "Sun4v Hypervisor Console support"
692 depends on SPARC64
693 help
694 This driver supports the console device found on SUN4V Sparc
695 systems. Say Y if you want to be able to use this device.
697 config SERIAL_IP22_ZILOG
698 tristate "SGI Zilog8530 serial support"
699 depends on SGI_HAS_ZILOG
700 select SERIAL_CORE
701 help
702 This driver supports the Zilog8530 serial ports found on SGI
703 systems. Say Y or M if you want to be able to these serial ports.
705 config SERIAL_IP22_ZILOG_CONSOLE
706 bool "Console on SGI Zilog8530 serial port"
707 depends on SERIAL_IP22_ZILOG=y
708 select SERIAL_CORE_CONSOLE
710 config SERIAL_SH_SCI
711 tristate "SuperH SCI(F) serial port support"
712 depends on HAVE_CLK && (SUPERH || ARCH_SHMOBILE)
713 select SERIAL_CORE
715 config SERIAL_SH_SCI_NR_UARTS
716 int "Maximum number of SCI(F) serial ports"
717 depends on SERIAL_SH_SCI
718 default "2"
720 config SERIAL_SH_SCI_CONSOLE
721 bool "Support for console on SuperH SCI(F)"
722 depends on SERIAL_SH_SCI=y
723 select SERIAL_CORE_CONSOLE
725 config SERIAL_SH_SCI_DMA
726 bool "DMA support"
727 depends on SERIAL_SH_SCI && SH_DMAE
729 config SERIAL_PNX8XXX
730 bool "Enable PNX8XXX SoCs' UART Support"
731 depends on SOC_PNX833X
732 select SERIAL_CORE
733 help
734 If you have a MIPS-based Philips SoC such as PNX8330 and you want
735 to use serial ports, say Y. Otherwise, say N.
737 config SERIAL_PNX8XXX_CONSOLE
738 bool "Enable PNX8XX0 serial console"
739 depends on SERIAL_PNX8XXX
740 select SERIAL_CORE_CONSOLE
741 help
742 If you have a MIPS-based Philips SoC such as PNX8330 and you want
743 to use serial console, say Y. Otherwise, say N.
745 config SERIAL_HS_LPC32XX
746 tristate "LPC32XX high speed serial port support"
747 depends on ARCH_LPC32XX && OF
748 select SERIAL_CORE
749 help
750 Support for the LPC32XX high speed serial ports (up to 900kbps).
751 Those are UARTs completely different from the Standard UARTs on the
752 LPC32XX SoC.
753 Choose M or Y here to build this driver.
755 config SERIAL_HS_LPC32XX_CONSOLE
756 bool "Enable LPC32XX high speed UART serial console"
757 depends on SERIAL_HS_LPC32XX
758 select SERIAL_CORE_CONSOLE
759 help
760 If you would like to be able to use one of the high speed serial
761 ports on the LPC32XX as the console, you can do so by answering
762 Y to this option.
764 config SERIAL_CORE
765 tristate
767 config SERIAL_CORE_CONSOLE
768 bool
770 config CONSOLE_POLL
771 bool
773 config SERIAL_68328
774 bool "68328 serial support"
775 depends on M68328 || M68EZ328 || M68VZ328
776 help
777 This driver supports the built-in serial port of the Motorola 68328
778 (standard, EZ and VZ varieties).
780 config SERIAL_68328_RTS_CTS
781 bool "Support RTS/CTS on 68328 serial port"
782 depends on SERIAL_68328
784 config SERIAL_MCF
785 bool "Coldfire serial support"
786 depends on COLDFIRE
787 select SERIAL_CORE
788 help
789 This serial driver supports the Freescale Coldfire serial ports.
791 config SERIAL_MCF_BAUDRATE
792 int "Default baudrate for Coldfire serial ports"
793 depends on SERIAL_MCF
794 default 19200
795 help
796 This setting lets you define what the default baudrate is for the
797 ColdFire serial ports. The usual default varies from board to board,
798 and this setting is a way of catering for that.
800 config SERIAL_MCF_CONSOLE
801 bool "Coldfire serial console support"
802 depends on SERIAL_MCF
803 select SERIAL_CORE_CONSOLE
804 help
805 Enable a ColdFire internal serial port to be the system console.
807 config SERIAL_PMACZILOG
808 tristate "Mac or PowerMac z85c30 ESCC support"
809 depends on (M68K && MAC) || (PPC_OF && PPC_PMAC)
810 select SERIAL_CORE
811 help
812 This driver supports the Zilog z85C30 serial ports found on
813 (Power)Mac machines.
814 Say Y or M if you want to be able to these serial ports.
816 config SERIAL_PMACZILOG_TTYS
817 bool "Use ttySn device nodes for Zilog z85c30"
818 depends on SERIAL_PMACZILOG
819 help
820 The pmac_zilog driver for the z85C30 chip on many powermacs
821 historically used the device numbers for /dev/ttySn. The
822 8250 serial port driver also uses these numbers, which means
823 the two drivers being unable to coexist; you could not use
824 both z85C30 and 8250 type ports at the same time.
826 If this option is not selected, the pmac_zilog driver will
827 use the device numbers allocated for /dev/ttyPZn. This allows
828 the pmac_zilog and 8250 drivers to co-exist, but may cause
829 existing userspace setups to break. Programs that need to
830 access the built-in serial ports on powermacs will need to
831 be reconfigured to use /dev/ttyPZn instead of /dev/ttySn.
833 If you enable this option, any z85c30 ports in the system will
834 be registered as ttyS0 onwards as in the past, and you will be
835 unable to use the 8250 module for PCMCIA or other 16C550-style
836 UARTs.
838 Say N unless you need the z85c30 ports on your (Power)Mac
839 to appear as /dev/ttySn.
841 config SERIAL_PMACZILOG_CONSOLE
842 bool "Console on Mac or PowerMac z85c30 serial port"
843 depends on SERIAL_PMACZILOG=y
844 select SERIAL_CORE_CONSOLE
845 help
846 If you would like to be able to use the z85c30 serial port
847 on your (Power)Mac as the console, you can do so by answering
848 Y to this option.
850 config SERIAL_CPM
851 tristate "CPM SCC/SMC serial port support"
852 depends on CPM2 || 8xx
853 select SERIAL_CORE
854 help
855 This driver supports the SCC and SMC serial ports on Motorola
856 embedded PowerPC that contain a CPM1 (8xx) or CPM2 (8xxx)
858 config SERIAL_CPM_CONSOLE
859 bool "Support for console on CPM SCC/SMC serial port"
860 depends on SERIAL_CPM=y
861 select SERIAL_CORE_CONSOLE
862 help
863 Say Y here if you wish to use a SCC or SMC CPM UART as the system
864 console (the system console is the device which receives all kernel
865 messages and warnings and which allows logins in single user mode).
867 Even if you say Y here, the currently visible framebuffer console
868 (/dev/tty0) will still be used as the system console by default, but
869 you can alter that using a kernel command line option such as
870 "console=ttyCPM0". (Try "man bootparam" or see the documentation of
871 your boot loader (lilo or loadlin) about how to pass options to the
872 kernel at boot time.)
874 config SERIAL_SGI_L1_CONSOLE
875 bool "SGI Altix L1 serial console support"
876 depends on IA64_GENERIC || IA64_SGI_SN2
877 select SERIAL_CORE
878 select SERIAL_CORE_CONSOLE
879 help
880 If you have an SGI Altix and you would like to use the system
881 controller serial port as your console (you want this!),
882 say Y. Otherwise, say N.
884 config SERIAL_MPC52xx
885 tristate "Freescale MPC52xx/MPC512x family PSC serial support"
886 depends on PPC_MPC52xx || PPC_MPC512x
887 select SERIAL_CORE
888 help
889 This driver supports MPC52xx and MPC512x PSC serial ports. If you would
890 like to use them, you must answer Y or M to this option. Note that
891 for use as console, it must be included in kernel and not as a
892 module.
894 config SERIAL_MPC52xx_CONSOLE
895 bool "Console on a Freescale MPC52xx/MPC512x family PSC serial port"
896 depends on SERIAL_MPC52xx=y
897 select SERIAL_CORE_CONSOLE
898 help
899 Select this options if you'd like to use one of the PSC serial port
900 of the Freescale MPC52xx family as a console.
902 config SERIAL_MPC52xx_CONSOLE_BAUD
903 int "Freescale MPC52xx/MPC512x family PSC serial port baud"
904 depends on SERIAL_MPC52xx_CONSOLE=y
905 default "9600"
906 help
907 Select the MPC52xx console baud rate.
908 This value is only used if the bootloader doesn't pass in the
909 console baudrate
911 config SERIAL_ICOM
912 tristate "IBM Multiport Serial Adapter"
913 depends on PCI && PPC_PSERIES
914 select SERIAL_CORE
915 select FW_LOADER
916 help
917 This driver is for a family of multiport serial adapters
918 including 2 port RVX, 2 port internal modem, 4 port internal
919 modem and a split 1 port RVX and 1 port internal modem.
921 This driver can also be built as a module. If so, the module
922 will be called icom.
924 config SERIAL_M32R_SIO
925 bool "M32R SIO I/F"
926 depends on M32R
927 default y
928 select SERIAL_CORE
929 help
930 Say Y here if you want to use the M32R serial controller.
932 config SERIAL_M32R_SIO_CONSOLE
933 bool "use SIO console"
934 depends on SERIAL_M32R_SIO=y
935 select SERIAL_CORE_CONSOLE
936 help
937 Say Y here if you want to support a serial console.
939 If you use an M3T-M32700UT or an OPSPUT platform,
940 please say also y for SERIAL_M32R_PLDSIO.
942 config SERIAL_M32R_PLDSIO
943 bool "M32R SIO I/F on a PLD"
944 depends on SERIAL_M32R_SIO=y && (PLAT_OPSPUT || PLAT_USRV || PLAT_M32700UT)
945 default n
946 help
947 Say Y here if you want to use the M32R serial controller
948 on a PLD (Programmable Logic Device).
950 If you use an M3T-M32700UT or an OPSPUT platform,
951 please say Y.
953 config SERIAL_TXX9
954 bool "TMPTX39XX/49XX SIO support"
955 depends on HAS_TXX9_SERIAL
956 select SERIAL_CORE
957 default y
959 config HAS_TXX9_SERIAL
960 bool
962 config SERIAL_TXX9_NR_UARTS
963 int "Maximum number of TMPTX39XX/49XX SIO ports"
964 depends on SERIAL_TXX9
965 default "6"
967 config SERIAL_TXX9_CONSOLE
968 bool "TMPTX39XX/49XX SIO Console support"
969 depends on SERIAL_TXX9=y
970 select SERIAL_CORE_CONSOLE
972 config SERIAL_TXX9_STDSERIAL
973 bool "TX39XX/49XX SIO act as standard serial"
974 depends on !SERIAL_8250 && SERIAL_TXX9
976 config SERIAL_VR41XX
977 tristate "NEC VR4100 series Serial Interface Unit support"
978 depends on CPU_VR41XX
979 select SERIAL_CORE
980 help
981 If you have a NEC VR4100 series processor and you want to use
982 Serial Interface Unit(SIU) or Debug Serial Interface Unit(DSIU)
983 (not include VR4111/VR4121 DSIU), say Y. Otherwise, say N.
985 config SERIAL_VR41XX_CONSOLE
986 bool "Enable NEC VR4100 series Serial Interface Unit console"
987 depends on SERIAL_VR41XX=y
988 select SERIAL_CORE_CONSOLE
989 help
990 If you have a NEC VR4100 series processor and you want to use
991 a console on a serial port, say Y. Otherwise, say N.
993 config SERIAL_JSM
994 tristate "Digi International NEO PCI Support"
995 depends on PCI
996 select SERIAL_CORE
997 help
998 This is a driver for Digi International's Neo series
999 of cards which provide multiple serial ports. You would need
1000 something like this to connect more than two modems to your Linux
1001 box, for instance in order to become a dial-in server. This driver
1002 supports PCI boards only.
1004 If you have a card like this, say Y here, otherwise say N.
1006 To compile this driver as a module, choose M here: the
1007 module will be called jsm.
1009 config SERIAL_SGI_IOC4
1010 tristate "SGI IOC4 controller serial support"
1011 depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC4
1012 select SERIAL_CORE
1013 help
1014 If you have an SGI Altix with an IOC4 based Base IO card
1015 and wish to use the serial ports on this card, say Y.
1016 Otherwise, say N.
1018 config SERIAL_SGI_IOC3
1019 tristate "SGI Altix IOC3 serial support"
1020 depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC3
1021 select SERIAL_CORE
1022 help
1023 If you have an SGI Altix with an IOC3 serial card,
1024 say Y or M. Otherwise, say N.
1026 config SERIAL_MSM
1027 bool "MSM on-chip serial port support"
1028 depends on ARCH_MSM
1029 select SERIAL_CORE
1031 config SERIAL_MSM_CONSOLE
1032 bool "MSM serial console support"
1033 depends on SERIAL_MSM=y
1034 select SERIAL_CORE_CONSOLE
1036 config SERIAL_MSM_HS
1037 tristate "MSM UART High Speed: Serial Driver"
1038 depends on ARCH_MSM
1039 select SERIAL_CORE
1040 help
1041 If you have a machine based on MSM family of SoCs, you
1042 can enable its onboard high speed serial port by enabling
1043 this option.
1045 Choose M here to compile it as a module. The module will be
1046 called msm_serial_hs.
1048 config SERIAL_VT8500
1049 bool "VIA VT8500 on-chip serial port support"
1050 depends on ARCH_VT8500
1051 select SERIAL_CORE
1053 config SERIAL_VT8500_CONSOLE
1054 bool "VIA VT8500 serial console support"
1055 depends on SERIAL_VT8500=y
1056 select SERIAL_CORE_CONSOLE
1058 config SERIAL_NETX
1059 tristate "NetX serial port support"
1060 depends on ARCH_NETX
1061 select SERIAL_CORE
1062 help
1063 If you have a machine based on a Hilscher NetX SoC you
1064 can enable its onboard serial port by enabling this option.
1066 To compile this driver as a module, choose M here: the
1067 module will be called netx-serial.
1069 config SERIAL_NETX_CONSOLE
1070 bool "Console on NetX serial port"
1071 depends on SERIAL_NETX=y
1072 select SERIAL_CORE_CONSOLE
1073 help
1074 If you have enabled the serial port on the Hilscher NetX SoC
1075 you can make it the console by answering Y to this option.
1077 config SERIAL_OF_PLATFORM
1078 tristate "Serial port on Open Firmware platform bus"
1079 depends on OF
1080 depends on SERIAL_8250 || SERIAL_OF_PLATFORM_NWPSERIAL
1081 help
1082 If you have a PowerPC based system that has serial ports
1083 on a platform specific bus, you should enable this option.
1084 Currently, only 8250 compatible ports are supported, but
1085 others can easily be added.
1087 config SERIAL_OMAP
1088 tristate "OMAP serial port support"
1089 depends on ARCH_OMAP2PLUS
1090 select SERIAL_CORE
1091 help
1092 If you have a machine based on an Texas Instruments OMAP CPU you
1093 can enable its onboard serial ports by enabling this option.
1095 By enabling this option you take advantage of dma feature available
1096 with the omap-serial driver. DMA support can be enabled from platform
1097 data.
1099 config SERIAL_OMAP_CONSOLE
1100 bool "Console on OMAP serial port"
1101 depends on SERIAL_OMAP=y
1102 select SERIAL_CORE_CONSOLE
1103 help
1104 Select this option if you would like to use omap serial port as
1105 console.
1107 Even if you say Y here, the currently visible virtual console
1108 (/dev/tty0) will still be used as the system console by default, but
1109 you can alter that using a kernel command line option such as
1110 "console=ttyOx". (Try "man bootparam" or see the documentation of
1111 your boot loader about how to pass options to the kernel at
1112 boot time.)
1114 config SERIAL_OF_PLATFORM_NWPSERIAL
1115 tristate "NWP serial port driver"
1116 depends on PPC_OF && PPC_DCR
1117 select SERIAL_OF_PLATFORM
1118 select SERIAL_CORE_CONSOLE
1119 select SERIAL_CORE
1120 help
1121 This driver supports the cell network processor nwp serial
1122 device.
1124 config SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE
1125 bool "Console on NWP serial port"
1126 depends on SERIAL_OF_PLATFORM_NWPSERIAL=y
1127 select SERIAL_CORE_CONSOLE
1128 help
1129 Support for Console on the NWP serial ports.
1131 config SERIAL_LANTIQ
1132 bool "Lantiq serial driver"
1133 depends on LANTIQ
1134 select SERIAL_CORE
1135 select SERIAL_CORE_CONSOLE
1136 help
1137 Support for console and UART on Lantiq SoCs.
1139 config SERIAL_QE
1140 tristate "Freescale QUICC Engine serial port support"
1141 depends on QUICC_ENGINE
1142 select SERIAL_CORE
1143 select FW_LOADER
1144 default n
1145 help
1146 This driver supports the QE serial ports on Freescale embedded
1147 PowerPC that contain a QUICC Engine.
1149 config SERIAL_SC26XX
1150 tristate "SC2681/SC2692 serial port support"
1151 depends on SNI_RM
1152 select SERIAL_CORE
1153 help
1154 This is a driver for the onboard serial ports of
1155 older RM400 machines.
1157 config SERIAL_SC26XX_CONSOLE
1158 bool "Console on SC2681/SC2692 serial port"
1159 depends on SERIAL_SC26XX=y
1160 select SERIAL_CORE_CONSOLE
1161 help
1162 Support for Console on SC2681/SC2692 serial ports.
1164 config SERIAL_SCCNXP
1165 tristate "SCCNXP serial port support"
1166 depends on !SERIAL_SC26XX
1167 select SERIAL_CORE
1168 default n
1169 help
1170 This selects support for an advanced UART from NXP (Philips).
1171 Supported ICs are SCC2681, SCC2691, SCC2692, SC28L91, SC28L92,
1172 SC28L202, SCC68681 and SCC68692.
1173 Positioned as a replacement for the driver SC26XX.
1175 config SERIAL_SCCNXP_CONSOLE
1176 bool "Console on SCCNXP serial port"
1177 depends on SERIAL_SCCNXP=y
1178 select SERIAL_CORE_CONSOLE
1179 help
1180 Support for console on SCCNXP serial ports.
1182 config SERIAL_BFIN_SPORT
1183 tristate "Blackfin SPORT emulate UART"
1184 depends on BLACKFIN
1185 select SERIAL_CORE
1186 help
1187 Enable SPORT emulate UART on Blackfin series.
1189 To compile this driver as a module, choose M here: the
1190 module will be called bfin_sport_uart.
1192 config SERIAL_BFIN_SPORT_CONSOLE
1193 bool "Console on Blackfin sport emulated uart"
1194 depends on SERIAL_BFIN_SPORT=y
1195 select SERIAL_CORE_CONSOLE
1197 config SERIAL_BFIN_SPORT0_UART
1198 bool "Enable UART over SPORT0"
1199 depends on SERIAL_BFIN_SPORT && !(BF542 || BF544)
1200 help
1201 Enable UART over SPORT0
1203 config SERIAL_BFIN_SPORT0_UART_CTSRTS
1204 bool "Enable UART over SPORT0 hardware flow control"
1205 depends on SERIAL_BFIN_SPORT0_UART
1206 help
1207 Enable hardware flow control in the driver.
1209 config SERIAL_BFIN_SPORT1_UART
1210 bool "Enable UART over SPORT1"
1211 depends on SERIAL_BFIN_SPORT
1212 help
1213 Enable UART over SPORT1
1215 config SERIAL_BFIN_SPORT1_UART_CTSRTS
1216 bool "Enable UART over SPORT1 hardware flow control"
1217 depends on SERIAL_BFIN_SPORT1_UART
1218 help
1219 Enable hardware flow control in the driver.
1221 config SERIAL_BFIN_SPORT2_UART
1222 bool "Enable UART over SPORT2"
1223 depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539)
1224 help
1225 Enable UART over SPORT2
1227 config SERIAL_BFIN_SPORT2_UART_CTSRTS
1228 bool "Enable UART over SPORT2 hardware flow control"
1229 depends on SERIAL_BFIN_SPORT2_UART
1230 help
1231 Enable hardware flow control in the driver.
1233 config SERIAL_BFIN_SPORT3_UART
1234 bool "Enable UART over SPORT3"
1235 depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539)
1236 help
1237 Enable UART over SPORT3
1239 config SERIAL_BFIN_SPORT3_UART_CTSRTS
1240 bool "Enable UART over SPORT3 hardware flow control"
1241 depends on SERIAL_BFIN_SPORT3_UART
1242 help
1243 Enable hardware flow control in the driver.
1245 config SERIAL_TIMBERDALE
1246 tristate "Support for timberdale UART"
1247 select SERIAL_CORE
1248 ---help---
1249 Add support for UART controller on timberdale.
1251 config SERIAL_BCM63XX
1252 tristate "bcm63xx serial port support"
1253 select SERIAL_CORE
1254 depends on BCM63XX
1255 help
1256 If you have a bcm63xx CPU, you can enable its onboard
1257 serial port by enabling this options.
1259 To compile this driver as a module, choose M here: the
1260 module will be called bcm963xx_uart.
1262 config SERIAL_BCM63XX_CONSOLE
1263 bool "Console on bcm63xx serial port"
1264 depends on SERIAL_BCM63XX=y
1265 select SERIAL_CORE_CONSOLE
1266 help
1267 If you have enabled the serial port on the bcm63xx CPU
1268 you can make it the console by answering Y to this option.
1270 config SERIAL_GRLIB_GAISLER_APBUART
1271 tristate "GRLIB APBUART serial support"
1272 depends on OF && SPARC
1273 select SERIAL_CORE
1274 ---help---
1275 Add support for the GRLIB APBUART serial port.
1277 config SERIAL_GRLIB_GAISLER_APBUART_CONSOLE
1278 bool "Console on GRLIB APBUART serial port"
1279 depends on SERIAL_GRLIB_GAISLER_APBUART=y
1280 select SERIAL_CORE_CONSOLE
1281 help
1282 Support for running a console on the GRLIB APBUART
1284 config SERIAL_ALTERA_JTAGUART
1285 tristate "Altera JTAG UART support"
1286 select SERIAL_CORE
1287 help
1288 This driver supports the Altera JTAG UART port.
1290 config SERIAL_ALTERA_JTAGUART_CONSOLE
1291 bool "Altera JTAG UART console support"
1292 depends on SERIAL_ALTERA_JTAGUART=y
1293 select SERIAL_CORE_CONSOLE
1294 help
1295 Enable a Altera JTAG UART port to be the system console.
1297 config SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS
1298 bool "Bypass output when no connection"
1299 depends on SERIAL_ALTERA_JTAGUART_CONSOLE
1300 select SERIAL_CORE_CONSOLE
1301 help
1302 Bypass console output and keep going even if there is no
1303 JTAG terminal connection with the host.
1305 config SERIAL_ALTERA_UART
1306 tristate "Altera UART support"
1307 select SERIAL_CORE
1308 help
1309 This driver supports the Altera softcore UART port.
1311 config SERIAL_ALTERA_UART_MAXPORTS
1312 int "Maximum number of Altera UART ports"
1313 depends on SERIAL_ALTERA_UART
1314 default 4
1315 help
1316 This setting lets you define the maximum number of the Altera
1317 UART ports. The usual default varies from board to board, and
1318 this setting is a way of catering for that.
1320 config SERIAL_ALTERA_UART_BAUDRATE
1321 int "Default baudrate for Altera UART ports"
1322 depends on SERIAL_ALTERA_UART
1323 default 115200
1324 help
1325 This setting lets you define what the default baudrate is for the
1326 Altera UART ports. The usual default varies from board to board,
1327 and this setting is a way of catering for that.
1329 config SERIAL_ALTERA_UART_CONSOLE
1330 bool "Altera UART console support"
1331 depends on SERIAL_ALTERA_UART=y
1332 select SERIAL_CORE_CONSOLE
1333 help
1334 Enable a Altera UART port to be the system console.
1336 config SERIAL_IFX6X60
1337 tristate "SPI protocol driver for Infineon 6x60 modem (EXPERIMENTAL)"
1338 depends on GPIOLIB && SPI
1339 help
1340 Support for the IFX6x60 modem devices on Intel MID platforms.
1342 config SERIAL_PCH_UART
1343 tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) UART"
1344 depends on PCI
1345 select SERIAL_CORE
1346 help
1347 This driver is for PCH(Platform controller Hub) UART of Intel EG20T
1348 which is an IOH(Input/Output Hub) for x86 embedded processor.
1349 Enabling PCH_DMA, this PCH UART works as DMA mode.
1351 This driver also can be used for LAPIS Semiconductor IOH(Input/
1352 Output Hub), ML7213, ML7223 and ML7831.
1353 ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
1354 for MP(Media Phone) use and ML7831 IOH is for general purpose use.
1355 ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
1356 ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
1358 config SERIAL_PCH_UART_CONSOLE
1359 bool "Support for console on Intel EG20T PCH UART/OKI SEMICONDUCTOR ML7213 IOH"
1360 depends on SERIAL_PCH_UART=y
1361 select SERIAL_CORE_CONSOLE
1362 help
1363 Say Y here if you wish to use the PCH UART as the system console
1364 (the system console is the device which receives all kernel messages and
1365 warnings and which allows logins in single user mode).
1367 config SERIAL_MSM_SMD
1368 bool "Enable tty device interface for some SMD ports"
1369 default n
1370 depends on MSM_SMD
1371 help
1372 Enables userspace clients to read and write to some streaming SMD
1373 ports via tty device interface for MSM chipset.
1375 config SERIAL_MXS_AUART
1376 depends on ARCH_MXS
1377 tristate "MXS AUART support"
1378 select SERIAL_CORE
1379 help
1380 This driver supports the MXS Application UART (AUART) port.
1382 config SERIAL_MXS_AUART_CONSOLE
1383 bool "MXS AUART console support"
1384 depends on SERIAL_MXS_AUART=y
1385 select SERIAL_CORE_CONSOLE
1386 help
1387 Enable a MXS AUART port to be the system console.
1389 config SERIAL_XILINX_PS_UART
1390 tristate "Xilinx PS UART support"
1391 depends on OF
1392 select SERIAL_CORE
1393 help
1394 This driver supports the Xilinx PS UART port.
1396 config SERIAL_XILINX_PS_UART_CONSOLE
1397 bool "Xilinx PS UART console support"
1398 depends on SERIAL_XILINX_PS_UART=y
1399 select SERIAL_CORE_CONSOLE
1400 help
1401 Enable a Xilinx PS UART port to be the system console.
1403 config SERIAL_AR933X
1404 tristate "AR933X serial port support"
1405 depends on HAVE_CLK && SOC_AR933X
1406 select SERIAL_CORE
1407 help
1408 If you have an Atheros AR933X SOC based board and want to use the
1409 built-in UART of the SoC, say Y to this option.
1411 To compile this driver as a module, choose M here: the
1412 module will be called ar933x_uart.
1414 config SERIAL_AR933X_CONSOLE
1415 bool "Console on AR933X serial port"
1416 depends on SERIAL_AR933X=y
1417 select SERIAL_CORE_CONSOLE
1418 help
1419 Enable a built-in UART port of the AR933X to be the system console.
1421 config SERIAL_AR933X_NR_UARTS
1422 int "Maximum number of AR933X serial ports"
1423 depends on SERIAL_AR933X
1424 default "2"
1425 help
1426 Set this to the number of serial ports you want the driver
1427 to support.
1429 config SERIAL_EFM32_UART
1430 tristate "EFM32 UART/USART port"
1431 depends on ARM && (ARCH_EFM32 || COMPILE_TEST)
1432 select SERIAL_CORE
1433 help
1434 This driver support the USART and UART ports on
1435 Energy Micro's efm32 SoCs.
1437 config SERIAL_EFM32_UART_CONSOLE
1438 bool "EFM32 UART/USART console support"
1439 depends on SERIAL_EFM32_UART=y
1440 select SERIAL_CORE_CONSOLE
1442 config SERIAL_TILEGX
1443 tristate "TILE-Gx on-chip serial port support"
1444 depends on TILEGX
1445 select TILE_GXIO_UART
1446 select SERIAL_CORE
1447 ---help---
1448 This device provides access to the on-chip UARTs on the TILE-Gx
1449 processor.
1451 config SERIAL_ARC
1452 tristate "ARC UART driver support"
1453 select SERIAL_CORE
1454 help
1455 Driver for on-chip UART for ARC(Synopsys) for the legacy
1456 FPGA Boards (ML50x/ARCAngel4)
1458 config SERIAL_ARC_CONSOLE
1459 bool "Console on ARC UART"
1460 depends on SERIAL_ARC=y
1461 select SERIAL_CORE_CONSOLE
1462 help
1463 Enable system Console on ARC UART
1465 config SERIAL_ARC_NR_PORTS
1466 int "Number of ARC UART ports"
1467 depends on SERIAL_ARC
1468 range 1 3
1469 default "1"
1470 help
1471 Set this to the number of serial ports you want the driver
1472 to support.
1474 config SERIAL_RP2
1475 tristate "Comtrol RocketPort EXPRESS/INFINITY support"
1476 depends on PCI
1477 select SERIAL_CORE
1478 help
1479 This driver supports the Comtrol RocketPort EXPRESS and
1480 RocketPort INFINITY families of PCI/PCIe multiport serial adapters.
1481 These adapters use a "RocketPort 2" ASIC that is not compatible
1482 with the original RocketPort driver (CONFIG_ROCKETPORT).
1484 To compile this driver as a module, choose M here: the
1485 module will be called rp2.
1487 If you want to compile this driver into the kernel, say Y here. If
1488 you don't have a suitable RocketPort card installed, say N.
1490 config SERIAL_RP2_NR_UARTS
1491 int "Maximum number of RocketPort EXPRESS/INFINITY ports"
1492 depends on SERIAL_RP2
1493 default "32"
1494 help
1495 If multiple cards are present, the default limit of 32 ports may
1496 need to be increased.
1498 config SERIAL_FSL_LPUART
1499 tristate "Freescale lpuart serial port support"
1500 select SERIAL_CORE
1501 help
1502 Support for the on-chip lpuart on some Freescale SOCs.
1504 config SERIAL_FSL_LPUART_CONSOLE
1505 bool "Console on Freescale lpuart serial port"
1506 depends on SERIAL_FSL_LPUART=y
1507 select SERIAL_CORE_CONSOLE
1508 help
1509 If you have enabled the lpuart serial port on the Freescale SoCs,
1510 you can make it the console by answering Y to this option.
1512 config SERIAL_ST_ASC
1513 tristate "ST ASC serial port support"
1514 select SERIAL_CORE
1515 help
1516 This driver is for the on-chip Asychronous Serial Controller on
1517 STMicroelectronics STi SoCs.
1518 ASC is embedded in ST COMMS IP block. It supports Rx & Tx functionality.
1519 It support all industry standard baud rates.
1521 If unsure, say N.
1523 config SERIAL_ST_ASC_CONSOLE
1524 bool "Support for console on ST ASC"
1525 depends on SERIAL_ST_ASC=y
1526 select SERIAL_CORE_CONSOLE
1528 endmenu
1530 endif # TTY