staging: comedi: addi_apci_1032: check INSN_CONFIG_DIGITAL_TRIG shift
[linux/fpc-iii.git] / include / xen / interface / memory.h
blob447004861f008d5a0360dffbd94aa96bc4a8e135
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /******************************************************************************
3 * memory.h
5 * Memory reservation and information.
7 * Copyright (c) 2005, Keir Fraser <keir@xensource.com>
8 */
10 #ifndef __XEN_PUBLIC_MEMORY_H__
11 #define __XEN_PUBLIC_MEMORY_H__
13 #include <linux/spinlock.h>
16 * Increase or decrease the specified domain's memory reservation. Returns a
17 * -ve errcode on failure, or the # extents successfully allocated or freed.
18 * arg == addr of struct xen_memory_reservation.
20 #define XENMEM_increase_reservation 0
21 #define XENMEM_decrease_reservation 1
22 #define XENMEM_populate_physmap 6
23 struct xen_memory_reservation {
26 * XENMEM_increase_reservation:
27 * OUT: MFN (*not* GMFN) bases of extents that were allocated
28 * XENMEM_decrease_reservation:
29 * IN: GMFN bases of extents to free
30 * XENMEM_populate_physmap:
31 * IN: GPFN bases of extents to populate with memory
32 * OUT: GMFN bases of extents that were allocated
33 * (NB. This command also updates the mach_to_phys translation table)
35 GUEST_HANDLE(xen_pfn_t) extent_start;
37 /* Number of extents, and size/alignment of each (2^extent_order pages). */
38 xen_ulong_t nr_extents;
39 unsigned int extent_order;
42 * Maximum # bits addressable by the user of the allocated region (e.g.,
43 * I/O devices often have a 32-bit limitation even in 64-bit systems). If
44 * zero then the user has no addressing restriction.
45 * This field is not used by XENMEM_decrease_reservation.
47 unsigned int address_bits;
50 * Domain whose reservation is being changed.
51 * Unprivileged domains can specify only DOMID_SELF.
53 domid_t domid;
56 DEFINE_GUEST_HANDLE_STRUCT(xen_memory_reservation);
59 * An atomic exchange of memory pages. If return code is zero then
60 * @out.extent_list provides GMFNs of the newly-allocated memory.
61 * Returns zero on complete success, otherwise a negative error code.
62 * On complete success then always @nr_exchanged == @in.nr_extents.
63 * On partial success @nr_exchanged indicates how much work was done.
65 #define XENMEM_exchange 11
66 struct xen_memory_exchange {
68 * [IN] Details of memory extents to be exchanged (GMFN bases).
69 * Note that @in.address_bits is ignored and unused.
71 struct xen_memory_reservation in;
74 * [IN/OUT] Details of new memory extents.
75 * We require that:
76 * 1. @in.domid == @out.domid
77 * 2. @in.nr_extents << @in.extent_order ==
78 * @out.nr_extents << @out.extent_order
79 * 3. @in.extent_start and @out.extent_start lists must not overlap
80 * 4. @out.extent_start lists GPFN bases to be populated
81 * 5. @out.extent_start is overwritten with allocated GMFN bases
83 struct xen_memory_reservation out;
86 * [OUT] Number of input extents that were successfully exchanged:
87 * 1. The first @nr_exchanged input extents were successfully
88 * deallocated.
89 * 2. The corresponding first entries in the output extent list correctly
90 * indicate the GMFNs that were successfully exchanged.
91 * 3. All other input and output extents are untouched.
92 * 4. If not all input exents are exchanged then the return code of this
93 * command will be non-zero.
94 * 5. THIS FIELD MUST BE INITIALISED TO ZERO BY THE CALLER!
96 xen_ulong_t nr_exchanged;
99 DEFINE_GUEST_HANDLE_STRUCT(xen_memory_exchange);
101 * Returns the maximum machine frame number of mapped RAM in this system.
102 * This command always succeeds (it never returns an error code).
103 * arg == NULL.
105 #define XENMEM_maximum_ram_page 2
108 * Returns the current or maximum memory reservation, in pages, of the
109 * specified domain (may be DOMID_SELF). Returns -ve errcode on failure.
110 * arg == addr of domid_t.
112 #define XENMEM_current_reservation 3
113 #define XENMEM_maximum_reservation 4
116 * Returns a list of MFN bases of 2MB extents comprising the machine_to_phys
117 * mapping table. Architectures which do not have a m2p table do not implement
118 * this command.
119 * arg == addr of xen_machphys_mfn_list_t.
121 #define XENMEM_machphys_mfn_list 5
122 struct xen_machphys_mfn_list {
124 * Size of the 'extent_start' array. Fewer entries will be filled if the
125 * machphys table is smaller than max_extents * 2MB.
127 unsigned int max_extents;
130 * Pointer to buffer to fill with list of extent starts. If there are
131 * any large discontiguities in the machine address space, 2MB gaps in
132 * the machphys table will be represented by an MFN base of zero.
134 GUEST_HANDLE(xen_pfn_t) extent_start;
137 * Number of extents written to the above array. This will be smaller
138 * than 'max_extents' if the machphys table is smaller than max_e * 2MB.
140 unsigned int nr_extents;
142 DEFINE_GUEST_HANDLE_STRUCT(xen_machphys_mfn_list);
145 * Returns the location in virtual address space of the machine_to_phys
146 * mapping table. Architectures which do not have a m2p table, or which do not
147 * map it by default into guest address space, do not implement this command.
148 * arg == addr of xen_machphys_mapping_t.
150 #define XENMEM_machphys_mapping 12
151 struct xen_machphys_mapping {
152 xen_ulong_t v_start, v_end; /* Start and end virtual addresses. */
153 xen_ulong_t max_mfn; /* Maximum MFN that can be looked up. */
155 DEFINE_GUEST_HANDLE_STRUCT(xen_machphys_mapping_t);
157 #define XENMAPSPACE_shared_info 0 /* shared info page */
158 #define XENMAPSPACE_grant_table 1 /* grant table page */
159 #define XENMAPSPACE_gmfn 2 /* GMFN */
160 #define XENMAPSPACE_gmfn_range 3 /* GMFN range, XENMEM_add_to_physmap only. */
161 #define XENMAPSPACE_gmfn_foreign 4 /* GMFN from another dom,
162 * XENMEM_add_to_physmap_range only.
164 #define XENMAPSPACE_dev_mmio 5 /* device mmio region */
167 * Sets the GPFN at which a particular page appears in the specified guest's
168 * pseudophysical address space.
169 * arg == addr of xen_add_to_physmap_t.
171 #define XENMEM_add_to_physmap 7
172 struct xen_add_to_physmap {
173 /* Which domain to change the mapping for. */
174 domid_t domid;
176 /* Number of pages to go through for gmfn_range */
177 uint16_t size;
179 /* Source mapping space. */
180 unsigned int space;
182 /* Index into source mapping space. */
183 xen_ulong_t idx;
185 /* GPFN where the source mapping page should appear. */
186 xen_pfn_t gpfn;
188 DEFINE_GUEST_HANDLE_STRUCT(xen_add_to_physmap);
190 /*** REMOVED ***/
191 /*#define XENMEM_translate_gpfn_list 8*/
193 #define XENMEM_add_to_physmap_range 23
194 struct xen_add_to_physmap_range {
195 /* IN */
196 /* Which domain to change the mapping for. */
197 domid_t domid;
198 uint16_t space; /* => enum phys_map_space */
200 /* Number of pages to go through */
201 uint16_t size;
202 domid_t foreign_domid; /* IFF gmfn_foreign */
204 /* Indexes into space being mapped. */
205 GUEST_HANDLE(xen_ulong_t) idxs;
207 /* GPFN in domid where the source mapping page should appear. */
208 GUEST_HANDLE(xen_pfn_t) gpfns;
210 /* OUT */
212 /* Per index error code. */
213 GUEST_HANDLE(int) errs;
215 DEFINE_GUEST_HANDLE_STRUCT(xen_add_to_physmap_range);
218 * Returns the pseudo-physical memory map as it was when the domain
219 * was started (specified by XENMEM_set_memory_map).
220 * arg == addr of struct xen_memory_map.
222 #define XENMEM_memory_map 9
223 struct xen_memory_map {
225 * On call the number of entries which can be stored in buffer. On
226 * return the number of entries which have been stored in
227 * buffer.
229 unsigned int nr_entries;
232 * Entries in the buffer are in the same format as returned by the
233 * BIOS INT 0x15 EAX=0xE820 call.
235 GUEST_HANDLE(void) buffer;
237 DEFINE_GUEST_HANDLE_STRUCT(xen_memory_map);
240 * Returns the real physical memory map. Passes the same structure as
241 * XENMEM_memory_map.
242 * arg == addr of struct xen_memory_map.
244 #define XENMEM_machine_memory_map 10
248 * Unmaps the page appearing at a particular GPFN from the specified guest's
249 * pseudophysical address space.
250 * arg == addr of xen_remove_from_physmap_t.
252 #define XENMEM_remove_from_physmap 15
253 struct xen_remove_from_physmap {
254 /* Which domain to change the mapping for. */
255 domid_t domid;
257 /* GPFN of the current mapping of the page. */
258 xen_pfn_t gpfn;
260 DEFINE_GUEST_HANDLE_STRUCT(xen_remove_from_physmap);
263 * Get the pages for a particular guest resource, so that they can be
264 * mapped directly by a tools domain.
266 #define XENMEM_acquire_resource 28
267 struct xen_mem_acquire_resource {
268 /* IN - The domain whose resource is to be mapped */
269 domid_t domid;
270 /* IN - the type of resource */
271 uint16_t type;
273 #define XENMEM_resource_ioreq_server 0
274 #define XENMEM_resource_grant_table 1
277 * IN - a type-specific resource identifier, which must be zero
278 * unless stated otherwise.
280 * type == XENMEM_resource_ioreq_server -> id == ioreq server id
281 * type == XENMEM_resource_grant_table -> id defined below
283 uint32_t id;
285 #define XENMEM_resource_grant_table_id_shared 0
286 #define XENMEM_resource_grant_table_id_status 1
288 /* IN/OUT - As an IN parameter number of frames of the resource
289 * to be mapped. However, if the specified value is 0 and
290 * frame_list is NULL then this field will be set to the
291 * maximum value supported by the implementation on return.
293 uint32_t nr_frames;
295 * OUT - Must be zero on entry. On return this may contain a bitwise
296 * OR of the following values.
298 uint32_t flags;
300 /* The resource pages have been assigned to the calling domain */
301 #define _XENMEM_rsrc_acq_caller_owned 0
302 #define XENMEM_rsrc_acq_caller_owned (1u << _XENMEM_rsrc_acq_caller_owned)
305 * IN - the index of the initial frame to be mapped. This parameter
306 * is ignored if nr_frames is 0.
308 uint64_t frame;
310 #define XENMEM_resource_ioreq_server_frame_bufioreq 0
311 #define XENMEM_resource_ioreq_server_frame_ioreq(n) (1 + (n))
314 * IN/OUT - If the tools domain is PV then, upon return, frame_list
315 * will be populated with the MFNs of the resource.
316 * If the tools domain is HVM then it is expected that, on
317 * entry, frame_list will be populated with a list of GFNs
318 * that will be mapped to the MFNs of the resource.
319 * If -EIO is returned then the frame_list has only been
320 * partially mapped and it is up to the caller to unmap all
321 * the GFNs.
322 * This parameter may be NULL if nr_frames is 0.
324 GUEST_HANDLE(xen_pfn_t) frame_list;
326 DEFINE_GUEST_HANDLE_STRUCT(xen_mem_acquire_resource);
328 #endif /* __XEN_PUBLIC_MEMORY_H__ */