?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Linux 3.12.39
[linux/fpc-iii.git] / drivers / tty / serial / lpc32xx_hs.c
blob701644f06820db0a9dbe052d560a0d1bf3f342be
1 /*
2 * High Speed Serial Ports on NXP LPC32xx SoC
3 *
4 * Authors: Kevin Wells <kevin.wells@nxp.com>
5 * Roland Stigge <stigge@antcom.de>
6 *
7 * Copyright (C) 2010 NXP Semiconductors
8 * Copyright (C) 2012 Roland Stigge
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 */
20
21 #include <linux/module.h>
22 #include <linux/ioport.h>
23 #include <linux/init.h>
24 #include <linux/console.h>
25 #include <linux/sysrq.h>
26 #include <linux/tty.h>
27 #include <linux/tty_flip.h>
28 #include <linux/serial_core.h>
29 #include <linux/serial.h>
30 #include <linux/platform_device.h>
31 #include <linux/delay.h>
32 #include <linux/nmi.h>
33 #include <linux/io.h>
34 #include <linux/irq.h>
35 #include <linux/gpio.h>
36 #include <linux/of.h>
37 #include <mach/platform.h>
38 #include <mach/hardware.h>
39
40 /*
41 * High Speed UART register offsets
42 */
43 #define LPC32XX_HSUART_FIFO(x) ((x) + 0x00)
44 #define LPC32XX_HSUART_LEVEL(x) ((x) + 0x04)
45 #define LPC32XX_HSUART_IIR(x) ((x) + 0x08)
46 #define LPC32XX_HSUART_CTRL(x) ((x) + 0x0C)
47 #define LPC32XX_HSUART_RATE(x) ((x) + 0x10)
48
49 #define LPC32XX_HSU_BREAK_DATA (1 << 10)
50 #define LPC32XX_HSU_ERROR_DATA (1 << 9)
51 #define LPC32XX_HSU_RX_EMPTY (1 << 8)
52
53 #define LPC32XX_HSU_TX_LEV(n) (((n) >> 8) & 0xFF)
54 #define LPC32XX_HSU_RX_LEV(n) ((n) & 0xFF)
55
56 #define LPC32XX_HSU_TX_INT_SET (1 << 6)
57 #define LPC32XX_HSU_RX_OE_INT (1 << 5)
58 #define LPC32XX_HSU_BRK_INT (1 << 4)
59 #define LPC32XX_HSU_FE_INT (1 << 3)
60 #define LPC32XX_HSU_RX_TIMEOUT_INT (1 << 2)
61 #define LPC32XX_HSU_RX_TRIG_INT (1 << 1)
62 #define LPC32XX_HSU_TX_INT (1 << 0)
63
64 #define LPC32XX_HSU_HRTS_INV (1 << 21)
65 #define LPC32XX_HSU_HRTS_TRIG_8B (0x0 << 19)
66 #define LPC32XX_HSU_HRTS_TRIG_16B (0x1 << 19)
67 #define LPC32XX_HSU_HRTS_TRIG_32B (0x2 << 19)
68 #define LPC32XX_HSU_HRTS_TRIG_48B (0x3 << 19)
69 #define LPC32XX_HSU_HRTS_EN (1 << 18)
70 #define LPC32XX_HSU_TMO_DISABLED (0x0 << 16)
71 #define LPC32XX_HSU_TMO_INACT_4B (0x1 << 16)
72 #define LPC32XX_HSU_TMO_INACT_8B (0x2 << 16)
73 #define LPC32XX_HSU_TMO_INACT_16B (0x3 << 16)
74 #define LPC32XX_HSU_HCTS_INV (1 << 15)
75 #define LPC32XX_HSU_HCTS_EN (1 << 14)
76 #define LPC32XX_HSU_OFFSET(n) ((n) << 9)
77 #define LPC32XX_HSU_BREAK (1 << 8)
78 #define LPC32XX_HSU_ERR_INT_EN (1 << 7)
79 #define LPC32XX_HSU_RX_INT_EN (1 << 6)
80 #define LPC32XX_HSU_TX_INT_EN (1 << 5)
81 #define LPC32XX_HSU_RX_TL1B (0x0 << 2)
82 #define LPC32XX_HSU_RX_TL4B (0x1 << 2)
83 #define LPC32XX_HSU_RX_TL8B (0x2 << 2)
84 #define LPC32XX_HSU_RX_TL16B (0x3 << 2)
85 #define LPC32XX_HSU_RX_TL32B (0x4 << 2)
86 #define LPC32XX_HSU_RX_TL48B (0x5 << 2)
87 #define LPC32XX_HSU_TX_TLEMPTY (0x0 << 0)
88 #define LPC32XX_HSU_TX_TL0B (0x0 << 0)
89 #define LPC32XX_HSU_TX_TL4B (0x1 << 0)
90 #define LPC32XX_HSU_TX_TL8B (0x2 << 0)
91 #define LPC32XX_HSU_TX_TL16B (0x3 << 0)
92
93 #define MODNAME "lpc32xx_hsuart"
94
95 struct lpc32xx_hsuart_port {
96 struct uart_port port;
97 };
98
99 #define FIFO_READ_LIMIT 128
100 #define MAX_PORTS 3
101 #define LPC32XX_TTY_NAME "ttyTX"
102 static struct lpc32xx_hsuart_port lpc32xx_hs_ports[MAX_PORTS];
103
104 #ifdef CONFIG_SERIAL_HS_LPC32XX_CONSOLE
105 static void wait_for_xmit_empty(struct uart_port *port)
106 {
107 unsigned int timeout = 10000;
108
109 do {
110 if (LPC32XX_HSU_TX_LEV(readl(LPC32XX_HSUART_LEVEL(
111 port->membase))) == 0)
112 break;
113 if (--timeout == 0)
114 break;
115 udelay(1);
116 } while (1);
117 }
118
119 static void wait_for_xmit_ready(struct uart_port *port)
120 {
121 unsigned int timeout = 10000;
122
123 while (1) {
124 if (LPC32XX_HSU_TX_LEV(readl(LPC32XX_HSUART_LEVEL(
125 port->membase))) < 32)
126 break;
127 if (--timeout == 0)
128 break;
129 udelay(1);
130 }
131 }
132
133 static void lpc32xx_hsuart_console_putchar(struct uart_port *port, int ch)
134 {
135 wait_for_xmit_ready(port);
136 writel((u32)ch, LPC32XX_HSUART_FIFO(port->membase));
137 }
138
139 static void lpc32xx_hsuart_console_write(struct console *co, const char *s,
140 unsigned int count)
141 {
142 struct lpc32xx_hsuart_port *up = &lpc32xx_hs_ports[co->index];
143 unsigned long flags;
144 int locked = 1;
145
146 touch_nmi_watchdog();
147 local_irq_save(flags);
148 if (up->port.sysrq)
149 locked = 0;
150 else if (oops_in_progress)
151 locked = spin_trylock(&up->port.lock);
152 else
153 spin_lock(&up->port.lock);
154
155 uart_console_write(&up->port, s, count, lpc32xx_hsuart_console_putchar);
156 wait_for_xmit_empty(&up->port);
157
158 if (locked)
159 spin_unlock(&up->port.lock);
160 local_irq_restore(flags);
161 }
162
163 static int __init lpc32xx_hsuart_console_setup(struct console *co,
164 char *options)
165 {
166 struct uart_port *port;
167 int baud = 115200;
168 int bits = 8;
169 int parity = 'n';
170 int flow = 'n';
171
172 if (co->index >= MAX_PORTS)
173 co->index = 0;
174
175 port = &lpc32xx_hs_ports[co->index].port;
176 if (!port->membase)
177 return -ENODEV;
178
179 if (options)
180 uart_parse_options(options, &baud, &parity, &bits, &flow);
181
182 return uart_set_options(port, co, baud, parity, bits, flow);
183 }
184
185 static struct uart_driver lpc32xx_hsuart_reg;
186 static struct console lpc32xx_hsuart_console = {
187 .name = LPC32XX_TTY_NAME,
188 .write = lpc32xx_hsuart_console_write,
189 .device = uart_console_device,
190 .setup = lpc32xx_hsuart_console_setup,
191 .flags = CON_PRINTBUFFER,
192 .index = -1,
193 .data = &lpc32xx_hsuart_reg,
194 };
195
196 static int __init lpc32xx_hsuart_console_init(void)
197 {
198 register_console(&lpc32xx_hsuart_console);
199 return 0;
200 }
201 console_initcall(lpc32xx_hsuart_console_init);
202
203 #define LPC32XX_HSUART_CONSOLE (&lpc32xx_hsuart_console)
204 #else
205 #define LPC32XX_HSUART_CONSOLE NULL
206 #endif
207
208 static struct uart_driver lpc32xx_hs_reg = {
209 .owner = THIS_MODULE,
210 .driver_name = MODNAME,
211 .dev_name = LPC32XX_TTY_NAME,
212 .nr = MAX_PORTS,
213 .cons = LPC32XX_HSUART_CONSOLE,
214 };
215 static int uarts_registered;
216
217 static unsigned int __serial_get_clock_div(unsigned long uartclk,
218 unsigned long rate)
219 {
220 u32 div, goodrate, hsu_rate, l_hsu_rate, comprate;
221 u32 rate_diff;
222
223 /* Find the closest divider to get the desired clock rate */
224 div = uartclk / rate;
225 goodrate = hsu_rate = (div / 14) - 1;
226 if (hsu_rate != 0)
227 hsu_rate--;
228
229 /* Tweak divider */
230 l_hsu_rate = hsu_rate + 3;
231 rate_diff = 0xFFFFFFFF;
232
233 while (hsu_rate < l_hsu_rate) {
234 comprate = uartclk / ((hsu_rate + 1) * 14);
235 if (abs(comprate - rate) < rate_diff) {
236 goodrate = hsu_rate;
237 rate_diff = abs(comprate - rate);
238 }
239
240 hsu_rate++;
241 }
242 if (hsu_rate > 0xFF)
243 hsu_rate = 0xFF;
244
245 return goodrate;
246 }
247
248 static void __serial_uart_flush(struct uart_port *port)
249 {
250 u32 tmp;
251 int cnt = 0;
252
253 while ((readl(LPC32XX_HSUART_LEVEL(port->membase)) > 0) &&
254 (cnt++ < FIFO_READ_LIMIT))
255 tmp = readl(LPC32XX_HSUART_FIFO(port->membase));
256 }
257
258 static void __serial_lpc32xx_rx(struct uart_port *port)
259 {
260 struct tty_port *tport = &port->state->port;
261 unsigned int tmp, flag;
262
263 /* Read data from FIFO and push into terminal */
264 tmp = readl(LPC32XX_HSUART_FIFO(port->membase));
265 while (!(tmp & LPC32XX_HSU_RX_EMPTY)) {
266 flag = TTY_NORMAL;
267 port->icount.rx++;
268
269 if (tmp & LPC32XX_HSU_ERROR_DATA) {
270 /* Framing error */
271 writel(LPC32XX_HSU_FE_INT,
272 LPC32XX_HSUART_IIR(port->membase));
273 port->icount.frame++;
274 flag = TTY_FRAME;
275 tty_insert_flip_char(tport, 0, TTY_FRAME);
276 }
277
278 tty_insert_flip_char(tport, (tmp & 0xFF), flag);
279
280 tmp = readl(LPC32XX_HSUART_FIFO(port->membase));
281 }
282
283 spin_unlock(&port->lock);
284 tty_flip_buffer_push(tport);
285 spin_lock(&port->lock);
286 }
287
288 static void __serial_lpc32xx_tx(struct uart_port *port)
289 {
290 struct circ_buf *xmit = &port->state->xmit;
291 unsigned int tmp;
292
293 if (port->x_char) {
294 writel((u32)port->x_char, LPC32XX_HSUART_FIFO(port->membase));
295 port->icount.tx++;
296 port->x_char = 0;
297 return;
298 }
299
300 if (uart_circ_empty(xmit) || uart_tx_stopped(port))
301 goto exit_tx;
302
303 /* Transfer data */
304 while (LPC32XX_HSU_TX_LEV(readl(
305 LPC32XX_HSUART_LEVEL(port->membase))) < 64) {
306 writel((u32) xmit->buf[xmit->tail],
307 LPC32XX_HSUART_FIFO(port->membase));
308 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
309 port->icount.tx++;
310 if (uart_circ_empty(xmit))
311 break;
312 }
313
314 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
315 uart_write_wakeup(port);
316
317 exit_tx:
318 if (uart_circ_empty(xmit)) {
319 tmp = readl(LPC32XX_HSUART_CTRL(port->membase));
320 tmp &= ~LPC32XX_HSU_TX_INT_EN;
321 writel(tmp, LPC32XX_HSUART_CTRL(port->membase));
322 }
323 }
324
325 static irqreturn_t serial_lpc32xx_interrupt(int irq, void *dev_id)
326 {
327 struct uart_port *port = dev_id;
328 struct tty_port *tport = &port->state->port;
329 u32 status;
330
331 spin_lock(&port->lock);
332
333 /* Read UART status and clear latched interrupts */
334 status = readl(LPC32XX_HSUART_IIR(port->membase));
335
336 if (status & LPC32XX_HSU_BRK_INT) {
337 /* Break received */
338 writel(LPC32XX_HSU_BRK_INT, LPC32XX_HSUART_IIR(port->membase));
339 port->icount.brk++;
340 uart_handle_break(port);
341 }
342
343 /* Framing error */
344 if (status & LPC32XX_HSU_FE_INT)
345 writel(LPC32XX_HSU_FE_INT, LPC32XX_HSUART_IIR(port->membase));
346
347 if (status & LPC32XX_HSU_RX_OE_INT) {
348 /* Receive FIFO overrun */
349 writel(LPC32XX_HSU_RX_OE_INT,
350 LPC32XX_HSUART_IIR(port->membase));
351 port->icount.overrun++;
352 tty_insert_flip_char(tport, 0, TTY_OVERRUN);
353 tty_schedule_flip(tport);
354 }
355
356 /* Data received? */
357 if (status & (LPC32XX_HSU_RX_TIMEOUT_INT | LPC32XX_HSU_RX_TRIG_INT))
358 __serial_lpc32xx_rx(port);
359
360 /* Transmit data request? */
361 if ((status & LPC32XX_HSU_TX_INT) && (!uart_tx_stopped(port))) {
362 writel(LPC32XX_HSU_TX_INT, LPC32XX_HSUART_IIR(port->membase));
363 __serial_lpc32xx_tx(port);
364 }
365
366 spin_unlock(&port->lock);
367
368 return IRQ_HANDLED;
369 }
370
371 /* port->lock is not held. */
372 static unsigned int serial_lpc32xx_tx_empty(struct uart_port *port)
373 {
374 unsigned int ret = 0;
375
376 if (LPC32XX_HSU_TX_LEV(readl(LPC32XX_HSUART_LEVEL(port->membase))) == 0)
377 ret = TIOCSER_TEMT;
378
379 return ret;
380 }
381
382 /* port->lock held by caller. */
383 static void serial_lpc32xx_set_mctrl(struct uart_port *port,
384 unsigned int mctrl)
385 {
386 /* No signals are supported on HS UARTs */
387 }
388
389 /* port->lock is held by caller and interrupts are disabled. */
390 static unsigned int serial_lpc32xx_get_mctrl(struct uart_port *port)
391 {
392 /* No signals are supported on HS UARTs */
393 return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
394 }
395
396 /* port->lock held by caller. */
397 static void serial_lpc32xx_stop_tx(struct uart_port *port)
398 {
399 u32 tmp;
400
401 tmp = readl(LPC32XX_HSUART_CTRL(port->membase));
402 tmp &= ~LPC32XX_HSU_TX_INT_EN;
403 writel(tmp, LPC32XX_HSUART_CTRL(port->membase));
404 }
405
406 /* port->lock held by caller. */
407 static void serial_lpc32xx_start_tx(struct uart_port *port)
408 {
409 u32 tmp;
410
411 __serial_lpc32xx_tx(port);
412 tmp = readl(LPC32XX_HSUART_CTRL(port->membase));
413 tmp |= LPC32XX_HSU_TX_INT_EN;
414 writel(tmp, LPC32XX_HSUART_CTRL(port->membase));
415 }
416
417 /* port->lock held by caller. */
418 static void serial_lpc32xx_stop_rx(struct uart_port *port)
419 {
420 u32 tmp;
421
422 tmp = readl(LPC32XX_HSUART_CTRL(port->membase));
423 tmp &= ~(LPC32XX_HSU_RX_INT_EN | LPC32XX_HSU_ERR_INT_EN);
424 writel(tmp, LPC32XX_HSUART_CTRL(port->membase));
425
426 writel((LPC32XX_HSU_BRK_INT | LPC32XX_HSU_RX_OE_INT |
427 LPC32XX_HSU_FE_INT), LPC32XX_HSUART_IIR(port->membase));
428 }
429
430 /* port->lock held by caller. */
431 static void serial_lpc32xx_enable_ms(struct uart_port *port)
432 {
433 /* Modem status is not supported */
434 }
435
436 /* port->lock is not held. */
437 static void serial_lpc32xx_break_ctl(struct uart_port *port,
438 int break_state)
439 {
440 unsigned long flags;
441 u32 tmp;
442
443 spin_lock_irqsave(&port->lock, flags);
444 tmp = readl(LPC32XX_HSUART_CTRL(port->membase));
445 if (break_state != 0)
446 tmp |= LPC32XX_HSU_BREAK;
447 else
448 tmp &= ~LPC32XX_HSU_BREAK;
449 writel(tmp, LPC32XX_HSUART_CTRL(port->membase));
450 spin_unlock_irqrestore(&port->lock, flags);
451 }
452
453 /* LPC3250 Errata HSUART.1: Hang workaround via loopback mode on inactivity */
454 static void lpc32xx_loopback_set(resource_size_t mapbase, int state)
455 {
456 int bit;
457 u32 tmp;
458
459 switch (mapbase) {
460 case LPC32XX_HS_UART1_BASE:
461 bit = 0;
462 break;
463 case LPC32XX_HS_UART2_BASE:
464 bit = 1;
465 break;
466 case LPC32XX_HS_UART7_BASE:
467 bit = 6;
468 break;
469 default:
470 WARN(1, "lpc32xx_hs: Warning: Unknown port at %08x\n", mapbase);
471 return;
472 }
473
474 tmp = readl(LPC32XX_UARTCTL_CLOOP);
475 if (state)
476 tmp |= (1 << bit);
477 else
478 tmp &= ~(1 << bit);
479 writel(tmp, LPC32XX_UARTCTL_CLOOP);
480 }
481
482 /* port->lock is not held. */
483 static int serial_lpc32xx_startup(struct uart_port *port)
484 {
485 int retval;
486 unsigned long flags;
487 u32 tmp;
488
489 spin_lock_irqsave(&port->lock, flags);
490
491 __serial_uart_flush(port);
492
493 writel((LPC32XX_HSU_TX_INT | LPC32XX_HSU_FE_INT |
494 LPC32XX_HSU_BRK_INT | LPC32XX_HSU_RX_OE_INT),
495 LPC32XX_HSUART_IIR(port->membase));
496
497 writel(0xFF, LPC32XX_HSUART_RATE(port->membase));
498
499 /*
500 * Set receiver timeout, HSU offset of 20, no break, no interrupts,
501 * and default FIFO trigger levels
502 */
503 tmp = LPC32XX_HSU_TX_TL8B | LPC32XX_HSU_RX_TL32B |
504 LPC32XX_HSU_OFFSET(20) | LPC32XX_HSU_TMO_INACT_4B;
505 writel(tmp, LPC32XX_HSUART_CTRL(port->membase));
506
507 lpc32xx_loopback_set(port->mapbase, 0); /* get out of loopback mode */
508
509 spin_unlock_irqrestore(&port->lock, flags);
510
511 retval = request_irq(port->irq, serial_lpc32xx_interrupt,
512 0, MODNAME, port);
513 if (!retval)
514 writel((tmp | LPC32XX_HSU_RX_INT_EN | LPC32XX_HSU_ERR_INT_EN),
515 LPC32XX_HSUART_CTRL(port->membase));
516
517 return retval;
518 }
519
520 /* port->lock is not held. */
521 static void serial_lpc32xx_shutdown(struct uart_port *port)
522 {
523 u32 tmp;
524 unsigned long flags;
525
526 spin_lock_irqsave(&port->lock, flags);
527
528 tmp = LPC32XX_HSU_TX_TL8B | LPC32XX_HSU_RX_TL32B |
529 LPC32XX_HSU_OFFSET(20) | LPC32XX_HSU_TMO_INACT_4B;
530 writel(tmp, LPC32XX_HSUART_CTRL(port->membase));
531
532 lpc32xx_loopback_set(port->mapbase, 1); /* go to loopback mode */
533
534 spin_unlock_irqrestore(&port->lock, flags);
535
536 free_irq(port->irq, port);
537 }
538
539 /* port->lock is not held. */
540 static void serial_lpc32xx_set_termios(struct uart_port *port,
541 struct ktermios *termios,
542 struct ktermios *old)
543 {
544 unsigned long flags;
545 unsigned int baud, quot;
546 u32 tmp;
547
548 /* Always 8-bit, no parity, 1 stop bit */
549 termios->c_cflag &= ~(CSIZE | CSTOPB | PARENB | PARODD);
550 termios->c_cflag |= CS8;
551
552 termios->c_cflag &= ~(HUPCL | CMSPAR | CLOCAL | CRTSCTS);
553
554 baud = uart_get_baud_rate(port, termios, old, 0,
555 port->uartclk / 14);
556
557 quot = __serial_get_clock_div(port->uartclk, baud);
558
559 spin_lock_irqsave(&port->lock, flags);
560
561 /* Ignore characters? */
562 tmp = readl(LPC32XX_HSUART_CTRL(port->membase));
563 if ((termios->c_cflag & CREAD) == 0)
564 tmp &= ~(LPC32XX_HSU_RX_INT_EN | LPC32XX_HSU_ERR_INT_EN);
565 else
566 tmp |= LPC32XX_HSU_RX_INT_EN | LPC32XX_HSU_ERR_INT_EN;
567 writel(tmp, LPC32XX_HSUART_CTRL(port->membase));
568
569 writel(quot, LPC32XX_HSUART_RATE(port->membase));
570
571 uart_update_timeout(port, termios->c_cflag, baud);
572
573 spin_unlock_irqrestore(&port->lock, flags);
574
575 /* Don't rewrite B0 */
576 if (tty_termios_baud_rate(termios))
577 tty_termios_encode_baud_rate(termios, baud, baud);
578 }
579
580 static const char *serial_lpc32xx_type(struct uart_port *port)
581 {
582 return MODNAME;
583 }
584
585 static void serial_lpc32xx_release_port(struct uart_port *port)
586 {
587 if ((port->iotype == UPIO_MEM32) && (port->mapbase)) {
588 if (port->flags & UPF_IOREMAP) {
589 iounmap(port->membase);
590 port->membase = NULL;
591 }
592
593 release_mem_region(port->mapbase, SZ_4K);
594 }
595 }
596
597 static int serial_lpc32xx_request_port(struct uart_port *port)
598 {
599 int ret = -ENODEV;
600
601 if ((port->iotype == UPIO_MEM32) && (port->mapbase)) {
602 ret = 0;
603
604 if (!request_mem_region(port->mapbase, SZ_4K, MODNAME))
605 ret = -EBUSY;
606 else if (port->flags & UPF_IOREMAP) {
607 port->membase = ioremap(port->mapbase, SZ_4K);
608 if (!port->membase) {
609 release_mem_region(port->mapbase, SZ_4K);
610 ret = -ENOMEM;
611 }
612 }
613 }
614
615 return ret;
616 }
617
618 static void serial_lpc32xx_config_port(struct uart_port *port, int uflags)
619 {
620 int ret;
621
622 ret = serial_lpc32xx_request_port(port);
623 if (ret < 0)
624 return;
625 port->type = PORT_UART00;
626 port->fifosize = 64;
627
628 __serial_uart_flush(port);
629
630 writel((LPC32XX_HSU_TX_INT | LPC32XX_HSU_FE_INT |
631 LPC32XX_HSU_BRK_INT | LPC32XX_HSU_RX_OE_INT),
632 LPC32XX_HSUART_IIR(port->membase));
633
634 writel(0xFF, LPC32XX_HSUART_RATE(port->membase));
635
636 /* Set receiver timeout, HSU offset of 20, no break, no interrupts,
637 and default FIFO trigger levels */
638 writel(LPC32XX_HSU_TX_TL8B | LPC32XX_HSU_RX_TL32B |
639 LPC32XX_HSU_OFFSET(20) | LPC32XX_HSU_TMO_INACT_4B,
640 LPC32XX_HSUART_CTRL(port->membase));
641 }
642
643 static int serial_lpc32xx_verify_port(struct uart_port *port,
644 struct serial_struct *ser)
645 {
646 int ret = 0;
647
648 if (ser->type != PORT_UART00)
649 ret = -EINVAL;
650
651 return ret;
652 }
653
654 static struct uart_ops serial_lpc32xx_pops = {
655 .tx_empty = serial_lpc32xx_tx_empty,
656 .set_mctrl = serial_lpc32xx_set_mctrl,
657 .get_mctrl = serial_lpc32xx_get_mctrl,
658 .stop_tx = serial_lpc32xx_stop_tx,
659 .start_tx = serial_lpc32xx_start_tx,
660 .stop_rx = serial_lpc32xx_stop_rx,
661 .enable_ms = serial_lpc32xx_enable_ms,
662 .break_ctl = serial_lpc32xx_break_ctl,
663 .startup = serial_lpc32xx_startup,
664 .shutdown = serial_lpc32xx_shutdown,
665 .set_termios = serial_lpc32xx_set_termios,
666 .type = serial_lpc32xx_type,
667 .release_port = serial_lpc32xx_release_port,
668 .request_port = serial_lpc32xx_request_port,
669 .config_port = serial_lpc32xx_config_port,
670 .verify_port = serial_lpc32xx_verify_port,
671 };
672
673 /*
674 * Register a set of serial devices attached to a platform device
675 */
676 static int serial_hs_lpc32xx_probe(struct platform_device *pdev)
677 {
678 struct lpc32xx_hsuart_port *p = &lpc32xx_hs_ports[uarts_registered];
679 int ret = 0;
680 struct resource *res;
681
682 if (uarts_registered >= MAX_PORTS) {
683 dev_err(&pdev->dev,
684 "Error: Number of possible ports exceeded (%d)!\n",
685 uarts_registered + 1);
686 return -ENXIO;
687 }
688
689 memset(p, 0, sizeof(*p));
690
691 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
692 if (!res) {
693 dev_err(&pdev->dev,
694 "Error getting mem resource for HS UART port %d\n",
695 uarts_registered);
696 return -ENXIO;
697 }
698 p->port.mapbase = res->start;
699 p->port.membase = NULL;
700
701 p->port.irq = platform_get_irq(pdev, 0);
702 if (p->port.irq < 0) {
703 dev_err(&pdev->dev, "Error getting irq for HS UART port %d\n",
704 uarts_registered);
705 return p->port.irq;
706 }
707
708 p->port.iotype = UPIO_MEM32;
709 p->port.uartclk = LPC32XX_MAIN_OSC_FREQ;
710 p->port.regshift = 2;
711 p->port.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_PORT | UPF_IOREMAP;
712 p->port.dev = &pdev->dev;
713 p->port.ops = &serial_lpc32xx_pops;
714 p->port.line = uarts_registered++;
715 spin_lock_init(&p->port.lock);
716
717 /* send port to loopback mode by default */
718 lpc32xx_loopback_set(p->port.mapbase, 1);
719
720 ret = uart_add_one_port(&lpc32xx_hs_reg, &p->port);
721
722 platform_set_drvdata(pdev, p);
723
724 return ret;
725 }
726
727 /*
728 * Remove serial ports registered against a platform device.
729 */
730 static int serial_hs_lpc32xx_remove(struct platform_device *pdev)
731 {
732 struct lpc32xx_hsuart_port *p = platform_get_drvdata(pdev);
733
734 uart_remove_one_port(&lpc32xx_hs_reg, &p->port);
735
736 return 0;
737 }
738
739
740 #ifdef CONFIG_PM
741 static int serial_hs_lpc32xx_suspend(struct platform_device *pdev,
742 pm_message_t state)
743 {
744 struct lpc32xx_hsuart_port *p = platform_get_drvdata(pdev);
745
746 uart_suspend_port(&lpc32xx_hs_reg, &p->port);
747
748 return 0;
749 }
750
751 static int serial_hs_lpc32xx_resume(struct platform_device *pdev)
752 {
753 struct lpc32xx_hsuart_port *p = platform_get_drvdata(pdev);
754
755 uart_resume_port(&lpc32xx_hs_reg, &p->port);
756
757 return 0;
758 }
759 #else
760 #define serial_hs_lpc32xx_suspend NULL
761 #define serial_hs_lpc32xx_resume NULL
762 #endif
763
764 static const struct of_device_id serial_hs_lpc32xx_dt_ids[] = {
765 { .compatible = "nxp,lpc3220-hsuart" },
766 { /* sentinel */ }
767 };
768
769 MODULE_DEVICE_TABLE(of, serial_hs_lpc32xx_dt_ids);
770
771 static struct platform_driver serial_hs_lpc32xx_driver = {
772 .probe = serial_hs_lpc32xx_probe,
773 .remove = serial_hs_lpc32xx_remove,
774 .suspend = serial_hs_lpc32xx_suspend,
775 .resume = serial_hs_lpc32xx_resume,
776 .driver = {
777 .name = MODNAME,
778 .owner = THIS_MODULE,
779 .of_match_table = serial_hs_lpc32xx_dt_ids,
780 },
781 };
782
783 static int __init lpc32xx_hsuart_init(void)
784 {
785 int ret;
786
787 ret = uart_register_driver(&lpc32xx_hs_reg);
788 if (ret)
789 return ret;
790
791 ret = platform_driver_register(&serial_hs_lpc32xx_driver);
792 if (ret)
793 uart_unregister_driver(&lpc32xx_hs_reg);
794
795 return ret;
796 }
797
798 static void __exit lpc32xx_hsuart_exit(void)
799 {
800 platform_driver_unregister(&serial_hs_lpc32xx_driver);
801 uart_unregister_driver(&lpc32xx_hs_reg);
802 }
803
804 module_init(lpc32xx_hsuart_init);
805 module_exit(lpc32xx_hsuart_exit);
806
807 MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com>");
808 MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>");
809 MODULE_DESCRIPTION("NXP LPC32XX High Speed UART driver");
810 MODULE_LICENSE("GPL");
Linux with added FPC-III support