[PATCH] USB: Rename hcd->hub_suspend to hcd->bus_suspend

[linux/fpc-iii.git] / drivers / pcmcia / au1000_generic.c

/*
 *
 * Alchemy Semi Au1000 pcmcia driver
 *
 * Copyright 2001-2003 MontaVista Software Inc.
 * Author: MontaVista Software, Inc.
 *              ppopov@embeddedalley.com or source@mvista.com
 *
 * Copyright 2004 Pete Popov, Embedded Alley Solutions, Inc.
 * Updated the driver to 2.6. Followed the sa11xx API and largely
 * copied many of the hardware independent functions.
 *
 * ########################################################################
 *
 *  This program is free software; you can distribute it and/or modify it
 *  under the terms of the GNU General Public License (Version 2) as
 *  published by the Free Software Foundation.
 *
 *  This program is distributed in the hope it will be useful, but WITHOUT
 *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 *  for more details.
 *
 *  You should have received a copy of the GNU General Public License along
 *  with this program; if not, write to the Free Software Foundation, Inc.,
 *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
 *
 * ########################################################################
 *
 * 
 */

#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/config.h>
#include <linux/cpufreq.h>
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/timer.h>
#include <linux/mm.h>
#include <linux/notifier.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/device.h>

#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>

#include <asm/mach-au1x00/au1000.h>
#include "au1000_generic.h"

MODULE_LICENSE("GPL");
MODULE_AUTHOR("Pete Popov <ppopov@embeddedalley.com>");
MODULE_DESCRIPTION("Linux PCMCIA Card Services: Au1x00 Socket Controller");

#if 0
#define debug(x,args...) printk(KERN_DEBUG "%s: " x, __func__ , ##args)
#else
#define debug(x,args...)
#endif

#define MAP_SIZE 0x100000
extern struct au1000_pcmcia_socket au1000_pcmcia_socket[];
#define PCMCIA_SOCKET(x)        (au1000_pcmcia_socket + (x))
#define to_au1000_socket(x)     container_of(x, struct au1000_pcmcia_socket, socket)

/* Some boards like to support CF cards as IDE root devices, so they
 * grab pcmcia sockets directly.
 */
u32 *pcmcia_base_vaddrs[2];
extern const unsigned long mips_io_port_base;

DECLARE_MUTEX(pcmcia_sockets_lock);

static int (*au1x00_pcmcia_hw_init[])(struct device *dev) = {
        au1x_board_init,
};

static int
au1x00_pcmcia_skt_state(struct au1000_pcmcia_socket *skt)
{
        struct pcmcia_state state;
        unsigned int stat;

        memset(&state, 0, sizeof(struct pcmcia_state));

        skt->ops->socket_state(skt, &state);

        stat = state.detect  ? SS_DETECT : 0;
        stat |= state.ready  ? SS_READY  : 0;
        stat |= state.wrprot ? SS_WRPROT : 0;
        stat |= state.vs_3v  ? SS_3VCARD : 0;
        stat |= state.vs_Xv  ? SS_XVCARD : 0;
        stat |= skt->cs_state.Vcc ? SS_POWERON : 0;

        if (skt->cs_state.flags & SS_IOCARD)
                stat |= state.bvd1 ? SS_STSCHG : 0;
        else {
                if (state.bvd1 == 0)
                        stat |= SS_BATDEAD;
                else if (state.bvd2 == 0)
                        stat |= SS_BATWARN;
        }
        return stat;
}

/*
 * au100_pcmcia_config_skt
 *
 * Convert PCMCIA socket state to our socket configure structure.
 */
static int
au1x00_pcmcia_config_skt(struct au1000_pcmcia_socket *skt, socket_state_t *state)
{
        int ret;

        ret = skt->ops->configure_socket(skt, state);
        if (ret == 0) {
                skt->cs_state = *state;
        }

        if (ret < 0)
                debug("unable to configure socket %d\n", skt->nr);

        return ret;
}

/* au1x00_pcmcia_sock_init()
 *
 * (Re-)Initialise the socket, turning on status interrupts
 * and PCMCIA bus.  This must wait for power to stabilise
 * so that the card status signals report correctly.
 *
 * Returns: 0
 */
static int au1x00_pcmcia_sock_init(struct pcmcia_socket *sock)
{
        struct au1000_pcmcia_socket *skt = to_au1000_socket(sock);

        debug("initializing socket %u\n", skt->nr);

        skt->ops->socket_init(skt);
        return 0;
}

/*
 * au1x00_pcmcia_suspend()
 *
 * Remove power on the socket, disable IRQs from the card.
 * Turn off status interrupts, and disable the PCMCIA bus.
 *
 * Returns: 0
 */
static int au1x00_pcmcia_suspend(struct pcmcia_socket *sock)
{
        struct au1000_pcmcia_socket *skt = to_au1000_socket(sock);

        debug("suspending socket %u\n", skt->nr);

        skt->ops->socket_suspend(skt);

        return 0;
}

static DEFINE_SPINLOCK(status_lock);

/*
 * au1x00_check_status()
 */
static void au1x00_check_status(struct au1000_pcmcia_socket *skt)
{
        unsigned int events;

        debug("entering PCMCIA monitoring thread\n");

        do {
                unsigned int status;
                unsigned long flags;

                status = au1x00_pcmcia_skt_state(skt);

                spin_lock_irqsave(&status_lock, flags);
                events = (status ^ skt->status) & skt->cs_state.csc_mask;
                skt->status = status;
                spin_unlock_irqrestore(&status_lock, flags);

                debug("events: %s%s%s%s%s%s\n",
                        events == 0         ? "<NONE>"   : "",
                        events & SS_DETECT  ? "DETECT "  : "",
                        events & SS_READY   ? "READY "   : "",
                        events & SS_BATDEAD ? "BATDEAD " : "",
                        events & SS_BATWARN ? "BATWARN " : "",
                        events & SS_STSCHG  ? "STSCHG "  : "");

                if (events)
                        pcmcia_parse_events(&skt->socket, events);
        } while (events);
}

/* 
 * au1x00_pcmcia_poll_event()
 * Let's poll for events in addition to IRQs since IRQ only is unreliable...
 */
static void au1x00_pcmcia_poll_event(unsigned long dummy)
{
        struct au1000_pcmcia_socket *skt = (struct au1000_pcmcia_socket *)dummy;
        debug("polling for events\n");

        mod_timer(&skt->poll_timer, jiffies + AU1000_PCMCIA_POLL_PERIOD);

        au1x00_check_status(skt);
}

/* au1x00_pcmcia_get_status()
 *
 * From the sa11xx_core.c:
 * Implements the get_status() operation for the in-kernel PCMCIA
 * service (formerly SS_GetStatus in Card Services). Essentially just
 * fills in bits in `status' according to internal driver state or
 * the value of the voltage detect chipselect register.
 *
 * As a debugging note, during card startup, the PCMCIA core issues
 * three set_socket() commands in a row the first with RESET deasserted,
 * the second with RESET asserted, and the last with RESET deasserted
 * again. Following the third set_socket(), a get_status() command will
 * be issued. The kernel is looking for the SS_READY flag (see
 * setup_socket(), reset_socket(), and unreset_socket() in cs.c).
 *
 * Returns: 0
 */
static int
au1x00_pcmcia_get_status(struct pcmcia_socket *sock, unsigned int *status)
{
        struct au1000_pcmcia_socket *skt = to_au1000_socket(sock);

        skt->status = au1x00_pcmcia_skt_state(skt);
        *status = skt->status;

        return 0;
}

/* au1x00_pcmcia_get_socket()
 * Implements the get_socket() operation for the in-kernel PCMCIA
 * service (formerly SS_GetSocket in Card Services). Not a very
 * exciting routine.
 *
 * Returns: 0
 */
static int
au1x00_pcmcia_get_socket(struct pcmcia_socket *sock, socket_state_t *state)
{
  struct au1000_pcmcia_socket *skt = to_au1000_socket(sock);

  debug("for sock %u\n", skt->nr);
  *state = skt->cs_state;
  return 0;
}

/* au1x00_pcmcia_set_socket()
 * Implements the set_socket() operation for the in-kernel PCMCIA
 * service (formerly SS_SetSocket in Card Services). We more or
 * less punt all of this work and let the kernel handle the details
 * of power configuration, reset, &c. We also record the value of
 * `state' in order to regurgitate it to the PCMCIA core later.
 *
 * Returns: 0
 */
static int
au1x00_pcmcia_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
{
  struct au1000_pcmcia_socket *skt = to_au1000_socket(sock);

  debug("for sock %u\n", skt->nr);

  debug("\tmask:  %s%s%s%s%s%s\n\tflags: %s%s%s%s%s%s\n",
        (state->csc_mask==0)?"<NONE>":"",
        (state->csc_mask&SS_DETECT)?"DETECT ":"",
        (state->csc_mask&SS_READY)?"READY ":"",
        (state->csc_mask&SS_BATDEAD)?"BATDEAD ":"",
        (state->csc_mask&SS_BATWARN)?"BATWARN ":"",
        (state->csc_mask&SS_STSCHG)?"STSCHG ":"",
        (state->flags==0)?"<NONE>":"",
        (state->flags&SS_PWR_AUTO)?"PWR_AUTO ":"",
        (state->flags&SS_IOCARD)?"IOCARD ":"",
        (state->flags&SS_RESET)?"RESET ":"",
        (state->flags&SS_SPKR_ENA)?"SPKR_ENA ":"",
        (state->flags&SS_OUTPUT_ENA)?"OUTPUT_ENA ":"");
  debug("\tVcc %d  Vpp %d  irq %d\n",
        state->Vcc, state->Vpp, state->io_irq);

  return au1x00_pcmcia_config_skt(skt, state);
}

int 
au1x00_pcmcia_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *map)
{
        struct au1000_pcmcia_socket *skt = to_au1000_socket(sock);
        unsigned int speed;

        if(map->map>=MAX_IO_WIN){
                debug("map (%d) out of range\n", map->map);
                return -1;
        }

        if(map->flags&MAP_ACTIVE){
                speed=(map->speed>0)?map->speed:AU1000_PCMCIA_IO_SPEED;
                skt->spd_io[map->map] = speed;
        }

        map->start=(ioaddr_t)(u32)skt->virt_io;
        map->stop=map->start+MAP_SIZE;
        return 0;

}  /* au1x00_pcmcia_set_io_map() */


static int 
au1x00_pcmcia_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *map)
{
        struct au1000_pcmcia_socket *skt = to_au1000_socket(sock);
        unsigned short speed = map->speed;

        if(map->map>=MAX_WIN){
                debug("map (%d) out of range\n", map->map);
                return -1;
        }

        if (map->flags & MAP_ATTRIB) {
                skt->spd_attr[map->map] = speed;
                skt->spd_mem[map->map] = 0;
        } else {
                skt->spd_attr[map->map] = 0;
                skt->spd_mem[map->map] = speed;
        }

        if (map->flags & MAP_ATTRIB) {
                map->static_start = skt->phys_attr + map->card_start;
        }
        else {
                map->static_start = skt->phys_mem + map->card_start;
        }

        debug("set_mem_map %d start %08lx card_start %08x\n",
                        map->map, map->static_start, map->card_start);
        return 0;

}  /* au1x00_pcmcia_set_mem_map() */

static struct pccard_operations au1x00_pcmcia_operations = {
        .init                   = au1x00_pcmcia_sock_init,
        .suspend                = au1x00_pcmcia_suspend,
        .get_status             = au1x00_pcmcia_get_status,
        .get_socket             = au1x00_pcmcia_get_socket,
        .set_socket             = au1x00_pcmcia_set_socket,
        .set_io_map             = au1x00_pcmcia_set_io_map,
        .set_mem_map            = au1x00_pcmcia_set_mem_map,
};

static const char *skt_names[] = {
        "PCMCIA socket 0",
        "PCMCIA socket 1",
};

struct skt_dev_info {
        int nskt;
};

int au1x00_pcmcia_socket_probe(struct device *dev, struct pcmcia_low_level *ops, int first, int nr)
{
        struct skt_dev_info *sinfo;
        int ret, i;

        sinfo = kmalloc(sizeof(struct skt_dev_info), GFP_KERNEL);
        if (!sinfo) {
                ret = -ENOMEM;
                goto out;
        }

        memset(sinfo, 0, sizeof(struct skt_dev_info));
        sinfo->nskt = nr;

        /*
         * Initialise the per-socket structure.
         */
        for (i = 0; i < nr; i++) {
                struct au1000_pcmcia_socket *skt = PCMCIA_SOCKET(i);
                memset(skt, 0, sizeof(*skt));

                skt->socket.resource_ops = &pccard_static_ops;
                skt->socket.ops = &au1x00_pcmcia_operations;
                skt->socket.owner = ops->owner;
                skt->socket.dev.dev = dev;

                init_timer(&skt->poll_timer);
                skt->poll_timer.function = au1x00_pcmcia_poll_event;
                skt->poll_timer.data = (unsigned long)skt;
                skt->poll_timer.expires = jiffies + AU1000_PCMCIA_POLL_PERIOD;

                skt->nr         = first + i;
                skt->irq        = 255;
                skt->dev        = dev;
                skt->ops        = ops;

                skt->res_skt.name       = skt_names[skt->nr];
                skt->res_io.name        = "io";
                skt->res_io.flags       = IORESOURCE_MEM | IORESOURCE_BUSY;
                skt->res_mem.name       = "memory";
                skt->res_mem.flags      = IORESOURCE_MEM;
                skt->res_attr.name      = "attribute";
                skt->res_attr.flags     = IORESOURCE_MEM;

                /*
                 * PCMCIA client drivers use the inb/outb macros to access the
                 * IO registers. Since mips_io_port_base is added to the
                 * access address of the mips implementation of inb/outb,
                 * we need to subtract it here because we want to access the
                 * I/O or MEM address directly, without going through this
                 * "mips_io_port_base" mechanism.
                 */
                if (i == 0) {
                        skt->virt_io = (void *)
                                (ioremap((phys_t)AU1X_SOCK0_IO, 0x1000) -
                                (u32)mips_io_port_base);
                        skt->phys_attr = AU1X_SOCK0_PSEUDO_PHYS_ATTR;
                        skt->phys_mem = AU1X_SOCK0_PSEUDO_PHYS_MEM;
                }
#ifndef CONFIG_MIPS_XXS1500
                else  {
                        skt->virt_io = (void *)
                                (ioremap((phys_t)AU1X_SOCK1_IO, 0x1000) -
                                (u32)mips_io_port_base);
                        skt->phys_attr = AU1X_SOCK1_PSEUDO_PHYS_ATTR;
                        skt->phys_mem = AU1X_SOCK1_PSEUDO_PHYS_MEM;
                }
#endif
                pcmcia_base_vaddrs[i] = (u32 *)skt->virt_io;
                ret = ops->hw_init(skt);

                skt->socket.features = SS_CAP_STATIC_MAP|SS_CAP_PCCARD;
                skt->socket.irq_mask = 0;
                skt->socket.map_size = MAP_SIZE;
                skt->socket.pci_irq = skt->irq;
                skt->socket.io_offset = (unsigned long)skt->virt_io;

                skt->status = au1x00_pcmcia_skt_state(skt);

                ret = pcmcia_register_socket(&skt->socket);
                if (ret)
                        goto out_err;

                WARN_ON(skt->socket.sock != i);

                add_timer(&skt->poll_timer);
        }

        dev_set_drvdata(dev, sinfo);
        return 0;

        do {
                struct au1000_pcmcia_socket *skt = PCMCIA_SOCKET(i);

                del_timer_sync(&skt->poll_timer);
                pcmcia_unregister_socket(&skt->socket);
out_err:
                flush_scheduled_work();
                ops->hw_shutdown(skt);

                i--;
        } while (i > 0);
        kfree(sinfo);
out:
        return ret;
}

int au1x00_drv_pcmcia_remove(struct device *dev)
{
        struct skt_dev_info *sinfo = dev_get_drvdata(dev);
        int i;

        down(&pcmcia_sockets_lock);
        dev_set_drvdata(dev, NULL);

        for (i = 0; i < sinfo->nskt; i++) {
                struct au1000_pcmcia_socket *skt = PCMCIA_SOCKET(i);

                del_timer_sync(&skt->poll_timer);
                pcmcia_unregister_socket(&skt->socket);
                flush_scheduled_work();
                skt->ops->hw_shutdown(skt);
                au1x00_pcmcia_config_skt(skt, &dead_socket);
                iounmap(skt->virt_io);
                skt->virt_io = NULL;
        }

        kfree(sinfo);
        up(&pcmcia_sockets_lock);
        return 0;
}


/*
 * PCMCIA "Driver" API
 */

static int au1x00_drv_pcmcia_probe(struct device *dev)
{
        int i, ret = -ENODEV;

        down(&pcmcia_sockets_lock);
        for (i=0; i < ARRAY_SIZE(au1x00_pcmcia_hw_init); i++) {
                ret = au1x00_pcmcia_hw_init[i](dev);
                if (ret == 0)
                        break;
        }
        up(&pcmcia_sockets_lock);
        return ret;
}


static struct device_driver au1x00_pcmcia_driver = {
        .probe          = au1x00_drv_pcmcia_probe,
        .remove         = au1x00_drv_pcmcia_remove,
        .name           = "au1x00-pcmcia",
        .bus            = &platform_bus_type,
        .suspend        = pcmcia_socket_dev_suspend,
        .resume         = pcmcia_socket_dev_resume,
};

static struct platform_device au1x00_device = {
        .name = "au1x00-pcmcia",
        .id = 0,
};

/* au1x00_pcmcia_init()
 *
 * This routine performs low-level PCMCIA initialization and then
 * registers this socket driver with Card Services.
 *
 * Returns: 0 on success, -ve error code on failure
 */
static int __init au1x00_pcmcia_init(void)
{
        int error = 0;
        if ((error = driver_register(&au1x00_pcmcia_driver)))
                return error;
        platform_device_register(&au1x00_device);
        return error;
}

/* au1x00_pcmcia_exit()
 * Invokes the low-level kernel service to free IRQs associated with this
 * socket controller and reset GPIO edge detection.
 */
static void __exit au1x00_pcmcia_exit(void)
{
        driver_unregister(&au1x00_pcmcia_driver);
        platform_device_unregister(&au1x00_device);
}

module_init(au1x00_pcmcia_init);
module_exit(au1x00_pcmcia_exit);