[PATCH] USB: Rename hcd->hub_suspend to hcd->bus_suspend
[linux/fpc-iii.git] / drivers / net / phy / marvell.c
blob4a72b025006b0c56d0f5e7ee3fec3c2d96f4cef6
1 /*
2 * drivers/net/phy/marvell.c
4 * Driver for Marvell PHYs
6 * Author: Andy Fleming
8 * Copyright (c) 2004 Freescale Semiconductor, Inc.
10 * This program is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License as published by the
12 * Free Software Foundation; either version 2 of the License, or (at your
13 * option) any later version.
16 #include <linux/config.h>
17 #include <linux/kernel.h>
18 #include <linux/sched.h>
19 #include <linux/string.h>
20 #include <linux/errno.h>
21 #include <linux/unistd.h>
22 #include <linux/slab.h>
23 #include <linux/interrupt.h>
24 #include <linux/init.h>
25 #include <linux/delay.h>
26 #include <linux/netdevice.h>
27 #include <linux/etherdevice.h>
28 #include <linux/skbuff.h>
29 #include <linux/spinlock.h>
30 #include <linux/mm.h>
31 #include <linux/module.h>
32 #include <linux/version.h>
33 #include <linux/mii.h>
34 #include <linux/ethtool.h>
35 #include <linux/phy.h>
37 #include <asm/io.h>
38 #include <asm/irq.h>
39 #include <asm/uaccess.h>
41 #define MII_M1011_IEVENT 0x13
42 #define MII_M1011_IEVENT_CLEAR 0x0000
44 #define MII_M1011_IMASK 0x12
45 #define MII_M1011_IMASK_INIT 0x6400
46 #define MII_M1011_IMASK_CLEAR 0x0000
48 MODULE_DESCRIPTION("Marvell PHY driver");
49 MODULE_AUTHOR("Andy Fleming");
50 MODULE_LICENSE("GPL");
52 static int marvell_ack_interrupt(struct phy_device *phydev)
54 int err;
56 /* Clear the interrupts by reading the reg */
57 err = phy_read(phydev, MII_M1011_IEVENT);
59 if (err < 0)
60 return err;
62 return 0;
65 static int marvell_config_intr(struct phy_device *phydev)
67 int err;
69 if(phydev->interrupts == PHY_INTERRUPT_ENABLED)
70 err = phy_write(phydev, MII_M1011_IMASK, MII_M1011_IMASK_INIT);
71 else
72 err = phy_write(phydev, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR);
74 return err;
77 static int marvell_config_aneg(struct phy_device *phydev)
79 int err;
81 /* The Marvell PHY has an errata which requires
82 * that certain registers get written in order
83 * to restart autonegotiation */
84 err = phy_write(phydev, MII_BMCR, BMCR_RESET);
86 if (err < 0)
87 return err;
89 err = phy_write(phydev, 0x1d, 0x1f);
90 if (err < 0)
91 return err;
93 err = phy_write(phydev, 0x1e, 0x200c);
94 if (err < 0)
95 return err;
97 err = phy_write(phydev, 0x1d, 0x5);
98 if (err < 0)
99 return err;
101 err = phy_write(phydev, 0x1e, 0);
102 if (err < 0)
103 return err;
105 err = phy_write(phydev, 0x1e, 0x100);
106 if (err < 0)
107 return err;
110 err = genphy_config_aneg(phydev);
112 return err;
116 static struct phy_driver m88e1101_driver = {
117 .phy_id = 0x01410c00,
118 .phy_id_mask = 0xffffff00,
119 .name = "Marvell 88E1101",
120 .features = PHY_GBIT_FEATURES,
121 .flags = PHY_HAS_INTERRUPT,
122 .config_aneg = &marvell_config_aneg,
123 .read_status = &genphy_read_status,
124 .ack_interrupt = &marvell_ack_interrupt,
125 .config_intr = &marvell_config_intr,
126 .driver = { .owner = THIS_MODULE,},
129 static int __init marvell_init(void)
131 return phy_driver_register(&m88e1101_driver);
134 static void __exit marvell_exit(void)
136 phy_driver_unregister(&m88e1101_driver);
139 module_init(marvell_init);
140 module_exit(marvell_exit);